|
Wallis -PETG Shit we de na di wɔl
Wallis we nem Wallis
| Kɔlɔ: | |
|---|---|
| Tik: | |
| Advantej: | |
| Aplikeshɔn: | |
| Kwantiti: | |
Wallis kɔstɔmayz kɔlɔ finga prɛnt-resistant PETG fɔnicha fim na wan dɛkɔretiv sɔfa matirial we dɛn divɛlɔp fɔ fɔnicha panɛl, kabinɛt domɔt, wodrɔb, intɛriɔ domɔt, wɔl panɛl, ɔfis fɔnicha, ɔtel fɔnicha, rital fiks, ɛn kɔmɛshɔnal intɛriɔ prɔjɛkt. I de jɔyn di kɔlɔ ɛn finish opshɔn dɛn we yu kin kɔstɔmayz wit wan anti-finga prɛnt sɔfays we de ɛp fɔ ridyus di an mak dɛn we pɔsin kin si, ɔyl smudj, ɛn di tin dɛn we yu nid fɔ klin ɔltɛm.
Dɛn mek dis PETG dɛkɔretiv fim fɔ di wan dɛn we de mek fɔnicha, kabinɛt faktri, panɛl laminatɔ, distribyushɔn, ɛn intɛriɔ kɔntrakta, dɛn kin gi dis PETG dɛkɔretiv fim insay kɔstɔmayt kɔlɔ ɛn sɔm sɔfays ifɛkt dɛn we dɛn dɔn pik. Di kɔrɛnt prodak rɛnj sɔpɔt wan tiknes 0.25–0.8 mm , wit fayn kɔlɔ, dimɛnshɔn, finish, kɔtin pefɔmɛns, ɛn prɔsesin rikwaymɛnt dɛn we dɛn kɔnfyus akɔdin to di aprɔv sampul ɛn prɔjek spɛsifikɛshɔn.
| Di Nem fɔ Prodak | Kastomized Kɔlɔ Finga Prɛnt-Resistant PETG Fɛnichɔ Film |
|---|---|
| Tin dɛn | PETG termoplastik dekorativ film |
| Kɔlɔ | Sɔlid kɔlɔ dɛn we dɛn kɔstɔmayt, pɔtn dɛn, ɛn dɛkɔretiv ifɛkt dɛn we dɛn kin kɔnfyus fɔ sampul |
| Tik we i tik | 0,25–0,8 mm, ɛn di ɔda wan dɛn; kɔstɔmayz spesifikeshɔn we de ɔnda prodakshɔn kɔnfɔmeshɔn |
| Surface Finish na di wɔl | Mat, ay glos, ɛn kɔstɔmayt dɛkɔretiv finish |
| Di tin dɛn we de na di wɔl | Opshɔn dɛn we nɔ gɛt finga prɛnt, we nɔ de skrach, we nɔ gɛt stɛyn, ɛn we izi fɔ klin |
| Tipik Sabstret dɛn | Kompatibl furniture bod ɛn panɛl afta adhesive ɛn lamination validation |
| Aplikeshɔn dɛn | Kabinɛt, wodrɔb, domɔt, panɛl dɛn na di wɔl, dɛsk, ɔtel fɔnicha, ɔfis fɔnicha, rital displei, ɛn panɛl dɛn we dɛn kin yuz fɔ dekɔret |
| Kastamayzeshɔn | Kɔlɔ, pɔtn, glos lɛvɛl, sɔfa tritmɛnt, tik, dimɛnshɔn, protɛktiv fim, ɛn pak |
Spɛsifikeshɔn not: Di pefɔmɛns ɛn prodakshɔn paramita dɛn we de difrɛn bay di film strɔkchɔ, kɔtin, kɔlɔ, tiknɛs, sabstret, adeziv, ɛn prɔsesin we. Faynal rikwaymɛnt dɛn fɔ verify yuz wan aprɔv sampul ɛn trial-laminated panɛl bifo mas prodakshɔn.
