|
Wallis -PETG ƒe agbalẽ
Wallis ye nye esia
| Amadede: | |
|---|---|
| Titrime: | |
| Viɖe : Dɔwɔwɔ | |
| : | |
| Agbɔsɔsɔ: | |
Wallis PETG ati nuku xɔmenuwo ƒe akpa film nye atsyɔ̃ɖoɖo ƒe anyigba film si woate ŋu atrɔ asi le na xɔmenuwo ƒe akpawo, kabinet ʋɔtruwo, awudzraɖoƒewo, agbalẽdzraɖoƒewo, gli ƒe ʋuƒo, kple ememe ʋuƒo. Etsɔa atiwo ƒe nukpɔkpɔ ŋutɔŋutɔwo tsakana kple PETG ƒe anyigba si nɔa anyi didina, si ŋu kɔklɔ bɔbɔe hena xɔmenuwo wɔwɔ nyuie, si mewɔa tɔtrɔ o.
Wotrɔ asi le film sia ŋu na xɔmenuwo wɔlawo, atsyɔ̃ɖonuwo ƒe dɔwɔƒewo, laminators, xɔmenuwo ƒe kontraktɔ, kple mamalawo, eye woate ŋu akpɔe le ati nuku ƒe amadedewo kple anyigba ƒe nɔnɔmewo me na MDF, particleboard, plywood, PVC board, kple nu bubu siwo sɔ. Wallis ate ŋu atrɔ asi le nɔnɔmetata, nuwuwu, titrime, agbalẽ xatsaxatsa ƒe lolome, kple nubablɛwo ŋu wòasɔ ɖe wò dɔwɔwɔ kple dɔa ƒe nudidiwo nu.
Zã adzɔnuwo ŋuti nyatakaka siwo gbɔna siwo wozãna ɖaa abe gɔmedzedze ene. Ele be woaɖo kpe nɔnɔme mamlɛtɔ dzi ɖe wò substrate, adhesive, laminating process, dɔwɔwɔ ƒe taɖodzinu, kple nudɔdɔ ƒe agbɔsɔsɔ ŋu.
| Nu si wowɔ | PETG ati nuku xɔmenuwo panel film |
|---|---|
| Brand / Kpɔɖeŋu | Wallis / Wallis PETG ƒe agbalẽ |
| Eƒe titrime | 0.25–0.8 mm ƒe didime; tiatia siwo wowɔ ɖe ɖoɖo nu siwo li |
| Amadede Kple Kpɔɖeŋu | Ati ƒe nukuwo; oak, walnut, maple, teak, ash, kple nukpɔkpɔ siwo wowɔ ɖe ɖoɖo nu |
| Tiatia Siwo Le Anyigba Dzi | Matte, high gloss, smooth, embossed, kple nusiwo wowɔ ɖe ɖoɖo nu |
| Nɔnɔme Veviwo | Tiatia siwo me asibidɛwo mate ŋu aƒo o kple esiwo tsi tre ɖe asibidɛwo ƒe dzesi ŋu, anyigba si dzi tsi mate ŋu age ɖo o, atsyɔ̃ɖoɖo si mewɔa tɔtrɔ o, kple beléle na wo bɔbɔe |
| Substrates Siwo Sɔ Kple Wo Nɔewo | MDF, particleboard, plywood, PVC board, kple atsyɔ̃ɖonu siwo sɔ |
| Dɔbiagbalẽviwo | Kabinetwo, awudzraɖoƒewo, agbalẽdzraɖoƒewo, agbatsɔkekewo ƒe ŋgɔgbe, ʋɔtru siwo le eme, xɔmenuwo ƒe akpatawo, kple atsyɔ̃ɖoɖo na gli |
| Trɔ asi le eŋu | Kpɔɖeŋu, amadede, nuwuwu, titrime, agbalẽ xatsaxatsa ƒe lolome, ametakpɔnu ƒe atikewɔwɔ, kple nubablɛwo |
PETG, alo polyethylene terephthalate glycol si wotsɔ trɔ asi le eŋu, nye dzoxɔxɔnu sesẽ aɖe si woate ŋu awɔ. PETG atikutsetse film zãa atsyɔ̃ɖonu si wota alo woŋlɔ nu ɖe edzi tsɔ gbugbɔa dzɔdzɔmetiwo ƒe amadede kple nukuwo wɔa, emegbe enaa ametakpɔnu, si ŋu woate ŋu akɔ ɖo na xɔmenuwo ƒe akpa siwo wotsɔ lãgbalẽ wɔe.
