|
Wallis -PET ƒe agbalẽ
Wallis ye nye esia
| Nusi wotsɔ wɔe: | |
|---|---|
| Amadede: | |
| viɖe: | |
| Dɔwɔwɔ: | |
| Agbɔsɔsɔ: | |
Wallis naa RPET agbalẽvi sesẽ si wowɔ na dzoxɔxɔ ƒe bablawo abe nuɖuɖugowo, clamshells, blister packs, nusiwo wotsɔ dea adzɔnuwo me kple asitsaƒewo ɖeɖefia packs. Wowɔe kple PET nusiwo wogbugbɔ zã, agbalẽa ƒo sesẽnuwɔwɔ ŋutɔŋutɔ, adzɔnuwo ƒe ɖeɖefia si me kɔ kple wɔwɔme ƒe dɔwɔwɔ nyuie na nubablɛ trɔlawo kple adzɔnu ƒe ŋkɔ tɔ nu ƒu.
Woate ŋu atrɔ asi le eƒe titrime, kekeme, nusiwo wogbugbɔ zã ƒe xexlẽme ƒe sɔsɔme, anyigba ƒe dɔwɔwɔ, amadede kple agbalẽ xatsaxatsa ƒe nɔnɔme ŋu le ewɔwɔ ƒe ŋutete me. Gblɔ wò xɔtutu ƒe ɖoɖo, akpa si wowu enu ƒe didime kple sedziwɔwɔ ƒe nudidiwo ale be míaƒe ƒuƒoƒoa nate ŋu akafu xɔtutu si sɔ ɖe xɔtuɖoɖo si ƒe lolome sɔ na amesiame teƒe.
Agbalẽvi ƒe nɔnɔme nyuitɔ nɔ te ɖe agbalẽvi ƒe nɔnɔme, dɔwɔnuwo, wɔwɔme ƒe dzoxɔxɔ, nutata ƒe goglome, nutrenu mɔnu kple nuwuwu zazã ƒe nɔnɔme dzi. Tabla si le ete la gblɔ tiatia vevi siwo dzi nàto aɖo kpe edzi le nyayɔyɔɣi; wolɔ̃ ɖe edzi le nudɔdɔ ɖesiaɖe ƒe anyinɔnɔ mamlɛtɔ kple mɔɖeɖe ɖe nu ŋu dzi.
| Item | Custom Tiatia | Sita Wòle Vevie |
|---|---|---|
| Nusiwo wotsɔ wɔe ƒe wɔwɔme | RPET alo multilayer PET xɔtutu, le dɔwɔwɔ me | Da sɔ le nusiwo wogbugbɔ zã, anyigba ƒe nyonyome kple sedziwɔwɔ ƒe hiahiãwo me |
| Titrime kple mɔɖeɖe ɖe nu ŋu | Wotrɔ asi le eŋu le nuwɔwɔ ƒe ŋutete me | Ekpɔa ŋusẽ ɖe sesẽme, dzoxɔxɔ ƒe nuwɔna kple gli ƒe mama dzi |
| Kekeme kple agbalẽ xatsaxatsa ƒe nɔnɔme | Trɔ asi le kekeme, agbalẽ xatsaxatsa ƒe didime, nu vevi kple winding mɔfiame | Doa alɔ mɔ̃wo ƒe sɔsɔ kple nuzazãwo zazã |
| Dzedzeme | Amadede si me kɔ alo si trɔ asi le eŋu, ne woɖo kpe edzi | Ewɔ ɖeka kple adzɔnuwo ƒe dzedzeme kple adzɔnu ƒe dzeside ƒe ɖeɖefia |
| Anyigbadzidɔwɔwɔwo | Anti-fog, antistatic, anti-block alo agbalẽtata ƒe atikewɔwɔ ne ele | Kpena ɖe ame ŋu be woakpɔ pack zazã, tɔtrɔ kple wo gbɔ kpɔkpɔ ƒe nudidiwo gbɔ |
| Nuŋlɔɖiwo wɔwɔ | Wogblɔe le asi kple nuwuwu zazã nu | Doa alɔ nusiwo dzi woda asi ɖo kple nuƒlela ƒe dzedze |
RPET zãa PET si wogbugbɔ xɔ abe nu xoxowo ƒe dzɔtsoƒe ene, si kpena ɖe nubablɛwo ƒe ƒuƒoƒowo ŋu be woatsɔ nusiwo wogbugbɔ zã ade nubablɛ sesẽ ƒe nɔnɔme tiatia aɖewo me. Ele be woagblɔ nusiwo wogbugbɔ zã ƒe alafa memamã kple nusiwo woate ŋu akpɔ eye woaɖo kpe edzi na dɔ ɖesiaɖe.
