|
PP mebɛri filimu
Wallis ye baara kɛ
| Kulɛri: | |
|---|---|
| Fɛn min bɛ kɛ: | |
| A bonya: | |
| A kɛcogo: | |
| Hakɛ: | |
Wallis jirikisɛ PP poliporopilini masiri filimu dilannen don mebɛri dilannikɛlaw kama, kabini iziniw, finidoncogo dilannikɛlaw, MDF pannew laminatɛriw, kɔnɔna da dilannikɛlaw, finiko pankurun iziniw, mebɛrifɛnw tilabaga, ani jagokɛyɔrɔ kɔnɔna feerelaw minnu bɛ jiri cogoya lakika wajibiya ni baarakɛcogo caman ye ani fɛn kɛrɛnkɛrɛnnenw minnu bɛ se ka ladilan.
A dilannen don ni poliporopilini fɛn ye ani jiri sumanw sanfɛla fɛɛrɛ masirilen, PP mebɛri filimu bɛ se ka okɛ, noye, teak, ciyɛn, jiri jɛlenw, jiri dibimanw, ani jiri dibimanw, ani misaliw lasegin ka sɔrɔ ka dɛmɛ don matte, embossed, synchronized texture, ani soft-touch surface effects.
Ni a janya bɛ sɔrɔ ka bɔ milimɛtɛrɛ 0,12–0,50 na ani a bonya bɛ bɔ milimɛtɛrɛ 600–1400 na , filimu in bɛnnen don minɛnw panɛriw ma, dumunikɛyɔrɔ kabini da, finidoncogo, kɔnɔna da, kogo panɛriw, sanuyaso minɛnw, biro kɔnɔfɛnw, feerekɛyɔrɔw, ani jagokɛyɔrɔw kɔnɔna masirili.
Demand PP Lɔgɔ sumanw misaliw & Quote
Nin fɛn ɲɛfɔlen ninnu bɛ mebɛri iziniw, laminatɛriw, jɛgɛfeerelaw, ani porozɛ sannikɛlaw dɛmɛ u ka Wallis PP filimu masirilen jateminɛ joona walasa ka jago kɛ.
| Paramɛtiriw | ɲɛfɔli |
|---|---|
| Minɛ | PP (Poliporopilini) . |
| Surface Effect (Surface Effect) ye | Lɔgɔ suman / Mat / Texture |
| A ka bon kosɛbɛ | 0,12 mm – 0,50 mm |
| Jayan | milimɛtɛrɛ 600 – milimɛtɛrɛ 1400 |
| Janya | A kɛra ka kɛɲɛ ni mɔgɔw sago ye |
| Surface Finish (Sufɛla Fini). | Matte / Embossed / Maga nɔgɔlen |
| Baarakɛcogo | Presse à vacuum / Lamination plat (Lamination plat) ye |
| Funteni kunbɛncogo | Duman |
| UV Kɛlɛli | Awɔ |
| Jiko kunbɛnni | Awɔ |
| Aplikasiw (applications) minnu bɛ kɛ | Meubles Panneaux & Intérieur Décoration |
| Laminiko fɛnw | A bɛ se ka segin ka kɛ fɛn wɛrɛ ye / Formaldehyde tɛ a la |
| MOQ | A bɛ bɔ Specifications (Sɛbɛnniw) de la |
Polipropylène Lɔgɔ Film
Polipropylène Lɔgɔ Film
Aw ye aw ka kunnafoni wajibiyalenw ci
PP jirikisɛ masirili filimu ye poliporopilini ye min sinsinnen bɛ mebɛriw sanfɛla la, min dilannen don walasa ka jiri nafama yecogo lasegin ka sɔrɔ ka dɛmɛ don izini mebɛriw laminini ni u sanfɛla masirili la.
Fɛn dilannenw jɔcogo danma bɛ poliporopilini substrat, jirikisɛw dilanni masirilenw, ani farikolo lakanani furakɛli fara ɲɔgɔn kan. A jɔcogo tigitigi ni a laban bɛ se ka ɲɔgɔn ta ka kɛɲɛ ni a kɛcogo wajibiyalen ye, a kɛcogo, a yecogo ani a kɛcogo.
