Views: 6 Author: Site Editor Ɣeyiɣi si Wotae: 2024-04-12 Dzɔtsoƒe: Teƒe
PVC akaɖi ƒe ʋuƒo nye plastik gbadzɛ siwo sesẽ alo esiwo sesẽ afã kple afã siwo wozãna tsɔ naa xɔtuɖoɖo, kekeli ƒe kaka kple atsyɔ̃ɖoɖo ƒe anyigba le kplɔ̃dzikaɖiwo, anyigbakaɖiwo, akaɖi siwo wotsɔ ƒo xlãe, glidzikaɖiwo kple ememe akaɖi bubuwo me. Le alesi wowɔe kple eƒe gota gome ƒe nuwuwu nu la, akaɖi ƒe nɔnɔme PVC ate ŋu ana kekeli si le tẽ nafa, aɖe keklẽ si wokpɔna dzi akpɔtɔ, aɣla kekelitsoƒea eye wòana megbenya si li ke na avɔ, gli, agbalẽtata alo atsyɔ̃ɖoɖo bubuwo.
Gake le akaɖiwɔlawo gome la, ele be PVC ƒe agbalẽ tiatia nabia nu geɖe wu aŋe ɣi tiatia ko. Dɔwɔwɔ mamlɛtɔ nɔ te ɖe eƒe titrime, eƒe sesẽme, eƒe keklẽ, eƒe keklẽ si me mekɔ o, kekeli ƒe kaka, eƒe anyigba ƒe nuwuwu, amadede, agbalẽtata alo lamination ƒe ɖoɖo, akaɖi ƒe nɔnɔme, kekeli-tsoƒe ƒe dzoxɔxɔ kple dedienɔnɔ ŋuti nyatakaka siwo hiã dzi.
Mɔfiame sia ɖe alesi PVC akaɖi ƒe nuzazãwo wɔa dɔe, alesi adzɔnuwo wɔlawo ateŋu atia dzesi si sɔ kple parameter siwo wòle be woade eme ne wole kpɔɖeŋu alo nyayɔyɔ biam hena asitsatsa ƒe akaɖiwo wɔwɔ.
PVC akaɖi ƒe agbalẽvi nye kekelidzikpɔkpɔ kple xɔtunu si wowɔ tso polyvinyl chloride me hena zazã le akaɖi ƒe xɔtutu me alo abe eƒe akpa aɖe ene. Woate ŋu anae le nɔnɔme sesẽ alo sesẽ afã me le sesẽme si hiã kple wɔwɔme ƒe nɔnɔme nu.
To vovo na PVC si me kɔ dzro , si wotia ne nukpɔkpɔ to agbalẽa dzi le vevie la, zi geɖe la, akaɖi ƒe nuzazãwo nɔa keklẽm, notsi ɣi, matte, tsikpe alo nuŋɔŋlɔ ale be wòkaka kekeli tsɔ wu be wòatsɔ akaɖi alo LED dzɔtsoƒe ƒe nɔnɔmetata ɖaɖɛ aɖe aɖo ɖa.
Le avɔ ƒe akaɖi siwo ƒe megbe sesẽ me la, PVC ƒe akpaa ateŋu anye xɔtuɖoɖo ƒe kpeɖeŋutɔ hã esime gota avɔ, gli alo atsyɔ̃ɖoɖo ƒe ƒuƒoƒo naa dzedzeme mamlɛtɔ si woate ŋu akpɔ.
Kekeli ƒe kaka ɖɔa kekeli si wokpɔna toa PVC ƒe akpaa me. Zi geɖe la, grade si me kɔ wu ɖea mɔ na keklẽ geɖe wu, gake atike si me mekɔ o alo esi le ɣie abe notsi ene ya ɣlaa bulb la nyuie wu eye wònana wòdzena nyuie wu.
Asixɔxɔ ɖeka aɖeke meli si sɔ nyuie na akaɖi ɖesiaɖe o. Dadasɔ nyuitɔ nɔ te ɖe akaɖi ƒe lolome, LED ƒe dodo, didime si le kekelitsoƒe kple vɔvɔli dome, gota avɔ kple yame ƒe ŋusẽkpɔɖeamedzi si wodi dzi.
