More Language

Ɔkannifo Ahorow Ahorow Awie Kaad Supplier

                                    Shanghai Wallis Technology Co., Ltd. gyina adwuma no anim sɛ ɔdefo a ɔda nsow a ɔde nkrataa ahorow pii a wɔawie.Efi adansedi nkrataa so kosi nkrataa titiriw so no, yɛde hoahoa yɛn ho sɛ yɛde ɔsom a ɛkorɔn ne ɔsom a ɛkorɔn ma yɛn adetɔfo a wɔsom bo no. Hwehwɛ yɛn afɔrebɔ ahorow mu na nya nsonsonoe a ɛwɔ Wallis mu no mu osuahu.

Wallis--Ɔkannifoɔ a wɔyɛ Finished Card

 Wɔn a Wɔtɔn Kaad a Wɔawie no

Yɛne yɛn bɛyɛ adwuma abom no kyerɛ sɛ wubenya nneɛma a wɔde ma no ano aduru a wotumi de ho to so na etu mpɔn, na woahwɛ ahu sɛ wo nsa bɛka wo nneɛma a woakra no ntɛm ara na ɛwɔ tebea a ɛho tew mu. Yɛn kuw a wɔatu wɔn ho ama no asi wɔn bo sɛ wɔde adetɔfo som ne mmoa soronko bɛma wɔ wholesale nhyehyɛe no nyinaa mu.

 Ma Finished Card Manufacturer & Wɔn a Wɔde Kaad a Wɔawie no Ma

Sɛ́ ebia wuhia adansedi nkrataa, asɔremma nkrataa, akyɛde nkrataa, nokwaredi nkrataa, anaa krataa foforo biara a wɔawie no, yɛwɔ nimdeɛ ne tumi a yɛde bedi w’ahiade ahorow ho dwuma. Yɛn adwinnan nhyehyɛe no di gyinapɛn ahorow a emu yɛ den a ɛfa sɛnea nneɛma te no so de hwɛ hu sɛ kaad biara bedi nea ɛkorɔn sen biara a ɛtra hɔ kyɛ, ahobammɔ, ne afɛfɛde ho dwuma.

 Wɔ Finished Card Distributer ho

Esiane sɛ yɛyɛ nnwumakuw a wɔyɛ kaad nneɛma a wɔde nneɛma a ɛho hia sen biara no mu biako nti, yɛde nneɛma a eye sen biara ma a ɛho ka sua koraa. Eyi ma yɛne wo yɛ adwuma de hwɛ hu sɛ wubenya nso atrɛw nneɛma bo kɛse mu ama w’atɔfo.

Finished Card ahorow ahorow

Eyinom yɛ nkrataa ahorow a wɔawie a ɛwɔ hɔ no ho nhwɛso kakraa bi pɛ. Ɔkwan biara de nneɛma soronko ne mfaso horow a ɛne ahwehwɛde ahorow ne nea wɔpɛ ma.
 

Krataa kaad: Krataa kaad a emu yɛ hare na ɛho ka sua, na wɔtaa de di dwuma de yɛ nneɛma a ɛnyɛ den te sɛ adwuma ho nkrataa, nhyiam tekiti, anaa asɔremma kaad a wɔtow gu.

 

PVC kaad: PVC (Polyvinyl Chloride) kaad yɛ nea ɛyɛ den, nsu ntumi nkɔ mu, na eye ma bere tenten a wɔde di dwuma. Wɔtaa de yɛ ID card, access card, credit card, ne loyalty card.

 

PET kaad: PET (Polyethylene Terephthalate) kaad te sɛ PVC kaad nanso ɛnyɛ nea ɛmma nneɛma a atwa yɛn ho ahyia na ɛko tia kɛse sɛ ɛbɛsɛe. Wɔfata ma dwumadie ahodoɔ te sɛ loyalty cards, access cards, ne key cards.


Transparent frosted cards: Saa cards yi wɔ transparent frosted finish, na ɛma ɛyɛ fɛ na ɛyɛ nnɛyi de. Wɔtaa de yɛ asɔremma nkrataa a ɛyɛ fɛ, akyɛde nkrataa, anaa nsɛm a wɔde hyɛ nkurɔfo nkuran.

 

Die-cut cards: Wɔyɛ die-cut cards sɛnea ɛbɛyɛ a ɛwɔ nsusuwii anaa adwini soronko, na ɛma ɛyɛ anigye na ɛma ɛda nsow. Wobetumi de adi dwuma wɔ nhyiam titiriw ahorow, nsɛm a wɔde hyɛ nkurɔfo nkuran, anaasɛ wɔde bɛhyɛ wɔn din.

 

NFC kaad: NFC (Near Field Communication) kaad no kura NFC chips a wɔde ahyɛ mu, a ɛma wɔn kwan ma wɔne NFC -enabled devices di nkitaho. Wɔtaa de di dwuma de tua sika a obiara nni nkitaho, akwan a wɔfa so kɔ hɔ, ne aguadi ɔsatu ahorow a wɔde di nkitaho.

