|
kaɖi si wowu enu
Wallis ye nye esia
| Amadede: | |
|---|---|
| Nu: | |
| ŋusẽkpᴐkpᴐ: | |
| Mᴐbibia: | |
| Agbɔsɔsɔ: | |
Wallis naa sukuviwo ƒe ID gbalẽvi siwo wowɔ ɖe ɖoɖo nu siwo me laser dedienɔnɔ ƒe tiatia le na sukuwo, kɔledziwo, yunivɛsitiwo, hehenaƒewo, kple sukuxɔ me agbalẽvi siwo wotsɔ ƒoa ƒui. Woate ŋu atsɔ sukuviwo ƒe fotowo, ŋkɔwo, suku ƒe dzesiwo, ID xexlẽdzesi tɔxɛwo, sukunyatakakawo, kple dedienɔnɔ ŋuti nu tiatia aɖewo atrɔ asi le agbalẽviawo ŋu.
Míaƒe sukuviwo ƒe dzesidegbalẽvi siwo míewɔ ɖe ɖoɖo nu doa alɔ nuƒle le agbɔsɔsɔ gã me kple OEM dɔwo, kple {[t75 PVC , PET , kple PETG xɔtutu siwo li, amadede blibo ƒe agbalẽtata, holographic dedienɔnɔ si woate ŋu atia Overlay film s, barcode, QR code, kple RFID / NFC ɖoɖowo. Wodaa laser dzeside kpɔna le kaɖi ƒe nuzazãwo kple xɔtuɖoɖo siwo sɔ ŋu tsɔ wu be woasusui be na aŋekaɖi ɖesiaɖe si wozãna ɖaa.
Adzɔnuwo ŋuti nyatakaka kaba: CR80 kaɖi ƒe nɔnɔme si sɔ (85.6 × 54 mm), zi geɖe la, eƒe titrime nyea milimeta 0.76, eye woate ŋu awɔ woƒe lolome siwo wowɔ ɖe ɖoɖo nu kple nɔnɔme bubuwo ne wobia. Te ɖe Wallis ŋu kple wò kaɖi ƒe dɔbiagbalẽvi, dedienɔnɔ ƒe nudidiwo, agbɔsɔsɔme, kple asi si dzi nèyina be nàɖo kpe ɖoɖo si sɔ dzi.
Sukuwo ate ŋu agblɔ ɖoɖo si wowɔ ɖe ɖoɖo nu na klass alo sukuxɔ ɖesiaɖe, evɔ woalé foto ɖekaɖekawo kple sukuviwo ƒe nyatakakawo ɖe asi. Kpɔɖeŋu nɔnɔmetata siwo le ete la ɖe alesi woate ŋu ata kaɖiwo kple wo tɔtrɔ ɖe nɔnɔmewo ŋui fia.
Nusiwo gbɔna la ƒo nu tso sukuviwo ƒe agbalẽvi siwo wowɔ vɔ ŋu. Ele be woawu nuwo tiatia, xɔtutu, chip ƒe ɖekawɔwɔ, kple laser-dzeside ŋutete nu le mɔ̃ɖaŋununya me toto kple kpɔɖeŋu ƒe mɔɖeɖe me.
