|
Wallis -PLA takardar
| Launi: | |
|---|---|
| Girma: Abu: | |
| Aikace | |
| -aikace: | |
| fa'ida: | |
| Yawan: | |
WALLIS al'ada PLA katin takardar takardar an tsara shi don masu kera kati, firintoci, masu canza launi na RFID, masu siyar da katin kyauta da shirye-shiryen katin mai dorewa mai dorewa don neman madadin tushen rayuwa zuwa kayan aikin PVC na al'ada. Zaɓuɓɓukan da ke akwai sun haɗa da farar fata, bayyananne, baƙar fata da zanen launi na al'ada a cikin ma'auni masu yawa don bugu, mai rufi, katunan talla, katunan membobin, katunan maɓallin otal da zaɓaɓɓun ginin RFID.
Samar da katin PLA yana amfani da taga tsari daban-daban daga PVC, PETG da polycarbonate. Buga tawada, saman jiyya, takardar daidaitawa, lamination zafin jiki, matsa lamba, sanyaya, m zabin, mutu yankan da gama-kati gwajin ya kamata a inganta a matsayin daya tsarin. Ana ba da shawarar samfuran gwaji kafin samarwa da yawa, musamman don multilayer, RFID, Magnetic-stripe da ayyukan katin sabis na tsawon rai.
' tushen halitta, ' ' mai yiwuwa, ' ' takin masana'antu ' da 'mai sake yin amfani da su' suna bayyana halayen muhalli daban-daban. Duk wani da'awar yakamata yayi daidai da ainihin makin PLA da cikakken ginin katin da aka gama. Chips, eriya, inks, overlays, adhesives, Magnetic ratsan da sutura na iya canza hanyar ƙarshen rayuwa kuma suna iya hana ƙaƙƙarfan katin cancantar da'awar takin zamani.
| Nau'in Samfur | Babban takardar katin PLA, takardar da za a iya bugawa da takamaiman kayan aikin rufin katin |
| Daidaitaccen Kauri | 0.08mm, 0.15mm, 0.17mm, 0.20mm da 0.35mm; sauran ma'auni da ke ƙarƙashin nazarin samarwa |
| Daidaitaccen Girman Sheet | 300 × 480mm ko girman da aka keɓance bisa ga buƙatun bugu da shimfidar kati |
| Zaɓuɓɓukan launi | Farar fata, bayyananne, mai jujjuyawa, baƙar fata ko launi na musamman dangane da MOQ da ƙira |
| Aikace-aikacen Kati | Kyauta, zama memba, aminci, taron, maɓallin otal, kasuwanci, talla da zaɓaɓɓun katunan RFID |
| Ayyukan B2B | Samfurin zanen gado, ma'auni na al'ada, gwaje-gwajen bugu, gwajin lamination, bitar tsarin-kati, ƙayyadaddun QC da wadatar fitarwa |
Nemi Samfurori na Katin PLA da Quote
Polylactic acid, wanda aka fi sani da PLA, polyester ne na thermoplastic wanda za'a iya samarwa daga kayan ciyarwar da aka samu daga tsire-tsire. Don kera kati, PLA tana jujjuya zuwa zanen gado waɗanda za su iya aiki azaman bugu na ainihin bugu, Layer na ado, madaidaicin Layer ko Layer mai goyan baya a cikin tsarin katin laminated.
Asalin sabuntawa na PLA baya bada garantin dorewar kati ta atomatik, mannewar bugawa ko takin zamani. Guduro sa, crystallinity, Additives, pigment, takardar fuskantarwa da kuma katin gina kayyade na karshe inji, thermal da muhalli Properties.
Yawancin samfuran PLA an tsara su don sarrafa takin masana'antu tare da sarrafa zafi, danshi da iska. Bai kamata a siffanta takardar PLA da saurin ɓacewa a cikin ƙasa, ƙasa ta ƙasa, koguna ko tekuna ba. Dole ne a tantance ƙaƙƙarfan katin a matsayin cikakken abu kafin a yi amfani da tambarin takin zamani ko da'awar.
