|
PP meubles film
Wallis ye baara kɛ
| Kulɛri: | |
|---|---|
| Fɛn min bɛ kɛ: | |
| nafa: | |
| A kɛcogo: | |
| Hakɛ: . | |
Wallis Soft Touch Anti-Fingerprint PP Furniture Film ye poliporopilini decorative surface film ye min dilannen don dumunikɛyɔrɔ kabiniw, finidoncogo, mebɛri panɛriw, kogo panɛriw, biro kɔnɔfɛnw ani bi kɔnɔna baarakɛcogo kama. A ɲɛda super-matte bɛ magali kɛcogo nɔgɔlen dɔ fara ɲɔgɔn kan min bɛ i n’a fɔ velours ni bolokɔnincininw yecogo dɔgɔyali ani bi cogoya saniyalen.
A dabɔra mebɛri dilannikɛlaw kama, panneau laminateurs, kabini iziniw, kɔnɔna-fɛnw tilabaga ani OEM porozɛw, Wallis PP decorative film bɛ sɔrɔ 0,12mm–0,50mm janya la ani 600mm–1400mm bonya la , ni kulɛriw ye minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, matte effects ani roll specifications.
Filimu bɛ se ka jateminɛ kɛ ni lamination fla ye ani ka profil sirili kɛ mebɛri substrates compatibles kan. A ɲɛda dabɔra walasa ka magali nɔgɔlen, bolokɔniw kɛlɛli baarakɛcogo, nɔgɔ kɔrɔlenw kɛlɛli ani don o don ɲɛda sɔgɔli kunbɛncogo ɲuman faralen ɲɔgɔn kan.
Soft-touch ani velours-matte tactile surface
Boloci kuntaalajan furakɛli bɛ dɔ bɔ taamasiɲɛ yetaw ni nɔgɔw la
Super-matte yecogo ni ɲɛnayeli dɔgɔyali ye
0,12mm–0,50mm janya bɛ se ka kɛ
600mm–1400mm bonya bɛ se ka kɛ
Lamination flat ani wrapping baarakɛcogo
Kulɛri solide custom ani surface effects
PP fɛn min bɛ kɛ bi minɛnw ni kɔnɔna yɔrɔw kama
Aw ye PP Film Samples ani Factory Quote ɲini
Filimu laban ɲɛfɔli ka kan ka sugandi ka kɛɲɛ ni mebɛriw dugumalan ye, lamini minɛnw, nɔrɔcogo, yɔrɔ cogoya wajibiyalen ani panɛri dafalen baarakɛcogo. Tablo nata bɛ Wallis ka fɛn dilannenw sugandicogo kunbabaw lajɛ.
| Paramɛtiriw | ɲɛfɔli |
|---|---|
| Minɛ | PP (Poliporopilini) . |
| Fɛn dilannen suguya | Dekoratif meubles surface film |
| Surface Effect (Surface Effect) ye | Soft Touch / Super Matte / Velour Mate ye |
| Fɛn min ye fɛnba ye | Anti-Fingerprint surface furakɛli |
| A ka bon kosɛbɛ | 0,12mm–0,50mm ye |
| Jayan | 600mm–1400mm ye |
| Ɲɛ | Tonw nɛrɛma, gris, beige, neutre ani kulɛri solide customized |
| Baarakɛcogo | Lamination flat / profile wrapping ka kɛɲɛ ni filimu ni poroze ɲɛfɔli ye |
| Scratch Baarakɛcogo | Surface min dabɔra walasa ka se ka a yɛrɛ tanga ka ɲɛ mebɛriw sɛgɛncogo kɔrɔ la; sɛgɛsɛgɛli wajibiyalen ka kan ka dafa poroze in kama |
| Stain Baarakɛcogo | A dabɔra walasa ka du kɔnɔ taamasiɲɛw ni nɔgɔw saniya nɔgɔya la minnu bɛ kɛ tuma bɛɛ |
