Unlocking di Potensial fɔ Wallis Plastic : Yu Ɔltimat Plastik Sɔlwɛshɔn

Plastik Shit, Film ɛn Kastɔm ​​Fabrikeshɔn Sɔlwɛshɔn fɔ B2B Baya dɛn

Fɔ pik di rayt plastic matirial nɔ jɔs min fɔ kɔmpia di prayz ɔ di we aw i luk. Prɔfɛshɔnal bayer dɛn fɔ evalyu di kayn matirial, tik, dimɛnshɔn, transparency, impak pefɔmɛns, tɛmpracha rɛsistɛns, kemikal kɔmpatibiliti, fɔm bihayvya, printin rikwaymɛnt, sɔfa finish, rigyuletɔri rikwaymɛnt ɛn daunstrim fabrikeshɔn.

Wallis de saplae bɔku bɔku plastic sheet, plastic film, kad-mɛkin matirial ɛn kɔstɔm fabricated plastic kɔmpɔnɛnt fɔ pak manifakta, thermoforming faktri, sayn prodyusɔ, displei manifakta, fɔnicha kɔmni, kad manifakta, distribyushɔn ɛn OEM kɔstɔma dɛn.

Di matirial pɔtfɔlio we de naw inklud PVC , PET , PETG , polikabɔnɛt, akrilik, ABS , polipropilɛn, PVC fom bɔd, layt gayd panɛl, smat-kad matirial ɛn fim dɛn we gɛt fɔ du wit am. Kastom prɔsesin kin inklud CNC routin, laser kɔt, day kɔt, printin, polish ɛn ɔda prɔjek-spɛsifi k kɔnvɔtin savis.

Dis gayd de ɛksplen di difrɛns bitwin di men plastic matirial dɛn, dɛn kɔmɔn aplikeshɔn ɛn di infɔmeshɔn we di wan dɛn we de bay fɔ gi we dɛn de aks fɔ sɛmpul ɔ kot.

Aw fɔ Pik di Rayt Plastik Matirial

No wan plastic sheet nɔ de we bɛtɛ fɔ ɛni aplikeshɔn. PVC , PET , PETG , PC , PMMA , ABS ɛn PP ɛvri wan de gi difrɛn balans pan ɔptik, mɛkanikal, tɛmal ɛn prɔsesin prɔpati.

PVC shit ɛn Film Sɔlwɛshɔn

PVC shit ɛn film riprizent wan pan di brayt plastic-matirial famili bikɔs PVC kin fɔmulayt as rigid shit, sɛmi-rigid film, fleksibul film, transparent shit, opaque shit, kad-grɛd matirial ɔ aplikeshɔn-spɛsifi k industrial matirial.

Rigid PVC shit di .

Rigid PVC sheet na fɔ thermoforming, printin, folding bɔks, kad prodakshɔn, protɛktiv panɛl ɛn industrial fabrication. Transparent gred dɛn kin yus mɔ we dɛn nid fɔ si di prɔdak.

PVC film

PVC film kin saplae in rigid, semi-rigid ɔ fleksibul kɔnfigyushɔn dipen pan di aplikeshɔn. Di tin dɛn we di fim nid fɔ no di tik, di wit, di transparency, di surface, di softness ɛn di we aw dɛn want fɔ kɔnvɔyt.

Kad-Grɛd PVC

Dɛn kin yuz spɛshal PVC kɔr ɛn Overlay film shit fɔ ID kad, RFID kad, bank kad, mɛmbaship kad, ɔtel ki kad ɛn ɔda laminated kad strɔkchɔ dɛn.

PVC foam board fɔ Sayn ɛn Displei dɛn

PVC fom bod de kam togɛda wan laytwɛt sɛlular strɔkchɔ wit wan rili smol sɔfays, we de mek i yusful fɔ sayn, ɛgzibishin displei, rital grafik, print panɛl, intɛriɔ dɛkɔreshɔn ɛn fabricated displei strɔkchɔ.

Fɔ print

Suitabl PVC fom bod surfaces kin sopot UV en oda kompitibul printin proses fo sain, advatayz displei en branded panɛl.

CNC ɛn Kɔt

Yu kin kɔt sheet dɛn to lɛta, panɛl ɛn ɔda shep dɛn. Di bod density, tiknes ɛn dimɛnshɔnal tolɛreshɔn we dɛn nid fɔ spɛsifa we mashin na pat pan di prɔjek.

Di Tin dɛn we Yu fɔ Tink Bɔt bɔt di Strukchɔ

PVC fom bod na wan we dɛn kin jɔs pik fɔ laytwɛt displei ɛn panɛl aplikeshɔn pas fɔ bi riplesmɛnt fɔ sɔlid injinɛri plastic insay strɔkchɔral pat dɛn we gɛt bɔku lod.

