|
Wallis - PETG fɛ̃
| Amadede: | |
|---|---|
| Agbɔsɔsɔ: | |
| Nusi wotsɔ wɔe: | |
| Agbɔsɔsɔ: | |
Wallis linen finish PETG atsyɔ̃ɖoɖo film nye textured furniture surface material si woto vɛ na MDF panels, kabinet ʋɔtruwo, awudzraɖoƒewo, gli panels, drawer ŋgɔgbe, asitsaƒewo ƒe nuzazãwo, ɔfis xɔmenuwo kple xɔme atsyɔ̃ɖoɖo board bubuwo. Aklala ƒe nɔnɔme si wotsɔ ʋãe la naa nukpɔkpɔ ƒe goglome kple asikaka ame ŋu si le abe avɔ ene kpena ɖe eŋu esime PETG ƒe anyigba naa atsyɔ̃ɖoɖo ƒe ƒuƒoƒo si nɔa anyi didina na xɔmenuwo wɔwɔ bibiwo.
Wotrɔ asi le PETG film la ŋu na xɔmenuwo dɔwɔƒewo, MDF laminators, kabinet wɔlawo, atsyɔ̃ɖoɖo ƒe panel wɔlawo, xɔmenuwo mamalawo kple OEM ƒe ŋkɔwo, woateŋu atrɔ asi le PETG film la ŋu le amadede, didime, nɔnɔme ƒe mɔfiame, anyigba ƒe dzedzeme kple dɔwɔwɔ ƒe nudidiwo nu. Wallis ŋlɔ PETG fifia abe nu vevitɔ ene kpe ɖe PET kple PVC ƒe mɔnu bubuwo ŋu, kple amadede, yevu, ɣi kple lolome ƒe tiatia siwo wowɔ ɖe ɖoɖo nu.
Le dɔwɔƒewo ƒe xɔmenuwo wɔwɔ gome la, ele be woada sinima la kpɔ be enye laminated-panel system bliboa ƒe akpa aɖe. Dɔwɔwɔ mamlɛtɔ nɔ te ɖe PETG ƒe dzeside, panel substrate, megbe atikewɔwɔ, adhesive, lamination dzoxɔxɔ, nyaƒoɖeamenu, fli ƒe duƒuƒu, edge dɔwɔwɔ kple nuwuwu xɔmenuwo zazã.
| Adzɔnuwo ƒe Ŋkɔ | Linen Finish PETG Atsyɔ̃ɖoɖo & Ametakpɔnu Furniture Film |
| Nya Vevitɔ | PETG |
| Nusiwo Do Ƒome Kplii ƒe Tiatia | PET kple PVC tiatiaawo le xexlẽdzesiwo me fifia; ele be woaɖo kpe aŋɔ mamlɛtɔ kple xɔtutu dzi hafi abia |
| Anyigbadzi Nuwuwu | Linen / avɔ-ʋãme embossed nɔnɔme |
| Amadede | Amadede, yevu, ɣi alo amadede si wowɔ ɖe ɖoɖo nu |
| Eƒe titrime | Wotrɔ asi le eŋu le nusiwo wotia ƒe wɔwɔme kple xɔmenuwo zazã nu; ɖo kpe aklala ƒe nuwuwu ƒe dzesi dzi hafi nàbia |
| Lolome | Wowɔe ɖe ɖoɖo nu |
| Nusiwo Wotsɔ Naa Nu ƒe Nɔnɔme | Sheet alo roll configuration le titrime, kekeme kple ewɔwɔ ƒe nudidiwo nu |
| Substrates Siwo Wozãna Ðesiaɖe | MDF, particle board, plywood, PVC board kple xɔmenuwo ƒe akpa bubu siwo sɔ le lamination dodokpɔ megbe |
| Dɔwɔwɔ tso eŋu | Flat lamination, dzodzoe tete, lãɖeɖe, trimming, nugbɔ dɔwɔwɔ kple tiatia wɔwɔ ƒe ɖoɖowo le kpeɖodzinana megbe |
| Anyigba ƒe Dɔwɔnawo | Atsyɔ̃ɖoɖo aklala ƒe nɔnɔme kple ʋuʋudedi-tsitretsitsi, ɖi-tsi, tsitretsitsi ɖe asibidɛ ƒe dzesi alo bɔbɔe-kɔklɔ tiatia siwo le tiatia tiatia nutsyɔtsyɔ kple dodokpɔ kpeɖodzi |
| Dɔbiagbalẽviwo | Kabinetwo, awudzraɖoƒewo, xɔmenuwo ƒe ŋgɔgbe, gliwo, ʋɔtruwo, agbalẽdzraɖoƒewo, asitsaƒewo, ɔfis xɔmenuwo kple amedzrodzeƒewo |
| Trɔ asi le eŋu | Amadede, nɔnɔme, didime, film ƒe wɔwɔme, anyigba dzi atikewɔwɔ, megbe atikewɔwɔ, ametakpɔ film kple dɔdɔ ƒe agbawo |
De dzesii: Nusiwo wowɔ ƒe axa si li fifia metaa titrime ƒe didime si woɖo ɖi, adhesive ƒe nɔnɔme, scratch-hardness value alo UV dzidzedzekpɔkpɔ na linen-finish grade sia o. Ele be nuƒlela siwo bia nɔnɔme siawo nade dodokpɔmɔnu si sɔ kple asixɔxɔ si woɖo be woawɔ la nuƒle ƒe nɔnɔmetata me eye woada asi ɖe nuwɔwɔ ƒe kpɔɖeŋu aɖe dzi hafi awɔ nu gbogbo aɖe.
