Views: 4 Author: Site Editor Ɣeyiɣi si Wotae: 2024-05-24 Dzɔtsoƒe: Teƒe
Egbegbe kaɖiwo ate ŋu awɔ dɔ vovovowo ŋutɔ, tso hamevinyenye kple nuteƒewɔwɔ ƒe ɖoɖo bɔbɔewo dzi va ɖo RFID ƒe mɔɖeɖe dzi kpɔkpɔ, amedzrodzeƒe ƒe safuiɖoɖowo, dɔwɔlawo ƒe dzesidegbalẽvi, ʋuɖoɖo, ɖaseɖigbalẽ siwo le dedie kple fexexe ƒe dɔbiagbalẽviwo dzi.
Ke hã, nyawo abe plastic card, smart card, RFID card, NFC card, magnetic stripe card, ID card kple access card ɖɔa kaɖi ƒe akpa vovovowo. Ame aɖewo ƒo nu tso nu ŋutɔŋutɔ si wotsɔ de eme ŋu, ame aɖewo ƒo nu tso mɔ̃ɖaŋununya si wotsɔ de eme ŋu, eye bubuwo ƒo nu tso alesi woazãe mlɔeba ŋu.
Eyata le B2B ƒlelawo kple kaɖi wɔlawo gome la, ele be dɔnyala ƒe nɔnɔmetata naɖe nyabiase ene ɖe vovo: Nukae wotsɔ wɔa kaɖia? Mɔ̃ɖaŋununya kawoe le eme? Aleke woatae alo atrɔ asi le eŋu wòasɔ na ame ŋutɔ? Dɔ kae wòle be wòawɔ?
Wallis ƒe nuzazãwo PVC, PETG kple polycarbonate card materials , overlays, RFID prelam inlays kple kaɖi siwo wowɔ ɖe ɖoɖo nu na kaɖi wɔlawo, dedienɔnɔ integrators, mamalawo kple OEM ɖoɖowo.
| Ƒomedodo ƒe | Kpɔɖeŋuwo | Nusi Wòɖe Gɔme |
|---|---|---|
| Nu | PVC, PET / PETG, PC, nu vovovowo, ga | Nusiwo nɔa anyi didina, dzoxɔxɔ ƒe tsitretsitsi, agbalẽtata kple kaɖi-ŋutilã tutu |
| Mɔɖaŋu | Barcode, QR, magnet-ka, kadodo ƒe chip, RFID, NFC | Alesi wodzraa nyatakakawo ɖo, xlẽa wo alo ɖoa wo gbɔe |
| Ame ŋutɔ ƒe nɔnɔme | Offset tata, dijitaal tata, DTC, retransfer, embossing, laser nuŋɔŋlɔ | Alesi wowɔa nɔnɔmetatawo, amenyenye ŋuti nyatakakawo kple dedienɔnɔ ƒe nɔnɔmewo ŋudɔe |
| Wᴐ dᴐ | ID, mɔɖeɖe, amedzrodzeƒe ƒe safui, hamevinyenye, nuteƒewɔwɔ, nunana, fexexe, mɔzɔzɔ | Nusi wotrɔ asi le agbalẽvi si wowɔ vɔ la ŋu be wòawɔ |
Ƒomedodo siawo ate ŋu asɔ kple wo nɔewo. kpɔɖeŋu . Le me
Wozãa PVC gbalẽviwo geɖe hena ID gbalẽviwo, hamevinyenye gbalẽviwo, nuteƒewɔwɔ gbalẽviwo, amedzrodzeƒe ƒe safuigbalẽviwo, mɔɖeɖegbalẽviwo, nunana gbalẽviwo kple asitsatsa ƒe dɔwɔnu bubu siwo ƒe agbɔsɔsɔme sɔ gbɔ.
PVC naa gazazã, anyigba ƒe nyonyome, agbalẽtata kple lamination ƒe dɔwɔwɔ ƒe dadasɔ si ŋu viɖe le. Woate ŋu ana PVC si ƒe dzeside le kaɖi me abe agbalẽ vevi si woate ŋu ata, nutsyɔnu si me kɔ, nutsyɔnu si me magnet-stripe le kple RFID kaɖi ƒe wɔwɔme ƒe akpa aɖe ene.
PVC si wozãna ɖaa gakpɔtɔ nye nusi dzea ame ŋu vevietɔ na asitsatsa ƒe ɖaseɖigbalẽ siwo nɔa anyi kpuie va ɖo titina le afisiwo ewɔwɔ ƒe agbɔsɔsɔ gã kple agbalẽtata ƒe ganyawo le vevie le.
PET kple PETG nye polyester-siwo wotu ɖe kaɖi nu siwo wozãna ne kaɖia hiã na dadasɔ si to vovo le sesẽme, dzoxɔxɔ ƒe tsitretsitsi, lamination nuwɔna kple anyinɔnɔ didi tso PVC dzɔdzɔe gbɔ.
Mele be woabu PET kple PETG le wo ɖokui si be wonye nusiwo sɔ o. Ele be woaɖo kpe dzeside tututu, anyigba si woate ŋu ata, nutsyɔnu kple lamination ƒe ɖoɖoa dzi le kaɖi ƒe wɔwɔme si hiã nu.
Kpekpeɖeŋugbalẽvi siwo wotsɔ ƒo ƒui ƒoa polymer ƒe ƒuƒoƒo nu ƒu be woakpɔ viɖe siwo ɖewohĩ womate ŋu akpɔ tso PVC si wozãna ɖaa ɖeɖeko me o. Wodaa PVC/polyester xɔtutuwo kpɔna enuenu hena ɖaseɖigbalẽ siwo wozãna ŋutɔ alo agbalẽtata kple lamination ƒe ɖoɖo siwo me dzoxɔxɔ bubuwo le hã.
Polycarbonate alo PC-kaɖiwo le vevie ŋutɔ na dzesideŋkɔ siwo nɔa anyi didi kple ɖaseɖigbalẽ ƒe ɖoɖo siwo le dedie wu.
PC xɔtuɖoɖo siwo sɔ ate ŋu aƒo polycarbonate ƒuƒoƒo geɖe nu ƒu kple agbalẽtata, chips, antennas, dedienɔnɔ ƒe nɔnɔme siwo me kɔ kple laser-reactive ƒuƒoƒo. Laser ƒe ame ŋutɔ ƒe tɔtrɔ ate ŋu atsɔ fotowo, ŋkɔwo, xexlẽdzesiwo kple nyatakaka bubu siwo trɔna ade kaɖia ƒe ŋutilã me tsɔ wu be woaɖo ŋu ɖe anyigbatata ɖeɖeko ŋu.
