|
wallis
Wallis ye nye esia
| Amadede: | |
|---|---|
| Titrime: | |
| Dɔwɔwɔ: | |
| Agbɔsɔsɔ: | |
Wotrɔ asi le Wallis custom compostable PLA nuɖuɖu fafɛ nuɖuɖu aɖakawo ŋu na salad, atikutsetse, abolomenuwo, deli nuɖuɖuwo, nuɖuɖu fafɛwo kple dzoxɔxɔ-dziɖuɖu ƒe nuɖuɖu tsɔtsɔ yi teƒe bubuwo. Woate ŋu awɔ nugoe siwo me kɔ, siwo ƒe amadede le ɣie alo esiwo ƒe amadede nye esiwo wowɔ ɖe ɖoɖo nu na nuɖuɖumalawo, fiase gãwo, nuɖuɖudzraƒewo, nuɖuɖudzraɖodɔwɔƒewo, nuɖuɖudzraƒewo kple nubablɛdɔwɔƒe siwo ƒe ŋkɔwo le wo ɖokui si.
Standard transparent PLA nye nusi wotsɔ blaa nuɖuɖu fafɛwoe koŋ. Mele be woaɖoe abe xexeame katã ƒe nuɖuɖu dzodzoe, microwave alo oven nugoe ene o. Ele be nuƒlelawo naɖo kpe dzoxɔxɔ si sɔ gbɔ wu si woatsɔ ayɔ nuɖuɖua me, nuɖuɖu ƒe ƒomevi, ɣeyiɣi si woatsɔ adzrae ɖo, nutsyɔnu ƒe nɔnɔme, nufamɔ̃ ƒe nudidi, gbeɖuɖɔ ƒe ɖaseɖigbalẽ kple nuɖuɖu ƒe kadodo ŋuti se siwo le afi si woayi ƒe asi dzi hafi ada asi ɖe nusi wowɔ ƒe ɖoɖo aɖe dzi.
Wallis ate ŋu ato hinged clamshells, nugoe eve siwo ŋu nutsyɔnu le, deli aɖaka siwo le dzogoe ene me, agba goglowo, traywo kple thermoformed formats siwo wowɔ ɖe ɖoɖo nu la me. Woate ŋu atrɔ asi le ŋutete, didime, gli ƒe mama, nukpɔkpɔ le gaglãgbe, nudidi siwo tsi tre ɖe afu ŋu, nuƒoƒoƒu, kakɛ ƒe agbɔsɔsɔ kple ame ŋutɔ ƒe ŋkɔ babla ŋu le dɔwɔnuwo kple nudɔdɔ ƒe agbɔsɔsɔ nu.
| Adzɔnu Ƒomevi | PLA nuɖuɖu fafɛ ƒe aɖaka siwo woate ŋu atsɔ awɔ gbeɖuɖɔe, deli nugoewo, salad aɖakawo kple hinged clamshells |
| Nu | Nuɖuɖu-kadodo PLA alo dɔ tɔxɛ aɖe ƒe ɖaseɖigbalẽ si ŋu woɖo kpee be compostable thermoforming grade |
| Ŋutete ƒe didime si bɔ | Anɔ abe 8–48oz alo metrik ŋutete siwo wowɔ ɖe ɖoɖo nu, le nugoe ƒe geometry kple dɔwɔnuwo te |
| Zãzã Gbãtɔ | Nuɖuɖu fafɛ kple fafɛ, siwo dometɔ aɖewoe nye sabala, atikutsetse, abolomeƒe, deli-nuɖuɖuwo kple nuɖuɖu fafɛ siwo woɖa |
| Trɔ asi le eŋu | Agbɔsɔsɔ, nɔnɔme, ŋutete, xɔwo, amadede, embossing, nutsyɔnu, dzeside kple kakɛwo ƒe babla |
| B2B Kpekpeɖeŋunana | Kpɔɖeŋuwo, nuɖuɖu dodokpɔ, nutsyɔnu-fit dodokpɔwo, dɔwɔnuwo me toto, ɖaseɖigbalẽ ƒe sɔsɔ, QC ɖoɖowɔwɔ kple dɔdɔ ɖa |
Bia PLA Nuɖuɖuɖaka ƒe Kpɔɖeŋuwo kple Nyayɔyɔ
PLA, alo polylactic acid, nye polyester si wotu ɖe nugbagbewo dzi si wotsɔa sukli siwo woɖe tso numiemiewo me wɔna zi geɖe. Le nɔnɔme si me kɔ si me nɔnɔme mele o me la, woate ŋu awɔe le dzoxɔxɔ me wòazu nuɖuɖugoe siwo me kɔ, nutsyɔnu, agbawo kple lãgbalẽgolo siwo naa nukpɔkpɔ si sɔ kple aŋekotoku siwo me kɔ si wozãna ɖaa.
PLA si me kɔ la ɖea mɔ na asisiwo kple dɔwɔlawo be woakpɔ salad, atikutsetse, nuɖuɖu viviwo, abolomenuwo kple nuɖuɖu siwo woɖa le fafa me. Ele be woada asi ɖe ŋku ƒe nyonyome dzi na haze, gloss, tint, teƒe yibɔwo, gels, scratches, forming lines kple condensation behavior.