Diffusion ɖɔ alesi agbalẽa kaka kekeli si gbɔna ɖe mɔ vovovowo nu nyuie. Diffuser si wotia nyuie ɖea kekelitsoƒea ƒe nukpɔkpɔ dzi kpɔtɔna eye wòkpena ɖe ame ŋu be wòana kekeli nasɔ pɛpɛpɛ wu.
Ne agbalẽa me kɔ akpa na akaɖia ƒe nɔnɔme la, LED ɖekaɖekawo alo akaɖia ate ŋu anɔ dzedzem nyuie eye wòana teƒe siwo klẽna madze ame ŋu o. PVC si le ɣie abe notsi ene, matte, frosted alo textured ate ŋu akpe ɖe ŋuwò nàɖe teƒe dzodzoe siawo siwo woate ŋu akpɔ la dzi akpɔtɔ.
Ele be nuƒlelawo nada nusi wotsɔ wɔe la kpɔ le kekelitsoƒe ŋutɔŋutɔ si woɖo be woanɔ te tsɔ wu be woadrɔ̃ ʋɔnu kaka tso kpɔɖeŋu si me kekeli mele o ko me.
| PVC Akaɖi ƒe Ƒomevi | Nɔnɔme Veviwo | Zãzã Gbãtɔ |
|---|---|---|
| Notsi Yeye PVC | Enaa bulb la ɣlana nyuie wu eye wònaa kekeli si fa wu, si sɔ pɛpɛpɛ wu | Kplɔ̃dzikaɖiwo, anyigbakaɖiwo, pendants kple amedzrodzeƒe ƒe akaɖiwo |
| Nusi me kɔ PVC | Enaa kekeli geɖe toa eme esime wògaɖea nukpɔkpɔ tẽ dzi kpɔtɔna kokoko | Atsyɔ̃ɖoɖo ƒe vɔvɔliwo kple kekeli ƒe dodo ƒe nɔnɔme siwo klẽna wu |
| Matte / Frosted PVC | Dzedzeme si me keklẽ mele o kple eƒe anyigba fafɛ si wotsɔ wu enu | Egbegbe atsyɔ̃ɖoɖo kple asitsatsa ƒe akaɖiwo |
| Embossed / Textured PVC nuŋɔŋlɔ. | Etsɔa atsyɔ̃ɖoɖo ƒe nɔnɔme kpena ɖe eŋu esime wòle asi trɔm le kekeli ƒe nɔnɔme siwo wokpɔna ŋu | Aɖaŋuwɔla ƒe akaɖiwo kple amedzrowɔwɔ ƒe xɔmenuwo |
| Ameɖokui si wotsɔna léa nu ɖe nu ŋu PVC | Nusiwo wotsɔ léa nu ɖe avɔ alo gli ŋu la le eme alo wotsɔe kpe ɖe eŋu | Avɔ ƒe akaɖi siwo ƒe megbe sesẽ kple vɔvɔli ƒe ƒuƒoƒo si ƒe lolome lolo |
| Wotae PVC | Etsɔa atsyɔ̃ɖoɖo ƒe nɔnɔmetatawo, nɔnɔmetatawo alo dzesidenuwo ɖe asi | Asitsaƒe, amedzrowɔwɔ kple boblododo akaɖiwo |
Woateŋu awɔ akaɖi ƒe dzesi PVC alo awu enu be wòakaka kekeli eye wòaɖe kekelitsoƒea ƒe dzedzeme tẽ dzi akpɔtɔ. Esia na wòɖea vi na xɔtunu siwo me nukpɔkpɔ ƒe akɔfafa kple kekeli ƒe dzedzeme le vevie le.
Le eƒe titrime kple eƒe wɔwɔme nu la, woateŋu atso PVC eye woawɔe wòazu drum, cylinder, conical, rectangular kple akaɖi ƒe nɔnɔme bubuwo.
Woate ŋu abu Matte, frosted, smooth, glossy kple embossed effects ŋu le nukpɔkpɔ ƒe nɔnɔme kple kaka ƒe nudidi nu.
