|
Wallis -PLA ƒe agbalẽ
| Amadede: | |
|---|---|
| Agbɔsɔsɔ: | |
| Nusi wotsɔ wɔe: | |
| Dɔwɔwɔ: | |
| viɖe: | |
| Agbɔsɔsɔ: | |
WALLIS custom PLA card sheet material nye nusi wowɔ na card wɔlawo, agbalẽtalawo, RFID inlay converters, nunana-kaɖi dzralawo kple sustainability-focused card programs siwo le bio-based alternative dim na PVC substrates dzɔdzɔewo. Tiatia siwo li dometɔ aɖewoe nye ɣi, si me kɔ, yevu kple amadede ƒe agbalẽ siwo wowɔ ɖe ɖoɖo nu le dzidzenu geɖe me na nu vevi siwo wota, nusiwo wotsɔ tsyɔ wo dzi, boblododogbalẽviwo, hamevinyenye ƒe agbalẽviwo, amedzrodzeƒe ƒe safuigbalẽviwo kple RFID xɔtuɖoɖo tiatia aɖewo.
PLA kaɖi wɔwɔ zãa dɔwɔwɔ ƒe fesre si to vovo tso PVC, PETG kple polycarbonate gbɔ. Ele be woaɖo kpe agbalẽtata ƒe nuŋlɔtsi, anyigbadzidɔwɔwɔ, agbalẽ ƒe nɔnɔme, lamination ƒe dzoxɔxɔ, nyaƒoɖeamenu, fafa, adhesive tiatia, die cutting kple finished-card dodokpɔ dzi be wonye ɖoɖo ɖeka. Wokafu kpɔɖeŋu dodokpɔwo hafi woawɔ nu geɖe, vevietɔ na multilayer, RFID, magnetic-stripe kple long-service-life card dɔwo.
'Bio-based,' 'biodegradable,' 'industrially compostable' kple 'recyclable' ɖɔa nutome ƒe nɔnɔme vovovowo. Ele be nya ɖesiaɖe si woagblɔ la nasɔ kple PLA ƒe dzeside tututu kple agbalẽvi si wowu enu ƒe xɔtutu bliboa. Chips, antennas, inks, overlays, adhesives, magnetic stripes kple coatings ate ŋu atrɔ agbe ƒe nuwuwu mɔ eye ate ŋu axe mɔ na kaɖi si wowɔ vɔ la be wòagadze na compostability claim o.
| Adzɔnu Ƒomevi | PLA kaɖi ƒe nu vevi agbalẽvi, agbalẽ si woate ŋu ata kple dɔa koŋ ƒe kaɖi ƒe nutsyɔnu |
| Titrime Siwo Woɖo Ðe Ðoɖo Nu | 0.08mm, 0.15mm, 0.17mm, 0.20mm kple 0.35mm; gauge bubu siwo ŋu woate ŋu alé ŋku ɖo le ewɔwɔ me |
| Agbalẽvi ƒe Agbɔsɔsɔme si Woɖo Ðe Ðoɖo Nu | 300 × 480mm alo lolome si woatrɔ asi le le agbalẽtata kple kaɖi-ɖoɖo ƒe nudidiwo nu |
| Amadede ƒe Tiatiawɔblɔɖe | Yevu, eme kɔ, translucent, yevu alo amadede si wowɔ ɖe ɖoɖo nu le MOQ kple atikewɔwɔ te |
| Kpekpeɖeŋugbalẽviwo ƒe Dɔbiagbalẽviwo | Nunana, hamevinyenye, nuteƒewɔwɔ, wɔna, amedzrodzeƒe ƒe safui, asitsatsa, boblododo kple RFID kaɖi tiatia aɖewo |
| B2B Dɔwɔƒewo | Kpɔɖeŋu gbalẽviwo, dzidzenu siwo wowɔ ɖe ɖoɖo nu, agbalẽtata dodokpɔwo, lamination dodokpɔ, kaɖi-ɖoɖo me toto, QC ƒe nɔnɔmewo kple dɔdɔ ɖa |
Bia PLA Kpekpeɖeŋugbalẽvi ƒe Kpɔɖeŋuwo kple Nyayɔyɔ
Polylactic acid, si woyɔna zi geɖe be PLA, nye polyester si wotsɔa dzoxɔxɔ wɔe si woate ŋu awɔ tso nuɖuɖu siwo wokpɔna tso numiemiewo me siwo woate ŋu awɔ yeyee me. Le kaɖi wɔwɔ gome la, wotrɔa PLA wòzua agbalẽ gbadza siwo ate ŋu anye nu vevi si wota, atsyɔ̃ɖoɖo ƒe ƒuƒoƒo, ƒuƒoƒo si me kɔ alo kpeɖeŋutɔ si le kaɖi ƒe wɔwɔme si wotsɔ laminated me.
PLA ƒe dzɔtsoƒe si woate ŋu awɔ yeyee menaa kakaɖedzi le eɖokui si be kaɖia anɔ anyi eteƒe nadidi, agbalẽtata alé ɖe nu ŋu alo awɔ gbeɖuɖɔ o. Resin ƒe grade, crystallinity, additives, pigment, sheet orientation kple card wɔwɔe ɖoa mɔ̃ɖaŋu, dzoxɔxɔ kple nutome ƒe nɔnɔme mamlɛawo.
Wotrɔ asi le PLA ƒe nuwɔna geɖewo ŋu na dɔwɔƒewo ƒe gbeɖuɖɔ si dzi wokpɔna kple dzoxɔxɔ, tsidzadza kple yaƒoƒo si dzi wokpɔna. Mele be woagblɔ be PLA gbalẽvi aɖe buna kabakaba le tomenuwo tsɔtsɔ ƒu gbe, anyigba dzrowo, tɔsisiwo alo atsiaƒuwo me o. Ele be woada agbalẽvi si wowɔ vɔ la kpɔ be enye nu blibo hafi azã gbeɖuɖɔ ƒe dzesi alo nusi wogblɔ.
