More Language

Ka kɛɲɛ ni mɔgɔw sago ye PVC ABS Acrylique Edge banding

Ji tɛ se ka don a la min bɛ a kɛlɛ Surface Heat and Chemical Resistance
Izini-sɔrɔ-ji-minɛn min bɛ sɔrɔ izini na, min bɛ se ka sɔgɔsɔgɔ, a kɛra PVC ye, ABS , walima akiriliki, o bɛ na ni 
nafa min tɛ se ka suma ni bi minɛnw dilanni ye—o bɛ lakanani, muɲuli, cɛɲi, ani hali sugandiliw di minnu bɛ sigida lamini.

Sourcing Edge banding ka bɔ Wallis fɛ

 Ka da PVC Edge banding

PVC edge banding ye edge banding ye min bɛ kɛ ka caya mebɛri dilanni na. A dilannen don ni kuloridi polivinili ye, o ye polimɛri plastiki dilannen ye min bɛ se ka kɛ fɛn caman ye, wa a musaka ka dɔgɔ.

 Ka ɲɛsin PVC film Dilanbaga & Dilanbagaw ma

ABS ye plastiki ye min tɛ fɛnɲɛnamaw tiɲɛ PVC nɔ na . A bɛ o ɲɔgɔnna nafaw di nka kulori tɛ a la, o b’a to a bɛ sabati ani a bɛ se ka kɛ fɛn wɛrɛ ye.

 Ka ɲɛsin Akriliki ma Edge banding

Acrylic edge banding bɛ fini ɲuman di ni kɛnɛya ni jɛya ye min ka bon kosɛbɛ. A ka c’a la, a bɛ kɛ bi minɛnw ni kabiniw ye minnu ka bon kosɛbɛ.

Edge banding ye fɛn fitinin ye min bɛ kɛ mebɛri panɛriw dakunw na minnu bɛ kɛnɛ kan (a ka c’a la, u dilannen don ni MDF, particleboard walima plywood ye) walasa ka ɲɛda cogoya dafalen di, ka fɛn kolomaw lakana, ani ka u muɲuli bonya. A jɔyɔrɔ ka bon kosɛbɛ mebɛriw ka fɛnw cɛɲi n’u baarakɛcogo bɛɛ la.

Mun ia Edge banding

 
 
1749108625612
 
Edge banding ye fɛn nafamaba ye bi minɛnw dilanni na. A bɛ panɛriw ka minɛnw lakana, k’u cɛɲi, k’u si janya, k’a sɔrɔ a bɛ fɛn dilannikɛlaw dɛmɛ u ka se ka fɛn caman sɛgɛsɛgɛ u dilanni n’u kɔnɔfɛnw sugandili la. I mana kɛ fɛnw ye minnu tɛ musaka bɔ walima i mana fɛn dilannenw dilan minnu ka bon, ni i ye dakunw bandi ɲuman sugandi, o bɛ se ka i ka fɛn dilannen nafa n’a yecogo kɔrɔta kosɛbɛ.

PVC Edge banding

Ɲɛmɔgɔya PVC Edge banding Fɛn dilanbaga ni a dilannikɛla

PVC Edge banding Fɛn minnu bɛ kɛ:

A bɛ se ka wuli ka bɔ a nɔ na ani a kɛli ka nɔgɔn – a bɛnnen don dakun tilennenw ni dakun kurulenw ma.

Kulɛriw, fɛn dilannenw, ani finiw suguya caman – i n’a fɔ jirikisɛw, kulɛri gɛlɛnw, matte, gloss, ani high-gloss.

Ji ni fɛnɲɛnamafagalanw tɛ se ka don a la – a ka ɲi dumunikɛyɔrɔ ni sanuyaso minɛnw ma.

Mankan-bɔn – a bɛ dɛmɛ ka mankan dɔgɔya ka bɔ panɛri yɛrɛyɛrɛw la.
 

PVC Edge banding Nafa minnu bɛ a la:

Sɔrɔko siratigɛ la ani a bɛ sɔrɔ nɔgɔya la.