 

Wallis ho asɛm:Wo Finished Card Supplier ne Manufacturer

Wubetumi Akɔ Wallis adwumayɛbea a ɛwɔ China, Top Brand Kaad nneɛma Supplier.
Shanghai Wallis Plastic Kuw a ɛwɔ 7 Afifide ne nnwinnade a ɛkɔ anim a wɔde bɛma wo kaad nneɛma a ɛkorɔn na ɛyɛ akansi. 
 
Yɛnam mfiri 3 a ɛkɔ anim a wɔde kata nneɛma so so no, yɛma kaad nneɛma a wɔyɛ no so kɔ soro foforo, a nea ɛka ho ne Coated overlay film ,Inkjet Printable,Digital Printable PVC , PETG , PC Krataa, Efi nneɛma a wɔyɛ no yiye so kosi su a ɛso bi nni so no, yɛn bo a yɛasi sɛ yɛbɛyɛ yiye no da adi wɔ yɛn nhyehyɛe no fã biara mu. 
 
Kɔka yɛn ho ma yɛnhwehwɛ mfaso horow a ɛma yɛn kaad nneɛma da nsow, de benchmark foforo si hɔ wɔ adwuma no mu.Yɛda wo ase sɛ wubu yɛn sɛ wo hokafo a wogye wo di wɔ plastic card base manufacturing mu

Kaad a Wɔawie Ahorow Nyinaa

  • <h3 style='text-align: center;'><strong><span style='font-size:20px;'>Dade Kaad a Ɛwɔ Kɔla Ahorow</span></strong></h3>
  • <h3 style='text-align: center;'><span style='font-size:20px;'><strong>Embossed Kaad a Wɔde Nkyerɛwee</strong></span></h3>
  • Ahobammɔ Kaad
  • <h3 style='text-align: center;'><strong><span style='font-size:20px;'>Frosted Kaad a Ɛda Hɔ</span></strong></h3>
  • Hot stamping Kaad a wɔde kyerɛw nneɛma
  • Kɔla a Wɔde tintim Kaad
Sɛ́ adwumayɛbea a ɛyɛ adwuma titiriw wɔ kaad a wɔawie a wɔyɛ mu no, yɛde mfaso ahorow pii ma:

Nneɛma a wɔyɛ no sɛnea wɔpɛ: Yɛwɔ tumi a yɛde bɛyɛ kaad ahorow no sɛnea yɛn afɛfo ahwehwɛde pɔtee te, a ne kɛse, ne nsusuwii, nneɛma a wɔde yɛ adwuma, nhoma tintim, ne ahobammɔ ho nneɛma ka ho. Saa nsakrae yi ma yetumi di ahiade ahorow ne nea wɔpɛ ho dwuma, na yɛhwɛ hu sɛ yɛn afɛfo benya nkrataa a wɔayɛ ama wɔn nsɛm pɔtee.

Nneɛma Pa a Wɔhwɛ So: Yɛhwɛ nneɛma a ɛyɛ den so wɔ nneɛma a wɔyɛ no nyinaa mu de hwɛ hu sɛ kaad biara bedi gyinapɛn a ɛkorɔn sen biara a ɛfa sɛnea ɛyɛ papa, ɛyɛ den, ne nea ɛkɔ so daa ho. Yɛn mfiridwumayɛfo a wɔn ho akokwaw ne nnwinnade a ɛwɔ hɔ nnɛ no ma yetumi yɛ nkrataa a ɛyɛ pɛpɛɛpɛ na ɛyɛ pɛpɛɛpɛ, na ɛtew sintɔ ahorow so na ɛma adetɔfo ani gye.

Efficiency and Scalability: Yɛn nneɛma a yɛyɛ a ɛyɛ mmerɛw ne adwumayɛ nhyehyɛe a etu mpɔn no ma yetumi yɛ kaad ahorow pii ntɛmntɛm na ɛho ka sua. Sɛ́ ebia yɛn afɛfo hia batch ketewaa anaasɛ ade kɛse a wɔkra no, yɛwɔ tumi ne scalability a yɛde bedi wɔn ahwehwɛde ahorow ho dwuma wɔ bere a ɛyɛ den mu.

Nneɛma Foforo ne Mfiridwuma: Yɛkɔ so hu nkɔso a aba foforo wɔ mfiridwuma ne akwan a wɔfa so yɛ kaad mu, na ɛma yetumi de nneɛma foforo ne nkɔso ahorow ka yɛn nneɛma ho. Efi akwan a ɛkɔ akyiri a wɔfa so tintim nhoma so kosi ahobammɔ ho nhyehyɛe a ɛyɛ nwonwa so no, yɛkɔ so bɔ mmɔden sɛ yɛbɛma yɛn kaad ahorow no ayɛ adwuma na ayɛ nea ɛyɛ anigye kɛse.

Ɛka a Wɔbɔ: Ɛdenam yɛn nneɛma a yɛyɛ no yiye na yenya nneɛma a ɛkorɔn wɔ bo a ɛyɛ den so no, yetumi de ano aduru a ɛho ka sua ma yɛn afɛfo a yɛrensɛe nea ɛyɛ papa. Yɛn bo nhyehyɛe a ɛda adi pefee ne nneɛma dodow a wɔtew so no ma yɛn nneɛma no bo yɛ den bio, na ɛma yɛn afɛfo tumi nya mfaso kɛse wɔ sika a wɔde asie no mu.