O finimugu in bɛ jiriw lasegin kulɛriw ni cogoyaw la minnu bɛ bɔ jiriw la minnu bɛ bɔ u yɛrɛ la i n’a fɔ okɛ, noye, teak, ciyɛn, jiri jɛlenw ani jiri dibimanw. Sɛbɛnni min bɛ kɛ tuma bɛɛ, o bɛ mebɛri dilannikɛlaw dɛmɛ u ka pankurun caman labɛn ɲɔgɔn fɛ fɛnw lajɛlen kelen kɔnɔ.
Poliporopilini bɛ kɛ filimu fɔlɔ substrat ye ani ka fɛn caman di minnu ka kan ka kɛ walasa ka lamini fla bɛnnenw kɛ, ka u digidigi ni vacuum ye, ka u tigɛ, ani ka mebɛriw sanfɛla baara.
Surface furakɛli bɛ se ka finimugu cogoya ɲɛ ani ka se ka sɔgɔsɔgɔninjɛ, nɔgɔ, ji, saniya ani don o don baara kɛcogo ɲɛ. Fɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ matte, embossed, synchronized texture ani soft-touch effects ye.
Poliporopilini ye fɛnɲɛnamafagalan ye min tɛ kulori sɔrɔ. O b’a to PP finimugu masirilen bɛ kɛ sugandi ye min bɛ bɛn mebɛri dilannikɛlaw ma minnu bɛ fɛɛrɛ wɛrɛw jateminɛ minnu bɛ se ka kɛ fɛn wɛrɛw ye minnu bɛ se ka kɛ finiw ye minnu bɛ kɛ ni kulori ye.
PP bɛ se ka segin ka kɛ yɔrɔ min na, yɔrɔ minnu na, fɛnw lajɛcogo, u tilacogo ani u lasegincogo bɛnnenw bɛ sɔrɔ. Ni mebɛriw ka fɛn dafalenw don, u bɛ se ka segin u cogo kɔrɔ la, o fana bɛ bɔ u jukɔrɔlafɛnw na, u nɔrɔcogo la, u dacogo la, ani u pannew laban jɔli la.
PP filimu masirilen bɛ baarakɛcogo caman fara ɲɔgɔn kan ni finimugu cogoya caman ye ani sanfɛla nɔfɛkow, o b’a to a bɛnnen don mebɛri iziniw ma minnu bɛ kabiniw, finidoncogo, da, panɛriw, kogow sigicogo, ani kɔnɔnafɛnw dilan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
Lɔgɔkisɛ PP filimu bɛ dɛmɛ ka yiri nafama kulɛriw lasegin, suman siraw, nɛgɛw, fɛn dilannenw nɔw, ani masiricogo minnu bɛ kɛ ka sɔrɔ ka yecogo jateminɛlenw di minnu bɛ bɛn ɲɔgɔn ma jagokɛlaw ka minɛnw dilanni na.
Sɛbɛnni masirilenw ni u ɲɛda furakɛli min bɛ kɔrɔsi, olu bɛ mebɛri dilannikɛlaw dɛmɛ u ka dɔ bɔ fɛn caman ɲɔgɔnna na panɛriw ni ɲɔgɔn cɛ ani ka kabini da, finidoncogo, kogo panɛriw ani mebɛri yɔrɔw minnu bɛ tali kɛ o la, olu bɛ bɛn ɲɔgɔn ma.
Lakanali yɔrɔ bɛ dɛmɛ ka a yɛrɛ tanga sɔgɔsɔgɔninjɛ nɔgɔmanw ma ani don o don sɛgɛn ma, minɛnw dilanni, u sigili, u saniya ani so kɔnɔ baara kɛtuma na.
Masirifɛn PP yɔrɔ dilannen don walasa ka ji ni nɔgɔ gansanw kɛlɛ, o bɛ ladonni nɔgɔya kabiniw, finidoncogo, kɔnɔna da, kogo panɛriw, ani so kɔnɔ minɛn wɛrɛw la.
UV -resistant performance bɛ dɛmɛ don ka kulɛri sabatili dɛmɛ sigidaw la minnu bɛ se ka kɛ cogoya la. Sannikɛlaw minnu ka UV sɛgɛsɛgɛli wajibiyalen kɛrɛnkɛrɛnnen bɛ u la, olu ka kan ka sɛgɛsɛgɛli fɛɛrɛ walima sariya wajibiyalen di ni u bɛ misaliw ɲini.