PLA nugoe si wowɔ nyuie la da sɔ le nusiwo ƒe kpekpeme le sue kple flange ƒe ŋusẽ si sɔ, nutsyɔnu ƒe léle ɖe te, stacking ƒe liƒo kple gbagbã ƒe tsitretsitsi. Dɔwɔwɔ si wowu enu nɔ te ɖe agbalẽdzidzenu, nutata ƒe sɔsɔme, dzogoe ƒe didime, akɔta ƒe nɔnɔme kple gli-titrime mama dzi le ewɔwɔ vɔ megbe.
Standard clear PLA ƒe dzoxɔxɔ ƒe tsitretsitsi seɖoƒe li na. Zi geɖe la, wotiae na nuɖuɖu siwo wotsɔ de fridzi, fafɛ alo esiwo dzi wokpɔ nyuie le xɔme ƒe dzoxɔxɔ me tsɔ wu nuɖuɖu siwo woɖa yeyee, tsi siwo le dzo dam, microwave gbugbɔgafa alo dzodoƒe zazã.
Nuɖuɖu Fafɛ ƒe Nugoe Tiatiawɔblɔɖe
Deli kple Lãmesẽɖaka ƒe Nɔnɔmewo Klɔ
| Nugoe ƒe | Nɔnɔme Dɔdamɔnu ƒe Safui | ƒe Dzesidede Teƒe Si Bɔbɔe |
|---|---|---|
| Clamshell si wotsɔ hinged wɔe | Abolomeƒe, atikutsetse, sabala, sandwich kple nuɖuɖu siwo wotsɔna léa nu | Hinge ɖeɖiteameŋu, tab nutsotso, stacking kple nutsyɔnu ƒe ɖoɖowɔwɔ |
| Deli-nugoe si le dzogoe ene me | Pasta fafɛ, deli salad, atikutsetse siwo wotso kple nuɖuɖu fafɛ siwo woɖa | Nutsyɔnu ƒe léle ɖe te, dzogoe ƒe ŋusẽ, tsi si le dodom ƒe nuwɔna kple atɔwɔwɔ |
| Kplu Goglo si me Nutsyɔnu Le | Salad, yogurt, nuɖuɖu viviwo, atikutsetse kple nuku fafɛ ƒe agbawo | Rim fit, nutsyɔnu ƒe tɔtrɔ, stacking kple spoon clearance |
| Tray kple Nutsyɔnu si me Akpa Eve Le | Asitsaƒewo ɖeɖefia, nuɖuɖu dzadzraɖo ƒe ɖoɖowo kple fiase gãwo me nubablɛwo | Base/lid material ƒe sɔsɔ, nutrenu, ʋuɖoɖo kple asitsatsa |
| Nuɖuɖaka si me Wodzraa Nu le | Bento nuɖuɖu fafɛwo, numeɖenu siwo wotsɔ tsaka kple agba siwo dzi wokpɔna ƒe akpa aɖewo | Compartment volume, divider ŋusẽ kple atitsoga-tsi |
| Tray si Wotsɔ Dzoxɔxɔ ƒe Nɔnɔme Wɔe si Wowɔ Ðe Ðoɖo Nu | Nuɖuɖu siwo ƒe adzɔnu tɔxɛ, abolomeƒe alo asitsaƒe ƒe nubablɛwo | Dɔwɔnuwo, nutata ƒe goglome, gli mama kple packing-line ƒe ɖekawɔwɔ |
Wallis ƒe axa gbãtɔ yɔ eƒe titrime ƒe kekeme si nye 0.2–2mm. Le nuɖuɖuɖaka si wotsɔ dzoxɔxɔ wɔe gome la, agbalẽdzidzenu ɖeɖe mesɔ gbɔ o. Ele be nuƒlelawo nada asi ɖe nutata bliboa, unit ƒe kpekpeme si wowu enu, flange ƒe titrime, dzogoe gli mama, ŋutete, dzidzeme kple stacking dɔwɔwɔ dzi.