Adetɔfoɔ Mmoa: Yɛde adetɔfoɔ akomatɔyam di kan na yɛde asi yɛn ani so sɛ yɛde mmoa soronko bɛma wɔ adeyɛ no fã biara mu. Yɛn adwumayɛfo kuw a wɔatu wɔn ho ama no wɔ hɔ ntɛm sɛ wobedi nsɛmmisa biara ho dwuma, de mfiridwuma ho mmoa ama, na wɔahwɛ ahu sɛ osuahu a ɛkɔ so yiye na ɔhaw biara nni ho ama yɛn afɛfo.
 

Dade Kaad a Wɔde Di Dwuma: 

 
  • Dade Kaad: Wɔde dade a ɛyɛ den te sɛ dade a ɛnyɛ den, aluminium, anaa kɔbere na ɛyɛ dade kaad. Wɔda nkate a ɛyɛ fɛ na ɛyɛ fɛ adi, na ɛma wɔyɛ nea eye ma asɔremma nkrataa a ɛyɛ soronko, VIP kaad, anaa nkae nkrataa. Wobetumi de nneɛma ahorow awie dade nkrataa no sɛnea wɔpɛ, a nea ɛka ho ne brush, polished, anaa matte.
 

Nneɛma a Ɛyɛ Afɛfɛde:

Dade kaad ma ɛyɛ fɛ na ɛyɛ fɛ, na ɛma ɛda nsow wɔ plastic kaad a wɔtaa de di dwuma no ho. Dade a wɔde awie no de nneɛma a ɛyɛ nwonwa ne fɛ ka ho, na ɛma dade nkrataa yɛ nea eye ma asɔremma a wɔyɛ adwumaden, akuw a wɔyɛ soronko, ne nneɛma a ɛyɛ fɛ.
 

Nneɛma a Wɔde Yɛ Nneɛma a Ɛda Nsow: 

Dade nkrataa de adwini soronko a wobetumi apaw a ɛnyɛ nea wobetumi de ayɛ nneɛma a wɔde di dwuma wɔ amanne kwan so no ma. Wobetumi de laser engraving, embossing, etching, anaa cut-out designs a ɛyɛ nwonwa ayɛ wɔn sɛnea wɔpɛ, na ama wɔanya mfonini ahorow a ɛyɛ nwonwa ne hokwan ahorow a wɔde bɛhyɛ branding.
 

Kɔla a Wɔde tintim Kaad:


Saa nkrataa yi wɔ tintim a ɛyɛ hyew na ɛyɛ kɔla ahorow nyinaa, na ɛma wotumi de mfonini ahorow, ahyɛnsode ahorow, ne mfonini ahorow a ɛyɛ nwonwa kyerɛ pefee. Wɔtaa de yɛ ID nkrataa, asɔremma nkrataa, nokwaredi nkrataa, ne nsɛm a wɔde hyɛ nkurɔfo nkuran.
 
 

Nkyerɛwde Kaad a Wɔakyerɛw So:

 
Nkyerɛwee a wɔakyerɛw so no de nkyerɛwee a ɛkɔ soro ka kaad no afã horow bi te sɛ nsɛm, ahyɛnsode ahorow, anaa mfonini ahorow ho. Saa tumi a wɔde ka ade yi ma sɛnea kaad no yɛ fɛ yiye na ɛma ɛda nsow. Wɔtaa de saa nkrataa yi yɛ asɔremma kaad a ɛyɛ fɛ, credit card, ne akyɛde kaad.
 
 
 

Ahobammɔ Kaad a Wɔde Di Dwuma

 
Wɔayɛ ahobammɔ nkrataa a ɛwɔ nneɛma bi a ɛbɛma wɔatumi asiw atoro ne nea wɔmma ho kwan. Saa nneɛma yi betumi ayɛ holographic Overlay film s, UV tintim, microtext, anaa data a wɔabɔ no kokoam. Security card ho hia ma application te sɛ access control, aban ID, ne sikasɛm kaad.
 
 

Akyɛde Kaad a Wɔde Tua Ka:


Akyɛde kaad a wɔde tua ka yɛ kaad a wɔadi kan atua ho ka a wobetumi de atɔ ade wɔ aguadifo a wɔde wɔn ho hyɛ mu no nkyɛn, te sɛ credit anaa debit card. Mpɛn pii no, sikakorabea ahorow, sikasɛm asoɛe ahorow, anaa adetɔnfo na wɔde ma na wɔtaa de sikatua nhyehyɛe atitiriw te sɛ Visa, Mastercard, anaa American Express ahyɛ wɔn agyirae. Akyɛde nkrataa a wɔde tua ho ka ma ɛyɛ mmerɛw na ɛyɛ nsakrae, na ɛma wɔn a wogye no tumi paw wɔn ankasa akyɛde anaasɛ wɔtɔ nneɛma wɔ sotɔɔ ahorow a wɔpɛ mu. Wɔtaa de yɛ awodadi, nnapɔnna, nkannyan, ne akatua nhyehyɛe ahorow.
 
