|
Wallis -PET ƒe agbalẽ
Wallis ye nye esia
PET ƒe Agbalẽ
| MOQ: | |
|---|---|
| Amadede: | |
| Titrime: | |
| Dɔwɔwɔ: | |
| Nu: | |
| Agbɔsɔsɔ: | |
Wallis anti-fingerprint gloss clear PET sheet film ƒoa PET substrate si me kɔ kple anyigbadzinu si ŋu kɔ bɔbɔe si kpena ɖe asibidɛwo, ŋutigbalẽmiwo kple smudges ŋu be womegadzena tututu o. Wotrɔ asi le eŋu na nukpɔkpɔ fesrewo, touch-panel overlays, control panels, appliance fascias, electronic-device surfaces kple dɔ bubu siwo woate ŋu aka ɖe wo dzi ŋutɔ siwo bia be eme nakɔ eye wòadze abe ɖe wòle keklẽm nyuie ene.
Woate ŋu atsɔ PET ƒe titrime, kekeme, agbalẽ alo agbalẽ xatsaxatsa ƒe nɔnɔme, keklẽ, nukpɔkpɔ ƒe dɔwɔwɔ kple asibidɛ ƒe dzesi si tsi tre ɖe eŋu asɔ kple tɔtrɔ ƒe ɖoɖoa kple nusi wowɔ vɔ. Ele be nuƒlelawo naɖe dzidzenu siwo woate ŋu adzidze atsɔ axɔe—abe kekeli ƒe kaka, aŋɔ, keklẽ, nusi wotsɔ blae, dzogoe si dzi woate ŋu aƒoe ɖo, alesi wòate ŋu avuvu kple alesi wòanɔ anyi eteƒe nadidi—hafi woada asi ɖe nusi wowɔ ƒe dzesi dzi.
Tabla si gbɔna la ƒo nu tso Wallis ƒe nuzazãwo ƒe tiatia kple mɔ̃ɖaŋunu siwo dzi wòle be woaɖo kpee le kpɔɖeŋuwo xɔɣi ŋu kpuie. Asixɔxɔ mamlɛawo nɔ te ɖe PET substrate si wotia, coating xɔtutu kple eŋudɔwɔwɔ dzi.
| Nu si wowɔ | Anti-asibidɛ ƒe dzesi gloss kɔ PET agbalẽ alo film |
| Nusiwo Wozãna le Gɔmeɖoanyi | Polyethylene terephthalate (PET) si me kɔ nyuie . |
| Ŋkume | Gloss kɔ anti-asibidɛ dzesi / bɔbɔe-kɔklɔ atike anyigba |
| Amadede | Nusi me kɔ abe dzidzenu ene; amadede bubu siwo ŋu woate ŋu ada dɔa kpɔ le |
| Nusiwo Wotsɔ Naa Nu ƒe Nɔnɔme | Agbalẽ xatsaxatsa alo agbalẽ siwo wotso |
| Dzidzenu ƒe Titrime | 0.15-3 mm alo wowɔe ɖe ɖoɖo nu; ɖo kpe optical-film ƒe dzesi siwo le tsɛ wu dzi ɖe vovo |
| Roll ƒe Kekeme | 50-1280 mm alo wowɔe ɖe ɖoɖo nu |
| Agbalẽvi ƒe Agbɔsɔsɔme Siwo Bɔ | 700 × 1000 mm, 1000 × 2000 mm kple 1220 × 2440 mm; lolome siwo wowɔ ɖe ɖoɖo nu li |
| Anti-Fingerprint Dɔwɔwɔ | Ðe egɔme to asibidɛ ƒe dzesi-kpɔkpɔ, dzadzɛnyenye bɔbɔe, tsi/ami ƒe kadodo-dzogoe alo asisiwo dodokpɔ mɔnu si dzi wolɔ̃ ɖo |
| Nudidi Siwo Le Nukpɔkpɔ Ŋu | Kekeli ƒe kaka, ahomya, keklẽ, eme kɔ nyuie kple dziŋgɔli ƒe ŋusẽkpɔɖeamedzi ƒe seɖoƒe siwo dzi woaɖo kpee |
| Anyigba ƒe Anyigba ƒe Agbenɔƒe | Coating adhesion, pencil hardness, abrasion cycles kple atike-kɔklɔ ƒe tsitretsitsi nye grade-koŋ |
| Dzimetɔtrɔ | Slitting, sheet cutting, die cutting, printing, laminating kple tiatiawɔblɔɖe ƒe mɔnuwo, le dzeside ƒe kpeɖodzi te |
| Dɔwɔwɔ Siwo Wozãna Zi geɖe | Fesre siwo woɖena fiana, touch-panel overlays, control panels, appliance fascias, POS terminals, kiosks kple elektrɔnik anyigba dzi takpɔkpɔ |
| MOQ | Eƒe kpekpeme wu kilogram 100; ɖo kpe edzi na custom coating, titrime kple didime |
Anti-fingerprint PET film nye anyigbadzinu si wɔa dɔ si wotsɔ PET substrate si me kɔ kple anti-smudge alo anyigbadzinu si ŋu wokɔ bɔbɔe. Dɔdamɔnua trɔa alesi ŋutigbalẽmi kple tsi wɔa dɔ kple eƒe gowoe, si kpena ɖe ame ŋu be asibidɛwo ƒe vovototo dzi ɖena kpɔtɔna eye wònana wònɔa bɔbɔe be woatutu nusiwo susɔ la ɖa esime wòléa woƒe dzedzeme si le keklẽm ta.