PP filimu masirilen bɛ funteni kunbɛncogo bɛnnen di mebɛriw sanfɛla baarakɛcogo nɔgɔmanw ma. Funteni hakɛ kɛrɛnkɛrɛnnenw ka kan ka dafa ka kɛɲɛ ni minɛnw jɔli dafalen ye ani poroze sigida.
PP finimugu masirilen yɛrɛ ɲɛfɔlen don ko foromadehidi tɛ a la. Sannikɛlaw minnu bɛ mebɛriw bɔli dafalenw jateminɛ, olu fana ka kan ka MDF, fɛnɲɛnamafagalanw, plywood, nɔrɔlanw, finiw, ani fɛn wɛrɛw fana jateminɛ minnu bɛ kɛ ka fɛn dilannen dilan.
Oak-inspired patterns bɛnnen don Scandinavie, minimalist, natural, modern, ani bi mebɛriw dilanni ma. A ka c’a la, oak kɛnɛ bɛ fara ɲɔgɔn kan ni kɔnɔna palɛti finman, beige, gris ani neutral ye.
Noye misaliw bɛ jiri ton jugumanw dilan minnu bɛnnen don finidoncogo ma, biro kɔnɔfɛnw, lotɛli kɔnɔna, kabini ɲumanw, jagokɛyɔrɔw, ani kɔnɔna labɛncogo dibimanw.
Filimu minnu bɛ kɛ ni teak ni ciyɛn ye, olu bɛ dilancogo nafama wɛrɛw di da, kogow, minɛnw ɲɛfɛ, feerekɛyɔrɔw, biro kɔnɔfɛnw, ani kɔnɔna masirifɛnw.
Matte PP filimu bɛ finimugu nɔgɔlen dɔ di, min tɛ yeli kɛ kosɛbɛ bi minɛnw dilanni na, yɔrɔ minnu na, ɲɛda min bɛ mɔgɔ minɛ, o de ka fisa.
Embossed surface treatment bɛ tactile texture fara decorative film kan, o bɛ mebɛri panneaux dɛmɛ u ka se ka yecogo ni farikolo cogoya caman lasegin minnu bɛ tali kɛ jiriw la.
Sinkɔrɔnise texture laɲini ye ka tactile surface pattern bɛn kosɛbɛ ni printed wood grain design ye, ka yecogo ni magali kɛcogo dɔ dilan min bɛ bɛn ɲɔgɔn ma kosɛbɛ.
Fɛn minnu bɛ kɛ ni magali nɔgɔlen ye, olu bɛ se ka kɛ sababu ye ka magali kɛcogo nɔgɔman di kabini fisamanw ma, finidoncogo, mebɛri ɲɛfɛla, ani panɛri masirilenw.
PP minɛnw labɛncogo dafalen bɛ bɔ sigida dafalen na, i n’a fɔ filimu masirilen, pankurun dugumalan, nɔrɔlan, sanfɛla labɛnni, lamini minɛnw, degun, funteni, a dakunw, ani a sigicogo labanw.
PP filimu masirilen bɛ se ka jateminɛ kɛ ka ɲɛsin minɛnw substrates ma minnu bɛ bɛn ɲɔgɔn ma i n’a fɔ:
MDF ka tɔnba
Particule board (particule board) ye
Plywood (Plywood) ye
Mebɛriw bɛ kɛ ni jiriw ye
Tablo de décoration composites compatibles
Substrat wɛrɛw sɛgɛsɛgɛra PP filimu nɔrɔli la
Wallis PP mebɛri filimu bɛ dɛmɛ don vacuum presse ni fla lamination baarakɛcogo la. Baarakɛcogo paramɛtiriw ka kan ka sugandi ka kɛɲɛ ni filimu janya ye, a jukɔrɔla, a nɔrɔlen, a pankurun jateminɛcogo, a minɛnw, a funteni, a tansiyɔn, ani a cogoya dafalen wajibiyalen.
