Custom Blister Packaging ni PVC Filimu gɛlɛn: Dilancogo, baarakɛcogo ani baarakɛcogo

Custom Blister Packaging ni PVC Filimu gɛlɛn ye

Blister foroko minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu ka kan ka fɛn dilannenw yecogo, u lakanani, u dilanni baarakɛcogo, u sigicogo bɛnkan, u taamasiyɛn, u dilanni nafa, ani u musakaw bɛn ɲɔgɔn ma. PVC filimu gɛlɛn min bɛ kɛ ka kurukuruw pakew kɛ, o tora funteni-sɛnɛfɛn ye min bɛ kɛ ka caya bawo a bɛ jɛya ɲuman di, ka a bonya sabati, ka baara kɛ, ani ka fɛn caman sɛgɛsɛgɛ kurukuruw dilanni suguya wɛrɛw la.

Pakew tigɛbagaw fɛ, thermoforming iziniw fɛ, markatigiw fɛ, ani OEM dilannikɛlaw fɛ, ka filimu gɛlɛn PVC ɲuman sugandi, o tɛ fɛnw latigɛ dɔrɔn ye. Filimu ka kan ka bɛn ni kurukuruw kɔnɔna juguya ye, a dilanni minɛnw, a sigicogo, a sɛbɛnni wajibiyalenw, a baara laban sigida, ani sariyaw walima barikalan fɛn o fɛn bɛ sirataama.

PVC Filimu gɛlɛn ye mun ye ka ɲɛsin Blister Packaging ma?

PVC filimu gɛlɛn ye filimu ye min ka gɛlɛn kosɛbɛ walima fɛn finman min bɛ se ka sumaya ka kɛ funteni ye ka kɛ dingɛ ɲɛfɔlen ye. A dilanni ni a nɛnɛ kɔfɛ, o fɛn bɛ kurukuru cogoya mara ani ka lakanani datugulan jɛlen walima kulɛrilen di fura pake lamini na.

A ka ɲɛnayeli jɛlen, a gɛlɛya, a dilanni kɛcogo, ani a musaka dɔgɔyali faralen ɲɔgɔn kan, o b’a to rigid PVC bɛ bɛn blister ni thermoformed packaging baarakɛcogo caman ma minnu bɛ kɛ cogo kɔrɔ la. Ka kɛɲɛ ni a dilanni ni poroze ka magow ye, a bɛ se ka dilan cogo jɛlen na, ni tintin ye, ni kulɛri ye, ka manamana, ka kɛ matte ye, ka kɛ rollo ye, walima ni sɛbɛnfura ye.

Mun na PVC Filimu gɛlɛn bɛ baara kɛ ka ɲɛ Blister Packs Customized (Blister Packs) la

Thermoforming baarakɛcogo min bɛ se ka da a kan

PVC gɛlɛn bɛ se ka sumaya ka kɛ kurukuruw cogoya caman ye. Jatebɔlan sabatilen, funteni min bɛ kɔrɔsi, mɔbili dilanni bɛnnen, ani a dilanni paramɛtiriw bɛ dɛmɛ ka dingɛw dilan minnu bɛ bɛn ɲɔgɔn ma ni ɲɛfɔli ɲuman ye ani minnu bɛ se ka segin-ka-bɔ.

Fɛn dilannenw yecogo ka bon

PVC filimu gɛlɛn jɛlen bɛ a to fɛn min bɛ pake kɔnɔ, o ka to ka ye. O nafa ka bon feerekɛlaw ka blister packs, fɛnɲɛnamafagalanw, ɛntɛrinɛti fɛnw, sɛbɛnnikɛlanw, ɲɛgɛnw, tulonkɛfɛnw, ani fɛn caman wɛrɛw la, kiliyanw ka kan ka fɛn in sɛgɛsɛgɛ yɔrɔ minnu na sani u ka san.

Dimensionnel Stability ani Lakanali

A jɔcogo gɛlɛn bɛ kurukuru min dilanna, o dɛmɛ k’a cogoya mara a facogo, a datugucogo, a minɛcogo, a tacogo, a jiracogo ani a marali waati. Fɛn minnu sugandira ka ɲɛ, olu bɛ se ka fura tanga a ma ka maga a la tigitigi, ka a yɔrɔ tiɲɛ, ani ka a tiɲɛ a foroko kɛcogo la cogo bɛnnen na.