| Specification | Typical / Tiatia Siwo Woate Ŋu Atrɔ Asi Le |
|---|---|
| Nu si wowɔ | Sukuvi ƒe foto ID gbalẽvi / suku ƒe dedienɔnɔ ƒe dzesidegbalẽvi si wowɔ ɖe ɖoɖo nu |
| Kpekpeɖeŋugbalẽvi ƒe lolome | CR80 / ID-1 ƒe nɔnɔme: 85.6 × 54 mm ; lolome bubuwo le biabia nu |
| Wowu kaɖi ƒe titrime nu | Dzidzenu si bɔ: milimeta 0.76 (micron 760) ; bubuwo ƒe titrime siwo dzi woda asi ɖo |
| Nusiwo Wozãna | PVC , PET , PETG , kple xɔtuɖoɖo siwo sɔ; xɔtutu nɔ te ɖe agbalẽtata kple dzesidede mɔnu dzi |
| Agbalẽtata | Amadede ƒe agbalẽtata le axa ɖeka alo evea siaa; foto ɖekaɖekawo kple nuŋɔŋlɔ siwo trɔna |
| Ame ŋutɔ ƒe nɔnɔme | Sukuvi ƒe ŋkɔ, foto, xexlẽdzesi, dɔwɔƒe, klass, ɣeyiɣi si me wòle dɔ wɔm, xexlẽdzesi si wotsɔ ŋlɔa nu, barcode, alo QR code |
| Dedienɔnɔ ƒe nɔnɔmewo | Holographic Overlay film , UV ƒe nɔnɔme si woate ŋu atia, microtext, laser dzesidede le stock si sɔ dzi, alo ametakpɔnu si wotsɔ ƒo ƒui |
| Elektrɔnikmɔ̃wo ƒe nɔnɔmewo | Magnetic stripe alo RFID / NFC chip si woateŋu atia, si wotsɔ kaɖi xlẽla kple ɖoɖo si hiã la gblɔ |
| Anyigbadzinuwuwu | Gloss alo matte laminate si wotsɔa lãgbalẽ wɔe; bubuwo wu enu le nyayɔyɔ nu |
| Nutata / faɛl ƒe nyawo tsɔtsɔ de eme | AI, PDF, PSD, CDR, nutata siwo dzi woda asi ɖo, kple nyatakaka siwo trɔna ƒe faɛl siwo woɖo ɖe ɖoɖo nu abe alesi wolɔ̃ ɖe edzi ene |
| Nusiwo wobla ɖe agba me | Woɖoe ɖe hatsotso, dɔwɔƒe, sukuxɔ, alo dzeside si wowɔ ɖe ɖoɖo nu nu le afisi woɖoe le |
| MOQ | Zi geɖe la, agbalẽvi 500 le adzɔnu gbãtɔ ŋuti nyatakaka nu; ɖo kpe edzi na nɔnɔme ɖesiaɖe si wogblɔ |
| Kpɔɖeŋuwo & meliɖoɖo | Kpɔɖeŋuwo kple dukɔwo dome meliɖoɖo ƒe mɔnuwo le dɔa ƒe kpeɖodzi te |
Vovototo vevi: 25–30 micron holographic Overlay film alo laminate mesɔ kple 0.76 mm ƒe sukuvi ƒe ID gbalẽvi si wowu enu o. Overlay film -ele be woagblɔ film ƒe titrime kple finished-card ƒe titrime ɖe vovo le nuƒle ƒe sedede me.
Laser-nuŋɔŋlɔ nana dzesiwo nɔa nu alo laser-responsive layer dzi, le kaɖi ƒe wɔwɔme si wotia nu. Holographic security Overlay film s nye optical protective layers alo patterns siwo na be kɔpi wɔwɔ le vome kple tɔtrɔ sesẽna wu. Wonye nu vovovo siwo to vovo, eye woate ŋu azã wo ɖeɖe alo woatsɔ wo akpe ɖe dedienɔnɔ ƒe akpa bubu siwo ŋu woɖo kpee ŋu.
