Wɔ nnɛyi kaad a wɔyɛ a ɛrenya nkɔso ntɛmntɛm no mu no, RFID prelam nkrataa abɛyɛ ade titiriw a wɔde yɛ smart card a ɛyɛ papa. Saa nkrataa yi yɛ adwuma sɛ nhyehyɛe titiriw a ɛka RFID inlays — chips ne antennas a wɔde ahyɛ mu — bom yɛ PVC layers a ɛtra hɔ kyɛ, na ɛma wotumi yɛ kaad a enni nkitahodi pii yiye.
Inlay yɛ kaad nipadua a ɛwɔ mu, a ɛwɔ nneɛma a wɔde kata so ntam. Nea ɛnte sɛ ade a wɔde kata so (a ɛbɔ ɔfasu no ho ban), inlay no hwɛ hu sɛ kaad no nhyehyɛe yɛ pɛpɛɛpɛ na ebetumi nso de smart card mfiridwuma te sɛ RFID chips ne antennas ahyɛ mu.
Wɔ smart card adwumayɛ mu no, inlays ahodoɔ titire mmienu na ɛwɔ hɔ: Core Sheet Inlays – Plain structural core for standard cards. RFID Prelam Inlays – Core nkrataa a wɔadi kan ayɛ no RFID chips ne antennas.
125KHz Inlay 13.56MHz Nneɛma a wɔde hyɛ mu
PVC PETG PC a wɔde hyɛ mu
Pre-Inlay Ansa na wɔreyɛ prelam
Inlay wɔ Kaad a Wɔyɛ mu
PVC Core Krataa Inlays a wɔde hyɛ mu
Nkyerɛkyerɛmu a ɛfa biribiara ho
PVC core krataa ne kaad no nipadua titiriw.
Mpɛn pii no, wɔde sini abien a wɔde kata so ntam.
Wɔayɛ no sɛnea ɛbɛyɛ a ɛbɛtena hɔ akyɛ, agyina pintinn, na ɛnyɛ den sɛ wɔbɛbɔ no.
RFID Prelam Nneɛma a wɔde hyɛ mu
Nkyerɛkyerɛmu a Ɛfa Nsɛm Ho
Prelaminated inlay ka antenna ne chip bom wɔ PVC nkrataa mu ansa na wɔayɛ lamination.
Ɛma nkitahodi a enni nkitahodi ma nnɛyi smart card ahorow.
Wɔayɛ no sɛnea ɛbɛyɛ a ɛbɛtena hɔ akyɛ kɛse na wɔde ahyɛ kaad a etwa to no mu a ɛnyɛ den.
125 kHz RFID Inlays (Nneɛma a ɛba fam – LF) .
125 kHz inlays yɛ RFID ano aduru a ɛnyɛ frequency a wɔde di dwuma kɛse wɔ application ahorow a ɛhwehwɛ nkitahodi a ɛkɔ akyiri, a wotumi de ho to so mu. Wɔyɛ adwuma yiye wɔ mmeae a dade anaa nsu a ɛtwetwe adwene wɔ hɔ a ebia mpɛn dodow a ɛkorɔn no bedi nkogu.
13.56 MHz RFID Inlays (Mpɛn dodow a ɛkorɔn – HF) .
13.56 MHz inlays yɛ RFID ano aduru a ɛwɔ frequency a ɛkorɔn, a ɛma data tumi ne ahobanbɔ nneɛma a eye sen LF inlays. Eyi ma wɔyɛ gyinapɛn ma sikatua ne akwantu nhyehyɛe ahorow.
Shanghai Wallis Technology Co., Ltd. yɛ adwinnan ne ano aduru a wɔde ma a ɛyɛ adwuma titiriw wɔ RFID inlays, nneɛma a wɔde kata so, ne mfiri a wɔde yɛ kaad a wɔyɛ mu. Esiane sɛ Wallis de mfe pii ayɛ smart card mfiridwuma mu nimdeɛ nti, wagye din a emu yɛ den sɛ ɔde nneɛma a wotumi de ho to so na ɛyɛ papa a wiase nyinaa afɛfo de wɔn ho to so ma.