Gauge si wotia nyuie naa sesẽ si hiã be woatsɔ akpɔ nusiwo wowɔ ta le wo yɔyɔ, wo tsɔtsɔ yi teƒe bubuwo, wo ɖeɖefia kple wo zazã me. Woate ŋu atsɔ agbalẽ ƒe wɔwɔme asɔ kple tray ƒe goglome, flange ƒe nɔnɔme, agba kple stacking ƒe nudidiwo.
Dzeside siwo me kɔ ateŋu ana adzɔnuwo nadze nyuie na nuɖuɖu yeyewo, nuzazãwo kple asitsanuwo ƒe agbawo. Eme kɔ ŋutɔŋutɔ ate ŋu ato vovo le nusiwo wogbugbɔ zã ƒe agbɔsɔsɔme, agbalẽa ƒe wɔwɔme, amadede, anyigba ƒe nɔnɔme kple dɔwɔwɔ ƒe ɖoɖowo nu.
PET ate ŋu ana tsitretsitsi ɖe tsi kple ya ŋu wòaɖe vi na nu geɖe siwo wotsɔ blaa nu sesẽwoe. Ele be woatsɔ agbalẽvi mamlɛtɔ ƒe wɔwɔme, agbalẽgo ƒe nɔnɔme, nutsyɔnu ƒe ɖoɖo kple nusiwo wowɔ ŋutɔŋutɔ dodokpɔwo aɖo kpe agbenɔƒe si wobia dzi ɣesiaɣi.
Titrime si nɔa anyi ɖaa kple winding si dzi wokpɔna kpena ɖe agbalẽa ƒe nuɖuɖu, dzoxɔxɔ kple wɔwɔme ŋu wògblɔa nya ɖi wu. Le deep-draw trays alo complex cavities gome la, ele be forming window la nadze le nuƒlela ƒe dɔwɔnuwo dzi elabena dzoxɔxɔnamɔ̃ ƒe ɖoɖo, cycle time, mold temperature kple plug ƒe kpekpeɖeŋu katã kpɔa ŋusẽ ɖe emetsonua dzi.
Ele be taɖodzinu ƒe nɔnɔmetata nabu draw ratio, dzogoe ƒe gɔmesese, gli-titrime mama kple flange gbadzaa ŋu. Wokafu dodokpɔ ƒe agbalẽ xatsaxatsawo ne wole nuwo ƒe wɔwɔme, nusiwo wogbugbɔ zã ƒe agbɔsɔsɔme, dzidzenu alo dɔwɔnuwo trɔm.
Woate ŋu atrɔ RPET agbalẽvi sesẽ la wòazu akpa siwo wowɔ, nusiwo wotsɔ de eme kple aɖaka si woate ŋu abla ƒe nɔnɔme tiatia aɖewo. Ele be woatrɔ asi le lãɖeɖe ƒe ʋuʋu, crease ƒe nɔnɔme kple mɔ̃ ƒe ɖoɖowo ŋu ɖe agbalẽdzidzenu kple nuwuwu-nuwɔna ƒe geometry nu.
Ne ehiã be nàta agbalẽ, abla nu, atsyɔ nu nu alo atsyɔ nu nu dzi la, de dzesi nuŋlɔtsi, nusi léna ɖe nu ŋu, nutrenu ƒe ƒuƒoƒo kple dɔwɔwɔ ƒe nɔnɔmewo hafi nàwɔe. Woɖo kpe anyigbadzi-dɔdamɔnu ƒe tiatia dzi ɖe tɔtrɔmɔnu si woɖo be woatrɔ la nu.