PVC ateŋu anye xɔtuɖoɖo ƒe megbe na avɔ, avɔ, gli, atsyɔ̃ɖoɖo film kple nu bubu siwo wotsɔ tsyɔa nu dzi. Ele be woazã nusi tututu wotsɔ tsyɔ nu nu dzi atsɔ aɖo kpe aŋenu ƒe ɖekawɔwɔ dzi.
Woateŋu ada PVC anyigba siwo sɔ la kpɔ hena screen printing, UV printing alo atsyɔ̃ɖoɖo ƒe agbalẽtata mɔnu bubuwo, si ana akaɖiwɔlawo nate ŋu awɔ nɔnɔmetata siwo wowɔ ɖe ɖoɖo nu kple vɔvɔli siwo wotsɔ ŋkɔ na.
PVC akaɖi ƒe akpa tsɛwo naa xɔtuɖoɖo evɔ wometsɔa kpekpeme si gbɔ eme kpena ɖe nusi wowɔ vɔ ŋu o, si ate ŋu ana tɔtrɔ, ƒoƒo ƒu kple eɖoɖo ɖe amewo nanɔ bɔbɔe.
Titrime kpɔa ŋusẽ ɖe akaɖi ƒe sesẽ, eƒe bɔbɔ, kpekpeme, lãɖeɖe ƒe nuwɔna kple akaɖi ƒe nɔnɔme si wowu enu dzi. Xexeame katã ƒe titrime aɖeke meli na aɖaŋu ɖesiaɖe o.
| Aɖaŋuɖoɖo ƒe | Nudidi Tiatia Ŋu bubu |
|---|---|
| Vɔvɔli Sue Siwo Woƒo | Dzeside si te ŋu trɔna bɔbɔe wu ate ŋu ana be woawɔe wòanɔ bɔbɔe. |
| Drum Vɔvɔli Gãwo | Ðewohĩ ahiã be wòasẽ wu be wòaɖe eƒe ʋuʋu dzi akpɔtɔ eye wòalé eƒe nɔnɔme si le gota la me ɖe asi. |
| Avɔ-Laminated Vɔvɔliwo | Ele be woawɔ ɖeka kple avɔa ƒe kpekpeme, nusi léna ɖe nu ŋu kple eƒe ʋuʋu ƒe didime. |
| Woƒe Tsitrenu Faa PVC Vɔvɔliwo | Ðewohĩ ahiã be ʋuƒoa nasẽ wu elabena gotagome avɔ aɖeke meli si alé xɔa ɖe te o. |
| Die-Cut ƒe Aɖaŋuwo | Kpe ɖe lãɖeɖe ƒe nyateƒetoto, nugbɔ ƒe nɔnɔme kple crease alo fold nuwɔna dzi hafi woawɔe le agbɔsɔsɔ gã me. |
Ele be woada akaɖinuwo kpɔ ɣesiaɣi ɖekae kple kekelitsoƒe ŋutɔŋutɔ. Wobua PVC akaɖi ƒe xɔtunuwo ŋu zi geɖe na LED kple akaɖi ƒe ɖoɖo bubu siwo me dzoxɔxɔ boo mele o, gake alesi wosɔe nɔ te ɖe fixture ƒe ɖoɖo bliboa dzi.
Nu veviwoe nye LED wattage, ʋukula ƒe dzoxɔxɔ, yaƒoƒo, didime si le kekelitsoƒea kple PVC panel dome, fixture geometry kple ememe dɔwɔwɔ ƒe dzoxɔxɔ si kɔkɔ wu.
Ele be nuƒlelawo nana subɔsubɔ ƒe dzoxɔxɔ si wokpɔ mɔ na ne wole nusiwo woatsɔ awɔ akaɖi yeye ƒe nɔnɔme biam. Mele be woatia akaɖiti ƒe nusi woatsɔ awɔe le esi wòsena le eɖokui me be fa miamiamia le nukpɔkpɔ ƒe dodokpɔ kpui aɖe me ta ko o.
Dzo ƒe nuwɔna ateŋu anye nudidi vevi aɖe le akaɖi ƒe akpa aɖewo me, vevietɔ le asitsatsa, amedzrowɔwɔ alo elektrik-nu siwo ŋu wowɔ ɖoɖo ɖo me. Ke hã, menye PVC agbalẽvi ɖesiaɖee ƒe hatsotso si me dzo mele o le ɖeka o.