Muɲuli ɲuman don don o don baara kama.

A ka nɔgɔn ka masin kɛ ni standard edge banding equipment ye.
 
1747724806429

ABS Edge banding

Ɲɛmɔgɔya ABS Edge banding Fɛn dilanbaga ni a dilannikɛla

ABS Edge banding Fɛn minnu bɛ kɛ:

A tɛ fɛnɲɛnamaw tiɲɛ ani a bɛ se ka segin ka kɛ fɛn wɛrɛ ye – halojeniw ni nɛgɛ gɛlɛnw tɛ a la.

A bɛ se ka nɔ bila – a bɛ mɛn ka tɛmɛ gosili ni bɔgɔbɔgɔli kan.

A sabatilen don funteni yeli caman na – a bɛnnen don sigida caman ma.

Saniya ka nɔgɔn – a bɛ se ka yɔrɔ sɔgɔsɔgɔninjɛ ni kemikɛli nɔgɔli kɛlɛ.
 

ABS Edge banding Nafa minnu bɛ a la:

A bɛnnen don sow jɔli baara minnu bɛ kɛ ni jiri ye walima minnu bɛ sabati.

A lakananen don a jeni walima a jeni waati (fɛn minnu tɛ baga ye).

A bɛ se ka sɛgɛn ka ɲɛ ani ka a gosi.
 
1747794011833

Akiriliki Edge banding

Acrylic Edge banding ɲɛmɔgɔ ani a dilannikɛla

Acrylic Edge banding A ka baarakɛcogo:

A bɛ kɛnɛya kosɛbɛ ani a bɛ i n’a fɔ gilasi – a dafalen don ɲɛnajɛko walima bi cogoyaw kama.

Dugukolo ni kulɛri jɛlen – kulɛri bɛ to ɲɛnamaya la ani ka juguya waati tɛmɛnen kɔfɛ.

UV -resistant – a tɛ jɛ walima a tɛ tunun nɔgɔya la.

A bɛ se ka sɔgɔsɔgɔ ani ka sɔgɔsɔgɔ – a bɛ cɛɲi to a la ka mɛn.
 

Acrylic Edge banding Nafa minnu bɛ a la:

A bɛ pannew yecogo ɲɛ ni 3D kɛcogo ye min tɛ fɛn tiɲɛ.

A bɛ muɲu kosɛbɛ ani a bɛ mɛn a ɲɛda cogoya la.

A ka ɲi bi kɔnɔna dilancogo cogoyaw ma.
 
1747793440591
Tɔgɔ Téléchargements Category Thumbnail Kopi Lien Télécharger
Surface funteni ni nɛnɛ cycle resistance-Method 2.pdf 1536 Edge banding ka telesarize Kopi Lien Ka telesarize
Phthalate Kɔnɔkow.pdf 1642 Edge banding ka telesarize Kopi Lien Ka telesarize
Fɛn dɔw ka jiginni.pdf 1601 Edge banding ka telesarize Kopi Lien Ka telesarize
Yeelen kɔrɔya sɛgɛsɛgɛli- UV Exposition.pdf 1617 Edge banding ka telesarize Kopi Lien Ka telesarize
Eleman(w).pdf 1633 Edge banding ka telesarize Kopi Lien Ka telesarize
 
An ka izini jirali
 

Nafa minnu bɛ Edge banding la.


1747794226418

Lɔgɔ suman/Gloss haute/Matte/Finish métallique Plastique Edge banding

Lɔgɔ suman Edge banding : .

Lɔgɔ kisɛ dawolo bandi dabɔra walasa ka jiri nafama cogoya ladege. A ka c’a la, a bɛ dilan ni PVC walima ABS ye, a bɛ sɛbɛn ni jiri misaliw ye ani tuma dɔw la a bɛ kɛ ni sɛbɛnni ye walasa ka kɛ tiɲɛ ye.
Lɔgɔ cogoya lakika – a bɛ mebɛriw ka cɛɲi nafama bonya.
Patɔrɔn suguya caman – a bɛ bɛn lamini, finimugu, walima melamini panɛri fanba ma.
A bɛ mɛn ani a bɛ se ka wuli – a bɛnnen don dakun kurulenw walima dakun tilennenw ma.
Ladonni dɔgɔyali – a saniya ka nɔgɔn ka tɛmɛ jirisun lakikaw kan.
 