| Parameter | Specification kple Nuƒle ƒe Nyatakaka |
|---|---|
| Nu | PLA thermoforming grade si me kɔ alo amadede le kple nuɖuɖu-kadodo kple gbeɖuɖɔ ƒe nudidi siwo woɖe fia le asi nu |
| Ŋutete | Asi ƒe nɔnɔme siwo bɔ la dometɔ aɖewoe nye esiwo ade 8, 12, 16, 24, 32 kple 48oz; woate ŋu ato metrik ŋutete siwo wowɔ ɖe ɖoɖo nu vɛ |
| Dzidzemewo | Didime si wowɔ ɖe ɖoɖo nu × kekeme × kɔkɔme, rim profile, compartment dimensions kple ememe zazã ƒe gbeɖiɖi |
| Amadede Kple Eme Kɔkɔ | Amadede si me kɔ, dzɔdzɔme, ɣi alo esi wowɔ ɖe ɖoɖo nu le resin, pigment, MOQ kple ɖaseɖigbalẽ ƒe kekeme nu |
| Nutsyɔnu ƒe Atsyã | Nutsyɔnu si wotsɔ hinged wɔ ɖekae, nutsyɔnu si woate ŋu aƒo ƒu ɖe vovo, nutsyɔnu gbadzaa, nutsyɔnu si wodo ɖe dzi alo nutsyɔnu si wowɔ ɖe ɖoɖo nu si woɖena fiana |
| Dɔwɔwɔ ƒe Tiatiawɔblɔɖe | Do siwo me wodoa ya le, anti-fog grade, tamper-evident feature, label teƒe kple stacking ribs le kpeɖodzi te |
| Adzɔnu ƒe dzeside | Logo si woŋlɔ ɖe edzi, nusiwo wotsɔ wɔe ƒe kɔpi, gbedasi si wotsɔ ƒua gbe, pepa dzi dzesideŋkɔ, abɔta alo aɖaka si wota |
| MOQ | Enɔ te ɖe dɔwɔnu siwo li fifia, woƒe didime, nusiwo wotsɔ wɔe, amadede, nutsyɔnu, ɖaseɖigbalẽ, babla kple ƒe sia ƒe ƒe nyagblɔɖi dzi |
Agbɔsɔsɔme Kple Nɔnɔme Siwo Wotrɔ Asi Le
Nugoe Kple Nutsyɔnu ƒe Ðoɖo Siwo Sɔ Kple Wo Nɔewo
Nutsyɔnu si dze abe ɖe wòsɔ ene ate ŋu aʋu kokoko le etsɔtsɔ na ame me, agbã le flange la dzi alo atso ɖe rim la ŋu. Ele be woada asi ɖe gɔmeɖoanyi kple nutsyɔnu dzi be wonye ɖoɖo si sɔ kple wo nɔewo to nuɖuɖu ŋutɔŋutɔ, nusi wotsɔ yɔe ƒe kpekpeme, nudzraɖoƒe ƒe dzoxɔxɔ kple ʋuɖoɖo ƒe mɔnu zazã me.
| Nuwuwu ƒe Nɔnɔme | Dodokpɔ si Wobia |
|---|---|
| Snap-On ƒe Rim | Installation ŋusẽ, bliboe nuwɔwɔ, ɖeɖeɖa ŋusẽ kple pop-off tsitretsitsi |
| Hinged Tab ƒe Nuwuwu | Tab ƒe ɖoɖowɔwɔ, ʋuʋu enuenu, hinge ƒe gbagbã kple asiɖeɖe le eŋu le vo me |
| Nuɖuɖu Siwo Me Tsi Le | Tilt, shake, inversion kple delivery dodokpɔwo; mègagblɔ be tsi mate ŋu age ɖe eme kpeɖodzi manɔmee o |
| Tamper-Evident Feature ƒe Nɔnɔme | Kpeɖodzi siwo woate ŋu akpɔ le eʋuʋu vɔ megbe, dzesideŋkɔwo ɖoɖo kple ewɔwɔ ƒe ɖekawɔwɔ |
| Nusiwo Woɖo Ðe Ðoɖo Nu | Compression, nutsyɔnu deformation, glidzaglidza, condensation kple ʋuɖoɖo ƒe ʋuʋu |
Zi geɖe la, wogblɔa PLA nugoe siwo me kɔ si me hoʋiʋli le na nuɖuɖu fafɛ ɖeɖeko, eye wogblɔa alesi woazãe wu le teƒe si gogo 40°C. Dɔwɔwɔ pɛpɛpɛ nɔ te ɖe PLA ƒe dzeside, nugoe ƒe nɔnɔme, gli ƒe titrime kple ɣeyiɣi si woatsɔ akpɔe dzi. Ele be woado nugoe si wowɔ vɔ la kpɔ le dzoxɔxɔ si sɔ gbɔ wu si me wokɔe ɖo, edzrae ɖo kple esi woatsɔe ayi teƒe bubu.