| Dedienɔnɔ Mɔnu | Nusi Wòwɔna | Bubuwo Na Nuƒlelawo |
|---|---|---|
| Laser nuŋɔŋlɔ / laser dzesi | Trɔ asi le kaɖi dzi nyatakaka siwo sɔ ŋu kple nuŋɔŋlɔ, xexlẽdzesiwo, alo nɔnɔmetatawo. | Bia be layers kawoe nye laser-responsive eye nàbia kpɔɖeŋu; generic PVC menye nusi woate ŋu atsɔ laser awɔ le eɖokui si o. |
| Holographic Overlay film / agbalẽ xatsaxatsa | Etsɔa nukpɔkpɔ ƒe ŋusẽkpɔɖeamedzi si wokpɔna, tiatiawɔblɔɖe ƒe kpɔɖeŋu, kple kpeɖodzinya bubu kpena ɖe eŋu. | Gblɔ nutata siwo wowɔ le mɔ vovovowo nu alo esiwo wowɔ ɖe ɖoɖo nu, teƒe si wole, woƒe anyinɔnɔ, kple laminate ƒomevi. |
| UV dedienɔnɔ ƒe agbalẽtata | Tsɔ aɖaŋu alo dzesi si woate ŋu akpɔ le UV kekeli si sɔ te kpee. | Kpɔ mɔnu si dzi woato alé ŋku ɖe nu ŋu kple akaɖi siwo sɔ dzi. |
| Microtext / fli nyuiwo tata | Etoa nyatakaka nyui siwo gbugbɔgawɔ sesẽna wu ne wotsɔ kɔpiwɔwɔ dzro aɖe ko la vɛ. | Ebia be woawɔ agbalẽtata ƒe ɖoɖo si sɔ eye woalé ŋku ɖe eƒe nyonyome ŋu. |
| Barcode / QR ƒe dzesi | Doa ka kple agbalẽvi si wota ƒe dzesidenu ɖe sukua ƒe nuŋlɔɖi alo dɔbiagbalẽvi aɖe ŋu. | Ðo kpe kɔpi ƒe nɔnɔme, tata ƒe vovototo, nyatakakawo ƒe yiyi, kple scanner ƒe ɖekawɔwɔ dzi. |
| RFID / NFC lãgbalẽ | Ate ŋu ado alɔ dɔwɔwɔ siwo me kadodo mele o ne woɖoe kple ɖoɖo si sɔ. | Kpɔ chip mɔ̃ɖaŋununya, frequency, reader, encoding, kple access mɔɖeɖewo dzi hafi nàwɔe. |
Nu ɖeka aɖeke meli si wota alo esi woate ŋu akpɔ le nukpɔkpɔ me si nana be womate ŋu atrɔ asi le sukuvi ƒe ID ŋu keŋkeŋ o. Nusiwo wotsɔ ƒo ƒui si sɔ nɔ te ɖe sukua ƒe afɔku ƒe nɔnɔme, kpeɖodzinana ƒe dɔwɔwɔ, kple ɖoɖoa ƒe ɖoɖowɔwɔ dzi.
Kpekpeɖeŋugbalẽvi si wowɔ na ame ŋutɔ nana dɔwɔlawo te ŋu léa ŋku ɖe sukuvi aɖe ƒe foto, ŋkɔ, kple habɔbɔ si me wòle ŋu. Sukuwo ate ŋu ade vovototo sukuviwo, dɔwɔlawo, amedzrowo, kple kontraktɔwo dome to nukpɔkpɔ ƒe ɖoɖo siwo mewɔa tɔtrɔ o kple akpa si woawɔ ƒe dzesiwo dzi.
Sukuviwo ƒe xexlẽdzesi si woate ŋu axlẽ alo kɔpi si woate ŋu awɔ scan na le kaɖiwo dzi be woatsɔ ado alɔ dɔwɔwɔwo abe agbalẽdzraɖoƒe ƒe gadodo, ŋkɔ ŋɔŋlɔ, wɔnawo xɔxɔ, kple klass dede ne wodo ka kple dɔwɔƒea ƒe kɔmpiutadziɖoɖowo.
Kpekpeɖeŋugbalẽviwo wɔwɔ si nɔa anyi didi kple dedienɔnɔ ƒe agbalẽtata si woate ŋu atia ate ŋu akpe ɖe ame ŋu be woaxe mɔ ɖe tɔtrɔ siwo wowɔna le vome nu eye wòana ŋkuléle ɖe nu ŋu nanyo ɖe edzi. Kpekpeɖeŋugbalẽvi ŋutɔŋutɔwo nye kpeɖodzinana ƒe ɖoɖo si keke ta wu ƒe akpa ɖeka, ke menye esiwo woatsɔ aɖɔli dɔdzikpɔlawo ƒe mɔ̃wo alo kɔmpiutadziɖoɖo siwo kpɔa amewo ƒe gege ɖe eme dzi o.