PET shit fɔ Tɛmofɔmin ɛn Pakɛj

PET sheet na big wan we dɛn kin pik fɔ klia thermoformed pak, blista pak, trey, klamshɛl, folding bɔks, printin ɛn ɔda aplikeshɔn dɛn we nid gud prodak visibiliti ɛn stebul kɔnvɔtin pefɔmɛns.

Klia Tɛmofɔmin PET

Klia PET de gi transparent prodak prɛzɛntɛnshɔn fɔ kɔshɔma pak. Bayer fɔ spɛsifa tik, rol wit, fɔm dip, kaviti jɔyometri ɛn thermoforming ikwipmɛnt.

Print ɛn Fɔl Aplikeshɔn dɛn

PET kin yuz bak fɔ transparent print prodak ɛn fɔl-bɔks strɔkchɔ we di matirial sɔfa, kris bihayv ɛn ink sistɛm mach fayn fayn wan.

Fɔd ɛn Mɛdikal Pakɛj

Fɔd-kɔntakt, famasitik ɔ mɛdikal aplikeshɔn dɛn nid di rayt gred ɛn dɔkyumentri fɔ di ɛksaktɔl prɔdak ɛn di dɛstineshɔn makit. Jɛnɛral PET shit nɔ fɔ ɔtomɛtik asum fɔ mit ɛvri rigyuleted aplikeshɔn.

PETG shit fɔ Displei, Tɛmofɔmin ɛn Dɛkɔretiv Panɛl dɛn

PETG na glycol-modified polyester we valyu fɔ klia, taf ɛn fabrikeshɔn fleksibiliti. Dɛn kin yuz am fɔ displei, fɔm kɔmpɔnɛnt, protɛktiv prɔdak, kad matirial, dɛkɔretiv fɔnicha panɛl ɛn ɔda aplikeshɔn dɛn we nid transparent ɔ kala plastic wit gud prɔsesin pefɔmɛns.

Tɛmofɔmin we dɛn de mek

PETG fayn fɔ bɔku fɔm kɔmpɔnɛnt ɛn displei prodak. Tiknes, mold dizayn ɛn ɔt kɔndishɔn fɔ validet pan di ɛksaktɔ gred.

Fɛnichɔ ɛn Dɛkɔretiv Aplikeshɔn dɛn

Yu kin yuz ay-glos, mat, kala ɛn fɛnshɔnal PETG shit fɔ fɔnicha sɔfays ɛn dɛkɔretiv panɛl sistɛm usay apia ɛn daunstrim lamineshɔn pefɔmɛns impɔtant.

Card material na di s

PETG kor shit ɛn Overlay film s kin inkɔrpɔret bak insay laminated kad strɔkchɔ dɛn we nid difrɛn ɔt ɛn mɛkanikal prɔpati frɔm standad PVC kad dɛn.

Polycarbonate sheet fɔ Ay-Impakt ɛn Ay-Durabiliti Aplikeshɔn dɛn

Dɛn kin pik polycarbonate sheet we impak pefɔmɛns, tafnɛs ɛn ɔt rɛsistɛns impɔtant pas di kwaliti dɛn we jenɛral-pɔpɔs transparent plastic dɛn de gi.

Protektiv Glazing ɛn Mashin Gad dɛn

Klia PC kin yuz fɔ protɛktiv panɛl, mashin gad, sefty skrin ɛn fabrik kɔmpɔnɛnt dɛn. Dɛn fɔ difayn di impak retinj we dɛn nid ɛn di sefty standad dɛn we dɛn fɔ yuz bifo dɛn gri fɔ di matirial.

Print ɛn Fabrikeshɔn

Suitabl PC gred dɛn kin CNC mashin, print, drɔ ɛn tɛmfɔm. Sɔfayz tritmɛnt ɛn kɔtin kin nid fɔ skrach-sɛnsitiv ɔ ɔdasay aplikeshɔn.

Sikyuɔr Card material s

Dɛn kin yuz polikabɔnɛt kɔr ɛn Overlay film matirial dɛn bak fɔ lɔng-layf aydentifikeshɔn kad, drayva laysens ɛn ɔda sikyɔriti kredibiliti strɔkchɔ dɛn, mɔ we dɛn nid fɔ mek layz pɔsnalayzeshɔn ɔ multilayer PC kɔnstrɔkshɔn.

Acrylic sheet fɔ Sayn, Displei ɛn Dɛkɔretiv Fabrikeshɔn

Acrylic sheet , we dɛn kin kɔl bak PMMA , na yusful mɔ usay optik klia, dɛkɔretiv apinɛns, polish ed ɛn dizayn fleksibiliti impɔtant.