Kulɛri, Surface ani Branding Flexibilité

PVC filimu gɛlɛn bɛ se ka ladilan ka kɛɲɛ ni kɛnɛya ye, a ɲɛ, a kulɛri, a ɲɛda cogoya, ani a jiginni cogo la. Ka kɛɲɛ ni kalasi sugandilen ye, o fɛnw bɛ se ka jateminɛ fana walasa ka sɛbɛnni kɛ, ka sɛbɛnni kɛ, ka fɛnw sɔgɔ, ka u tigɛ, ka u da, walima ka u datugu.

Blister Packs bɛ se ka kɛ cogo min na ka kɛɲɛ ni mɔgɔw sago ye

Custom Thickness ani Gauge (Jateminɛ kɛcogo).

Filimu daminɛ girinya bɛ nɔ bila dingɛw gɛlɛyali la, fɛnw tacogo la, funteni kɛcogo la, u dilanni juguya la, kogow dɔgɔyali la, ani pake laban fanga la. Kurukuru min ka dun walima min ka bon, o bɛ se ka daminɛ jateminɛnan wɛrɛ de wajibiya ka tɛmɛ feerekɛyɔrɔ kurukuru min man dun.

Custom Width, Roll Janya, ani Sheet Size

Walasa ka B2B dilan ka ɲɛ, PVC filimu bɛ se ka ɲɛfɔ ka kɛɲɛ ni thermoforming machine bonya ye, baarakɛminɛnw labɛncogo, balocogo, roll configuration, walima sheet-fed process. Ni fɛn dilannenw hakɛw bɛ bɛn fɛn dilanni sira ma, o bɛ dɛmɛ ka dɔ bɔ tigɛtigɛ tiɲɛniw na, ka baara kɛcogo ɲɛ.

Sugandili jɛlen, Tinti, Kulɛri walima Opaque

Filimu jɛlen bɛ fɛn dilannenw yecogo caya, k’a sɔrɔ tintin walima kulɛri PVC bɛ se ka fɛn dilannenw danfara, yeelen marali, fɛn dilannenw dɔnni, walima suguya dɔnni dɛmɛ. Sugandili minnu tɛ ye, olu bɛ se ka jateminɛ yɔrɔ minnu na fura dogocogo walima ɲɛnayeli kɛrɛnkɛrɛnnen dɔ ka kan ka kɛ.

Surface ani Printing wajibiyalenw

Ni kurukuru filimu bɛna sɛbɛn, ka taamasiyɛn kɛ, ka da, ka funteni datugu, ka a datugu, walima ka a siri, a ɲɛda ni a kɛcogo ka kan ka sugandi ka kɛɲɛ ni fɛn caman tigɛli fɛɛrɛ ye. Enki nɔrɔli, a sanfɛla furakɛli, a datugulan, a nɔrɔcogo, ani a sirili fanga dafalen ka kan ka sɛgɛsɛgɛ sani a ka kɛ caman ye.

Fɛn kolomaw ni i bɛ PVC Filimu gɛlɛn sugandi

Sugandili Factor (Sugandili Factor).	Mun na a nafa ka bon	Sannikɛla ka kan ka min di
Blister cavité hakɛ	A bɛ nɔ bila foroko juguya la, kogow dɔgɔyali la, ani kɔnɔna gɛlɛyali la	Fɛn dilannenw hakɛ, a kɔnɔna juguya, mɔbili ja
Filimu ka bonya	A bɛ nɔ bila foroko kɛcogo la, fanga ani fɛnw baaracogo la	Sisan jateminɛ walima laɲini baarakɛcogo
Masina ka bɛnkan	Masina suguya caman bɛ baara kɛ ni funteni, balo ani fɛn dilanni cogoya wɛrɛw ye	Masina suguya, a dilanni fɛɛrɛ, layini teliya
Optique wajibiyalen don	Fɛn jɛlen, sisi, kɛnɛya ani kulɛri bɛ nɔ bila fɛn dilannenw jiracogo la	Wajibiya jɛlen, tintin, kulɛri, matte, walima glossy
Sigili walima a sirili	Filimu ka kan ka baara kɛ ni datugulan, karti, nɔrɔlan walima sigilan sugandilen ye	Datugulan fɛn, nɔrɔli, sigicogo
Barrière wajibiyalen don	Standard PVC bɛ se ka kɛ a tɛ ji walima oksizɛni lakanani bɛrɛ di furaw ma minnu bɛ mɔgɔ sɛgɛn	A maracogo laɲini, fɛn dilannenw ka sɛgɛsɛgɛli, WVTR/OTR wajibiyalen ni o bɛ se ka kɛ
Sariya labatoli wajibiyalen	Furakɛcogo, furakɛli ani dumuniko baarakɛcogo bɛ se ka kɛ ni jatedenw ni sɛbɛnw ye minnu bilalen bɛ u yɛrɛ ye	Baara labanko izini, taayɔrɔ sugu, sariya min bɛ sirataama