PETG nye glycol-modified copolyester si wozãna le xɔmenuwo ƒe anyigba, nusiwo woɖena fiana, nubablɛwo kple dɔwɔƒewo ƒe wɔwɔme me. Le xɔmenuwo ƒe atsyɔ̃ɖoɖo gome la, wodea asixɔxɔ PETG ŋu le eƒe sesẽ, dɔwɔwɔ ƒe asitɔtrɔ, nukpɔkpɔ ƒe dzedzeme dzadzɛ kple ŋutete si le esi be wòado alɔ amadede siwo wowɔ ɖe ɖoɖo nu kple anyigba ƒe nuwuwu ta.
Aklala ƒe nuwuwu ɖɔa anyigba si dzi woŋlɔ nu ɖo alo woŋlɔ nu ɖe edzi si wowɔ wòɖi avɔ si wolɔ̃. Fli nyui siwo wotso kple gbɔdzɔe si menya kpɔna dzea sii bɔbɔe o naa nukpɔkpɔ ƒe goglome kple asikaka nu ŋu si to vovo na xɔmenuwo ƒe anyigba siwo le gbadzaa siwo ƒe keklẽ lolo alo esiwo le gbadzaa PETG .
Le xɔmenuwo wɔwɔ gome la, woate ŋu ase PETG film sia gɔme nyuie wu be enye atsyɔ̃ɖoɖo ƒe anyigba ƒe ƒuƒoƒo si wotsɔ lãgbalẽ wɔe ɖe ʋuƒo si sɔ dzi. Ewɔa kabinet ƒe ʋɔtru si wowɔ vɔ, xɔmenuwo ƒe akpa alo ememe ʋuƒo ƒe akpa aɖe tsɔ wu be wòawɔ dɔ abe ɣeyiɣi kpui aɖe ƒe film si woɖena le etsɔtsɔ vɔ megbe ene ko.
Mo si me woŋlɔ nu ɖo la trɔa xɔmenuwo ƒe nukpɔkpɔ kple asikaka nu ŋu esime PETG ƒuƒoƒoa kpena ɖe ame ŋu wòɖea atsyɔ̃ɖoɖo ƒe akpa si le ete la ɖe vovo tso eŋudɔwɔwɔ edziedzi, kekeli ƒe anyigba ƒe kadodo kple dzadzɛnyenye gbɔ. Nu ŋutɔŋutɔ ƒe ŋeŋe, ɖiƒoƒo, atike kple vuvu ƒe tsitretsitsi nɔ te ɖe film si wotia kple eƒe anyigba ƒe nutsyɔnu dzi.
Aklala ƒe nɔnɔmetata si wotsɔ lãfu wɔe la toa nukpɔkpɔ ƒe nɔnɔme si wolɔ̃ vɛ le xɔmenuwo ƒe akpa si ne menye nenema o la, enye gbadzaa. Alesi wowɔe ate ŋu akpe ɖe xɔmenuwo ƒe aɖaŋuwɔlawo ŋu woawɔ nuƒoƒoƒu siwo me dzo le, siwo fa wu eye woate ŋu aka asi wo ŋu wu evɔ womazã avɔ ŋutɔŋutɔ ƒe xɔmenuwo ɖe xɔmenuwo ƒe anyigba sesẽwo dzi o.
Ne wotsɔe sɔ kple aklala si le keklẽm si wowɔ nyuie ŋutɔ la, aklala si ŋu woŋlɔ nu ɖo PETG ate ŋu agbã kekeli si woɖena fiana eye wòana eƒe anyigba nadze fafɛ wu. Ele be woaɖo kpe keklẽ tututu dzi le kpɔɖeŋu ŋutɔŋutɔ dzi elabena emboss ƒe goglome, amadede kple eƒe goglome ƒe nutsyɔnu kpɔa ŋusẽ ɖe emetsonu si wowu enu dzi.
PETG film si wowɔ le dɔwɔƒewo na xɔmenuwo wɔlawo te ŋu gbugbɔa nɔnɔme kple amadede ɖeka ma ke le kabinet ƒe ʋɔtruwo, agbalẽdzraɖoƒe ƒe ŋgɔgbe, awudzraɖoƒewo, agbalẽdzraɖoƒewo kple gli ƒe akpawo dzi. Ele be woakpɔ batch control kple texture direction dzi kokoko na anyigba gã siwo te ɖe wo nɔewo ŋu.
Tiatia siwo nye yevu, yevu, amadede kple esiwo wowɔ ɖe ɖoɖo nu ɖea mɔ na xɔmenuwo ƒe adzɔhawo be woatsɔ aklala ƒe nɔnɔme aƒo ƒu kple ememe amadede siwo medea akpa aɖeke dzi o, dzoxɔxɔ, dzideƒo alo esiwo wɔ ɖeka. Ele be dɔ siwo me amadedewo le vevie nazã nufiame ƒe kpɔɖeŋu ŋutɔŋutɔ tsɔ wu be woaɖo ŋu ɖe nɔnɔmetata siwo le screen dzi ɖeɖeko ŋu.