Ame ŋutɔ ƒe dɔwɔwɔ ƒe akpawo ate ŋu anye suku alo yunivɛsiti ƒe ŋkɔ, sukuvi ƒe foto, ŋkɔ gbãtɔ kple mamlɛtɔ, sukuvi ƒe xexlẽdzesi, klass, nufiala, suku ƒe, ŋkeke si dzi wòawu enu, kple sukua ƒe kadodo ŋuti nyatakakawo. Nyatakaka siwo hiã na zazã si nèdi be yeazã koe de eme.
Wallis ate ŋu awɔ dɔ kple suku ƒe dzesiwo, dɔwɔƒe ƒe amadedewo, nɔnɔmetata siwo wotu ɖe akpa si wowɔ dzi, kple nɔnɔmetata siwo le akpa eve. Woate ŋu azã atsyã vovovowo na sukuviwo, nufialawo, dɔwɔlawo, kple sukuxɔ vovovowo.
Woate ŋu ata dzesidexexlẽdzesi siwo trɔna kple kɔda siwo woate ŋu awɔ scann la to ɖoɖo si dzi dɔwɔƒea da asi ɖo la zazã me. Barcode alo QR code nye dzesidenu alo kadodo; le eɖokui si meɖoa kpe agbalẽvixɔla aɖe dzi alo naa xɔ si me woate ŋu age ɖo dedie o.
Tia matte alo gloss surfaces eye nàdzro dedienɔnɔ ƒe ƒuƒoƒo bubuwo abe holographic designs, fine-line artwork, kple UV features me. Ele be woagblɔ nɔnɔme mamlɛtɔ si wotsɔ de eme kple nenye be woda asi ɖe kpɔɖeŋuwo dzi.
PVC wozãna zi geɖe na dzesidegbalẽvi siwo wota elabena edoa alɔ kaɖi-ame ŋutɔ ƒe dɔwɔwɔ ƒe ɖoɖo siwo woɖo anyi kple agbalẽtamɔ̃ ƒe dɔwɔwɔ ƒe ɖoɖo siwo keke ta. Kpɔe ɖa be esɔ ne ehiã be woawɔ lamination alo laser ƒe dzesi tɔxɛwo.
Woateŋu ada PET kple PETG -siwo wotu ɖe xɔtuɖoɖowo dzi akpɔ ɖe asisiwo ƒe nudidi tɔxɛ siwo ku ɖe anyinɔnɔ, lamination, kple agbalẽtata ƒe nyonyome ŋu. Plastik ƒuƒoƒo vovovowo kple nusiwo wotsɔ kpe ɖe eŋu wɔa nu le mɔ vovovowo nu le dzoxɔxɔ kple laser te, eyata kpɔɖeŋuwo kple dɔwɔwɔ ƒe kpeɖodzi le vevie.
Ne èdi ŋkɔ, foto, alo nyatakaka nyui siwo wotsɔ laser kpa la, bia xɔtuɖoɖo si dze koŋ na dzesidenu si nèdi be yeazã. Bia Wallis be wòaɖo kpe nyatakaka siwo wota, wokpa, alo wokpɔ ta na le laminate te dzi.
Le afisiwo wòhiã le la, woate ŋu agblɔ agbalẽvi siwo dzi womate ŋu aƒo ka na o na sukuxɔa me yiyi ƒe ɖoɖo. Ele be kaɖi ƒe mɔ̃ɖaŋununya nyuitɔ nasɔ kple nuxlẽla siwo li fifia, nuŋɔŋlɔ ƒe ɖoɖo, kple ɖaseɖigbalẽwo dzikpɔkpɔ ƒe ɖoɖowo.