Gloss sanfɛla Edge banding

Bandingɛ min bɛ kɛnɛya kosɛbɛ, o bɛ i n’a fɔ filɛlikɛlan, a ɲɛ bɛ manamana min bɛ mebɛriw kɛ bi cogo la, u bɛ kɛ cogo cɛɲi na. A ka c’a la, a bɛ dilan ni PVC walima akiriliki ye ni a ɲɛda jɛlen ye min lamininen don walima min bɛ bɔ ɲɔgɔn fɛ a sanfɛla la.
A ɲɛda ka ɲi, a ɲɛ ka bon – a dafalen don bi dilanw kama.
UV -resistant – a bɛ kulɛri ni yeelen mara waati kɔnɔ.
Nɔgɔ ni sɔgɔsɔgɔninjɛ tɛ se ka tiɲɛ – a ka ɲi yɔrɔw la minnu ka kan ka saniya tuma caman.
A bɛ bɛn panɛriw ma minnu ɲɛ ka bon kosɛbɛ – a bɛ ɲɛda cogoya dɔ dilan min tɛ fɛn tiɲɛ, min bɛ kɛnɛya.
 

Matte Edge banding

Matte edge banding bɛ ni fini ye min tɛ yeelen bɔ, a bɛ nɔgɔya. O ye sugandili ye min ka di mɔgɔw ye ka ɲɛsin mebɛri dilanni nɔgɔlenw ni cɛɲiw ma. A ka c’a la, a bɛ dilan ni PVC , ABS , walima PP fɛnw ye.
Soft, understated look – a ka ɲi kosɛbɛ minimalist walima klasiki cogoyaw la.
A man teli ka bolokɔniw ni nɔgɔw sɔrɔ – a ladonni ka nɔgɔn.
A bɛ yeelen dɔgɔya – a bɛnnen don baarakɛyɔrɔw ma walima yɔrɔw la minnu ka ɛkran ka gɛlɛn.
Tactile feel ɲuman – surface matte dɔw bɛ soft-touch walima textured.
 

Nɛgɛ fini Edge banding

Nɛgɛ dawolo banding bɛ aluminiyɔmu burusi, nɛgɛ inox walima chrome cogoya ladege. A ka c’a la, o bɔrɔ ninnu bɛ dilan ni PVC walima ABS ye, ni papiye walima nɛgɛ filimu ye min lamininen don u sanfɛla la. 
Industri ani bi cogoya – a bɛ nɛgɛ lakika ladege k’a sɔrɔ a girinya walima a musaka tɛ.
A bɛ mɛn ani a tɛ sɔgɔ – a ka ɲi kosɛbɛ baara kɛli la waati jan kɔnɔ.
A bɛ sɔrɔ warijɛ, sanu, nɛgɛso ani nɛgɛ burusi tonw na
A bɛ ɲagami kosɛbɛ ni galasi, akiriliki ani laminati panɛriw ye
 

Wallis Edge banding  Fɛn minnu bɛ dilan

Wallis ye Edge banding feerekɛla ŋana ye 
WALLIS PLASTIC A bɛ fura kelen di Edge banding suguya bɛɛ ma, an bɛ kiliyan kelen-kelen bɛɛ ka ɲinini kɛrɛnkɛrɛnnenw ɲɛnabɔ ani ka fɛnw bɛrɛbɛn walasa k’u magow ɲɛ.

baarakɛcogo. Edge banding ka

Edge banding bɛ kɛ kosɛbɛ sigiyɔrɔ, jagokɛyɔrɔ ani sigida minɛn suguya caman na
  • <strong><span style='font-size:22px;'>Etagères (Etajɛriw) bilali</span></strong>
Baarakɛcogo ɲuman ani Jogo ɲumanba
SGS-Related Tests ka ɲɛsin Edge banding Strips ma