PETG ate ŋu ana atsyɔ̃ɖoɖo ƒe ƒuƒoƒo nyui aɖe na xɔmenuwo ƒe anyigba siwo ŋu wowɔa dɔ le enuenu. Woate ŋu ada anyigbadzidɔdamɔnu siwo woate ŋu awɔ le wo ɖokui si la akpɔ le afisiwo wòhiã be woagatsi tre ɖe ʋuʋudedi, asibidɛwo, ɖiƒoƒo alo dzadzɛnyenye ŋu geɖe wu.
Emboss ƒe goglome kpɔa ŋusẽ ɖe dzedzeme kple asikaka ame ŋu siaa dzi. Nuŋɔŋlɔ si menya kpɔna dzea sii bɔbɔe o nana avɔ ƒe nɔnɔme si ŋu wokɔ, evɔ xɔtuɖoɖo si goglo wu ate ŋu ana nukpɔkpɔ ƒe vovototo sesẽ wu. Ele be woada asi ɖe texture depth dzi to physical sample zazã me.
Aklala ƒe nɔnɔmewo ate ŋu akpɔ mɔ si woate ŋu akpɔ. Ele be xɔmenuwo dɔwɔƒewo naɖe mɔ̃a ƒe mɔfiame kple akpata ƒe ɖoɖo gɔme hafi atsoe ale be kabinet ƒe ʋɔtru siwo te ɖe wo nɔewo ŋu kple awudzraɖoƒe ƒe akpa siwo le wo ŋu naɖe nɔnɔme si mewɔa tɔtrɔ o afia.
Xɔmenuwo ƒe dɔ gãwo bia be woawɔ embossing ɣesiaɣi tso agbalẽ xatsaxatsa dzi yi agbalẽ xatsaxatsa dzi alo tso agbalẽ xatsaxatsa ɖeka dzi yi bubu dzi. Ele be nyonyome me dzodzro nalé ŋku ɖe tɔtrɔ siwo va le anyigba ƒe goglome, keklẽ, nɔnɔme ƒe gɔmesese kple nusiwo woate ŋu akpɔ ŋu.
Nɔnɔme ɖeka ate ŋu ato vovo le amadede yibɔ, ɣi, akpaɖekedzimademade alo esiwo me wode nu me elabena kekeli kple vɔvɔli wɔa dɔ kple anyigba si dzi woŋlɔ nu ɖo. Eyata ele be woazã amadede kple nɔnɔme si woɖo be woatsɔ awɔ xɔmenuwo ƒe mɔɖeɖe mamlɛtɔ ɖekae.
MDF nye nusi bɔ na PETG xɔmenuwo ƒe film elabena ateŋu ana anyigba si le gbadzaa eye eƒe didime nasɔ ne wodzrae ɖo nyuie. Board sanding, ke ɖeɖeɖa, tsidzadza ƒe agbɔsɔsɔ, gbadzaƒe kple adhesive coverage katã kpɔa ŋusẽ ɖe panel si wowɔ vɔ dzi.
PETG woateŋu ada atsyɔ̃ɖoɖo film hã kpɔ kple particle board, plywood kple ati bubu siwo ŋu wotrɔ asi le. Ele be woaɖo kpe anyigba ƒe dzadzraɖo kple adhesive ƒe sɔsɔ dzi elabena substrate porosity kple flatness ateŋu ato vovo.
Furniture substrate bubuwo hã ate ŋu asɔ le adhesion kple process testing megbe. Ele be woada film, adhesive kple substrate la kpɔ ɣesiaɣi abe laminated system ɖeka ene tsɔ wu be woatsɔe be xexeame katã sɔ.
Wobua PUR adhesive ɖoɖowo zi geɖe na atsyɔ̃ɖoɖo ƒe panel lamination afisi wòhiã be woawɔ kadodo sesẽ kple xɔmenuwo-panel wɔwɔ nyuie. Ele be woaɖo adhesive ƒomevi, dɔwɔwɔ ƒe kpekpeme, ʋuʋu ɣeyiɣi, roller ƒe nyaƒoɖeamenu kple dɔyɔyɔ ƒe nɔnɔmewo kple adhesive dzrala kple ewɔwɔ dodokpɔ.
Woateŋu azã dzoxɔxɔ kple nyaƒoɖeamenu ƒe lamination kple PETG xɔtuɖoɖo siwo sɔ. Dzoxɔxɔ alo nyaƒoɖeamenu si gbɔ eme ate ŋu akpɔ ŋusẽ ɖe nɔnɔme, keklẽ alo didime ƒe liƒo dzi, eyata ele be woaɖo kpe ewɔwɔ ƒe ɖoɖowo dzi na aklala-wu film si wotia.
PETG ƒe dzesi tiatia ate ŋu asɔ na xɔmenuwo ƒe akpa siwo ƒe nɔnɔme le wɔwɔm le kpeɖodzinana wɔwɔ vɔ megbe. Do goglowo, dzogoe ɖaɖɛwo kple nɔnɔmetata sesẽwo hiã film ƒe asitɔtrɔ le nɔnɔme vovovowo ŋu tso flat lamination si bɔ gbɔ, eyata ele be woaɖo kpe dzesi si tututu woatsɔ awɔ 3D ʋɔtruwo dzi hafi agblɔ nusi woatsɔ awɔ 3D ʋɔtruwo.