Zi geɖe la, wowɔa gagbalẽviwo tso gakpo si mexɔ dzo o, aluminum alo ga xɔtuɖoɖo bubu siwo sɔ me ne kpekpeme, asikaka ame ŋu ƒe seselelãme kple nukpɔkpɔ ƒe ɖeɖefia nyuitɔ le vevie.
Dɔdamɔnu siwo wozãna zi geɖee nye VIP kaɖiwo, hamevinyenye ƒe agbalẽvi nyuitɔwo, asitsagbalẽvi dzeaniwo, ŋkuɖodzigbalẽviwo kple ɖaseɖigbalẽ siwo ƒe ŋkɔ deŋgɔ.
Gagbalẽviwo ate ŋu anye laser-kpa, atikewo ƒe nuŋɔŋlɔ, nɔnɔmetata siwo wota, nusiwo wotsɔ brɔs, ahuhɔ̃e ƒe nuwuwu, nɔnɔmetata siwo wotso kple atsyɔ̃ɖoɖo ƒe mɔnu bubuwo le ga kple kaɖi ƒe nɔnɔme nu.
Ga ate ŋu ado kplamatse radio-frequency antenna ƒe dɔwɔwɔ, eyata ga kaɖi si ŋu RFID alo NFC le hiã antenna kple kaɖi ƒe wɔwɔme si ŋu wotrɔ asi le etɔxɛe. Mele be nuƒlelawo nasusui be gagbalẽvi dzro aɖe ate ŋu axɔ RFID ƒe nutrenu si wozãna ɖaa ko RF ƒe nɔnɔme yeye kple dodokpɔ manɔmee o.
| Factor | PVC | PET / PETG | PC | Ga |
|---|---|---|---|---|
| Ðoƒe Siwo Woɖona Ðe Ðokuisi Siwo Wozãna | Asitsatsa ƒe agbalẽvi si wozãna na nusianu | Kpekpeɖeŋugbalẽvi si nɔa anyi didina wu alo esi wotsɔ laminated tɔxɛ aɖe wɔe | Agbenɔƒe didi ƒe ɖaseɖigbalẽ si le dedie | Premium nukpɔkpɔ kple asikaka agbalẽvi |
| Gazazã ƒe Nɔnɔme | Ganyawo gome | Dɔbiagbalẽvi si dzi woanɔ te ɖo | Ðoƒe si wɔa dɔ nyuie wu | Premium ƒe ɖoƒe si woɖo |
| Dzoxɔxɔ ƒe Tsitretsitsi | Le ve dome | Tiatia siwo nyo wu siwo li | Kɔ | Nusiwo dzi woanɔ te ɖo |
| Laser ƒe Ame ŋutɔ ƒe Nɔnɔmewɔwɔ | Menye viɖe vevitɔ si le PVC si wozãna ɖaa ŋu o | Dzeside tɔxɛ si dzi woanɔ te ɖo | Viɖe gã si le laser-reactive PC ŋu | Laser ƒe anyigbadzinuŋɔŋlɔ li |
| RFID ƒe Ðekawɔwɔ | Nu bɔbɔ | Woate ŋu akpɔe kple xɔtuɖoɖo si sɔ | Woate ŋu akpɔe le smart-card ƒe xɔtuɖoɖo siwo le dedie me | Ebia be woawɔ RF ƒe ɖoɖo tɔxɛ aɖe |
| Dɔwɔwɔ Siwo Wozãna Zi geɖe | ID, nuteƒewɔwɔ, amedzrodzeƒe, nunana, mɔɖeɖe | ID, mɔɖeɖe kple agbalẽvi tɔxɛ siwo nɔa anyi didina | ID kple agbenɔƒe didi ƒe ɖaseɖigbalẽ siwo le dedie | VIP, atsyɔ̃ɖoɖo ƒe hamevinyenye kple premium branding |
Dzesidede, mɔɖeɖe, hamevinyenye, amedzrodzeƒe kple smart card geɖe zãa CR80 / ISO ID-1 ƒe nɔnɔme si wozãna ɖaa , si ade 85.60 × 53.98 mm.
Nusi ƒe titrime si wowu enu anɔ abe milimeta 0.76 alo milimeta 30 ene bɔ ɖe agbalẽvi geɖe siwo wozãna ɖaa me. Gake ele be eƒe titrime tututu nasɔ kple agbalẽtamɔ̃, nuxlẽla, chip, antenna, laminate kple dɔwɔwɔ ƒe nudidiwo.
Kpekpeɖeŋugbalẽvi tɔxɛwo hã ate ŋu azã woƒe didime alo woƒe titrime siwo mele ɖoɖo nu o, gake ele be woakpɔe ɖa be mɔ̃a sɔ ɣesiaɣi hafi woawɔ wo le agbɔsɔsɔ gã me.
Plastik-kaɖi vevi ate ŋu awɔ dɔ bliboe to nyatakaka siwo wota dzi. Dɔwɔgbalẽviwo, hamevinyenye ƒe agbalẽviwo, nuteƒewɔwɔgbalẽviwo, mɔɖegbalẽgbalẽviwo kple boblododogbalẽviwo ate ŋu ahiã be woazã elektrɔnikmɔ̃wo kura o.
Wotaa barcode ɖe kaɖia dzi eye woxlẽnɛ to ŋkume. Barcode alo nyatakaka siwo trɔna siwo le etɔxɛ na ezãla ɖekaɖeka aɖe ate ŋu anɔ kaɖi ɖesiaɖe me.
Wozãa barcode cards zi geɖe na nuteƒewɔwɔ ƒe ɖoɖowo, hameviwo ƒe dzesidegbalẽviwo, nudzraɖoƒewo ƒe kadodowo, tikitiwo nana kple dɔwɔɖoɖo siwo me dzesidegbalẽvi si mɔ̃ ate ŋu axlẽ si mexɔ asi o sɔ gbɔ le.