 

ID Kaad a Wɔde Di Dwuma

 
Wɔde ID nkrataa a wɔde gyina hɔ ma adansedi nkrataa tiawa no di dwuma de hwɛ sɛ obi yɛ onipa ko na adwumawuranom, nhomasua asoɛe ahorow, aban adwumayɛbea ahorow, ne ahyehyɛde ahorow a wɔyɛ asɔremma na wɔtaa de ma. Mpɛn pii no, wɔde ankorankoro ho nsɛm te sɛ onipa no din, ne mfonini, da a wɔwoo no, ne nɔma soronko a ɛkyerɛ sɛ ɔyɛ onipa no ka saa nkrataa yi ho. ID nkrataa di atirimpɔw ahorow ho dwuma, a nea ɛka ho ne kwan a wɔfa so kɔ hɔ, ahobammɔ ho tumi krataa, wɔn a wɔba no akyi di, ne adanse a ɛkyerɛ sɛ obi fata sɛ onya nnwuma anaa mfaso horow. Ɛho hia na ama wɔakura ahobammɔ ne akontaabu mu wɔ mmeae ahorow, te sɛ adwumayɛbea, sukuu, wimhyɛn gyinabea, ne aban adwumayɛbea ahorow.
 
 

Wallis Finished Kaad  Nneɛma a Wɔde Yɛ

WALLIS PLASTIC Ɛma ano aduru a ɛyɛ gyinabea biako ma Finished Card ahorow nyinaa, yɛdi adetɔfo biara ahiade pɔtee ho dwuma na yɛsesa nneɛma ma ɛba ne kaad a edi wɔn ahiade ho dwuma.

Finished Card a Wɔde Di Dwuma

Akyɛde Krataa
Dade Kaad
Kaad a Ɛyɛ Kurukuruwa
Embossed Kaad a Wɔde Nkyerɛwee
  • 3
  • 1
  • 2
Reasonable Price Bɛboro 10 pɛpɛɛpɛ production line, ɛnyɛ den sɛ wubehu nneɛma pii, na ama wo ne bo a eye sen biara.Bɛboro 10 pɛpɛɛpɛ production line, mmerɛw sɛ wubehu pii quantities of goods, na ama wo ne bo a eye sen biara.
  • 3
  • 1
  • 2
Reasonable Price Bɛboro 10 pɛpɛɛpɛ production line, ɛnyɛ den sɛ wubehu nneɛma pii, na ama wo ne bo a eye sen biara.Bɛboro 10 pɛpɛɛpɛ production line, mmerɛw sɛ wubehu pii quantities of goods, na ama wo ne bo a eye sen biara.
  • 3
  • 1
  • 2
Reasonable Price Bɛboro 10 pɛpɛɛpɛ production line, ɛnyɛ den sɛ wubehu nneɛma pii, na ama wo ne bo a eye sen biara.Bɛboro 10 pɛpɛɛpɛ production line, mmerɛw sɛ wubehu pii quantities of goods, na ama wo ne bo a eye sen biara.

Nea Enti a Wopaw Wallis Plastic ?

nnɔbae_ 17158429340 42

100% Ɔbaabun Nneɛma

Wɔ Wallis PLASTIC no, yɛde 100% virgin high-quality raw materials a efi mmeae a agye din di dwuma, ne saa ara nso na high-quality imported additives de yɛ card material.

nnɔbae_ 17158428560 39

Ne Kɛse ne Ne Kɛse Pɛpɛɛpɛ

Ɛne nneɛma a wɔyɛ a ɛkɔ akyiri ne nneɛma a wɔde yɛ nneɛma a ɛyɛ papa. Eyi hwɛ hu sɛ yɛn plastic a ɛwɔ transparency rate a ɛkorɔn na ɛyɛ den sɛ wɔde toto afoforo a ɛwɔ gua so ho a.

nnɔbae_ 17158430016 07

Nneɛma a Wɔde Yɛ Nneɛma a Wɔde Yɛ Adwuma

Sɛ adetɔfo wɔ adwini pɔtee bi, kɛse, anaa kɔla a wɔpɛ a, yebetumi ayɛ nsakrae wɔ yɛn nneɛma a yɛyɛ no mu ma ɛne wɔn ahiade ahorow ahyia.

 

nnɔbae_ 17158430888 91

Adetɔfo Dwumadi a Ɛkyɛn So

Yɛbu nkitahodi ne adwumayɛ a yɛne yɛn adetɔfo yɛ no sɛ ɛsom bo. Yɛde adwumayɛ mu abusuabɔ a emu yɛ den si hɔ na yɛma adetɔfo nya ɔsom mu osuahu soronko.