| Yeelen / UV Baarakɛcogo | UV-resistant (UV-resistant grades) minnu bɛ sɔrɔ ka kɛɲɛ ni ɲɛfɔli wajibiyalenw ye ani sɛgɛsɛgɛli kɛcogo |
| Substrats (Substrats) minnu bɛ Kɛ cogoya la | MDF, particule board, plywood ani mebɛri panneau wɛrɛw minnu bɛ bɛn ɲɔgɔn ma |
| Aplikasiw (applications) minnu bɛ kɛ | Cuisini kabiniw, finidoncogo, kogow, biro kɔnɔfɛnw, lotɛli minɛnw ani finidonlanw |
| Lamini cogoyaw | Polimɛri min sinsinnen bɛ PP kan, kulori tɛ min na; fɔrmadehidi tɛ min na, o ɲɛfɔli ka kɛɲɛ ni fɛn dilannenw ka ɲininiw ye |
| MOQ | A bɛ bɔ a bonya, a bonya, a kulɛri ani a ladamuni wajibiyalenw na |
| Foroko minnu bɛ kɛ | Roll packaging ni export pallet protection bɛ sɔrɔ |
Soft touch PP furniture film ye filimu ye min bɛ kɛ ni poliporopilini ye, min dilannen don walasa ka fini yelen ni fɛn ye min bɛ se ka maga. PP basigilen filimu bɛ finimugu tabaga di, ka sɔrɔ sanfɛla furakɛli bɛ kɛ sababu ye ka yecogo matɛri wajibiyalenw dilan, magali ani bolokɔnincininw kɛlɛli jogo.
Ka kɛɲɛ ni fɛn dilannenw dilanni ye, finimugu jɔcogo bɛ se ka kɛ PP substrat ye, kulɛri walima masirili layɛrɛ, baarakɛcogo dafalen ani kɔfɛla furakɛli min ka kan ka kɛ lamini kɛcogo laɲininen na.
Maga nɔgɔlen bɛ magali hakilina ɲɛfɔ min bɛ sɔrɔ ni mɔgɔ magara minɛnw yɔrɔ dafalen na. Sani a ka kɛ dusukunnata gɛlɛn walima nɔgɔlen ye min bɛ tali kɛ filimu caman na minnu bɛ manamana, o min bɛ kɛ ni matte ye, o bɛ kɛ sababu ye ka fɛn dɔ kɛ min ka nɔgɔn, ka sumaya ani ka kɛ i n’a fɔ velours.
Nin magali jogo in nafa ka bon kosɛbɛ dumunikɛyɔrɔ kabini ɲɛfɛla la, finidoncogo da la, fɛnmarayɔrɔw la ani minɛnw yɔrɔ wɛrɛw la, baarakɛlaw bɛ maga minnu na tuma caman.
Boloci kɛlɛli yɔrɔ dɔ dilannen don walasa bolokɔniw, tulu taamasiɲɛw ani nɔgɔw kana ye kosɛbɛ ka tɛmɛ yɔrɔ kɔrɔlen kan min ma furakɛ. O bɛ mebɛri ɲɛfɛla dibimanw ni super-matte dɛmɛ u ka saniya ka ɲɛ baara kɛcogo la.
Boloci kɛlɛli kɔrɔ tɛ ko bolokɔfɛfɛnw tɛ se ka kɛ abada. Baara kɛcogo bɛ bɔ finimugu, a sanfɛla kulɛri, yeelen, nɔgɔ suguya ani saniya cogoyaw la. Sannikɛlaw minnu ka sɛgɛsɛgɛli wajibiyalenw ɲɛfɔlen don, olu ka kan ka sɔnni sariya wajibiyalen dafa sani u ka dilan.
Super-matte surfaces bɛ yeelen tilennen dɔgɔya ka tɛmɛ finiw kan minnu bɛ manamana, o bɛ kɛ sababu ye ka yecogo nɔgɔya. O yecogo in bɛ sugandi tuma caman na bi dumunikɛyɔrɔw, finidoncogo, sugolanw, birow ani jagokɛyɔrɔw kɔnɔ minnu ka dɔgɔ.
Tactile coating bɛ kɛ sababu ye ka surface dɔ kɛ min bɛ nɔgɔya ani min ka di. Mebɛriw tɔgɔlafɛnw ta fan fɛ, o b’a to finidonlan bɛ se ka fɛn dilannenw cogoya fɔ u yecogo ni u magali fɛ.
