Views: 4 Author: Site Editor Bɔli waati: 2024-05-24 Bɔyɔrɔ: Yɔrɔ
Bi kartiw bɛ se ka baara kɛ ni kun wɛrɛw ye kosɛbɛ, k’a ta tɔndenw ni kantigiya porogaramu nɔgɔmanw na ka taa a bila RFID sɔrɔli kɔlɔsili la, lotɛli kilisiw sigicogo, baarakɛlaw ka dantigɛli, bolifɛnw, seereyaw lakananenw ani wari saracogo.
Nka, daɲɛ minnu bɛ i n’a fɔ karti plastiki, karti hakilitigi, karti RFID, karti NFC, karti magnɛtiki, karti min bɛ wele ko ID karti ani don karti, olu bɛ karti fan suguya wɛrɛw ɲɛfɔ. Dɔw bɛ fɛn farikoloma ɲɛfɔ, dɔw bɛ fɛɛrɛ tigɛlenw ɲɛfɔ, dɔw bɛ baara laban ɲɛfɔ.
B2B sannikɛlaw ni karti dilannikɛlaw fɛ, o la, baarakɛla ka ɲɛfɔli ka kan ka ɲininkali naani faranfasi: Karti dilannen don ni mun ye? Fɛɛrɛ jumɛnw bɛ sɔrɔ a kɔnɔ? A bɛna sɛbɛn cogo di walima a bɛna kɛ mɔgɔ yɛrɛ ta ye cogo di? A ka kan ka baara jumɛn kɛ?
Wallis ka fɛnw PVC, PETG ani polikarbonati kariti fɛnw , datugulanw, RFID prelam inlays ani kartiw dilannenw ka ɲɛsin karti dilannikɛlaw ma, lakanani jɛkuluw, tilabagaw ani OEM porogaramuw.
| Daɲɛgafe | Misaliw | A bɛ min ɲɛfɔ |
|---|---|---|
| Minɛ | PVC, PET/PETG, PC, fɛn dilannenw, nɛgɛ | A muɲuli, a bɛ funteni kɛlɛ, a sɛbɛnni ani a ka karti-farikolo jɔli |
| Tɛkinolozi | Barcode, QR, bande magnétique, puce de contact, RFID, NFC | Kunnafoni bɛ mara cogo min na, u bɛ kalan cogo min na walima u bɛ lase mɔgɔw ma cogo min na |
| Mɔgɔya kɛcogo | Offset sɛbɛnni, sɛbɛnni numérique, DTC, retransfer, embossing, laser gravure | Jaw, mɔgɔya kunnafoniw ani lakanafɛnw bɛ baara kɛ cogo min na |
| Baarakunda | ID, don, lotɛli kilisi, tɔnden, kantigiya, kado, sara, tɛmɛsira | Karti dafalen dabɔra ka min kɛ |
O kuluw bɛ se ka ɲɔgɔn sɔrɔ. Misali la, baarakɛla ka donsɛbɛn bɛ se ka kɛ PVC karti ye ka kɛɲɛ ni fɛn ye, 13,56 MHz karti hakilitigi min tɛ se ka ɲɔgɔn sɔrɔ fɛɛrɛ fɛ, foto ID sɛbɛnnen min bɛ segin ka bila yɔrɔ wɛrɛ la ka kɛɲɛ ni mɔgɔ yɛrɛ ta ye ani donko kɔlɔsili karti ye baarakɛcogo fɛ.
PVC kartiw bɛ kɛ kosɛbɛ ID kartiw, tɔndenw ka kartiw, kantigiya kartiw, lotɛli kilisi kartiw, don kartiw, kado kartiw ani jagokɛcogo wɛrɛw la minnu ka ca.
PVC bɛ balansi nafama di musaka, dugukolo cogoya, sɛbɛnnikɛcogo ani lamini baarakɛcogo la. PVC min bɛ se ka kɛ karti ye, o bɛ se ka dilan i n’a fɔ core sheet min bɛ se ka sɛbɛn, overlay transparent, overlay magnetic-stripe ani RFID karti jɔcogo dɔ.
PVC sariyalen bɛ to ka diya kɛrɛnkɛrɛnnenya la jagokɛlaw ka seereyaw ma minnu si bɛ mɛn fo ka se waati cɛmancɛ ma, yɔrɔ minnu na, fɛn dilanni ni sɛbɛnni sɔrɔko hakɛ caman nafa ka bon.
PET ni PETG ye kariti fɛnw ye minnu sinsinnen bɛ poliyesitɛri kan, minnu bɛ kɛ ni karti bɛ balansi wɛrɛ de wajibiya a gɛlɛya, a ka funteni kunbɛnni, a lamini kɛcogo ani a muɲuli la ka tɛmɛ PVC kɔrɔlen kan.
PET ni PETG man kan ka jate u yɛrɛma i n’a fɔ fɛn minnu bɛ ɲɔgɔn ta. Kalanso tigitigi, a yɔrɔ min bɛ se ka sɛbɛn, a dacogo ani a laminicogo ka kan ka dafa ka kɛɲɛ ni karti jɔcogo wajibiyalen ye.
Karti minnu bɛ kɛ ɲɔgɔn fɛ, olu bɛ polimɛri layɛrɛw fara ɲɔgɔn kan walasa ka nafaw sɔrɔ minnu bɛ se ka sɔrɔ PVC kɔrɔlen dɔrɔn na. PVC/polyester jɔli bɛ jateminɛ tuma caman na walasa ka seereyaw sɔrɔ minnu bɛ baara kɛ kosɛbɛ walima sɛbɛnni ni lamini kɛcogo minnu bɛ funteni wɛrɛ kɛ.
Polikarbonati walima PC kartiw nafa ka bon kɛrɛnkɛrɛnnenya la walasa ka mɔgɔw dɔn minnu bɛ mɛn ani ka seereyaw porogaramuw kɛ minnu lakanani ka bon.