Babban takardar thermoforming PLA maiyuwa bazai samar da kwanciyar hankali, rashin ƙarfi na sama, iya bugawa ko halayen lamination da ake buƙata don samar da katin ba. Ya kamata masu siye su nemi ƙayyadaddun darajar-kati kuma su gwada ainihin takardar tare da matsi, tawada, mai rufi da laminators.
Takardar PLA don Samar da Kati Mai Dorewa
| na | Musamman Takaddamawa / Buƙatun Aiki |
|---|---|
| Kayan abu | PLA ko ingantaccen tsarin katin PLA; ya kamata a kulle ainihin fakitin guduro da ƙari ta lambar samfur |
| Kauri | 0.08, 0.15, 0.17, 0.20 da 0.35mm ko musamman; ya kamata a amince da haƙuri ga kowane ma'auni |
| Girman Sheet | 300 × 480mm ko tsari na musamman dangane da sanyawa, latsa gado da farantin lamination |
| Ƙarfin Ƙarfi | Hanyar injin ≥25MPa (darajar magana); tabbatar da hanyar gwajin da aka yarda, sanyaya da buƙatun karkatacciyar hanya don kowane oda |
| Tashin Lafiya | 0.8-3.0μm nuni iyaka; zaɓi bisa ga bugu, riƙe tawada da buƙatun lamination |
| Ƙarshen Sama | Matte, Semi-matte, mai sheki, Corona-magani ko mai rufin saman da za a iya aiwatar da gwaji |
| Launi | Fari, bayyananne, baƙar fata, Pantone na al'ada ko darajojin da ke sarrafa sarari ga tsari da MOQ |
| Shiryawa | Filayen lebur tare da fim mai karewa ko tsaka-tsaki, shirya kayan shamaki, kwali da kariyar pallet |
Ƙarshen katin shaida ana gina shi ne daga yadudduka da yawa maimakon takarda mai kauri ɗaya. TS ISO/IEC 7810 yana gano tsarin katin ID-1 na gama gari a kusan 85.60 × 53.98mm tare da kauri mai ƙima na 0.76mm. Madaidaicin haɗin Layer PLA dole ne a lissafta bugu, manne, mai rufi, guntu ko kaurin eriya da raguwar lamination bayan.
| na Layer | Aikin PLA Na Musamman | La'akarin |
|---|---|---|
| Rufewar gaba | Yana kare bugu kuma yana ba da ƙarewar ƙasa | Tabbatar da haɗin kai, tsabta, juriya da da'awar muhalli |
| Buga Core Sheet | Yana ɗaukar hotuna, rubutu, ƙirar tsaro da launi na bango | Jiyya da tsarin tawada dole ne su tsira daga lamination ba tare da canza launi ko lalata ba |
| Cibiyar Core | Yana gina kauri, rashin fahimta da taurin lankwasawa | Yi amfani da daidaitaccen daidaitawa da ginin ma'auni don rage curl |
| RFID Inlay Layer | Ya ƙunshi guntu da eriya don aikin mara lamba | Asusu don kaurin inlay, mannen eriya, rami guntu da matsin lamination |
| Fayil ɗin Buga na Baya / Mai rufi | Yana ba da juzu'i masu hoto da kariya ta saman | Daidaita yadudduka na gaba da baya don sarrafa canjin girma |
Yaduddukan gaba da baya mara daidaituwa na iya haifar da curl bayan dumama da sanyaya. Inda zai yiwu, yi amfani da ma'aunin ma'auni, ɗaukar hoto iri ɗaya da ma'auni mai ma'ana a ɓangarorin biyu. Ya kamata a duba katunan da aka gama bayan an daidaita su, ba kawai nan da nan bayan lamination ba.
Tawada, m, RFID inlay, Magnetic stripe da kuma kariya shafi duk suna ba da gudummawa ga kauri na ƙarshe. Tarin takarda mara izini wanda ya kai 0.76mm kafin lamination na iya ba zai samar da ingantaccen katin da aka gama ba bayan matsawa da raguwa.
