Sanfɛ 15: Gafe dafalen min bɛ tali kɛ polikarbonati dafalenw feereli la

Polikarbonati dacogo ye fɛn ye min bɛ kɛ bi fɛn dilanni na — a bɛ muɲu cogo kɛrɛnkɛrɛnnen di, ka jɛya, ani ka se ka sɛgɛn ni sɛgɛn. K’a ta ID karti lakananenw na ka taa a bila architectural panels ani in-mold electronics (IME) , polikarbonati filimuw ni overlays jɔyɔrɔ ka bon kosɛbɛ fɛnw lakanani, u masirili ani u si janya la.

Polikarbonati (Polycarbonate Overlay) ye mun ye?

Daɲɛw dabɔcogo ani a nafa jɔnjɔnw

Polikarbonati (PC) ye injiniyɛri thermoplastique amorphe ye min lakodɔnnen don ni ninnu ye:

• A bɛ se ka sɔgɔsɔgɔ kosɛbɛ — a fanga ka bon fo siɲɛ 250 ka tɛmɛ gilasi kan.

• Optical clarity — yeelenbɔcogo ɲumanba ye lakanani datugulanw ni jiralanw kama.

• Funteni muɲuni — baarakɛcogo funteni min bɛ to senna fo ka se ~140°C ma.

• Dimensionnel stability — a bɛ kɛlɛ kɛ ni warping ye funteni ni degun kɔrɔ.

Polikarbonati dabɔlenw ye PC sɛbɛnfura finmanw walima filimuw ye minnu bɛ kɛ i n’a fɔ dugukolo lakanani layɛrɛw walima i n’a fɔ layɛrɛ dafalenw laminated products kɔnɔ , kɛrɛnkɛrɛnnenya la ID karti lakananenw na ani izini ja la.

Foromasiw ni jɔli minnu bɛ kɛ tuma caman na

• Filimu monolitiki : Filimu jɛlenw walima tintinw minnu bɛ kɛ ni layini kelen ye.

• Datugulan minnu datugulen don : Yɔrɔ minnu datugulen don kosɛbɛ walima minnu tɛ yeelen bɔ walasa ka sɔgɔsɔgɔ/UV kɛlɛ.

• Filimu nɛgɛma : PC filimu minnu bɛ ni nɛgɛdaga ye min bɛ masiri walima min bɛ baara kɛ.

• Lakanali-dafalenw : Filimu minnu bɛ kɛ ni fɛn caman ye minnu bɛ don a kɔnɔ i n’a fɔ ologramuw.

Polikarbonati (Polycarbonate Overlays) suguyaw

1. Aw ye Lakanalifɛnw jɛlenw kɛ

O filimu jɛlenw bɛ sɛbɛnw lakana ka bɔ sɔgɔsɔgɔninjɛ la, ka UV tiɲɛ, ani ka bɔ kemikɛlifɛnw na. A ka ca a la:

• ID kartiw

• Siginidenw

• Ɛntɛrinɛti kan jiralanw

Laɲini daɲɛ kolomaw : polikarbonati dacogo, polikarbonati dacogo, polikarbonati lakanani filimu.

2. Lakanali & ID kartiw dacogo

A bɛ kɛ ni karti caman dilanni ye:

• Laser-markable surfaces (yɔrɔ minnu bɛ taamasiyɛn kɛ ni laser ye

• Fɛn minnu bɛ ye ka fɛnw tiɲɛ

• Fusion-bonded ka karti cores walasa ka to senna

Laɲini daɲɛ kolomaw: pc karti filimu, pc lamination.

3. Kɛrɛnkɛrɛnnenya la, fɛnw dacogo (Polycarbonate Paper) .

Polikarbonati 'paper' ye PC filimu ye min bɛ se ka sɛgɛsɛgɛ, min bɛ se ka sɛbɛn, min bɛ kɛ lakana sɛbɛn kɛrɛnkɛrɛnnenw na ani izini baarakɛcogo kɛrɛnkɛrɛnnenw na.

Laɲini daɲɛ koloma: papiye polikarbonati.

Baarakɛcogo jɔnjɔnw

ID Cards & Passports lakananenw

Polikarbonati datugulenw bɛ kɛ kɛnɛma lakanani ye gɔfɛrɛnaman ka ID ni pasipɔri caman kɔnɔ.