Yɔrɔ minnu ɲɛ ye dibi ye, olu bɛ se ka kɛ sababu ye ka tulu ni bolokɔniw kɔlɔsi kɛrɛnkɛrɛnnenya la. Wallis anti-fingerprint PP film dilannen don walasa ka dɔ bɔ o taamasiyɛnw yecogo la ani ka ladonni kɛcogo nɔgɔman nɔgɔya mebɛri ɲɛfɛla la minnu bɛ maga tuma caman na.
A yɔrɔ min datugulen don, o dabɔra walasa ka se ka a yɛrɛ tanga ka ɲɛ ka ɲɛsin sɔgɔsɔgɔninjɛ, sɔgɔsɔgɔninjɛ ani nɔgɔw ma minnu bɛ sɔrɔ mebɛri dilanni na ani don o don so kɔnɔ don o don. Kɛlɛli tigitigi ka kan ka dafa ka kɛɲɛ ni kiliyan ka sɛgɛsɛgɛli fɛɛrɛ wajibiyalen ye ni jatebɔ baarakɛcogo hakɛ wajibiyalen don.
Walasa ka saniya cogo bɛnnen na, aw bɛ finimugu nɔgɔlen dɔ kɛ ni ji ye walima du saniya fura nɔgɔman min bɛ bɛn a ma. Abrasive pads, aggressive solvents, polishing compounds ani kemikali minnu ma kɔrɔbɔ, olu ka kan ka aw yɛrɛ tanga barisa u bɛ se ka matte cogoya Changer walima ka functional coating tiɲɛ.
Kulori tɛ poliporopilini na a ka polimɛri jɔcogo la. O b’a to PP decorative film bɛ kɛ fɛɛrɛ wɛrɛ ye mebɛri dilannikɛlaw bolo minnu bɛ fɛn dɔ fɛ min tɛ PVC ye min tɛ PVC ye.
Wallis PP mebɛri filimu bɛ se ka dilan ka kɛɲɛ ni filimu ɲɛfɔli ye min tɛ foromadeyidi ye ka kɛɲɛ ni fɛn dilannenw ka ɲininiw ye. Sannikɛlaw ka kan k’u hakili to a la ko mebɛri panɛri dafalen dɔ ka fɛnɲɛnamafagalanw bɔli fana bɛ bɔ MDF, fɛnɲɛnamafagalan, nɔrɔlan ani fɛn wɛrɛw la minnu bɛ kɛ panɛri dafalen jɔli la.
PP ye thermoplastique ye min bɛ se ka segin ka kɛ fɛn wɛrɛ ye, yɔrɔ min na, fɛnw lajɛcogo ni a lasegincogo bɛnnenw bɛ sɔrɔ yen. Mebɛri lamininen dafalen ka se ka segin a cogo kɔrɔ la, o ni PP filimu dɔrɔn bɛ se ka segin a cogo kɔrɔ la bawo a jɔcogo dafalen bɛ se ka kɛ fana ni jiri ye, nɔrɔlen, finimugu ani dakun bandi.
PP mebɛri filimu bɛ se ka dɛmɛ don bi kulɛri jɛlenw lajɛlenw na i n’a fɔ nɛrɛ, grafite gri, gris sumalen, beige, krema ani kulɛri wɛrɛw minnu tɛ fɛn wɛrɛ ye. Kulɛriw bɛnni ka kɛɲɛ ni mɔgɔw sago ye, o fana bɛ se ka mebɛri dilannikɛlaw dɛmɛ u ka yɔrɔw dilan minnu bɛ bɛn ɲɔgɔn ma kabiniw, finidoncogo ani kogo-panɛriw lajɛlenw kɔnɔ.
Flat lamination ye PP mebɛri filimu baaracogo kunbaba dɔ ye. Filimu masirilen bɛ siri panɛri labɛnnen dɔ la ni nɔrɔlan ye min bɛ bɛn ɲɔgɔn ma ani lamini minɛnw.
Substrates danmadɔw bɛ se ka kɛ MDF, particle board, plywood ani mebɛri panɛri nɔgɔlen wɛrɛw ye. Panɛli sanfɛla ka kan ka kɛ fla ye, ka saniya ani ka bɛn nɛgɛ sugandilen ni a dilanni taabolo ma.