Wallis-Mun ye Plastiki ye Edge banding

 
Edge banding ye finiko fɛɛrɛ kɔrɔlen ye min bɛ kɛ mebɛri dilanni na walasa ka fɛnw dakunw datugu minnu bɛ kɛnɛ kan i n’a fɔ plywood, MDF (medium-density fiberboard), ani particle board. A tɛ dɔrɔn ka mebɛriw yecogo ɲɛ, nka a bɛ u muɲuli fana ɲɛ ani u ka se ka u kɛlɛ ni ji ye, ka u gosi, ani ka u sɛgɛn don o don. I mana kɛ cuisini kabiniw, biro tabali, finidoncogo, walima feerekɛyɔrɔw, dakunw sirili nafa ka bon walasa ka baarakɛcogo ɲuman ni cɛɲi sɔrɔ.
 
Edge banding bɛ se ka kɛ i n’a fɔ fɛn fitinin dɔ, nka a jɔyɔrɔ ka bon kosɛbɛ mebɛriw bɛɛ lajɛlen ka ɲumanya n’u yecogo la. Ni aw ye edge banding material ni a kɛcogo ɲuman sugandi, o bɛ se ka dɔ fara aw ka fɛn dilannenw nafa kan, u ka muɲuli, ani u ka sugu diyabɔli. I kɛra bololabaarakɛla fitinin ye wo, walima i kɛra bololabaarakɛla ŋana ye wo, ka wari bila dakun bandi fɛɛrɛ ɲumanw na, o nafa ka bon walasa ka mebɛriw dilan minnu bɛ se ka kɛ baarakɛlaw fɛ ani minnu bɛ mɛn.
 
1747794177097
 
 

Plastiki ka fɛnw Edge banding

 
 

Enhanced Aesthetic Appeal (Asthétique Appeal) min bɛ bonya

Edge banding bɛ fini saniyalen, nɔgɔlen ani nɔgɔlen di min bɛ bɛn surface decor ma.
A bɛ sɔrɔ kulɛriw, fɛn dilannenw ani cogoya caman na (jirisunw, kulɛri gɛlɛnw, ani finiw minnu bɛ manamana).
 

Lakanali ka bɔ tiɲɛniw na

Aw bɛ panɛriw da sɔgɔlenw datugu walasa ka ji, nɔgɔ ani tiɲɛni bali.
A bɛ dɔ bɔ mebɛriw sɛgɛnni ni u sɔgɔli la, kɛrɛnkɛrɛnnenya la, mɔgɔw bɛ taa yɔrɔ minnu na walima minnu bɛ baara kɛ kosɛbɛ.
 

A ka muɲuli kɛcogo ɲɛna

A bɛ pankurun dakun barikamaw barika bonya ani ka dɔ bɔ sɔgɔsɔgɔninjɛ, tilali walima funu na.
A bɛ mebɛri minnu dilannen don ni jiriw ye minnu dilannen don ni ɛntɛrinɛti ye, olu si janya.
 

Laminiko kɛlɛli

Edge band caman tɛ funteni, kemikɛli ani ji kɛlɛ, u ka ɲi kosɛbɛ dumunikɛyɔrɔw, sanuyasow ani birow la.
 

Fɛn dilanni min musaka ka dɔgɔ

A bɛ a to fɛn dilannikɛlaw ka baara kɛ ni fɛn kolomaw ye minnu sɔngɔ ka gɛlɛn (i n’a fɔ particleboard) k’a sɔrɔ u bɛ se ka ɲɛda cogoya ɲuman sɔrɔ hali bi.
 