00abebc1084a717d6347dcb2ab918d0

100% Nhwehwɛmu

Wɔ Wallis PLASTIC no, yɛyɛ 100% nhwehwɛmu a ɛyɛ papa bere a wɔawie adwuma no, na yɛde emu nhwehwɛmu amanneɛbɔ ma ma batch biara a ɛyɛ kɛse.

nnɔbae_ 16876745861 44

Adansedi krataa a wɔahyehyɛ no nyinaa

Yɛn nneɛma no atwam wɔ SGS sɔhwɛ mu na ɛne REACH ne ROHS gyinapɛn ahorow hyia.Yɛsɔ yɛn adwumayɛbea lab no batch biara hwɛ de hwɛ sɛ wodu saa gyinapɛn ahorow yi ho.

Nnuru ne Nneɛma a Ɛwɔ  Kaad a Wɔawie no Mu

Wallis -Wɔawie Kaad

   Adeɛ no Edin

 Kaad a Wɔawie
   Adeban Wallis na ɔkyerɛwee
   Ɔfa Kaad a Wɔawie

   Abodinkrataa

 REACH , ROHS, ISO , GRS Ɔde ne nsa kyerɛɛ ne so, na ɔde ne nsa kyerɛɛ ne so bio.
   Ɔman a Wofi Mu China
   Muduro 1.36g/cm3 na ɛwɔ hɔ
   Ahoɔden a Ɛma Ntwetwe (ASTM D638) . 57Mpa na ɛyɛ
   Izod Nkɛntɛnso Notched(ASTM D256) . 39J/M na ɛwɔ hɔ
   Flexural Ahoɔden(ASTM D790) . 83Mpa na ɛyɛ
  Hann a Wɔde Fa Nkrabea 89% na ɛwɔ hɔ.
  Deflection Ɔhyew (ASTM D648 (@ 0.46Mpa)) . 68°C na ɛwɔ hɔ
  Ɔhyew a ɛma ɛyɛ mmerɛw(ASTM D1525(@1kg adesoa)) 80°C na ɛwɔ hɔ
  Glass Tansition Temp (DSC Ɔkwan °C) . 78°C na ɛwɔ hɔ

  Ahosuo

 Kɔla a Ɛda Hɔ, Fitaa, Tuntum, Kɔkɔɔ, Kɔkɔɔ, Kɔla a Wɔayɛ no Amanneɛbɔ
  Su Ahoɔden a ɛkorɔn, Nkɛntɛnso a ɛkorɔn, super transparency

  Abisadeɛ

 Akyɛde Kaad, Adwuma Krataa, ID Kaad, Sikakorabea Kaad

 Kaad nneɛma ne Coated overlay film Amanneɛbɔ a Wɔhwehwɛ mu

  • 0
     
    485 * 295 * 0.1mm na ɛwɔ hɔ
  • 0
     
    485 * 295 * 0.15mm na ɛwɔ hɔ
  • 0
     
    485 * 295 * 0.32mm na ɛwɔ hɔ
  • 0
     
    485 * 295 * 0.76mm na ɛwɔ hɔ

Ntease Ahorow a Wɔawie Kaad

 

Glossy Finish: 

Saa awie yi de ade a ɛhyerɛn ka kaad no ho, na ɛma kɔla ahorow no yɛ te sɛ nea ɛyɛ hyew na nsɛm a wɔakyerɛw no yɛ mmerɛw sɛ wɔbɛkenkan. Ɛyɛ nea agye din wɔ mfonini ne mfonini ahorow a wɔde kɔla a ɛyɛ den ayɛ ho.


Matte Finish a Wɔde Awie: 

Matte a wɔde wie no ma nkrataa no nya baabi a ɛnyɛ nea ɛdannan, na ɛyɛ torotoro. Ɛtew hann a ɛhyerɛn so na ebetumi ama ayɛ nea ɛyɛ nwonwa kɛse, na mpɛn pii no wɔpɛ sɛ wɔyɛ nneɛma nketenkete anaa nsɛmti a ɛyɛ fɛ.
 

Textured Finish a Wɔde Awie: 

Nneɛma a wɔde wie a wɔakyerɛw so no betumi afi nwera so akosi ntama anaa nsusuwso a wɔama so mpo so. Saa nneɛma a wɔde wie yi de anigye a wɔde ka kaad no ka ho, na ɛma ɛda nsow na ɛte sɛ nea ɛyɛ fɛ kɛse.

UV Nneɛma a wɔde kata so: 
Nea ɛka saa awie yi ho ne sɛ wɔde ultraviolet a ɛyɛ tratraa bɛkata kaad no so, na ama ayɛ den na ama ayɛ hann a ɛnyɛ anifere. Ebetumi ama kɔla ahorow ayɛ fɛ na abɔ kaad no ho ban na ansɛe.
 

Laminated Finish a Wɔde Awie: 

Nea ɛka lamination ho ne sɛ wɔde plastic a ɛyɛ tratraa bɛkyekyere kaad no ani, na ɛbɔ ho ban fi nsu, tetew, ne nneɛma afoforo a ɛsɛe ho. Ɛma nkrataa te nka sɛ ɛyɛ den na ɛyɛ adwumayɛfo hwɛbea.
 

Foil a Wɔde Awie: . 

Foil stamping de dade nnyigyei ka kaad no mmeae pɔtee bi ho, na ɛma ɛyɛ nea ɛhyerɛn na ɛtwetwe adwene. Wɔtaa de yɛ logo, nsɛm, anaa nneɛma a wɔde siesie fie na ama ayɛ pop.
 