Woateŋu awɔ hatsotso siwo sɔ ɖe nusiwo wowɔ ƒe agbawo, abolomeƒe ƒe agbawo, deli nugoewo kple clamshells siwo me kɔ me. Ne woɖo kpe hatsotso si wotia, ƒuƒoƒo ƒe ɖoɖo kple kpeɖodzigbalẽwo dzi na asi si woɖo taɖodzinu na ko hafi woate ŋu azã nuɖuɖu ƒe kadodo.
Clear rigid sheet kpena ɖe ame ŋu woɖea xɔtunuwo, agbalẽŋlɔnuwo, atsyɔ̃ɖonuwo, fefenuwo kple asitsanuwo bubuwo fiana hekpɔa wo ta. Woate ŋu atrɔ asi le gauge kple wɔwɔme ƒe nuwɔna ŋu wòasɔ ɖe doa ƒe goglome kple nusi wowɔ ƒe kpekpeme nu.
Woate ŋu ata RPET agbalẽvi tiatia, atso ku eye woaƒoe na kakɛ siwo me kɔ alo fesre siwo me adzɔnuwo ƒe dzedzeme le vevie le. Ele be woado agbalẽ xatsaxatsa ƒe dɔwɔwɔ kpɔ le agbalẽa ƒe titrime kple crease geometry nu.
Tray siwo wowɔ ɖe ɖoɖo nu ate ŋu ama akpawo dome ahakpɔ wo ta le wo ƒoƒo ƒu, wo dzadzraɖo kple wo tsɔtsɔ yi teƒe bubuwo me. Woate ŋu agblɔ antistatic dɔwɔwɔ ne ele eye ele be woaɖo kpe edzi le tsitretsitsi ƒe didime si hiã kple subɔsubɔ ƒe nɔnɔmewo nu.
Dzro Wò Nubablɛwo Ŋuti Dɔdamɔnua Me
Ele be woatu nusiwo woatsɔ awɔ tiatia ɖe nusiwo wotsɔ blae bliboa, tɔtrɔ ƒe ɖoɖo, adzɔnuwo takpɔkpɔ, ɖoɖowo kple nutoa me ƒe nuwo gbugbɔgaxɔ ƒe ɖoɖo dzi. Nusiwo gbɔna tsɔtsɔ sɔ kple wo nɔewo nye gɔmedzedze nyui aɖe, ke menye nusi woatsɔ aɖo dɔbiagbalẽvi dodokpɔ teƒe o.
| Factor | Sesẽ RPET Agbalẽvi | Ðetugbi Nɔaƒe APET Agbalẽvi | PVC Sesẽ Agbalẽvi |
|---|---|---|---|
| Nusiwo wogbugbɔ zã | PET si wogbugbɔ zã ƒe akpa aɖe si woɖo ɖi la le eme | Zi geɖe la, wotua ɖetugbui leaƒe PET resin dzi | Eto vovo le nudzrala kple dzeside nu |
| Eme kɔ nyuie | Nu me kɔ nyuie ate ŋu adzɔ; dzedzeme nɔ te ɖe eƒe wɔwɔme kple nusi wotsɔ ɖua nuɖuɖu dzi | Zi geɖe la, eme kɔ nyuie si mewɔa tɔtrɔ o | Nu me kɔ nyuie le dzesi siwo sɔ me |
| Dzoxɔxɔ ƒe nɔnɔmewɔwɔ | Esɔ ne wotsɔ dzeside kple alesi wowɔa dɔe sɔ kple wo nɔewo | Woɖo tiatia na thermoformed packs siwo me kɔ | Ewɔa nu nyuie gake ebia be woawɔ PVC-koŋ le eŋudɔwɔwɔ kple egbugbɔgaxɔ ŋuti nyametsotsowo |
| Nusi sɔ nyuie wu | Dɔ siwo le PET ƒe dɔwɔwɔ dim kple nusiwo wogbugbɔ zã si ŋu woɖo kpee | Dɔ siwo tsɔ ɖetugbui leaƒe-resin ƒe ɖekawɔwɔ ɖo nɔƒe gbãtɔ | Dɔdamɔnu siwo ŋu wotrɔ asi le koŋ eye woda asi ɖe edzi na PVC |
Gbugbɔgazã nɔ te ɖe pack ƒe nɔnɔme bliboa, ŋkɔwo, nusiwo wotsɔna léa nu ɖe wo ŋu, amadedewo, ɖiƒoƒo, nuƒoƒoƒu ƒe mɔnukpɔkpɔ kple nutoa me gbugbɔgazã ƒe xɔtuɖoɖowo dzi. Ðo kpe nutoa me ƒe mɔfiamewo dzi hafi nàgblɔ nutomenyawo tso agbalẽvi si wowu enu ŋu.