QR-kɔdawo ate ŋu atsɔ kaɖi ŋutɔŋutɔ aƒo ƒu ɖe nyatakakadzraɖoƒe, ame ƒe nɔnɔmetata, hamevinyenye ŋuti nuŋlɔɖi, tikiti, dijitaal nuɖuɖu, ŋkɔ ŋɔŋlɔ ƒe axa alo dijitaal dɔwɔnu bubu aɖe ŋu.
Radio-frequency elektrɔnikmɔ̃ aɖeke mele QR-kɔda la ŋutɔ me o. Enye nusi wota si woate ŋu axlẽ to ŋkume.
Magnetic stripe cards dzraa nyatakaka siwo woŋlɔ ɖe kɔpi me ɖo ɖe magnet stripe si wotsɔ bla ɖe kaɖia ƒe anyime la me. Wogakpɔtɔ bɔ ɖe amedzrodzeƒewo ƒe safuiɖoɖowo, domenyinu ƒe mɔɖeɖe ƒe ɖoɖowo, hameviwo ƒe ɖoɖowo kple dɔwɔnu bubu siwo me woda magnet-stripe xlẽmɔ̃wo ɖe eme.
HiCo kple LoCo fia magnet ƒe amedzizizi. Zi geɖe la, HiCo fliwo hiã magnet-ŋusẽ si sesẽ wu hafi woate ŋu awɔ kɔpi eye zi geɖe la, wotiaa wo na ɖaseɖigbalẽ siwo hiã be woazã wo enuenu. Ele be woatia fli nyuitɔ le encoder kple reader system si li nu.
Nutome sue aɖe si wotsɔ do ka kple kadodo ƒe agbalẽvi siwo woate ŋu akpɔ la le kadodo ƒe smart card me. Ele be woatsɔ kaɖia ade nuxlẽla si sɔ me ale be nuxlẽla la nate ɖe chip ƒe ŋgɔdonya ŋu.
Memory alo dɔwɔwɔ ƒe ŋutete ate ŋu anɔ contact chips me le dɔwɔnua nu. Woƒe dedienɔnɔ ŋutɔŋutɔ nɔa te ɖe chip architecture, application software, cryptography kple system design dzi.
RFID kaɖi me. Chip aɖe si wotsɔ do ka kple antenna le Woɖɔlia nyatakakawo to kaƒomɔ̃ dzi kple nuxlẽla si sɔ kple elektrikŋusẽ ƒe kadodo siwo hiã le kadodo ƒe smart card me manɔmee.
Wallis ƒe nuzazãwo RFID prelam inlays siwo me antenna kple chips le hena kaɖi lamination kple punching emegbe.
NFC nye kadodo si me kadodo mele o si le didiƒe kpui aɖe si wɔa dɔ le 13.56 MHz dzi. Woateŋu azã NFC kaɖiwo na smartphone ƒe kadodo, dijitaal dɔwɔgbalẽviwo, asitsatsa, mɔɖeɖe ƒe ɖoɖo tiatia aɖewo kple dɔwɔnu bubu siwo sɔ.
Menye 13.56 MHz RFID kaɖi ɖesiaɖee wòle be woayɔ le eɖokui si be NFC kaɖi o. Ele be woaɖo kpe chip, protocol kple smartphone alo nuxlẽla ƒe ɖekawɔwɔ si hiã dzi.
Mɔ̃ɖaŋununya geɖe ƒe kaɖi ate ŋu aƒo dɔ eve alo esi wu nenema nu ƒu, abe LF ƒe mɔɖeɖe kpe ɖe HF smart-card ƒe dɔwɔwɔ ŋu, RFID kpe ɖe magnetic stripe ŋu, alo kadodo kple kadodomanɔmee ƒe ƒomedodowo ene.
Xɔtuɖoɖo siawo ɖea vi ne ele be habɔbɔwo nado alɔ domenyinu kple nuxlẽla yeyewo le ʋuʋu me alo ne kaɖi ɖeka subɔ dɔ geɖe.
| Enuenu Ƒomea | Numeɖeɖe Gbãtɔ | Dɔwɔwɔ Siwo Bɔ |
|---|---|---|
| LF – anɔ abe 125 kHz ene | RFID si ƒe ɣeyiɣi kpui aɖe ƒe ɣeyiɣi kpui aɖe | Domenyinu ƒe mɔɖeɖe dzikpɔkpɔ, vava kple dzesidede |
| HF – 13.56 MHz ƒe ŋusẽ | Smart-card si ŋu kadodo mele o kple NFC-ƒomea ƒe mɔ̃ɖaŋununya siwo sɔ | Mɔɖeɖe, sukuxɔ, ʋuɖoɖo, dzesidegbalẽvi kple dɔbiagbalẽvi geɖe |
| UHF | RFID si didi wu le ɖoɖoa ƒe nɔnɔme nu | Ʋuwo ƒe yiyi, ʋutɔɖoƒe, nuwo ɖoɖoɖa kple nunɔamesiwo ƒe dzesidede |
Frequency ɖeɖe meɖea dɔwɔwɔ aduadu alo dedienɔnɔ gɔme o. Ele be nuƒlela natsɔ chip ƒomea tututu, nuxlẽla ƒe kpɔɖeŋu alo kaɖi ƒe nufiame si li xoxo la ana ɣesiaɣi si wòasɔ ɖe wo nɔewo nu le vevie ŋutɔ.
Wozãa offset tata geɖe le centralized mass card wɔwɔ me na static nɔnɔmetata deŋgɔwo abe megbenyawo, dzesiwo, adzɔnu ƒe amadedewo kple kaɖi ƒe nutatawo.
Woateŋu azã screen printing na amadede sesẽwo, ink tɔxɛwo, dedienɔnɔ ƒe nɔnɔmetatawo kple ŋusẽkpɔɖeamedzi bubuwo le card substrate kple ink system nu.
Digitál dɔwɔwɔwo ɖea vi ŋutɔ ne agbalẽvi ɖesiaɖe hiã ŋkɔ, foto, xexlẽdzesi, barcode alo QR code vovovowo.
Agbalẽtata tẽ ɖe kaɖi dzi tsɔa nɔnɔmetata la yia kaɖia dzi tẽ. Wozãa PVC kaɖi si le gbadzaa zi geɖe, togbɔ be ele be woaɖo kpe kaɖia kple agbalẽtamɔ̃a ƒe ɖekawɔwɔ tututu dzi hã.