PC jɔcogo bɛnnenw bɛ se ka polikarbonati caman fara ɲɔgɔn kan ni sɛbɛnni ye, puwɛntiw, antɛniw, lakanafɛnw jɛlenw ani laser-reactive layers. Laser personalisation bɛ se ka fotow, tɔgɔw, nimɔrɔw ani kunnafoni caman wɛrɛw bila karti farikolo kɔnɔ sanni ka i jigi da surface sɛbɛnni dɔrɔn kan.
A ka c’a la, nɛgɛ kartiw bɛ dilan ni nɛgɛ ye min tɛ sɔgɔ, aliminiyɔmu walima nɛgɛ jɔcogo bɛnnen wɛrɛw ni girinya, magali dusukunnata ani yecogo ɲuman nafa ka bon.
Baarakɛcogo minnu bɛ kɛ tuma caman na, olu ye VIP kartiw ye, tɔndenw ka karti ɲumanw, viziti karti ɲumanw, hakilijigin kartiw ani seereyaw minnu bɛ kɛ ni taamasiyɛnw ye minnu ka bon kosɛbɛ.
Nɛgɛ kartiw bɛ se ka kɛ ni laser ja ye, kemikɛli ja, ja sɛbɛnnenw, yɔrɔw burusi, miirili finiw, tigɛcogo ani masiricogo wɛrɛw ka kɛɲɛ ni nɛgɛ ni karti dilanni ye.
Nɛgɛ bɛ se ka arajo-fɛrɛnkan antɛni baarakɛcogo bali, o la nɛgɛ karti min bɛ se ka baara kɛ ni RFID walima NFC ye, o bɛ antɛni ni karti jɔcogo kɛrɛnkɛrɛnnen de wajibiya. Sannikɛlaw man kan k’a miiri ko nɛgɛ karti gansan bɛ se ka RFID inlay standard sɔrɔ dɔrɔn k’a sɔrɔ RF ma labɛn kokura ani k’a sɛgɛsɛgɛ.
| Factor | PVC | PET/PETG | PC | Nɛgɛ |
|---|---|---|---|---|
| Jiginni kɛcogo min bɛ kɛ cogoya la | Jagokɛyɔrɔ karti min bɛ kɛ fɛn bɛɛ ye | Karti lamininen min bɛ se ka muɲu kosɛbɛ walima min kɛrɛnkɛrɛnnen don | Seereyaw lakananen minnu bɛ ɲɛnamaya jan | Karti visuel et tactile premium |
| Musow ka musaka jɔyɔrɔ | Sɔrɔko siratigɛ la | Aplikasi bɛ tali kɛ a la | Baarakɛcogo ɲuman jɔyɔrɔfalen | Premium jɔyɔrɔfalen |
| Funteni kunbɛncogo | Ka bɛrɛbɛn | Sugandili ɲɛnabɔlenw bɛ sɔrɔ | Jamanjan | Fɛn minnu bɛ tali kɛ fɛnw na |
| Laser ka mɔgɔya | PVC standard nafaba tɛ | Kɛrɛnkɛrɛnnenya la, a bɛ tali kɛ kalasi la | Nafaba min bɛ PC laser-reactive la | Laser surface engraving bɛ sɔrɔ |
| RFID ka jὲɲɔgɔnya | Min bɛ deli ka kɛ | A bɛ sɔrɔ ni sigicogo ye min bɛ bɛn ɲɔgɔn ma | A bɛ sɔrɔ smart-card jɔcogo lakananenw na | A bɛ RF dilancogo kɛrɛnkɛrɛnnen de wajibiya |
| Baarakɛcogo minnu bɛ Kɛ cogoya la | ID, kantigiya, lotɛli, kado, sɔrɔli | ID min bɛ mɛn, doncogo ani karti kɛrɛnkɛrɛnnenw | ID lakananen ani seereyaw minnu bɛ mɛn | VIP, membres luxe ani branding premium |
Dɔnniya, don, tɔndenw, lotɛli ani hakili karti caman bɛ baara kɛ ni CR80 / ISO ID-1 cogoya ye , min bɛ se milimɛtɛrɛ 85,60 × 53,98 ma.
A janya dafalen min bɛ milimɛtɛrɛ 0,76 walima milimɛtɛrɛ 30 lamini, o ka ca karti jɔnjɔn caman na. Nka, a janya tigitigi ka kan ka bɛn sɛbɛnnikɛlan, kalanbaga, puce, antɛni, lamini ani baarakɛcogo wajibiyalenw ma.
Karti kɛrɛnkɛrɛnnenw fana bɛ se ka baara kɛ ni hakɛ walima u bonya ye minnu tɛ sariya kɔnɔ, nka masinw ka kan ka sɛgɛsɛgɛ tuma bɛɛ sani u ka kɛ fɛn caman ye.
Karti plastiki jɔnjɔn bɛ se ka baara kɛ pewu kunnafoni sɛbɛnnenw fɛ. Viziti kartiw, tɔndenw ka kartiw, kantigiya kartiw, garanti kartiw ani promotion kartiw bɛ se ka kɛ ko u tɛ ɛntɛrinɛti yɔrɔ si wajibiya fewu.
Barkode dɔ bɛ sɛbɛn karti kan ani a bɛ kalan ni ɲɛnayeli ye. Karti kelen-kelen bɛɛ bɛ se ka kɛ ni barɔdi kelen ye walima kunnafoni caman wɛrɛw ye minnu tɛ kelen ye baarakɛla kelen-kelen bɛɛ bolo.
Barcode kartiw bɛ kɛ tuma caman na kantigiya porogaramuw kama, tɔndenw dɔnni, fɛnmarataw ladɛrɛsiw, tikitiw ani baarakɛminɛnw na, yɔrɔ minnu na dantigɛli min bɛ se ka kalan ni masin ye, o sɔngɔ man gɛlɛn, o bɛ se ka kɛ.
QR codew bɛ se ka karti farikoloma dɔ don site web dɔ la, ni profil ye, ni tɔndenw ka sɛbɛn ye, ni tikiti ye, ni menu numérique ye, ni i tɔgɔ sɛbɛnni ɲɛ ye walima nizɛri nafolo wɛrɛ ye.