| Nɔnɔme Ðoƒe | si Wokafu |
|---|---|
| Nuɖuɖu Siwo Wotsɔ De Nufamɔ̃ Me | Dɔwɔwɔ gbãtɔ; dodokpɔ eme kɔ, nutsyɔnu ƒe sɔsɔ, tsidzadza kple stacking le taɖodzinu ƒe agbenɔƒe |
| Nuɖuɖu Fafɛ si le Xɔme ƒe Dzoxɔxɔ | Zi geɖe la, esɔ le dzeside si dzi woda asi ɖo kple ɣeyiɣi didi si woatsɔ akpɔe me |
| Dzoxɔxɔ ƒe Kpekpeɖeŋu | Ebia be woawɔ deformation, lid-fit kple migration dodokpɔ le nuɖuɖu ƒe dzoxɔxɔ ŋutɔŋutɔ nu |
| Nuɖuɖu Dzodzoewo Kple Mɔliwo | Womekafu standard clear PLA o; da bagasse, CPLA, PP alo xɔtunu bubu si ŋu woda asi ɖo si te ŋu nɔa te ɖe dzoxɔxɔ nu la kpɔ |
| Microwave-mɔ̃ dzi | Womekafui o negbe ɖe wodo nusi tututu wowɔ vɔ la kpɔ koŋ eye woŋlɔe ɖe edzi be woazãe le microwave me hafi |
| Nufamɔ̃ | Ate ŋu adzɔ be woawɔ aɖaŋu siwo sɔ, gake ele be woado dzoxɔxɔ si mebɔ o ƒe gbagbã kple tsikpe me tsikpe ƒe gasɔdodo kpɔ |
| Dzodoƒe alo Grill | Mesɔ na PLA nuɖuɖuɖaka siwo wozãna ɖaa o |
| / Nɔnɔme Nyuitɔ | Zã | Seɖoƒe Vevitɔ |
|---|---|---|
| PLA si me kɔ nyuie | Salad, atikutsetse, abolomeƒe, deli nuɖuɖu fafɛ kple asitsaƒe ƒe ɖeɖefia si me kɔ | Dzoxɔxɔ ƒe seselelãme kple microwave ƒe nyonyome si seɖoƒe li na |
| CPLA ƒe dɔwɔwɔ | Wotia akpa siwo ƒe dzoxɔxɔ lolo wu kple dɔwɔwɔ siwo me mekɔ o | Zi geɖe la, womekɔna o; dzoxɔxɔ kple gbeɖuɖɔ ƒe dɔwɔwɔ pɛpɛpɛ nye grade-specific |
| Bagasse / Ka si Wotrɔ Asi Le | Nuɖuɖu dzodzoewo, aɖaka siwo wotsɔna yia teƒe bubuwo kple microwave dɔwɔnu tiatia aɖewo le kpeɖodzinana vɔ megbe | Opaque, tsidzadza/ami ƒe dɔwɔwɔ kple PFAS ƒe nudidiwo hiã be woagbugbɔ ŋku alé ɖe eŋu |
| PP | Nuɖuɖugoe siwo me wodea dzoe kple esiwo woate ŋu atsɔ ade microwave me le afisi woɖe mɔ le | Menye nusi woate ŋu atsɔ awɔ gbeɖuɖɔe o; nusiwo wogbugbɔ zãna nɔ te ɖe nutoa me nuƒoƒoƒu kple dzadzɛnyenye dzi |
| Nuɖuɖu Zazã | Toto si Wokafu |
|---|---|
| Saladwo Kple Nu Yeyewo | Yagbɔgbɔ, tsidzadza, anti-fog, yaƒoƒo, nufamɔ̃ kple nusiwo gblẽa nu le ame ŋu |
| Atikutsetsewo Kple Nuɖuɖu viviwo | Detsiƒonu ƒe sisi, acid ƒe kadodo, eme kɔ, ʋeʋẽ ƒe ʋuʋu kple nutsyɔnu ƒe dedienɔnɔ |
| Abolomenuwo | Crumb puncture, ami, tsiléle léle, crush takpɔkpɔ kple ɖeɖefia ƒe kɔkɔme |
| Deli Kple Nuɖuɖu Fafɛ Siwo Woɖa | Ami, acidity, sauce leakage, fill dzoxɔxɔ, tsɔtsɔ yi teƒe bubu kple edzadzraɖo ɣeyiɣi didi |
| Notsi Kple Yogurt | Cold-chain control, ʋeʋẽ, ʋuʋu, nutsyɔnu nutrenu kple gaku zazã |
PLA-gowo menaa oxygen alo tsi ƒe mɔxenu didi aɖeke nuɖuɖu ɖesiaɖe le wo ɖokui si o. Ele be woado agbalẽvi bliboa kpɔ to agbenɔƒe si woɖo be woatsɔ adzrae ɖo me, vevietɔ le nusiwo sea ʋeʋẽ lilili, siwo me tsi sɔ gbɔ ɖo, ami alo aɖi le wo ŋu gome.
Nyagbɔgblɔ be PLA nye 'aɖi mele eme o' menye nuɖuɖu ƒe kadodo ŋuti numekuku blibo o. Ele be nugoe si wowɔ vɔ—si me aŋɔ, amadede, nusiwo wotsɔ kpe ɖe eŋu, atike si tsia afu nu, nuŋlɔtsi, dzesideŋkɔ kple nusi wotsɔna léa nu ɖe nu ŋu—nasɔ na nuɖuɖu ƒomevi si woɖo, dzoxɔxɔ, ɣeyiɣi si woatsɔ aƒoe kple asi si me woayi.
De dzesi dukɔ si me woayi kple nuɖuɖu ƒe kadodo ƒe ɖoɖo si sɔ.
Ðe tsi, acid, aha sesẽ, nyinotsi, ƒuƒu, ami alo ami ƒe nuɖuɖu ƒe kadodo gɔme.
Tsɔ dzoxɔxɔ si sɔ gbɔ wu si woatsɔ ayɔe, dzoxɔxɔ si woatsɔ adzrae ɖo kple ɣeyiɣi didi si woatsɔ aƒo ka na ame.
De amadedewo, kpekpeɖeŋunu siwo wotsɔ wɔa dɔe, atike siwo tsia afu nu, agbalẽtata kple ŋkɔwo numetotoa me.
Bia ʋuʋu ŋuti nuŋlɔɖi bliboa kple esiwo le tẽ le afisi wòhiã le.