Agbalẽtamɔ̃ siwo trɔa asi le nu ŋu la taa nɔnɔmetata aɖe ɖe film si wotsɔna tsɔa nu yia domedome la dzi gbã eye emegbe woblaa nɔnɔmetata ma ɖe kaɖia ŋu. Mɔnu sia ate ŋu ana nɔnɔmetata siwo de ŋgɔ wu eye wòɖea vi na smart card siwo ƒe akpawo mewɔ ɖeka tututu o.
Esi wònye be retransfer processes hea dzoxɔxɔ vɛ ta la, ele be woabu dzoxɔxɔ ƒe liƒo si le card material ŋu ne wole PVC, composite, PETG alo polycarbonate card stock tiam.
Embossing to mɔ̃ dzi wɔa ŋɔŋlɔdzesi siwo wodo ɖe dzi abe ŋkɔwo alo xexlẽdzesiwo ene le kaɖia ƒe ŋutilã me. Ate ŋu awɔ tactile premium effect eye wogazãnɛ le hamevi tiatia, nunana kple domenyinu kaɖi ƒe nɔnɔmewo me.
Mele be woabu embossing le eɖokui si be enye mɔ̃ɖaŋununya si le dedie ŋutɔ si tsia aʋatsokaka nu o. Zi geɖe la, egbegbe ɖaseɖigbalẽ siwo le dedie la ƒoa dedienɔnɔ ŋuti nu geɖe siwo wozãna le ŋutilã me kple esiwo wozãna le kɔmpiuta dzi nu ƒu.
Hot foil ateŋu atsɔ ga ƒe dzesiwo, nuŋɔŋlɔ alo atsyɔ̃ɖoɖo ƒe nɔnɔmewo akpe ɖe VIP, hamevinyenye, nunana kple boblododo gbalẽviwo ŋu.
Laser-reactive polycarbonate ate ŋu ado alɔ ame ŋutɔ ƒe nɔnɔmewɔwɔ tegbee le multilayer kaɖi ƒe wɔwɔme me. Mɔ̃ɖaŋununya sia le vevie ŋutɔ na dzesidegbalẽvi siwo nɔa anyi didi eye wole dedie wu.
Dzesidegbalẽviwo naa nyatakaka siwo wokpɔna alo elektrɔnikmɔ̃ siwo wozãna tsɔ doa ka kple ɖaseɖigbalẽ aɖe kple ame aɖe.
Nyatakaka siwo wozãna zi geɖe ate ŋu anye foto, ŋkɔ, dɔwɔla alo sukuvi ƒe xexlẽdzesi, ŋkeke si dzi wòawu enu, barcode, QR code alo elektrɔnik ɖaseɖigbalẽ si wotsɔ de eme.
ID card ƒe nuzazãwo tiatia nɔ te ɖe agbenɔƒe si wokpɔ mɔ na, ame ŋutɔ ƒe tɔtrɔ ƒe ɖoɖo, dedienɔnɔ ƒe seƒe kple nenye be RFID alo smart-card mɔ̃ɖaŋununya hiã dzi.
Mɔnukpɔkpɔ ƒe agbalẽviwo tsɔa ɖaseɖigbalẽwo naa nuxlẽla si kpɔa ʋɔtruwo, agbowo, ʋuƒo siwo trɔna, ʋufɔtiwo, ʋutɔɖoƒewo alo teƒe bubu siwo ŋu woxe mɔ ɖo dzi.
Mɔ̃ɖaŋununya ate ŋu anye magnetic stripe, LF proximity, HF contactless smart cards, NFC-compatible systems alo mɔ̃ɖaŋununya geɖe ƒe ɖaseɖigbalẽwo.
Dɔwɔlawo ƒe agbalẽviwo ate ŋu atsɔ dzesidenu siwo wokpɔna kple vava, mɔɖeɖe ŋutɔŋutɔ, nuɖuɖudzraƒe, agbalẽtata alo dɔwɔƒe ƒe dɔbiagbalẽvi bubu siwo ŋu woɖe mɔ ɖo la aƒo ƒui.
Sukuxɔ me gbalẽviwo ateŋu aƒo sukuviwo ƒe dzesidegbalẽvi, xɔwo me yiyi, vava, agbalẽdzraɖoƒe, ʋuɖoɖo, agbalẽtata kple dɔwɔƒe tɔxɛ ƒe dɔwɔna bubuwo nu ƒu ɖe ɖaseɖigbalẽ ɖeka me.
Wotrɔ asi le amedzrodzeƒea ƒe safuigbalẽviwo ŋu be woawɔ dɔ kple elektrɔnik mɔ̃ siwo sɔ. Wozãa magnet stripe kple contactless RFID mɔ̃ɖaŋununya siaa le gaxɔ siwo woda ɖe eme nu.
Ele be amedzrodzeƒe siwo ɖɔlia kaɖi siwo li xoxo la nana gaƒoɖokuiwɔƒea, kaɖi ƒe mɔ̃ɖaŋununya kple kaɖi ƒe nyatakaka si li fifia tsɔ wu be woabia nu le dzedzeme ko nu.
Habɔbɔwo, kamedefefewɔƒewo, habɔbɔwo, nudzralawo kple habɔbɔ bubuwo zãa hamevinyenye ƒe agbalẽviwo tsɔ dea dzesi hameviwo eye wotsɔa hamevinyenye ƒe agbalẽvi ŋutɔŋutɔwo doa ka kple hamevinyenye ŋuti nuŋlɔɖiwo alo viɖewo.
Xexlẽdzesi alo barcode siwo wota koe ate ŋu azã hamevinyenye ƒe agbalẽvi bɔbɔewo, evɔ ɖoɖowɔɖi nyuitɔwo ya ate ŋu ade RFID, NFC, embossing, hot foil alo nu bubuwo eme.
Nuteƒewɔwɔgbalẽviwo doa ka kple asisiwo kple teƒeɖoɖo ƒe ɖoɖowo. Woate ŋu azã barcode siwo wota, QR code, magnetic stripes alo mɔ̃ɖaŋununya si me kadodo mele o le nudzrala la ƒe POS kple asisiwo dzikpɔkpɔ ƒe ɖoɖoa nu.
Asitsalawo ƒe nunanagbalẽviwo ate ŋu azã xexlẽdzesi siwo wota, barcode, QR code, magnetic stripes alo mɔ̃ɖaŋununya bubu siwo do ƒome kple nudzrala la ƒe asixɔxɔ si wodzra ɖo ƒe mɔnu.
