More Language

PVC ABS Acrylic Edge Banding min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

Ji tɛ se ka don a la min bɛ a kɛlɛ Surface Heat and Chemical Resistance
Izini bɛ min di, ji tɛ min na, o min bɛ se ka sɔgɔsɔgɔ, a kɛra PVC, ABS, walima acrylique ye, o bɛ na ni 
nafa min tɛ se ka suma ni bi minɛnw dilanni ye—o bɛ lakanani, muɲuli, cɛɲi, ani hali sugandiliw di minnu bɛ sigida lamini.

Sourcing Edge Banding ka bɔ Wallis fɛ

 Ka PVC Edge Banding kɛ

PVC dawolo banding ye dakunw dɔ ye min bɛ kɛ ka caya mebɛriw dilanni na. A dilannen don ni kuloridi polivinili ye, o ye polimɛri plastiki dilannen ye min bɛ se ka kɛ fɛn caman ye, wa a musaka ka dɔgɔ.

 Ka ɲɛsin PVC Film Dilanbaga & A feerelaw ma

ABS ye plastiki ye min tɛ fɛnɲɛnamaw tiɲɛ PVC nɔ na. A bɛ o ɲɔgɔnna fɛnw di nka kulori tɛ a la, o b’a to a bɛ sabati ani a bɛ se ka segin ka kɛ fɛn wɛrɛ ye.

 Ka ɲɛsin Acrylic Edge Banding ma

Acrylic edge banding bɛ fini ɲuman di ni kɛnɛya ni jɛya ye min ka bon kosɛbɛ. A ka c’a la, a bɛ kɛ bi minɛnw ni kabiniw ye minnu ka bon kosɛbɛ.

Edge banding ye fɛn fitinin ye min bɛ kɛ mebɛri panɛriw dakunw na minnu bɛ kɛnɛ kan (a ka c’a la, u dilannen don ni MDF, particleboard walima plywood ye) walasa ka ɲɛda cogoya dafalen di, ka fɛn kolomaw lakana, ani ka u muɲuli bonya. A jɔyɔrɔ ka bon kosɛbɛ mebɛriw ka fɛnw cɛɲi n’u baarakɛcogo bɛɛ la.

Mun ia Edge Banding

 
 
1749108625612
 
Edge banding ye fɛn nafamaba ye bi minɛnw dilanni na. A bɛ panɛriw ka minɛnw lakana, k’u cɛɲi, k’u si janya, k’a sɔrɔ a bɛ fɛn dilannikɛlaw dɛmɛ u ka se ka fɛn caman sɛgɛsɛgɛ u dilanni n’u kɔnɔfɛnw sugandili la. I mana kɛ fɛnw ye minnu tɛ musaka bɔ walima minnu dilannen don ni fɛn dilannenw ye minnu ka bon, ni i ye dakunw bandi ɲuman sugandi, o bɛ se ka i ka fɛn dilannen nafa n’a yecogo kɔrɔta kosɛbɛ.

PVC Edge Banding (Banding) min bɛ kɛ

PVC Edge Banding ɲɛmɔgɔba ani a dilannikɛla

PVC Edge Banding ka baarakɛcogo:

A bɛ se ka wuli ka bɔ a nɔ na ani a kɛli ka nɔgɔn – a bɛnnen don dakun tilennenw ni dakun kurulenw ma.

Kulɛriw, fɛn dilannenw, ani finiw suguya caman – i n’a fɔ jirikisɛw, kulɛri gɛlɛnw, matte, gloss, ani high-gloss.

Ji ni kemikɛlifɛnw tɛ se ka don a la – a ka ɲi dumunikɛyɔrɔ ni sanuyaso minɛnw ma.

Mankan-bɔn – a bɛ dɛmɛ ka mankan dɔgɔya ka bɔ panɛri yɛrɛyɛrɛw la.
 