Vacuum pressing bɛ se ka kɛ kabini da ni mebɛri yɔrɔw la minnu bɛ bɛn ɲɔgɔn ma, yɔrɔ minnu na filimu ka kan ka tugu panɛri cogoyaw la, a dakunw na, walima yɔrɔw cogoya la. Profil gɛlɛnw ka kan ka sɛgɛsɛgɛ sani u ka jago kɛ.
Lamini fla bɛnnen don MDF panɛriw ma, fɛnɲɛnamafagalanw, plywood, kogo panɛriw, mebɛri fla yɔrɔw, ani pankurun wɛrɛw minnu bɛ bɛn ɲɔgɔn ma, minnu bɛ mago ɲɛ masirili kɛcogo ɲuman na.
Lamini kɔfɛ, pankurun dafalenw bɛ se ka tigɛ ka baara kɛ ka kɛɲɛ ni mebɛri dilanni wajibiyalenw ye. Dawolo furakɛli ka kan ka kɛ ka kɛɲɛ ni panɛri jɔcogo ye, a kɛcogo ani a labɛncogo.
Mebɛri iziniw ka kan ka filimu ni pankurunw faralen ɲɔgɔn kan minnu bɛ mɔgɔ jira, olu kɔrɔbɔ sani u ka dilan kosɛbɛ walasa ka nɔrɔli, u dilanni kɛcogo, u kulɛri, u kɛcogo, u dawolo baaracogo, ani u panɛli dafalen cogoya dafa.
Baro kɛ Aw ka Lamination Process (Lamini kɛcogo) kan
PP jirikisɛ filimu bɛ se ka kɛ kabini da, fɛnmarayɔrɔ ɲɛfɛ, kɛrɛfɛlanw, fɛnmarayɔrɔw, ani dumunikɛyɔrɔ minɛnw yɔrɔ wɛrɛw la minnu bɛ bɛn ɲɔgɔn ma, yɔrɔ minnu na jiri cogoya basigilen ani saniya nafama ka kan ka kɛ yɔrɔ minnu na.
Oak, noix, jiri dibiman, jiri jɛlenw, ani PP filimu minnu dilannen don ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka yɔrɔw di minnu bɛ bɛn ɲɔgɔn ma, ka ɲɛsin finidoncogo da ma, finidoncogo, fɛnmarayɔrɔw, kabiniw, ani sugolan marayɔrɔ minɛnw ma.
Lɔgɔkisɛ PP finimugu masirilen bɛ se ka jateminɛ kɔnɔna da yɔrɔw ni da pankurunw na ni filimu ɲɛfɔli, a duguma, a nɔrɔlan ani a baarakɛcogo bɛ bɛn ɲɔgɔn ma ka ɲɛ.
PP filimu masirilen bɛ se ka jateminɛ sanuyaso vanity surfaces ani mebɛri yɔrɔw la ni u farala ɲɔgɔn kan ni panɛri jɔli bɛnnen ye, ni jibɔlanw ye, dakunw datugucogo, ani sigicogo.
Filimu min bɛ i n’a fɔ jiri PP o bɛ se ka kɛ ka ɲɛsin panɛri masirilenw ma minnu bɛ bɛn ɲɔgɔn ma, ka ɲɛsin kogow ma minnu bɛ kɛ ni fɛnw ye, yɔrɔw, kɔnɔna finiw, sow, lotɛli, birow, feerekɛyɔrɔw, ani jagokɛyɔrɔ wɛrɛw.
Buruw, fɛnmarayɔrɔw, fɛnmarayɔrɔw, lajɛso kɔnɔfɛnw, yɔrɔw, ani biro fɛn wɛrɛw bɛ se ka baara kɛ ni jiri sumanw masirili filimu ye walasa ka baarakɛlaw ka kɔnɔnafɛnw dilan minnu bɛ bɛn ɲɔgɔn ma.