Fexexe ƒe nunana gbalẽvi siwo le ʋuʋu ɖi siwo wɔa dɔ to fexexe ƒe mɔnu gãwo dzi to vovo na boblododo alo asitsalawo ƒe nunana gbalẽvi dzrowo. Wobia be woawɔ ɖoɖo ɖe gadodo kple fexexe ƒe ɖoɖowɔɖi si ŋu woɖe mɔ ɖo kpakple fexexegbalẽvi ƒe nɔnɔme siwo sɔ kple dedienɔnɔ ƒe nudidiwo ŋu.
Eyata mele be agbalẽvi si wowɔ ɖe ɖoɖo nu nabu fexexe ƒe kaɖi be enye PVC nunana gbalẽvi si wota ƒe dɔ ko o.
Gaxɔgbalẽviwo, gaxɔgbalẽviwo kple fexexe ƒe agbalẽvi bubuwo nye ganyawo ŋuti ɖaseɖigbalẽ tɔxɛ siwo me chip, ame ŋutɔ ƒe tɔtrɔ, dedienɔnɔ, ɖaseɖigbalẽ kple fexexe ƒe nudidiwo le wu asitsatsa ƒe kaɖi dzro wɔwɔ.
Wozãa smart card siwo ŋu kadodo mele o geɖe le dutoƒoʋuɖoɖo kple tikitiwo xɔxɔ me le afisiwo wòhiã be woawɔ asitsadɔ kabakaba siwo wotu ɖe pɔmpi dzi kple wo zazã enuenu si ŋu kakaɖedzi le.
Nudzɔdzɔ ƒe ɖaseɖigbalẽwo kple amedzrowo ƒe akɔtagbalẽviwo ate ŋu atso dzesidegbalẽvi bɔbɔe siwo wota dzi va ɖo QR, barcode alo RFID-dɔdamɔnu siwo do ƒome kple ŋkɔ ŋɔŋlɔ kple gege ɖe eme ƒe ɖoɖowo dzi.
Plastik, nusiwo me kɔ, ga kple NFC-siwo ŋu dɔwɔgbalẽviwo ate ŋu ana dɔwɔgbalẽvi siwo nɔa anyi didina alo esiwo wɔa dɔ aduadu wu pepa dzi dɔwɔgbalẽvi siwo wozãna ɖaa.
Zi geɖe la, ele be dedienɔnɔgbalẽviwo nazã dedienɔnɔ ƒe akpa vovovo siwo kpe ɖe wo nɔewo ŋu tsɔ wu be woaɖo ŋu ɖe atsyɔ̃ɖonu ɖeka ŋu.
Holographic overlays naa kpeɖodzinu siwo woate ŋu akpɔ esime wole kaɖi ƒe nɔnɔmetata siwo wota ta kpɔm tso woƒe gowo ƒe vuvu me.
Nɔnɔmetata siwo woate ŋu akpɔ kple UV ate ŋu ana woakpɔ nu bubu aɖe si woatsɔ alé ŋku ɖe nu ŋu si wokpɔna le keklẽ si sɔ si woyɔna be ultraviolet me.
Nuŋɔŋlɔ nyuiwo kple dedienɔnɔ ŋuti nyatakaka tsitotsito ate ŋu ana be egbugbɔgaŋlɔ le vome nasesẽ wu eye wòado alɔ nuŋlɔɖiwo me toto kple ŋku.
Laser-reactive PC ate ŋu atsɔ nyatakaka siwo wowɔ na ame ŋutɔ awɔ ɖekae le kaɖia ƒe wɔwɔme me, si ana tɔtrɔwɔwɔ nato vovo kura tso agbalẽtata si wozãna le anyigba dzi ɖɔliɖɔli gbɔ.
Elektrɔnik ɖaseɖigbalẽwo ƒe dedienɔnɔ nɔ te ɖe chip ƒe ŋutetewo, ɖoɖowɔɖi, nya ɣaɣlawo ƒe ɖoɖowɔwɔ, safuiwo dzikpɔkpɔ, encoding kple nuxlẽla alo megbeɖoɖoa dzi. Nusi wotsɔ wɔa kaɖi ƒe ŋutilã si sesẽ wu ɖeɖe mewɔa elektrɔnikmɔ̃wo dzi kpeɖodzi si sẽ wu o.
Kpekpeɖeŋugbalẽvia ƒe nuto naa xɔa ƒe titrime eye zi geɖe la, nɔnɔmetata siwo wota la tsɔa wo. PVC, PETG kple PC le nuwo ƒe ƒome siwo wozãna hena card core tutu dome.
Prelam RFID inlay me antenna kple chip si woda ɖe plastic layers me hafi card lamination mamlɛtɔ kple punching le eme.
Nusiwo wotsɔ blaa nu siwo me kɔ la kpɔa nɔnɔmetata siwo wota ta eye woate ŋu ade magnet-ka, holographic-nu, nu tɔxɛ siwo wotsɔ blaa nu alo nu bubu siwo ku ɖe kaɖi koŋ ŋu hã eme.
Woƒoa kaɖi ƒe ƒuƒoƒo nu ƒu le dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si dzi wokpɔna te. Nuwo ƒe sɔsɔ le vevie be woakpɔ kuɖɔwo, delamination, warping, shrinkage kple nuwuwu ƒe titrime dzi.
Woƒoa agbalẽ siwo wotsɔ lãgbalẽ wɔe la ɖe agbalẽvi ɖekaɖekawo me eye emegbe woate ŋu axɔ ame ŋutɔ ƒe nɔnɔme, nuŋɔŋlɔ, asidede agbalẽ te ƒe akpawo alo dɔ bubuwo wɔwɔ.
Dze egɔme kple dɔbiagbalẽvia: ID, mɔɖeɖe dzi kpɔkpɔ, amedzrodzeƒe ƒe safui, hamevinyenye, nuteƒewɔwɔ, nunana, mɔzɔzɔ, dɔwɔgbalẽvi alo dɔ bubu aɖe.
Tia PVC, PET/PETG, composite, polycarbonate alo ga le agbenɔƒe si wokpɔ mɔ na, dzoxɔxɔ, agbalẽtata, dedienɔnɔ kple premium-design ƒe nudidiwo nu.