Wɔ Wallis no, yɛyɛ inlays ahorow pii, a nea ɛka ho ne: Core Sheet Inlays ma standard card structures Antenna Inlays (coil nkutoo, chip biara nni hɔ) ma flexible customization RFID Prelam Inlays a embedded chip ne antenna ma krado-to-laminate applications
Yɛn inlays no wɔ frequency ahodoɔ mu – 125 kHz (LF), 13.56 MHz (HF/NFC), ne UHF – de di gua so ahiadeɛ ahodoɔ ho dwuma, ɛfiri access control ne identification so kɔsi sikakorabea, akwantuo, ne smart payment systems so.
Wallis------ Nneɛma a wɔyɛ
Wallis nneɛma yɛ nea wɔn a wɔyɛ kaad, aban nnwumakuw, sikakorabea ahorow, ne nhoma tintim adwumayɛbea ahorow a ɛwɔ aman bɛboro 50 mu no gye di.
Reasonable Price Bɛboro 10 pɛpɛɛpɛ production line, ɛnyɛ den sɛ wubehu nneɛma pii, na ama wo ne bo a eye sen biara.Bɛboro 10 pɛpɛɛpɛ production line, mmerɛw sɛ wubehu pii quantities of goods, na ama wo ne bo a eye sen biara.
Reasonable Price Bɛboro 10 pɛpɛɛpɛ production line, ɛnyɛ den sɛ wubehu nneɛma pii, na ama wo ne bo a eye sen biara.Bɛboro 10 pɛpɛɛpɛ production line, mmerɛw sɛ wubehu pii quantities of goods, na ama wo ne bo a eye sen biara.
Reasonable Price Bɛboro 10 pɛpɛɛpɛ production line, ɛnyɛ den sɛ wubehu nneɛma pii, na ama wo ne bo a eye sen biara.Bɛboro 10 pɛpɛɛpɛ production line, mmerɛw sɛ wubehu pii quantities of goods, na ama wo ne bo a eye sen biara.
SGS, adwumakuw bi a aman pii wom a wɔn adwumayɛbea ti wɔ Switzerland a wɔn ho akokwaw wɔ nhwehwɛmu, nokwaredi, sɔhwɛ, ne adansedi adwuma mu. SGS Detection betumi afa wɔn tumi a wɔde hu nneɛma ahorow, efĩ, anaa nneɛma a ɛnteɛ wɔ nneɛma, nneɛma, anaa nneɛma a atwa yɛn ho ahyia mu denam sɔhwɛ akwan ne mfiridwuma a ɛkɔ akyiri a wɔde di dwuma no ho titiriw. Eyi betumi aka nnwuma ahorow pii a aduan, nnuru, nnuru, nneɛma a atwa yɛn ho ahyia, ne nea ɛkeka ho ka ho.
Amanneɛbɔ a Wɔhwehwɛ Mu
485 * 295 * 0.1mm na ɛwɔ hɔ
485 * 295 * 0.15mm na ɛwɔ hɔ
485 * 295 * 0.32mm na ɛwɔ hɔ
485 * 295 * 0.76mm na ɛwɔ hɔ
Nteaseɛ a ɛfa Inlay Sheet ho
Inlay sheet yɛ ntamgyinafoɔ a wɔasiesie no titire a wɔde di dwuma wɔ kaad a wɔyɛ mu (te sɛ ID kaad, smart card, sikakorabea kaad, asɔremma kaad, anaa RFID kaad). Ɛtaa yɛ adwuma sɛ kaad no nhyehyɛe titiriw, a wɔde si sini ahorow a wɔde kata so ntam bere a wɔreyɛ lamination no.