PVC Edge Banding Nafa minnu bɛ a la:

Sɔrɔko siratigɛ la ani a bɛ sɔrɔ nɔgɔya la.

Muɲuli ɲuman don don o don baara kama.

A ka nɔgɔn ka masin kɛ ni standard edge banding equipment ye.
 
1747724806429

ABS Edge Banding (Banda) min bɛ kɛ

ABS Edge Banding ɲɛmɔgɔba ani a dilannikɛla

ABS Edge Banding ka baarakɛcogo:

A tɛ fɛnɲɛnamaw tiɲɛ ani a bɛ se ka segin ka kɛ fɛn wɛrɛ ye – halojeniw ni nɛgɛ gɛlɛnw tɛ a la.

A bɛ se ka nɔ bila – a bɛ mɛn ka tɛmɛ gosili ni bɔgɔbɔgɔli kan.

A sabatilen don funteni yeli caman na – a bɛnnen don sigida caman ma.

Saniya ka nɔgɔn – a bɛ se ka yɔrɔ sɔgɔsɔgɔninjɛ ni kemikɛli nɔgɔli kɛlɛ.
 

ABS Edge Banding nafaw:

A bɛnnen don sow jɔli baara minnu bɛ kɛ ni jiri ye walima minnu bɛ sabati.

A lakananen don a jeni walima a jeni waati (fɛn minnu tɛ baga ye).

A bɛ se ka sɛgɛn ka ɲɛ ani ka a gosi.
 
1747794011833

Acrylic Edge Banding (Bandingɛ min bɛ kɛ ni acrylique ye

Acrylic Edge Banding ɲɛmɔgɔba ani a dilannikɛla

Acrylic Edge Banding ka baarakɛcogo:

A bɛ kɛnɛya kosɛbɛ ani a bɛ i n’a fɔ gilasi – a dafalen don ɲɛnajɛko walima bi cogoyaw kama.

Dugukolo ni kulɛri jɛlen – kulɛri bɛ to ɲɛnamaya la ani ka juguya waati tɛmɛnen kɔfɛ.

UV-resistant – a tɛ jɛ walima a tɛ tunun nɔgɔya la.

A bɛ se ka sɔgɔsɔgɔ ani ka sɔgɔsɔgɔ – a bɛ cɛɲi to a la ka mɛn.
 

Nafa minnu bɛ acrylique Edge Banding na:

A bɛ pannew yecogo ɲɛ ni 3D kɛcogo ye min tɛ fɛn tiɲɛ.

A bɛ muɲu kosɛbɛ ani a bɛ mɛn a ɲɛda cogoya la.

A ka ɲi bi kɔnɔna dilancogo cogoyaw ma.
 
1747793440591

Nafa minnu bɛ Edge Banding la


1747794226418

Lɔgɔ suman/Gloss haute/Matte/Metallic Finish Plastique Edge Banding

Lɔgɔ suman Edge Banding:

Lɔgɔ kisɛ dawolo bandi dabɔra walasa ka jiri nafama cogoya ladege. A ka c’a la, a bɛ dilan ni PVC walima ABS ye, a bɛ sɛbɛn ni jiriw ye, wa tuma dɔw la a bɛ kɛ ni sɛbɛnni ye walasa a ka kɛ tiɲɛ ye.
Lɔgɔ cogoya lakika – a bɛ mebɛriw ka cɛɲi nafama bonya.
Patɔrɔn suguya caman – a bɛ bɛn lamini, finimugu, walima melamini panɛri fanba ma.
A bɛ mɛn ani a bɛ se ka wuli – a bɛnnen don dakun kurulenw walima dakun tilennenw ma.
Ladonni dɔgɔyali – a saniya ka nɔgɔn ka tɛmɛ jirisun lakikaw kan.
 