QR code yɛrɛ kɔnɔ, arajo-fɛrɛnkan-ɛlektroniki si tɛ yen. O ye sɛbɛnnikɛlan ye min bɛ se ka kalan ɲɛ fɛ.
Karti minnu bɛ ni magɛnni ye, olu bɛ kunnafoni kodɔnlenw mara magɛnni sɛrɛkili dɔ kɔnɔ min sirilen bɛ karti sanfɛla la. U bɛ to ka caya lotɛli kilisiw la, dondaw la kɔrɔlenw na, tɔndenw ka porogaramuw la ani baarakɛminɛn wɛrɛw la minnu bɛ ni magɛnni-sɛrɛkili kalanbagaw sigilen don.
HiCo ni LoCo bɛ tali kɛ magɛnni fanga la. A ka c’a la, HiCo sɛrɛkiliw bɛ magɛnni barikama de wajibiya walasa ka kodɔn ani tuma caman na, u bɛ sugandi seereyaw kama minnu bɛ segin-ka-bɔnye wajibiya. Sɛrɛkili ɲuman ka kan ka sugandi ka kɛɲɛ ni encodeur ni reader system ye min bɛ yen.
Kontakt smart card kɔnɔ, circuit intégré dɔ bɛ yen min sirilen bɛ contact pads yelenw na. Karti ka kan ka don kalanden dɔ kɔnɔ min bɛ se ka baara kɛ ɲɔgɔn fɛ walasa kalanbaga ka se ka ɲɔgɔn sɔrɔ ni puce interface ye.
Kontakt puwɛntiw bɛ se ka kɛ ni hakilijagabɔ walima baarakɛcogo seko ye ka kɛɲɛ ni baarakɛminɛn ye. U lakanani yɛrɛ bɛ Labɛn ni puwɛntiw jɔcogo ye, baarakɛminɛnw porogaramuw, kriptografi ani sistɛmu dilanni.
RFID karti kɔnɔ, puce dɔ bɛ sɔrɔ min sirilen bɛ antenne la. Kunnafoni bɛ ɲɔgɔn falen-falen ni telefɔni ye ni kalankɛlan ye min bɛ se ka baara kɛ ni a ye, k’a sɔrɔ kuran fɛnw tɛ yen minnu bɛ ɲini karti hakilitigi fɛ.
Wallis ka fɛnw RFID prelam inlays minnu kɔnɔ antɛniw ni puwɛntiw bɛ sɔrɔ walasa ka karti lamini ni punch kɛ kɔfɛ.
NFC ye kumaɲɔgɔnya suguya ye min tɛ se ka ɲɔgɔn sɔrɔ yɔrɔ surun na, min bɛ baara kɛ ni 13,56 MHz ye. NFC kartiw bɛ se ka kɛ ka telefɔni seleke naani jɛɲɔgɔnya kɛ, nizɛri kartiw, feereli, doncogo sugandilenw ani baarakɛminɛn wɛrɛw minnu bɛ bɛn ɲɔgɔn ma.
RFID karti 13,56 MHz bɛɛ man kan ka wele a yɛrɛma ko NFC karti. Puce tigitigi, protocol ani smartfon walima kalanbaga bɛnkan wajibiyalen ka kan ka dafa.
Karti min bɛ kɛ ni fɛɛrɛ caman ye, o bɛ se ka baara fila walima caman fara ɲɔgɔn kan, i n’a fɔ LF sɔrɔli ka fara HF smart-card baarakɛcogo kan, RFID ka fara magnetic stripe kan, walima ɲɔgɔndan ni ɲɔgɔnkanu tɛ min na.
O jɔli ninnu nafa ka bon ni jɛkuluw ka kan ka dɛmɛ don kalansira kɔrɔw ni kalanbaga kuraw ma jiginni senfɛ walima ni karti kelen bɛ baara kɛ ni baarakɛminɛn caman ye.
| Frequency Family | Typical Description | Baarakɛcogo minnu bɛ kɛ tuma caman na |
|---|---|---|
| LF – 125 kHz lamini na | RFID min bɛ kɛ ni fɛn ye min bɛ se ka kɛ waati kunkurunnin kɔnɔ | Legacy access control, attendance ani identification |
| HF – 13,56 MHz ye | Smart-card min tɛ se ka ɲɔgɔn sɔrɔ ani NFC-denbaya ka fɛɛrɛ minnu bɛ bɛn ɲɔgɔn ma | Sɔrɔ, kalanso, bolifɛn, danyɔrɔ ani ɲinini caman kartiw |
| UHF ye | RFID min bɛ taa yɔrɔ jan ka kɛɲɛ ni sistɛmu dilanni ye | Mobili doncogo, a jɔyɔrɔ, a ladonni ani a nafolo dɔnni |
Frequency dɔrɔn tɛ baarakɛɲɔgɔnya walima lakana ɲɛfɔ. Sannikɛla ka kan ka puce denbaya tigitigi, kalanbaga modɛli walima karti ɲɛfɔli min bɛ yen, o di tuma o tuma ni bɛnkan nafa ka bon.
Offset sɛbɛnni bɛ kɛ kosɛbɛ kartiw dilanni na jamaba kɔnɔ min bɛ kɛ cɛmancɛ la walasa ka ja jɔlenw sɔrɔ minnu ka ɲi kosɛbɛ i n’a fɔ kɔkannafɛnw, logow, marka kulɛriw ani kartiw ja.
Écran printing bɛ se ka kɛ kulɛri gɛlɛnw na, enki kɛrɛnkɛrɛnnenw, lakana ja ani nɔ wɛrɛw ka kɛɲɛ ni karti substrat ani encre system ye.
Nizɛri baarakɛcogo nafa ka bon kosɛbɛ ni karti kelen-kelen bɛɛ bɛ tɔgɔw, fotow, nimɔrɔw, barɔdi walima QR kode wɛrɛw de wajibiya.