Ne kaɖia le dɔ wɔm kple ɖoɖo aɖe si li xoxo la, de dzesi barcode scanner, magnetic-stripe reader, RFID reader, amedzrodzeƒe ƒe gaƒoɖokui, access reader alo fexexe ƒe dɔwɔnu hafi nàtia mɔ̃ɖaŋununya la.
Mègabia 'RFID kaɖi' alo '13.56 MHz kaɖi' ko ne ɖekawɔwɔ le vevie o. Tsɔ chip ƒomea, ŋkuɖodzinu, ɖoɖowɔɖi alo ɖaseɖigbalẽ ƒe nufiame si li xoxo.
Kpɔe ɖa be woata kaɖiwo le dɔwɔƒe ƒe offset, woatrɔ asi le wo ŋu le dijitaalmɔ̃ dzi, woata wo kple agbalẽtamɔ̃ si wotsɔna taa kaɖi tẽ, woata wo ake alo woata wo to laser dzi.
Tsɔ hologram, UV nɔnɔmetatawo, microtext, laser ƒe ame ŋutɔ ƒe nɔnɔme, asidede agbalẽ te, xexlẽdzesiwo alo kpeɖodzinana ƒe nudidi bubuwo le afisi wòsɔ le.
CR80 / ID-1 bɔ, gake ele be didime siwo wowu enu pɛpɛpɛ kple eƒe titrime nasɔ kple agbalẽtamɔ̃, nuxlẽla, kaɖi-namɔ̃ alo gaƒoɖokui si woɖo be woazã.
Nudzɔdzɔ ƒe ɖaseɖigbalẽ si woate ŋu atsɔ aƒu gbe, amedzrodzeƒegbalẽvi, dɔwɔlawo ƒe akɔtagbalẽvi kple dziɖuɖu ƒe ID si nɔa anyi didi hiã na nusiwo wotsɔ wɔe kple alesi wòanɔ anyi eteƒe nadidi ƒe nɔnɔme siwo to vovo kura.
Ele be woado kpɔɖeŋugbalẽviwo kpɔ kple agbalẽtamɔ̃, encoder, nuxlẽla, gaƒoɖokui, mɔɖeɖedzikpɔmɔ̃ alo dɔwɔnu bubu siwo wowɔna kple esiwo wozãna tsɔ wɔa woe hafi woawɔ wo le agbɔsɔsɔ gã me.
Kpekpeɖeŋugbalẽvi ƒe didime: ɖo kpe didime, kekeme, dzogoe ƒe didime kple atamkaka ƒe nyateƒenyenye dzi.
Finished titrime: ɖo kpe kaɖi ƒe titrime kple mɔɖeɖe ɖe eŋu dzi.
Flatness: lé ŋku ɖe kaɖi ƒe warpage ŋu le lamination megbe.
Layer adhesion: lé ŋku ɖe bubbles, peeling kple delamination.
Agbalẽtata: lé ŋku ɖe amadede, ŋkɔ ŋɔŋlɔ, nuŋɔŋlɔ kple nɔnɔmetatawo ŋu.
Nyatakaka siwo trɔna: ɖo kpe ŋkɔwo, xexlẽdzesiwo, fotowo, QR-kɔdawo kple barcodewo dzi ɖe nyatakakawo ƒe faɛl la ŋu.
Magnetic stripe: lé ŋku ɖe teƒe si wòle, dzedzeme kple encoding ŋu le afisi wòhiã le.
Chip ƒe nɔnɔme: ɖo kpe contact-chip alo RFID-chip ƒe nɔnɔme dzi le kaɖi tutu ŋu.
Antenna ƒe yiyi: ɖo kpe RFID antenna ƒe blibonyenye dzi.
RF ƒe dɔwɔwɔ: ɖo kpe kadodo kple nuxlẽla siwo sɔ dzi.
Encoding: da asi ɖe nyatakaka siwo ŋu wowɔ ɖoɖo ɖo kple elektrɔnikdɔ siwo hiã dzi.
Holographic overlay: ɖo kpe teƒe si wòle kple nukpɔkpɔ ƒe dzedzeme dzi.
Laser personalization: lé ŋku ɖe vovototo, teƒe kple nyatakakawo ƒe nyateƒenyenye ŋu le afisi wòsɔ le.
Anyigba ƒe nyonyome: lé ŋku ɖe ʋuʋudedi, ɖiƒoƒo, dzesiwo kple nuwuwu ƒe gbɔdzɔgbɔdzɔwo ŋu.
Kpekpeɖeŋugbalẽvi ƒe dɔwɔwɔ: ID, mɔɖeɖe, hamevinyenye, amedzrodzeƒe, nuteƒewɔwɔ, nunana, mɔzɔzɔ alo dɔbiagbalẽvi bubu.
Kpekpeɖeŋugbalẽvi: PVC, PET / PETG, nu ƒokpli, PC, ga alo kpɔɖeŋu si li xoxo.
Dimensions: CR80 / ID-1 alo lolome si wowɔ ɖe ɖoɖo nu.
Titrime: taɖodzinu wu titrime kple mɔɖeɖe ɖe nu ŋu.
Agbɔsɔsɔ: kpɔɖeŋu, kpeɖodzi agbɔsɔsɔme kple asitsatsa ƒe agbɔsɔsɔme.
Nutata: PDF, AI alo nutata bubu siwo wowɔ.
Agbalẽtata: offset, screen, digital, DTC, retransfer alo dɔwɔwɔ bubu.
Ame ŋutɔ ƒe nɔnɔme: ŋkɔ, foto, xexlẽdzesi, barcode, QR code, asidede agbalẽ te alo laser engraving.
Magnetic stripe: gblɔ HiCo/LoCo kple encoding ƒe nudidi ne esɔ.
RFID ƒe ɣeyiɣi ƒe didime: LF, HF alo UHF.
Chip: chip ƒe kpɔɖeŋu si sɔ pɛpɛpɛ alo esi dzi woda asi ɖo si sɔ kplii.
Nuxlẽla: nuxlẽla ƒe kpɔɖeŋu, amedzrodzeƒe ƒe gaƒoɖokui alo mɔɖeɖe ƒe ɖoɖo si me woƒe sɔsɔ le vevie le.
RFID ƒe ɖoɖo: na antenna alo kaɖi-ɖoɖo ƒe nudidiwo le afisi wòsɔ le.