General thermoforming PLA sheet ate ŋu ana flatness, surface roughness, printability alo lamination nuwɔna si hiã na card wɔwɔ o. Ele be nuƒlelawo nabia be woagblɔ kaɖi ƒe dzeside eye woatsɔ woƒe agbalẽtamɔ̃wo, nuŋlɔtsiwo, nusiwo wotsɔ tsyɔa nu dzi kple laminators ado agbalẽvi la tututu kpɔ.
PLA Sheet na Kpekpeɖeŋugbalẽviwo wɔwɔ si Li Eteƒe Didi
| Parameter | Typical Specification / Project Requirement |
|---|---|
| Nu | PLA alo PLA card-grade ƒe atike si wogbugbɔ trɔ; ele be woatsɔ adzɔnu ƒe kɔpi axe resin kple additive package pɛpɛpɛ |
| Eƒe titrime | 0.08, 0.15, 0.17, 0.20 kple 0.35mm alo wowɔe ɖe ɖoɖo nu; ele be woalɔ̃ ɖe mɔɖeɖe ɖe nu ŋu dzi le dzidzenu ɖesiaɖe ŋu |
| Agbalẽvi ƒe Agbɔsɔsɔme | 300 × 480mm alo ɖoɖo si wowɔ ɖe ɖoɖo nu si wotu ɖe imposition, press aba kple lamination plate dzi |
| Tensile Ŋusẽ | Mɔ̃a ƒe mɔfiame ≥25MPa (nufiame ƒe asixɔxɔ); ɖo kpe dodokpɔmɔnu si dzi wolɔ̃ ɖo, nɔnɔmewɔwɔ kple mɔ si le ŋgɔgbe ƒe nudidi dzi na nudɔdɔ ɖesiaɖe |
| Anyigba ƒe Kpekpeme | 0.8–3.0μm ƒe nufiame ƒe didime; tia le agbalẽtata, ink holdout kple lamination ƒe nudidiwo nu |
| Anyigbadzi Nuwuwu | Matte, semi-matte, glossy, corona-treated alo coated printable anyigba si woate ŋu ado kpɔ le dɔwɔwɔ me |
| Amadede | Yevu, si me kɔ, yevu, Pantone si wowɔ ɖe ɖoɖo nu alo opacity-dziɖuɖu ƒe dzeside le atikewɔwɔ kple MOQ te |
| Nuwo babla | Agba gbadzɛ siwo ŋu ametakpɔ film alo interleaving, tsi-mɔxenu packing, kakɛ kple pallet takpɔkpɔ |
Zi geɖe la, wotsɔa ƒuƒoƒo geɖe tua dzesidegbalẽvi si wowɔ vɔ tsɔ wu be woatsɔ agbalẽvi ɖeka si le kpekpem. ISO/IEC 7810 de dzesi ID-1 kaɖi ƒe nɔnɔme si bɔ la le abe 85.60 × 53.98mm ene eye eƒe titrime le ŋkɔ me nye 0.76mm. Ele be PLA layer ƒe ƒuƒoƒo tututu nabu agbalẽtata, adhesive, overlay, chip alo antenna ƒe titrime kple post-lamination shrinkage ŋu.
| Layer | Typical Function | PLA Dɔwɔɖoɖo ƒe Bubu |
|---|---|---|
| Ŋgɔgbe ƒe Nutsyɔnu | Ekpɔa agbalẽtata ta eye wònaa wowua anyigba dzi | Ðo kpe kadodo, eme kɔ, tsitretsitsi ɖe ʋuʋudedi ŋu kple nutome-nyagbɔgblɔ ƒe ɖekawɔwɔ dzi |
| Nu Vevi Si Wota | Etsɔa nɔnɔmetatawo, nuŋɔŋlɔwo, dedienɔnɔ ƒe nɔnɔme kple megbe amadede | Ele be anyigbadzidɔwɔwɔ kple ink ƒe ɖoɖoa natsi agbe le lamination me amadede ƒe tɔtrɔ alo delamination manɔmee |
| Titina ƒe Nu vevi | Tua titrime, opacity kple bending sesẽ | Zã mɔfiame si da sɔ kple xɔtutu si sɔ be nàɖe curl dzi akpɔtɔ |
| RFID Inlay Layer ƒe ƒuƒoƒo | Chip kple antenna le eme hena dɔwɔwɔ si me kadodo mele o | Bu akɔnta le inlay ƒe titrime, antenna ƒe adhesion, chip cavity kple lamination nyaƒoɖeamenu ŋu |
| Megbe Ta Agbalẽvi / Nutsyɔnu | Enaa nɔnɔmetata siwo trɔ megbe kple anyigba dzi takpɔkpɔ | Da sɔ le ŋgɔgbe kple megbe ƒuƒoƒowo me be nàkpɔ didime ƒe tɔtrɔ gbɔ |
Ŋgɔgbe kple megbe ƒe ƒuƒoƒo siwo mesɔ o ate ŋu ana woaƒo xlã wo le dzoxɔxɔ kple fafa vɔ megbe. Le afisi wòanya wɔ le la, zã dzidzenu siwo sɔ, agbalẽtata ƒe nutsyɔnu si sɔ kple nusiwo wotsɔ tsyɔ nu dzi si da sɔ le axa eveawo. Ele be woalé ŋku ɖe agbalẽvi siwo wowɔ vɔ ŋu le wo ɖɔɖɔɖo vɔ megbe, ke menye le wo ɖeɖe vɔ megbe teti ko o.