Sɛbɛnni min bɛ kɛ ka ɲɛsin karti ma, o bɛ ja bila ka taa karti sanfɛ. PVC karti sɔgɔlen bɛ kɛ ka caya, hali ni karti ni sɛbɛnnikɛlan bɛnkan tigitigi ka kan ka dafa.
Segin-ka-bɔ-sɛbɛnni-minɛnw bɛ fɔlɔ ka ja dɔ sɛbɛn ka bila cɛmancɛ-sɛbɛnni-filimu dɔ kan, ka tila k’o ja siri karti la. O fɛɛrɛ in bɛ se ka ja caman di, wa a nafa ka bon karti hakilitigiw ma minnu yɔrɔw tɛ kelen ye kosɛbɛ.
Ikomi segin-ka-bɔnye taabolo bɛ funteni don, o la, kariti minɛn ka funteni sabatili ka kan ka jateminɛ ni PVC, composite, PETG walima polikarbonati karti stock sugandili ye.
Embossing bɛ sɛbɛnni kɔrɔtalenw dilan ni masin ye i n’a fɔ tɔgɔw walima nimɔrɔ minnu bɛ karti farikolo la. A bɛ se ka tactile premium effect (tactile premium effect) dilan ani a bɛ baara kɛ hali bi tɔndenw, kadow ani karti ciyɛn dilancogo sugandilenw na.
Embossing man kan ka jate a yɛrɛ la i n’a fɔ fɛɛrɛ min bɛ lakana kosɛbɛ, min bɛ nkalontigɛ kɛlɛ. A ka c’a la, bi lakanasɛbɛnw bɛ lakana fɛɛrɛ caman fara ɲɔgɔn kan farikolo ni ɛntɛrinɛti kan.
Foyi funteni bɛ se ka nɛgɛ logow, sɛbɛnni walima masirifɛnw fara a kan VIP, tɔndenw, kadow ani fɛnw laseli kartiw kama.
Laser-reactive polycarbonate bɛ se ka dɛmɛ don mɔgɔya banbali la karti jɔcogo caman kɔnɔ. Nin fɛɛrɛ in nafa ka bon kosɛbɛ kɛrɛnkɛrɛnnenya la, danyɔrɔsɛbɛnw na minnu bɛ mɛn ani minnu lakanani ka bon.
Identification cartes bɛ kunnafoniw di minnu bɛ ye walima minnu bɛ sɔrɔ ɛntɛrinɛti kan, minnu bɛ kɛ ka seere dɔ ni mɔgɔ dɔ fara ɲɔgɔn kan.
Kunnafoni minnu bɛ sɔrɔ cogoya la, olu bɛ se ka kɛ foto, tɔgɔ, baarakɛla walima kalanden nimɔrɔ, waati dafalen, barɔdi, QR kode walima ɛntɛrinɛti seereyaw ye minnu bɛ don a kɔnɔ.
ID karti fɛnw sugandili bɛ bɔ ɲɛnamaya makɔnɔnen na, mɔgɔ yɛrɛ tacogo, lakana hakɛ ani ni RFID walima smart-card fɛɛrɛ wajibiyalen don.
Dondaw kɔlɔsili kartiw bɛ seereyaw kunnafoniw di kalanden ma min bɛ daaw, daaw, jiginni siraw, alifantaw, bolifɛnw jɔyɔrɔw walima yɔrɔ wɛrɛw kɔlɔsi minnu dagalen don.
Fɛnɲɛnɛmaw bɛ se ka kɛ magnetic stripe, LF proximity, HF contactless smart cards, NFC-compatible systems walima fɛɛrɛ caman ka seereyaw ye.
Baarakɛlaw ka kartiw bɛ se ka yelen dɔnni ni nali, farikolo sɔrɔli, dumunikɛyɔrɔ, sɛbɛnni walima baarakɛyɔrɔ baarakɛcogo wɛrɛw fara ɲɔgɔn kan minnu yamaruyara.
Kanpaɲi kartiw bɛ se ka kalandenw ka danyɔrɔ, sow sɔrɔli, u ka taa, gafemarayɔrɔ, bolifɛn, sɛbɛnni ani baarada kɛrɛnkɛrɛnnenw ka baara wɛrɛw fara ɲɔgɔn kan ka kɛ seere kelen ye.
Lotɛli kilisi kartiw dilannen don walasa ka baara kɛ ni ɛntɛrinɛti dakunw ye minnu bɛ bɛn ɲɔgɔn ma. Magnɛtiki sɛrɛkili ni RFID fɛɛrɛ minnu tɛ ɲɔgɔn sɔrɔ, olu fila bɛɛ bɛ kɛ ka kɛɲɛ ni dakunw ye minnu sigilen don.
Lotɛli minnu bɛ karti kɔrɔw bila u nɔ na, olu ka kan ka dakun dilabaga, karti fɛɛrɛ ani karti ɲɛfɔli sisan di sanni ka komandi kɛ u yecogo dɔrɔn fɛ.
Mɔgɔya kartiw bɛ kɛ kuluw, farikoloɲɛnajɛyɔrɔw, tɔnw, feerekɛlaw ani jɛkulu wɛrɛw fɛ walasa ka tɔndenw dɔn ani ka karti farikolomaw ni tɔndenw ka sɛbɛnw walima nafaw siri ɲɔgɔn na.
Mɔgɔya karti nɔgɔmanw bɛ se ka baara kɛ ni nimɔrɔ sɛbɛnnenw dɔrɔn ye walima barɔdi, k’a sɔrɔ porogaramu premiumw bɛ se ka RFID, NFC, embossing, hot foil walima fɛn wɛrɛw don a kɔnɔ.
Kantigiya kartiw bɛ kiliyanw ni sara porogaramuw cɛsiri. U bɛ se ka baara kɛ ni barɔdi sɛbɛnnenw ye, QR codew, magnɛti sɛrɛkiliw walima fɛɛrɛ minnu tɛ se ka ɲɔgɔn sɔrɔ ka kɛɲɛ ni feerekɛla ka POS ni kiliyanw ɲɛnabɔcogo ye.