Bandingɛ min bɛ kɛ ni Gloss Edge ye

Bandingɛ min bɛ kɛnɛya kosɛbɛ, o bɛ i n’a fɔ filɛlikɛlan, a ɲɛ bɛ manamana min bɛ mebɛriw kɛ bi cogo la, u bɛ kɛ cogo cɛɲi na. A ka c’a la, a bɛ dilan ni PVC walima acrylique ye ni a ɲɛda jɛlen ye min bɛ lamini walima min bɛ bɔ ɲɔgɔn fɛ a sanfɛla la.
A ɲɛda ka ɲi, a ɲɛ ka bon – a dafalen don bi dilanw kama.
UV-resistant – a bɛ kulɛri ni yeelen mara waati kɔnɔ.
Nɔgɔ ni sɔgɔsɔgɔninjɛ tɛ se ka kɛ – a ka ɲi yɔrɔw la minnu ka kan ka saniya tuma caman.
A bɛ bɛn panɛriw ma minnu ɲɛ ka bon kosɛbɛ – a bɛ ɲɛda cogoya dɔ dilan min tɛ fɛn tiɲɛ, min bɛ kɛnɛya.
 

Mate Edge Banding (Bandingɛ min bɛ kɛ ni bɔgɔdaga ye).

Matte edge banding bɛ ni fini ye min tɛ yeelen bɔ, a bɛ nɔgɔya. O ye sugandili ye min ka di mɔgɔw ye ka ɲɛsin minɛnw dilanni nɔgɔlenw ni cɛɲiw ma. A ka c’a la, a bɛ dilan ni PVC, ABS walima PP fɛnw ye.
A ɲɛda nɔgɔlen, a dɔgɔyalenba – a ka ɲi kosɛbɛ cogoya fitininw walima klasiki cogoyaw la.
A man teli ka bolokɔniw ni nɔgɔw sɔrɔ – a ladonni ka nɔgɔn.
A bɛ yeelen bɔli dɔgɔya – a bɛnnen don baarakɛyɔrɔw ma walima yɔrɔw la minnu ka ɛkran ka gɛlɛn.
Tactile feel ɲuman – surface matte dɔw bɛ soft-touch walima textured.
 

Nɛgɛ fini fini Edge Banding

Nɛgɛ dawolo banding bɛ aluminiyɔmu burusi, nɛgɛ inox walima chrome cogoya ladege. A ka c’a la, o bɔrɔw bɛ dilan ni PVC walima ABS ye, ni papiye walima nɛgɛ filimu ye min lamininen don u sanfɛla la. 
Industriw ni bi cogoya – a bɛ nɛgɛ lakika ladege k’a sɔrɔ a girinya walima a musaka tɛ.
A bɛ mɛn ani a tɛ sɔgɔ – a ka ɲi kosɛbɛ baara kɛli la waati jan kɔnɔ.
A bɛ sɔrɔ warijɛ, sanu, nɛgɛ ani nɛgɛ burusi tonw na
A bɛ ɲagami kosɛbɛ ni galasi, akiriliki ani laminati panɛriw ye
 

Wallis Edge Banding ka  fɛn dilannenw

Wallis ye Bandingɛ feerela ŋana ye 
WALLIS PLASTIC A bɛ fura kelen di Edge Banding suguya bɛɛ ma, an bɛ kiliyan kelen-kelen bɛɛ ka ɲinini kɛrɛnkɛrɛnnenw ɲɛnabɔ ani ka fɛnw bɛrɛbɛn walasa k’u magow ɲɛ.

kɛcogo Edge Banding (Edge Banding)

Edge banding bɛ kɛ kosɛbɛ sigiyɔrɔ, jagokɛyɔrɔ ani sigida minɛn suguya caman na
  • <strong><span style='font-size:22px;'>Etagères (Etajɛriw) bilali</span></strong>