Woate ŋu azã ID siwo wota, barcode, QR code, alo ɖaseɖigbalẽ siwo ŋu womeƒoa ka ɖo o hena agbalẽdzraɖoƒe ƒe nuŋlɔɖiwo, nudzɔdzɔwo me toto, dodokpɔ ƒe amenyenye me dzodzro, kple vavalawo ƒe dɔwɔwɔ, le sukua ƒe megbenyawo nu.
Dɔwɔƒe aɖewo zãa agbalẽvi siwo dzi woate ŋu awɔ dɔ vovovowo le hena nuɖuɖu alo sukuxɔa me dɔwɔnawo. Dɔ siawo bia nuxlẽla siwo sɔ, gakɔntadzikpɔkpɔ, kple fexexe ƒe ɖoɖo ɖesiaɖe si sɔ; kaɖi tata menaa ɖoɖo mawo le eɖokui si o.
Suku ƒe dzeside si nɔa anyi ɖaa: sukuviwo kple dɔwɔlawo ƒe agbalẽvi ate ŋu ama dɔwɔƒe ƒe ɖoɖo si dzi woda asi ɖo.
Dedienɔnɔ si woate ŋu atrɔ asi le: ƒo kpeɖodzi si woate ŋu akpɔ, nukpɔkpɔ ƒe nɔnɔmewo, kple dijitaal ɖaseɖigbalẽ siwo woate ŋu atia nu ƒu.
Batch personalization: wɔ card series na klasswo, dɔwɔƒewo, sukuxɔ geɖewo, alo ƒe sia ƒe ƒe yeyewɔwɔ.
Gbesiagbe zazã si nɔa anyi didina: tia nusiwo sɔ kple nusiwo woatsɔ awu enu be woatsɔ awɔ dɔe enuenu.
Nuƒlela koŋ ƒe nuwɔwɔ: wɔ ɖoɖo ɖe agbalẽtata, babla, xexlẽdzesiwo, kple eɖoɖo ɖe amewo ŋu le nuƒle ƒe ɖoɖoa ŋu.
Gɔmedzesukuwo kple sekɛndrisukuwo: dzesidegbalẽviwo, sukua ƒe dɔwɔnawo, kple amedzrowo ƒe ɖaseɖigbalẽ siwo dzi woda asi ɖo.
Kɔledziwo kple yunivɛsitiwo: sukuxɔ me dzesidegbalẽvi, sukuviwo ƒe dɔwɔƒewo, agbalẽdzraɖoƒewo, kple dodokpɔwo.
Xɔdɔmesukuwo kple xɔdɔmewo: dzesidede kple gege ɖe eme ƒe ɖoɖo siwo sɔ le afisiwo wowɔe le.
Hehenaƒewo kple sukuwo: klass ƒe mɔɖeɖe, vava ŋuti nuŋlɔɖiwo, kple nusɔsrɔ̃ ƒe ɖaseɖigbalẽwo.
Sukudede mamalawo kple ɖoɖowo ƒe ƒuƒoƒo: agbalẽvi siwo wota ɖe ɖoɖo nu le agbɔsɔsɔ gã me na dɔwɔƒewo ƒe dɔwɔwɔ.
Ele be kaɖi ƒe ɖoɖoa nasɔ kple dɔwɔƒea ƒe zazã ŋutɔŋutɔ, si me ametakpɔkpɔ ŋuti ɖoɖowo kple nuxlẽla alo scanner ƒomevi si le dɔ wɔm xoxo hã le.
Gblɔ kaɖiawo ƒe xexlẽme, woƒe lolome, nusiwo wotsɔ wɔe, woƒe titrime, woƒe gota gome, dedienɔnɔ ƒe nɔnɔmewo, agbalẽtata ƒe axawo, chip alo code ƒe nudidiwo, kple teƒe si wobia be woatsɔ wo ayi na Wallis.