1748313575860
 

Plastiki baarakɛcogo Edge banding

 
Plastiki dawolo bandi bɛ kɛ kosɛbɛ bi minɛnw dilanni na ani sokɔnɔna masirili porozɛw la. O bɔrɔ ninnu bɛ kɛ walasa ka jirisunw dawolow datugu ani k’u lakana i n’a fɔ particule board, MDF, ani plywood, o bɛ kɛ sababu ye ka u ɲɛda kɛ cogo dafalen na ani ka diya u cɛɲi ye. Plastiki dawolo bandi bɛ sɔrɔ fɛn suguya caman na, i n’a fɔ PVC , ABS , ani Akiriliki, u kelen-kelen bɛɛ ka jogo kɛrɛnkɛrɛnnenw bɛ bɛn sigida ni dilan magow ma minnu tɛ kelen ye.
 

Biro Mebɛriw

Baarakɛyɔrɔw ni tabali/ Dosiyɛriw ni fɛnmarayɔrɔw/ Lajɛso tabali
Plastiki dakunw bandi bɛ kɛ kosɛbɛ biro kɔnɔfɛnw na i n’a fɔ tabali, kabiniw, tilayɔrɔw, ani fɛn marayɔrɔw. A:
A bɛ finimugu saniyalen di min bɛ kɛ ni baarakɛla ye.
A bɛ dɔ fara a ka se ka don o don sɛgɛn ni sɛgɛnbaliya kunbɛn.
 

Cuisini kabiniw ani Sanuyaso Vanities

A bɛ se ka ji, waji ani funteni kɛlɛ kosɛbɛ.
Ladonni ni saniya nɔgɔn—kɛrɛnkɛrɛnnenya la, a nafa ka bon yɔrɔw la minnu ɲiginnen don.
 

So kɔnɔ minɛnw

Kabini ni finidoncogo/ Etajɛriw ni gafebonw/ Telewisɔn jɔyɔrɔw ni ɲɛnajɛyɔrɔw/ Cuisini jatebɔlanw ani sanuyaso fɛnw
Lakanali ni nkɔni nɔgɔlenw nɔgɔyali ye.
Yecogo ni dilancogo basigilen ye.
A ka ɲɛnamaya jan kɛ ni mebɛriw lakanani ye ka bɔ tigɛtigɛ ni u bɔli la.
 

Kalan ni baaradaw ka minɛnw

Lakɔlisow la, gafemarayɔrɔw la, laboratuwaraw la, ani kalansow la, plastiki dawolo bandi bɛ kɛ bawo:
A bɛ sɔrɔ kulɛri jɛlenw na, minnu tɛ mɔgɔ tɔɔrɔ, minnu tɛ baga ye (kɛrɛnkɛrɛnnenya la ABS ).
A bɛ se ka sɔgɔsɔgɔ ni sɛgɛnbaliya kɛlɛ, a bɛnnen don sigidaw ma minnu bɛ baara kɛ kosɛbɛ.
A bɛ se ka sigida ni kɛnɛya sariyaw labato so kɔnɔ fiɲɛ hakɛ la.
 

Jago ni feerekɛyɔrɔw ka fɛnw

Display racks and counters/ Reception desks/ Partition panels
Kɛrɛnkɛrɛnnenya la, acrylique edge banding bɛ fini jɛlen di, min bɛ i n’a fɔ gilasi, min dafalen don walasa ka fɛnw jira minnu nafa ka bon maganw kɔnɔ ani ɲɛjiraliw la.

 
1747724938534

Jɛkafɔ taabolo

PVC ABS Akiriliki Edge banding Ɲininkaliw

  • Yala PETG fɛrɛ Filimu bɛ se ka kɛ kɛnɛma minɛnw ye wa?

    Ɔwɔ, PETG fɛrɛ Filimu bɛnnen don kɛnɛma minɛnw baara ma. A ka se ka waati sɛgɛn ani UV a ka se ka fɛnw sɔrɔ, o b’a kɛ sugandili ɲuman ye minɛnw kama minnu dilannen don walasa ka kɛnɛyako muɲu. PETG ka muɲuli b’a to kɛnɛmafɛnw bɛ to ka ɲɛ ani u jɔcogo ka ɲi waati jan kɔnɔ.

  • PETG fɛrɛ Filimu bɛ nafa jumɛnw di mebɛri baarakɛcogo la?