Film ƒe kpɔɖeŋu si me mekɔ o mate ŋu agblɔ dɔwɔwɔ le akpa si wowu enu ƒe dɔwɔwɔ ɖi bliboe o. Ele be xɔmenuwo wɔlawo nawɔ dodokpɔ ƒe akpa aɖe si me woatsɔ nusi wotsɔ wɔe ŋutɔŋutɔ, nusi wotsɔna léa nu ɖe nu ŋu kple ewɔwɔ ƒe mɔ̃a hafi ada asi ɖe PETG film gbogbotɔ dzi.
Atsyɔ̃ɖoɖo PETG xɔmenuwo ƒe film kple ametakpɔnu si woate ŋu aɖe si léna ɖe eɖokui ŋu nye adzɔnuwo ƒe xɔtutu vovovowo. Negbe ɖe wotsɔ nusi wotsɔna léa nu ɖe nu ŋu si sea nyaƒoɖeamenu gɔme koŋ de nusi dzi wolɔ̃ ɖo me ko hafi woabu film la be enye nusi wotsɔ blaa nu si hiã be woawɔ kadodomɔnu si sɔ.
Akpa si blaa nu ate ŋu abia corona dɔdamɔnu, primer alo anyigbadzinuwo dzadzraɖo bubu le adhesive chemistry kple ewɔwɔ mɔnu nu. Ele be nuƒlelawo nagblɔ dɔwɔnu siwo woɖo be woatsɔ alé nu ɖe nu ŋu kple esiwo woatsɔ alé nu ɖe nu ŋu ne wole kpɔɖeŋuwo biam.
Do adhesion kpɔ le atikewɔwɔ ƒe ɣeyiɣi bliboa megbe kple le nutome si sɔ ƒe dodo vɔ megbe. Dzodoƒe, tsileƒe kple asitsanuwo zazã ate ŋu abia be woada dzoxɔxɔ, fafa alo atike siwo wotsɔna klɔa nu ŋu bubu kpɔ.
Ðewohĩ xɔmenuwo ƒe ʋuƒo gãwo abia be woatsɔ nusi sɔ si woatsɔ ada asɔ le megbekpa dzi be woatsɔ akpɔ mɔ̃a ƒe taƒoƒo alo aʋadziɖuɖu ƒe ʋuƒo dzi. Ele be woawɔ ŋgɔgbe PETG ƒe ƒuƒoƒo, nusi léna ɖe nu ŋu, ʋuƒo kple megbe ƒe nɔnɔme ɖekae.
PETG anyigbadzidɔdamɔnu tiatia ate ŋu ana kekeli ƒe ƒoƒo ƒe tsitretsitsi nanyo ɖe edzi le panel wɔwɔ, eɖoɖo kple xɔmenuwo zazã si sɔ me. Ne ʋuʋudedi ƒe dɔwɔwɔ le vevie la, gblɔ dodokpɔmɔnu si hiã kple taɖodzinu ƒe emetsonu tsɔ wu be nàɖo ŋu ɖe nya 'anti-scratch.' ko ŋu.
Kabinet kple awudzraɖoƒe ƒe ʋɔtru siwo ŋu wowɔa dɔ le enuenu ate ŋu aɖe vi ne wotsɔ atike siwo tsia asibidɛ ƒe dzesi nu alo esiwo ŋu wokɔna bɔbɔe. Dɔwɔwɔ ŋutɔŋutɔ nɔ te ɖe nusi wotsɔ blae ƒe atike, eƒe nɔnɔme, amadede, dzadzɛnyenye mɔnu kple eƒe dodo dzi.
Woate ŋu abu tiatia siwo me ɖiƒoƒo mate ŋu age ɖo o ŋu na nuɖaƒewo, asitsaƒewo kple nuto bubu siwo me woate ŋu aka nu geɖe le. Ele be woado alesi wòsɔ kple kɔfi, ami, aƒeme dzadzɛnyenyenuwo alo nu bubuwo kpɔ le asi si woɖo taɖodzinu na nu.
Zi geɖe la, wozãa avɔ falɛfalɛ kple dzadzɛnyenye fafɛ si sɔ tsɔ léa be na xɔmenuwo ƒe anyigba siwo wowɔ vɔ PETG . Ele be woaƒo asa na abrasive pads, aggressive solvents kple atike siwo dzi womeda asi ɖo o negbe ɖe wodo woƒe gota kpɔ hafi.
Mele be woaɖɔ xɔmenuwo ƒe ɖoɖo si wozãna ɖaa PETG le wo ɖokui si be UV -siwo te ŋu nɔa te ɖe enu alo wosɔ na gota gome ɣeyiɣi didi o. Ele be dɔ siwo me ɣe ƒe keklẽ sesẽ, dzoxɔxɔ alo yame ƒe nɔnɔme le nagblɔ dɔwɔwɔ si hiã eye woazã dzeside si sɔ si wodo kpɔ.
Aklala ƒe nɔnɔme ate ŋu ana nuɖaze ƒe ŋgɔgbekpawo nadze nukpɔkpɔ ƒe nɔnɔme si fa wu esiwo wozãna ɖaa siwo le keklẽm alo esiwo le gbadzaa siwo ƒe amadede nye matte. Ele be dzodoƒedɔwo nada asɔ le ʋuʋudedi, ɖiƒoƒo, fafa, dzoxɔxɔ, nugbɔ nutrenu kple dzadzɛnyenye ƒe dɔwɔwɔ le ʋɔtru bliboa si wotsɔ laminated la ŋu.