Ne akaɖidɔ aɖe bia be woawɔ dɔ tɔxɛ aɖe si axe mɔ na dzo alo atsi eɖokui la, ele be nuƒlela natsɔ dzidzenu, hatsotso, titrime kple nɔnɔme si woazã mlɔeba si tututu wobia hafi atia nusiwo woatsɔ awɔe.
Ele be dodokpɔ ŋuti nuŋlɔɖi siwo doa alɔe nasɔ kple nusiwo ƒe dzeside tututu si wole ƒlem tsɔ wu be woabui tso nusiwo wotsɔ wɔe ƒe nuŋlɔɖi si nye PVC ƒe numeɖeɖe si bɔ me.
Woateŋu azã PVC ʋuƒo abe megbedede na kotoku, aklala, polyester, velvet kple atsyɔ̃ɖowu bubuwo ene. Ele be nusi wotsɔna léa nu ɖe nu ŋu nana kadodo si sɔ naƒo ɖi, ʋu nado to alo awɔ kuɖɔ siwo woate ŋu akpɔ ɖe akaɖiti si wowɔ vɔ la dzi o.
Woate ŋu atsɔ atsyɔ̃ɖonuwo ƒe gli kple pepa si wota hã abla ɖe megbe si sɔ PVC . Ele be nuƒlelawo nada adhesive ƒe ɖekawɔwɔ, didime ƒe liƒo kple laminated panel ƒe dzedzeme kpɔ ne wodo keklẽ.
Woateŋu azã agbalẽtata tẽ na nɔnɔmetatawo, dzesiwo kple atsyɔ̃ɖoɖo ƒe akaɖi siwo ŋu ŋkɔ le. Ele be woado anyigbadzidɔwɔwɔ, ink ƒe atikewɔwɔ kple eƒe dɔyɔyɔ ƒe nɔnɔmewo kpɔ be woaɖo kpe edzi be wolé ɖe wo nɔewo ŋu eye woaƒo asa na nu tsɛ PVC ƒe tɔtɔ.
PVC naa megbedede kple diffuser si wɔa dɔ nyuie na drum, cylinder, tapered kple kplɔ̃dzikaɖi ƒe vɔvɔli ƒe nɔnɔme bubuwo. Akpa siwo wotsɔ ɣie abe notsi ene alo esiwo wotsɔ avɔ wɔe ate ŋu akpe ɖe eŋu be kekeli nafa le yame.
Anyigba-kaɖi ƒe vɔvɔli siwo lolo wu ate ŋu abia be woatu ʋuƒo si sesẽ wu be wòalé nɔnɔme me ɖe asi esime wògaɖea mɔ na wo be woate ŋu atrɔ ɖe nɔnɔmewo ŋu wòade edeƒe be woate ŋu aƒo wo nu ƒu ɖe akaɖia ƒe xɔme.
Pendant lighting ateŋu azã PVC panels siwo me kɔ, amadede, wota alo avɔ tsyɔ edzi atsɔ awɔ atsyɔ̃ɖonuwo na aƒewo kple asitsaƒewo ƒe xɔmenuwo.
Zi geɖe la, amedzrodzeƒewo, nuɖuɖudzraƒewo kple amedzrodzeƒedɔwo bia be akaɖi ƒe amadede, eƒe gowo ƒe dzedzeme kple kekeli ƒe dodo le xɔtunu geɖewo me nasɔ ɖe enu. Eyata nukpɔkpɔ ƒe ɖekawɔwɔ tso hatsotso ɖeka me va zua nuƒle ƒe nudidi vevi aɖe.
PVC ƒe akpa siwo wota ateŋu ado alɔ akaɖi ƒe ɖeɖefia siwo ŋu ŋkɔ le, asitsaƒewo ƒe xɔmenuwo, ɖeɖefia ƒe nuzazãwo kple atsyɔ̃ɖoɖo ƒe boblododo ƒe ɖoɖowo.