PET naa nuwɔwɔ le gaglãgbe, didime ƒe liƒo kple tɔtrɔ ƒe dɔwɔwɔ. Nusi wotsɔ blaa nu si wɔa dɔ la naa nuwɔna si tsi tre ɖe asibidɛ ƒe dzesi ŋu. Esi wònye be dɔwɔwɔ nɔ te ɖe nutsyɔnu ƒe ɖoɖo bliboa dzi ta la, PET film eve siwo me kɔ siwo ɖi wo nɔewo le nukpɔkpɔ me ate ŋu ana dzadzɛnyenye, abrasion ƒe agbenɔƒe kple nukpɔkpɔ me tsonu siwo to vovo kura.
Wotrɔ asi le anyigba si ŋu ami mele bɔbɔe o alo esi me ami mele o ŋu ale be asibidɛ ƒe amiwo nakaka alo alé ɖe wo ŋu bɔbɔe wu PET si ŋu womewɔ atike ɖo o. Le alesi wowɔ nusi wotsɔ blae nu la, nusiwo susɔ ate ŋu awɔ dzesi suewo, magadze le ŋkume o alo woaɖe wo ɖa ne wometutu wo o.
Dzogoe si wotsɔ ka ɖe eŋu le gɔmedzedzea me alo asibidɛ ƒe dzesi ƒe tsitretsitsi meɖea alesi film la awɔ dɔe le asikaka eŋu enuenu kple eŋu kɔklɔ vɔ megbe o. Le kadodo geɖe ƒe dɔwɔwɔwo gome la, da asibidɛ ƒe dzesi ƒe nuwɔna kpɔ ɖekae kple abrasion, coating adhesion, haze, gloss kple cleanability le teƒenɔla ƒe awudodo ƒe tsatsam megbe.
Asibide ƒe dzesi, awu sesẽ, tsi ƒe keklẽ, tsi ƒe keklẽ, tsi, adhesive-backed kple dɔlékuiwutike nye dɔ vovovowo. Woate ŋu aƒo wo nu ƒu ɖe atike ɖeka me, gake mele be woabu wo dometɔ aɖeke o negbe ɖe wogblɔe hedoe kpɔ be woakpɔ dzesi si tututu wobia.
Klẽƒe si ŋu wowɔ atike ɖo kpena ɖe asibidɛ ƒe dzesi ƒe vovototo si wokpɔna kple ami ƒe sisi dzi kpɔtɔna, si wɔnɛ be nukpɔkpɔwo, xɔtunuwo kple atsyɔ̃ɖonuwo ƒe dzedzeme nɔa dzadzɛ wu le tututu ƒe tsatsamwo dome.
Xɔtutu si me kɔ si klẽna doa alɔ adzɔnuwo ƒe dzedzeme, nɔnɔmetata siwo wota kple nukpɔkpɔ ƒe keklẽ. Ele be woagblɔ nukpɔkpɔ ƒe dɔwɔwɔ to ʋuʋu, ahomya kple keklẽ ƒe taɖodzinu siwo woate ŋu adzidze me tsɔ wu be woagblɔ nukpɔkpɔ ɖeɖeko.