Awudzraɖoƒe ƒe ʋɔtruwo kple agbalẽdzraɖoƒe ƒe ŋgɔgbe ate ŋu azã PETG si ƒe nɔnɔme le abe aklala ene atsɔ awɔ xɔdɔme me xɔmenuwo si wɔ ɖeka kple asikaka nu ŋu tsitotsito si menya kpɔna dzea sii bɔbɔe o kple amadede siwo wowɔ ɖe ɖoɖo nu.
Gli ƒe akpa siwo le eme, gli siwo wotsɔa nu vovovowo wɔe kple atsyɔ̃ɖonuwo ate ŋu azã aklala ƒe nɔnɔme atsɔ akpe ɖe nukpɔkpɔ ƒe goglome ŋu le anyigba gãwo dzi. Ele be woawɔ ɖoɖo ɖe texture orientation, joint position kple lighting ŋu hafi aɖoe.
Dɔwɔkplɔ̃wo, kabinetwo, nudzraɖoƒewo, amedzrodzeƒexɔwo kple kpekpewɔƒewo ƒe xɔmenuwo ate ŋu azã PETG anyigba siwo dzi woŋlɔ nu ɖo atsɔ awɔ asitsatsa ƒe xɔmenuwo si wɔ ɖeka.
Amedzrodzeƒe ƒe awudzraɖoƒewo, abadzivɔwo, gliwo, amedzrodzeƒewo kple nudzraɖoƒewo ateŋu azã aklala PETG ƒe amadede siwo wowɔ ɖe ɖoɖo nu atsɔ awɔ ɖeka kple avɔwo, anyigba kple xɔmenuwo ƒe nuwuwu.
Asitsaƒewo ƒe kabinetwo, agbalẽdzraɖoƒewo, nukpɔkpɔ ƒe kplɔ̃wo, ɖeɖefia ƒe nuzazãwo kple xɔmenuwo ƒe xɔmenuwo ate ŋu azã PETG ʋuƒo siwo ŋu woŋlɔ nu ɖo le afisi wohiã amadede si woate ŋu agbugbɔ awɔ kple asikaka anyigba ƒe nɔnɔme.
Woate ŋu ada dzidzenu siwo sɔ kple esiwo wowɔ le gbadzaa alo esiwo wowɔ la akpɔ na ʋɔtru siwo le eme, agbalẽdzraɖoƒe ƒe ŋgɔgbe, agbalẽdzraɖoƒe ƒe akpawo kple xɔmenuwo ƒe akpa bubu siwo wotsɔ ɖo atsyɔ̃e le lamination alo wɔwɔme ƒe ɖoɖoa dzi dada vɔ megbe.
| Feature | Aklala Wuwu PETG | Matte Blewu PETG |
|---|---|---|
| Anyigba ƒe Dzedzeme | Wolɔ̃ alo avɔ ƒe nɔnɔme si wokpɔna | Anyigba si le gbadzaa, si sɔ pɛpɛpɛ si ƒe keklẽ mebɔ o |
| Tactile Feel ƒe seselelãme | Textured kple asikaka ame ŋu wu | Kakaɖedzi si le gbadzaa alo fafɛ le nusi wotsɔ blae nu |
| Aɖaŋuwɔwɔ ƒe Ŋusẽkpɔɖeamedzi | Etsɔa goglome kple nɔnɔme si le abe avɔ ene kpena ɖe eŋu | Ewɔa nu suesuesuewo, dzadzɛnyenye kple esiwo womede dzesii boo o |
| Dzadzɛnyenye | Ðewohĩ abia be woalé ŋku ɖe ʋuʋudediwo kple teƒe siwo woŋlɔ nu ɖo ŋu | Ðewohĩ anyigba si le gbadzaa la tutu anɔ bɔbɔe wu |
| Tiatiamɔnu | Da asi ɖe ŋutilã me kpɔɖeŋuwo kple laminated panels siwo wowɔ vɔ dzi elabena akaɖi, amadede, nɔnɔme kple nutsyɔnu kpɔa ŋusẽ ɖe dzedzeme mamlɛtɔ dzi | |
| Nu | Gbãtɔ Furniture Bubu | Ele be Nuƒlela Naɖo kpe edzi |
|---|---|---|
| PETG | Atsyɔ̃ɖoɖo sesẽ copolyester kple asitɔtrɔ le nɔnɔmewo ŋu kple xɔmenuwo-dzime tiatia siwo wowɔ ɖe ɖoɖo nu | Grade, titrime, wɔwɔ ƒe nuwɔna, anyigba ƒe nutsyɔnu kple adhesive ƒe sɔsɔ |
| PET | Polyester atsyɔ̃ɖoɖo ƒe anyigba si ƒe sesẽme kple dɔwɔwɔ ƒe nuwɔna to vovo tso PETG | Formability, coating, megbe atikewɔwɔ kple lamination nɔnɔmewo |
| PVC | Wozãa atsyɔ̃ɖoɖo xɔmenuwo film si me woate ŋu atrɔ ɖe nɔnɔmewo ŋu le gbadzaa eye woate ŋu awɔ wo ŋudɔ | Plasticizer ƒe wɔwɔme, anyigba ƒe dɔwɔwɔ, se ƒe nudidiwo kple nusiwo wogbugbɔ zãna ŋu bubu |
Nu ɖeka aɖeke menyo wu le xexeame katã le xɔmenuwo zazã ɖesiaɖe me o. Ele be woatu nusiwo woatsɔ awɔ tiatia ɖe dzedzeme, wɔwɔme ƒe nudidi, nusi wotsɔ léa nu ɖe nu ŋu, nusi wotsɔna léa nu ɖe nu ŋu ƒe ɖoɖo, anyigba ƒe anyinɔnɔ, asi ƒe sedziwɔwɔ, gazazã kple agbenɔƒe ƒe nuwuwu ƒe aɖaŋu dzi.