Zã asisi la ƒe nuɖuɖu ŋutɔŋutɔ tsɔ ɖo kpe ʋeʋẽ kple vivi ƒe akpaɖekedzimademade dzi le afisi wòhiã le.
| Gbɔgblɔ | B2B Gɔmeɖeɖe Nyuitɔ |
|---|---|
| Dɔwɔƒewo ƒe Compostable | Wotrɔ asi le eŋu na dudzikpɔƒe alo asitsatsa ƒe aerobic composting si dzi wokpɔna le dzidzenu si sɔ abe ASTM D6400 alo EN 13432 ene te |
| Aƒeme Compostable | Ebia ɖaseɖigbalẽ vovovowo na aƒeme-gbeɖuɖɔ ƒe nɔnɔme siwo me dzoxɔxɔ le bɔbɔe wu |
| Nusiwo gblẽna le nugbagbewo ŋu | Mede blibo o negbe ɖe wogblɔ nuto, dodokpɔmɔnu kple ɣeyiɣi hafi |
| Woate ŋu azãe ake | PLA nye polymer si woɖe ɖe vovo eye ɖewohĩ womaxɔe le PET alo mixed-plastics recycling streams me o |
| Tomenuwo tsɔtsɔ ƒu gbe alo Dzɔdzɔmenuwo ƒe Nɔnɔme | Menye esi wotsɔa gbeɖuɖɔ ƒe ɖaseɖigbalẽ xea fe ɖe eta le eɖokui si o; mègagblɔ be egbãna kabakaba ne womewɔ dodokpɔ aɖeke koŋ o |
PLA ƒe aŋɔ ƒuƒu ƒe ɖaseɖigbalẽ meɖoa kpe nuɖuɖuɖaka ɖesiaɖe si wowɔ vɔ dzi le eɖokui si o. Titrime, amadedewo, nusiwo wotsɔ kpe ɖe afu ŋu, ŋkɔwo, nutsyɔnu kple teƒe si wowɔa wo le ate ŋu akpɔ ŋusẽ ɖe ɖaseɖigbalẽa ƒe lolome dzi. Nutoa me gbeɖuɖɔdɔwɔƒewo hã ate ŋu agbe PLA ƒe nubablɛ sesẽwo ne woɖo kpe edzi gɔ̃ hã.
| Inspection Area | Wokafui be Woakpɔ edzi |
|---|---|
| Dzidzemewo Kple Ŋutetewo | Didime, kekeme, kɔkɔme, rim geometry, compartment volume kple ŋutete si woate ŋu azã |
| Unit Weight kple Gli ƒe Nɔnɔme | Kpekpeme le mama dedie nu, flange ƒe titrime, dzogoewo, gɔmeɖoanyi kple draw-goglome mama |
| Dzedzeme | Haze, gloss, black spots, gels, scratches, ɖiƒoƒo, warpage kple wɔwɔme si mede blibo o |
| Nutsyɔnu kple Nuwuwu | Fit, snap engagement, hinge cycles, tab nutsotso, leak nuwɔna kple pop-off tsitretsitsi |
| Agbatsɔtsɔ Kple Nuwo Ðeɖe Ðe Wo Nɔewo Dzi | Kpekpeme si yɔ fũ, agba si le etame, atɔ ƒe mama, ʋuɖoɖo si woƒo ƒu kple fridzi me nudzraɖoƒe |
| Dzoxɔxɔ ƒe Dɔwɔwɔ | Fridge, freezer le afisi wòsɔ le, dzoxɔxɔ yɔyɔ, condensation kple dzoxɔxɔ ƒe tsatsam |
| Nuɖuɖu Zazã | Acid, ami, mɔli, ʋeʋẽ, vivi, ʋuʋu kple eƒe agbenɔƒe dodokpɔ abe alesi wogblɔe ene |
| Nubablɛwo Kple Wo Didi | Akpa xexlẽme, abɔta nutrenu, kakɛ ƒe ŋusẽ, SKU, batch code kple pallet liƒo |
Factory-Direct Nuɖuɖu Fafɛwo ƒe Nubablɛwo ƒe Dɔwɔƒe
| Logo si Woŋlɔ Ðe Nu Ŋu | Adzɔnu ƒe dzesi, nusiwo wotsɔ wɔe ƒe dzesi, do ƒe xexlẽdzesi alo alesi woatsɔe aƒu gbe ƒe mɔfiame si le dɔwɔnuwo te |
| Amadede kple Tint | Tint si me kɔ, ɣi alo amadede si wowɔ ɖe ɖoɖo nu le nuɖuɖu-kadodo kple ɖaseɖigbalẽ me toto nu |
| Pepa ƒe Dzeside alo Abɔta | Adzɔnu ƒe dzeside, nusiwo wotsɔ wɔe ŋuti nyatakakawo, barcode kple alesi woatsɔe aƒu gbe ŋuti mɔfiamewo |
| Ememe Nubabla | Abɔta siwo me nuɖuɖu mele o, xexlẽme si dzi wokpɔna, atɔ takpɔkpɔ kple ke dzi ɖuɖu |
| Aƒetɔ Carton | Private-label artwork, SKU, lolome, ŋutete, batch, kakɛ agbɔsɔsɔme kple meliɖoɖo ƒe dzesiwo |
| Pallet ƒe Ðoɖowɔwɔ | Kakɛwo le ƒuƒoƒo ɖesiaɖe me, stack ƒe kɔkɔme si sɔ gbɔ wu, dzogoe takpɔkpɔ kple export wrapping |
Ðe nuɖuɖua zazã gɔme: Ðo kpe nuɖuɖu ƒe ƒomevi, dzoxɔxɔ si wotsɔ yɔe, nudzraɖoƒe, etsɔtsɔ yi teƒe bubu kple eƒe agbenɔƒe dzi.