| Shirye-shiryen Filaye | Mai yuwuwar Amfani | da Bukatar Tabbatarwa |
|---|---|---|
| Bugawa Kashe | Zane mai girma tare da launi tsari, Pantone da bayanan tsaro | Manne tawada, bushewa, toshewa, yawan launi da juriya |
| UV Inkjet | Gajerun gudu, keɓancewa, zane-zane na serial da samfuri | Ƙarfin sararin samaniya, matakin magani, sassauƙa, ƙamshi da haɗin kai |
| Buga allo | Farar fata mara kyau, ƙarfe, launi tabo da yadudduka masu aiki | Kaurin tawada, dacewar ƙarfi, curing da lamination bond |
| Indigo / Digital Printing | Bayanai masu canzawa, gajerun gudu da shirye-shiryen katin keɓaɓɓen | Daidaitawar farko, zafin bargo, mannewar toner da lamination na ƙasa |
| Zazzage / Sake Canja wurin Keɓancewa | Ƙarshen-kati, hotuna, lambar sirri da takaddun shaida | Fuskantar zafi, canja wurin kintinkiri, flatness da gwajin jigilar firinta |
Maganin Corona na iya lalacewa yayin ajiya. Masu saye da ke amfani da tawada UV, bugu na allo ko sutura na musamman yakamata su yarda akan matakin dyne mai niyya, hanyar gwaji da matsakaicin lokacin ajiya kafin bugu.
Kyakkyawan mannewa bugu na farko baya bada garantin juriya ga zafi, matsa lamba da mannewa lamba. Ya kamata a liƙa, sanyaya da kuma gwada bawo kafin a amince da tsarin zane da tawada.
Takardar Katin PLA Mai Bugawa
Lamination da Juyawa Gwaje-gwaje
PLA yawanci yana laushi a ƙananan zafin jiki fiye da PVC, PETG ko kayan katin polycarbonate. Daidaitaccen girke-girke na lamination na PVC na iya haifar da raguwa mai yawa, alamar ƙasa, murdiya, toshewa ko lalata guntu. Ya kamata a haɓaka madaidaicin sake zagayowar tare da ainihin tari da kayan aiki.
Sanya zanen gado: Ajiye da daidaita takaddun PLA, yadudduka da aka buga da inlays ƙarƙashin yanayin zafi da zafi mai sarrafawa.
Tabbatar da daidaitawa: Rike na'ura da jujjuyawar kwatance daidai a cikin tari don sarrafa raguwa.
Fara da zagayowar zafi mai ra'ayin mazan jiya: Yi amfani da gwajin ƙananan zafin jiki fiye da na al'ada na PVC kuma ƙara kawai bayan nazarin ƙarfin haɗin gwiwa da girma.
Ma'auni zafin jiki, matsa lamba da zama: Matsi mai yawa na iya yin alama a saman ko lalata abubuwan RFID; rashin isasshen makamashi na iya haifar da delamination.
Cool ƙarƙashin matsi mai sarrafawa: sanyaya yana rinjayar flatness, raguwa da toshewa.
Yanayi kafin aunawa: Bincika girma, lanƙwasa, mannewa da kaurin katin bayan lokacin dawo da aka yarda.
Kulle girkin da aka yarda da shi: Nau'in farantin rikodi, daidaitawar tari, bayanin martabar zafin jiki, matsa lamba, lokaci da yanayin sanyaya.
Wasu yadudduka na PLA masu jituwa na iya haɗawa da thermally, yayin da wasu sifofi na buƙatar manne ko taye. Ya kamata a kimanta tsarin haɗin kai da aka zaɓa don ƙarfin kwasfa, tsufa, daidaiton bugawa da tasirin sa akan da'awar muhalli.
Mai sheki, matte da faranti masu rubutu suna haifar da bayyanar yanayi daban-daban da halayen sakin. Gwada fina-finai na sakin da farantin da aka gama don mannewa, hazo, bambancin haske da canja wurin rubutu maras so.
| Canza Maɓallin | Maɓallin Mataki |
|---|---|
| Sheet Guillotine Yanke | Kaifi mai kaifi, tari mai goyan baya, ƙarancin ƙarancin zafi da daidaiton girma |
| Punching Card | Tsabtace kayan aiki, zafin jiki, daidaitawar kati da rashin fashe kusurwa |
| Ramin da Hole Punching | Farin fata na gefe, hankali mai daraja, matsayin rami da juriya mai ɗaukar nauyi |
| Chip Cavity Milling | Gudun yankan, zafi, cire ƙura, zurfin rami da haɗin gwiwa |
| Gefen dubawa | Burrs, delamination, fasa, fari, kaifi da rajistar Layer |
Ana iya kimanta takardar katin PLA don katunan da ba su da lamba, amma takardar sashi ɗaya ce kawai na tsarin. Eriya, guntu, inlay substrate, m da lamination sake zagayowar dole ne su kasance da ƙarfi ta lantarki da injina a duk lokacin samarwa da sabis na katin.