       Aw ye baro kɛ aw ka Blister Packaging Project kan    

PVC Filimu gɛlɛn min bɛ kɛ ka blister packaging baarakɛcogo wɛrɛw kɛ

Retail ani Consumer Product Blister Packs (Fɛnfeerelaw ni feerekɛlaw ka fɛnw blister Packs).

PVC blister pake jɛlenw bɛ se ka kɛ fɛnɲɛnamafagalanw, baarakɛminɛnw, fɛn wɛrɛw, sɛbɛnnikɛlanw, tulonkɛfɛnw, du kɔnɔfɛnw, ani mɔgɔw ka fɛn wɛrɛw ye. Fɛn dilannenw yecogo ani u jɔcogo min dilannen don, o bɛ dɛmɛ don ka fɛn in lakana ka sɔrɔ ka feerelikɛyɔrɔ jiracogo barikama mara.

Elektɔriki ni fɛn misɛnninw

Kabaliw, ɲɔgɔndanw, batiriw, ɛntɛrinɛti fɛn misɛnninw ani u yɔrɔw la, blister foroko bɛ se ka fɛnw labɛn ani k’u lakana ka sɔrɔ u bɛ to ka ye. Porozɛ minnu bɛ ni fɛnw ye minnu bɛ se ka wuli ka bɔ u nɔ na, ​​olu ka kan ka baarakɛcogo wajibiyalenw bɛɛ ɲɛfɔ minnu bɛ se ka kɛ fɛnw ye minnu bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ.

Kosmɛtikiw ni mɔgɔ yɛrɛ ladonni foroko

Kurukuruw jɔcogo jɛlen bɛ se ka ɲɛgɛnw, cɛɲa baarakɛminɛnw, mɔgɔ yɛrɛ ladonnifɛnw, ani fɛnw jira minnu bɛ kɛ ka fɛnw laseli kɛ. Siginidenw, tintinw ani jiracogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka dɛmɛ don premium shelf appearance ani brand differentiation.

Furakɛcogo ni kɛnɛyako Blister Packaging

Furakɛcogo kurukuruw foroko bɛ fɛnw sugandili kɛcogo de wajibiya min bɛ kɔlɔsi kosɛbɛ. Filimu gɛlɛn PVC min kɛrɛnkɛrɛnnen don furakɛli siratigɛ la, o bɛ se ka bɛn furakisɛ walima furakisɛ kurukuruw ma minnu bɛ kɛ tuma bɛɛ, ni a tiɲɛna pake kɛrɛnkɛrɛnnen ni a taayɔrɔ sugu la. Fura minnu bɛ ji sɔrɔ walima minnu bɛ oksizɛni sɔrɔ, olu bɛ se ka kɛ ni barikalan ye min ka bon i n’a fɔ PVC /PVDC walima barikalan wɛrɛ min sɛgɛsɛgɛra sanni ka kɛ PVC gansan dɔrɔn ye.

Dumuni-ɲɔgɔnna ani a foroko kɛrɛnkɛrɛnnenw

Dumuni tali walima fura wɛrɛw minnu bɛ kɛ ni sariya ye, olu ka kan ka baara kɛ ni furakisɛ ye min jateminɛna kɛrɛnkɛrɛnnenya la a kɛcogo laɲininen na. Fɛn minnu bɛ bɛn, olu man kan ka jate ka bɔ polimɛri tɔgɔ dɔrɔn na. Sannikɛlaw ka kan ka sariyaw sɛbɛnw, jiginni wajibiyalenw, funteni cogoyaw, fɛn dilannenw bɛncogo, ani u foroko laban kɛcogo dafa sani u ka baara kɛ ni u ye jago siratigɛ la.