Klia Akrilik we yu kin yuz

Dɛn kin yuz Klia PMMA fɔ displei kes, glaz, rital fiks, transparent panɛl ɛn ɔda aplikeshɔn dɛn we nid ay transparency ɛn prɛmiɔm apinans.

Akrilik we gɛt kɔlɔ ɛn we dɛn kin dekɔret

Kɔlɔ, fluorescent, miro, glita, iridescent, tɛkstɔr ɛn ɔda dɛkɔretiv akrilik gred dɛn de alaw disayna ɛn displei manifakta dɛn fɔ mek vijual ifɛkt dɛn we at fɔ ajɔst wit kɔvɛnshɔnal klia plastic.

Kast vs. Akrilik we dɛn dɔn ɛkstrud

Kas ɛn ɛkstruded akrilik de gi difrɛn tiknɛs rɛnj, tolɛreshɔn ɛn fabrikeshɔn kwaliti dɛn. Di wan dɛn we de bay fɔ no di tin dɛn we dɛn nid fɔ kɔt wit lɛsa, CNC , polish, bɛnd ɛn thermoforming bifo dɛn pik wan gred.

Layt Gayd Panɛl fɔ LED Displei ɛn Layt

Dɛn mek akrilik layt gayd panɛl dɛn fɔ sheb layt frɔm wan ed-maunt ɔ ɔda we we dɛn dɔn kɔnfigyut LED sɔs akɔdin to wan big sɔfays.

Layt gayd pefɔmɛns dipen pan PMMA optik kwaliti, panɛl dimɛnshɔn, layt-sɔs pozishɔn, engrav ɔ print optik patɛn, riflɛkta dizayn ɛn di kɔmplit layt asɛmbli.

Tipik aplikeshɔn dɛn na LED advatayzmɛnt panɛl, mɛnyu bɔd, sayn, displei layt ɛn ɔda prɔdak dɛn we gɛt layt we nid fɔ kɔntrol layt distribyushɔn.

ABS sheet fɔ Tɛmofɔm ɛn Mashin Kɔmpɔnɛnt dɛn

ABS sheet de kam togɛda tafnɛs wit yusful thermoforming ɛn mashining prɔpati dɛm, we de mek i fayn fɔ ikwipmɛnt haus, ɔtomotiv intɛriɔ pat, bag kɔmpɔnɛnt, ɛnklɔzhɔ, displei ɛn ɔda fabricated plastic prodak dɛm.

Tɛmofɔmin we dɛn de mek

ABS kin tεmכfכm insay rili kכmpleks shep dεm we dεn kכntrכl di shit tik, di hεt kכndishכn, mכld jכmetri εn di wכl distribushכn we dεn nid kכrekt wan.

Di Opshɔn dɛn fɔ di Surface

Smɔl, tɛkstɔr ɛn kɔlɔ sɔfays dɛn kin tink bɔt akɔdin to di prɔdak dizayn. Ɔda projɛkt dɛn fɔ spɛsifa UV ɛksplɔshɔn bikɔs jenɛral-pɔpɔs ABS nɔ fɔ ɔtomɛtik asum fɔ gi lɔng tɛm ɛkstirian wɛda pefɔmɛns.

PP shit ɛn Film fɔ Kwɛmyuɛl ɛn Dɛkɔretiv Aplikeshɔn

Polipropilɛn de gi lɔw density ɛn yusful kemikal rɛsistɛns fɔ pak, industrial kɔmpɔnɛnt, stɔrɔj ​​sistɛm ɛn sɛlɛkɛt dɛkɔretiv ɔ fɔnicha aplikeshɔn.

Bikɔs polypropylene gɛt rili lɔw sɔfayz ɛnaji, prɔjɛkt dɛn we involv printin, kɔtin ɔ adhesive lamination fɔ difayn di sɔfayz tritmɛnt ɛn bonding sistɛm we dɛn nid.

Card material s ɛn Smart card Sɔlwɛshɔn dɛn

Wallis de saplae bak wan dediket kad matirial pɔtfɔlio fɔ ID kad, akses kad, RFID kad, bank kad, mɛmbaship kad, ɔtel kad, transpɔt kad ɛn ɔda laminated-kad prɔjek dɛn.

PVC , PETG ɛn PC Core sheet s

Yu kin pik di kɔr-shit matirial akɔdin to di printin, lamination, ɔt rɛsistɛns, durabiliti ɛn sikyɔriti rikwaymɛnt.

Overlay film Fim dɛn

Transparent Overlay film film dɛn de protɛkt di print kad kɔr dɛn ɛn dɛn kin inkɔrpɔret spɛshal tin dɛn lɛk magnɛtik strɛp, sikyɔriti ɛlimɛnt dɛn, kɔtin ɔ laserable funkshɔnaliti.