To vovo na dzɔdzɔme nutsyɔnu, si toa vovo tso axa ɖeka dzi yi bubu dzi la, PETG film si wota ate ŋu ana nɔnɔme siwo woate ŋu agbugbɔ awɔ kple amadede si mewɔa tɔtrɔ o wu le ewɔwɔ ƒe hatsotsowo katã me. Ne wotsɔe sɔ kple atsyɔ̃ɖoɖo ƒe anyigba vevi aɖe la, PETG hã doa alɔ nukpɔkpɔ ƒe nɔnɔme deŋgɔwo abe ŋku ƒe keklẽ, falɛfalɛ matte, embossing, kple coordinated texture. Dɔwɔwɔ ŋutɔŋutɔ nɔ te ɖe xɔtutu, nusi wotsɔ blae, nusi wotsɔna léa nu ɖe nu ŋu, nusi woatsɔ awɔe, kple alesi woawɔe ƒe nɔnɔme siwo wotia dzi.
Atikutsetse ƒe nɔnɔmewo ate ŋu adzi ƒomevi nyanyɛwo abe oak, walnut, maple, teak, kple ash ene, kpakple gbeɖiɖi siwo me kɔ, viviti, akpaɖekedzimademade, alo esiwo wowɔ ɖe ɖoɖo nu. Nusiwo wota tsitotsito kple eƒe gota gome ƒe nɔnɔme naa nukpɔkpɔ ƒe goglome si hiã na egbegbe nuɖaƒewo, awudzraɖoƒewo, ɔfis xɔmenuwo, amedzrodzeƒea ƒe xɔmenuwo, asitsaƒewo ƒe nuzazãwo, kple aƒewo ƒe gliwo.
Tia matte alo soft-touch effects na xɔmenuwo si womede dzesii o, gloss gã na reflective premium panels, smooth finishes na beléle na wo bɔbɔe, alo embossed textures na ati si woate ŋu aka asi wu. Ðo Wallis ƒe kpɔɖeŋu ŋutɔŋutɔ, amadede ƒe nufiame, aɖaŋu ƒe faɛl, alo taɖodzinu ƒe ŋusẽkpɔɖeamedzi ale be woate ŋu ada xɔtutu si sɔ wu la kpɔ.
PETG film kpena ɖe ame ŋu wokpɔa laminated panels ta tso ƒoƒo, ɖiƒoƒo, asibidɛ ƒe dzesi, kple vuvu edziedzi me. Tsitretsitsi ƒe sesẽme tututu nɔ te ɖe nusi wotia be woatsɔ atsyɔ anyigba dzi dzi eye ele be woadoe kpɔ le alesi woɖoe be woazãe nu, vevietɔ le kplɔ̃, ʋɔtru, kple asitsaƒe siwo wozãna vevie gome.
Atsyɔ̃ɖoɖo si me ʋuʋudedi mele o la tutu le bɔbɔe eye mexɔa tsi abe ati siwo womewu enu haɖe o ene o. Le nuɖaƒewo, tsileƒewo, kple xɔmenuwo bubu siwo me tsi le gome la, ele kokoko be woazã nusi sɔ na xɔtunu si wowu enu, nusi wotsɔ léa nu ɖe eŋu, megbenya, kple nutrenu ƒe gowo be tsi nagage ɖe ʋuƒoa ƒe xɔtutu me o.
Agbalẽtata si dzi wokpɔna kple eƒe gowo ƒe nuwuwu kpena ɖe adzɔnuwo wɔlawo ŋu be woƒe dzedzeme nasɔ ɖe ɖoɖo nu le kabinet ƒe ʋɔtruwo, agbalẽdzraɖoƒe ƒe ŋgɔgbe, agbalẽdzraɖoƒewo, kple gli ƒe akpa siwo sɔ me. Gbugbɔgagblɔ sia doa alɔ adzɔnuwo nuƒoƒoƒu kple xɔmenuwo ƒe dɔ gã siwo me amadede kple nuku siwo mewɔa tɔtrɔ o le vevie le.