    PETG fɛrɛ Filimu bɛ nafa caman jira ni a bɛ kɛ mebɛriw kɔnɔ. A ka jɛya danmadɔ bɛ dɔ fara mebɛriw ɲɛda cɛɲi kan, ka kɛ sababu ye ka u ɲɛda cogoya ɲɛnama ni bi ta ye. Ka fara o kan, PETG ka bɔgɔdaga kunbɛnni bɛ muɲuli sabati, o b’a to a bɛnnen don mɔgɔw bɛ taa yɔrɔ minnu na kosɛbɛ. Ka fara o kan, o fɛn dilannen bɛ kɛ ni funteni ye nɔgɔya la, o bɛ kɛ sababu ye ka dilancogo gɛlɛnw kɛ ani ka fɛnw kɛ ka kɛɲɛ ni mɔgɔw sago ye mebɛri dilanni na.

  • Yala PETG fɛrɛ Filimu bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

    Ɔwɔ, PETG fɛrɛ Filimu bɛ se ka segin ka kɛ fɛn wɛrɛ ye. Segin-ka-bɔ-yɔrɔ minnu bɛ sɔn PET plastikiw ma, olu bɛ PETG fana baara. A nafa ka bon ka PETG faranfasi ka bɔ fɛn wɛrɛw la sani u ka segin u cogo kɔrɔ la. O kɛli fɛ, o fɛnw bɛ se ka labɛn kokura ka kɛ fɛn suguya caman ye, o bɛ kɛ sababu ye ka sigida sabati.

  • PETG fɛrɛ Film ka baarakɛcogo fɔlɔw ye mun ye?

    PETG fɛrɛ Filimu bɛ baarakɛcogo sɔrɔ izini suguya caman na k’a sababu kɛ a ka baarakɛcogo caman ye. Baara minnu bɛ kɛ tuma caman na, olu ye sannikɛyɔrɔ jiralanw ye, taamasiyɛnw, furakɛli minɛnw foroko ani ɲɛda tangalanw. A ni sɛbɛnnikɛlan fɛɛrɛw bɛ bɛn ɲɔgɔn ma ani a dilanni nɔgɔya, o b’a to a ye sugandili ɲuman ye porozɛw kama minnu bɛ ɲɛnajɛko ni baarakɛcogo bɛɛ wajibiya.

  • PETG fɛrɛ Filimu ni plastiki sɛbɛn tɔw tɛ kelen ye cogo di?

    PETG fɛrɛ Filimu bɛ bɔ plastiki sɛbɛn wɛrɛw la k’a sababu kɛ a ka jogo faralen ɲɔgɔn kan cogo kɛrɛnkɛrɛnnen na. PETG tɛ i n’a fɔ laadala PVC walima akiriliki sɛbɛnw, PETG bɛ jɛya danfaralen di k’a sɔrɔ a ma muɲuli tiɲɛ. A fana bɛ se ka sɔgɔsɔgɔ ka tɛmɛ akiriliki kan, wa a bɛ se ka kɛ ni funteni ye nɔgɔya la, o b’a to a bɛ kɛ sugandili ye min bɛ se ka kɛ fɛn caman na izini suguya caman bolo.

  • Yala PETG fɛrɛ farati ka bon Mebɛriw ma minnu bɛ tali kɛ dumuni na wa?

    Cuisini countertops : PETG bɛ se ka kɛ ka cuisini countertops jɛlen walima kulɛrilenw dilan dumuni labɛnni bɛ kɛ yɔrɔ minnu na.
     
    Dumunikɛ tabali : Dumunikɛ tabali minnu bɛ PETG tabali kan, olu farati tɛ dumunifɛnw bilali la k’a sɔrɔ kɛnɛyako haminanko si tɛ u la.
     
    Baro jatebɔyɔrɔw : So kɔnɔ barokɛyɔrɔw walima jagokɛyɔrɔw kama, PETG ye fɛn ye min bɛnnen don barokɛyɔrɔ jatebɔyɔrɔw la, minfɛnw ni dumunifɛn misɛnninw bɛ dilan yɔrɔ minnu na.