| Buƙatun Katin Smart | Abun Tabbatar da |
|---|---|
| Frequency RFID da Chip | Tabbatar da tsarin mai karatu, dangin guntu, ƙwaƙwalwar ajiya, ƙa'ida da buƙatun ɓoye kafin gina samfuran |
| Geometry na Antenna | Tabbatar da gefen katin, guntu matsayi da yanke shimfidar wuri ba sa lalata eriya |
| Inlay Bonding | Bincika daidaituwar mannewa, juriya na zafi, ɓoyayyiya da lalatawar dogon lokaci |
| Karanta Ayyukan | Gwaji nisa na karantawa, daidaitawa, tsangwama tarin kati da daidaitawar kulle/karanta |
| Da'awar muhalli | Kar a siffanta katin lantarki a matsayin mai cikakken taki sai dai in an tabbatar da cikakken abu |
| Aikace-aikacen | Gwajin Mahimmanci | Mai Mahimmanci |
|---|---|---|
| Katunan Kyauta da Aminci | Buga mai inganci, lambar barcode, igiyar maganadisu ko zaɓin RFID | Daidaituwar bugun bugawa, amfani da walat, lankwasawa da rayuwar shirin da ake tsammani |
| Katunan Maɓalli na otal | Katunan RFID masu amfani da gajeriyar amfani tare da alamun zane-zane da daidaita tsarin kulle-kulle | Daidaita guntu, shigar da bayanai, aikin mai karatu, zafi da maimaita kulawa |
| Katunan Biki da taron | Samun shiga na ɗan gajeren lokaci, alamar alama, naushi ramuka da bayanai masu canzawa | Lanyard load, buga dorewar da taron zubar da hanya |
| Katunan Membobi | Bugawa da keɓaɓɓun katunan don kulake, gyms da shirye-shiryen dillalai | Tsammanin rayuwar sabis, abrasion, lankwasawa da jigilar fa'idar kati |
| Kasuwanci da Katunan Talla | Ƙarshen gani mai ƙima, nuna gaskiya, launi na musamman da keɓancewa na gajere | Print mannewa, karce juriya, gefen ingancin da kuma ajiya flatness |
| Katunan Samun damar RFID | Ginin katin mara lamba tare da madaidaicin inlay da lamination mai ƙarancin zafi | Ayyukan lantarki, sassauƙawa, ƙaddamarwa da daidaitawar mai karatu |
Kyauta, Membobi da Katunan Talla
Ƙarshen Shirye-shiryen Katin PLA
| Material | Ƙarfin | Maɓallin Maɓalli |
|---|---|---|
| PLA | Matsakaicin tushen halittu, kebantaccen labarin ɗorewa da yuwuwar yiwuwar takin masana'antu don ingantattun sifofi | Ƙananan juriya na zafi, ƙwarewar tsari, haɗarin ɓarna da ƙayyadaddun kayan aikin tarawa |
| PVC | Kafa tsarin kati mai rahusa, faffadan bugu da ilimin lamination | Tushen burbushin halittu, mai ɗauke da chlorine da iyakanceccen sake amfani da shi a cikin shirye-shiryen katin da yawa |
| PETG | Kyakkyawan lamination, tauri, nuna gaskiya da sanin masana'antar kati | Ba taki ba da zubarwa ya dogara da tsarin sake amfani da gida |
| Polycarbonate | Babban karko, juriya na zafi da dacewa don zanen laser | Maɗaukakin farashi da ɗorewa daban-daban/ bayanin martabar ƙarshen rayuwa |
| PVC / RETG da aka sake yin fa'ida | Yana rage buƙatun budurwa-roba yayin da yake riƙe da sananniyar sarrafa katin | Abubuwan da aka sake yin fa'ida, launi, daidaito da sake amfani da su suna buƙatar shaida |
PLA ba ta atomatik shine mafi kyawun abu don kowane takaddun shaida ba. Otal ɗin gajeriyar rayuwa, baƙo, taron, kyauta da katunan talla na iya zama ƙwaƙƙwaran ƴan takara. ID na gwamnati na tsawon rai, katunan biyan kuɗi, ƙimar zafin jiki da katunan da ke buƙatar zanen Laser na iya buƙatar PETG, polycarbonate ko wani ingantaccen gini.