PP filimu hakɛ bɛnnenw fana bɛ se ka jateminɛ ka ɲɛsin profil sirili ma, mebɛri yɔrɔw ani baarakɛcogo minnu bɛ tali kɛ dakunw na. Filimu sɛgɛsɛgɛli, profil radius, layini teliya, funteni, tansiyɔn ani nɔrɔli sugandili bɛɛ bɛ nɔ bila baarakɛcogo la.
Nɛgɛ sugandilen ka kan ka bɛn PP filimu kɔkanna ni mebɛri substrat fila bɛɛ ma. Hot-melt ani mebɛri-lamination nɔrɔlan wɛrɛw bɛ se ka kɛ ka kɛɲɛ ni minɛnw ni filimu dilanni ye. Kɔrɔbɔli min bɛ kɛ ni fɛn dilanni sira ye, o ka kan ka ban sani ka jagokɛcogo kura dɔ dafa.
Funteni, nɛgɛdaga girinya, tansiyɔn, layini teliya, substrat nɔgɔ ani nɛnɛ cogoya bɛ se ka nɔ bila jɛɲɔgɔnya ni sanfɛla cogoya la. Sannikɛlaw ka kan ka filimu, nɔrɔlan ani panɛri faralen ɲɔgɔn kan yɛrɛ kɔrɔbɔ u dilanni cogoya la.
| Processing Item | Sannikɛlaw ka kan ka min Sɛmɛntiya |
|---|---|
| Substrat (sɔgɔsɔgɔninjɛ). | MDF, particule board, plywood walima panneau wɛrɛw jɔli |
| Lamination Fɛɛrɛ | Lamination plat walima profil enveloppement |
| Nɔrɔlan min bɛ kɛ | Adhesive chimie, a kɛcogo funteni ani a dacogo girinya |
| Baarakɛminɛn | Masina suguya, baarakɛcogo bonya, layini teliya ani rollo cogoya |
| Panneau finilen | Yecogo wajibiyalen, a nɔrɔli, a dakun cogoya ani a sanfɛla baarakɛcogo |
Baro kɛ Aw ka Lamination Process (Lamini kɛcogo) kan
Filimu min bɛ bolokɔnincininw kɛlɛ, n’o ye super-matte ye, o bɛnnen don kɛrɛnkɛrɛnnenya la dumunikɛyɔrɔ kabini da ni fɛnmarayɔrɔ ɲɛfɛ bawo o yɔrɔw bɛ maga tuma caman na. Ni bolokɔfɛfɛnw yecogo dɔgɔyara, o bɛ dibi ni dibi la kabini matɛriw dɛmɛ u ka yecogo saniyalen mara.
Soft-touch PP film bɛ se ka kɛ ka finidoncogo ɲɛfɛ, dilan kɛrɛfɛ minɛnw, fɛnmarayɔrɔ pannew, finidoncogo sitɛmuw ani sugolan marayɔrɔ minɛnw na minnu bɛ fini matte coordinated de wajibiya.
Kulɛri jɛlenw yɔrɔ minnu tɛ yeli kɛ kosɛbɛ, olu bɛ baara kɛ ka ɲɛ ni bi telewisɔnw ye, ni fɛnw bilayɔrɔw ye, ni fɛn marayɔrɔw ye ani ni so kɔnɔ minɛnw ye minnu ka dɔgɔ kosɛbɛ, yɔrɔ minnu na ni kɛnɛya kojugu bɛna u hakili bɔ dilancogo bɛɛ la.
Biro marayɔrɔw, tabali, jatigila jatebɔyɔrɔw, feerekɛyɔrɔw jiralanw ani jagokɛyɔrɔw bɛ se ka baara kɛ ni PP filimu nɔgɔlen nɔgɔlen ye walasa ka baarakɛlaw ka yecogo ni ladonni nɔgɔya fara ɲɔgɔn kan yɔrɔw kan minnu magara tuma caman na.