Embossed anaa Debossed a Wɔde Awie:

Embossing ma card no ani afã horow kɔ soro, bere a debossing mia so. Saa nneɛma a wɔde wie yi de texture ne dimension ka adwini no ho, na ɛma wonya nea efi mu ba a wotumi de wɔn nsa ka na ɛyɛ nwonwa wɔ aniwa so.
 
059A2343 na ɛwɔ hɔ
 

Sɛnea Kaad Ahorow Ahorow a Wɔawie a Wotumi De Di Dwuma Wɔ Mpɛn pii no

 

Gyinapɛn PVC card s: . 

Eyinom ne plastic nkrataa a wɔtaa de di dwuma na wɔde di dwuma kɛse wɔ nneɛma ahorow mu te sɛ ID nkrataa, asɔremma kaad, kwan a wɔfa so kɔ hɔ, ne akyɛde nkrataa. Wɔyɛ nea ɛyɛ den, emu yɛ hare, na wotumi sesa wɔn ho sɛnea wɔpɛ.

 

Smart card s:: 

Saa kaad yi kura microchips anaa RFID (Radio Frequency Identification) mfiridwuma a wɔde ahyɛ mu, na ɛma wotumi de data sie na wɔde mena wɔ kɔmputa so. Wɔde smart cards di dwuma ma application ahorow te sɛ access control, payment cards, public transport cards, ne secure identification.
 

Kaad a Ɛda Hɔ: 

Wɔde plastic a ɛyɛ mmerɛw na ɛyɛ saa nkrataa yi, na ɛma ɛyɛ soronko na ɛyɛ nnɛyi de. Wɔtaa de yɛ adwuma ho nkrataa, nneɛma a wɔde hyɛ nkurɔfo nkuran, anaa nhyiam titiriw bi a wɔto nsa frɛ wɔn wɔ baabi a wɔpɛ sɛ wɔyɛ fɛ na ɛda nsow.
 

Dade a Ɛnyɛ Den a Wɔde Yɛ Kaad:

Dade a ɛnyɛ den kaad yɛ nea ɛyɛ nwonwa sɛ ɛyɛ den na ɛtumi nsɛe, na ɛma ɛfata ma dwumadie a ɛho hia sɛ ɛtra hɔ kyɛ, te sɛ asɔremma kaad, VIP kaad, anaa kaad a ahobammɔ kɛse wom.
 

 

PET Kaad no mu Nneɛma Titiriw

 
PET kaad no mu ade titiriw gyina ne nneɛma ne nneɛma soronko a ɛde ma no so. PET (Polyethylene Terephthalate) yɛ plastic a ɛyɛ den na ɛyɛ adwuma pii a wɔtaa de yɛ kaad. Nneɛma atitiriw bi a ɛfa PET kaad mu ade titiriw bi ni:
 

Sɛnea ɛtra hɔ kyɛ: 

PET yɛ nea wonim no sɛ ɛyɛ ahoɔden ne ahoɔden a ɛtumi gyina ano, na ɛma PET kaad ntumi nkotow, tetew, na nsuo ntumi nkɔ mu. Saa bere a ɛtra hɔ kyɛ yi hwɛ hu sɛ PET kaad ahorow no kura ne su ne ne mũdi mu bere tenten, mpo sɛ wɔtaa de di dwuma a.
 

Nneɛma a wɔde yɛ nneɛma pii: 

PET kaad betumi adi dwuma ama dwumadie ahodoɔ pii, a ID kaad, kwan a wɔfa so kɔ hɔ, nokwaredi kaad, asɔremma kaad, ne nea ɛkeka ho ka ho. Sɛnea wotumi yɛ nneɛma pii no ma wɔfata ma nnwuma ne atirimpɔw ahorow.
 

Nneɛma a Atwa Yɛn Ho Ahyia Ho Adamfofa: 

PET yɛ ade a wotumi san de di dwuma, na ɛma PET kaad yɛ ɔkwan a ɛnyɛ nea atwa yɛn ho ahyia sɛ wɔde toto plastic afoforo ho a. Wobetumi asan de adi dwuma na wɔasan de adi dwuma bio, na aboa ma wɔabɔ mmɔden sɛ wɔbɛma nneɛma akɔ so atra hɔ daa na ɛtew nneɛma a atwa yɛn ho ahyia so nkɛntɛnso so.
 
 
PETG 12. Ɔde ne nsa kyerɛɛ ne so
 

Nkɔso a Ɛtra Hɔ a Ɛwɔ Hɔ a Ɛwɔ Hɔ a Ɛwɔ Hɔ a Ɛnsɛ Nso

 
 

PET 's Resistance to Wear and Tear. Ɔde ne nsa kyerɛɛ ne so

PET kaad nneɛma hoahoa ne ho sɛ ɛyɛ nwonwa sɛ ɛtra hɔ kyɛ, na egyina hɔ a egyina da biara da dwumadie mu kateeyɛ ano. Sɛ́ ebia wɔtaa di ho dwuma anaasɛ nneɛma a atwa yɛn ho ahyia a ɛhaw adwene no, PET nkrataa no kura ne nhyehyɛe mu mudi mu, na ɛhwɛ hu sɛ ɛtra hɔ kyɛ a ɛnsɛe ne su.
 