  • Nafa jumɛnw bɛ baara kɛ ni PETG fɛrɛ s ye Mebɛri kɔnɔ?

    Muɲuli : PETG sɛbɛnw bɛ se ka sɔgɔ kosɛbɛ, wa u tɛ tiɲɛ nɔgɔya la. O bɛ kɛ sababu ye ka mebɛriw kɛ minnu dilannen don ni PETG ye, olu bɛ mɛn kosɛbɛ ani u bɛ mɛn.
     
    Kɛrɛnkɛrɛnnenya la: PETG sɛbɛnw bɛ ɲɛnayeli jɛlen danfaralen di, i n’a fɔ gilasi. O jɛlenya in bɛ mebɛriw cɛɲi bɛɛ lajɛlen bonya, k’a kɛ fɛn ye min bɛ bɛn bi ni bi dilancogo ma.
     
    A dilanni nɔgɔya : PETG sɛbɛnw bɛ se ka tigɛ nɔgɔya la, ka u kɔrɔta, ka u dilan walasa u ka bɛn mebɛri dilanni wajibiyalen suguya caman ma. O bεε b’a to mebɛriw ɲɛnabɔcogo bɛ se ka kɛ ni daɲɛw ye ani ka kɛɲɛ ni mɔgɔw sago ye.

  • PETG fɛrɛ bɛ baara kɛ cogo di Mebɛriw kɔnɔ?

    PETG sɛbɛnw bɛ baara kɛ mebɛriw la baara suguya caman kama, i n’a fɔ:
     
    Tabali ni jatebɔlanw:
    PETG sɛbɛnw bɛ se ka kɛ ka tabali ni jatebɔlanw dilan minnu bɛ ye walima minnu ɲɛw ye ɲɛgɛnw ye. U ka jɛyaba bɛ bi ɲɛnajɛ ni cɛɲi dɔ fara mebɛriw kan.
     
    Etajɛriw ni jiralanw :
    PETG sɛbɛnw bɛ kɛ tuma caman na walasa ka etajɛriw ni jiralanw dilan feerekɛyɔrɔw ni sow kɔnɔ. U fanga n’u ka kɛnɛya b’u kɛ fɛn ɲumanw ye walasa ka fɛnw ni fɛnw jira minnu bɛ lajɛ.

  • PETG fɛrɛ ye mun ye ?

    PETG (Polyethylene Terephthalate Glycol) sɛbɛn ye plastiki ye min bɛ se ka kɛ fɛn caman na, min bɛ kɛ ka caya mebɛri dilanni na. A lakodɔnnen don a ka jɛya cogo kɛrɛnkɛrɛnnen na, a ka muɲuli, ani a dilanni nɔgɔya.

Izini Ɲininkaliw

Aw ye ɲɔgɔn sɔrɔ anw fɛ
形状结合, Bamako, Mali
形状结合备份, Bamako, Mali
  • <span style='font-size:26px;'><strong>Wechat (Wechat) ye</strong></span>
  • <strong><span style='font-size:26px;'>Linkedin ye</span></strong>
  • <strong><span style='font-size:26px;'>WhatsApp ka baara</span></strong>

Aw ye aw ka Porozɛ daminɛ an fɛ

An ka Quotation ɲuman sirataama
Shanghai Wallis Technology Co., Ltd ye baarakɛla ŋana ye min bɛ ni izini 7 ye walasa ka Plastiki sɛbɛnw, Plastiki filimu, Karti Base Material, Karti suguya bɛɛ, ani Custom Fabrication Service di Plastiki fɛn dilannenw ma.

Fɛn minnu bɛ dilan

Lien teliyalenw

Ka wele
      feereli@wallis-plastic.com kan
   +86 13584305752 ye
  No.912 YeCheng sira, Jiading Industri yɔrɔ, Shanghai
© ƝƐNABƆLI ƝƐNABƆLI 2026 SHANGHAI WALLIS TECHNOLOGIE CO.,LTD. HAKƐLA BƐƐ BƐ SƆRƆ.