Tia nugoe ƒe nɔnɔme: Na taɖodzinu ƒe ŋutete, didime, xɔwo, nutsyɔnu kple nufiame kpɔɖeŋuwo.
To nusi wotsɔ wɔe me: Ðo kpe eme kɔ, amadede, nufamɔ̃ ƒe nudidi, anti-fog kple compostability standard dzi.
Da dɔwɔnuwo kpɔ: Dzro aŋɔ siwo li fifia me alo nàdzra thermoforming-dɔwɔnu ƒe aɖaŋuɖoɖo si wowɔ ɖe ɖoɖo nu ɖo.
Dodokpɔ ƒe kpɔɖeŋuwo: Kpɔ nuɖuɖu ƒe kadodo, dzoxɔxɔ, nutsyɔnu ƒe nyonyome, tsi si le dodom, eƒe ƒuƒoƒo, ʋuɖoɖo kple dzedzeme ɖa.
Da asi ɖe adzɔnu ƒe dzeside kple nu babla dzi: Ðo kpe embossing, labels, sleeve count, carton kple pallet dzi.
Ðe asi le agbɔsɔsɔ gã wɔwɔ ŋu: De asi nɔnɔmetata, kpɔɖeŋu si dzi woda asi ɖo, QC ƒe seɖoƒewo, ɖaseɖigbalẽ ƒe lolome kple eɖoɖo ƒe ɖoɖowɔɖi te.
PLA-gowo ate ŋu atrɔ ne wodzra wo ɖo le dzoxɔxɔ gbɔ alo le ɣe ƒe keklẽ tẽ me. Ele be woaɖe nudzraɖoƒe kple ʋuɖoɖo ƒe nɔnɔmewo me na nusi tututu wowɔ, vevietɔ na nugoe siwo me kɔ siwo ƒe gli le sue kple melimɔ siwo dzi dzoxɔxɔ le ŋutɔ.
Dzra kakɛ siwo wotu nu ɖo ɖe nudzraɖoƒe si fa miamiamia, si le dzadzɛ eye ya le eme.
Te ɖa tso ɣe ƒe keklẽ tẽ, dzoxɔxɔnamɔ̃wo, xɔtaxɔ siwo me dzo le kple nugoe siwo me dzoxɔxɔ le gbɔ.
Takpɔ rims, hinges kple lid flanges tso ŋeŋe alo woƒe tɔtrɔ me.
Kpɔ stack ƒe kɔkɔme dzi be nàxe mɔ ɖe atɔ ƒe nyaƒoɖeamenu kple kakɛ ƒe mumu nu.
De dzesi nusiwo wotsɔ wɔe, ŋutete, lolome, lot, ŋkeke si dzi wowɔe kple agbenɔƒe si dzi woda asi ɖo.
Zã nudzraɖoƒe gbãtɔ, gbãtɔ si dona eye nàgalé ŋku ɖe alesi wòsɔ kple alesi wògbãe ŋu le edzadzraɖo ɣeyiɣi didi megbe.
Nuɖuɖu fafɛ nana ƒe ɖoɖo blibo ate ŋu anye kplu, nutsyɔnu, akplo, nuɖanuwo kple gbe siwo sɔ. Akpa ɖesiaɖe hiã be woawɔ eya ŋutɔ ƒe nuɖuɖu ƒe kadodo kple gbeɖuɖɔ ƒe dodokpɔ. Nuɖuɖuɖaka si ŋu woɖo kpee meɖoa kpe nusi woŋlɔ ɖe edzi, abɔta si le gota, gbe alo nu bubu si wozã kplii dzi le eɖokui si o.
Nuɖuɖudɔwɔnu Siwo Woate Ŋu Azã Kpekpe Ðe Wo Ŋu
Nuɖuɖu fafɛ zazã ƒe susu: Wotsɔa nugoe ƒe nɔnɔme sɔ kple nuɖuɖu ƒomevi, dzoxɔxɔ, nudzraɖoƒe kple ʋuɖoɖo.
Nugoe vovovowo ƒe nɔnɔme: Woate ŋu ato hinge clamshells, trays, bowls, deli nugoewo kple compartment boxes me.
Nutsyɔnu ƒe ŋgɔyiyi si sɔ: Woate ŋu ado nutsyɔnu ƒe nyonyome, nutsotso, tsi si le dodom kple eƒe ƒuƒoƒo kpɔ abe ɖoɖo ɖeka ene.
OEM ƒe tɔtrɔ: Woate ŋu adzro lolome, ŋutete, amadede, xɔwo, embossing, ŋkɔwo kple kakɛwo me.
Sedziwɔwɔ ƒe ɖoɖowɔwɔ: Woate ŋu atsɔ nuɖuɖu ƒe kadodo kple gbeɖuɖɔ ƒe nudidiwo asɔ kple asi si me woayi.