Wallis-Mun ye Plastiki Edge Banding ye

 
Edge banding ye finiko fɛɛrɛ kɔrɔlen ye min bɛ kɛ mebɛri dilanni na walasa ka fɛnw dakunw datugu minnu bɛ kɛnɛ kan i n’a fɔ plywood, MDF (medium-density fiberboard), ani particle board. A tɛ dɔrɔn ka mebɛri yɔrɔw yecogo ɲɛ, nka a bɛ u muɲuli fana ɲɛ ani u ka se ka u kɛlɛ ni ji ye, ka u gosi, ani ka u sɛgɛn don o don. I mana kɛ dumunikɛyɔrɔ kabiniw dilan, biro tabali, finidoncogo, walima feerekɛyɔrɔw, dakunw sirili nafa ka bon walasa ka baarakɛcogo ɲuman ni cɛɲi sɔrɔ.
 
Edge banding bɛ se ka kɛ i n’a fɔ fɛn fitinin dɔ, nka a jɔyɔrɔ ka bon kosɛbɛ mebɛriw bɛɛ lajɛlen ka ɲumanya n’u yecogo la. Ni aw ye edge banding material ni a kɛcogo ɲuman sugandi, o bɛ se ka dɔ fara aw ka fɛn dilannenw nafa kan, u ka muɲuli, ani u ka sugu diyabɔli. I kɛra bololabaarakɛla fitinin ye wo, walima i kɛra bololabaarakɛla ŋana ye wo, ka wari bila dakun bandi fɛɛrɛ ɲumanw na, o nafa ka bon walasa ka mebɛriw dilan minnu bɛ se ka kɛ baarakɛlaw fɛ ani minnu bɛ mɛn.
 
1747794177097
 
 

Plastique Edge Banding ka baarakɛcogo

 
 

Aesthétique Appeal min bɛ bonya

Edge banding bɛ fini saniyalen, nɔgɔlen ani nɔgɔlen di min bɛ bɛn surface decor ma.
A bɛ sɔrɔ kulɛriw, fɛn dilannenw ani cogoya caman na (jirisunw, kulɛri gɛlɛnw, ani finiw minnu bɛ manamana).
 

Lakanali ka bɔ tiɲɛniw na

Aw bɛ panɛriw da sɔgɔlenw datugu walasa ka ji, nɔgɔ ani tiɲɛni bali.
A bɛ dɔ bɔ mebɛriw sɛgɛnni ni u sɔgɔli la, kɛrɛnkɛrɛnnenya la, mɔgɔw bɛ taa yɔrɔ minnu na walima minnu bɛ baara kɛ kosɛbɛ.
 

A ka muɲuli kɛcogo ɲɛna

A bɛ pankurun dakun barikamaw barika bonya ani ka dɔ bɔ sɔgɔsɔgɔninjɛ, tilali walima funu na.
A bɛ mebɛri minnu dilannen don ni jiriw ye minnu dilannen don ni ɛntɛrinɛti ye, olu si janya.
 

Laminiko kɛlɛli

Edge band caman tɛ funteni, kemikɛli ani ji kɛlɛ, u ka ɲi kosɛbɛ dumunikɛyɔrɔw, sanuyasow ani birow la.
 

Fɛn dilanni min musaka ka dɔgɔ

A bɛ a to fɛn dilannikɛlaw ka baara kɛ ni fɛn kolomaw ye minnu sɔngɔ ka nɔgɔn (i n’a fɔ particleboard) k’a sɔrɔ u bɛ se ka ɲɛda cogoya ɲuman sɔrɔ hali bi.
 
1748313575860
 

Plastique Edge Banding (Plastic Edge Banding) kɛcogo

 
Plastiki dawolo bandi bɛ kɛ kosɛbɛ bi minɛnw dilanni na ani sokɔnɔna masirili porozɛw la. O bɔrɔ ninnu bɛ kɛ walasa ka jirisunw dawolow datugu ani k’u lakana i n’a fɔ particule board, MDF, ani plywood, o bɛ kɛ sababu ye ka u ɲɛda kɛ cogo dafalen na ani ka diya u cɛɲi ye. Plastiki dawolo bandi bɛ sɔrɔ fɛn suguya caman na, i n’a fɔ PVC, ABS ani Acrylic, u kelen-kelen bɛɛ ka jogo kɛrɛnkɛrɛnnenw bɛ bɛn sigidaw ni dilancogo magow ma minnu tɛ kelen ye.
 