RFID Prelam Inlay na di s

RFID prelam inlays de kam togɛda wan chip ɛn ɛntena strɔkchɔ insay plastic layers fɔ printin afta dat, lamination ɛn kad panch. Chip tayp, antena dizayn, sheet layout ɛn fayn kad kɔnstrɔkshɔn fɔ difayn togɛda.

Fɔ dɔn Smart card s

Kad dɛn we dɔn dɔn kin intagret printin, RFID / NFC -kɔmpatibl tɛknɔlɔji, magnɛtik strɛp, pɔsnalayzeshɔn ɛn ɔda ficha dɛn akɔdin to di aplikeshɔn ɛn rida infrastukchɔ.

Kastom Plastik Fabrikeshɔn: Frɔm Shit to Finished Kɔmpɔnɛnt

Bɔku pipul dɛn we de bay B2B nɔ nid jɔs raw plastic sheet dɛn. Dɛn nid matirial we dɛn chenj to kɔmpɔnɛnt dɛn we kin muf dairekt insay asɛmbli, pak ɔ instɔleshɔn.

Plastik Shit dɛn we Dɛn Kɔt to Saiz

Kɔt-to-sayz saplai kin ridyus intanɛnt kɔt wok ɛn matirial west. Di wan dɛn we de bay fɔ gi fayn dimɛnshɔn, tolɛreshɔn, edj rikwaymɛnt, kwantiti ɛn matirial tik.

CNC Routin ɛn Mashin

CNC fabrikeshɔn kin mek profayl, ol, slɔt, pɔkit, rɛs ɛn ɔda kɔmpleks ficha dɛn frɔm akrilik, polikabɔnɛt, PVC , PETG , ABS ɛn ɔda kɔmpatibl shit matirial dɛn.

Laser Kɔt ɛn Engravin

Laser prɔsesin na yusful mɔ fɔ kɔmpitabl akrilik aplikeshɔn dɛn lɛk sayn, displei kɔmpɔnɛnt, dɛkɔretiv panɛl, lɛta, logo ɛn grafik dɛn we dɛn rayt.

Laser kompitibiliti fɔ ɔltɛm kɔnfɔm bay di kayn matirial. Wan prɔses we fayn fɔ akrilik nɔ kin fayn fɔ ɛvri tɛmplastik ɔtomɛtik wan.

Day Kɔt we dɛn de kɔt

Tin sheet ɛn film dɛn kin day-kɔt insay winda, insɛt, gasket, kad layers ɛn ɔda ay-volyum kɔmpɔnɛnt dɛn we di matirial tik ɛn tul dɛn mach kɔrɛkt wan.

Fɔ polish

Edj polishing na patikyula valyu fɔ transparent akrilik kɔmpɔnɛnt dɛn usay edj dɛn we de ɛksplɔz de fɔm pat pan di finish vijual apinans.

Bɛnd ɛn Tɛmofɔmin

Suitabl PET , PETG , PVC , akrilik, ABS ɛn PC gred dɛn kin fɔm ɔ bɛn akɔdin to matirial-spɛsifi k prɔsesin kɔndishɔn dɛn. Fɔm paramita dɛn fɔ validet pan di gred ɛn tik we dɛn dɔn pik.

Print pan Plastik Shit ɛn Fim dɛn

Dɛn kin yuz plastic printin fɔ pak, sayn, displei, kad, fɔnicha panɛl ɛn fɔ mek tin dɛn we gɛt brand. Bɔt, di printabiliti dipen pan ɔl tu di polima ɛn di spɛshal sɔfayz tritmɛnt.

UV Fɔ print

UV printin kin gi grafik dɛn we go de te pan kɔmpitabl rigid shit matirial fɔ displei, sayn, dɛkɔretiv panɛl ɛn kɔstɔmayz prodak.

Fɔ Print na Skrin

Skrin printin na tin we dɛn kin yuz fɔ plastic sheet, kad ɛn industrial grafik we di ink sistɛm ɛn di sɔfayz ɛnaji fayn.

Ɔfset ɛn Kad Printin

Kad-grɛd PVC , PETG ɛn PC matirial dɛn kin nid spɛshal printabl sɔfays ɔ kɔtin dipen pan di ɔfset, dijital, inkjɛt ɔ lɛsa pɔsnalayzeshɔn prɔses we dɛn want.

Ɔltɛm Rɔn wan Ink-Adhesion Trial

Di wɔd 'printable plastic' nɔ de gi garanti fɔ kɔmpitishɔn wit ɛvri ink. Di wan dɛn we de bay fɔ tɛst di aktual sheet, ink, printa ɛn di kɔring prɔses bifo dɛn prodyuz bɔku bɔku wan.