Factory-direct B2B supply: Esɔ na nuɖuɖu ƒe ŋkɔwo, nuɖuɖudzraƒewo, fiase gãwo, mamalawo kple nusiwo wotsɔ tso duta vɛ.
Nuɖuɖu ƒe ƒomevi, dzoxɔxɔ si wotsɔ yɔe, dzoxɔxɔ si wodzrana ɖo kple agbenɔƒe si hiã.
Hinged clamshell, ɖe vovo nutsyɔnu, agba, tray alo compartment-box nɔnɔme.
Ŋutete, didime, kekeme, kɔkɔme kple xɔdɔme ƒe didime siwo hiã.
Nusiwo me kɔ, ɣie, siwo ƒe amadede le vovovo alo esiwo ƒe amadede wowɔ ɖe ɖoɖo nu.
Lid profile, nutsotso, yaƒoƒo, anti-fog kple tamper-dze ƒã nudidiwo.
Fridge, freezer, dzoxɔxɔ-yɔyɔ alo ʋuɖoɖo-dzoxɔxɔ ƒe nɔnɔmewo.
Nuɖuɖu-kadodo ŋuti nuŋlɔɖiwo le teƒe si woayi-asi me kple ʋuʋu dodokpɔ ƒe nɔnɔmewo.
Dɔwɔƒewo alo aƒeme-compostability dzidzenu kple ɖaseɖigbalẽ dzesiwo.
Embossed logo, label, sleeve, ememe-pack xexlẽme, kakɛ kple pallet nudidiwo.
Nudɔdɔ ƒe agbɔsɔsɔ, ƒe sia ƒe ƒe nyagblɔɖi, melidzeƒe si woɖo tae kple ɖoɖowɔɖi si woatsɔ aɖoe ɖe amewo.
Dzro Wò PLA Nuɖuɖuɖaka Dɔwɔɖoɖoa me
Wotrɔ asi le PLA nuɖuɖuɖaka siwo me kɔ siwo wozãna ɖaa ŋu koŋ na nuɖuɖu fafɛwo. Nuɖuɖu dzodzoewo, mɔli kple nuɖuɖu siwo woɖa yeyee ate ŋu agblẽ nugoe la me. Zã bagasse si ŋu woda asi ɖo, CPLA, PP alo atike bubu si te ŋu nɔa te ɖe dzoxɔxɔ nu na dzoxɔxɔ zazã.
Seɖoƒe si tututu woaɖo la nɔ te ɖe nusiwo wotsɔ wɔe ƒe hatsotso kple nugoe ƒe nɔnɔme dzi. PLA nugoe geɖe siwo me kɔ le asitsaƒewo gblɔ be woazã wo le vuvɔ me kple dzoxɔxɔ si sɔ gbɔ wu si gogo 40°C. Ele be woado Wallis ƒe atike si wowɔ vɔ la kpɔ le dzoxɔxɔ ŋutɔŋutɔ si me wokɔe ɖo kple esi wodzrae ɖo me.
Zi geɖe la, PLA nugoe siwo me kɔ si wozãna ɖaa la menɔa dedie le microwave me o. Mègagblɔ microwave ƒe nya o negbe ɖe wodo nugoe si tututu wowɔ vɔ la kpɔ koŋ eye woŋlɔe ɖe edzi be woazãe nenema hafi.
Atsyã siwo sɔ ate ŋu asɔ kple nufamɔ̃, gake ele be woatsɔ nuɖuɖu kple nugoe ŋutɔŋutɔ ado dzoxɔxɔ si mebɔ o ƒe gbagbã, nutsyɔnu ƒe nyonyome kple tsikpe me tsi ƒe dɔwɔwɔ kpɔ.
Nusiwo wozãna zi geɖee nye salad, atikutsetse, abolomenuwo, nuɖuɖu viviwo, deli nuɖuɖu, pasta fafɛ, yogurt kple nuɖuɖu siwo woɖa si fa miamiamia. Ele be nuɖuɖu ƒe dzoxɔxɔ kple ɣeyiɣi didi si woatsɔ adzrae ɖo nanɔ agbɔsɔsɔ si dzi woda asi ɖo me.
Asi ƒe ŋutete siwo bɔ la dometɔ aɖewoe nye esiwo ade 8, 12, 16, 24, 32 kple 48oz. Woate ŋu atrɔ asi le metrik ŋutete siwo wowɔ ɖe ɖoɖo nu ŋu le mɔ̃ siwo li fifia, dɔwɔnuwo kple nudɔdɔ ƒe agbɔsɔsɔ nu.
Woate ŋu ato xɔ ɖeka, eve alo geɖe ƒe nɔnɔmewo me. Ele be woaɖo kpe mama ƒe kɔkɔme, nuɖuɖu ƒe lolome, nutsyɔnu ƒe ʋuʋu, cross-leakage kple thermoforming goglome dzi.
Woate ŋu ana hinged-lid kple separate-lid formats le alesi wowɔe nu. Ele be nuƒlelawo naɖo kpe edzi nenye be gɔmeɖoanyi, nutsyɔnu, ŋkɔwo kple nubablɛa le nyayɔyɔa me abe SKU vovovowo alo ƒuƒoƒo blibo ene.