Biro Mebɛriw

Baarakɛyɔrɔw ni tabali/ Dosiyɛriw ni fɛnmarayɔrɔw/ Lajɛso tabali
Plastiki dakunw bandi bɛ kɛ kosɛbɛ biro kɔnɔfɛnw na i n’a fɔ tabali, kabiniw, yɔrɔw, ani fɛn marayɔrɔw. A:
A bɛ finimugu saniyalen di min bɛ kɛ ni baarakɛla ye.
A bɛ dɔ fara a ka se ka don o don sɛgɛn ni sɛgɛnbaliya kunbɛn.
 

Cuisini kabiniw ani Sanuyaso Vanities

A bɛ se ka ji, waji ani funteni kɛlɛ kosɛbɛ.
Ladonni ni saniya nɔgɔn—kɛrɛnkɛrɛnnenya la, a nafa ka bon yɔrɔw la minnu ɲiginnen don.
 

So kɔnɔ minɛnw

Kabini ni finidoncogo/ Etajɛriw ni gafebonw/ Telewisɔn jɔyɔrɔw ni ɲɛnajɛyɔrɔw/ Cuisini jatebɔlanw ani sanuyaso fɛnw
Lakanali ni nkɔni nɔgɔlenw nɔgɔyali ye.
Yecogo ni dilancogo basigilen ye.
A ka ɲɛnamaya jan kɛ ni mebɛriw lakanani ye ka bɔ tigɛtigɛ ni u bɔli la.
 

Kalan ni baaradaw ka minɛnw

Lakɔlisow la, gafemarayɔrɔw la, laboratuwaraw la, ani kalansow la, plastiki dawolo bandi bɛ kɛ bawo:
A bɛ sɔrɔ kulɛri jɛlenw na, minnu tɛ mɔgɔ tɔɔrɔ, minnu tɛ baga ye (kɛrɛnkɛrɛnnenya la ABS).
A bɛ se ka sɔgɔsɔgɔninjɛ ni sɛgɛnbaliya kɛlɛ, a bɛnnen don sigidaw ma minnu bɛ baara kɛ kosɛbɛ.
A bɛ se ka sigida ni kɛnɛya sariyaw labato so kɔnɔ fiɲɛ hakɛ la.
 

Jago ni feerekɛyɔrɔw ka fɛnw

Display racks and counters/ Reception desks/ Partition panels
Kɛrɛnkɛrɛnnenya la, acrylique edge banding bɛ fini jɛlen di, min bɛ i n’a fɔ gilasi, min dafalen don walasa ka fɛnw jira minnu nafa ka bon maganw na ani ɲɛjiraliw la.

 
1747724938534

Jɛkafɔ taabolo

PVC ABS Acrylic Edge Banding Ɲininkaliw

  • Yala PETG Sheet Film bɛ se ka kɛ kɛnɛma minɛnw ye wa?

    Ɔwɔ, PETG Sheet Film bɛnnen don kɛnɛma minɛnw baara ma. A ka se ka waati cogoyaw kɛlɛ ani ka UV sɔrɔ, o b’a kɛ sugandili ɲuman ye minɛnw kama minnu dilannen don walasa ka kɛnɛyako muɲu. PETG ka muɲuli b’a to kɛnɛmafɛnw bɛ to ka ɲɛ ani u jɔcogo ka ɲi waati jan kɔnɔ.

  • PETG Sheet Film bɛ nafa jumɛnw di mebɛri baarakɛcogo la?