Nusi wotsɔ blaa nu si ŋu kɔ bɔbɔe ate ŋu aɖe agbagbadzedze si hiã be woaɖe asibidɛwo kple nusiwo bɔ ɖe anyigba dzi la dzi akpɔtɔ. Ele be woatsɔ atike ŋutɔŋutɔ, avɔwo kple tututu zi gbɔ zi geɖe siwo wozãna le subɔsubɔdɔa me ado dzadzɛnyenye-nuwɔnu ƒe sɔsɔ kple nusi wotsɔ blaa nu ƒe anyinɔnɔ kpɔ.
PET naa ŋusẽ si ŋu viɖe le kple didime ƒe liƒo na slitting, agbalẽ lãɖeɖe, precision ku lãɖeɖe, agbalẽtata kple laminating. Ele be dɔwɔwɔ ƒe nɔnɔmewo nakpɔ akpa si wofa la ta tso ƒoƒo, xexe alo ɖiƒoƒo me.
Woate ŋu azã PET si tsi tre ɖe asibidɛ ƒe dzesi ŋu abe ametakpɔnu alo atsyɔ̃ɖoɖo ƒe anyigba ƒe ƒuƒoƒo ene na asikakanuƒomɔ̃wo kple fesre siwo woɖena fiana. Ele be woado asikaka ame ŋu ƒe seselelãme, nukpɔkpɔ ƒe kadodo, adhesive ƒe sɔsɔ kple nukpɔkpɔ ƒe nuxexlẽ kpɔ kple kpekpe bliboa.
Fexexe ƒe mɔ̃ siwo ŋu woka asi enuenu le, ame ŋutɔ ƒe dɔwɔƒewo kple dutoƒo nyatakakawo ɖeɖefiaƒewo ɖea vi ne asibidɛwo ƒe dzedzeme bɔbɔ wu eye wotutu wo edziedzi bɔbɔe wu. Gblɔ abrasion kple tsitretsitsi si le dzadzɛ wu na beléle na ɖoɖowɔɖi si wokpɔ mɔ na.
PET ƒe nutsyɔnu siwo me kɔ ate ŋu akpɔ nɔnɔmetatawo kple nukpɔkpɔ teƒewo ta le mɔ̃wo ƒe mɔ̃wo, membrane switches kple operator panels dzi. Ele be woada atikewo ƒe tsitretsitsi, flex agbenɔƒe, agbalẽtata ƒe adhesion kple switch actuation ƒe nudidiwo kpɔ na xɔtutu tɔxɛa.
Woate ŋu abu film la ŋu na ʋuwo ƒe ɖeɖefia tiatia aɖewo, mɔ̃wo ƒe mɔ̃dzikpɔmɔ̃wo kple atsyɔ̃ɖonuwo ƒe elektrɔnikmɔ̃wo. Ele be dɔwo nada asi ɖe dzoxɔxɔ ƒe tsatsam, UV ƒe ʋuʋu, atike siwo wotsɔna klɔa nu ŋu, nukpɔkpɔ ƒe dzedzeme kple nutsyɔtsyɔ ƒe anyinɔnɔ dzi hafi woadze.
Wotrɔa PET resin wòzua agbalẽ alo film si me kɔ le nɔnɔme siwo dzi wokpɔna le eƒe titrime, kekeme kple eƒe anyigba ƒe nyonyome me. Ele be nusi wotsɔ ɖo anyi la nana wòanɔ gbadzaa, wòadze ƒã eye wòana eƒe didime nali ke si hiã na nutsyɔnu kple eƒe anyime tɔtrɔ ƒe ɖoɖoa.
Wotsɔa nutsyɔnu si wɔa dɔ la dea akpa si dze ŋgɔ nukpɔkpɔa eye wòdaa gbe le eŋu. Nusi wotsɔ blaa nu kple eƒe dɔyɔyɔ ƒe ɖoɖoae ɖoa anyigba ƒe ŋusẽ, keklẽ, asikaka eŋu ƒe seselelãme, alesi wòléna ɖe nu ŋu kple tsitretsitsi ɖe etutu enuenu ŋu. Hard-coat alo nukpɔkpɔ ƒe dɔ bubu siwo woate ŋu awɔ le wo ɖokui si bia be woatsɔ nutsyɔnu ƒe ƒuƒoƒo si ŋu wotrɔ asi le ɖe vovo.
Le nutsyɔtsyɔ megbe la, woate ŋu alé ŋku ɖe nusi wotsɔ wɔe ŋu be eƒe anyigba ƒe gbɔdzɔgbɔdzɔwo, nukpɔkpɔ ƒe ɖekawɔwɔ kple nutsyɔtsyɔ ƒe dɔwɔwɔ hafi woatsoe, atso agbalẽa eye woatsɔe aɖo duta. Woate ŋu agblɔ ametakpɔnu ƒe nutsyɔnu kple eŋudɔwɔwɔ dzadzɛ ne atsyɔ̃ɖoɖo ƒe nudidi sesẽwo le nusi wowɔ vɔ la ŋu.