Ink, adhesive, RFID inlay, magnetic stripe kple ametakpɔnu ƒe nutsyɔnu katã kpena ɖe eŋu wòzua titrime mamlɛtɔ. A nominal sheet stack si ƒe ƒuƒoƒo nye 0.76mm hafi lamination ateŋu mawɔ compliant finished card le compression kple shrinkage megbe o.
| Agbalẽtata ƒe Mɔnu | Zazã si Ate Ŋu Azã | Be Woaɖo Kpeɖodzi |
|---|---|---|
| Offset ƒe Agbalẽtata | Agbalẽ siwo ƒe lolome lolo kple dɔwɔwɔ ƒe amadede, Pantone kple dedienɔnɔ ƒe megbenyawo | Ink ƒe adhesion, ƒuƒu, mɔxexe, amadede ƒe kpekpeme kple lamination tsitretsitsi |
| UV Inkjet ƒe mɔ̃ | Duƒuƒu kpuiwo, ame ŋutɔ ƒe tɔtrɔ, nɔnɔmetata siwo kplɔ wo nɔewo ɖo kple kpɔɖeŋuwɔwɔ | Anyigbadziŋusẽ, dɔyɔyɔ ƒe seƒe, asitɔtrɔ le nɔnɔmewo ŋu, ʋeʋẽ kple nutsyɔnu ƒe kadodo |
| Agbalẽtata le Screen dzi | Opaque ɣi, ga, teƒe amadede kple dɔwɔwɔ ƒuƒoƒo | Ink ƒe titrime, solvent ƒe sɔsɔ, dɔyɔyɔ kple lamination kadodo |
| Indigo / Digitál Agbalẽtata | Nyatakaka siwo trɔna, duƒuƒu kpuiwo kple kaɖi ƒe ɖoɖowɔɖi siwo wowɔ na ame ŋutɔ | Primer ƒe sɔsɔ, blanket dzoxɔxɔ, toner adhesion kple anyime lamination |
| Dzoxɔxɔ / Retransfer Ame ŋutɔ ƒe Nɔnɔme | Finished-card numbering, fotowo, barcodewo kple ɖaseɖigbalẽwo | Dzoxɔxɔ ƒe ʋuʋu, ribbon ƒe asitɔtrɔ, gbadzaƒe kple agbalẽtamɔ̃ ƒe ʋuɖoɖo dodokpɔ |
Corona dɔdamɔnu ate ŋu agblẽ le edzadzraɖo me. Ele be nuƒlela siwo zãa UV inkjet, screen printing alo coatings tɔxɛwo nalɔ̃ ɖe dyne ƒe agbɔsɔsɔ si woɖo taɖodzinu na, dodokpɔmɔnu kple ɣeyiɣi si woatsɔ adzrae ɖo wu hafi ata nu dzi.
Agbalẽtata ƒe adhesion nyuie le gɔmedzedzea me meka ɖe edzi be yeate ŋu anɔ te ɖe dzoxɔxɔ, nyaƒoɖeamenu kple adhesive ƒe kadodo nu o. Ele be woatsɔ laminated agbalẽvi siwo wota, afa wo ahado woƒe lãgbalẽwo kpɔ hafi woada asi ɖe nutatawo kple ink-mɔ̃wo dzi.
PLA Kpekpeɖeŋugbalẽvi si Woate Ŋu Ata
Lamination Kple Dzimetɔtrɔ Dodokpɔwo
Zi geɖe la, PLA fa le dzoxɔxɔ si bɔbɔ wu PVC, PETG alo polycarbonate card nuawo me. PVC lamination nuɖaɖa si wozãna ɖaa ate ŋu ahe ʋuʋu fũ, dzesidede anyigba dzi, tɔtɔ, mɔxexe alo chip ƒe gbegblẽ vɛ. Ele be woato tsatsam nyuitɔ vɛ kple layer stack ŋutɔŋutɔ kple dɔwɔnuwo.
Dzra agbalẽawo ɖo: Dzra PLA agbalẽawo, ƒuƒoƒo siwo wota kple nusiwo wotsɔ de eme la ɖo eye nàda asɔ le dzoxɔxɔ kple fafa si dzi wokpɔ ŋusẽ ɖo te.
Kpe ɖe mɔfiame si le eŋu dzi: Na mɔ̃a kple mɔfiame siwo le tsia dzi nasɔ le ƒuƒoƒoa me be nàkpɔ eƒe ʋuʋu dzi.
Dze egɔme kple dzoxɔxɔ ƒe tsatsam si me wodzraa nu ɖo: Zã dodokpɔ si me dzoxɔxɔ le bɔbɔe wu PVC ƒe tsatsam si sɔ eye nàdzii ɖe edzi ne èlé ŋku ɖe kadodo ƒe ŋusẽ kple eƒe didime ŋu vɔ ko.
Dadasɔ le dzoxɔxɔ, nyaƒoɖeamenu kple nɔƒe: Nyaƒoɖeamenu si gbɔ eme ate ŋu ade dzesi anyigba alo agblẽ nu le RFID ƒe akpawo ŋu; ŋusẽ si mesɔ gbɔ o ate ŋu ahe delamination vɛ.
Fafa le nyaƒoɖeamenu si dzi wokpɔ ŋusẽ ɖo me: Fafa kpɔa ŋusẽ ɖe gbadzaƒe, ʋuʋu kple mɔxexe dzi.
Nɔnɔme hafi woadzidzee: Kpɔ didime, curl, adhesion kple card ƒe titrime le ɣeyiɣi si dzi wolɔ̃ ɖo be woahaya megbe.