Nafaw:

• Tamper resistance ka bon ni fusion-laminated ye.

• Laser engraving bɛ se ka ɲɔgɔn sɔrɔ.

• Baarakɛ waati jan (san 10+ ni peeling tɛ).

Daɲɛ kolomaw minnu bɛ Kɛ: pc lamination, pc karti filimu, polikarbonati dacogo.

Baarakɛcogo & Jogoɲumanya Kɔlɔsili

Kɔnɔnafiliw kɛlɛli

Polikarɔbɔnati datugulanw bɛ baara kɛ ka tɛmɛ PVC ni PETG kan, u ka se ka fɛnw tiɲɛ — minnu nafa ka bon kosɛbɛ lakanani datugulanw ni lakana sɛbɛnw na.

Sumaya sabatili

A bɛ cogoya ni jɛya mara yɔrɔw la minnu funteni ka bon (mobili, kɛnɛma).

Abrasion Testing (Sɛgɛsɛgɛli min bɛ kɛ ni sɔgɔsɔgɔninjɛ ye).

PC filimu minnu dilannen don ni gɛlɛn ye, olu bɛ se ka Taber ka sɔgɔsɔgɔninjɛ ba caman muɲu k’a sɔrɔ u ma ye.

Lakanali Kɔrɔbɔli

Ka ɲɛsin ID ɲininiw ma:

• Tamper attempts ka kan ka tiɲɛni yelenw jira.

• Fusion bonds ka kan ka delamination kɛlɛ.

Gafe min bɛ dilancogo ni fɛn ɲɛfɔcogo ɲɛfɔ

Fɛnɲɛnɛma Sugandili

• 30–250 μm ye fɛnw dacogo ye

Surface Finish (Sufɛla Fini).

• Gloss walasa ka jɛya

• Matte/anti-glare ka ɲɛsin jiralanw ma ani kɛnɛma kalanni ma.

Print Compatibilité (Bamako bɛnkan).

• Écran printing, offset ani numérique sɛbɛnni bɛ se ka kɛ ni enki sitɛmu ɲumanw ye.

• IME ta fan fɛ: aw bɛ a lajɛ ni enki minnu bɛ taa ni fɛnw ye, olu bɛ bɛn ɲɔgɔn ma.

Nafaw & ɲɔgɔndanw

Polikarbonati ni PVC ye

• Nafa minnu bɛ a la : A bɛ se ka sɔgɔsɔgɔ ka ɲɛ, a bɛ funteni sabati ka ɲɛ, a bɛ lamini lakana ka ɲɛ.

• Nafa tɛ : Musaka ka bon, a bɛ baarakɛcogo funteni caman de wajibiya.

Polikarbonati ni PETG

• Nafa minnu bɛ a la : A barika ka bon, a bɛ funteni kɛlɛ.

• Nafa tɛ : A tɛ se ka labɛn kosɛbɛ, a baara ka gɛlɛn dɔɔni.

Kuncɛli & Weelekan ka ɲɛsin wale ma

Polikarbonati dacogo ye fura ye min bɛ se ka kɛ fɛn caman na iziniw kama minnu bɛ muɲuli, lakana ani jɛya ɲini. I mago bɛ filimuw la minnu bɛ i tanga ID kartiw ma , metallized finishes for electronics , walima specialty PC laminates for signage , polikarbonati bɛ fanga, baarakɛcogo, ani ɲɛnamaya jan faralen ɲɔgɔn kan , min tɛ se ka suma ni plastiki fanba ye.

I bɛ fɛn dilanbaga dɔ ɲinina min bɛ se ka da i kan wa?

Shanghai Wallis Technology Co., Ltd. , an kɛrɛnkɛrɛnnen don polikarbonati dacogo ɲumanw na, PC lamination filimuw, ani PC fɛnw dilannenw na minnu dilannen don ka kɛɲɛ ni mɔgɔw sago ye.

Aw ye kuma an fɛ bi walasa ka misaliw ɲini fu, fɛɛrɛko kunnafonidilanw, walima ka kɛɲɛ ni aw ka baarakɛminɛn ye.