Ðe nuwuwu zazã gɔme: nusi wowɔ ƒe ƒomevi, agbalẽvi ƒe nɔnɔme, agba, nudzraɖoƒe kple mama ƒe nɔnɔmewo.
Ma tɔtrɔ ƒe ɖoɖoa: thermoforming mɔ̃, dzoxɔxɔ mɔnu, aŋɔ ƒe nɔnɔme, tsatsam ƒe duƒuƒu kple trimming mɔnu.
Kpe dzidzemewo dzi: taɖodzinu ƒe titrime, mɔɖeɖe ɖe nu ŋu, agbalẽa ƒe kekeme, agbalẽ xatsaxatsa ƒe didime, nuto kple ʋuʋudedi ƒe mɔfiame.
Ðo dzedzeme kple dɔwɔwɔ: eme kɔ, amadede, anyigba ƒe dɔwɔwɔ, agbalẽtata, nutrenu alo antistatic hiahiãwo.
Ŋlɔ sedziwɔwɔ ƒe hiahiãwo ɖi: asi si me woayi, nuɖuɖu ƒe kadodo ƒe nɔnɔme le afisi wòsɔ le, kpeɖodzi siwo me wogbugbɔ zãe kple dodokpɔ ŋuti nuŋlɔɖi siwo hiã.
Nubablɛwo ƒe dɔwɔwɔ nyuie nɔ te ɖe nusi wu titrime si woyɔna be wo nɔewo dzi. Ele be woakpɔ nusiwo va, extrusion nɔnɔmewo, titrime profile, anyigba ƒe dzedzeme, roll winding kple nuwuwu didimewo dzi ɖe nɔnɔme si dzi woda asi ɖo.
Hafi woawɔe le agbɔsɔsɔ gã me la, nuƒlelawo ate ŋu ana nɔnɔmetatawo, kpɔɖeŋuwo alo nɔnɔmetatawo wɔwɔ ƒe nyatakakawo hena mɔ̃ɖaŋununya me toto. Emegbe woate ŋu azã kpɔɖeŋu alo dodokpɔ ƒe sedede atsɔ aɖo kpe dzoxɔxɔ ƒe ŋuɖoɖo, do ƒe gɔmesese, trimming, stacking kple finished-pack ƒe dɔwɔwɔ dzi le dɔwɔnu ŋutɔŋutɔwo dzi.
Ne èdi be yeagawɔ nudɔdɔ ake la, zã nusiwo dzi woda asi ɖo ƒe nuŋlɔɖi kple dzidzenu siwo dzi wolɔ̃ ɖo be woaxɔe. Esia nana be nuƒle ŋuti nyatakakawo me kɔna eye wòkpena ɖe ame ŋu be woaɖe vovototo si woate ŋu aƒo asa na le nusiwo wowɔ ƒe hatsotsowo dome dzi akpɔtɔ.
Wallis wɔa dɔ kple nubablɛ ƒlelawo be woatsɔ agbalẽvi sesẽ la asɔ kple alesi woɖoe be woatrɔ asi le wo ŋu kple nudidi siwo wodi be woatsɔ abla nuawoe vɔ. Trɔ asi le ŋgɔyiyi ate ŋu axɔ gbugbɔgawɔ-emenya ƒe seƒe, didime, dzedzeme, anyigba ƒe dɔwɔwɔ kple agbalẽ xatsaxatsa ɖoɖo le kpeɖodzi wɔwɔ ƒe ŋutete me.