PVC woateŋu abu diffuser alo shade panels hã ŋu na asitsatsa alo dɔwɔƒewo ƒe akaɖi ƒe ƒuƒoƒo tiatia siwo me woda asi ɖe nusi wotsɔ wɔe ƒe dzoxɔxɔ, dzo ƒe nuwɔna, atike ƒe dodo kple mɔ̃ɖaŋununya ƒe nudidiwo dzi na fixture tɔxɛa.
| Feature | PVC Akaɖi ƒe Agbalẽvi | Gbãtɔ Klɔ PVC |
|---|---|---|
| Nukpɔkpɔ ƒe Taɖodzinu | Kekelitsoƒea ƒe kaka kple ŋkuléle ɖe eŋu | Nukpɔkpɔ tẽ to agbalẽa dzi |
| Dzedzeme si bɔ | Translucent, notsi ɣi, matte, frosted alo textured | Edzena le gaglãgbe eye wòklẽna |
| Bulb ƒe Nukpɔkpɔ | Woɖea edzi le opacity kple diffusion nu | Zi geɖe la, wokpɔnɛ |
| Dɔwɔwɔ si Bɔ | Akaɖiwo kple atsyɔ̃ɖoɖo ƒe akaɖiwo | Fiafianuwo, bablawo, fabrication kple ametakpɔnu panels |
Menye PVC koe nye plastic si wozãna le akaɖinuwo me o. Nu nyuitɔ kekeake nɔ te ɖe nukpɔkpɔ ƒe dɔwɔwɔ, nuwɔwɔ ƒe nudidiwo, dzoxɔxɔ, dzedzeme kple ewɔwɔ ƒe gazazã dzi.
| Nusiwo Wozãna | Typical Ŋusẽ Tiatia | Bubu |
|---|---|---|
| PVC | Aɖaŋu si te ŋu trɔna bɔbɔe, amadede, agbalẽtata, lamination kple nuwɔwɔ le agbɔsɔsɔ gã me ŋutɔŋutɔ | Kpɔ dzoxɔxɔ si le dɔwɔwɔ me kple dzo ƒe nɔnɔme si hiã dzi |
| Acrylic / PMMA | Rigid optical panels kple diffuser kple atsyɔ̃ɖoɖo ƒe dzesi geɖewo | Sesẽme kple nuwɔwɔ ƒe nuwɔna vovovowo tso PVC tsɛ gbɔ. |
| PET / PETG | Viɖe le eŋu na akaɖi ƒe akpa tiatia siwo wowɔ, siwo me kɔ alo esiwo wotsɔ ɖo atsyɔ̃e | Ele be woada grade-specific forming kple optical nɔnɔmewo kpɔ |
| PP | Eƒe kpekpeme le bɔbɔe eye wòte ŋu trɔna ɖe nɔnɔmewo ŋu na vɔvɔli ƒe nɔnɔme bɔbɔe tiatia aɖewo | Ele be woaɖo kpe agbalẽtata, sesẽme kple dzoxɔxɔ ƒe hiahiãwo dzi |
Dze egɔme kple dzesidede nenye be woazã ʋuƒoa le kplɔ̃dzikaɖi, anyigbakaɖi, akaɖi si wotsɔna tsia dzi, gliɖoɖo, amedzrodzeƒe ƒe akaɖi alo atsyɔ̃ɖoɖo ƒe ƒuƒoƒo si wowɔ ɖe ɖoɖo nu me.
Tsɔ LED ƒomevi, wattage, dɔwɔwɔ ƒe dzoxɔxɔ kple didime tso agbalẽa gbɔ. Parameter siawo kpena ɖe ame ŋu be woakpɔe ɖa be PVC dzeside la sɔ na fixture si woɖo be woatsɔ awɔe hã.
Tso nya me nenye be ele be akaɖia naklẽ ɖe edzi, aɣla akaɖia sesĩe, ana akaɖi fafɛ si le yame nado alo wòana atsyɔ̃ɖoɖo ƒe nɔnɔme nadze.
Na akaɖi ƒe didime, kɔkɔme, nɔnɔme kple xɔmenuwo ƒe nɔnɔme. Nu siawoe afia nenye be agbalẽvi si le tsɛ wu si te ŋu trɔna bɔbɔe alo aŋe si sesẽ wu la sɔ wu.