Tsitretsitsi ƒe tsitretsitsi nɔ te ɖe nutsotso, rim, nuɖuɖu ƒe ʋeʋẽ kple ʋuɖoɖo ƒe nɔnɔmewo dzi. Mègazã nusi me tsi mate ŋu age ɖo o bliboe ne womewɔ tilt, shake kple delivery dodokpɔ to nuɖuɖu si nèdi be yeazã me o.
Woate ŋu atia atike si dzi woda asi ɖo si tsi tre ɖe afu ŋu hena nuɖuɖu siwo fa miamiamia ɖeɖefia. Ele be nusi wotsɔ kpe ɖe eŋu la naɖo nuɖuɖu ƒe kadodo kple gbeɖuɖɔ ƒe nudidiwo gbɔ eye ele be woadoe kpɔ to nufamɔ̃ ƒe tsatsam si wokpɔ mɔ na me.
Ne nugoe si wowu enu tututu la tsɔ aƒeme gbeɖuɖɔ ŋuti ɖaseɖigbalẽ si sɔ ko hafi. Dɔwɔƒewo ƒe gbeɖuɖɔ ƒe ɖaseɖigbalẽ meɖoa kpe aƒeme gbeɖuɖɔ ƒe nya aɖe dzi le eɖokui si o.
Zi geɖe la, tomenuwo menaa dzoxɔxɔ, ɔksidzin kple tsidzadza si dzi wokpɔna si wozãna le dɔwɔƒewo ƒe gbeɖuɖɔ wɔwɔ me o. Mele be woadzra PLA nuɖuɖuɖakawo be wogblẽna kabakaba le tomenuwo tsɔtsɔ ƒu gbe alo dzɔdzɔmenutowo me o.
PLA kple PET nye polymer vovovowo. Ðewohĩ womaxɔ PLA le PET gbugbɔgazã ƒe tɔsisi siwo bɔ me o, eyata ele be mɔfiame siwo ku ɖe nusiwo woatsɔ aƒu gbe ŋu nawɔ ɖe nutoa me nuƒoƒoƒu kple gbeɖuɖɔ wɔwɔ ƒe ɖoɖowo dzi.
Woate ŋu aƒo nu tso dzesidenu siwo woŋlɔ ɖe edzi, amadede siwo wowɔ ɖe ɖoɖo nu, ŋkɔ siwo woŋlɔ ɖe wo dzi, abɔta kple kakɛ siwo dzi woŋlɔ nu ɖo le ame ŋutɔ ƒe ŋkɔ me ŋu. Ele be amadedewo, nuŋlɔtsiwo kple nusiwo wotsɔna léa nu ɖe nu ŋu nanɔ ɖekawɔwɔ me kple nuɖuɖu ƒe kadodo kple gbeɖuɖɔ ƒe nudidiwo.
Dzra aɖaka siwo wotu nu ɖo ɖe teƒe si fa miamiamia si me tsi mele o, si didi tso ɣe ƒe keklẽ tẽ, dzoxɔxɔnamɔ̃wo, ʋu siwo me dzo le kple nugoe siwo me dzoxɔxɔ le ŋutɔ gbɔ. Dzoxɔxɔ si gbɔ eme ate ŋu ana be nutsyɔnu natsi alo wòagadze nyuie o.
Ɛ̃. Ele be nuƒlelawo nado kpɔɖeŋuwo kpɔ be nuɖuɖu ka ɖe wo dzi, dzoxɔxɔ si wotsɔ yɔe, nutsyɔnu ƒe nyonyome, tsi si le dodom, wo ƒoƒo ƒu, nufamɔ̃, nufamɔ̃ zazã le afisi wòsɔ le, ʋuɖoɖo kple eƒe agbenɔƒe ƒe dɔwɔwɔ.
MOQ nɔ te ɖe nugoe ƒe nɔnɔme, didime, nusi wotsɔ wɔe, amadede, nutsyɔnu ƒe nɔnɔme, dɔwɔnuwo, embossing, ɖaseɖigbalẽ kple ame ŋutɔ ƒe ŋkɔ bablawo dzi.
Na nuɖuɖu ƒomevi, dzoxɔxɔ, ŋutete, didime, nugoe ƒe nɔnɔme, nutsyɔnu, amadede, anti-fog nudidi, ɖaseɖigbalẽ, babla, nudɔdɔ ƒe agbɔsɔsɔ, yiyi kple ŋkeke si dzi woatsɔe vɛ.
Te ɖe Wallis Plastic ŋu hena PLA nuɖuɖu fafɛ aɖaka siwo woate ŋu atsɔ awɔ gbeɖuɖɔe, deli nugoewo, salad-gowo, traywo kple hinged clamshells. Míaƒe ƒuƒoƒoa doa alɔ lolome tiatia, nutsyɔnu ƒe ŋgɔyiyi, nuɖuɖu-kadodo me toto, ɖaseɖigbalẽ ƒe sɔsɔ, kpɔɖeŋu dodokpɔ, ame ŋutɔ ƒe ŋkɔ babla kple dɔwɔƒe- tẽ B2B nana.