PVC Blister Packs minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu dilanni taabolo

1. Aw bɛ pakew dilanni wajibiyalenw ɲɛfɔ

O kɛcogo bɛ daminɛ ni fɛn dilannen ye min bɛ pake kɔnɔ, a kɔnɔna hakɛ, a yecogo ɲininen, a lakanani hakɛ, a dilanni hakɛ, masin suguya, a datugucogo, ani sariyaw ka wajibiw. O fɛnw de bɛ fɛnw ɲɛfɔcogo ɲuman jira.

2. Aw bɛ PVC Filimu gɛlɛn sugandi

Fɛn dilanbaga ni fɛn caman tigɛlikɛla bɛ PVC kalasi, a bonya, a bonya, a kulɛri, a sanfɛla, ani a kuru walima a sɛbɛncogo bɛnnen sugandi. Fɛn minnu bɛ se ka sɛgɛsɛgɛ walima minnu bɛ sariya kɔnɔ, barika ni sariya labatoli wajibiyalenw ka kan ka ɲɛfɔ nin waati in na.

3. Aw bɛ So funteni ni a dilanni Fenɛtiri yiriwa

PVC gɛlɛn bɛ sumaya fo ka se a dilanni cogoya bɛnnen ma, o kɔfɛ, a bɛ kɛ ni fɛnɲɛnamafagalan ye, ni degun ye, ni masinw dɛmɛni ye, walima ni fɛn dilanni fɛɛrɛw faralen ye ɲɔgɔn kan. Funteni finɛtiri ɲuman bɛ bɔ filimu dilanni na, a bonya la, a sofa dilanni na, a sɛrɛkili teliya la, a moulu jateminɛcogo la, ani a kɔnɔna juguya la.

4. Aw bɛ Foroko fa ani ka a datugu

Kɔnɔbara basigilen kɔfɛ, fura in bɛ don kurukuru kɔnɔ ka fara a kɔkanna walima a datugulan sugandilen kan. Sigili kɛcogo ka kan ka bɛn PVC fɛn ma ani ka tiɲɛ ka kɛɲɛ ni sirili fanga wajibiyalen ye ani pake dafalen.

5. Aw bɛ a tigɛ, ka a sɛgɛsɛgɛ ani ka a pake

Kurukuruw dafalenw bɛ tigɛ walima ka u tigɛ ka sa, ka u sɛgɛsɛgɛ, ka u pake. Ka kɛɲɛ ni baarakɛcogo ye, jogoɲiniw bɛ se ka kɛ a yecogo ye, a kɔnɔna hakɛw, a kogo tilatilali, a jɛlen don, a datugucogo fanga, a foroko dafalen, a sɛbɛnni cogoya, a nɔgɔko kɔlɔsili, ani a hakɛw bɛ bɛn ɲɔgɔn ma.

Jogoɲumanya kɔlɔsili PVC Blister Film ani Finished Packs kan

A bonya ni a bonya ni a bonya

A janya kelen bɛ filimu dɛmɛ ka sumaya ani ka a sɔgɔ ka ɲɛ ka ɲɛ thermoforming waati. Jateminɛ caman ɲɔgɔnna bɛ se ka kɛ sababu ye ka kogo janya ɲɔgɔn tɛ, ka kɛ sababu ye ka dingɛ ɲɛfɔcogo dafa, ka gɛlɛyaw sɔrɔ ɛntɛrinɛti nɔfɛtaama fɛ, ani ka kɛ sababu ye ka sigicogo sabati.

Optique ani Surface Qualité (Yɔrɔ ɲɛnama ni Surface Quality).

Walasa ka kurukuruw foroko jɛlenw sɔrɔ, sannikɛlaw ka kan ka kɛnɛya, sisi, kulɛri cogoya, kɛnɛya, sɔgɔsɔgɔninjɛ, jeli, bugun, nɔgɔ, ani nafamafɛn wɛrɛw jateminɛ ka kɛɲɛ ni sɔnni sariya ye min bɛnna.