Abɔde a Nsu Ntumi Nni Mu

Wɔ ɔko a wɔko tia nneɛma a ɛwɔ hɔ no mu no, PET pue sɛ akansifo a ne ho yɛ hu. Sɛnea ɛko tia nsu fi awosu mu no ma ɛyɛ nea eye ma nkrataa a ebia ebehyia nsu. Saa ade yi ho hia titiriw ma application ahorow te sɛ ID card ne access control cards a ɛhwehwɛ sɛ wotumi gyina nneɛma a atwa yɛn ho ahyia ano.
 

Bere Tenten Ka a Wɔbɔ no Yiye

Bere a PET kaad betumi anya ɛka a wɔbɔ ansa na wɔayɛ no kɛse kakra sɛ wɔde toto krataa kaad ho a, sɛnea ɛtra hɔ kyɛ ne ne nkwa tenten ma ɛyɛ sika a ɛho ka sua wɔ bere tenten mu. Ɛho renhia sɛ wobɛsesa wɔn mpɛn pii saa, na bere kɔ so no, wobɛkora sika so.

 

Nneɛma a Ɛfa Nneɛma a Atwa Yɛn Ho Ahyia Ho
 

PET 's Nneɛma a Wɔsan De Di Dwuma

Bere a ɔredi nneɛma a atwa yɛn ho ahyia ho haw ahorow ho dwuma no, PET da ne fã a ɛnyɛ nea ɛmma nneɛma a atwa yɛn ho ahyia no adi denam nneɛma a wɔsan de di dwuma so. Sɛ́ thermoplastic polymer no, wobetumi asan de PET adi dwuma bio, aboa ma wɔabɔ mmɔden sɛ wɔbɛma nneɛma akɔ so atra hɔ daa na ɛmma nneɛma a atwa yɛn ho ahyia so nkɛntɛnso a ɛbata kaad a wɔyɛ ho no so tew.

 

 

 

   

PC Nteaseɛ Kaad

 
PC kaad, anaa ɔmansin kaad a wɔatintim, yɛ ɛlɛtrɔnik mfiri nkwa, na ɛma nkitahodi a ɛda nneɛma ahodoɔ ntam no yɛ mmerɛ. Nneɛma a wɔpaw de yɛ saa nkrataa yi di dwuma titiriw wɔ wɔn adwumayɛ nyinaa mu. Yɛde ahwɛyiye hwehwɛ nneɛma atitiriw a ɛboa ma PC nkrataa yɛ papa no mu.
 

1. Leveraging High-Quality Substrates

Substrate, anaasɛ PC kaad no nnyinaso ade no ne nea ɛho hia sen biara. Yɛkamfo kyerɛ sɛ wɔmfa nneɛma a ɛyɛ papa a ɛma ɔhyew a ɛyɛ den ne anyinam ahoɔden a ɛmma anyinam ahoɔden ntumi nkɔ mu nni dwuma. Wei hwɛ sɛ PC kaad no tumi gyina nneɛma a atwa yɛn ho ahyia tebea ahorow ano a ɛremma ne dwumadie nsɛe.
 

2. Embracing Advanced Conductor Materials

Akwan a ɛkɔ akyiri a ɛwɔ PC kaad so no ho hia kɛse ma nsɛnkyerɛnne a wɔde mena yiye. Yɛpene so sɛ wɔmfa nneɛma a ɛkɔ akyiri a wɔde fa nsu mu, te sɛ kɔbere ne aluminium a wɔde afra, na ama nsu a ɛkɔ mu no ayɛ kɛse na ama nsɛnkyerɛnne a ɛyera no ayɛ ketewaa bi. Eyi ma data a wɔde kɔ baabi foforo ntɛmntɛm na ɛma adwumayɛ nyinaa tu mpɔn.
 
 
pc (10) .

Nkɔmmɔbɔ Nhyehyɛe

Wo ne yɛn nkasa
形状结合
形状结合备份
  • <span style='font-size:26px;'><strong>Wechat na ɛyɛ adwuma</strong></span>
  • <strong><span style='font-size:26px;'>Linkedin a ɛwɔ hɔ</span></strong>
  • <strong><span style='font-size:26px;'>WhatsApp na ɛyɛ adwuma</span></strong>

Kaad a Wɔawie  FAQ

  • So PETG Overlay film s yɛ den, na ɛbɔ kaad ho ban yiye?

    Yiw, PETG Overlay film s yɛ nea wotumi de di dwuma wɔ akwan horow so na wobetumi de adi dwuma wɔ kaad ahorow so. Sɛ woreyɛ adwuma kaad, ID kaad, asɔremma kaad, anaa aguadi kaad, PETG Overlay film s ma ahobammɔ ne polished layer. Wɔne inkjet ne laser mfiri a wɔde tintim nhoma nso hyia, na ɛma ɛfata ma nnwuma ahorow pii a wɔde yɛ kaad.