Textured furniture film bia be didime kple nukpɔkpɔ siaa nawɔ ɖeka. Le nɔnɔme si dzi woda asi ɖo nu la, nyonyome me toto ate ŋu alɔ:
Nusiwo wotsɔ wɔe ƒe ɖoɖo kple PETG ƒe dzesi si dzi woda asi ɖo
Titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu
Roll alo sheet ƒe didimewo
Amadede ƒe ɖekawɔwɔ
Texture ƒe nɔnɔme kple emboss ƒe goglome
Texture ƒe mɔfiame
Anyigba ƒe keklẽ kple dzedzeme
Kpekpeɖeŋu, ʋuʋudedi, ɖiƒoƒo kple anyigba ƒe nɔnɔme madeamedziwo
Akɔtadɔdada le afisi wogblɔe le
Film ƒe nyonyome si kpɔa ame ta le afisi wotsɔe na
Scratch, stain alo asibidɛ ƒe dzesi ƒe dɔwɔwɔ le afisi wogblɔe le
Nubablɛwo kple agbalẽ xatsaxatsa ƒe dzesidede
Film ƒe kpɔɖeŋu xoxo PETG mateŋu aɖe nɔnɔme ɖesiaɖe si le kabinet ƒe ʋɔtru si wowɔ vɔ ŋu afia o. Ele be mɔɖeɖe mamlɛtɔ nada eƒe nɔnɔme, amadede, keklẽ, gbadzaƒe, adhesion, nugbɔ ƒe nyonyome kple dzadzɛnyenye ƒe dɔwɔwɔ kpɔ le laminating le ewɔwɔ ƒe board ŋutɔŋutɔ megbe.
Ele be dɔ gã siwo me kabinet ƒe ʋɔtruwo alo gli ƒe ʋuƒo siwo te ɖe wo nɔewo ŋu le nazã nuwɔwɔ ƒe hatsotso siwo dzi wokpɔna le afisi wòanya wɔ le. Ele be xɔmenuwo dɔwɔƒewo hã nalé film ƒe mɔfiame si mewɔa tɔtrɔ o me ɖe asi le lãɖeɖe kple lãɖeɖe me.
PETG nye dzoxɔxɔnu si woateŋu awɔ dɔ le mɔ̃ɖaŋununya me to nusiwo wogbugbɔ zãna ƒe ɖoɖo siwo sɔ me. Gake nutoa me nuƒoƒoƒu kple nusiwo wogbugbɔ zãna ƒe mɔnukpɔkpɔ toa vovo le asi nu.
Ne wonya tsɔ aŋetu ƒo PETG ɖe MDF ŋu tegbee ko la, alesi woate ŋu azãe ake la nɔ te ɖe nenye be woate ŋu ama anyigbadzi film, aŋenu kple ati-si wotu ɖe anyigba dzi alo atrɔ asi le eŋu le gbeɖuɖɔ ƒe tɔsisi si li me. Eyata ele be woabu xɔmenuwo ƒe akpa bliboa ŋu tsɔ wu be woagblɔ nusiwo wogbugbɔ zãna ƒe nya siwo wotu ɖe PETG ƒuƒoƒoa ɖeɖeko dzi.
Ele be woatsɔ atikeawo ƒe wɔwɔme, dodokpɔ, ɖaseɖigbalẽ kple nutoa me ƒe tsɔtsɔ ƒu gbe ƒe nɔnɔme siwo sɔ aɖo kpe nya siwo wogblɔna abe esiwo me gblẽa nu le nutome ŋu, esiwo me gblẽa nu le nutome ŋu o, esiwo me aɖi mele o alo esiwo woate ŋu azã bliboe ene dzi.
De dzesii nenye be woazã film la na kabinet ʋɔtruwo, awudzraɖoƒewo, gliwo, xɔmenuwo ƒe anyigba siwo le tsia dzi, asitsaƒewo ƒe nuzazãwo alo dɔ bubu aɖe. Nusiwo wobia tso anyigba ƒe dɔwɔwɔ nu ate ŋu ato vovo ŋutɔ.
Na MDF, particle board, plywood, PVC board alo substrate ƒe nɔnɔme bubu, si me eƒe titrime kple eƒe anyigba ƒe nɔnɔme hã le.
Gblɔ na Wallis nenye be èzãa flat lamination, PUR adhesive, hot pressing, membrane pressing alo ɖoɖo bubu ale be woate ŋu ato film ƒe wɔwɔme kple megbe ƒe atikewɔwɔ me.
Na amadede ŋutɔŋutɔ alo nɔnɔme ƒe nufiame ne anya wɔ. Ðo kpe texture ƒe goglome, mɔfiame, gloss kple tactile effect dzi to kpɔɖeŋuwo zazã me.
Tsɔe gblɔ nenye be xɔmenuwo hiã be woaɖee afia be woate ŋu anɔ te ɖe ʋuʋudedi nu, woatsi tre ɖe ɖiƒoƒo nu, woƒe dɔwɔwɔ si tsi tre ɖe asibidɛwo ŋu, atikewo ƒe tsitretsitsi alo nɔnɔme siwo ŋu wokɔ bɔbɔe eye nàna dodokpɔmɔnu si nèdi.