PETG, ɔ polyethylene terephthalate glycol-modified, na wan tɛmplastik matirial we dɛn kin yuz fɔ dɛkɔret ɛn protɛkt fɔnicha sɔfays. PETG furniture film na laminated pan wan fayn bod ɔ panɛl fɔ mek wan smol finish fes we i de impruv di vishɔnal apinans ɛn ɛp fɔ protɛkt di ɔndalayn sabstret frɔm nɔmal indo yus.
Fɔ mek fɔnicha, dɛn kin mek PETG fim insay sɔlid kɔlɔ, mat ɔ glos sɔfays, wud-inspired dizayn, mabul ifɛkt, ɛn ɔda prɔjek-spɛsifi k finish. Wan tɔp layt we nɔ gɛt finga prɛnt de ɛp fɔ mek i izi fɔ mek di say dɛn we dɛn tɔch bɔku tɛm, mɔ pan dak kɔlɔ ɛn fɔnicha frɔnt dɛn we nɔ gɛt bɔku glos usay yu kin notis di an mak dɛn mɔ.
PETG furniture film na di dekorativ surface layt pas di komplit furniture bod. Faynal panɛl pefɔmɛns dipen pan di PETG gred, sɔfayz kɔtin, adeziv, sabstret kwaliti, ed silin, lamineshɔn paramita, stɔrɔj kɔndishɔn, ɛn instɔleshɔn we. So di wan dɛn we de bay fɔ evalyu di kɔmplit panɛl kɔnstrɔkshɔn instead fɔ asɛs di fim nɔmɔ.
Di men valyu fɔ bay dis prɔdak na di kɔmbaynshɔn fɔ kɔstɔmayz apinans ɛn funkshɔnal sɔfa tritmɛnt. Bifo dɛn gi di fim wan dizayn we dɛn print nɔmɔ, dɛn kin spɛsifa di fim fɔ kɔlɔ, glos, tɔch, finga prɛnt, stɛyn, skrach, ɛn kɔmpitishɔn wit di panɛl-prɔdakshɔn prɔses we dɛn bin want.
Di say we dɛn dɔn trit kin ɛp fɔ mek yu nɔ si di finga prɛnt, ɔyl mak, ɛn smud we kin kam bikɔs yu de ol am ɛvride. Dis kin fayn mɔ fɔ kabinɛt domɔt, wodrɔb frɔnt, dɛsk panɛl, drɔwa, risepshɔn kɔnta, ɛn rital fɔnicha we dɛn kin tɔch bɔku tɛm.
Divɛlɔpmɛnt fɔ kɔlɔ we dɛn kɔstɔmayz de alaw fɔnicha brand ɛn di wan dɛn we de bay di prɔjek fɔ kɔdinɛt kabinɛt frɔnt, wodrɔb, wɔl panɛl, shelf, domɔt, ed matirial, hadwae, flo, ɛn ɔda intɛriɔ finish. I fayn fɔ gri fɔ yuz fizik sampul bikɔs layt, glos lɛvɛl, skrin sɛtin, ɛn sabstret kɔlɔ kin afɛkt di las apinɛns.
Matt PETG furniture film de kriet wan restrained, modna surface wit low lait riflεkshɔn, we wan glossy finish kin gi big vijual dip ɛn wan brayt prɛmiɔm apinans. Di opshɔn we fit dipen pan di pozishɔn we di prɔdak de, di tin dɛn we dɛn de op fɔ klin, di say we dɛn de yuz am, ɛn di tin we dɛn nid fɔ tɔch ɔ we dɛn si am.
Di opshɔn dɛn we nɔ de skrach ɛn we nɔ gɛt stɛyn de ɛp fɔ mek di say dɛn we di fɔnicha nɔ klin we dɛn de prosɛs, transpɔt, instɔl, ɛn yuz am insay os nɔmal wan. Di pefɔmɛns lɛvɛl we dɛn nid fɔ difayn yuz di bayer in tɛst we ɛn akseptans krayteria bikɔs di kɔtin pefɔmɛns kin difrɛn bay di prɔdak gred.
Yu kin was wan smol, nɔ-porous dɛkɔretiv sɔfays wit sɔft klos ɛn wan mild nyutral klin. Fɔ klin izi wan valyu na kichin, ɔfis, ɔtel, rital stɔ, ɛn ɔda intɛriɔ usay fɔnicha fɔ kɔntinyu fɔ luk di sem we we yu de yuz am ɔltɛm.