Dedienɔnɔ ƒe nɔnɔmewo: hologram, UV, microtext, laser ƒe nɔnɔme alo nudidi bubu.
Finish: gloss, matte, transparent, frosted, ga alo anyigba bubu aɖe.
Metal-card dɔwɔwɔ: gblɔ nuŋɔŋlɔ, nuŋɔŋlɔ, lãɖeɖe, nuwuwu kple RFID ƒe nudidi le afisi wòsɔ le.
Nubablɛ: ame ɖekaɖekawo ƒe babla, ɖoɖowɔwɔ ɖe wo nɔewo yome alo dɔa ƒe nudidi bubuwo.
Wallis naa kaɖi-ŋutilã nuwo ƒe ƒome geɖewo, si wɔnɛ be kaɖi wɔlawo te ŋu tiaa substratewo le gazazã, agbalẽtata, woƒe anyinɔnɔ, lamination kple dedienɔnɔ ƒe nudidiwo nu.
Woate ŋu atsɔ kaɖi ƒe nu vevi siwo le ɣie, siwo le amadede vovovowo me kple esiwo me kɔ la aƒo ƒu kple nutsyɔnu siwo sɔ na kaɖi si wota kple esi wotsɔ lãgbalẽ wɔe.
Wallis naa RFID prelam inlays kple embedded chip kple antenna structures na contactless smart-card wɔwɔ, si me LF, HF kple UHF dɔa ƒe nudidiwo hã le.
Woate ŋu adzro magnet-stripe overlays kple nukpɔkpɔ-dedienɔnɔ ƒe nudidi bubuwo me le kaɖi ƒe wɔwɔme si wowɔ vɔ nu.
Nuƒlelawo ate ŋu adzro raw core sheets, overlays, RFID prelam inlays, blank cards alo customized finished-card production me le woƒe wɔwɔme ƒe dɔwɔwɔ nu.
Kpɔɖeŋuwo ɖea mɔ na nuƒlelawo be woaɖo kpe agbalẽtata, lamination, amadede, didime, RF ƒe dɔwɔwɔ, encoding kple ɖekawɔwɔ kple kaɖi ƒe agbalẽtamɔ̃ alo nuxlẽla ŋutɔŋutɔ dzi hafi woawɔ asitsatsa.
Woate ŋu ama kaɖiwo ɖe hatsotsowo me le nusiwo wotsɔ wɔe, mɔ̃ɖaŋununya alo dɔwɔwɔ nu. Kpɔɖeŋu siwo bɔ enye PVC kaɖiwo, PETG kaɖiwo, PC kaɖiwo, ga kaɖiwo, magnetic stripe kaɖiwo, smart cardwo, RFID kaɖiwo, NFC kaɖiwo, ID gbalẽviwo, mɔɖeɖegbalẽviwo, hamevinyenye gbalẽviwo, nuteƒewɔwɔ gbalẽviwo, amedzrodzeƒegbalẽviwo kple nunana gbalẽviwo.
Wozãa PVC geɖe na asitsatsa ƒe plastik-kaɖiwo elabena enaa gazazã, agbalẽtata kple kaɖi-wɔwɔ ƒe dɔwɔwɔ ƒe dadasɔ ŋutɔŋutɔ.
Wozãa PVC geɖe na gazazã ƒe taɖodzinu gbadzaa ƒe kaɖiwo, esime PETG ate ŋu ana dzoxɔxɔ, sesẽme kple lamination ƒe nɔnɔme vovovowo. Nusi sɔ si woatsɔ awɔ agbalẽvi la nɔ te ɖe alesi wowɔa kaɖiae kple alesi wowɔe dzi.
Polycarbonate doa alɔ multilayer card structures siwo nɔa anyi didina eye ate ŋu ade laser-reactive personalization layers, si wɔe be wòɖea vi na agbenɔƒe didi kple dedienɔnɔ ƒe dzesidegbalẽvi siwo le dedie wu.
Nuƒomɔ̃ si wotsɔ ƒo ƒui si ate ŋu adzra nyatakakawo ɖo alo awɔ dɔ tso wo ŋu la le smart card me. Smart card ateŋu azã kadodo ŋutɔŋutɔ ƒe ƒomedodo, kadodo si me kadodo mele o alo ƒuƒoƒo le kaɖi ƒe nɔnɔme nu.
Chip kple antenna si doa ka kple radio-frequency reader si sɔ la le RFID kaɖi me.
RFID nye radio-frequency dzesidede mɔ̃ɖaŋununya ƒe hatsotso gã aɖe. NFC nye mɔ̃ɖaŋununya tɔxɛ aɖe si me kadodo mele o si te ŋu zɔa mɔ kpuie si wɔa dɔ le 13.56 MHz. Menye RFID kaɖi ɖesiaɖee nye NFC kaɖi o.
Ao, kaɖi ƒe mɔ̃ɖaŋununya geɖe siwo me kadodo mele o wɔa dɔ le 13.56 MHz dzi. Ele be woaɖo kpe chip kple protocol ƒe ɖekawɔwɔ dzi hafi ayɔ kaɖi si sɔ kple NFC.
RFID prelam inlay nye kaɖi ƒe ƒuƒoƒo si wowɔ afã kple afã si me antenna kple chip le plastic nu me hafi tata mamlɛtɔ, lamination kple kaɖi punching.
Magnet-kaɖi dzraa nyatakaka siwo woŋlɔ ɖe kɔpi me ɖo ɖe magnet-kaɖi si le kaɖia ƒe anyime eye wòhiã be woatsɔ magnet-xlẽla si sɔ.
HiCo kple LoCo ɖɔa magnet-ŋusẽ ƒe sesẽme vovovowo. Zi geɖe la, wotiaa HiCo na kaɖi siwo woate ŋu azã enuenu, gake LoCo ate ŋu asɔ na dɔwɔɖoɖo siwo me womedea kaɖiwo ƒe kɔpi edziedzi o alo woɖɔlia wo zi geɖe. Ele be woaɖo kpe nuxlẽla kple encoder ƒe ɖekawɔwɔ dzi.
Kpekpeɖeŋugbalẽvi geɖe zãa CR80 / ISO ID-1 ƒe didime si ade 85.60 × 53.98 mm.