Matte, frosted, glossy kple textured surfaces naa nukpɔkpɔ kple kekeli ƒe ŋusẽkpɔɖeamedzi vovovowo. Ele be woada kpɔɖeŋu ŋutɔŋutɔ aɖe kpɔ hafi awu nudɔdɔ gã aɖe nu.
Gblɔ na nudzrala la nenye be woagblẽ ʋuƒoa ɖi ƒuƒlu, woatae, atsɔ avɔ aƒo xlãe, woatsɔ gli ablae alo woatsɔ nusi wotsɔna léa nu ɖe eŋu anae.
Ne akaɖiti si wowu enu la hiã na dzotsitsi, elektrikŋusẽ, atike alo nutome ƒe nɔnɔme tɔxɛ aɖe la, na taɖodzinu si wobia le nusiwo woatsɔ awɔe tiatia me.
Ele be woada asi ɖe edzi mamlɛtɔ nyuie wu kple LED ŋutɔŋutɔ, akaɖi ƒe xɔtunu, avɔ kple xɔme-kaɖi ƒe nɔnɔmewo elabena PVC kpɔɖeŋu si me keklẽ mele o mate ŋu aɖe kaka ƒe ŋusẽkpɔɖeamedzi si wowu enu la afia bliboe o.
Nusiwo mewɔa tɔtrɔ o le vevie ŋutɔ ne akaɖiɖoɖo ɖeka zã akaɖiti alafa alo akpe geɖe siwo sɔ. Eyata ele be nyonyomedzikpɔkpɔ naxɔ agbalẽa ƒe nyonyome ŋutɔŋutɔ kple eƒe dzedzeme le kekeli te siaa.
Titrime ƒe ɖekawɔwɔ
Sheet alo agbalẽ xatsaxatsa ƒe kekeme
Amadede kple ɣie ƒe ɖekawɔwɔ
Opacity kple translucency
Kekeli ƒe kaka le kekelitsoƒe si ŋu woƒo nu tsoe te
Anyigba ƒe ʋuʋudedi, teƒeteƒewo kple ɖiƒoƒo
Flatness kple curl
Sesẽme kple bɔbɔ ƒe nɔnɔme
Agbalẽtata ƒe adhesion le afisi wòsɔ le
Adhesive coating ɖekawɔwɔ le afisi wòsɔ le
Lamination dzedzeme kple nutsyɔnu si dzi woda asi ɖo
Dɔwɔwɔ: kplɔ̃dzikaɖi, anyigbakaɖi, pendant, gli akaɖi, amedzrodzeƒe ƒe akaɖi alo fixture bubu.
Titrime: fifia ƒe titrime alo sesẽme si hiã.
Panel ƒe lolome: agbalẽ ƒe didime, panel siwo wotso alo agbalẽ xatsaxatsa ƒe kekeme.
Amadede: ɣi, notsi ɣi, translucent alo amadede si wowɔ ɖe ɖoɖo nu.
Optical nudidi: didi be woawɔ nu le gaglãgbe, opacity, kaka alo kpɔɖeŋu nufiame.
Nusiwo wotsɔ wu enu: matte, frosted, glossy, smooth alo embossed.
Kekelitsoƒe: LED ƒomevi, wattage kple dɔwɔwɔ ƒe dzoxɔxɔ si wokpɔ mɔ na.
Xɔtutu: ƒuƒlu PVC , avɔ laminated, wallpaper laminated, tata alo eɖokui-léna.
Avɔ alo nutsyɔnu: ɖo kpɔɖeŋu aɖe ɖa ne ele be woado aŋenu ƒe ɖekawɔwɔ kpɔ.
Agbalẽtata: screen printing, UV tata alo dɔwɔwɔ bubu si hiã.
Dedienɔnɔ ŋuti nyatakaka: na dzotsitsi alo sedziwɔwɔ ƒe taɖodzinu ɖesiaɖe si hiã.
Agbɔsɔsɔ: kpɔɖeŋu agbɔsɔsɔme, gbãtɔ ƒe ɖoɖo kple asitsatsa ƒe agbɔsɔsɔme si wobu.
Nubablɛ: agbalẽ, agbalẽ xatsaxatsa, pallet alo dɔ aɖe koŋ ƒe nubablɛ siwo wotsɔ ɖoa duta.