Dɛn kin mek sɔlid kɔlɔ fɔ di mɔdan fɔnicha kɔlɛkshɔn, prayvet-lɛbul prodak layn, ɔspitul prɔjɛkt, ɔfis sistɛm, ɛn rital intɛriɔ. Di wan dɛn we de bay fɔ gi wan fizik kɔlɔ chip, panɛl we dɛn dɔn gri fɔ, ɔ ɔda stebul rɛfrɛns ɛn difayn di akseptabl kɔlɔ tolɛreshɔn bifo dɛn prodyuz.
PETG film kin sɔpɔt dɛkɔretiv kɔnsɛpt dɛn lɛk wud-inspired patɛns, mabul ifɛkt, mɛtal apinans, ɛn projɛkt-spɛsifi k grafik. Patna skel, ripit, print dairekshɔn, glos, tɛkstɔr, ɛn kɔlɔ alaynɛshɔn fɔ kɔnfyus we dɛn de divɛlɔp sampul, mɔ fɔ big domɔt ɛn fɔnicha panɛl dɛn we de nia.
Yu kin pik di say we yu de fɔ mek yu gɛt ay-glos, saf mat, ɔ ɔda tin we yu want fɔ si ɛn tɔch. Dɛn fɔ evalyu di glos lɛvɛl togɛda wit di kɔlɔ we dɛn dɔn pik bikɔs di kɔlɔ dɛn we dak, layt we de sho usay fɔ go, ɛn big flat panɛl dɛn kin mek pɔsin si di riflɛkshɔn ɔ di mak dɛn we de na di say we dɛn de.
Dɛn kin tɔk bɔt di protɛktiv fim ɛn ɛkspɔt pak akɔdin to di sɔfayz finish, di we aw dɛn de handle shit ɔ rol, di prodakshɔn ikwipmɛnt, shipmɛnt distans, ɛn di tin dɛn we di kɔstɔma nid fɔ lɛbul di lɛbl. Di layt we de protɛkt fɔ de na in ples di tɛm we dɛn de du di rayt prɔses ɛn dɛn fɔ pul am akɔdin to di instrɔkshɔn dɛn we dɛn gri fɔ.
Kastomayz projɛkt dɛn kin bigin wit wan kɔnfyus rɛfrɛns ɛn sampul-divɛlɔpmɛnt tarɛkt. Di pɔsin we bay fɔ evalyu di sampul ɔnda di layt we i want ɛn kɔmpia di kɔlɔ, glos, tɛkstɔr, pɔtn dairekshɔn, ɛn di panɛl we dɔn dɔn bifo i gri fɔ mek dɛn mek am bɔku bɔku wan.
Di finga prɛnt rɛsistɛns, skrach rɛsistɛns, stɛyn rɛsistɛns, glos, ɛn tɔch na di sɔfayz kɔtin sistɛm de inflɔws. Di wan dɛn we de bay fɔ no di impɔtant wok we dɛn nid fɔ du ɛn di kemikal dɛn we dɛn want fɔ klin so dat dɛn go ebul fɔ evalyu di gred we fit we dɛn de tek di sampul.
Wan trayal we yuz di aktual sabstret, adeziv, ikwipmɛnt, ɛn prodakshɔn sɛtin dɛn de ɛp fɔ chɛk di bonding, flatnɛs, bɔbul, sɔfays apinans, edj kwaliti, ɛn dimɛnshɔnal bihayvya. Dis step impɔtant mɔ fɔ nyu kɔlɔ, kɔtin, bod saplay, adeziv, ɔ lamination layn.
Prodakshɔn inspekshɔn fɔ pe atɛnshɔn pan di spɛsifikɛshɔn we dɛn gri pan, inklud tik, dimɛnshɔn, kɔlɔ kɔnsistɛns, glos, sɔfays klin, kɔtin apinɛns, protɛktiv fim, waynd ɔ shit kɔndishɔn, ɛn pak. Di prɔjɛkt-spɛsifi k tɛst standad dɛn fɔ difayn insay di spɛsifikɛshɔn fɔ bay pas fɔ asum.