    PETG Sheet Film bɛ nafa caman jira ni a bɛ kɛ mebɛriw kɔnɔ. A ka jɛya danmadɔ bɛ dɔ fara mebɛriw ɲɛda cɛɲi kan, ka kɛ sababu ye ka fɛn dɔ kɛ min bɛ mɔgɔ ɲɛnajɛ ani ka kɛ bi ta ye. Ka fara o kan, PETG ka sɔgɔsɔgɔninjɛ kunbɛnni bɛ a to a ka muɲuli, o b’a to a bɛnnen don mɔgɔw bɛ taa yɔrɔ minnu na kosɛbɛ. Ka fara o kan, o fɛn dilannen bɛ kɛ ni funteni ye nɔgɔya la, o bɛ kɛ sababu ye ka dilancogo gɛlɛnw kɛ ani ka fɛnw kɛ ka kɛɲɛ ni mɔgɔw sago ye mebɛri dilanni na.

  • Yala PETG Sheet Film bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

    Ɔwɔ, PETG Sheet Film bɛ se ka segin ka kɛ fɛn wɛrɛ ye. Segin-ka-bɔ-yɔrɔ minnu bɛ sɔn PET plastiki ma, olu bɛ PETG fana baara. A nafa ka bon ka PETG faranfasi ka bɔ fɛn wɛrɛw la sani a ka kɛ fɛn wɛrɛ ye. O kɛli fɛ, o fɛnw bɛ se ka labɛn kokura ka kɛ fɛn suguya caman ye, o bɛ kɛ sababu ye ka sigida sabati.

  • PETG Sheet Film baarakɛcogo fɔlɔ jumɛnw ye?

    PETG Sheet Film bɛ baarakɛcogo sɔrɔ izini suguya caman na k’a sababu kɛ a ka baarakɛcogo caman ye. Baara minnu bɛ kɛ tuma caman na, olu ye sannikɛyɔrɔ jiralanw ye, taamasiyɛnw, furakɛli minɛnw foroko ani ɲɛda tangalanw. A ni sɛbɛnnikɛlan fɛɛrɛw bɛ bɛn ɲɔgɔn ma ani a dilanni nɔgɔya b’a to a ye sugandili ɲuman ye porozɛw kama minnu bɛ ɲɛnajɛko ni baarakɛcogo bɛɛ wajibiya.

  • PETG Sheet Film ni plastiki sɛbɛn tɔw tɛ kelen ye cogo di?

    PETG Sheet Film bɛ bɔ plastiki sɛbɛn tɔw la k’a sababu kɛ a ka nafaw faralen ye ɲɔgɔn kan cogo kɛrɛnkɛrɛnnen na. PETG tɛ i n’a fɔ laadala PVC walima akiriliki sɛbɛnw, a bɛ jɛya danma di k’a sɔrɔ a ma muɲuli tiɲɛ. A fana bɛ se ka sɔgɔsɔgɔ ka tɛmɛ akiriliki kan, wa a bɛ se ka kɛ ni funteni ye nɔgɔya la, o b’a to a bɛ kɛ sugandili ye min bɛ se ka kɛ fɛn caman na izini suguya caman bolo.

  • Yala PETG Sheet lakananen don mebɛriw kama minnu bɛ tali kɛ dumuni na wa?

    Cuisini countertops : PETG bɛ se ka kɛ ka cuisini countertops jɛlen walima kulɛrilenw dilan dumuni labɛnni bɛ kɛ yɔrɔ minnu na.
     
    Dumunikɛ tabali : Dumunikɛ tabali minnu bɛ ni PETG tabali ye, olu farati tɛ dumunifɛnw bilali la k’a sɔrɔ kɛnɛyako haminanko si tɛ u la.
     
    Baro jatebɔyɔrɔw : So kɔnɔ barokɛyɔrɔw walima jagokɛyɔrɔw kama, PETG ye fɛn ye min bɛnnen don barokɛyɔrɔ jatebɔyɔrɔw ma, minfɛnw ni dumunifɛn misɛnninw bɛ dilan yɔrɔ minnu na.