Akaɖi wɔlawo ateŋu ana panel ƒe didime siwo wowu enu, akaɖi ƒe nɔnɔmetatawo alo agbalẽ xatsaxatsa ƒe nudidiwo ale be woateŋu aƒo nu tso nusiwo wotsɔ wɔe ƒe nɔnɔme ŋu ƒo xlã ewɔwɔ ƒe ɖoɖo ŋutɔŋutɔ.
Woateŋu ada dɔwo kpɔ le ɣie, nusiwo me mekɔ o, keklẽ si me kɔ, dzedzeme matte, nɔnɔme kple atsyɔ̃ɖoɖo ƒe nudidi bubu siwo wobia nu.
Nuƒlelawo ateŋu ana woƒe agbalẽtata ƒe mɔnu, avɔ, gli alo atsyɔ̃ɖoɖo ƒe nutsyɔnu ale be woateŋu ada alesi wosɔ ɖe wo nɔewo nu kpɔ hafi woawɔe le asitsatsa me.
Le akaɖinuwo ƒe dzedzeme-vevietɔ gome la, ele be woado ŋutilã me kpɔɖeŋuwo kpɔ hena amadede si me kekeli, kaka, opacity, sesẽ kple kpekpe ƒe dɔwɔwɔ hafi aɖo kpe nu gbogbo aɖewo dzi.
PVC akaɖi ƒe agbalẽ nye nusi sesẽ alo esi sesẽ ƒe akpa aɖe PVC si wozãna tsɔ naa xɔtuɖoɖo ƒe kpekpeɖeŋu kple kekeli dzi ɖuɖu le akaɖiwo me. Woate ŋu atsɔe ana kple nusiwo me kɔ, esiwo le ɣie abe notsi ene, esiwo ƒe amadede nye matte, esiwo wotsɔ tsikpe wɔe, esiwo wotsɔ nuŋɔŋlɔ wɔe alo atsyɔ̃ɖonu bubuwo.
PVC si me kɔ la ɖea mɔ na nukpɔkpɔ si me kɔ vie to nusiwo wotsɔ wɔe dzi. Akaɖiti si me kɔ PVC tsɔa kekeli ɖoa kekeli gake wòkakanɛ ale be nuwo kple akaɖi si le ʋuƒoa megbe la megadzena nyuie o.
Zi geɖe la, notsi ɣi, tsikpe kple kaka ƒe dzesi siwo lolo wu naa kekeli ƒe fafa sesẽ wu esi me kɔ ŋutɔ PVC . Ele be woatsɔ akaɖi ŋutɔŋutɔ kple gotagome nutsyɔnu ado eƒe dzedzeme mamlɛtɔ kpɔ.
Titrime nɔ te ɖe akaɖi ƒe didime, kɔkɔme, sesẽ si hiã, bending radius, frame design kple nenye be woatsɔ avɔ alo atsyɔ̃ɖonu bubu aƒo xlã PVC la.
PVC woateŋu azã akaɖi ƒe nuzazã le LED akaɖi ƒe nɔnɔme siwo sɔ me, gake ele be nuƒlelawo naɖo kpe LED ƒe ŋusẽ, yaƒoƒo, didime tso akaɖitsoƒea gbɔ kple dɔwɔwɔ ƒe dzoxɔxɔ si sɔ gbɔ wu le nusi wotsɔ ɖoa xɔa me dzi.
Kekelitsoƒe siwo me dzoxɔxɔ le wu hiã be woada wo kpɔ bubuwo. Mele be woada asi ɖe nusi wotsɔ wɔe dzi o vaseɖe esime woɖo kpe nusi wotsɔ blae ƒe dzoxɔxɔ ŋutɔŋutɔ, bulb ƒe ŋusẽ, dometsotso kple dedienɔnɔ ƒe nudidi siwo sɔ dzi.
Dzo ƒe dɔwɔwɔ nɔ te ɖe PVC ƒe wɔwɔme tɔxɛ kple eƒe titrime dzi. Ne dɔ aɖe bia be woaɖo dzobibi ƒe hatsotso aɖe koŋ me la, na dzidzenu si sɔ pɛpɛpɛ ale be woate ŋu ada dzeside si sɔ kple nuŋlɔɖi siwo sɔ la kpɔ.