PETG nye dzoxɔxɔnu si woate ŋu azã ake le afisiwo nuƒoƒoƒu kple wo gbugbɔgazã ƒe tɔsisi siwo sɔ le. Ne woate ŋu agbugbɔ aŋe si wotsɔ lãgbalẽ wɔe si wowɔ vɔ la awɔ dɔe la nɔ te ɖe eƒe xɔtutu bliboa dzi, si me nusi wotsɔ blae, nusi wotsɔ blaa nu, nusi wotsɔ blae, kple nusiwo wogbugbɔ zãna le nutoa me hã le.
De PETG atikutsetse film ɖe kabinet ʋɔtruwo, awudzraɖoƒe ƒe ŋgɔgbe, agbalẽdzraɖoƒe ƒe mo, agbalẽdzraɖoƒewo, nudzraɖoƒewo, kple axadzikpawo ŋu be nàwɔ xɔmenuwo ƒe hatsotso si ƒe dzedzeme le abe ati ene si wɔ ɖeka si me dzɔdzɔmetɔtrɔ si le xɔmenuwo ŋutɔŋutɔ me manɔ o.
PETG ƒe atsyɔ̃ɖoɖo film naa kplɔ̃wo, kplɔ̃wo, amedzrodzeƒewo, nusiwo woɖena fiana, kple dɔwɔƒe bubu siwo le eme la kpɔa nu si nɔa anyi didina. Ðo kpe ʋuʋudedi, ɖiƒoƒo, dzoxɔxɔ, kple atikewo ƒe tsitretsitsi si hiã dzi hafi nàgblɔ film la na anyigba siwo le tsia dzi siwo bia nu geɖe.
Ati nuku PETG film ate ŋu awɔ ɖeka kple gli ƒe akpawo, mamawo, eme ʋɔtruwo, megbe gliwo, kple atsyɔ̃ɖoɖo ƒe ʋuƒo kple xɔmenuwo siwo ƒo xlãe. Esɔ na aƒewo, ɔfis, amedzrodzeƒe, xɔdɔme, asitsaƒewo, kple xɔmenuwo ƒe nɔnɔme bubuwo.
Nu eveawo siaa ate ŋu ana xɔmenuwo ƒe anyigba nadze ame ŋu, gake wokpɔa ewɔwɔ ƒe hiahiã vovovowo gbɔ. Zã tsɔtsɔ sɔ kple wo nɔewo sia abe dzɔtsoƒe ƒe mɔfiame ene eye nàda asi ɖe nya mamlɛawo dzi kple kpɔɖeŋuwo kple dɔwɔwɔ dodokpɔ.
| Nyametsotso Factor | PETG Ati nuku Film | Dzɔdzɔme Ati Veneer |
|---|---|---|
| Dzedzeme | Nuku siwo wota gbugbɔgagblɔ kple amadede kple nuwuwu siwo woate ŋu atia | Dzɔdzɔme nuku tɔxɛ kple vovototo si le agbalẽwo dome |
| Nuwɔwɔ ƒe Ðekawɔwɔ | Nukpɔkpɔ ƒe gbugbɔgagblɔ si kɔkɔ na xɔmenuwo nuƒoƒoƒu siwo wowɔ ɖekae | Dzɔdzɔme vɔvɔli kple nukuwo ƒe sɔsɔ ate ŋu abia be woatiae |
| Nu dzadzraɖo | Anyigba si dzi woate ŋu akɔ bɔbɔe; beléle si ku ɖe nuwuwu koŋ ŋu gakpɔtɔ le dɔ wɔm | Beléle na wo nɔ te ɖe veneer si wotsɔ blae kple subɔsubɔ ƒe nɔnɔmewo dzi |
| Trɔ asi le eŋu | Woate ŋu agblɔ eƒe nɔnɔme, amadede, keklẽ, nɔnɔme, kple lolome | Ati ƒomevi siwo li, esiwo wotso, kple dzɔdzɔmenuwo ƒe seɖoƒe li nɛ |
| Nusi Sɔ Nyuitɔ Kekeake | Scalable xɔmenuwo panel wɔwɔ kple repeatable aɖaŋuwo | Dɔ siwo tsɔa dzɔdzɔmenuwo ƒe nɔnɔme vavãtɔ ɖoa nɔƒe gbãtɔ |
Ati ƒe gbeɖiɖiwo nana dzoxɔxɔ, dzɔdzɔmenuwo ƒe nɔnɔme, kple nukpɔkpɔ ƒe goglome nɔa egbegbe xɔmenuwo ŋu. Oak-ti si me kɔ ƒe ŋusẽkpɔɖeamedziwo sɔ na Scandinaviatɔwo kple teƒe siwo mebɔ o; walnut kple ati viviwo ƒe ŋusẽkpɔɖeamedziwo doa alɔ xɔmenuwo xoxo alo atsyɔ̃ɖoɖo; nuku siwo medea akpa aɖeke dzi o ate ŋu awɔ ɖeka kple kabinet gãwo ƒe ɖoɖowo kple asitsatsa ƒe xɔmenuwo.