PP filimu bɛnnen don jiralikɛnɛw, jatebɔyɔrɔw, fɛnw bilayɔrɔw, butikiw, jiralifɛnw, lotɛli minɛnw, kɔnɔnafɛnw, ani jago porozɛw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
PP , PVC , PETG , ani jiriforo nafama kelen-kelen bɛɛ nafa tɛ kelen ye. Mebɛri sanbagaw ka kan ka baarakɛcogo, u cogoya, sigida magow, substrat bɛnkan, dugukolo sanfɛla baarakɛcogo, poroze baarakɛnafolo, ani baara laban cogoyaw suma ɲɔgɔn na sani u ka fɛn laban sugandi.
| Fɛn | minnu bɛ kɛ ni fɛnw ye minnu bɛ kɛ cogoya la | Mebɛriw sugandili jateminɛ |
|---|---|---|
| PP Filimu dekoratif | Poliporopilini min tɛ kulori ye, a bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye, mebɛriw dilanni bɛ se ka wuli | A bɛnnen don sannikɛlaw ma minnu bɛ PP fɛnw ni masirifɛnw sɛgɛsɛgɛli bila jɔyɔrɔ fɔlɔ la |
| PVC Filimu min bɛ kɛ ka fɛnw masiri | Filimu decoratif flexible sigilen ni kulɛriw ye minnu ka bon ani mebɛriw baarakɛcogo | A ka ca a la, a bɛ kɛ ka fɛnw siri, ka membrane pressing ani ka mebɛriw masiri |
| PETG Filimu dekoratif | PETG -based decorative surface ni fini sugandili caman | A bɛnnen don mebɛriw sanfɛla ɲumanw ma ka kɛɲɛ ni baarakɛcogo wajibiyalenw ye |
| Natural Lɔgɔ Veneer | Lɔgɔ lakika sanfɛla ni a kulɛri dafalen ani suman caman ɲɔgɔnna | A bɛnnen don ni jiri nafama lakika yecogo ye wajibi fɔlɔ ye |
Aw bɛ okɛ, noye, teak, ciyɛn, jiri jɛman, jiri dibiman, walima fɛn dilannenw sugandi ka kɛɲɛ ni minɛnw dalajɛlen ye ani kɔnɔna cogoya laɲini.
Wallis bɛ 0,12–0,50 mm janya suganditaw di. A janya bɛnnen ka kan ka sugandi ka kɛɲɛ ni lamini fla ye, ka kɛɲɛ ni vacuum press wajibiyalenw ye, panɛri jateminɛcogo, a minɛcogo, ani yɔrɔ dafalen jigiyaw.
A bonya bɛ sɔrɔ milimɛtɛrɛ 600–1400 na. Sannikɛlaw ka kan ka filimu bonya bɛn u ka panɛri hakɛw ma, u laminicogo, tigɛcogo, ani u dilanni nafama wajibiyalenw.
Mati, embossed, synchronized wood grain, ani soft-touch surfaces bɛ yecogo ni magali kɛcogo wɛrɛw dilan. Misaliw ka kan ka jateminɛ sani ka sɔn mebɛriw lajɛli ma.
Aw bɛ a jira ni aw ka izini bɛ baara kɛ ni lamini fla ye, ni a bɛ baara kɛ ni fɛnɲɛnamafagalan ye, ka a dawolo baara, walima ni fɛɛrɛ wɛrɛ ye walasa filimu jɔcogo bɛnnen ka se ka jateminɛ.
Sannikɛlaw bɛ se ka baro kɛ okɛ, noye, teak, ciyɛn, jiri jɛlen, jiri dibiman, marbre, finiw labɛncogo, ani porozɛ kɛrɛnkɛrɛnnenw masiricogo kan.
Panɛli farikoloma, misali misali, ja, minɛnw dilanni, walima laɲini kulɛri di ni i bɛ baro kɛ yiriwali kan min bɛ kɛ ka kɛɲɛ ni i yɛrɛ sago ye.
Surface suganditaw bɛ se ka kɛ matte, embossed texture, synchronized wood grain, soft touch, ani decorative effects wɛrɛw ye ka kɛɲɛ ni poroze ka wajibiw ye.
A janya bɛ milimɛtɛrɛ 0,12–0,50 kɔnɔ ani a bonya bɛ milimɛtɛrɛ 600–1400 kɔnɔ, o bɛ se ka sugandi ka kɛɲɛ ni a dilanni kɛcogo ye ani a ɲɛfɔcogo minnu bɛ sɔrɔ.
Rollo janya bɛ se ka ladilan ka kɛɲɛ ni a dilanni, a minɛcogo, a foroko dilanni ani a komandi wajibiyalenw ye.