Na nutatawo le nɔnɔme si dzi wolɔ̃ ɖo me, abe PDF alo AI ene, tsɔ kpe ɖe nɔnɔmetata si ɖe sukuviwo ƒe akpa siwo hiã la fia ŋu. To mɔnu si le dedie, si dzi wolɔ̃ ɖo, si dzi sukua ƒe mɔɖeɖe si sɔ le ko dzi ma ameŋunyatakaka ŋutɔŋutɔwo.
Hafi nàwɔe le agbɔsɔsɔ gã me la, lé ŋku ɖe ŋɔŋlɔdzesiwo, fotowo ƒe nyonyome, teƒe si woɖo wo ɖo, alesi woate ŋu axlẽ barde, alesi woatrɔ asi le wo ŋu nyuie, kple laser alo holographic ƒe ŋusẽkpɔɖeamedzi ɖesiaɖe ŋu. Kpɔe ɖa be elektrɔnik kaɖi ƒe nuŋɔŋlɔ hã le eme.
Ne woda asi ɖe nutatawo kple woƒe nɔnɔmewo dzi vɔ la, wɔ ɖoɖo ɖe hatsotsowo me toto, wo babla ɖe hatsotso alo dɔwɔƒe nu ne ehiã, woƒe nyonyome me dzodzro, kple wo ɖoɖo ɖe wo. Ɣeyiɣi si woatsɔ awɔ dɔe nɔ te ɖe agbɔsɔsɔ, alesi woda asi ɖe edzi, kple nɔnɔme tiatia dzi.
Te ɖe Wallis ŋu hena ID Card wɔwɔ si wowɔ ɖe ɖoɖo nu
| Quotation Detail | Nyatakaka Siwo Woama |
|---|---|
| Ðoɖowɔwɔ kple eŋudɔwɔwɔ | Suku, yunivɛsiti, hehenaƒe, mama, alo ɖoɖo ƒe ƒoƒo ɖekae ƒe dɔ |
| Agbɔsɔsɔ | Kpekpeɖeŋugbalẽviwo katã ƒe xexlẽme, alesi wokpɔ mɔ be woagbugbɔ aɖo wo ɖe ɖoɖo nu, kple agbalẽvi siwo wowɔ na ame ɖekaɖekawo ƒe xexlẽme |
| Kpekpeɖeŋugbalẽviwo tutu | PVC / PET / PETG nusi wodi, CR80 alo lolome si wowɔ ɖe ɖoɖo nu, kple taɖodzinu ƒe titrime |
| Dedienɔnɔ ƒe nudidiwo | Hologram ƒomevi, laser-dzesidede nudidi, UV tata, ametakpɔnu laminate, alo microtext |
| Nudidiwo le ɖoɖoa me | QR/barcode ƒe nɔnɔme, RFID / NFC chip ƒe kpɔɖeŋu, nuxlẽla ƒe ƒomevi, encoding/xexlẽdzesi ƒe nɔnɔme |
| Nutatawo kple nyatakakawo | Brand files, proofing needs, variable field template, kple nenye be fotowo le eme |
| Nuwuwu kple wo babla | Matte alo gloss surface, wodi be woatsɔ aɖo wo ɖe hatsotsowo me, ŋkɔwo, kple kaɖi ƒe kpeɖeŋutɔ ne ehiã |
| Nuwo ɖoɖoɖa | Ðo ŋkeke si dzi woaɖoe ɖe wò, dukɔ si me nàɖoe, kple nusiwo nèdi be yeaɖoe |
Le suku siwo bia nu le agbɔsɔsɔ gã me gome la, zi geɖe la, MOQ si wota si dzea egɔmee nyea agbalẽvi 500 ; kaɖi ƒe xɔtutu tɔxɛwo alo encoding ƒe nudidiwo ate ŋu akpɔ ŋusẽ ɖe nu suetɔ kekeake dzi. Bia be woayɔ nyayɔyɔ na ɖoɖowɔɖia ŋutɔŋutɔ.