Wardrobes, vanité mebɛriw, kogo pannew ani lotɛli minɛn minnu bɛ don a kɔnɔ, olu bɛ se ka baara kɛ ni kulɛri mattew ye minnu bɛ bɛn ɲɔgɔn ma walasa ka kɔnɔna dilancogo basigilen dilan dunanw ka so ni foroba yɔrɔw kɔnɔ.
PP masiri filimu fana bɛ se ka lamini kogow kan minnu bɛnnen don, yɔrɔw ani kɔnɔna masirilanw kan yɔrɔ minnu na dilanbagaw b’a fɛ ka yɔrɔ masirilen to senna min ni mebɛri ɲɛfɛyɔrɔw bɛ bɛn ɲɔgɔn ma.
PP, PETG ani PVC bɛɛ bɛ kɛ mebɛriw masirifɛnw ye, nka u fɛnw cogoya n’u baarakɛcogo tɛ kelen ye. Sugandili ɲuman ka kan ka da a kɛcogo kan, a sanfɛla ɲinini, a minɛnw ani a laɲini sugu sanni ka da fɛnw tɔgɔ dɔrɔn kan.
| Factor | PP Meubles Film | PETG Meubles Film | PVC Meubles Film |
|---|---|---|---|
| Polimɛri | Poliporopilini (Polypropylène) ye | Poliyesitɛri min sɛgɛsɛgɛra ni glycol ye | Kuloridi polivinili |
| Dizayina jɔyɔrɔ min bɛ kɛ cogoya la | Bi bi in na, matte, tactile ani non-PVC surfaces | Premium high-gloss walima matte meubles ɲɛfɛ | Broad decorative range ani foroko baarakɛcogo |
| Soft Touch / bolokɔnincinin kɛlɛli | A bɛ sɔrɔ ni finimugu baarakɛta ye | A bɛ sɔrɔ ni finimugu baarakɛta ye | A bɛ sɔrɔ surface systems sugandilenw kɔnɔ |
| Lamination Flat (Lamination) ye min bɛ kɛ | Min bɛ bɛn | Min bɛ bɛn | Min bɛ bɛn |
| Profil / Forming Seko ni dɔnko | A bɛ bɔ PP ka kalasi ni profil jateminɛ na | A bɛ bɔ filimu jɔcogo n’a baarakɛcogo la | A bɛ kɛ ka caya ka ɲɛsin finimugu ni membrane baara ma |
| Sugandili ɲuman bɛ bɔ a la | Material preference, matte surface ani baarakɛcogo | Premium yecogo ani foroko wajibiyalen kɛrɛnkɛrɛnnenw | Design range, baarakɛcogo ani poroze wajibiyalenw |
Mebɛri kulɛri minnu bɛ fɔ kosɛbɛ, olu ye nɛrɛ, charbon, graphite gris, gris sumalen, beige, crème ani ton neutre wɛrɛw ye. Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka baro kɛ ka da kiliyanw ka kunnafoniw kan walima misaliw kan minnu dagalen don.
A minɛcogo ni a yecogo bɛ se ka ladilan ka kɛɲɛ ni minɛnw dilanni wajibiyalen ye. Sannikɛlaw ka kan ka sɔn yecogo ni magali fila bɛɛ ma ni farikolo ta ye bawo foto nimɔrɔma tɛ se ka kɛnɛya hakɛ walima magali cogoyaw lasegin ka ɲɛ.
Wallis bɛ a janya di ka bɔ 0,12mm na ka se 0,50mm ma ani a bonya bɛ bɔ 600mm na ka se 1400mm ma. Hakɛ labanw ka kan ka bɛn lamini layini ma, panɛri dafalen bonya ani fɛnw baaracogo wajibiyalenw.
Kuru janya, a kɔnɔna, a taamasiyɛn ani a palɛti pakew bɛ se ka baro kɛ ka kɛɲɛ ni fɛn dilanni sira minɛcogo ye, fɛnmarayɔrɔw ka ɲininiw ani diɲɛ kɔnɔ bolifɛnw.
Super-matte furniture porogaramuw ka kan ka baara kɛ ni misali ye min dagalen don walasa ka yecogo yecogo ɲɛfɔ min sɔnna. Yeelen cogoyaw bɛ se ka nɔba bila kɛnɛyako ye min bɛ ye, kɛrɛnkɛrɛnnenya la yɔrɔ nɛrɛma ni yɔrɔ jɛman dibimanw kan.