  • So wobetumi PETG Overlay film s adi dwuma wɔ kaad ahorow so?

    Yiw, PETG Overlay film s yɛ nea wotumi de di dwuma wɔ akwan horow so na wobetumi de adi dwuma wɔ kaad ahorow so. Sɛ woreyɛ adwuma kaad, ID kaad, asɔremma kaad, anaa aguadi kaad, PETG Overlay film s ma ahobammɔ ne polished layer. Wɔne inkjet ne laser mfiri a wɔde tintim nhoma nso hyia, na ɛma ɛfata ma nnwuma ahorow pii a wɔde yɛ kaad.

  • Dɛn ne PETG Overlay film , na ɔkwan bɛn so na wɔde di dwuma wɔ kaad yɛ mu?

    PETG Overlay film yɛ plastic film a ɛyɛ mmerɛw a wɔde di dwuma wɔ kaad yɛ mu de ma ɛyɛ den na ɛyɛ fɛ. Wɔde gu nkrataa a wɔatintim so de bɔ ho ban na ansɛe bere a wɔde aduru a ɛhyerɛn na ɛyɛ adwumayɛfo de ka ho no. Wɔde PETG ]} (Polyethylene Terephthalate Glycol), a ɛyɛ thermoplastic polymer a ɛyɛ papa a wonim no sɛ ɛyɛ pefee na ɛyɛ den na ɛyɛ saa Overlay film yi.

    Nsɛm Titiriw:

    1. PETG Overlay film yɛ plastic film a ɛyɛ mmerɛw.
    2. Ɛma kaad no tumi kyɛ na ɛyɛ fɛ yiye.
    3. Wɔde PETG , a ɛyɛ thermoplastic a ɛyɛ den na emu da hɔ na ɛyɛe.

  • Ɛhe na wobetumi de PVC kaad ho nneɛma adi dwuma?

    1. PVC kaad ho nneɛma na wɔde yɛ adansedie nkrataa, sikatua nkrataa, nokwaredi ne akatua nkrataa, akyɛdeɛ nkrataa, adeyɛ ne tekiti nkrataa, ahɔhodan mu safe kaad, ne akwantuo nkrataa.
    2. PVC kaad ma ɛyɛ den na ɛyɛ mmerɛw ma mpɛn pii a wɔde di dwuma na ɛho tetew.
    3. Wobetumi de mfiridwuma ahorow ahyɛ mu, te sɛ magnetic stripes, EMV chips, RFID / NFC , ne barcodes anaa QR codes, a egyina application no ahwehwɛde so

  • Mfaso bɛn na ɛwɔ afieboa kaad nneɛma so?

    1. PET kaad no yɛ nea ɛnyɛ nea ɛmma nneɛma a atwa yɛn ho ahyia na wotumi san de di dwuma bio.
    2. Wɔyɛ den yiye na wontumi nsɛe.
    3. PET nneɛma ma ɛda adi yiye ma tintim a emu da hɔ na ɛyɛ hyew.
    4. PET nkrataa da ahoɔden a ɛko tia nnuru, ngo, ne nnuru a wɔde siw ano adi.

  • Dɛn na wɔde yɛ PVC nkrataa?

    PVC nkrataa a wɔsan frɛ no polyvinyl chloride kaad no, wɔde plastic bi a wɔfrɛ no polyvinyl chloride titiriw na ɛyɛ. PVC yɛ synthetic polymer a wɔde di dwuma kɛse a wonim no sɛ ɛyɛ den, ɛyɛ mmerɛw, na ɛko tia nsu ne nnuru. Wɔtaa de di dwuma wɔ application ahorow mu, a ID card, credit card, membership card, ne access card ka ho.

  • Ɛhe na wobɛtɔ Kaad nneɛma ?

    WALLIS PLASTIC Ɛma ano aduru a ɛwɔ baabi baako ma Kaad nneɛma s ahodoɔ nyinaa, yɛdi adetɔfoɔ biara ahiadeɛ pɔtee ho dwuma na yɛsesa nneɛma ma ɛde kaad a ɛdi wɔn ahiadeɛ ho dwuma.

Factory FAQ a Wɔtaa bisa

Fi Yɛn Dwumadi no ase

Fa Yɛn Quotation a Ɛsen Biara Di Dwuma
Shanghai Wallis Technology Co., Ltd yɛ adwumayɛfo a wɔde nneɛma ma a wɔwɔ afifide 7 a wɔde Plastic Nkratafa, Plastic Film, Kaad Base Material, Kaad Ahorow Nyinaa, ne Amanne Fabrication Service ma Finished Plastic Products.

Nneɛma a wɔyɛ

Nkitahodi a Ɛyɛ Ntɛmntɛm

Di nkutaho
      adetɔn@wallis-plastic.com
   +86 13584305752 akyerɛw
  No.912 YeCheng Kwan, Jiading Nnwumayɛbea mpɔtam, Shanghai
© NKYERƐKYERƐMU HO KWAN 2026 SHANGHAI WALLIS MMƆDENBƆ HO NSƐM CO.,LTD. HO KWAN NYINAA WƆ HƆ.