Wallis naa kaɖi ƒe nuwɔna siwo woateŋu atrɔ asi le kple kaɖi ƒe nuzazãwo gbɔkpɔnu na duta dɔwɔƒe ƒe nuƒlelawo, mamalawo, kple OEM ɖoɖowo. Adzɔnuwo ƒe hatsotso na nuƒlelawo te ŋu dzroa agbalẽtata, nusiwo woatia, dedienɔnɔ ƒe nuwuwu, nyatakaka siwo trɔna, kple nusiwo wobla ɖe duta me kple nudzrala ɖeka.
Habɔbɔ ƒe dzesidenu siwo wowɔ ɖe ɖoɖo nu, amadedewo, nɔnɔmetatawo, kple sukuviwo ƒe ame ŋutɔ ƒe tɔtrɔ ƒe agblewo.
Standard CR80 kple dɔa koŋ ƒe kaɖi ƒe xɔtutuwo.
Dedienɔnɔ ƒe tiatia abe holographic effects, agbalẽtata nyuie, kple laser-dzesidemɔnu tiatia aɖewo ene.
Kpekpeɖeŋu na barcode, QR code, magnetic stripe, kple RFID / NFC ƒe nudidiwo le esi woate ŋu alé ŋku ɖe woƒe sɔsɔ ŋu.
Nutatawo ƒe kpeɖodzi, kpɔɖeŋu numedzodzro, nudɔdɔ gbogbo aɖewo ƒe babla, kple dutanyigbawo ɖoɖo ɖe duta ƒe ɖoɖowɔwɔ.
Le ɖoɖowɔɖi siwo ƒe dedienɔnɔ lolo wu alo esiwo nɔa te ɖe nuxlẽla dzi gome la, bia nyatakaka siwo ŋu woƒo nu tsoe ƒe agbalẽvi kple kpɔɖeŋu ŋutɔŋutɔ hafi nàda asi ɖe nudɔdɔ gbogbo aɖe dzi.
Wolé asisiwo ƒe nyaŋuɖoɖo gbãtɔ ƒe nɔnɔmetata siwo gbɔna la ɖe asi tso Wallis ƒe adzɔnuwo ƒe axa dzi. Ele be woaɖo kpe nya tɔxɛ siwo wogblɔ, asisiwo ƒe ŋkɔ, kple nudɔdɔ ŋuti nyatakakawo dzi le wo ɖokui si hafi aɖɔ wo be wonye adzɔnuwo ƒe ɖaseɖigbalẽwo alo dɔwɔwɔ ƒe kakaɖedzi.
Sukuvi ƒe ID-gbalẽvi si wowɔ ɖe ɖoɖo nu nye ɖaseɖigbalẽ ŋutɔŋutɔ si wowɔ na ame ŋutɔ si ɖea nyatakaka siwo suku aɖe tia, abe sukuvia ƒe foto, ŋkɔ, ID xexlẽdzesi, kple dɔwɔƒea ene fiana. Woate ŋu agblɔ dedienɔnɔ ƒe agbalẽtata si woate ŋu atia alo elektrɔnik mɔ̃ɖaŋununya si sɔ na sukua ƒe dɔwɔwɔ tɔxɛwo.
Kpekpeɖeŋugbalẽvi ƒe nɔnɔme si bɔ enye CR80 (85.6 × 54 mm), zi geɖe la, eƒe titrime nyea milimeta 0.76. Ele be woaɖo kpe lolome kple titrime siwo wowɔ ɖe ɖoɖo nu dzi na agbalẽvi si nètia kple nuxlẽla alo nulénu.
Wallis ƒe adzɔnuwo ŋuti nyatakaka siwo li fifia ɖee fia be MOQ si wozãna zi geɖe nyea kaɖi 500, eye woate ŋu awɔ ɖoɖo ɖe dodokpɔ ƒe nudɔdɔ suewo ŋu. MOQ ateŋu atrɔ kple laser dzesidede, RFID chips, alo nudidi tɔxɛ bubuwo.