Do nuɖaɖa si dzi woda asi ɖo: Ŋlɔ agbalẽ ƒe ƒomevi, stack ƒe ɖoɖo, dzoxɔxɔ ƒe nɔnɔme, nyaƒoɖeamenu, ɣeyiɣi kple fafa ƒe nɔnɔmewo ɖi.
PLA ƒe ƒuƒoƒo aɖewo siwo sɔ ate ŋu abla ɖe wo nɔewo ŋu le dzoxɔxɔ me, gake xɔtunu bubuwo ya hiã be woatsɔ nusi léna ɖe nu ŋu alo ablae. Ele be woada kadodomɔnu si wotia la kpɔ be eƒe lãgbalẽ ƒe ŋusẽ, tsitsi, agbalẽtata ƒe ɖekawɔwɔ kple ŋusẽ si wòkpɔna ɖe nutome ƒe nyagbɔgblɔ dzi hã.
Gloss, matte kple textured plates naa anyigba ƒe dzedzeme vovovowo kple asiɖeɖe le wo ŋu ƒe nuwɔna. Do film siwo woɖe ɖe go kple agba ƒe nuwuwu kpɔ hena sticking, haze, gloss ƒe tɔtrɔ kple texture transfer si womedi o.
| Trɔtrɔ Afɔɖeɖe Safui | Dziɖuɖu |
|---|---|
| Agbalẽvi Guillotine Lãɖeɖe | Sharp blade, supported stack, dzoxɔxɔ sue tutu kple didime ƒe nyateƒetoto |
| Kpekpeɖeŋugbalẽviwo Ƒe Ƒuƒoƒo | Dɔwɔnu ƒe ʋuʋu, dzoxɔxɔ, kaɖi ƒe nɔnɔme kple dzogoe ƒe gbagbã ƒe anyimanɔmanɔ |
| Slot kple Dowo ƒe Punching | Edge whitening, notch sensitivity, do ƒe nɔnɔme kple hanging-agba ƒe tsitretsitsi |
| Chip Do ƒe Milling | Lãɖeɖe ƒe duƒuƒu, dzoxɔxɔ, ke ɖeɖeɖa, do ƒe goglome kple adhesive ƒe kadodo |
| Edge ƒe Dzodzro | Burrs, delamination, cracks, whitening, ɖaƒoƒo kple ƒuƒoƒo ƒe ŋkɔ ŋɔŋlɔ |
Woate ŋu ada PLA kaɖigbalẽa kpɔ be kaɖi siwo ŋu kadodo mele o hã le eme, gake ɖoɖoa ƒe akpa ɖeka koe agbalẽvia nye. Ele be antenna, chip, inlay substrate, adhesive kple lamination ƒe tsatsam nanɔ elektrik kple mɔ̃ me li ke le kaɖi wɔwɔ kple subɔsubɔ katã me.
| Smart Card ƒe Nudidi | ƒe kpeɖodzinu |
|---|---|
| RFID ƒe Frequency kple Chip | Kpe ɖe nuxlẽla ƒe ɖoɖo, chip ƒome, ŋkuɖodzinu, ɖoɖowɔɖi kple encoding ƒe nudidiwo dzi hafi nàtu kpɔɖeŋuwo |
| Antenna ƒe Geometry | Kpɔ egbɔ be kaɖi ƒe nugbɔ, chip ƒe nɔƒe kple lãɖeɖe ƒe ɖoɖo megblẽ antenna la o |
| Inlay ƒe Kadodo | Kpɔ adhesive ƒe ɖekawɔwɔ, dzoxɔxɔ ƒe tsitretsitsi, voids kple delamination ɣeyiɣi didi ɖa |
| Xlẽ Dɔwɔwɔ | Do nuxexlẽ ƒe didime, mɔfiame, kaɖi ƒe ƒuƒoƒo ƒe nutete kple lock/reader ƒe ɖekawɔwɔ kpɔ |
| Nutome Ŋuti Nyagbɔgblɔ | Mègagblɔ be elektrɔnik-kaɖi be woate ŋu awɔ gbeɖuɖɔ bliboe o negbe ɖe woɖo kpe nu bliboa dzi hafi |
| Dɔbiagbalẽvi | Product Focus | Critical Test |
|---|---|---|
| Nunana Kple Nuteƒewɔwɔ ƒe Kpekpeɖeŋugbalẽviwo | Agbalẽtata ƒe nyonyome deŋgɔ, barcode, magnetic stripe alo RFID tiatia | Agbalẽtamɔ̃ ƒe sɔsɔ, gakotoku zazã, eƒe bɔbɔ kple ɖoɖowɔɖia ƒe agbenɔƒe si wokpɔ mɔ na |
| Amedzrodzeƒea ƒe Safuigbalẽviwo | RFID-kaɖi siwo wozãna kpuie siwo ŋu nɔnɔmetata siwo ƒe ŋkɔ woŋlɔ ɖe wo dzi eye woƒe lock-system ƒe ɖekawɔwɔ le | Chip ƒe sɔsɔ, encoding, nuxlẽla ƒe dɔwɔwɔ, fafa kple eŋudɔwɔwɔ enuenu |
| Nudzɔdzɔ Kple Amedzrowo ƒe Kpekpeɖeŋugbalẽviwo | Ɣeyiɣi kpui aɖe ƒe mɔɖeɖe, dzesidede, slot punching kple nyatakaka siwo trɔna | Lanyard agba, agbalẽtata ƒe anyinɔnɔ kple nudzɔdzɔ tsɔtsɔ ƒu gbe mɔ |
| Hamea me tɔwo ƒe Kpekpeɖeŋugbalẽviwo | Kpekpeɖeŋugbalẽvi siwo wota eye wowɔ wo na ame ŋutɔ na klabowo, kamedefefewɔƒewo kple asitsaƒewo ƒe ɖoɖowo | Subɔsubɔ-agbenɔƒe mɔkpɔkpɔ, abrasion, bending kple card-printer ʋuɖoɖo |