Forming ani Sealing baarakɛcogo

Fɛn dɔ ka kan ka sɛgɛsɛgɛ pakew dilanni sira yɛrɛ la walima a jiralan kan ni a bɛ se ka kɛ tuma o tuma. Foroko kɔrɔbɔliw bɛ se ka kɛ sababu ye ka kɔnɔnafili, degun taamasiɲɛw, web sag, foroko dafalen, dɔgɔyali, nɔrɔli, walima hakɛ koɲɛw jira minnu bɛ se ka ye ka bɔ filimu fla sɛgɛsɛgɛli dɔrɔn na.

Sɛbɛnni ni sariya labatoli

Porozɛ minnu bɛ furakɛli, kɛnɛyako, dumuniko, walima baarakɛcogo wɛrɛw kan minnu bɛ sariya kɔnɔ, olu ka kan ka fɛɛrɛ ni sariyasɛbɛnw wajibiyalenw ɲɛfɔ sani u ka komandi kɛ. Sariya labatoli ka kan ka dafa ka ɲɛsin kalasi kɛrɛnkɛrɛnnen ma, baarakɛcogo laɲininen, ani taayɔrɔ suguya.

Plain PVC vs. Sanfɛ-bariyɛri kurukuruw jɔcogo

Plain rigid PVC bɛ thermoformability, transparency, dimensional stability, ani cost efficiency faralen ɲɔgɔn kan cogo nafama na, nka a tɛ ji ni oksizɛni barika kelen di ni fɛn kɛrɛnkɛrɛnnenw ye minnu bɛ kɛ ni fɛn caman ye walima minnu datugulen don.

Fɛnɲɛnɛmaw jɔcogo	Sugandili kun min bɛ kɛ tuma caman na	Jateminɛ yɔrɔ nafama
Plain rigide PVC	Thermoforming standard, jɛya, musaka dɔgɔyali	Aw ye a sɛgɛsɛgɛ ni fura in ka barika ɲinini ye danma ye ka se mono PVC ma.
PVC /PVDC ye baara kɛ	Ji ni oksizɛni barika ɲɛnabɔlen ka sɔrɔ ka thermoforming seko jɛlen mara	Sugandili ka kɛɲɛ ni sumanikɛlan barika ɲinini ye ani fɛn dilannen sabatili laɲini ye
Barikalan caman wɛrɛw	Fɛn minnu bɛ se ka kɛ fɛn ye, minnu bɛ lakana barikama de wajibiya	Aw ye barika, a sigicogo, a sigicogo, a musaka, a lasegincogo, ani a sariyaw lajɛ ɲɔgɔn fɛ

Blister Packaging Gɛlɛya minnu bɛ sɔrɔ tuma caman na ani fɛnw sugandili bɛ dɛmɛ cogo min na

Kogow janya tɛ kelen ye

Kogo janya tɛ kelen ye, o bɛ se ka kɛ sababu ye ka jatebɔ hakɛ caya kojugu, daminɛ jateminɛnan ma bɛn, funteni hakɛ min tɛ kelen ye, mɔbili jateminɛcogo nɔgɔlen, fɛn dilanni teliya, walima plug-assist dilancogo jugu. Fɛnɲɛnɛma ni thermoforming kɛcogo ka kan ka ɲɛ i n’a fɔ sigida kelen.

Forming dafabali walima Detail Reproduction jugu

Ni filimu ma sumaya ka ɲɛ walima ni a dilanni cogoyaw ma bɛn a fɛn ma, a bɛ se ka kɛ ko dingɛ tɛ se ka mɔli lasegin ka ɲɛ. Kɔrɔbɔli minnu bɛ kɔrɔsi, olu ka kan ka kɛ walasa ka funteni ni foroko finɛtiri bɛnnen sigi sen kan.

Web Sag, Sticking, walima Surface taamasiyɛnw

Ni funteni tɛmɛna, o bɛ se ka kɛ sababu ye ka web sɔgɔ, ka nɔrɔ, ka yeelen caman cili, ka bugun, ka fɛn tiɲɛ, walima ka kogo fin kojugu. So funteni sigicogo, a sigi waati, fɛnw funteni, u dilanni sɛrɛkili, ani nɛnɛ cogoyaw ka kan ka ladilan ka da PVC hakɛ kan min dagalen don.

Siginiden barikama

Sigilan barikamaw bɛ se ka kɛ sababu ye ka ɲɛsin datugulan ma min tɛ bɛn ɲɔgɔn ma, nɔrɔfɛn, funteni-sigida fini, nɔgɔ, degun, funteni, walima sigi waati. Dadoncogo labanw ka kan ka tiɲɛ ni pakew kɔnɔfɛnw yɛrɛ ye.