Ɛ̃. Woate ŋu azã foto ɖekaɖekawo, ŋkɔwo, ID-wo, suku ƒewo, barcode-wo, kple QR-kɔdawo le nyatakakawo tata ƒe dɔ si me woate ŋu atrɔ asi le me, le nɔnɔmetata si dzi woda asi ɖo kple sukuviwo ƒe nyatakakawo gbɔ kpɔkpɔ dedie nu.
Ao, laser ƒe nuŋɔŋlɔ dea dzesi kaɖi ƒe nu siwo sɔ alo ƒuƒoƒo siwo ɖoa nya ŋu, gake holographic Overlay film ya tsɔa nukpɔkpɔ ƒe dedienɔnɔ ƒe nɔnɔmewo kpena ɖe kaɖia ƒe anyime alo le eme. Bia ɖoɖo si le wò nudɔdɔa me hã.
ID-gbalẽvi aɖeke meli si ŋu woate ŋu atrɔ asi le keŋkeŋ o. Ame ŋutɔ ƒe nɔnɔmewɔwɔ ƒe mɔnu siwo sɔ, laminate ƒe nɔnɔme, nusiwo wota, kple dɔwɔwɔ ƒe dodokpɔ ate ŋu akpe ɖe ame ŋu be woaxe mɔ ɖe tɔtrɔwo nu eye woaɖe kɔpi bɔbɔe dzi akpɔtɔ.
Ẽ, woateŋu agblɔ RFID / NFC xɔtutu si sɔ. Na wò nuxlẽla ƒe ƒomevi, chip mɔ̃ɖaŋununya si hiã, frequency, access-control format, kple encoding ƒe nudidiwo hafi nàwɔe.
Ẽ, aɖaŋua ate ŋu anye kɔpi siwo woate ŋu awɔ scann. Ele be sukua nagblɔ nyatakakawo ƒe ɖoɖo, scanner ƒe nudidiwo, kple alesi kɔda mawo do ƒome kple eƒe dɔdzikpɔɖoɖoa.
Tiatia siwo bɔ dometɔ aɖewoe nye PVC , PET , PETG , kple xɔtuɖoɖo siwo sɔ. Ele be woaɖo kpe nusiwo woatia dzi le agbalẽtata, lamination, anyinɔnɔ, kple laser-dzesidede ƒe nudidiwo nu.
0.76 mm ƒe dzidzenua ɖɔa ID-gbalẽvi si wowu enu si bɔ. Zi geɖe la, dzidzenu abe micron 25 ene ɖɔa Overlay film alo film ƒe ƒuƒoƒo si le tsɛ wu sã. Mele be woazã wo ɖe wo nɔewo teƒe o.
Kpɔɖeŋu numedzodzro kple nutatawo dzi dada nye numekuku ƒe ɖoɖoa ƒe akpa aɖe. Ele be woalɔ̃ ɖe alesi woawɔ kpɔɖeŋu si wowɔ na ame ŋutɔ ƒe anyinɔnɔ, asi, eƒe nɔnɔme, kple ɣeyiɣi si woatsɔ awɔe dzi hafi abia.
Ma agbɔsɔsɔme, atsyã, kaɖi ƒe lolome, nusi wotsɔ wɔe, eƒe titrime, ame ŋutɔ ƒe nudidiwo, dedienɔnɔ ƒe nɔnɔmewo, chip ŋuti nyatakaka siwo nàte ŋu atia, nubablɛwo, kple teƒe si woɖoe ɖe wò. Mègaɖo sukuviwo ƒe nuŋlɔɖi siwo woate ŋu ade dzesii to nyabiase gbalẽvi si ŋu dedienɔnɔ mele o dzi o.
Eɖanye be èhiã sukuviwo ƒe fotogbalẽvi siwo wota le agbɔsɔsɔ gã me , holographic security ID cards , alo sukuviwo ƒe ID gbalẽvi ƒe ɖoɖo si sɔ RFID , ɖo wò nudidiwo ɖe Wallis hena mɔ̃ɖaŋununya me toto, kpɔɖeŋu numedzodzro, kple dɔa ƒe nyayɔyɔ.