Ðo wò nutata alo fifi nu ƒe nɔnɔmewo ɖe mí kpe ɖe taɖodzinu dɔbiagbalẽvi, ƒe sia ƒe didi kple yiyi ƒe asi ŋu. Míaƒe ƒuƒoƒoa alé ŋku ɖe nyatakakaawo ŋu eye woaɖo eŋu kple nyatakaka siwo hiã hena kpɔɖeŋuwo xɔxɔ kple wo yɔyɔ.
Te ɖe Wallis ŋu hena Kpɔɖeŋuwo
Rigid RPET sheet nye agbalẽ si wotsɔ blaa nu si wotsɔ polyethylene terephthalate si wogbugbɔ zã wɔ. Zi geɖe la, wotsɔa agbalẽ xatsaxatsa alo agbalẽ xatsaxatsawo naae eye wotrɔnɛ to dzoxɔxɔ ƒe nɔnɔme, ku lãɖeɖe, babla alo mɔnu bubuwo dzi.
Ẽ, woate ŋu atsɔ dzoxɔxɔ awɔ RPET ƒe dzesi si sɔ wòazu tray, clamshells, blisters kple inserts. Ele be woatsɔ grade, gauge kple processing window asɔ kple aŋɔa ƒe geometry kple dɔwɔnuwo.
Woateŋu adzro nusiwo wogbugbɔ zã ƒe tiatia me le dɔwɔwɔ, dzedzeme, ɖoɖowo kple nusiwo li ƒe wɔwɔme si hiã nu. Gblɔ alafa memamã si nèdi be yeaxɔ ne èle ga home biam.
Ele be woaɖo kpe nuɖuɖu-kadodo zazã dzi na grade kple layer ƒe wɔwɔme tututu le asi si me woayi. Gblɔ nuɖuɖu ƒomevi, kadodo ƒe nɔnɔmewo kple nuŋlɔɖi siwo hiã na Wallis hafi nàbia.
Na dɔdamɔnua, agbalẽa ƒe titrime kple mɔɖeɖe ɖe nu ŋu, kekeme, agbalẽ xatsaxatsa ƒe didime, nu vevi, amadede, nusiwo wogbugbɔ zã-nyatakaka, anyigba ƒe nudidiwo, nudɔdɔ ƒe agbɔsɔsɔ kple teƒe si woatsɔe ayi. Nutatawo kple kpɔɖeŋu siwo li fifia kpena ɖe ame ŋu.
Dɔwɔwɔ ƒe anyigba ƒe tiatia ate ŋu anɔ anyi le grade kple dɔwɔwɔ nu. Gblɔ dɔwɔwɔ kple dodokpɔmɔnu si hiã ale be woate ŋu ada alesi wòate ŋu adzɔe kpɔ hafi axɔ kpɔɖeŋu.
Na nusi wotsɔ wɔe la nanɔ nutrenu me, wòanɔ dzadzɛ eye wòaƒu, wòanɔ adzɔge tso ɣe ƒe keklẽ tẽ, dzoxɔxɔ gã kple tsidzadza gbɔ. Wɔ ɖe nudzraɖoƒe ƒe ɣeyiɣi si dzi wolɔ̃ ɖo kple mɔfiame ɖesiaɖe si wona le ƒuƒu alo eƒe nɔnɔme ŋu si wona na hatsotso si nètia dzi.
Ɛ̃. Dodokpɔ kpena ɖe ame ŋu be woaɖo kpe mɔ̃ ƒe nuɖuɖu, dzoxɔxɔ, nutata ƒe goglome, gli mama, lãɖeɖe, nuƒoƒoƒu kple pack ƒe dɔwɔwɔ dzi hafi woawɔ nudɔdɔ si lolo wu.
Ðewohĩ woate ŋu agbugbɔe azã le afisi woxɔa PET-nubablɛwo le, gake emetsonua nɔ te ɖe nubablɛawo katã ƒe wɔwɔme kple nutoa me ƒe nuƒoƒoƒu kple wo ɖoɖo ɖe hatsotsowo me ƒe ɖoɖowo dzi. Ŋkɔwo, nusiwo wotsɔna léa nu ɖe nu ŋu, amadedewo, nusiwo wotsɔ blaa nu kple nusiwo susɔ ate ŋu akpɔ ŋusẽ ɖe woƒe ɖekawɔwɔ dzi.