Foroko suguya minnu bɛ sɔrɔ, olu ye roll pakew ye ani palɛti pakew minnu bɛ kɛ ka kɛɲɛ ni komandi ni bolifɛnw ye minnu bɛ taa ni u ye jamana wɛrɛw la.
Demand Custom PP Filimu yiriwali
Mebɛri pannew dilannikɛlaw
Cuisini kabini iziniw
Wardrobe dilannikɛlaw
Kɔnɔna da dilannikɛlaw
MDF ka pankurun laminiw
Panneau decoratif iziniw
Kogo pannew dilannikɛlaw
Mebɛri filimu tila-tilabagaw
Kɔnɔna masirifɛnw feerelaw
Fiyeere feerelaw dilannikɛlaw
Lotɛli kɔnɔfɛnw feerelaw
Jagokɛlaw ka sokɔnɔna baarakɛlaw
RFQ dafalen bɛ dɛmɛ ka misali sugandili ni quotation waati surunya. PP mebɛri filimu kama, sannikɛlaw bɛ ladilikan di u ma u ka:
Lɔgɔ misali: oak, noix, teak, ash, jiri jɛlen, jiri dibiman, walima ladamucogo.
Kulɛri: aw bɛ jaw, farikolo ta fan fɛ, walima panɛriw di minnu dabɔra ni a bɛ se ka kɛ.
Surface fini: matte, embossed, synchronisé texture, soft touch, walima wajibi wɛrɛ.
A bonya : aw bɛ hakɛ wajibiyalen jira milimɛtɛrɛ 0,12–0,50 hakɛ la min bɛ se ka kɛ.
Bonya : aw bɛ bonya wajibiyalen jira milimɛtɛrɛ 600–1400 hakɛ kɔnɔ min bɛ se ka kɛ.
Kuru janya : aw bɛ aw ka fɛn dilanni walima a foroko wajibiyalen di aw ma.
Substrat: MDF, particule board, plywood, walima mebɛri panneau wɛrɛw.
Baarakɛcogo: vacuum presse, flat lamination, walima fɛn dilanni fɛɛrɛ wɛrɛ.
A kɛcogo: kabini, finidoncogo, da, kogo panɛri, minɛnw, walima jagokɛyɔrɔ kɔnɔna.
Hakɛ: jateminɛ kɛlenw ka kan ka kɛ misali ye ani jagokɛlaw ka komandi hakɛ.
Yɔrɔ min bɛ taa: fɛnw lase jamana walima sugu laɲinilen.
Aw ye Wholesale PP Film Quote sɔrɔ
Misali sɛgɛsɛgɛli b’a to mebɛri dilannikɛlaw bɛ se ka filimu, pankurun, nɔrɔlan, baarakɛcogo, a sanfɛla cogoya, ani panɛri dafalen baarakɛcogo faralen ɲɔgɔn kan cogo dafalen na sani u ka se ka jago kɛ.
Lɔgɔ sumanw kulɛri tiɲɛni
Patɔrɔn ni sɛbɛnni cogoya
Mate walima soft-touch surface effect
Filimu janya ni a bonya
Nɔrɔli substrat sugandilen na
Vacuum pressing baarakɛcogo yɔrɔ minnu na a mago bɛ a la
Lamination flat baarakɛcogo
Edge ni corner jogo ɲuman
Sɔgɔsɔgɔninjɛ ni nɔgɔw kɛlɛli
Panɛli yecogo dafalen poroze yeelen jukɔrɔ
Wallis bɛ PP mebɛri filimu di ka fara mebɛri sanfɛla fɛn wɛrɛw kan dilanbagaw, laminatɛriw, tilabagaw ani jago porozɛ sanbagaw ye. Ladamuni masiricogo, u bonya, u kɛcogo, u foroko, ani u dilanni wajibiyalenw bɛ se ka baro kɛ ka kɛɲɛ ni baarakɛcogo ye.
Walasa ka poroze jateminɛ ka ɲɛ, i ka filimu misali kɔrɔlen di, minɛnw panɛli, fɛɛrɛko ɲɛfɔli, a dilanni taabolo, a hakɛ, ani sugu laɲinitaw di n’i bɛ kuma Wallis fɛ.