Ɛ̃. PVC ateŋu anye megbedede na avɔ ƒe akaɖiwo. Ele be woado aŋenu la kpɔ kple avɔ ŋutɔŋutɔ be woaɖo kpe kadodo ƒe ŋusẽ, dzedzeme, dzoxɔxɔ ƒe tsitretsitsi kple ɣeyiɣi didi ƒe ɖekawɔwɔ dzi.
Woate ŋu atsɔ gliɖoɖo kple atsyɔ̃ɖogbalẽ si sɔ la abla ɖe PVC megbe. Do aŋenu, pepa ƒe didime ƒe liƒo kple kekeli ƒe dzedzeme kpɔ hafi ewɔe.
Woateŋu ata PVC ƒe anyigba siwo wotia to agbalẽtata ƒe ɖoɖo siwo sɔ zazã me. Ele be woadze le anyigba dzi dzadzraɖo, ink tiatia, nɔnɔme siwo me woda gbe le kple alesi woalé ɖe eŋu la ŋu le nusi woɖo be woatsɔ awɔe dzi.
Woate ŋu ada xɔ siwo wotsɔ aŋe wɔe siwo wotsɔ aŋe wɔe la kpɔ be woate ŋu awɔ dɔ siwo sɔ hã. Ele be nuƒlelawo natsɔ avɔa, pepa alo nu bubu si woatsɔ ablae la ana kpe ɖe dɔwɔwɔ ƒe nɔnɔme siwo wokpɔ mɔ na ŋu.
Matte, frosted kple textured surfaces siwo sɔ ate ŋu akpe ɖe eŋu be woaɖe keklẽ sesẽ siwo le tẽe dzi akpɔtɔ ne wotsɔe sɔ kple glossy clear surface. Klẽ ƒe dɔwɔwɔ ŋutɔŋutɔ nɔ te ɖe akaɖia ƒe nɔnɔme bliboa dzi.
Woate ŋu aƒo nu tso amadede ƒe tɔtrɔ ɖe nɔnɔme nu ŋu hena ewɔwɔ ƒe agbɔsɔsɔme siwo sɔ. Ele be nuƒlelawo natsɔ ŋutilã me nufiame, amadede ƒe taɖodzinu alo kpɔɖeŋu si me kekeli le ana elabena amadede si wosusu ate ŋu atrɔ ne wodo akaɖia.
Ɛ̃. Wokafu kpɔɖeŋu dodokpɔ vevie elabena womate ŋu ada eƒe sesẽme, eƒe kaka, eƒe keklẽ, amadede si me kekeli le, avɔ ƒe ƒoƒo ɖe eŋu kple dzoxɔxɔ ƒe dɔwɔwɔ kpɔ kakaɖedzitɔe tso fotowo ɖeɖeko me o.
Menye PVC resin koe ɖea akaɖi ƒe akpa si le nyonyome nyuitɔ me gɔme o. Nusi do tso eme si wowu enu la nɔ te ɖe kadodo si le agbalẽa ƒe titrime, eƒe sesẽme, eƒe keklẽ, eƒe kaka, eƒe anyigba ƒe nuwuwu, avɔ alo agbalẽtata, kekelitsoƒe ƒe dodo kple dɔwɔwɔ ƒe dzoxɔxɔ dome dzi.
Le akaɖiwɔlawo kple OEM nuƒlelawo gome la, mɔnu si ŋu kakaɖedzi le wue nye be woana akaɖi ƒe nɔnɔme, kekeli ƒe ŋusẽkpɔɖeamedzi si wodi, PVC ƒe didime, kekelitsoƒe ƒe nɔnɔme kple tɔtrɔmɔnu hafi atia agbalẽvi mamlɛtɔ.
Wallis ateŋu ada PVC agbalẽvi ƒe nudidi siwo wowɔ ɖe ɖoɖo nu na atsyɔ̃ɖoɖo ƒe akaɖidɔwo kpɔ le lolome, amadede, opacity, anyigba, agbalẽtata, lamination kple ewɔwɔ ƒe nɔnɔme si wobia nu.