Jagokɛlaw ka kado kartiw bɛ se ka baara kɛ ni nimɔrɔ sɛbɛnnenw ye, barɔdi, QR kode, magɛnni sɛrɛkiliw walima fɛɛrɛ wɛrɛw minnu bɛ tali kɛ feerekɛla ka nafa maralen yɔrɔ la.
Sarali nilifɛn karti minnu bɛ baara kɛ ni wari sarali siraba belebelebaw ye, olu ni laseli walima jagokɛlaw ka nilifɛn karti gansanw tɛ kelen ye. U bɛ wari bɔli ni wari saracogo-porogaramu sigicogo yamaruyalen de wajibiya ani fana wari saracogo-karti ɲɛfɔli minnu bɛ sirataama ani lakana wajibiyalenw.
O la sa, karti dilanbaga min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, o man kan ka wari sarali-rezo karti jate i n’a fɔ PVC kado karti poroze sɛbɛnnen dɔrɔn.
Krediti, debiti ani wari sarali karti wɛrɛw ye wariko dantigɛli kɛrɛnkɛrɛnnenw ye minnu bɛ tali kɛ puce, personalisation, security, certification ani issuer requirements ka tɛmɛn jago karti dilanni gansan kan.
Karti hakilitigi minnu tɛ ɲɔgɔn sɔrɔ, olu bɛ baara kɛ kosɛbɛ foroba bolifɛnw ni tikiti feereli la, yɔrɔ minnu na, jago teliya minnu bɛ kɛ ni pompi ye ani baara kɛli ni segin-ka-bɔnye ye min bɛ se ka da a kan.
Ko kɛlenw seereyaw ni taamakɛlaw ka badgew bɛ se ka daminɛ mɔgɔ tɔgɔ sɛbɛnnen nɔgɔmanw na ka taa a bila QR, barɔdi walima RFID kartiw la minnu bɛ tali kɛ mɔgɔ tɔgɔ sɛbɛnni ni donko ɲɛnabɔli siraw la.
Viziti karti minnu bɛ kɛ ni plastiki ye, minnu bɛ yeelen bɔ, minnu bɛ kɛ ni nɛgɛ ye ani minnu bɛ se ka kɛ ni NFC ye, olu bɛ se ka kɛ sababu ye ka fɛn dɔ di min bɛ mɛn walima min bɛ se ka kɛ ɲɔgɔn fɛ ka tɛmɛ papiye viziti karti kɔrɔw kan.
A ka c’a la, lakana kartiw ka kan ka baara kɛ ni lakana layini caman ye minnu bɛ ɲɔgɔn dafa sanni u ka u jigi da finimugu kelen kan.
Holographie overlays bɛ dantigɛlifɛn yetaw di k’a sɔrɔ u bɛ karti ja sɛbɛnnenw lakana ka bɔ u ɲɛda sɔgɔli la.
Ja minnu bɛ ye UV fɛ, olu bɛ se ka sɛgɛsɛgɛli kɛcogo wɛrɛ di min bɛ lajɛ yeelen ultraviolet bɛnnen kɔrɔ.
Sɛbɛn ɲumanw ani lakana kɔkankow ɲɛfɔlenw bɛ se ka kɛ sababu ye ka sɛbɛnni kɛ cogo la min tɛ kɛ tuma bɛɛ, o bɛ se ka kɛ sababu ye ka sɛbɛnw bɔli gɛlɛya ani ka sɛbɛnw sɛgɛsɛgɛli ɲɛnama dɛmɛ.
Laser-reactive PC bɛ se ka mɔgɔ yɛrɛ ka kunnafoniw fara ɲɔgɔn kan karti jɔli kɔnɔ, o b’a to fɛn caman b’a to fɛn caman b’a la ka fɛn caman Changements (Yɛlɛma) kɛ fɛn ye min tɛ kelen ye kosɛbɛ ni surface printing (sɔgɔli sɛbɛncogo kɔrɔ) bilali ye.
Ɛntɛrinɛti seereyaw lakanani bɛ bɔ puwɛnti seko la, protocole, cryptographie dilancogo, key management, encoding ani kalanbaga walima kɔkanna sitɛmu. Karti-farikolo-fɛn barikama dɔrɔn tɛ ɛntɛrinɛti tiɲɛni barikama dilan.
Karti kɔnɔna bɛ jɔcogo janya di ani a ka c’a la, a bɛ ja sɛbɛnnenw ta. PVC, PETG ani PC bɛ fɛnw denbayaw cɛma minnu bɛ kɛ ka karti kɔnɔna jɔ.
Prelam RFID inlay kɔnɔ, antɛni ni puce bɛ bila plastiki layɛrɛw kɔnɔ ka sɔrɔ ka karti laban lamini ani ka punch kɛ.
Datugulan jɛlenw bɛ ja sɛbɛnnenw lakana ani u bɛ se fana ka magɛnni sɛrɛkiliw, olografu fɛnw, fini kɛrɛnkɛrɛnnenw walima karti kɛrɛnkɛrɛnnenw fɛn wɛrɛw don u kɔnɔ.
Karti layɛrɛw bɛ fara ɲɔgɔn kan funteni, degun ani waati kɔlɔsili kɔnɔ. Fɛnɲɛnɛmaw bɛnkan nafa ka bon walasa ka bulonw, delamination, warping, shrinkage ani finiw thickness kɔlɔsi.
Lamined sheets bɛ punch ka kɛ karti kelen-kelenw ye, o kɔfɛ, u bɛ se ka personalisation, encoding, signature panneaux walima finishing baara wɛrɛw sɔrɔ.
A daminɛ ni application ye: ID, dondaw kɔlɔsili, lotɛli kilisi, tɔnden, kantigiya, kado, tɛmɛsira, karti de visite walima baara wɛrɛ.