Inlay krataa no na ɛkyerɛ kaad no dwumadi ne ne su atitiriw pii, a nea ɛka ho ne sɛnea ɛbɛtena hɔ akyɛ, sɛnea ɛyɛ mmerɛw, na wɔ tebea horow bi mu no, sɛ wɔde RFID afã horow ahyɛ mu a, ɛlɛtrɔnik adwumayɛ.
Inlay Nkratafa Ahorow
Plain PVC Inlay Sheets Wɔde PVC plastic a ɛyɛ gyinapɛn na ɛyɛe. Som sɛ kaad no nhyehyɛe nnyinaso a enni ɛlɛtrɔnik dwumadi. Wɔtaa de di dwuma wɔ nkrataa a wɔatintim a ɛnyɛ den mu (nokwaredi nkrataa, asuafo nkrataa, asɔremma nkrataa).
RFID / Nkrataa a wɔde hyɛ mu a enni nkitahodi
Kɔbere antenna ne microchips a wɔde ahyɛ mu. Ma mfiridwuma a enni nkitahodi te sɛ 125KHz, 13.56MHz, anaa UHF frequency ahorow nyɛ adwuma. Wɔde di dwuma wɔ access control cards, transport cards, payment cards, ne nneɛma a NFC tumi yɛ mu.
Prelaminated (Prelam) Nkratafa a Wɔde Nhyɛ Mu
Inlays a wɔadi kan asiesie a antenna ne chips a wɔde laminated dedaw wɔ PVC anaa PETG nkrataa mu. Ma ahoɔden a ɛkorɔn na ɛnyɛ den sɛ wobɛkɔ so ayɛ adwuma (tintim, punching). Wɔde di dwuma kɛse wɔ mfiridwuma mu kaad a wɔyɛ mu.
Wɔde Plain PVC Inlay Nkrataa a Wɔde Di Dwuma no ba
Plain PVC Inlay Sheets yɛ mfitiaseɛ core layers a wɔde di dwuma wɔ card manufacturing mu. Wɔde polyvinyl chloride (PVC) nneɛma a ɛlɛtrɔnik nneɛma biara te sɛ chips anaa antenna nni mu na ɛyɛ. Wɔn dwumadi titiriw ne sɛ wɔbɛyɛ adwuma sɛ kaad no fapem a wɔde yɛ nhyehyɛe, na ama ahoɔden, akyɛ, ne baabi a ɛyɛ torotoro a wɔde bɛkɔ so ayɛ lamination, tintim, anaa personalization.
Wɔde saa nkratafa yi si sini ahorow a wɔde kata so ntam bere a wɔreyɛ lamination no, baabi a ɔhyew ne nhyɛso ka ntoatoaso no bom yɛ no kaad a wɔawie.
Mfaso a ɛwɔ Plain PVC Inlay Sheets so
Cost-Effective – Ɔkwan a ne bo yɛ den kɛse sɛ wɔde toto RFID anaa ɛlɛtrɔnik inlays ho a. Versatile – Ɛfata ma kaad ahorow pii, efi ID so kosi promotional card so. Durable – Ɛko tia sɛ ɛbɛkotow, apaapae, na ɛbɛhyɛ da biara da. Customizable – Wobetumi ayɛ no akɛse, ne kɛse, ne kɔla ahorow a egyina akraman ahiade so. Ɛne Ntintim hyia – Ɛyɛ adwuma yiye wɔ offset tintim, screen tintim, dijitaal tintim, ne lamination.
Dɛn ne RFID / Contactless Inlay Nkrataa?
RFID (Radio Frequency Identification) / Contactless Inlay Sheets yɛ core sheets a wɔayɛ no titiriw a ɛlɛtrɔnik nneɛma a wɔde ahyɛ mu—te sɛ antenna coils ne microchips—a ɛma kaad tumi yɛ nkitahodi a wɔmfa nhama nkɔ mu.