| Asitsatsa Kple Dodoɖeŋgɔ ƒe Kpekpeɖeŋugbalẽviwo | Premium nukpɔkpɔ wu enu, nukpɔkpɔ le gaglãgbe, amadede tɔxɛ kple ɣeyiɣi kpui aɖe ƒe ame ŋutɔ ƒe tɔtrɔ | Tata ƒe adhesion, scratch tsitretsitsi, nugbɔ ƒe nyonyome kple nudzraɖoƒe gbadzaa |
| RFID ƒe Mɔnukpɔkpɔgbalẽviwo | Kakaɖedzimademade kaɖi xɔtutu kple inlay si sɔ kple dzoxɔxɔ sue lamination | Elektrikŋusẽ ƒe dɔwɔwɔ, flexing, delamination kple nuxlẽla ƒe sɔsɔ |
Nunana, Hamevinyenye kple Dodoɖeŋgɔ ƒe Kpekpeɖeŋugbalẽviwo
PLA Kpekpeɖeŋugbalẽvi ƒe Ðoɖowo Wu enu
| ƒe | Ŋusẽ | Seɖoƒe Veviwo |
|---|---|---|
| PLA | Bio-based potential, vovototodedeameme ŋutinya kple dɔwɔƒewo-compostability ŋutete na xɔtuɖoɖo siwo ŋu woɖo kpee | Dzoxɔxɔ ƒe tsitretsitsi ɖe anyi, dɔwɔwɔ ƒe seselelãme, brittleness afɔku kple nuƒoƒoƒu ƒe xɔtuɖoɖo siwo seɖoƒe li na |
| PVC si wotsɔ wɔa dɔe | Woɖo kaɖi ƒe ɖoɖo si mexɔ asi o, agbalẽtata kple lamination ŋuti sidzedze si keke ta | Fossil-siwo wotu ɖe, chlorine-siwo me chlorine le kple nusiwo wogbugbɔ zãna si seɖoƒe li na le kaɖi ƒe ɖoɖo geɖe me |
| PETG | Lamination nyui, toughness, transparency kple card-wɔwɔ nyanya | Womate ŋu awɔ gbeɖuɖɔ o eye alesi woatsɔe aƒu gbe nɔ te ɖe nutoa me ƒe nusiwo wogbugbɔ zãna dzi |
| Polycarbonate si wotsɔ wɔa dɔe | Kɔkɔe, dzoxɔxɔ ƒe tsitretsitsi kple alesi wòsɔ na laser engraving | Gazazã si lolo wu kple nusiwo li tegbee/agbe ƒe nuwuwu ƒe nɔnɔme vovovo |
| PVC si wogbugbɔ zã / RPETG | Eɖea ɖetugbui leaƒe-plastic didi dzi kpɔtɔna esime wòléa kaɖi ŋuti dɔwɔwɔ nyanyɛ me ɖe asi | Nusiwo wogbugbɔ zã, amadede, nusiwo mewɔ ɖeka kple nusiwo woate ŋu azã ake hiã kpeɖodzi |
Menye PLA ye nyea nu nyuitɔ kekeake na ɖaseɖigbalẽ ɖesiaɖe le eɖokui si o. Amedzrodzeƒe, amedzro, wɔna, nunana kple boblododo gbalẽvi siwo anɔ anyi ɣeyiɣi kpui aɖe ate ŋu anye ame sesẽ siwo di be yewoaxɔ ɖoƒea. Dziɖuɖu ƒe ID siwo nɔa anyi didi, fexexegbalẽviwo, dzoxɔxɔ ƒe ɖaseɖigbalẽwo kple agbalẽvi siwo hiã laser-kpa ate ŋu ahiã PETG, polycarbonate alo xɔtutu bubu si ŋu woda asi ɖo.
| Nyabiase | B2B Gɔmeɖeɖe Nyuitɔ |
|---|---|
| Bio-Based dzi | Fia carbon ƒe agbɔsɔsɔ si woate ŋu awɔ yeyee eye ele be woatsɔ nusiwo wotsɔ wɔe ƒe nuŋlɔɖiwo alo dodokpɔwo aɖo kpe edzi |
| Dɔwɔƒewo ƒe Compostable | Ebia ɖaseɖigbalẽ na dudzikpɔƒe alo dɔwɔƒewo ƒe aerobic composting nɔnɔme siwo dzi wokpɔna |
| Aƒeme Compostable | Ebia be woaxɔ aƒeme gbeɖuɖɔ ŋuti ɖaseɖigbalẽ si le vovo; dɔwɔƒewo ƒe ɖaseɖigbalẽ xɔxɔ mesɔ gbɔ o |
| Nusiwo gblẽna le nugbagbewo ŋu | Mede blibo ne dodokpɔ ƒe nɔnɔme, mɔnu kple ɣeyiɣi si woɖo ɖi la mele eme o |
| Woate ŋu azãe ake | Le mɔ̃ɖaŋununya gome la, anya wɔ le PLA tɔsisi si woɖo ɖi koŋ me, gake womexɔa kaɖiwo le afisiafi le PET si wozãna ɖaa alo aŋe siwo wotsaka gbugbɔgazã me o |
| Kpekpeɖeŋugbalẽvi ƒe Nubiabia Blibo | Ele be woatsɔ chip, antenna, ink, coating, adhesive kple magnetic stripe ade dodokpɔa me |
PLA gbalẽvi ƒe ɖaseɖigbalẽ mate ŋu aɖo kpe RFID kaɖi, magnet-kaɖi alo kaɖi si wota si ŋu wofa nu ɖo ƒe biabia dzi le eɖokui si o. Elektrɔnik kple ga ƒe akpa aɖewo ate ŋu ahiã be woaɖe wo ɖa, woagbugbɔ wo azã eŋutinunyalawo alo woato mɔ bubu si dzi woato atsɔ wo aƒu gbe.