Aw fɔ Pik Plastik bay we yu de yuz am

Transparent Ritayl Pakɛj

PET , PETG ɛn rigid transparent PVC ɔl kin tink bɔt dipen pan tɛmfɔmin, klia, kɔst, risaykul strateji, silin ɛn dɛstineshɔn-maket rikwaymɛnt.

Sayn ɛn Displei dɛn

Akrilik, PVC fom bod, PETG ɛn sɔm PC gred dɛn we dɛn dɔn pik kin sav difrɛn displei rikwaymɛnt dɛn. Di matirial sɛlɛkshɔn dipen pan transparency, stiffness, impak pefɔmɛns, surface appearance ɛn indoor/outdoor kondishɔn.

Sefty ɛn Protɛktiv Panɛl dɛn

Bɔku tɛm dɛn kin tink bɔt polikabɔnɛt we di impak pefɔmɛns na di men tin we dɛn nid, bɔt dɛn fɔ pik di aktual tik ɛn sef pefɔmɛns agens di prɔjek standad we dɛn kin yuz.

Fɛnichɔ ɛn Dɛkɔretiv Sɔfays

PETG , PET , PP ɛn akrilik kin yuz fɔ dɛkɔretiv fɔnicha sɔfays dipen pan glos, mat finish, skrach pefɔmɛns, lamineshɔn sistɛm, sabstret ɛn intɛriɔ dizayn rikwaymɛnt.

Smart card Fɔ mek tin dɛn

PVC , PETG ɛn PC kad matirial dɛn fɔ pik akɔdin to di kad layf tɛm, printin, lamineshɔn tɛmpracha, RFID inlay kɔnstrɔkshɔn, pɔsnalayzeshɔn ɛn sikyɔriti rikwaymɛnt dɛn.

Indastrial Ikwipmɛnt Pat dɛn

ABS , PC , PVC , PP ɛn ɔda polima dɛn kin sav industrial aplikeshɔn, bɔt tɛmpracha, kemikal ɛksplɔshɔn, impak lod, dimɛnshɔnal tolɛreshɔn ɛn rigyuletɔri rikwaymɛnt dɛn fɔ ɛvaluet bifo dɛn spɛsifa di matirial.

Plastik Matirial Sɛlɛkshɔn bay Manufakchurin Prɔses

Kwaliti Kɔntrol fɔ Plastik Shit ɛn Fim Sapɔt

Kwaliti kɔntrol fɔ bi bay di prɔpati dɛn we de afɛkt di kɔstɔma in aktual kɔnvɛnshɔn prɔses ɛn di prodak we dɔn dɔn pas fɔ jɔs inspɛkt am wit yay.

• Tiknes: nominal gej ɛn tolɛreshɔn.

• Shit dimɛnshɔn: wit, lɔng ɛn skwea.

• Rol dimɛnshɔn: wit, kɔr, rol OD ɛn wayndin.

• Kɔlɔ: batch kɔnsistɛns ɛn aprɔv rɛfrɛns.

• Transparency: visual klia, haz ɛn layt transmishɔn we i impɔtant.

• Surface: skrat, kontamineshɔn, blak spat, bɔbul ɛn ɔda tin dɛn we nɔ fayn.

• Flatness: impɔtant mɔ fɔ print ɛn mashin.

• Surface treatment: dyne ɔ adhesion rikwaymɛnt fɔ print ɛn kɔt.

• Tεmכfכm: fכm stεbiliti, wayt, krak εn tik distribyushכn.

• Mashin: edj kwaliti, chipin ɛn dimɛnshɔnal akkuracy.

• Printin: adheshon, curing ɛn grafik apinans.

• Lamination: bond strכng, bכbul, wכp εn delaminεshכn.

• Protektiv film: masking adhesion ɛn klin rimobul usay nid de.

Di Kɔmplians Rikwaymɛnt dɛn fɔ Spɛsifik bay Aplikeshɔn

di polimכr nem nכmכ nכ de establish rεgεdyushכn kכmplians. PET , PVC , PC , PETG , akrilik, PP ɛn ABS de insay bɔku fɔmyulashɔn dɛn, ɛn di dɔkyumentri kin difrɛn bay gred.

If di prodak we dɔn nid fɔ gɛt it-kɔntakt, mɛdikal, famasitik, ilɛktrik, flame-retardant, RoHS , REACH ɔ ɔda patikyula tin we dɛn nid, di wan dɛn we de bay fɔ gi di standad we dɛn de yuz ɛn di say we dɛn de go makɛt we dɛn de kot.