Na titrime, kekeme, agbalẽ xatsaxatsa ƒe didime alo agbalẽ ƒe didime, nu vevi ƒe lolome ne esɔ kple seɖoƒe siwo le ewɔwɔ ƒe mɔnu si hiã.
Laminate nusi wotsɔ wɔe ɖe xɔmenuwo ƒe ʋuƒo ŋutɔŋutɔ dzi eye nàda eƒe dzedzeme, alesi wòlé ɖe eŋu, eƒe lãɖeɖe, eƒe nugbɔ ƒe dɔwɔwɔ, eŋu kɔklɔ kple eƒe anyigba ƒe anyinɔnɔ kpɔ.
Lé film si dzi woda asi ɖo kple esi wowɔ vɔ ƒe kpɔɖeŋu ɖe asi be wòanye nukpɔkpɔ kple mɔ̃ɖaŋununya ƒe nufiame si woatsɔ awɔe ake.
Wallis naa PETG , PET , GAG kple atsyɔ̃ɖonu siwo do ƒome kplii na xɔmenuwo dɔwɔƒewo, kabinet wɔlawo, panel laminators, mamalawo kple OEM xɔmenuwo ƒe ɖoɖowo.
Woate ŋu atsɔ aklala ƒe nɔnɔmewo aƒo ƒu kple amadede vovovowo ƒe mɔfiamewo kple xɔmenuwo ƒe atsyãwo be woado alɔ kabinet, awudzraɖoƒe kple gli-panel nuƒoƒoƒu siwo wɔ ɖeka.
Woate ŋu adzro film ƒe didime, nuzazã ƒe nɔnɔme, megbedede, film si kpɔa ame ta kple eƒe bablawo me le nuƒlela ƒe wɔwɔme dɔwɔnuwo kple dɔa ƒe nudidiwo nu.
Kpɔɖeŋuwo me dzodzro ɖea mɔ na xɔmenuwo wɔlawo be woaɖo kpe woƒe nɔnɔme, amadede, woƒe adhesion kple dɔwɔwɔ ƒe nuwɔna dzi hafi atsɔ wo ɖokui ana be yewoawɔ nu gbogbo aɖewo.
Wallis doa alɔ ɖoɖo siwo wowɔna le agbɔsɔsɔ gã kple nudɔdɔ enuenu me na kabinet dɔwɔƒewo, xɔmenuwo wɔlawo, atsyɔ̃ɖonuwo wɔlawo, xɔmenuwo ƒe kontraktɔ, nusiwo wotsɔ tso duta vɛ kple mamalawo.
Wozãnɛ abe atsyɔ̃ɖoɖo ƒe anyigba ƒe ƒuƒoƒo ene na xɔmenuwo ƒe akpawo, kabinet ʋɔtruwo, awudzraɖoƒewo, gli ƒe akpawo, agbalẽdzraɖoƒe ƒe ŋgɔgbe, asitsaƒewo ƒe nuzazãwo, ɔfis xɔmenuwo kple xɔmenuwo ƒe ʋuƒo bubu siwo sɔ.
Aklala ƒe nuwuwu zãa nɔnɔmetata si woŋlɔ ɖe edzi si ɖi avɔ si wolɔ̃. Enaa nukpɔkpɔ ƒe fli nyuiwo kple asikaka nu ŋu ƒe goglome tsɔ wu be wòawɔ anyigba si le gbadzaa keŋkeŋ.
Ẽ, PETG atsyɔ̃ɖoɖo film ate ŋu ada asɔ na MDF xɔmenuwo-panel lamination. Dɔwɔwɔ mamlɛtɔ nɔ te ɖe ʋuƒoa, adhesive, film megbe atikewɔwɔ kple laminating nɔnɔmewo dzi.
Adzɔnuwo ŋuti nyatakaka siwo li fifia megblɔ megbenya si woate ŋu atsɔ alé eɖokui ɖe te si te ŋu sea nyaƒoɖeamenu o. Le xɔmenuwo wɔwɔ gome la, zi geɖe la, ele be woawɔ nu ɖe nusi wotsɔ wɔe ŋu abe lamination film ene negbe ɖe woɖo kpe xɔtuɖoɖo si léna ɖe eɖokui ŋu dzi koŋ le ɖoɖoa me hafi.
Woate ŋu ada PUR ɖoɖowo kpɔ hena atsyɔ̃ɖoɖo xɔmenuwo-panel lamination. Ele be woatsɔ PETG ƒe dzesi si wotia ado atike si wotsɔna léa nu ɖe nu ŋu, agbɔsɔsɔme si woatsɔ awɔe, megbedede, nyaƒoɖeamenu kple dɔyɔyɔ ƒe nɔnɔmewo kpɔ.
PETG ƒe dzesi tiatia ateŋu ado alɔ wɔwɔ ƒe ɖoɖowo, gake aklala ƒe nɔnɔme ateŋu atrɔ ne wokekee ɖe profile goglowo dzi. Ele be woado film la tututu kpɔ le ʋɔtrua ƒe nɔnɔme si woɖo be woawɔ la dzi hafi woawɔe le agbɔsɔsɔ gã me.
Ɛ̃. Nusiwo wowɔ ƒe axa si li fifia yɔ amadede, yevu kple ɣi ƒe tiatia, eye woate ŋu adzro amadede siwo wowɔ ɖe ɖoɖo nu me le nuƒlela ƒe kpɔɖeŋu alo dɔa ƒe nɔnɔme nu.