PETG film we nɔ gɛt finga prɛnt fayn fɔ di mɔdan kabinɛt frɔnt usay i impɔtant fɔ mek i luk ɛn fɔ mek i klin. Mat surface kin mek wan restrained contemporary look, while glossy kala kin inkrisayz visual dip en layt riflekshɔn.
Big wodrɔb domɔt dɛn nid fɔ gɛt stebul kɔlɔ, kɔntrol glos, klin hanlin, ɛn kɔdinɛt ɛj tritmɛnt. PETG fim we dɛn kɔstɔmayz kin ɛp di wan dɛn we de mek fɔnicha fɔ bil kɔleshiɔn dɛn we mach akɔdin to domɔt, drɔwa, shelf, sayd panɛl, ɛn di tin dɛn we de na di wɔl.
Dɛn kin yuz dɛkɔretiv PETG fim fɔ kɔmpitabl indo domɔt panɛl, ficha wɔl, risepshɔn bakgrɔn, kɔridɔ panɛl, ɛn kɔdinɛt intɛriɔ sistem. Di panɛl strɔkchɔ ɛn di ed siling fɔ pik fɔ di humidity we dɛn de ɛkspɛkt, klin, ɛn instɔleshɔn kɔndishɔn.
Ɔtel dɛn, ɔfis dɛn, rɛstɔrant dɛn, shorum dɛn, ɛn rital stɔ dɛn kin yuz PETG dɛkɔretiv sɔfays fɔ risepshɔn dɛsk, displei kɔnta, shelf, stɔrɔj kabinɛt, wɔl panɛl, wok steshɔn, ɛn sɔm tin dɛn we dɛn dɔn pik fɔ tek tebul. Kɔmɛshɔnal prɔjek dɛn fɔ difayn frɛkuɛns fɔ klin, wear lɛvɛl, faya ɔ sefty rikwaymɛnt, ɛn ɔda lokal spɛsifikɛshɔn dɛn we dɛn de pik matirial.
Di fɔnicha bɔd fɔ flat, klin, dray, ɛn nɔ gɛt ɔyl, dɔst, fayv we nɔ tay, dent, ɛn ɔda tin dɛn we nɔ fayn na di say we dɛn de. di mכsichכ kכntεnt εn di bod stεbiliti fכ kכntrol biכs di irεgulεriti dεm na di sabstεrayt kin stil de fכ si afta laminεshכn.
Adhesive selekshɔn dipen pan di PETG film, sabstret, ikwipmɛnt, prodakshɔn spid, tɛmpracha, prɛshɔn, ɛn fayn savis ɛnvayrɔmɛnt. Di adhesive spɔlayt ɛn laminator fɔ kɔnfɔm kɔmpitibliti ɛn kɔndɔkt bonding tɛst bifo ful prodakshɔn.
Tɛmpratura, prɛshɔn, layn spid, di tɛm we dɛn de de, di kol, ɛn di we aw dɛn de handle fɔ de insay di prɔses winda we dɛn dɔn gri fɔ. Klin rɔla, prɛs sɔfays, tul dɛn fɔ kɔt, ɛn wok tebul dɛn kin ɛp fɔ mek tin dɛn we nɔ trɔp, impreshɔn, ɛn skrach na di fes we dɛn de drɛs.
Stɔr PETG fim na klin, dray indo eria we nɔ gɛt dairekt san, ɔt pasmak, mɔs, dɔst, ɛn shap tin dɛn. Alaw di matirial ɛn sabstret fɔ rich di rayt prɔsesin kɔndishɔn bifo lamination, ɛn fala di instrɔkshɔn dɛn we dɛn gri fɔ stak ɔ rol-hanlin.
Rimov dɔst ɛn finga prɛnt yuz klin, saf maykrofayba klos.
Yuz klin wata ɔ wan mild nyutral ditajɛn fɔ klin ɔltɛm.
Wap wata, ɔyl, it, ink, ɔ kɔsmɛtik stɛyn wantɛm wantɛm.
Nɔ yuz stɛl wul, abrasive paoda, rɔf pad, bled, ɛn shap tul dɛn.