Dɔwɔƒe geɖe siwo wɔa gbeɖuɖɔwo mexɔa bioplastic-gbalẽvi sesẽwo o. Ele be nya siwo wozãna tsɔ ƒua gbe la naɖe nuƒoƒoƒu ƒe ɖoɖo ŋutɔŋutɔ afia le asi si woɖo taɖodzinu na me tsɔ wu be wòanye nukpɔsusu ƒe nunɔamesi si wotsɔ ƒu gbe.
| Dodokpɔ Nutoa me | Dzodzro |
|---|---|
| Dzidzeme Kple Eƒe Titrime | Didime, kekeme, dzogoe ƒe didime, titrime kple mɔɖeɖe ɖe nu ŋu le nɔnɔmewɔwɔ vɔ megbe |
| Warpage kple Flatness | Curl enumake kple tsitsi le dzoxɔxɔ kple fafa si dzi wokpɔ ŋusẽ ɖo me |
| Layer ƒe Adhesion | Peel, edge delamination, dzoxɔxɔ ƒe tsitsi, fafa ƒe tsitsi kple flexing |
| Bending kple Torsion | Gbugbɔ flexing, torsion, crack formation kple deformation tegbee |
| Dzoxɔxɔ kple Dimensional Like | Nudzraɖoƒe le teƒe siwo dzoxɔxɔ le, agbalẽtamɔ̃ ƒe dzoxɔxɔ kple post-lamination shrinkage |
| Agbalẽtata ƒe Anyinɔnɔ Didi | Rub, scratch, atikewo ƒe kadodo, UV ƒe ɖeɖefia kple overlay adhesion |
| Kpekpeɖeŋugbalẽvi ƒe Ame ŋutɔ ƒe Nɔnɔme | Tsã-ɖe-kaɖi, retransfer, dzoxɔxɔ ƒe asitɔtrɔ, embossing kple encoding dodokpɔwo abe alesi wòsɔ ene |
| RFID / Magnetic Dɔwɔwɔ | Xlẽ/ŋɔŋlɔ, gaƒoɖokui ƒe sɔsɔ, antenna ƒe blibonyenye kple stripe encoding le ewɔwɔ vɔ megbe |
| Dzodzro Nu ƒe | Nyonyome Dzikpɔkpɔ |
|---|---|
| Titrime ƒe Nɔnɔmetata | Gauge le mama dedie nu, tɔtrɔ tso teƒe yi teƒe kple mɔɖeɖe ɖe lot-to-lot ŋu |
| Agbalẽvi ƒe Dzidzemewo | Didime, kekeme, dzogoe ene me, nugbɔ ƒe nyonyome kple lãɖeɖe ƒe mɔɖeɖe |
| Flatness kple Curl ƒe nɔnɔme | Sheet bow, edge lift kple mɔfiame na curl le conditioning megbe |
| Amadede kple Amadede si me mekɔ o | L *, a *, b *, ɣie, opacity, gloss kple nukpɔkpɔ ƒe dzidzenu si dzi woda asi ɖo |
| Anyigba ƒe Nyonyome | Kpekpeme, atikewɔwɔ ƒe seƒe, ʋuʋudedi, teƒe yibɔwo, gel, ɖiƒoƒo kple ametakpɔnu-film ƒe nyonyome |
| Mɔ̃ɖaŋununya ƒe Nɔnɔmewo | Tensile, elongation, stiffness, impact kple brittleness le mɔnu siwo dzi wolɔ̃ ɖo nu |
| Lamination Dodokpɔ | Bonding, shrinkage, haze, blocking, agbalẽtata ƒe liƒo kple agbalẽvi ƒe asiɖeɖe le eŋu |
| Nusiwo woate ŋu akpɔ | Dzeside, batch, extrusion ŋkeke, mɔfiame, atikewɔwɔ ŋkeke, ŋkuléle ɖe nyatakaka kple ɖaseɖigbalẽ reference |
PLA agbalẽ ate ŋu ase dzoxɔxɔ, fafa kple edzadzraɖo ɣeyiɣi didi. Nudzraɖoƒe gbegblẽ ate ŋu atrɔ gbadzaƒe, anyigbadzidɔwɔwɔ, agbalẽtata kple lamination ƒe nuwɔna. Ele be woalɔ̃ ɖe nudzraɖoƒe ƒe nudidiwo dzi le dzeside si tututu woatsɔ ablae kple mɔnu si woatsɔ ablae nu.
Dzra agbalẽ siwo wotu nu ɖo la ɖo ɖe nudzraɖoƒe si fa miamiamia, si le ƒuƒuie eye wòle dzadzɛ me, si me ɣe ƒe keklẽ kple dzoxɔxɔnamɔ̃wo nagage ɖo tẽ o.
Na agbalẽawo nanɔ gbadzaa le pallet siwo wodo alɔe dzi eye nàƒo asa na stack ƒe nyaƒoɖeamenu si gbɔ eme.
Takpɔ anyigbawo ta tso ke, ami, asibidɛwo, ƒoƒo kple tsidzadza me.
Trɔ asi le nusiwo le agbalẽtata alo lamination xɔa me ŋu hafi nàtrɔ asi le wo ŋu.
Zã tsidzadza-mɔxenu babla, dzogoe takpɔkpɔ kple aɖaka siwo ŋu wodo ŋusẽ ɖo siwo wotsɔ ɖoa duta.