Anɔ abe milimeta 0.76 alo milimeta 30 ene bɔ ɖe ID-gbalẽvi siwo ƒe lolome sɔ me, togbɔ be mɔ̃ɖaŋununya kple dɔwɔwɔ tɔxɛwo ate ŋu abia xɔtutu vovovowo hã.
Agbalẽtata tẽ ɖe kaɖi dzi tsɔa nɔnɔmetata la yia kaɖia ƒe anyime tẽ. Retransfer printing gbã la, wotae ɖe domedome film dzi eye emegbe woblaa nɔnɔmetata la ɖe kaɖia ŋu, si ate ŋu ana nugbɔ ƒe nutsyɔnu kple agbalẽtata nanyo ɖe edzi le smart-card ƒe xɔtuɖoɖo siwo wotsɔ de eme dzi.
Ɛ̃. Mɔ̃ɖaŋununya vovovowo ƒe kaɖi ƒe xɔtutuwo ate ŋu aƒo RFID inlay kple magnetic stripe nu ƒu ne ehiã be woawɔ ɖeka kple ɖoɖo eve.
Ɛ̃. Dual-frequency card xɔtutuwo ateŋu aƒo RFID mɔ̃ɖaŋununya eve siwo sɔ nu ƒu ne wowɔ antenna ƒe ɖoɖo, chip ƒe nɔƒewo kple eƒe titrime si wowu enu nyuie.
Woate ŋui, gake ga la kpɔa ŋusẽ ɖe antenna ƒe nuwɔna dzi. Eyata gagbalẽvi siwo ŋu NFC-na woate ŋu awɔ dɔ le la hiã kaɖi ƒe wɔwɔme tɔxɛ aɖe kple RF dodokpɔ tsɔ wu ga gbadzɛ si wozãna ɖaa si me wotsɔa nusi wotsɔ dea nu me si wozãna ɖaa.
Embossing ate ŋu atsɔ asikaka ame ŋutɔ ƒe nɔnɔme akpe ɖe eŋu, gake mele be woaɖo ŋu ɖe eŋu be eyae nye ɖoɖo vevitɔ si tsi tre ɖe aʋatsokaka ŋu o. Zi geɖe la, dedienɔnɔ ŋuti ɖaseɖigbalẽ siwo de ŋgɔ wu ƒoa dedienɔnɔ ŋuti mɔ̃ɖaŋununya ŋutɔŋutɔ kple elektrɔnikmɔ̃ geɖe nu ƒu.
Mɔnukpɔkpɔgbalẽvi nyuitɔ kekeakee nye kaɖi si sɔ kple nuxlẽla si woda ɖe eme kple dedienɔnɔ ƒe seƒe si wobia. Ele be nuƒlelawo nade dzesi nuxlẽla, frequency, chip kple credential system hafi atia nusi alo kaɖia ƒe dzedzeme.
Ele be kaɖia nasɔ kple amedzrodzeƒe ƒe gaƒoɖokui ƒe mɔ̃ɖaŋununya si woda ɖe eme. Nuɖoanyi siwo li fifia ate ŋu azã magnet-ka alo RFID-kaɖi siwo me kadodo mele o, eyata ele be nuƒlelawo natsɔ gaƒoɖokui ƒe kpɔɖeŋu alo kaɖi ƒe kpɔɖeŋu si li xoxo ana.
Ðewohĩ nuteƒewɔwɔ ƒe ɖoɖo bɔbɔe aɖe ahiã be woatsɔ barcode alo QR code si wota ko. Dɔwɔɖoɖo siwo wɔa dɔ geɖe wu ateŋu azã magnetic stripe, RFID alo NFC le POS kple asisiwo dzikpɔkpɔ ƒe xɔtuɖoɖowo nu.
Ɛ̃. Wallis naa card core sheets kple overlay materials le PVC, PETG kple polycarbonate ƒomewo me na card-wɔwɔ ƒe nudidi vovovowo.
Ɛ̃. Wallis naa RFID prelam inlays kple embedded chip kple antenna xɔtuɖoɖowo na LF, HF kple UHF kaɖi dɔwo.
Ɛ̃. Ele be woado kpɔɖeŋugbalẽviwo kpɔ be woƒe didime, wo tata, wo lamination, encoding, chip alo antenna ƒe dɔwɔwɔ kple woƒe ɖekawɔwɔ kple agbalẽtamɔ̃, nuxlẽla, amedzrodzeƒe ƒe gaƒoɖokui alo mɔ̃ si dzi wokpɔna be woage ɖe eme ŋutɔŋutɔ hã.
Na kaɖi ƒe dɔwɔwɔ, nusi wotsɔ wɔe, didime, titrime, agbɔsɔsɔ, nutata, agbalẽtata, ame ŋutɔ ƒe tɔtrɔ, chip alo magnetic-stripe mɔ̃ɖaŋununya, nuxlẽla ŋuti nyatakakawo, dedienɔnɔ ƒe nɔnɔmewo kple nubablɛ ƒe nudidiwo.
Mɔ bɔbɔetɔ si dzi nàto atia agbalẽvie nye be nàdze egɔme tso dɔ si wobia tso asiwò dzi. Ne dɔa me kɔ ko la, nuƒlelawo ate ŋu anya nusiwo hiã, agbenɔƒe, agbalẽtatamɔnu, chip, antenna, nuxlẽla ƒe ɖekawɔwɔ kple dedienɔnɔ ƒe nɔnɔmewo.
Nuteƒewɔwɔ ƒe agbalẽvi si wota si ƒe asi bɔbɔ, amedzrodzeƒe ƒe safui si nye RFID, ga nyuitɔ ƒe hamevinyenye ƒe agbalẽvi kple polycarbonate ID si wotsɔ laser wɔe la katã ate ŋu akpɔ didime ɖeka, gake woƒe nuwo ƒe wɔwɔme, ewɔwɔ ƒe ɖoɖowo kple mɔ̃ɖaŋununya ƒe nudidiwo to vovo kura.
Ðo wò kaɖi ƒe dɔbiagbalẽvi, nuxlẽla alo ɖoɖo si li xoxo, nusiwo hiã, chip mɔ̃ɖaŋununya, agbalẽtata ƒe nutata, eƒe titrime si wowu enu kple agbɔsɔsɔ ɖe Wallis be nàdzro kaɖi ƒe nu siwo sɔ, RFID prelam inlays alo kaɖi ƒe kpɔɖeŋu siwo wowɔ vɔ me.