Nɔ yuz strɔng sɔlvɛnt ɔ agresiv kemikal pas dɛn dɔn kɔnfyus kɔmpatibiliti fɔ di kɔtin we yu dɔn pik.
Klin resistans dipen pan di surface coating ɛn kemikal kɔnsɛntreshɔn. Fɔ kɔmɛshɔnal prɔjek ɔ diman fɔ klin rutin, tɛst di klin ɛjɛn we yu want fɔ klin pan say we nɔ de sho ɔ sampul we dɛn dɔn gri fɔ bifo yu yuz am ɔlsay.
PETG, PVC, ɛn akrilik prɔdak dɛn ɔl kin yuz fɔ dɛkɔretiv fɔnicha sɔfays, bɔt dɛn difrɛn pan strɔkchɔ, prɔsesin bihayvya, apinɛns, ɛn pefɔmɛns gred dɛn we de. Di kɔrɛkt matirial fɔ pik akɔdin to di sabstret, ikwipmɛnt, fɔm rikwaymɛnt, target finish, tɛst standad, badjɛt, ɛn ɛnd-yuz ɛnvayrɔmɛnt.
| Selection Factor | PETG Furniture Film | PVC Dekorativ Film | Akrilik Dekorativ Surface |
|---|---|---|---|
| Di Tipik Apɛndiks | Smɔl mat ɔ ay-glos kɔlɔ dɛn, pɔtn dɛn we dɛn print, ɛn ifɛkt dɛn we dɛn mek fɔ yu | Brayt sɛlɛkshɔn fɔ kɔlɔ dɛn, wud grens dɛn, tɛkstɔr dɛn, ɛn dizayn dɛn fɔ rap | Strɔng glos dip ɔ spɛshal mat sɔfays dipen pan gred |
| Anti-Finga Prɛnt | Available wit wan fayn surface coating | Yu kin gɛt am pan sɔm gred dɛn we dɛn dɔn kɔt | Available pan sɔm matte gred dɛn we dɛn dɔn pik |
| Di we aw dɛn de du di wok | Suitabl fɔ validet panɛl lamination ɛn sɛlɛkɛt fɔm prɔses | Dɛn kin yuz am fɔ flat lamination, rap, ɛn thermoforming dipen pan fɔmyulashɔn | Bɔku tɛm dɛn kin yuz am fɔ flat laminated frɔnt ɛn sɛlɛkɛt postfɔmin aplikeshɔn dɛn |
| Surface Pɔfɔmɛnshɔn | Skrach-, stɛyn-, ɛn izi-klin opshɔn dɛn dipen pan kɔtin ɛn gred | Di pefɔmɛns kin difrɛn bad bad wan bay di fim strɔkchɔ ɛn di kɔtin | Di we aw dɛn kin du am kin difrɛn bay di akrilik strɔkchɔ, had kot, ɛn finish |
| Kastamayzeshɔn | Kastom kɔlɔ, pɔtn, glos lɛvɛl, ɛn sɔfay tritmɛnt | Bɔku bɔku dɛkɔreshɔn, ɛmbos, ɛn wrap opshɔn dɛn | Kastom kɔlɔ ɛn pik finish opshɔn dɛn we de ɔnda di saplayer kapasiti |
| Tin fɔ Tink bɔt fɔ Risaykul | Dipen pan klin matirial separeshɔn ɛn lokal risaykul infrastukchɔ | Dipen pan fɔmyulashɔn, separeshɔn, ɛn lokal risaykul infrastukchɔ | Dipen pan matirial kɔnstrɔkshɔn, separeshɔn, ɛn lokal risaykul infrastukchɔ |
| Tipik Projɛkt Fit | Di mɔdan kabinɛt dɛn, wodrɔb dɛn, panɛl dɛn, ɔfis fɔnicha dɛn, ɛn kɔmɛshɔnal intɛriɔ dɛn | Doa, profayl, kabinɛt, panɛl, ɛn brayt dɛkɔreshɔn aplikeshɔn dɛn we dɛn rap | Prɛmiɔm kabinɛt frɔnt, panɛl dɛn we de shayn, ɛn spɛshal dɛkɔretiv sɔfays dɛn |
Kɔmpiashɔn not: Di tebul prɛzɛnt jenɛral sɛlɛkshɔn kɔnsidareshɔn pas garanti pefɔmɛns. Ɔltɛm kɔmpia di spɔlayt data shit, fizik sɛmpul, tɛst rizɔlt, prɔsesin rikwaymɛnt, ɛn totɛl panɛl kɔnstrɔkshɔn fɔ di spɛshal prɔjek.