Zã nudzraɖoƒe gbãtɔ, gbãtɔ si dona eye nàgalé ŋku ɖe alesi wowɔe le anyigba dzi ŋu le edzadzraɖo ɣeyiɣi didi megbe.
Kaɖi-dɔwɔƒe ƒe susu: Woate ŋu ato agbalẽvi ƒe titrime, eƒe anyigba, agbalẽtata kple ƒuƒoƒo ƒe wɔwɔme me ƒo xlã kaɖi-wɔwɔ ƒe nudidi ŋutɔŋutɔwo.
Gauges kple lolome siwo wowɔ ɖe ɖoɖo nu: Woate ŋu adzro 0.08–0.35mm tiatia siwo wowɔna ɖaa kple agbalẽvi ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu me.
Agbalẽtata kple lamination dodokpɔwo: Woate ŋu ada kpɔɖeŋuwo kpɔ hena offset, UV inkjet, screen, digital tata kple dzoxɔxɔ sue lamination.
RFID dɔa ƒe kpekpeɖeŋu: Woate ŋu ato agbalẽ ƒe xɔtuɖoɖowo me kple inlay ƒe titrime, chip ƒe nɔƒe, antenna kple nuxlẽla ƒe sɔsɔ.
Nutoa me nya siwo ŋu agbanɔamedzi le: Woate ŋu atsɔ nusiwo wotsɔ wɔe ƒe nuŋlɔɖiwo asɔ kple xɔtutu kple asi ŋutɔŋutɔ si wowɔ kple agbalẽvi si wowu enu.
Factory-direct B2B supply: Esɔ na kaɖi wɔlawo, tɔtrɔlawo, agbalẽtalawo, RFID dɔwɔƒewo, nusiwo wotsɔ tso duta vɛ kple mamalawo.
Wowu kaɖi ƒe dɔbiagbalẽvi xɔxɔ nu, subɔsubɔ ƒe agbenɔƒe si wokpɔ mɔ na kple asi si me woayi.
PLA ƒuƒoƒo si hiã: nuto si woate ŋu ata, titina nuto, ƒuƒoƒo si me kɔ alo nusi wotsɔ tsyɔ edzi.
Titrime, mɔɖeɖe ɖe nu ŋu, agbalẽa ƒe lolome, nuku/ɖoɖo kple agbɔsɔsɔ.
White, transparent, black alo custom amadede kple opacity taɖodzinu.
Offset, UV inkjet, screen, Indigo alo agbalẽtata ƒe ɖoɖo bubu kple ink ɖoɖo.
Lamination mɔ̃, fifia nu, dzoxɔxɔ profile, nyaƒoɖeamenu kple agbalẽvi ƒomevi.
Wowu kaɖi ƒe lolome, eƒe titrime kple ISO alo asisiwo ƒe nɔnɔme si wobia.
RFID chip, antenna, inlay ƒe titrime, magnet-ka alo kadodo-chip ƒe hiahiã.
Compostability, bio-based content, REACH, RoHS alo nuŋlɔɖi bubuwo ƒe nudidiwo.
Kpɔɖeŋu agbɔsɔsɔme, ƒe sia ƒe ƒe nyagblɔɖi, melidzeƒe si woɖo tae kple ɖoɖowɔɖi si wobia be woatsɔe ayi na amewo.
Dzro Wò PLA Card Material Project me
Menye nenema kokoko o. Kpekpeɖeŋugbalẽvi wɔwɔ bia be woakpɔ edzi be wòanɔ gbadzaa, eƒe anyigba ƒe ƒuƒuiƒe, amadede, agbalẽtata ƒe adhesion, titrime ƒe mɔɖeɖe ɖe nu ŋu kple lamination ƒe nuwɔna. Bia dzeside si wodo kpɔ hena kaɖi wɔwɔ.
Nusiwo li ƒe titrime siwo wozãna ɖaa dometɔ aɖewoe nye 0.08, 0.15, 0.17, 0.20 kple 0.35mm. Woate ŋu ato gauges siwo wowɔ ɖe ɖoɖo nu me le agbalẽ extrusion, layer structure kple MOQ nu.
Ɛ̃. A standard sheet size nye 300 × 480mm, eye woateŋu adzro nɔnɔme siwo wowɔ ɖe ɖoɖo nu me le nyadzɔdzɔŋlɔlawo ƒe ɖoɖo, kaɖi ƒe ɖoɖowɔwɔ kple lamination dɔwɔnuwo nu.
Woateŋu ada PLA gbalẽviwo kpɔ na ID-1 kaɖiwo, gake ele be woakpɔ 85.60 × 53.98mm kaɖi si wowu enu kple 0.76mm ƒe titrime si woyɔna be 0.76mm le agbalẽtata, lamination, fafa kple punching megbe.
Woate ŋu atsɔ atike si sɔ ɖe anyigba dzi kple nuŋlɔtsi ada offset tata kpɔ. Ele be nuƒlelawo nado ink ƒe adhesion, drying, blocking, color density kple tsitretsitsi ɖe lamination cycle ŋu kpɔ.
Dzeside siwo sɔ siwo ŋu wowɔ atike ɖo alo esiwo ŋu wofa nu ɖo ate ŋu asɔ. Ele be woado ŋusẽ si le anyigba dzi, ink ƒe dɔyɔyɔ, asitɔtrɔ le nɔnɔmewo ŋu, ʋeʋẽ kple nutsyɔnu ƒe kadodo kpɔ le agbalẽtamɔ̃ si woɖo be woawɔ la dzi.
Ðewohĩ woate ŋu azã dɔwɔnuawo, gake mele be woatsɔe be PVC ƒe nuɖaɖa si sɔ o. Zi geɖe la, PLA hiã dzoxɔxɔ ƒe tsatsam si bɔbɔ wu eye wokpɔa edzi nyuie kple nyaƒoɖeamenu, nɔƒe kple fafa si ŋu woda asi ɖo.