Aw bɛ PVC, PET/PETG, composite, polycarbonate walima metal sugandi ka kɛɲɛ ni ɲɛnamaya waati makɔnɔnen ye, funteni, sɛbɛnni, lakana ani premium-design wajibiyalenw.
Ni karti bɛ baara kɛ ni sistɛmu ye min bɛ yen, aw bɛ barɔdi skanɛrɛ, magnɛti-stripe kalanbaga, RFID kalanbaga, lotɛli dakun, dondaw kalanbaga walima wari saracogo infɔrɔmasiko dɔn sani aw ka fɛɛrɛ sugandi.
Aw kana 'RFID karti' walima '13.56 MHz karti' dɔrɔn de ɲini ni bɛnkan nafa ka bon. Puce denbaya, hakilijagabɔ, protocol walima seereyaw ɲɛfɔli min bɛ yen, o jira.
Aw k’a dɔn ni kartiw bɛna sɛbɛn izini na, ni u bɛna kɛ nizɛrikan na, ni u bɛna sɛbɛn ni sɛbɛnnikɛlan ye min bɛ taa karti la, ni u bɛna sɛbɛn ni laser ye.
Ologramu, UV ja, mikrotexte, laser personalisation, signature panneau, serial numéro walima dantigɛli wajibiyalen wɛrɛw fɔ yɔrɔ minnu na o bɛ bɛn.
CR80 / ID-1 ka ca, nka a hakɛ dafalen tigitigiw ni a janya ka kan ka bɛn ni sɛbɛnnikɛlan, kalanbaga, karti dilanbaga walima dakun laɲininen ye.
Ko kɛlenw ka seereyaw min bɛ se ka kɛ siɲɛ kelen, lotɛli karti, baarakɛlaw ka badge ani gɔfɛrɛnaman ka ID min bɛ mɛn sen na, o bɛ fɛnw ni muɲuli cogoya wɛrɛw de wajibiya minnu tɛ kelen ye kosɛbɛ.
Karti misaliw ka kan ka kɔrɔbɔ ni sɛbɛnnikɛlan, encodeur, reader, lock, access-control system walima fɛn dilanni ni baarakɛminɛn wɛrɛw ye minnu laɲininen don sani u ka dilan caman na.
Karti hakɛw : a janya, a bonya, a nkɔni janya ani a punch tiɲɛni sɛgɛsɛgɛ.
A janya dafalen : karti girinya ni a muɲuni dafa.
Flatness: aw bɛ karti warpage sɛgɛsɛgɛ lamination kɔfɛ.
Layɛrɛ nɔrɔli : aw bɛ bugunw lajɛ, u bɔli ani u bɔli.
Sɛbɛnni: ka kulɛri, sɛbɛnni, sɛbɛnni ani ja sɛgɛsɛgɛ.
Donanw bɛrɛbɛrɛ : tɔgɔw, nimɔrɔw, fotow, QR codew ani barkodew dafa ka kɛɲɛ ni data file ye.
Magnɛtiki sɛrɛkili : aw bɛ yɔrɔ, a cogoya ani a kodɔn sɛgɛsɛgɛ yɔrɔ minnu na a mago bɛ a la.
Puce jɔyɔrɔ : aw bɛ contact-puce walima RFID-puce jɔyɔrɔ sɛgɛsɛgɛ ka kɛɲɛ ni karti jɔli ye.
Antɛni tɛmɛsira : RFID antɛni dafalen dafa.
RF baarakɛcogo : ka kumaɲɔgɔnya sɛgɛsɛgɛ ni kalanbagaw ye minnu bɛ bɛn ɲɔgɔn ma.
Encoding : ka kunnafoniw porogaramulenw ni ɛntɛrinɛti baarakɛcogo wajibiyalenw sinsin.
Holographie overlay : ka a jɔyɔrɔ ni a yecogo sɛgɛsɛgɛ.
Laser personalisation : ka danfara, jɔyɔrɔ ani kunnafoniw tiɲɛni sɛgɛsɛgɛ yɔrɔ min na a bɛ se ka kɛ.
Surface qualité : aw bɛ sɔgɔsɔgɔninjɛw, nɔgɔw, taamasiɲɛw ani finimugu nafamaw sɛgɛsɛgɛ.
Karti baarakɛcogo: ID, don, tɔnden, lotɛli, kantigiya, kado, tɛmɛsira walima baarakɛminɛn wɛrɛ.
Karti minɛn: PVC, PET/PETG, composite, PC, nɛgɛ walima sample min bɛ yen.
A bonya: CR80 / ID-1 walima a hakɛ ladamulen.
Janya : laɲini dafalen janya ni muɲuli.
Hakɛ : misali, tiɲɛni hakɛ ani jago hakɛ.
Seko ni dɔnko baara: PDF, AI walima seko ni dɔnko baara wɛrɛw.
Sɛbɛnni: offset, écran, numérique, DTC, retransfert walima taabolo wɛrɛ.
Mɔgɔya : tɔgɔ, foto, nimɔrɔ, barɔdi, QR kode, bolonɔbila walima laser ja.
Magnɛtiki sɛrɛkili : HiCo/LoCo ni kodɔn wajibiyalen jira ni o bɛ se ka kɛ.
RFID ka caya: LF, HF walima UHF.
Puce: puce model tigitigi walima a bɔɲɔgɔnko min dagalen don.
Karamɔgɔ : kalanden modɛli, lotɛli dakun walima don-kɔlɔsili-sɛnɛyɔrɔ min na bɛnkan nafa ka bon.
RFID labɛncogo : aw bɛ antɛni walima karti-labɛncogo wajibiyalenw di yɔrɔ minnu na a bɛ se ka kɛ.
Lakanalifɛnw: ologramu, UV, mikrotɛks, laser fɛɛrɛ walima wajibi wɛrɛw.
A laban : a ɲɛ bɛ manamana, a bɛ kɛ fɛn ye min bɛ kɛnɛya, a bɛ kɛ ni nɛnɛ ye, a bɛ kɛ nɛgɛ ye walima a yɔrɔ wɛrɛ.