| Da'awar Maimaita | Madaidaicin Fassarar B2B |
|---|---|
| Tsarin Halitta | Yana nufin abun cikin carbon mai sabuntawa kuma yakamata a goyi bayan takaddun kayan ko gwaji |
| Mai Tarin Masana'antu | Yana buƙatar takaddun shaida don yanayin sarrafa takin aerobic na birni ko masana'antu |
| Takin Gida | Yana buƙatar takardar shedar takin gida daban; takaddun shaida na masana'antu bai isa ba |
| Abun iya lalacewa | Wanda bai cika ba tare da yanayin gwaji, hanya da ƙayyadaddun lokaci |
| Maimaituwa | Mai yuwuwar fasaha a cikin rafin PLA da aka keɓe, amma ba a karɓi katunan ko'ina a cikin daidaitaccen PET ko sake yin amfani da filastik. |
| Cikakken Katin Da'awar | Guntu, eriya, tawada, sutura, manne da igiyar maganadisu dole ne a haɗa su cikin ƙima |
Takaddun takaddar PLA ba za ta iya tallafawa da'awar katin RFID ta atomatik, katin maganadisu ko bugu mai rufi ba. Abubuwan lantarki da na ƙarfe na iya buƙatar cirewa, ƙwararrun sake yin amfani da su ko wata hanyar zubarwa daban.
Yawancin wuraren takin masana'antu ba sa karɓar tsayayyen katunan bioplastic. Kalmomin zubarwa yakamata suyi nuni da ainihin tsarin tattarawa a cikin kasuwar da aka yi niyya maimakon kayan ka'ida.
| Ƙirar | Kati |
|---|---|
| Girma da Kauri | Tsawon, nisa, radius na kusurwa, kauri da haƙuri bayan daidaitawa |
| Warpage da Flatness | Nan da nan kuma tsufa curl a yanayin zafi da zafi mai sarrafawa |
| Adhesion Layer | Kwasfa, delamination baki, zafi tsufa, zafi tsufa da sassauki |
| Lankwasawa da Torsion | Maimaita jujjuyawar, tarkace, samuwar tsagewa da nakasar dindindin |
| Zafi da Kwanciyar Kwanciyar hankali | Adana a cikin wurare masu dumi, fiɗar zafi na firinta da raguwar lamination bayan lamination |
| Darewar Buga | Rub, karce, hulɗar sinadaran, bayyanar UV da mannewa mai rufi |
| Keɓance Kati | Kai tsaye-zuwa-kati, sake canja wuri, canja wuri na thermal, embossing da gwaji na ɓoye kamar yadda ya dace |
| RFID / Ayyukan Magnetic | Karanta/rubutu, daidaitawar kullewa, amincin eriya da rufaffen tsiri bayan samarwa |
| Abun | Ingancin Ingancin |
|---|---|
| Bayanin Kauri | Matsakaicin ma'auni, bambancin aya-zuwa-aya da juriya-zuwa-yawa |
| Girman Sheet | Tsawon tsayi, faɗi, murabba'i, ingancin gefen da yanke haƙuri |
| Flatness da Curl | Sheet baka, gefen dagawa da alkiblar curl bayan sanyaya |
| Launi da Ba'a | L*, a*, b*, fari, bayyanuwa, sheki da ma'aunin da aka yarda da gani |
| ingancin saman | Roughness, matakin jiyya, scratches, black spots, gels, gurbatawa da kariya-fim ingancin |
| Kayayyakin Injini | Tensile, elongation, taurin kai, tasiri da gaggawa bisa ga hanyoyin da aka yarda da su |
| Gwajin Lamination | Haɗawa, raguwa, hazo, toshewa, buga kwanciyar hankali da sakin faranti |
| Abun iya ganowa | Grade, tsari, extrusion kwanan wata, fuskantarwa, jiyya kwanan wata, dubawa rahoton da takardar shaida tunani |
Takardun PLA na iya zama mai kula da zafi, zafi da dogon ajiya. Ma'aji mara kyau na iya canza laushi, jiyya a saman, iya bugawa da halayen lamination. Ya kamata a amince da buƙatun ajiya don ainihin sa da hanyar tattarawa.