Nusiwo gbɔ wòtsona zi geɖee nye dzoxɔxɔ si gbɔ eme, ƒuƒoƒo siwo meda sɔ o, agbalẽa ƒe nɔnɔme si mewɔ ɖeka o, agbalẽtata ƒe nutsyɔnu si mesɔ o, fafa nyuie kple dzidzedze le kaɖia ŋu hafi wòaɖɔ ɖo bliboe.
Ẽ, le dodokpɔwo te. Ele be woatsɔ inlay ƒe titrime, antenna ƒe nɔnɔme, adhesive, chip teƒe, lamination pressure kple reader ƒe ɖekawɔwɔ ade card ƒe wɔwɔme me.
Woate ŋu abu PLA ŋu na amedzrodzeƒe ƒe safuigbalẽvi siwo wozãna kpuie ne woda asi ɖe chip, lock system, agbalẽtata, fafa ƒe ɖeɖefia kple eŋudɔwɔwɔ enuenu dzi hafi wowɔe.
Dɔwɔwɔ nɔ te ɖe dzeside kple xɔtutu dzi. PLA ateŋu asɔ na agbenɔƒe kpui kple titina ƒe agbalẽvi tiatia, gake mele be woasusui be esɔ kple PVC, PETG alo PC le dzoxɔxɔ ƒe tsitretsitsi, ŋusẽkpɔɖeamedzi alo ɣeyiɣi didi ƒe flexing me o.
Standard PLA card sheet mesɔ le eɖokui si na dedie laser engraving o. Laser-ɖe dzesi ƒe atikewo, vovototo, dzoxɔxɔ ƒe ŋuɖoɖo kple kaɖi ƒe anyinɔnɔ bia ɖokuitsɔtsɔna ŋgɔyiyi kple dodokpɔ.
Nya ma nɔ te ɖe nuto si ŋu woɖo kpee kple xɔtutu bliboa dzi. PLA gbadzɛ ate ŋu anye esi woate ŋu atsɔ awɔ gbeɖuɖɔ le dɔwɔƒewo, evɔ ink, nusiwo wotsɔna léa nu ɖe nu ŋu, chips, antennas, flipes alo coatings ate ŋu atrɔ agbalẽvi si wowɔ vɔ ƒe nɔnɔme.
Ne aƒeme gbeɖuɖɔ ŋuti ɖaseɖigbalẽ bubu le agbalẽvi si wowu enu tututu la ŋu ko hafi. Dɔwɔƒewo ƒe gbeɖuɖɔ ŋuti ɖaseɖigbalẽ meɖoa kpe aƒeme gbeɖuɖɔ ƒe nya aɖe dzi le eɖokui si o.
PLA kple PET nye polymer vovovowo eye le dzɔdzɔme nu la, mele be woatsaka o. PLA gbugbɔgazã bia be woawɔ nuƒoƒoƒu ƒe tɔsisi tɔxɛ aɖe, si mele afisiafi na kaɖiwo o.
Woate ŋu aƒo nu tso amadede ɣi, si me kɔ, yibɔ, si me kɔ kple amadede siwo wowɔ ɖe ɖoɖo nu ŋu. Amadede masterbatch ateŋu akpɔ ŋusẽ ɖe agbalẽtata, lamination, mɔ̃ɖaŋudɔwɔwɔ kple ɖaseɖigbalẽ ƒe kekeme dzi.
Dzrae ɖo wòtre nu, gbadzaa eye wòaƒu le nudzraɖoƒe si dzi wokpɔna me le adzɔge tso ɣe ƒe keklẽ kple dzoxɔxɔ gbɔ. Takpɔ anyigbaa ta tso ke, ami, ʋuʋudedi kple tsidzadza, kple nɔnɔme ƒe agbalẽviwo me hafi nàtae.
Ɛ̃. Ele be woata kpɔɖeŋugbalẽviwo, awɔ laminated, afa, aƒo wo eye woatrɔ asi le wo ŋu to ewɔwɔ ƒe mɔnu si woɖo be woawɔ la zazã me hafi woada asi ɖe nusiwo wotsɔ wɔe ƒe nɔnɔme dzi.
MOQ nɔ te ɖe eƒe titrime, agbalẽa ƒe lolome, amadede, eƒe anyigba ƒe dɔwɔwɔ, eƒe nutsyɔtsyɔ, eƒe babla kple nenye be dɔa zã atike si li xoxo si sɔ kple kaɖi dzi.
Na kaɖia ƒe dɔbiagbalẽvi, ƒuƒoƒo ƒomevi, titrime, lolome, amadede, agbalẽtata mɔnu, lamination ɖoɖo, RFID alo fli ƒe nudidiwo, ɖaseɖigbalẽ, agbɔsɔsɔme kple yiyi.
Te ɖe WALLIS Plastic ŋu hena PLA kaɖi ƒe akpa veviwo ƒe agbalẽ siwo wowɔ ɖe ɖoɖo nu, agbalẽ siwo woate ŋu ata kple kaɖi-ƒomevi nuzazãwo na nunana, nuteƒewɔwɔ, amedzrodzeƒe ƒe safui, wɔna, boblododo kple RFID kaɖi ƒe ɖoɖo tiatia aɖewo. Míaƒe ƒuƒoƒoa doa alɔ gauge tiatia, agbalẽtata kple lamination dodokpɔwo, kaɖi-ɖoɖo me toto, nutome nuŋlɔɖiwo, nyonyome ƒe nɔnɔmewo kple dɔwɔƒe- tẽ B2B nana.