  • Nafa jumɛnw bɛ baara kɛ ni PETG sɛbɛnw ye minɛnw kɔnɔ?

    U bɛ mɛn: PETG sɛbɛnw bɛ se ka fɛnw gosi kosɛbɛ, wa u tɛ tiɲɛ nɔgɔya la. O b’a to mebɛriw minnu dilannen don ni PETG ye, olu bɛ mɛn kosɛbɛ ani u bɛ mɛn.
     
    Kɛrɛnkɛrɛnnenya la: PETG sɛbɛnw bɛ ɲɛnayeli jɛlen danfaralen di, i n’a fɔ gilasi. O jɛlenya in bɛ mebɛriw cɛɲi bɛɛ lajɛlen bonya, k’a kɛ fɛn ye min bɛ bɛn bi ni bi dilancogo ma.
     
    A dilanni nɔgɔya: PETG sɛbɛnw bɛ se ka tigɛ nɔgɔya la, ka u kɔrɔta, ka u dilan walasa u ka bɛn minɛnw dilanni wajibiyalen suguya caman ma. O bεε b’a to mebɛriw ɲɛnabɔcogo bɛ se ka kɛ ni daɲɛw ye ani ka kɛɲɛ ni mɔgɔw sago ye.

  • PETG sɛbɛn bɛ kɛ cogo di Mebɛriw kɔnɔ?

    PETG sɛbɛnw bɛ baara kɛ mebɛriw kɔnɔ baara suguya caman kama, i n’a fɔ:
     
    Tabali ni jatebɔlanw:
    PETG sɛbɛnw bɛ se ka kɛ ka tabali ni jatebɔlanw dilan minnu bɛ ye walima minnu ɲɛw ye ɲɛgɛnw ye. U ka jɛyaba bɛ bi ɲɛnajɛ ni cɛɲi dɔ fara mebɛriw kan.
     
    Etajɛriw ni jiralanw:
    A ka c’a la, PETG sɛbɛnw bɛ kɛ ka etajɛriw ni jiralanw dilan feerekɛyɔrɔw ni sow kɔnɔ. U fanga n’u ka kɛnɛya b’u kɛ fɛn ɲumanw ye walasa ka fɛnw ni fɛnw jira minnu bɛ lajɛ.

  • PETG sɛbɛn ye mun ye?

    PETG (Polyethylene Terephthalate Glycol) sɛbɛn ye plastiki ye min bɛ se ka kɛ fɛn caman na, min bɛ kɛ ka caya mebɛri dilanni na. A lakodɔnnen don a ka jɛya cogo kɛrɛnkɛrɛnnen na, a ka muɲuli, ani a dilanni nɔgɔya.

Izini Ɲininkaliw

Aw ye ɲɔgɔn sɔrɔ anw fɛ
形状结合, Bamako, Mali
形状结合备份, Bamako, Mali
  • <span style='font-size:26px;'><strong>Wechat (Wechat) ye</strong></span>
  • <strong><span style='font-size:26px;'>Linkedin ye</span></strong>
  • <strong><span style='font-size:26px;'>WhatsApp ka baara</span></strong>

Aw ye aw ka Porozɛ daminɛ an fɛ

An ka Quotation ɲuman sirataama
Shanghai Wallis Technology Co., Ltd ye baarakɛla ŋana ye min bɛ ni izini 7 ye walasa ka Plastiki sɛbɛnw, Plastiki filimu, Karti Base Material, Karti suguya bɛɛ, ani Custom Fabrication Service di Plastiki fɛn dilannenw ma.

Fɛn minnu bɛ dilan

Lien teliyalenw

Ka wele
   +86 13584305752
  No.912 YeCheng sira, Jiading Industri yɔrɔ, Shanghai
© ƝƐNABƆLI ƝƐNABƆLI 2025 SHANGHAI WALLIS TECHNOLOGY CO.,LTD. HAKILINATA BƐƐ BƐ SƆRƆ.