Saa inlay sheets yi yɛ koma a ɛyɛ adwuma wɔ contactless smart cards mu, na ɛma wotumi de data sie na wɔde mena a honam fam nkitahodi biara nni ho. Wɔde di dwuma kɛse wɔ akwan a wɔfa so kɔ hɔ, akwantu, sikakorabea, ne NFC dwumadie mu.
125KHz (Frequency a ɛba fam – LF) .
Nkɔanim: 2–10 cm (ɛkɔ tiawa). Data Speed: Ɛyɛ brɛoo, na ɛnyɛ den sɛ wobɛkae ade. Adwumayɛ: Ɛyɛ adwuma yiye wɔ baabi a ɛbɛn dade, nsu, ne mmeae a ɛyɛ den. Ahobammɔ: Mfitiase, ɛnyɛ nea wɔde encrypt; ɛfata kɛse ma sɛnea wɔde hu obi a ɛnyɛ den. Ɛka: Mpɛn pii no, ɛba fam bere a wɔde toto HF ne UHF ho no.
13.56MHz (Mpɛn dodow a ɛkorɔn – HF / NFC) .
Ne tenten: Ɛkɔsi sɛntimita 10. Data Speed: Ɛyɛ ntɛm sen LF, ɛboa data a wɔkora so a ɛyɛ den kɛse. Adwumayɛ: Kari pɛ yiye wɔ baabi a wobetumi akɔ, ahoɔhare, ne ahobammɔ ho. Ahobanbɔ: Ɛboa encryption & nokwaredi (sɛ nhwɛso no, MIFARE®, DESFire®). Gyinapɛn: ISO/IEC 14443, ISO/IEC 15693, NFC.
UHF (860–960MHz, Mpɛn dodow a ɛkorɔn yiye) .
Range: Ɛkɔ mita 10 (ɛkɔ tenten). Data Ahoɔhare: Ɛkɔ soro yiye; betumi akenkan tag ɔhaha pii prɛko pɛ. Adwumayɛ: Eye ma akenkan pii ne akyidi, nanso ɛnyɛ den pii wɔ baabi a ɛbɛn nsu/dade. Ahobammɔ: Ɛkɔ fam; protocol foforo ma ahobammɔ tu mpɔn nanso ɛnyɛ den te sɛ HF ma sikasɛm mu dwumadie. Gyinapɛn: ISO/IEC 18000-6C (EPC Gen 2).
Dɛn ne Prelaminated (Prelam) Inlay Nkrataa?
Prelaminated Inlay Sheets, a wɔsan frɛ no Prelam Inlays, yɛ card core sheets a wɔadi kan asiesie a antenna ne microchips a wɔde ahyɛ mu dedaw, a wɔde laminated wɔ nneɛma a ɛyɛ den te sɛ PVC, PET, anaa PETG mu.
Wɔyɛ adwuma sɛ nnyinaso a wɔde yɛ RFID smart cards, na ɛma adeyɛ no yɛ adwuma yiye, ɛyɛ den, na wotumi de ho to so. Sɛ́ anka wɔbɛboaboa chips ne antenna ano wɔ ɔkwan soronko so no, wɔn a wɔyɛ kaad no betumi de prelam inlays adi dwuma tẽẽ, afei wɔde nneɛma a wɔde kata so atintim, abɔ, na wɔde awie kaad no.
Nneɛma Titiriw a Ɛwɔ Prelam Inlay Nkratafa Mu
Integrated Structure – Wɔadi kan ayɛ chip ne antenna wɔ krataa no mu. High Durability – Ɛko tia ɔhyew, nhyɛso, ne bending bere a lamination. Stable Performance – Ɛhwɛ hu sɛ chip-to-antenna bonding ne alignment a ɛfata. Easy Processing – Ɛma kaad yɛ anammɔn foforo te sɛ tintim, punching, ne personalization yɛ mmerɛw. Customizable – Ɛwɔ hɔ wɔ akɛseɛ ahodoɔ, frequency (125KHz, 13.56MHz, UHF), ne multi-chip designs.