Nɛgɛ-karti baarakɛcogo : aw bɛ ja, sɛbɛnni, tigɛ, fini ani RFID wajibiyalenw ɲɛfɔ yɔrɔ minnu na o bɛ se ka kɛ.
Foroko : pake kelen-kelen, labɛnni tugu-tugu ɲɔgɔn kɔ walima poroze ka wajibi wɛrɛw.
Wallis bɛ karti-farikolo fɛnw denbaya caman dilan, o b’a to karti dilannikɛlaw bɛ se ka substratw sugandi ka kɛɲɛ ni musaka, sɛbɛnni, muɲuli, lamini ani lakana wajibiyalenw ye.
Karti kɔnɔfɛnw finmanw, kulɛrilenw ani jɛlenw bɛ se ka fara ɲɔgɔn kan ni finimugu bɛnnenw ye walasa ka karti sɛbɛnnenw ni laminiw dilan.
Wallis bɛ RFID prelam inlays di ni puce ni antenne structures embedded ye walasa ka smart-card dilanni kɛ ni contactless ye, LF, HF ani UHF porozɛ ka ɲininiw sen bɛ o la.
Magnetic-stripe overlays ani ɲɛnayeli lakanani wajibiyalen wɛrɛw bɛ se ka baro kɛ ka kɛɲɛ ni karti jɔcogo dafalen ye.
Sannikɛlaw bɛ se ka baro kɛ raw core sheets, overlays, RFID prelam inlays, blank cards walima customized finished-card production kan ka kɛɲɛ n’u ka fɛn dilanni baarakɛcogo ye.
Misaliw b’a to sannikɛlaw bɛ se ka sɛbɛnni, lamini, kulɛri, hakɛ, RF baarakɛcogo, kodeli ani bɛnkan ni karti sɛbɛnnikɛlan walima kalanbaga yɛrɛ sɛgɛsɛgɛ sani u ka jago kɛ.
Kartiw bɛ se ka tila ka kɛɲɛ ni fɛnw ye, fɛɛrɛ kuraw walima baarakɛcogo. Misali minnu bɛ sɔrɔ tuma caman na, olu ye PVC kartiw, PETG kartiw, PC kartiw, nɛgɛ kartiw, magnetic stripe kartiw, smart kartiw, RFID kartiw, NFC kartiw, ID kartiw, don kartiw, tɔndenw ka kartiw, kantigiya kartiw, lotɛli kartiw ani kado kartiw.
PVC bɛ kɛ ka caya jagokɛla ka plastiki kartiw la bawo a bɛ musaka, sɛbɛnnikɛcogo ani karti dilanni baarakɛcogo balansi nafama di.
PVC bɛ kɛ ka caya sɔrɔko karitiw kama minnu bɛ baara kɛ ni fɛn bɛɛ ye, k’a sɔrɔ PETG bɛ se ka funteni, gɛlɛya ani lamini cogoya wɛrɛw di. Fɛn min bɛ kɛ ka ɲɛ, o bɛ bɔ karti dilanni n’a dilanni taabolo la.
Polikarɔbɔnati bɛ karti caman jɔcogo sabatilenw dɛmɛ ani a bɛ se ka laser-reactive personalization layers don a kɔnɔ, o b’a to a nafa ka bon ka ɲɛsin dɔnniyasɛbɛnw ma minnu bɛ mɛn ani minnu lakanani ka bon.
Karti hakilitigi kɔnɔ, kafoda dɔ bɛ yen min bɛ se ka kunnafoniw mara walima ka baara kɛ ni u ye. Karti hakilitigiw bɛ se ka baara kɛ ni farikolo-ɲɛnajɛ-yɔrɔ ye, fɛn min tɛ ɲɔgɔn sɔrɔ walima ni u faralen don ɲɔgɔn kan ka kɛɲɛ ni karti dilanni ye.
RFID karti kɔnɔ, puce ni antɛni bɛ sɔrɔ minnu bɛ kumaɲɔgɔnya kɛ ni arajo-frequence kalanbaga ye min bɛ se ka baara kɛ ni telefɔni ye.
RFID ye arajo-fɛrɛnkan dɔnni fɛɛrɛw suguya caman ye. NFC ye fɛɛrɛ kɛrɛnkɛrɛnnen ye min tɛ se ka ɲɔgɔn sɔrɔ waati kunkurunnin kɔnɔ, min bɛ baara kɛ ni 13,56 MHz ye. RFID karti bɛɛ tɛ NFC karti ye.
Ayi, karti fɛɛrɛ caman minnu tɛ ɲɔgɔn sɔrɔ, olu bɛ baara kɛ ni 13,56 MHz ye. Puce ni protocole bɛnkan ka kan ka dafa sani i ka karti wele min bɛ bɛn NFC ma.
RFID prelam inlay ye karti lamini ye min bɛ kɛ tila-tila, antɛni ni puce bɛ sɔrɔ plastiki kɔnɔ ka sɔrɔ ka sɛbɛnni laban kɛ, ka lamination ani ka karti punching kɛ.
Karti min bɛ ni magɛnni ye, o bɛ kunnafoni kodɔnlenw mara magɛnni sɛrɛkili dɔ kɔnɔ karti sanfɛ, wa a bɛ magɛnni kalanbaga dɔ de wajibiya min bɛ se ka baara kɛ ni a ye.
HiCo ni LoCo bɛ magɛnni fanga hakɛ danfaralenw ɲɛfɔ. HiCo bɛ sugandi tuma caman na kartiw kama minnu bɛ se ka baara kɛ siɲɛ caman, k’a sɔrɔ LoCo bɛ se ka bɛn baarakɛminɛnw ma, kartiw tɛ kodɔn kosɛbɛ yɔrɔ minnu na walima minnu bɛ wuli ka caya. Kalanbaga ni encodeur bɛnkan ka kan ka dafa.
Karti caman bɛ baara kɛ ni CR80 / ISO ID-1 hakɛ ye min bɛ se milimɛtɛrɛ 85,60 × 53,98 ma.