Ele be mɔɖeɖe ƒe ɖoɖo si ŋu viɖe le nagbugbɔ nukpɔkpɔ, mɔ̃ɖaŋu kple dzadzɛnyenye ƒe didi siwo hiã le dɔdamɔnu mamlɛtɔ me la awɔ. Le dɔa nu la, nuƒlelawo ate ŋu agblɔe kɔte be:
Titrime, kekeme, gbadzaƒe, curl kple didime ƒe mɔɖeɖewo.
Kekeli ƒe kaka bliboa, ahomya, eme kɔ, keklẽ kple dziŋgɔli-ŋusẽ ƒe seɖoƒewo.
Asibidɛ ƒe dzesi ƒe dzedzeme, tsi/ami ƒe kadodo ƒe dzogoe alo dodokpɔ si dzi wolɔ̃ ɖo be wòakɔ bɔbɔe.
Pencil ƒe sesẽme kple abrasion tsitretsitsi ne ehiã be woatsɔ hard-coated grade.
Coating adhesion do ŋgɔ na nutome alo dzadzɛnyenye ƒe dodo kple emegbe.
Tsitretsitsi ɖe aha, atike si wotsɔna klɔa nu alo atike si wotsɔna klɔa nu ŋutɔŋutɔ si wozãna le dɔwɔwɔ me ŋu.
Nusiwo gblẽ le anyigba ŋu, ʋuʋudedi, gel, teƒe yibɔ, nutsyɔnu ƒe fliwo kple atsyɔ̃ɖoɖo ƒe seɖoƒe bubuwo.
Ta, adhesive, lamination kple ku-lãɖeɖe ƒe sɔsɔ kple kpekpe bliboa.
Shanghai Wallis Technology Co., Ltd. naa PET / PETG, PVC, polycarbonate kple acrylic agbalẽ kple film nu to adzɔnuwo wɔwɔ ƒe kadodo si me dɔwɔƒe adre le. Wallis doa alɔ B2B nuƒlelawo kple substrate tiatia, dzidzeme siwo wowɔ ɖe ɖoɖo nu, dɔwɔwɔ ƒe anyigba dzi atikewɔwɔ, kpɔɖeŋu ƒe dodokpɔ, wɔwɔ ƒe ɖoɖowɔwɔ kple nusiwo wotsɔ ɖoa duta ƒe babla.
Le dɔ si tsi tre ɖe asibidɛwo ƒe dzesi ŋu gome la, Wallis ƒe ƒuƒoƒoa ate ŋu alé ŋku ɖe dzedzeme si hiã, nukpɔkpɔ ƒe taɖodzinuwo, subɔsubɔ ƒe nɔnɔme, dzadzɛnyenye mɔnu kple tɔtrɔ ƒe ɖoɖo ŋu hafi adzra kpɔɖeŋu aɖe ɖo. Esia ɖea afɔku si le film tiatia si wotu ɖe nya 'kɔkɔ,' 'gloss' alo 'anti-fingerprint dzi ko dzi kpɔtɔna.'
Na titrime, kekeme, agbalẽ alo agbalẽ xatsaxatsa ƒe nɔnɔme si hiã, agbɔsɔsɔ, kekeli ƒe kaka, afu, keklẽ, anti-asibidɛ ƒe dodokpɔ, anyigba ƒe sesẽme, abrasion ƒe nudidi, atike siwo wotsɔna klɔa nu kple tɔtrɔmɔnu. Gblɔ hã nenye be nusi wotsɔ wɔe la hiã be woatae, alé nu ɖe eŋu, atsyɔ nu ametakpɔnu dzi, atso ku alo awɔe. Nusiwo wowɔ vɔ ƒe kpɔɖeŋu alo nɔnɔmetata ate ŋu ana woatia dzeside kabakaba.
Te ɖe Wallis ŋu hena Custom PET Film
Enye PET-gbadzɛ alo film si me kɔ si ŋu wotsɔ atike si wɔa dɔ le eƒe gowo dzi si ɖea asibidɛ ƒe amiwo ƒe dzedzeme alo woƒe ƒoƒo ɖe wo ŋu dzi kpɔtɔna eye wònana be nusiwo susɔ siwo bɔ la tutu nɔa bɔbɔe. Wozãnɛ le fesre siwo woɖena fiana, ʋuƒo kple nu bubu siwo ŋu woka asi le enuenu dzi.