Ajiye zanen gadon da aka rufe a cikin sanyi, bushe da tsabtataccen sito nesa da hasken rana kai tsaye da dumama.
Rike zanen gado a kan pallets masu goyan baya kuma ka guje wa matsananciyar matsa lamba.
Kare saman daga ƙura, mai, zanen yatsa, karce da danshi.
Kayan yanayi a cikin bugu ko ɗakin lamination kafin sarrafawa.
Yi amfani da nannade-shamakin danshi, kariyar kusurwa da ƙarfafan kwali na fitarwa.
Aiwatar da farko-in, na farko-fita kaya da kuma sake duba saman jiyya bayan dogon ajiya.
Mayar da hankali kan masana'antu na kati: kauri na takarda, saman, bugu da tsarin Layer ana iya sake duba su a kusa da ainihin buƙatun samar da katin.
Ma'auni na al'ada da girma: Za'a iya tattauna daidaitattun zaɓuɓɓukan 0.08-0.35mm da ƙirar takarda na musamman.
Gwajin bugawa da lamination: Ana iya ƙididdige samfuran don kashewa, UV inkjet, allo, bugu na dijital da ƙarancin zafin jiki.
Taimakon aikin RFID: Za'a iya sake duba tsarin takaddar tare da kauri, matsayi na guntu, eriya da daidaitawar mai karatu.
Da'awar muhalli mai alhakin: Takaddun kayan aiki za a iya daidaita su da ainihin kammala-kati da kasuwa.
Samar da masana'anta kai tsaye B2B: Ya dace da masu kera katin, masu canzawa, masu bugawa, kamfanonin RFID, masu shigo da kaya da masu rarrabawa.
Aikace-aikacen katin da aka gama, rayuwar sabis da ake tsammani da kasuwar makoma.
Layer PLA da ake buƙata: ainihin bugu, cibiya ta tsakiya, madaidaicin Layer ko mai rufi.
Kauri, haƙuri, girman takardar, hatsi/daidaitacce da yawa.
Fari, m, baƙar fata ko launi na al'ada da maƙasudin rashin fahimta.
Kashewa, UV inkjet, allo, Indigo ko sauran tsarin bugu da tsarin tawada.
Lamination Machine, halin yanzu abu, zazzabi profile, matsa lamba da kuma irin farantin.
Girman katin da aka gama, kauri da buƙatun ISO ko ƙayyadaddun abokin ciniki.
guntu na RFID, eriya, kauri na inlay, igiyar maganadisu ko buƙatun guntun lamba.
Ƙarfafawa, abun ciki na tushen halittu, REACH, RoHS ko wasu buƙatun takaddun.
Samfurin yawa, hasashen shekara-shekara, tashar tashar jirgin ruwa da jadawalin isar da aka nema.
Tattauna Aikin Kayan Katinku na PLA
Ba lallai ba ne. Ƙirƙirar katin yana buƙatar kulawa mai laushi, rashin ƙarfi, launi, mannewa bugawa, juriyar kauri da halayyar lamination. Nemi maki da aka gwada don samar da katin.
Samfuran daidaitattun kauri sun haɗa da 0.08, 0.15, 0.17, 0.20 da 0.35mm. Ana iya sake nazarin ma'auni na musamman bisa ga extrusion takarda, tsarin Layer da MOQ.
Ee. Matsakaicin girman takarda shine 300 × 480mm, kuma ana iya tattauna tsarin da aka keɓance bisa ga shimfidar latsawa, shigar da katin da kayan lamination.
Ana iya kimanta takaddun PLA don katunan ID-1, amma katin 85.60 × 53.98mm da aka gama da kauri na 0.76mm dole ne a cimma su bayan bugu, lamination, sanyaya da naushi.