Kastomayz apinans: kɔlɔ, pɔtn, glos, ɛn dɛkɔretiv ifɛkt divɛlɔpmɛnt fɔ fɔnicha kɔllɛkshɔn ɛn prɔjek spɛsifikɛshɔn dɛn.
Fɔnshɔnal sɔfa opshɔn dɛn: anti-finga prɛnt, skrach-rɛsistant, stɛyn-rɛsistɛns, ɛn izi-klin gred dɛn akɔdin to di kɔnfyus rikwaymɛnt.
B2B projɛkt sɔpɔt: kɔmyunikeshɔn wit fɔnicha faktri, panɛl laminatɔ, kabinɛt manifakta, distribyushɔn, ɛn intɛriɔ kɔntrakta.
Sampul verifyeshɔn: fizik sampul ɛn trayal-laminɛshɔn ɛvalueshɔn bifo bɔlk prodakshɔn.
OEM saplae: kɔstɔmayz dimɛnshɔn, protɛktiv film, lɛbl, ɛn pak kin tɔk bɔt akɔdin to di ɔda.
Fɔ gɛt kɔrɛkt kot ɛn sampul rɛkɛmɔndeshɔn, duya gi di tik, waid, lɔng ɔ rol fɔmat we yu nid, kɔlɔ rɛfrɛns, pɔtn, sɔfayz finish, anti-finga prɛnt rikwaymɛnt, skrach-rɛsistɛns rikwaymɛnt, sabstret tayp, lamineshɔn we, aplikeshɔn, ɛstimat kwantiti, di kɔntri we yu de go, pak we yu nid, ɛn ɛni tɛst ɔ kɔmplians dɔkyumɛnt we yu nid.
Fɔ di kɔlɔ dɛn we yu want, sɛn wan fizik sampul ɛnitɛm we i pɔsibul. Fɔ nyu panɛl kɔnstrɔkshɔn, gi infɔmeshɔn bak bɔt di bɔd, adeziv, ikwipmɛnt, ɛn opareshɔn kɔndishɔn so dat dɛn go tɔk bɔt di sampul ɛn trayal prɔses mɔ efyushɔn.
Na PETG dɛkɔretiv sɔfays fim wit trit ɔp layt we de ɛp fɔ ridyus finga prɛnt we pɔsin kin si, ɔyl mak, ɛn smudj. Dɛn lamin am pan kɔmpatib fɔnicha bod fɔ kabinɛt, wodrɔb, domɔt, wɔl panɛl, ɔfis fɔnicha, ɛn kɔmɛshɔnal intɛriɔ.
Dɛn mek di kɔtin we de ɔp fɔ mek di mak dɛn we de na di an nɔ go si bɛtɛ ɛn i izi fɔ pul. Aktual pefɔmans dipen pan di kɔtin gred, kɔlɔ, glos lɛvɛl, layt, we fɔ klin, ɛn tɛst standad, so dɛn fɔ evalyu di sɛmpul dɛn bifo dɛn ɔda.
Di kɔrɛnt prodakt spɛsifikɛshɔn sɔpɔt wan tiknɛs rɛnj we na 0.25–0.8 mm, wit kɔstɔmayz rikwaymɛnt dɛn we de ɔnda kɔnfɔmeshɔn. Di tik we fit dipen pan di sabstret, lamination ikwipmɛnt, panɛl dizayn, surface finish, ɛn fayn aplikeshɔn.