Fɛn dilannenw ni sosiyete sɛbɛnw bɛ se ka B2B sannikɛlaw dɛmɛ feerekɛlaw ka setigiya ni poroze jateminɛ waati. Ni aw ka sugu bɛ sɛgɛsɛgɛli rapɔɔri kɛrɛnkɛrɛnnenw wajibiya, seereyaw, fɛn dantigɛlenw sɛbɛnw, walima sariya labatoli kunnafoniw, aw bɛ sariya wajibiyalen di ni aw bɛ quotation ɲini.
Wallis bɛ dɛmɛ don mebɛri dilannikɛlaw ma minnu bɛ baara kɛ kosɛbɛ, pannew laminibagaw, jɛgɛfeerelaw, feerekɛlaw, ani poroze sannikɛlaw minnu bɛ jago hakɛw ni fɛnw ɲɛfɔ minnu bɛ kɛ ka kɛɲɛ ni u yɛrɛ sago ye.
Masiri sira minnu bɛ sɔrɔ, olu ye oke, noix, teak, ash, jiri jɛman, jiri dibiman, matte, embossed, synchronized texture, soft touch, marbre, fabric-inspired patterns, ani customized designs.
Sannikɛlaw bɛ se ka baro kɛ a bonya, a bonya, a kurukuru janya, a ɲɛda cogoya, a cogoya, a kulɛri, a foroko, ani a kɛcogo kɛrɛnkɛrɛnnenw.
PP filimu bɛ se ka sugandi ka kɛɲɛ ni vacuum press ni flat lamination kɛcogo ye min bɛ bɛn ka kɛɲɛ ni mebɛri panɛri dilancogo n’a dilanni sira ye.
Sampling (sampling) bɛ kɛ sababu ye ka fɛn dilannikɛlaw dɛmɛ u ka se ka finiko cogoya, fɛnw ɲɛfɔcogo, substrat bɛnkan, ani baarakɛcogo jateminɛw dafa sani u ka se ka fɛn caman dilan.
PP jirikisɛ masirili filimu ye poliporopilini ye min dilannen don ni jiri yecogo sɛbɛnnenw ni furakɛlilenw ye kabiniw, finidoncogo, da, mebɛri panɛriw, kogow, ani kɔnɔna masirili kama.
Wallis bɛ PP filimu masirilen di a janya la ka bɔ milimɛtɛrɛ 0,12 na ka se milimɛtɛrɛ 0,50 ma. A janya bɛnnen bɛ bɔ a kɛcogo la, a baaracogo la, a kɛcogo la, a kɛcogo la, ani a kɔnɔfɛnw panɛli dilanni na.
A bonya bɛ sɔrɔ milimɛtɛrɛ 600 na ka se milimɛtɛrɛ 1400 ma. Sannikɛlaw ka kan k’u ka panɛri hakɛ, u ka fɛn dilanni minɛnw, u tigɛcogo, ani u ka baarakɛyɔrɔ bonya wajibiyalen fɔ ni u bɛ quotation ɲini.
Awɔ. MDF ye mebɛri substrat ye min bɛ kɛ tuma caman na ka ɲɛsin filimu masirilenw lamini ma. Filimu, MDF sanfɛla, nɔrɔlan, funteni, tansiyɔn, minɛnw, ani baarakɛcogo misaliw ka kan ka bɛn ɲɔgɔn ma ani ka kɔrɔbɔ sani u ka dilan jamaba la.
Particule board ni plywood fana bɛ se ka jateminɛ i n’a fɔ substrates ka kɛɲɛ n’u sanfɛla cogoya ye, u nɔrɔli bɛnkan, u dilanni kɛcogo, ani u ka minɛnw wajibiyalenw.
Awɔ. Nin fura in ɲɛfɔlen don vacuum press ni flat lamination baarakɛcogo la. Siginiden gɛlɛnw, jirisun jugumanw, walima nkɔni sirilenw ka kan ka kɔrɔbɔ ni u bonya ni u baaracogo laɲininen ye sani u ka jago kɛ.
Awɔ. Lamini fla ye baara kɛcogo fɔlɔ dɔ ye PP filimu masirilen na, wa a bɛnnen don MDF, particule board, plywood, ani mebɛri panɛriw ma minnu bɛ bɛn ɲɔgɔn ma.