Sinimaƒome ɖeka ate ŋu atsɔ xɔmenuwo, ʋɔtruwo, kple gliwo aƒo ƒui le dɔ aɖe me. Atsyãwɔlawo ate ŋu ada asɔ le amadede fafɛwo kple ati ƒe gbeɖiɖi siwo me dzo le me, azã nuku siwo wotsɔ ŋlɔ nu ɖe wo nɔewo ŋu hena asikaka wo nɔewo ƒe vovototo, alo atia nusi klẽna ŋutɔ be woatsɔ awɔ anyigba si klẽna wu, si sɔ ɖe ɣeyiɣia nu.
Ma substrate ƒomevi, panel didime, adhesive ɖoɖo, laminating alo wɔwɔ mɔnu, nuwuwu zazã nɔnɔme, kple dɔwɔwɔ si hiã. Nyatakaka siawo kpena ɖe ame ŋu wòdea dzesi film ƒe wɔwɔme kple eƒe titrime si sɔ.
Tia ati ƒe nɔnɔme si li xoxo alo nàɖo nufiame aɖe ɖa be wòasɔ ɖe enu ɖe ɖoɖo nu. Ðo kpe taɖodzinu ƒe keklẽ, nɔnɔme, asibidɛ ƒe dzesi si tsi tre ɖe asibidɛ ƒe dzesi nu ƒe nudidi, ametakpɔnu, agbalẽ xatsaxatsa ƒe didime, kple nubablɛwo dzi.
Do kpɔɖeŋua kpɔ kple nusi le ete ŋutɔŋutɔ, nusi wotsɔna léa nu ɖe eŋu, dɔwɔnuwo, dzoxɔxɔ, nyaƒoɖeamenu, kple ɣeyiɣi si wotsɔ ƒoa xlãe. Kpɔ alesi wòléna ɖe nu ŋu, amadede, keklẽ, nuwɔwɔ ƒe nuwɔna, eƒe anyigba ƒe tsitretsitsi, nugbɔ ƒe dɔwɔwɔ, kple eƒe dzedzeme ɖa hafi nàda asi ɖe ewɔwɔ le agbɔsɔsɔ gã me dzi.
Na agbɔsɔsɔ si hiã kple teƒe si woaɖoe ɖe wò ale be Wallis nate ŋu aɖo kpe nyatakaka mamlɛtɔ, tɔtrɔ si li, nudɔdɔ suetɔ kekeake si wobia, ewɔwɔ ƒe ɖoɖowɔɖi, nu babla ƒe mɔnu, kple ga home si woayɔ dzi.
Ati nukuwo ƒe atsyɔ̃ɖoɖo ŋutɔŋutɔ na xɔmenuwo kple xɔmenuwo
0.25–0.8 mm ƒe titrime ƒe didime kple tiatia siwo wowɔ ɖe ɖoɖo nu
Matte, high gloss, smooth, embossed, kple esi tsi tre ɖe asibidɛwo ƒe dzesi ƒe anyigba ƒe tiatia
Egbɔkpɔnuwo na MDF, particleboard, plywood, PVC board, kple panels siwo sɔ
Kpɔɖeŋu siwo wowɔ ɖe ɖoɖo nu, amadedewo, agbalẽ xatsaxatsa ƒe lolome, ametakpɔnu, kple nubablɛwo
Kpɔɖeŋu ƒe dodokpɔ ƒe kpekpeɖeŋu na xɔmenuwo dɔwɔƒewo, laminators, kontraktɔ, kple mamalawo
Te ɖe Wallis ŋu hena PETG Film si wowɔ ɖe ɖoɖo nu
Enye atsyɔ̃ɖoɖo si wotu ɖe PETG dzi si wota alo wowɔe wòɖi dzɔdzɔmetiwo. Wotsɔa xɔmenuwo ƒe akpa siwo sɔ la ƒoa film la nu be wòana ati ƒe dzedzeme nasɔ pɛpɛpɛ eye wòanɔ anyi eteƒe nadidi eye wòate ŋu akɔ.