Dokumɛnt fɔ kɔnfɔm ɔltɛm fɔ di ɛksaktɔ matirial gred we dɛn gi pas fɔ tek am frɔm di jenɛral plastic famili.

Sastaynabiliti Dipen pan di Kɔmplit Prodak Dizayn

Sastaynabiliti klem fɔ tink bɔt di kɔmplit finish prodak pas fɔ jɔs tink bɔt di rɛsin nem. Matirial wet, risaykul kɔntinyu, nɔmba fɔ di polima layers, kɔtin, adeziv, printin, prodak layf ɛn lokal risaykul infrastukchɔ ɔl kin inflɔws di envayrɔmɛnt prɔfayl.

Fɔ prɔjek dɛn we gɛt sastaynabiliti tarɛkt, di wan dɛn we de bay fɔ difayn if di prayoritɛd na risaykul kɔntinyu, mono-matirial dizayn, matirial ridɔkshɔn, lɔng savis layf, risaykul ɔ ɔda ɔbjɛktiv we dɛn kin mɛzhɔ.

Us Infɔmeshɔn Di wan dɛn we de bay fɔ put insay wan Plastik Matirial RFQ?

Wan ditayl RFQ de ɛp di spɔlayt fɔ rɛkɔmɛnd wan fayn matirial fast ɛn i de ridyus di risk fɔ gɛt sampul we nɔ go ebul fɔ rɔn na di bayer in prodakshɔn layn.

• Matirial: PVC , PET , PETG , PC , akrilik, ABS , PP ɔ rɛfrɛns we dɔn de.

• Aplikeshɔn: pak, sayn, kad, displei, fɔnicha, industrial kɔmpɔnɛnt ɔ ɔda yuz.

• Tik: nominal tik ɛn tolɛreshɔn.

• Dimenshɔn: sheet saiz, finish pat saiz ɔ rol wit.

• Kwantiti: sampul, trayal ɔda ɛn projɛkt kɔmɛshɔnal volyum.

• Kɔlɔ: klia, wayt, blak, standad kɔlɔ ɔ kɔstɔm rɛfrɛns.

• Surface: glossy, mat, frosted, tekstur ɔ kɔt.

• Optik prɔpati dɛm: klia, haz ɔ layt-transmishɔn target if impɔtant.

• Mɛkanikal rikwaymɛnt dɛn: rigiditi, fleksibiliti ɔ impak pefɔmɛns.

• Tɛmpratura: ɔpreshɔn ɛn prɔsesin tɛmpracha.

• Kεmikכl εkspכzכn: no di kεmikכl dεm, kכnsantreshכn εn tεmprachכ usay i rili impɔtant.

• Prɔsesin: thermoforming, vaykum fɔm, CNC , day kɔt, layz kɔt, printin, bɛnd ɔ laminɛshɔn.

• Drawing: gi DXF, DWG, STEP, PDF ɔ dimɛnshɔnal drɔin fɔ di pat dɛn we dɔn dɔn.

• Tolerance: spɛsifa dimɛnshɔnal tolerances instead fɔ asum standad kɔt akkuracy.

• Printin: di we aw dɛn de print, ink ɛn sɔfa-tritmɛnt we dɛn nid.

• Yuz na do: spɛsifa UV ɛksplɔshɔn ɛn ɛkspɛkt savis layf.

• Kɔmplians: gi di standad we dɛn nid ɛn di kɔntri usay dɛn de go.

• Pakɛj: difayn shit, rol, palet ɔ wan wan protɛkt finish-pat rikwaymɛnt dɛn.

Wetin Mek B2B Baya Dɛn De Wok Wit Wallis fɔ Plastik Matirial

Bɔku Matirial dɛn Frɔm Wan Spɔla

Wallis de saplae PVC , PET , PETG , PC , akrilik, ABS , PP ɛn matirial dɛn we gɛt fɔ du wit kad, we de alaw pipul dɛn we de bay fɔ kɔmpia bɔku matirial famili dɛn rawnd di sem aplikeshɔn.

Shit, Film ɛn Card material Sapɔt

Di pɔtfolio kɔba rigid shit, fim, kad kɔr shit, Overlay film s, RFID prelam inlay ɛn finish plastic prodak fɔ difrɛn manufakchurin wokflɔ.

Dimenshɔn dɛn we dɛn kin kɔstɔm

Di wan dɛn we de bay kin tɔk bɔt di tik, waid, shit saiz ɛn di dimɛnshɔn dɛn we dɛn dɔn dɔn-pat akɔdin to di ikwipmɛnt dɛn we de dɔŋ ɛn di drɔin dɛn we dɛn mek fɔ di prɔdak.