Sigida sabatili ani fɛnw sugandili

Sigida sabatili latigɛ minnu bɛ kɛ kurukuruw foroko kɔnɔ, olu ka kan ka jateminɛ kɛ pakew dilanni sira dafalen na sanni ka jateminɛ kɛ fɛnw taamasiɲɛw dɔrɔn kan. Fɛn nafamaw bɛ se ka kɛ fɛnw baaracogo ye, fɛnw dɔgɔyali seko, fɛn dilanni fɛn tiɲɛnenw, pakew girinya, bolifɛnw tacogo ɲuman, fɛnw lasegincogo, sariyaw ka wajibiw, ani fɛnw lakanani minnu ka kan ka kɛ walasa ka tiɲɛni walima tiɲɛni bali.

Porozɛ minnu bɛ fɛɛrɛ wɛrɛw ɲini PVC , PET , PETG , poliporopilini, walima funteni-sɛnɛfɛn wɛrɛw nɔfɛ, olu fana bɛ se ka jateminɛ ka kɛɲɛ ni u kɛcogo ye, ka kɛɲɛ ni u kɛcogo ye, ka kɛɲɛ ni u dilanni minɛnw ye, ka kɛɲɛ ni sigicogo ye, ka kɛɲɛ ni baarakɛcogo laɲini ye, ani sigida ka fɛnw lasegincogo.

PVC Blister Film Quote ɲinini cogo

Fɛɛrɛko kunnafoni dafalenw dicogo bɛ feerekɛla dɛmɛ ka fɛn dɔ laadi min bɛnnen don kosɛbɛ, wa o bɛ misali ta teliya la ani ka u fɔli teliya. B2B sannikɛlaw ka kan ka nin kunnafoniw di a ka fisa:

• Fɛn dilannenw ani baarakɛcogo labanw baarakɛyɔrɔ.

• A bonya wajibiyalen don, a bonya, a kuru janya, a sɛbɛnfura bonya, walima a ka fɛn ɲɛfɔcogo sisan.

• A ɲɛ jɛlen don, a ɲɛ ye bulama ye, a ɲɛ ye kulɛri ye, a ɲɛ bɛ manamana, walima a ɲɛ ye bulama ye.

• Thermoforming machine suguya, a dilanni fɛɛrɛ, ani a dilanni teliya.

• Blister cavity hakɛw, u juguya, ani baarakɛminɛnw kunnafoniw.

• Sɛbɛnni, dacogo, datugucogo, foli walima die-cutting wajibiyalenw.

• Ji walima oksizɛni barika baarakɛcogo wajibiyalen, ni o bɛ se ka kɛ.

• Dumuni, furakɛli, furakɛli walima sariya wɛrɛw.

• Koman hakɛ, misali wajibiyalen, a foroko kɛcogo, ani taayɔrɔ.

       Demande PVC Film Rigide misaliw & Quote    

FAQ About PVC Filimu gɛlɛn min bɛ kɛ ka blister pakew kɛ

PVC filimu gɛlɛn bɛ kɛ mun na kurukuruw foroko kɔnɔ?

PVC filimu gɛlɛn bɛ kɛ fɛn ye min bɛ se ka kɛ funteni ye walasa ka kurukuru jɛlenw walima kurukuru kulɛrilenw dilan. Baara minnu bɛ kɛ tuma caman na, olu ye feerelikɛyɔrɔw ka pakew ye, mɔgɔw ka fɛn dilannenw, ɛntɛrinɛti fɛnw, fɛnɲɛnamafagalanw, ɲɛgɛnw, ani furakɛli walima kɛnɛyako kurukuru sugandilenw ni u bɛ kɛ ni hakɛ bɛnnen ye min sɛgɛsɛgɛra.

Ne bɛ se ka PVC janya ɲuman sugandi cogo di blister pack kama?

A janya bɛnnen bɛ bɔ fɛn dilannen hakɛ la, a kɔnɔna juguya la, a ja hakɛ la, a gɛlɛya wajibiyalen na, a dilanni minɛnw, ani kogo janya hakɛ fitinin na a dilanni kɔfɛ. A ka ɲi ka misali sɛgɛsɛgɛli kɛ sani u ka kɛ caman ye.