Aw bɛ farikolo master sample dɔ mara min dagalen don walasa ka kulɛriw kɛ minnu bɛ kɛ ka kɛɲɛ ni aw sago ye ani ka segin ka komandi kɛ. Mebɛriw lajɛlen minnu bɛ panɛriw ni dakunw bandiw fara ɲɔgɔn kan, olu fana ka kan ka kulɛriw ka jɛɲɔgɔnya sabati fɛn suguya caman ni ɲɔgɔn cɛ.
Boloci kɛlɛli baarakɛcogo ka kan ka jateminɛ yɔrɔ dafalen kan ni a minɛcogo ni a saniyacogo lakikaw ye. A ka c’a la, kulɛri dibimanw bɛ yecogo sɛgɛsɛgɛli kɛ min ka gɛlɛn kosɛbɛ.
Ni porozɛ dɔ bɛ mebɛri sariya kɛrɛnkɛrɛnnen dɔ wajibiya walima ni jatebɔ bɛ kɛ ni sɔgɔsɔgɔninjɛ, sɔgɔli, kemikɛli walima nɔgɔ-kɛlɛ hakɛ ye, aw bɛ sɛgɛsɛgɛli kɛcogo di sani aw ka komandi kɛ walasa fɛn dilannenw ɲɛfɔli wajibiyalen ka se ka jateminɛ.
Nɔrɔli ka kan ka sɛgɛsɛgɛ ni kiliyan ka MDF walima pankurun lakika ye, nɔrɔli, lamini masin ani baarakɛcogo. Surface performance dɔrɔn tɛ se ka sirili cogoya bɛnbaliw musaka bɔ.
| Sɛgɛsɛgɛlifɛn | Ladilikan Dafalen |
|---|---|
| Ɲɛ | Aw bɛ a suma ni master sample dagalen ye |
| Matte Finish ye | Aw bɛ yecogo kelen-kelen lajɛ yeelen bɛnkan kɔnɔ |
| Soft Touch (Maga nɔgɔlen) ye | Aw bɛ sɔn tactile reference sample ma |
| Anti-Fingerprint (Boloci kɛlɛli). | Aw bɛ taamasiyɛn yetaw jateminɛ panɛri dafalenw kan minnu ye cidenw ye |
| Surface Defects (yɔrɔko nafamafɛnw). | Aw bɛ bɛn danw ma taamasiɲɛw, fɛnɲɛnamafagalanw, sɔgɔsɔgɔninjɛw ani finimugu nafamaw kan |
| Lamination (Lamini) ye | Aw bɛ bonding, bubbles, wrinkles ani edge quality lajɛ |
| Roll Quality ye | Aw bɛ a bonya, a wulicogo, a kurulenw dawolo ani a foroko lajɛ |
Wallis bɛ mebɛri masiri filimuw di kabini dilannikɛlaw ma, pannew laminatɛriw, mebɛri iziniw, kɔnɔnafɛnw tilabaga ani porozɛ baarakɛlaw. Fɛn dilannenw yiriwali bɛ se ka kɛ filimu hakɛw ye, u sanfɛla finiw, u kulɛriw, u baarakɛcogo bɛnkan ani u foroko bɔli jamana wɛrɛw la.
Mebɛri porogaramu kura kama, misali jateminɛni ni lamini sɛgɛsɛgɛliw bɛ fɔ ka sɔrɔ ka hakɛ san walasa kiliyan ka se ka kulɛri, magali nɔgɔlen, bolokɔnincininw kɛlɛli baarakɛcogo ani jɛɲɔgɔnya sɛgɛsɛgɛ fɛn dilanni sira laɲininen kan.
Wallis bɛ baara kɛ ni kiliyanw ye minnu bɛ filimu masirilen wajibiya walasa ka mebɛriw dilanni segin-segin, ka sigida porogaramuw kɛ ka kɛɲɛ ni mɔgɔw sago ye ani ka diɲɛ kɔnɔ fɛnw dilan. Ni aw bɛ poroze segin-ka-bɔnyew kɛ, aw bɛ filimu kode min dabɔra, farikolo kulɛri misali, yɔrɔ ɲɛfɔli ani panɛli-lamini paramɛtiriw mara walasa ka se ka kɛ siniko ɲɛnabɔli ye.