Kastom Fabrikeshɔn

CNC mashin, day kɔt, kɔmpitabl lɛsa prɔsesin, printin, polish ɛn ɔda kɔnvɔyt savis kin ridyus di nɔmba fɔ sɛkɔndari saplay dɛn we dɛn nid fɔ kɔstɔmayz prɔjɛkt dɛn.

Sɔpɔt fɔ Sɛl di Matirial

Fɔ gi Wallis di aktual aplikeshɔn, fabrikeshɔn prɔses, ɔpreshɔn ɛnvayrɔmɛnt ɛn tɛnki rikwaymɛnt dɛn de alaw fɔ evalyu di prɔjek rawnd fɛnshɔn instead ɔf matirial nem nɔmɔ.

Sampul dɛn Bifo Kɔmɛshɔnal Prodakshɔn

Sampul evalueshɔn de ɛp di wan dɛn we de bay fɔ chɛk di kɔlɔ, dimɛnshɔn, klia, printin, thermoforming, mashin, lamination ɔ ɔda prɔsesin pefɔmɛns bifo dɛn apruv volyum prodakshɔn.

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm Bɔt Plastik Shit ɛn Kɔstɔm Fabrikeshɔn

Us kayn plastic sheet dɛn Wallis de gi?

Wallis de saplae matirial famili dɛn we inklud PVC , PET , PETG , polycarbonate, acrylic, ABS , PP , PVC fom bod ɛn plastic kad matirial, togɛda wit rilat film ɛn kɔstɔmayz prodak.

Us plastic we bɛtɛ fɔ mek klia thermoforming pak?

PET , PETG ɛn rigid transparent PVC ɔl kin yuz fɔ sɔm transparent tɛmfɔmin aplikeshɔn dɛn we dɛn dɔn pik. Di kɔrɛkt chukchuk dipen pan fɔm dip, mashin, stiffness, klia, siling, kɔst, kɔmplians ɛn risaykul rikwaymɛnt.

Wetin na di difrɛns bitwin PET ɛn PETG sheet?

Dɛn tu na polyɛsta-bɛs matirial, bɔt PETG na glycol modifyed ɛn i de gi difrɛn fɔm, tafnɛs ɛn fabrikeshɔn kwaliti dɛn. Di kɔrɛkt matirial dipen pan di prodak we dɔn dɔn ɛn di kɔndishɔn we dɛn de prosɛs am.

Uswan bɛtɛ, akrilik ɔ polikabɔnɛt?

Nɔn pan dɛn tu tin ya nɔ bɛtɛ ɔlsay na di wɔl. Bɔku tɛm dɛn kin pik akrilik fɔ optik klia, polish apinans, sayn ɛn dɛkɔretiv aplikeshɔn, we dɛn kin lɛk polikabɔnɛt bɔku tɛm usay dɛn nid fɔ gɛt ay impak ɛn ɔt pefɔmɛns.

Us plastic bɛtɛ fɔ sayn?

Akrilik na pɔpul fɔ klia, kɔlɔ, layt ɛn prɛmiɔm sayn, we PVC fom bod na bɔku say dɛn de yuz fɔ layt wet print sayn. PETG εn כda plastic dεm dεn kin kכnsidrε bak akɔdin to di impak εn fכbrikεshכn rikwaymεnt dεm.

Us plastic bɛtɛ fɔ mashin gad dɛn?

Dɛn kin tink bɔt polikabɔnɛt usay impak rɛsistɛns impɔtant, bɔt dɛn fɔ pik tik ɛn matirial gred akɔdin to di sefty pefɔmɛns we dɛn nid ɛn di standad we dɛn kin yuz.

Wallis kin kɔt plastic sheet dɛn to saiz?

Yu kin tɔk bɔt di kɔstɔm sheet dimɛnshɔn ɛn di kɔmpɔnɛnt dɛn we dɔn dɔn. Gi matirial, tik, dimɛnshɔn, tolɛreshɔn ɛn kwantiti fɔ kot.

Wallis CNC kin mashin plastic pat?

CNC fabrication kin bi diskכs fכ kompitibl plastic mεtirial dεm. Dɛn fɔ gi CAD drɔin, tik, tolɛreshɔn, ol, pɔkit ɛn finish-ɛj rikwaymɛnt.

Yu tink se dɛn kin kɔt ɔl di plastic sheet dɛn wit lɛsa?

Nɔ. Laser kɔmpatibiliti dipen pan di polima ɛn di prɔsesin ikwipmɛnt. Akrilik na laser prosɛs, we ɔda plastic dɛn nid matirial-spɛsifi k ɛvalueshɔn ɛn i kin bɛtɛ fɔ kɔt bay CNC , saw ɔ day kɔt.

Yu tink se dɛn kin UV print plastic sheet dɛn?