Yala PVC filimu gɛlɛn bɛ se ka kɛ ka kɛɲɛ ni a kulɛri ni a bonya ye wa?

Awɔ. Ka kɛɲɛ ni a dilanni seko ye ani komandi hakɛ fitinin ye, PVC filimu gɛlɛn bɛ se ka ladilan ka kɛɲɛ ni a bonya, a bonya, a kurulen janya, a sɛbɛnfura hakɛ, a kɛnɛya, a ɲɛ, a kulɛri, a sanfɛla fini, ani a foroko cogoya.

Yala clear PVC bɛnnen don furakɛli kurukuruw foroko ma wa?

Filimu gɛlɛn PVC min bɛ se ka kɛ furako siratigɛ la, o bɛ se ka bɛn kurukuruw foroko kɔrɔw ma, fɛn dilannen kɔfɛ, pakew dilanni kɔfɛ, u sabatili kɔfɛ, u datugulen kɔfɛ, ani sariyaw tiɲɛni kɔfɛ. Fɛn minnu bɛ ji barikama walima oksizɛni lakanani wajibiya, olu bɛ se ka mago don PVC /PVDC walima fɛn wɛrɛ la min barika ka bon.

Yala PVC blister filimu bɛ se ka bɔ wa?

Sɛbɛnni bɛ se ka kɛ ni a yɔrɔ cogoya bɛnnen don, ni tintin kɛcogo bɛnnen don, ni a furakɛcogo bɛnnen don, ani ni fɛn caman tigɛli kɛcogo bɛnnen don. Sɛbɛnni nɔrɔli, a sɔgɔli, a dilanni kɛcogo, ani a sigicogo bɛnkan ka kan ka sɛgɛsɛgɛ a dilanni sira laɲininen kan.

Danfara jumɛn bɛ PVC ni PVC /PVDC blister film cɛ?

Plain PVC bɛ thermoforming baarakɛcogo jɔnjɔn di ani barika hakɛ danmadɔw. PVC /PVDC bɛ PVDC barikalan dɔ fara a kan min bɛ ji ni oksizɛni kunbɛncogo ɲɛ, o b’a to a bɛ bɛn baara ma minnu bɛ fɛn dilannenw lakanani caman wajibiya.

Ne ka kan ka kunnafoni jumɛnw ci PVC filimu gɛlɛn feerela dɔ ma?

Aw bɛ a kɛcogo, a bonya, a bonya, a kurulen walima a sɛbɛnfura cogoya, a kulɛri, a hakɛ, a thermoforming machine, a kɔnɔna hakɛw, a datugucogo, a barika wajibiyalen, a sariyataama, a foroko kɛcogo, ani a taayɔrɔ di. Ni a bɛ sɔrɔ, aw bɛ sisan fɛnw misali walima fɛɛrɛko ɲɛfɔli ci walasa u ka bɛn ɲɔgɔn ma.

Kuncɛli

PVC filimu gɛlɛn bɛ blister pake dilannikɛlaw dɛmɛ ni yɔrɔ ye min bɛ se ka wuli ka bɔ a nɔ na walasa ka fɛn dilannenw yecogo, u lakanani, u ka thermoforming baarakɛcogo, u hakɛ sabatili, ani u jiracogo min bɛ kɛ ka kɛɲɛ ni u yɛrɛ sago ye, olu fara ɲɔgɔn kan. Nka, kurukuru min ka fisa, o bɛ dɔn ni a foroko dafalen ye—a tɛ sɔrɔ polimɛri suguya dɔrɔn fɛ.

Walasa ka blister pakew labɛn ka ɲɛ, sannikɛlaw ka kan ka PVC hakɛ bɛn ni dingɛ dilanni ye, masin cogoya, barika wajibiyalen, sigicogo, sɛbɛnni kɛcogo, baarakɛcogo laban sigida, ani sariyaw minnu bɛ sirataama. Misaliw jateminɛni ni u dilanni siraw tiɲɛni ka kɔn u hakɛ sanni ɲɛ, o bɛ se ka dɔ bɔ farati la ani ka pakew kɛcogo ɲɛ.

       Aw ye ɲɔgɔn sɔrɔ Wallis fɛ ka kɛɲɛ ni Custom PVC Blister Film ye