Kunnafoni minnu bɛ sɔrɔ kiliyanw fɛ ani u dilanni dɔnniya bɛ se ka dɛmɛ don ka finiko cogoya n’a baarakɛcogo jateminɛ, nka sannikɛla kuraw ka kan ka PP filimu sugandilen kɔrɔbɔ hali bi n’u yɛrɛ ka panɛri ye, n’u ka nɔrɔlan ye, n’u ka minɛnw ye ani u ka jogoɲiniw sanni u ka dilan caman na.
| Kunnafoni Fɛn | minnu ka kan ka di |
|---|---|
| Waleyali | Cuisini kabini, finidoncogo, kogo panɛri, biro kɔnɔfɛnw walima baara wɛrɛw |
| Substrat (sɔgɔsɔgɔninjɛ). | MDF, particule board, plywood walima panneau sample kɔrɔlen |
| A ka bon kosɛbɛ | Filimu janya wajibiyalen ka bɔ hakɛ la min bɛ sɔrɔ |
| Jayan | A wajibiyalen don ka baara kɛ ni roll width ye |
| Ɲɛ | Kulɛri standard walima farikolo taasibila misali |
| Kɛnɛ | Soft touch, super matte, velours matte ani anti-fingerprint wajibiyalen |
| Baarakɛcogo | Lamination plat walima profil enveloppement |
| Nɔrɔlan min bɛ kɛ | Adhesive system ani masin kunnafoniw minnu bɛ yen ni olu bɛ sɔrɔ |
| Se | Sɛgɛsɛgɛli, nɔgɔ, kemikali, UV walima sɛgɛsɛgɛli sariya wɛrɛ wajibiyalen don |
| Hakɛ | Misali wajibiyalen ani sanni hakɛ makɔnɔnen |
Aw ye aw ka PP Meubles Film Requis ci
O ye poliporopilini masiri filimu ye min ɲɛ ye matɛri ye min bɛ baara kɛ, min dilannen don walasa ka magali nɔgɔlen dɔ dilan ani bi cogoya min tɛ kɛnɛya dɔgɔya mebɛriw kan, kabini ɲɛfɛ, finidoncogo ani kɔnɔna masirilanw kan.
Baarakɛyɔrɔ dabɔra walasa bolokɔniw, tulu taamasiɲɛw ani nɔgɔw kana ye kosɛbɛ ka tɛmɛ yɔrɔ kɔrɔw kan. O kɔrɔ tɛ ko a sanfɛla tɛ se ka kɛ taamasiyɛn ye abada.
Filimu masirilen si man kan ka fɔ ko a tɛ se ka sɔgɔ pewu. Wallis PP filimu bɛ se ka don o don sɔgɔsɔgɔninjɛ kɛcogo ɲuman kunbɛn ka kɛɲɛ ni dugukolo sanfɛla cogoya ye, nka fɛn nɔgɔlenw ni masin fanga tɛmɛnen bɛ se ka sanfɛla tiɲɛ hali bi.
Wallis bɛ soft touch PP mebɛri filimu di ka bɔ 0,12mm na ka se 0,50mm ma. A janya bɛnnen bɛ bɔ panɛri kɛcogo la, lamini kɛcogo la, a bɛ se ka fɛn caman sɛgɛsɛgɛ cogo min na ani a kɛcogo wajibiyalen.
A bonya bɛ Se ka Kɛ milimɛtɛrɛ 600 fo milimɛtɛrɛ 1400 ɲɔgɔn ye. Sannikɛlaw ka kan ka laminati bonya ni panɛri hakɛ dafalenw di minnu bɛ se ka baara kɛ ni u ye ni u bɛ quotation ɲini.
Awɔ. MDF ye fɛn ye min bɛ kɛ ka caya ka ɲɛsin mebɛri-filimu masirilenw ma. MDF sanfɛla, primer ni a mago bɛ a la, adhesive ani laminating paramètres ka kan ka bɛn PP film sugandilen ma.