Woate ŋu aƒo nu tso texture customization ŋu le embossing feasibility, order agbɔsɔsɔme kple tooling ƒe nudidiwo nu. Ele be nuƒlelawo natsɔ nyatakaka ŋutɔŋutɔ ana le afisi wòanya wɔ le.
Aklala-wu-nu ƒe axa si li fifia metaa eƒe titrime si woɖo ɖi o. Na wò titrime si nèdi kple alesi nàzãe ale be Wallis nate ŋu aɖo kpe edzi be eli na dzeside si sɔ.
PETG woateŋu atsɔ xɔmenuwo ƒe anyigbawo ana kple ʋuʋudedi-tsitretsitsi ƒe sesẽme vovovowo le alesi wofae kple xɔtutu nu. Ne ʋuʋudedi ƒe tsitretsitsi le vevie ŋutɔ la, bia dodokpɔmɔnu si woɖe fia kple taɖodzinu ƒe asixɔxɔ tsɔ wu be nàtsɔe be xexeame katã ƒe dɔwɔwɔ ƒe seƒe.
Woateŋu aƒo nu tso asibidɛ ƒe dzesi ƒe dɔwɔwɔ ŋu abe anyigba ƒe tiatia ene, gake enɔ te ɖe nusi wotsɔ blae, eƒe nɔnɔme kple amadede dzi. Tsɔ kpɔɖeŋu si dzi woda asi ɖo ɖo kpe dɔwɔwɔ si wobia dzi.
Woate ŋu azãe na xɔme nuɖaƒe kabinet ŋgɔgbewo le kpeɖodzi na panel bliboa hena adhesion, dzadzɛnyenye, dzoxɔxɔ, fafa, ɖiƒoƒo, ʋuʋudedi kple nugbɔ takpɔkpɔ vɔ megbe.
Dɔwɔƒe siwo le tsia dzi la xɔa ʋuʋudedi, dzoxɔxɔ kple atike geɖe wu kabinet ʋɔtru siwo le tsitrenu. Ele be countertop dɔwo nazã dzeside si wodo kpɔ koŋ na subɔsubɔ ƒe nɔnɔme siwo hiã tsɔ wu be woatsɔe be xɔmenuwo PETG film ɖesiaɖe sɔ.
Woɖoa adzɔnu sia koŋ na xɔmenuwo ƒe atsyɔ̃ɖoɖo. Ele be woabu gota gome zazã ŋu kple dzeside si wodo kpɔ koŋ na UV ƒe nukpɔkpɔ, dzoxɔxɔ, tsidzadza kple yame ƒe nɔnɔme.
Zã avɔ falɛfalɛ kple dzadzɛnyenyenu fafɛ si sɔ. Ƒo asa na aŋenu siwo wotsɔna ƒoa aŋɔe kple atike siwo me wodea amii negbe ɖe wodo anyigba si nètia la kpɔ be atike mawo le eme hã.
PETG nye dzoxɔxɔnu si woateŋu agbugbɔ awɔ le mɔ̃ɖaŋununya nu le ɖoɖo siwo sɔ me, gake nusiwo wogbugbɔ zãna ŋutɔŋutɔ ƒe anyinɔnɔ to vovo. Ne wonya ƒoe ɖe MDF alo ʋuƒo bubuwo ŋu tegbee ko la, agbe ƒe nuwuwu ƒe atikewɔwɔ nɔ te ɖe nu geɖe ƒe ʋuƒo ƒe xɔtutu bliboa dzi.
Adzɔnu ƒe axa si li fifia yɔ PETG , PET kple PVC nusiwo ƒe tiatia. Ele be woaɖo kpe nɔnɔme si tututu wowɔ, dɔwɔwɔ ƒe nuwɔna kple nɔnɔme si li dzi ɖe vovo na nu ɖesiaɖe.
Ɛ̃. Ele be woatsɔ board ŋutɔŋutɔ, adhesive kple ewɔwɔ dɔwɔnuwo awɔ laminated kpɔɖeŋu aɖe. Da eƒe nɔnɔme, amadede, alesi wòléna ɖe nu ŋu, lãɖeɖe, nugbɔ ƒe dɔwɔwɔ, dzadzɛnyenye kple anyigba ƒe dɔwɔwɔ kpɔ hafi nàda asi ɖe edzi le agbɔsɔsɔ gã me.
Na nusiwo hiã, titrime, kekeme, agbalẽ xatsaxatsa ƒe didime alo agbalẽ ƒe didime, amadede ƒe nufiame, aklala ƒe nɔnɔme ƒe nudidi, substrate, adhesive, lamination ƒe ɖoɖo, anyigba-dɔwɔwɔ ƒe nudidiwo, agbɔsɔsɔ kple dukɔ si me woayi.
Èle aklala ƒe nuwuwu PETG xɔmenuwo film wɔla si ŋu kakaɖedzi le dim na MDF panels, cabinets, awudzraɖoƒewo alo atsyɔ̃ɖoɖo xɔmenuwo wɔwɔ? Ðo Wallis wò nudidi, titrime, dzidzeme, amadede, texture nufiame, panel substrate, lamination ɖoɖo, anyigba dzi nudidiwo kple nudɔdɔ agbɔsɔsɔme na mɔ̃ɖaŋununya me toto kple dɔwɔƒe ƒe asixɔxɔ.