0,76 mm walima 30 mil ɲɔgɔn bɛ sɔrɔ ID-size kartiw la, hali ni fɛɛrɛ kɛrɛnkɛrɛnnenw ni baarakɛcogo bɛ se ka kɛ sababu ye ka jɔli suguya wɛrɛw kɛ.
Sɛbɛnni min bɛ kɛ ka ɲɛsin karti ma, o bɛ ja bila ka taa karti sanfɛ. Segin-ka-bɔ-sɛbɛnni bɛ fɔlɔ ka sɛbɛnni kɛ cɛmancɛ-filimu dɔ kan, o kɔfɛ, a bɛ ja siri karti la, o bɛ se ka dakunw datugucogo ni sɛbɛnni kɛcogo ɲɛ ka tɛmɛn smart-card structures embedded kan.
Awɔ. Karti jɔli minnu bɛ kɛ ni fɛɛrɛ caman ye, olu bɛ se ka RFID inlay ni magnétique stripe fara ɲɔgɔn kan ni bɛnkan ni sistɛmu fila de wajibiyalen don.
Awɔ. Karti fila-fila jɔli bɛ se ka RFID fɛɛrɛ fila fara ɲɔgɔn kan minnu bɛ bɛn ɲɔgɔn ma ni antɛni labɛncogo, puwɛnti jɔyɔrɔw ani a janya dafalen kɛra ka ɲɛ.
U bɛ se, nka nɛgɛ bɛ nɔ bila antɛni kɛcogo la. O la, nɛgɛ karti minnu bɛ se ka NFC kɛ, olu bɛ karti dilancogo kɛrɛnkɛrɛnnen ni RF sɛgɛsɛgɛli de wajibiya sanni ka kɛ nɛgɛdaga jɔnjɔn ye min kɔnɔna bɛ kɛ ni fɛn kɔrɔ ye.
Embossing bɛ se ka tactile personalization fara a kan, nka a man kan ka da a kan i n’a fɔ a ye fɛnba ye min bɛ kɛ ka fɛnw kɛ ka kɛɲɛ ni fɛnw ye minnu bɛ se ka fɛnw kɛ. Lakanali sanfɛsɛbɛnw bɛ lakana fɛɛrɛ caman fara ɲɔgɔn kan farikolo ni ɛntɛrinɛti kan.
Sɔrɔ karti min ka fisa, o ye karti ye min bɛ bɛn kalanbaga sigilen ma ani lakana hakɛ wajibiyalen ma. Sannikɛlaw ka kan ka kalanden, frequency, chip ani credential system dɔn sani u ka fɛn walima karti cogoya sugandi.
Karti ka kan ka bɛn lotɛli-dadon fɛɛrɛ sigilen ma. Sitimɛ minnu bɛ yen, olu bɛ se ka baara kɛ ni RFID kartiw ye minnu bɛ ni magɛnni ye walima minnu tɛ ɲɔgɔn sɔrɔ, o la sannikɛlaw ka kan ka da tugucogo modɛli walima karti misali dɔ di minnu bɛ yen.
Kantigiya porogaramu nɔgɔman dɔ bɛ se ka kɛ ko a mago bɛ barɔdi walima QR kode sɛbɛnnen dɔrɔn de la. Porogaramu minnu bɛ ɲɔgɔn sɔrɔ kosɛbɛ, olu bɛ se ka baara kɛ ni magnetic stripe, RFID walima NFC ye ka kɛɲɛ ni POS ni kiliyanw ɲɛnabɔli infrastructure ye.
Awɔ. Wallis bɛ karti kɔnɔna sɛbɛnw ni u datugulanw di PVC, PETG ani polikarbonati denbayaw kɔnɔ kariti dilanni wajibiyalenw danfaralenw kama.
Awɔ. Wallis bɛ RFID prelam inlays di ni puce ni antenne structures embedded ye LF, HF ani UHF karti porozɛw kama.
Awɔ. Misali kartiw ka kan ka sɛgɛsɛgɛ walasa u bonya, u sɛbɛnni, u lamini, u kodɔn, u ka puce walima u ka antɛni baarakɛcogo ani u ni sɛbɛnnikɛlan yɛrɛ, kalanbaga, lotɛli da tugucogo walima u doncogo kɔlɔsili minɛnw bɛ bɛn.
Karti baarakɛcogo, a kɛcogo, a bonya, a bonya, a hakɛ, a kɛcogo, a sɛbɛnni, a kɛcogo, a kɛcogo, a ka puce walima a magɛnni-sɛrɛ, kalanbaga kunnafoniw, a lakananifɛnw ani a foroko wajibiyalenw di.
Karti sugandicogo nɔgɔman ye k’a daminɛ n’a ka baara wajibiyalen ye. Ni application (application) jɛlen don, sannikɛlaw bɛ se ka fɛn wajibiyalenw dɔn, u ka ɲɛnamaya, u ka sɛbɛnni kɛcogo, u ka puce (puce), u ka antɛni, u bɛ se ka kalanbagaw ka bɛn ɲɔgɔn ma ani u lakanani fɛɛrɛw.
Kantigiya karti sɛbɛnnen min musaka ka dɔgɔ, lotɛli kilisi RFID, tɔndenw ka karti nɛgɛma ɲuman ani polikarbonati ID min bɛ kɛ ni laser ye, olu bɛɛ bɛ se ka kɛ kelen ye, nka u ka fɛnw jɔcogo, u dilanni taabolo ani u ka fɛɛrɛ ɲininiw tɛ kelen ye kosɛbɛ.
Aw ye aw ka karti ɲinini ci Wallis ma, kalanbaga walima sistɛmu min bɛ yen, fɛn wajibiyalenw, puwɛnti fɛɛrɛ, sɛbɛnni kɛcogo, a janya dafalen ani a hakɛ walasa ka baro kɛ karti minɛn bɛnnenw kan, RFID prelam inlays walima karti misaliw dafalenw kan.