Particle board, plywood ani mebɛri panɛri wɛrɛw minnu bɛ bɛn ɲɔgɔn ma, olu fana bɛ se ka jateminɛ. Yɔrɔ nɔgɔlen ni sabatilen nafa ka bon barisa fɛn minnu tɛ kɛ ka ɲɛ, olu bɛ se ka ye fɛn masirilen filimu dafalen fɛ.
Nɔrɔli sugandili bɛ bɔ filimu kɔkanna na, panɛli substrat ani lamini minɛnw na. Sannikɛlaw ka kan k’u ka sisan nɔrɔli ni u dilanni taabolo di walasa bɛnkan ka se ka jateminɛ. Layini kɔrɔbɔli ka ɲi sani a ka kɛ caman ye.
PP ka kalasi sugandilenw bɛ se ka jateminɛ kɛ ka ɲɛsin baarakɛcogo ma min bɛ kɛ ka fɛnw siri. Profil radius, film thickness, temperature, adhesive ani machine settings ka kan ka sɛgɛsɛgɛ walasa ka mebɛri yɔrɔ tigitigi dɔn.
Aw bɛ finimugu nɔgɔlen dɔ kɛ ni ji ye walima saniyalan nɔgɔman min bɛ bɛn a ma. Aw bɛ aw yɛrɛ tanga ɛponjiw ma minnu bɛ sɔgɔsɔgɔ, furaji barikamaw, sizow, polisiw ani furakisɛw minnu ma kɔrɔbɔ, minnu bɛ se ka finimugu matirili caman Changer.
Wallis PP filimu bɛ se ka dilan ka kɛɲɛ ni filimu ɲɛfɔli ye min tɛ foromadeyidi ye. Nka, minɛnw panɛli dafalen dɔ ka foromadehidi bɔli fana bɛ bɔ jiriw la, nɔrɔlan ani fɛn wɛrɛw la minnu bɛ kɛ ka fɛn dilannenw dilan.
Poliporopilini bɛ se ka kɛ fɛn ye min bɛ se ka segin ka kɛ fɛn wɛrɛ ye yɔrɔ min na, fɛn wɛrɛw kɛcogo bɛnnenw bɛ yen. Panɛli lamininen dafalen seginni bɛ se ka gɛlɛya ka tɛmɛn fɔlɔ kan bawo PP filimu sirilen don jiriw la ani nɔrɔfɛn na.
Awɔ. Kulɛri nɛrɛma, nɛrɛmuguma, beige ani matte wɛrɛw bɛ se ka di, ani kulɛriw bɛnkan min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, o bɛ se ka baro kɛ ni kiliyanw ka kunnafoni ye walima ni farikolo taasibila ye min dagalen don.
Surface effects i n’a fɔ super matte, velvet matte ani soft touch bɛ se ka baro kɛ ka kɛɲɛ ni porozɛ ye. Sannikɛlaw ka kan ka sɔn farikolo yɔrɔ misali dɔ ma bawo magali nɔw tɛ se ka jateminɛ ka ɲɛ ka bɔ fotow dɔrɔn na.
Awɔ. A ka ɲi ka misali sɛgɛsɛgɛli kɛ walasa mebɛri dilannikɛlaw ka se ka kulɛri, u cogoya masirilen, u magacogo, bolokɔnincininw kɛlɛli baarakɛcogo, u nɔrɔli ani u ka laminɛli layini yɛrɛ bɛnkan jateminɛ.
Aw ye baarakɛcogo, substrat, janya, bonya, kulɛri, surface effect, laminating fɛɛrɛ, nɔrɔ kunnafoni, baarakɛcogo sariya wajibiyalen, komandi hakɛ jateminɛlen ani taayɔrɔ jamana di.
Aw bɛ soft touch anti-fingerprint PP mebɛri filimu ɲini kabiniw, finidoncogo, kogo pannew walima mebɛri pankurunw kama wa? Aw ye aw ka kulɛri jiralan, a bonya, a bonya, a substrat, a lamination fɛɛrɛ ani a komandi hakɛ makɔnɔnen ci Wallis ma. An ka jɛkulu bɛ se ka dɛmɛ don ka PP filimu matte specification bɛnnen jateminɛ i ka production line la.