Bɔku plastic sheet dɛn kin UV print we di sɔfa, ink ɛn di kɔring sistɛm kɔmpitabl. I fayn fɔ tɛst ink-adhesion bifo dɛn mek am fɔ kɔmɛshɔn.

Wallis kin saplae plastic we de mek thermoforming?

PET , PETG , PVC , ABS ɛn ɔda fayn matirial dɛn kin ebul fɔ evaluate fɔ thermoforming. Gi di tik we dɛn nid, fɔm dip, drɔ ɛn ikwipmɛnt infɔmeshɔn.

Wallis de saplae plastic kad matirial?

Yɛs. Di kɔrɛnt kad-matirial rɛnj inklud PVC , PETG ɛn PC kɔr shit, Overlay film s, RFID prɛlam inlay ɛn rilayt smat-kad matirial dɛn.

Wallis kin kɔstɔmayt tik ɛn sheet saiz?

Customized spesifikeshɔn dɛn kin tɔk bɔt akɔdin to matirial, manufakchurin fisibiliti, ɔda kwantiti ɛn daunstrim prɔsesin rikwaymɛnt.

A kin ɔda plastic kɔmpɔnɛnt dɛn we dɔn dɔn instead ɔf ful sheet?

Yes, dɛn kin ebul fɔ evalyu fayn fayn prɔjek dɛn fɔ kɔt-to-sayz, CNC , day-kat, print, polish ɔ ɔda we fɔ kɔstɔmayz kɔmpɔnɛnt dɛn bays pan di kɔstɔma dɛn drɔin.

Yu tink se ɛvri PET , PVC ɔ PP sheet mit di tin dɛn we dɛn nid fɔ gɛt fɔ kɔntakt it?

Nɔ, fɔ fala di lɔ we pɔsin kin gɛt wit it na di gred ɛn na di makit. Di wan dɛn we de bay fɔ aks fɔ dɔkyumɛnt fɔ di rayt tin ɛn di kɔndishɔn dɛn we dɛn want fɔ kɔntakt di it.

Yu tink se ɔl di plastic sheet dɛn fayn fɔ yuz na do?

n UV Lɔng tɛm ɛkstirian projɛkt dɛn fɔ spɛsifa di savis kɔndishɔn dɛn we dɛn de ɛkspɛkt.

Wallis kin mach wan kɔstɔm plastic kɔlɔ?

Dɛn kin tɔk bɔt di kɔstɔm kɔlɔ dɛn fɔ di fayn matirial dɛn ɛn fɔ di kwantiti dɛn we dɛn kin sɛl. Kɔlɔ-kritikal prɔjek dɛn fɔ gi wan fizik sampul ɔ difayn kɔlɔ rɛfrɛns fɔ ɛvalueshɔn.

A fɔ aks fɔ sampul bifo a prodyuz bɔku bɔku wan?

Yɛs. Dɛn kin rili kɔmɛnt fɔ tek sampul we dɛn de fɔm, print, mashin, laminashɔn, optik apia ɔ ɔda prɔsesin kwaliti dɛn we de afɛkt di prɔdak we dɔn dɔn.

Us infɔmeshɔn dɛn nid fɔ mek dɛn kot fɔ mek plastic?

Gi matirial, tiknɛs, dimɛnshɔn, kwantiti, drɔin, dimɛnshɔnal tolɛreshɔn, kɔlɔ, sɔfayz finish, prɔsesin we, ɔpreshɔn ɛnvayrɔmɛnt ɛn ɛni standad ɔ tɛst we dɛn nid.

Pik Plastik Matirial bay di Aplikeshɔn ɛn Prɔses Rikwaymɛnt

Wan saksesful plastic projɛkt kin stat bay we dɛn de difayn wetin di finish prodak nid fɔ du. Transparency, impak strכng, tεmprachכ rεsistεns, kεmikכl εkspכzכn, printin, tεmכfכm, CNC mashin, laminεshכn εn rεgεdyushכn rikwaymεnt dεm fכ establish bifo yu pik di polimכr.

Bifo dɛn pik PVC , PET , PETG , PC , akrilik, ABS ɔ PP bay di prayz nɔmɔ, pɔshɔnal bayer dɛn fɔ kɔmpia di kɔmplit manufakchurin ɛn savis-layf rikwaymɛnt dɛn fɔ di finish prodak.

Send Wallis yu aplikeshɔn, matirial prɛferɛns, dimɛnshɔn, kwantiti, prɔsesin we, drɔin ɛn tɛnki rikwaymɛnt fɔ tɔk bɔt fayn sheet, fim, kad matirial ɔ kɔstɔm fabricated kɔmpɔnɛnt dɛn.