Ana iya kimanta bugu na kashewa tare da dacewa da jiyya da tawada. Masu saye yakamata su gwada manne tawada, bushewa, toshewa, yawan launi da juriya ga sake zagayowar lamination.
Makin da ya dace da magani ko mai rufi na iya dacewa da juna. Dole ne a gwada makamashin saman ƙasa, maganin tawada, sassauci, ƙamshi da haɗin gwiwa mai rufi akan firinta da aka nufa.
Ana iya amfani da kayan aiki, amma girke-girke na PVC na al'ada bai kamata a ɗauka ba. PLA gabaɗaya yana buƙatar ƙarami kuma a hankali sarrafa zagayowar zafi tare da ingantaccen matsi, zama da sanyaya.
Dalilai na gama gari sun haɗa da zafin jiki da ya wuce kima, yadudduka marasa daidaituwa, rashin daidaituwar takardar, ɗaukar hoto mara daidaituwa, rashin sanyaya da auna katin kafin ya cika sharadi.
Ee, ƙarƙashin gwaji. Kaurin inlay, ƙirar eriya, manne, wurin guntu, matsa lamba da dacewa da mai karatu dole ne a haɗa su cikin tsarin katin.
Ana iya la'akari da PLA don katunan maɓalli na otal na gajeriyar amfani lokacin da guntu, tsarin kullewa, bugu, bayyanar zafi da maimaita kulawa an inganta su kafin samarwa.
Aiki ya dogara da daraja da gini. PLA na iya dacewa da zaɓaɓɓen katunan gajere da matsakaici, amma bai kamata a ɗauka ya dace da PVC, PETG ko PC a cikin juriya na zafi, tasiri ko juriyar dogon lokaci ba.
Madaidaicin takardar katin PLA baya dace ta atomatik don amintaccen zanen Laser. Ƙididdigar Laser-alama, bambanci, amsawar zafi da dorewar katin suna buƙatar haɓakawa da gwaji.
Wannan da'awar ya dogara da ingantaccen muhalli da cikakken gini. Takaddun PLA a fili na iya zama mai takin masana'antu, yayin da tawada, adhesives, guntu, eriya, ratsi ko sutura na iya canza matsayin ƙaƙƙarfan katin.
Sai kawai lokacin da ainihin ƙaƙƙarfan katin yana da takardar shedar takin gida daban. Takaddun shaida na masana'antu-takin baya goyan bayan da'awar takin gida ta atomatik.
PLA da PET polymers daban-daban ne kuma bai kamata a gauraya su ba. Sake amfani da PLA yana buƙatar keɓaɓɓen rafi na tarin, wanda ba a ko'ina don katunan.
Fari, bayyananne, baki, translucent da al'ada launuka za a iya tattauna. Masterbatch mai launi na iya rinjayar bugu, lamination, aikin injina da iyakar takaddun shaida.
Ajiye a rufe, lebur da bushe a cikin sito mai sarrafawa nesa da hasken rana da zafi. Kare saman daga ƙura, mai, karce da danshi, da zanen gado kafin bugawa.
Ee. Ya kamata a buga zanen gadon samfuri, lanƙwara, sanyaya, naushi da keɓancewa ta amfani da tsarin samarwa da aka yi niyya kafin a amince da ƙayyadaddun kayan.
MOQ ya dogara da kauri, girman takardar, launi, jiyya na ƙasa, shafi, tattarawa da kuma ko aikin yana amfani da tsarin ƙirar katin da ake da shi.
Samar da aikace-aikacen katin, nau'in Layer, kauri, girman, launi, hanyar bugu, tsarin lamination, RFID ko buƙatun tsiri, takaddun shaida, yawa da makoma.
Tuntuɓi WALLIS Plastic don ainihin zanen katin PLA na al'ada, zanen gadon bugawa da kayan Layer-kati don kyauta, aminci, maɓallin otal, taron, tallatawa da zaɓaɓɓun shirye-shiryen katin RFID. Ƙungiyarmu tana goyan bayan zaɓin ma'auni, bugu da gwaje-gwajen lamination, nazarin tsarin katin, takaddun muhalli, ƙayyadaddun ƙayyadaddun inganci da samar da masana'anta kai tsaye B2B.