Ao, asibidɛwo ate ŋu adzɔ kokoko. Taɖodzinuae nye be woana dzesiwo nagadze nyuie o, woaɖe ami ƒe ƒoƒo ɖe wo ŋu dzi akpɔtɔ alo woana dzadzɛnyenye nanyo ɖe edzi. Dɔwɔwɔ nɔ te ɖe nusi wotsɔ blae, akaɖi, anyigba ƒe keklẽ, ezãla ƒe kadodo kple dzadzɛnyenye ŋutinya dzi.
Ne dzeside si wotia la lɔ hard-coat ƒe dɔwɔwɔ si wodo kpɔ ɖe eme ko hafi. Anti-fingerprint kple scratch tsitretsitsi nye nɔnɔme vovovowo. Ne anyigba ƒe sesẽme le vevie la, gblɔ pɛnsil-sesẽme kple abrasion dodokpɔ si hiã na dɔwɔwɔ vɔ megbe.
Ao, atikewɔwɔ si tsia asibidɛ ƒe dzesi nu kpɔa ɖiƒoƒo siwo woate ŋu akpɔ kple dzadzɛnyenye gbɔ; mefia be eƒe gota xea mɔ na dɔlékuiwo, dɔlékuiwo alo nugbagbevi suesue bubuwo o. Dɔlékuiwutikewo ƒe dɔwɔwɔ bia be woawɔ atike vovovowo eye woado wo kpɔ si ŋu woda asi ɖo.
Da asibidɛ ƒe dzesi ƒe dzedzeme gbãtɔ alo dzogoe si dzi woate ŋu aƒoe ɖo kpɔ eye emegbe nàgbugbɔ dodokpɔa awɔ le teƒenɔlawo ƒe abrasion kple dzadzɛnyenye ƒe tsatsam megbe. Azɔ hã lé ŋku ɖe ʋuɖoɖo, haze, gloss, coating adhesion, scratches kple ɖekawɔwɔ kple kpekpe mamlɛtɔ ŋu.
Ẽ, woate ŋu atso dzeside siwo sɔ, atso agbalẽwo, ata wo, awɔ laminated kple die cut. Kpɔ egbɔ be akpa si wofa nu ɖo eye nàdo ink, primer, adhesive kple dɔwɔwɔ ƒe nɔnɔmewo kpɔ elabena anyigba si ŋu kɔ bɔbɔe ate ŋu aɖe adhesive dzi akpɔtɔ.
Gbugbɔgazã nɔ te ɖe nusi wotsɔ blae, nusi wotsɔna léa nu ɖe nu ŋu, ink, laminated layers, nutoa me nuƒoƒoƒu ƒe ɖoɖo kple gbugbɔgazã ƒe ɖoɖo dzi. Ele be nuƒlelawo nada xɔtutu si wowu enu bliboe la akpɔ tsɔ wu be woasusui be nusi ŋu wofa nu ɖo alo nusi wotsɔ lãgbalẽ wɔe la zɔna ɖe mɔ si dzi wogbugbɔ zãna le PET si womefa o dzi.
Ɛ̃. Wallis ate ŋu aƒo nu tso eƒe titrime, kekeme, agbalẽ alo agbalẽ xatsaxatsa ƒe nɔnɔme si wowɔ ɖe ɖoɖo nu, keklẽ, nukpɔkpɔ ƒe taɖodzinuwo, asibidɛ ƒe dzesi ƒe dɔwɔwɔ si tsi tre ɖe asibidɛ ƒe dzesi ŋu, awu sesẽ ƒe nudidiwo, ametakpɔnu ƒe nutsyɔtsyɔ kple nu babla mɔnu ŋu. Nusiwo li kple MOQ nɔ te ɖe nɔnɔme mamlɛtɔ si wogblɔ dzi.
Ðo titrime, kekeme, nɔnɔme, agbɔsɔsɔme, dɔwɔwɔ, ŋkume nudidiwo, anti-asibidɛ dzesi dodokpɔ, durability taɖodzinu, dzadzɛnyenye atikewo, tɔtrɔ ƒe ɖoɖo kple delivery destination. De nutata alo nufiame kpɔɖeŋu aɖe eme ne atsyɔ̃ɖoɖo ƒe dzedzeme le vevie ŋutɔ.