Nusiwo bɔ ɖe anyigba te dometɔ aɖewoe nye MDF, particleboard, plywood, PVC board, kple atsyɔ̃ɖonu bubuwo. Nusiwo sɔ ɖe wo nɔewo nu nɔ te ɖe alesi wodzrae ɖo le anyigba dzi, alesi woatia nusi wotsɔ léa nu ɖe nu ŋu, dɔwɔnuwo, kple alesi wowɔa dɔe dzi, eyata wokafui be woado ewɔwɔ kpɔ.
Titrime ƒe didime si woŋlɔ ɖi enye 0.25–0.8 mm. Te ɖe Wallis ŋu kple wò substrate, dɔwɔwɔ ƒe mɔnu, kple taɖodzinu ƒe dɔwɔwɔ be nàɖo kpe eƒe titrime si sɔ wu kple eƒe anyinɔnɔ ɖe ɖoɖo nu dzi.
PETG film ate ŋu ana wòate ŋu anɔ te ɖe ʋuʋudedi, ɖiƒoƒo, kple tsidzadza si wowɔna edziedzi nu nyuie, gake menye nusi womate ŋu agblẽ o. Dɔwɔwɔ toa vovo le nusi wotsɔ blae kple xɔtutu nu. Le teƒe siwo fa miamiamia la, egahiã na nusi wotsɔ léa nu ɖe eŋu si sɔ, nusi me tsi mate ŋu age ɖo o, kple eƒe go siwo wotu nyuie.
Wotrɔ asi le adzɔnu sia ŋu koŋ na xɔmenuwo kple xɔmenuwo ƒe xɔmenuwo. Gbedoxɔ me zazã bia be woada asi ɖe UV ƒe liƒo, yame ƒe nɔnɔme, dzoxɔxɔ ƒe didime, nusiwo wotsɔna léa nu ɖe nu ŋu ƒe anyinɔnɔ, nusiwo le anyigba ƒe nɔnɔme, kple nutrenu ƒe nutrenu dzi le dɔa koŋ nu.
Ɛ̃. Woate ŋu aƒo nu tso nɔnɔmetata, amadede, keklẽ ƒe seƒe, embossing, anyigba ƒe nɔnɔme, titrime, agbalẽ xatsaxatsa ƒe didime, kple nubablɛwo ŋu. Ðo kpɔɖeŋu ŋutɔŋutɔ, amadede ƒe nufiame, alo aɖaŋu ƒe taɖodzinu ɖa be woadae kpɔ.
Laminate kpɔɖeŋu aɖe to board ŋutɔŋutɔ, adhesive, mɔ̃a ƒe ɖoɖowo, kple edge process zazã me. Kpɔ alesi wòléna ɖe nu ŋu, eƒe dzedzeme, amadede, keklẽ, eƒe gotagome tsitretsitsi, nuwɔwɔ ƒe nuwɔna, dzadzɛnyenye ƒe ŋuɖoɖo, kple dɔwɔwɔ le subɔsubɔ ƒe nɔnɔme siwo nèdi me.
Na kpɔɖeŋu kple nuwuwu si nèdi, eƒe titrime, kekeme alo agbalẽ xatsaxatsa ƒe lolome, agbɔsɔsɔme, nusi wotsɔ wɔe, dɔwɔwɔ ƒe mɔnu, dɔwɔwɔ ƒe nudidiwo, nubablɛ ƒe hiahiãwo, kple dukɔ si me woatsɔe ayi alo melidzeƒea. Nyatakaka blibo kpena ɖe Wallis ŋu wòdzraa aɖaŋuɖoɖo kple nyayɔyɔ si de pɛpɛpɛ wu ɖo.