Yɛs. Wi kin tɔk bɔt sɔlid kɔlɔ dɛn we dɛn mek fɔ yusɛf, dizayn dɛn we dɛn mek wit wud, mabul ifɛkt dɛn, mɛtal we dɛn mek, ɛn ɔda tin dɛn we dɛn kin yuz fɔ dekɔret. Faynal fisibiliti, kala tolɛreshɔn, patɛn ripit, kwantiti, ɛn prodakshɔn kɔndishɔn dɛn fɔ kɔnfɔm tru sampling.
Yɛs. Wi kin tɔk bɔt mat, ay-glos, ɛn kɔstɔmayt finish opshɔn dɛn. Di wan dɛn we de bay fɔ kɔnfɔm glos lɛvɛl, tɔch, kɔlɔ apin, finga prɛnt rɛsistɛns, skrach rɛsistɛns, ɛn klin rikwaymɛnt dɛn bay we dɛn yuz sampul we dɛn dɔn gri fɔ.
PETG dɛkɔretiv film kin yuz wit kɔmpitabl fɔnicha bod, inklud fayn MDF-based panɛl kɔnstrɔkshɔn, afta di adeziv, sabstret pripiamɛnt, prɛshɔn, tɛmpracha, layn spid, kol, ɛn bonding pefɔmɛns dɔn validet.
Yu kin yuz am fɔ indo kichin kabinɛt ɛn sɔm batrum fɔnicha dɛn we dɛn dɔn lamin di kɔmplit panɛl fayn fayn wan, sidɔm na di ed, instɔl am, ɛn mentenɛns am. Dɛn fɔ evalyu di wata we de na di wata fɔ lɔng tɛm, di stim, ɔt, di kɔmpitishɔn fɔ adhesive, ɛn di lokal prɔjek we dɛn nid bifo dɛn yuz am.
Di opshɔn dɛn we nɔ de skrach de, bɔt di lɛvɛl dɛn we nɔ de skrach kin difrɛn bay di we aw dɛn kɔt am ɛn di we aw dɛn de tɛst am. Di wan dɛn we de bay fɔ spɛsifa di tɛst standad we dɛn nid, di kɔndishɔn fɔ yuz, ɛn di akseptans lɛvɛl instead fɔ abop pan wan jenɛral diskripshɔn we nɔ de skrach nɔmɔ.
Yuz sɔft maykrofayba klos wit klin wata ɔ mild nyutral ditajɛn. Nɔ yuz abrasive pad, paoda, bled, ɛn sɔlvɛnt dɛn we dɛn nɔ gri fɔ yuz. Test kɔmɛshɔnal klin kemikal dɛn pan wan sampul bifo yu yuz dɛn pan fɔnicha we dɔn dɔn.
PETG na tɛmplastik matirial, bɔt prɛktikal risaykul dipen pan klin matirial separeshɔn, kɔtin, adeziv, di sabstret, kɔlɛkshɔn sistɛm, ɛn lokal risaykul infrastukchɔ. Di risaykulbiliti fɔ wan kɔmplit laminated fɔnicha panɛl fɔ asɛs sɛpret frɔm di fim sɛf.
Yɛs. I fayn fɔ yuz fizik sampul fɔ chɛk di kɔlɔ, glos, tɔch, finga prɛnt rɛsistɛns, skrach rɛsistɛns, adhesive kɔmpatibiliti, ɛn finish-panɛl apinɛns. Trayal lamination fɔ dɔn bifo mas prodakshɔn fɔ nyu spɛsifikɛshɔn dɛn.
Minimum ɔda kwantiti dipen pan if di kɔlɔ na standad ɔ kɔstɔmayt, ɛn bak di tik, dimɛnshɔn, kɔtin, pɔtn, ɛn pak we dɛn nid. Kontakt Wallis wit di komplit spesifikeshɔn fɔ kɔnfɔmeshɔn.
Gi di tik, waid, lɔng ɔ rol fɔmat, kɔlɔ ɔ pɔtn rɛfrɛns, finish, sɔfa-pɔfɔmɛnshɔn rikwaymɛnt, sabstret, prɔsesin we, aplikeshɔn, kwantiti, dɛstineshɔn, pak, ɛn dɔkyumɛnt dɛn we dɛn nid. Kɔmplit infɔmeshɔn de ɛp fɔ ridyus di tɛm fɔ sampul ɛn i de mek di kot kɔrɛkt.