Yiw, PETG a wɔde kata so no yɛ nea wotumi de di dwuma wɔ mmeae ahorow na wobetumi de adi dwuma wɔ kaad ahorow so. Sɛ́ ebia woreyɛ adwuma kaad, ID kaad, asɔremma kaad, anaa aguadi kaad no, PETG nkataso ma wonya ahobammɔ na ɛyɛ fɛ. Wɔne inkjet ne laser mfiri a wɔde tintim nhoma nso hyia, na ɛma ɛfata ma nnwuma ahorow pii a wɔde yɛ kaad.
Yiw, PETG a wɔde kata so no yɛ nea wotumi de di dwuma wɔ mmeae ahorow na wobetumi de adi dwuma wɔ kaad ahorow so. Sɛ́ ebia woreyɛ adwuma kaad, ID kaad, asɔremma kaad, anaa aguadi kaad no, PETG nkataso ma wonya ahobammɔ na ɛyɛ fɛ. Wɔne inkjet ne laser mfiri a wɔde tintim nhoma nso hyia, na ɛma ɛfata ma nnwuma ahorow pii a wɔde yɛ kaad.
PETG overlay yɛ plastic film a ɛyɛ mmerɛw a wɔde di dwuma wɔ card yɛ mu de ma ɛyɛ den na ɛyɛ fɛ. Wɔde gu nkrataa a wɔatintim so de bɔ ho ban na ansɛe bere a wɔde aduru a ɛhyerɛn na ɛyɛ adwumayɛfo de ka ho no. Wɔde PETG (Polyethylene Terephthalate Glycol), a ɛyɛ thermoplastic polymer a ɛyɛ papa a wonim no sɛ emu da hɔ na ɛyɛ den na ɛyɛ saa akataso yi.
Nsɛm Titiriw:
PETG overlay yɛ plastic film a ɛyɛ mmerɛw.
Ɛma kaad no tumi kyɛ na ɛyɛ fɛ yiye.
Wɔde PETG, a ɛyɛ thermoplastic a ɛyɛ den na emu da hɔ na ɛyɛe.
Wɔde PVC kaad nneɛma di dwuma de yɛ adansedi nkrataa, sikatua nkrataa, nokwaredi ne akatua nkrataa, akyɛde nkrataa, adeyɛ ne tekiti nkrataa, ahɔhodan mu safe nkrataa, ne akwantu nkrataa.
PVC kaad ma ɛyɛ den na ɛyɛ mmerɛw ma wotumi di ho dwuma mpɛn pii na ɛho tetew.
Wobetumi de mfiridwuma ahorow te sɛ magnetic stripes, EMV chips, RFID/NFC, ne barcodes anaa QR codes ahyɛ mu, a egyina application no ahwehwɛde ahorow so
Wɔde plastic bi a wɔfrɛ no polyvinyl chloride titiriw na ɛyɛ PVC nkrataa a wɔsan frɛ no polyvinyl chloride kaad. PVC yɛ aduru a wɔde yɛ nneɛma a wɔde di dwuma kɛse a wonim no sɛ ɛyɛ den, ɛyɛ mmerɛw, na ɛko tia nsu ne nnuru. Wɔtaa de di dwuma wɔ application ahorow mu, a ID card, credit card, membership card, ne access card ka ho.
WALLIS PLASTIC Ɛde ano aduru a ɛwɔ baabi biako ma Card Materials ahorow nyinaa, yɛdi adetɔfo biara ahiade pɔtee ho dwuma na yɛsesa nneɛma ma ɛba ne card a edi wɔn ahiade ho dwuma.
Shanghai Wallis Technology Co., Ltd yɛ adwumayɛfo a wɔde nneɛma ma a wɔwɔ afifide 7 a wɔde Plastic Nkratafa, Plastic Film, Kaad Base Material, Kaad Ahorow Nyinaa, ne Amanne Fabrication Service ma Finished Plastic Products.