Dilancogo sira minnu bɛ sɔrɔ, olu ye okɛ, noye, teak, ciyɛn, jiri jɛlen, jiri dibiman ani fɛn dilannenw ye minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Baro bɛ se ka kɛ fana masirifɛnw kan minnu bɛ kɛ ni marbre ni fini ye.
Awɔ. Sannikɛlaw bɛ se ka farikolo tacogo misaliw, jaw, minɛnw pannew, kulɛriw jiracogo, walima dilancogo hakilinaw di walasa ka misali ni kulɛriw jateminɛ minnu bɛ kɛ ka kɛɲɛ ni u yɛrɛ sago ye.
Surface suganditaw ye matte, embossed texture, synchronized wood grain, soft-touch finish, ani decorative effects wɛrɛw ye minnu bɛ kɛ ka kɛɲɛ ni poroze ka ɲininiw ye.
Lakanali yɔrɔ datugulan dabɔra walasa ka se ka sɔgɔsɔgɔninjɛ ni mebɛriw sɛgɛncogo ɲɛ. Sannikɛlaw minnu mago bɛ sɛgɛsɛgɛli kɛrɛnkɛrɛnnen na min bɛ se ka sɔgɔsɔgɔ, olu ka kan ka sariya min bɛ sirataama, olu di misali jateminɛ waati la.
Ɔwɔ, fura in ɲɛfɔlen don ni a ɲɛda baarakɛcogo ye min bɛ se ka ji minɛ. Mebɛri panɛri dafalen ka ji kunbɛncogo fana bɛ bɔ a jukɔrɔla, a nɔrɔlen, a dakunw, a jogindaw ani a sigicogo la.
Poliporopilini bɛ se ka segin ka kɛ yɔrɔ min na, yɔrɔ minnu na, fɛnw lajɛcogo ni u lasegincogo bɛnnenw bɛ yen. Mebɛri panɛri dafalen dɔ seginni bɛ bɔ fɛnw jɔli dafalen na ani sigida lasegincogo infɔrɔmasiko la.
PP finimugu masirilen yɛrɛ ɲɛfɔlen don ko foromadehidi tɛ a la. Formaldehyde minnu bɛ bɔ minɛn dafalenw na, olu fana ka kan ka jateminɛ kɛ pankurun dugumalan, nɔrɔlan, finimuguw ani fɛn wɛrɛw la.
Awɔ. A ka ɲi ka misali sɛgɛsɛgɛli kɛ walasa sannikɛlaw ka se ka jirikisɛ kulɛri, a sanfɛla cogoya, a bonya, a substrat bɛnkan, a bɛ se ka kɛ ni vacuum pressing walima flat lamination baarakɛcogo ye, ani panɛri dafalen cogoya jateminɛ.
MOQ bɛ bɔ a bonya, a bonya, a cogoya, a sanfɛla furakɛli, a kulɛri ladamulen, a rollo janya, ani a dilanni wajibiyalenw. Aw ye kuma Wallis fɛ ni aw ka fɛnw ɲɛfɔcogo ye walasa ka MOQ min bɛ tali kɛ o la, o dafa.
Aw bɛ jiri cogoya wajibiyalenw di, u kulɛri, u sanfɛla labɛncogo, u bonya, u bonya, u kurukuru janya, u jukɔrɔla, u baaracogo, u kɛcogo, u hakɛ, u taayɔrɔ jamana, ani sɛgɛsɛgɛli kɛrɛnkɛrɛnnen walima u foroko kɛrɛnkɛrɛnnenw.
Ni aw bɛ PP jirikisɛ masiri filimu sɔrɔ MDF kama, dumunikɛyɔrɔ kabiniw, finidoncogo, kɔnɔna da, mebɛri panɛriw, kogo panɛriw, biro kɔnɔfɛnw, walima jago kɔnɔnafɛnw , aw ka i ka misali, a bonya, a bonya, a laban, a duguma, a baaracogo, a hakɛ, ani a taayɔrɔ sugu ci Wallis ma.
An ka jɛkulu bɛ se ka baro kɛ PP mebɛri filimu ɲɛfɔli bɛnnenw kan, jirikisɛw labɛnni ka kɛɲɛ ni mɔgɔw sago ye, misali sɛgɛsɛgɛli, pakew dilanni, ani caman dilanni na aw ka mebɛri dilanni porozɛ kama.
