Kiʻekiʻe 15: Ke alakaʻi holoʻokoʻa i ke kūʻai nui ʻana i nā uhi polycarbonate kiʻekiʻe

ʻO ka polycarbonate overlays kahi mea pōhaku kihi i ka hana hou - hāʻawi ʻia i ke kūpaʻa kūʻokoʻa, ka mālamalama, a me ka pale ʻana i ka ʻaʻahu a me ka waimaka. Mai nā kāleka ID paʻa a hiki i nā panela kūkulu hale a me nā mea uila i loko o ka mold (IME) , nā kiʻiʻoniʻoni polycarbonate a me nā overlays he kuleana koʻikoʻi i ka pale ʻana, hoʻonani a hoʻonui i ke ola o nā huahana.

He aha ka Polycarbonate Overlay?

Hoʻohui a me nā waiwai kumu

ʻO ka Polycarbonate (PC) kahi thermoplastic ʻenehana amorphous i ʻike ʻia no:

• ʻO ke kūpaʻa hopena kiʻekiʻe - a hiki i ka 250 manawa ʻoi aku ka ikaika ma mua o ke aniani.

• ʻO ka māmā māmā - ka hoʻouna māmā maikaʻi loa no nā uhi pale a me nā hōʻike.

• ʻO ka hoʻomanawanui wela - nā wela lawelawe mau a hiki i ~140°C.

• ʻO ke kūpaʻa dimensional - pale i ka warping ma lalo o ka wela a me ke kaomi.

ʻO ka polycarbonate overlays he ʻāpana lahilahi a i ʻole nā ​​​​kiʻiʻoniʻoni o PC i hoʻohana ʻia e like me nā papa pale o ka ʻili a i ʻole ma ke ʻano he mau papa hoʻohui i nā huahana laminated , ʻoi aku hoʻi i nā kāleka ID paʻa a me nā kiʻi ʻenehana..

Nā ʻano like ʻole a me nā hana kūkulu

• Nā kiʻiʻoniʻoni monolithic : ʻO nā kiʻiʻoniʻoni ʻoniʻoni ʻoniʻoni a i ʻole nā ​​​​kiʻi ʻoniʻoni.

• ʻO nā uhi i uhi ʻia : ʻO nā ʻili paʻakikī a i ʻole nā ​​​​ʻili aniani no ka pale ʻana/UV.

• ʻO nā kiʻiʻoniʻoni metallized : nā kiʻiʻoniʻoni PC me kahi papa hoʻonaninani a i ʻole hana.

• Ka uhi ʻana i ka pae palekana : Nā kiʻiʻoniʻoni multi-layer me nā hiʻohiʻona i hoʻopili ʻia e like me nā holograms.

Nā ʻano o ka Polycarbonate Overlay

1. Hoʻomaʻemaʻe i nā uhi pale

Mālama kēia mau kiʻi ʻoniʻoni alohilohi i nā ʻili i paʻi ʻia mai nā ʻōpala, nā pōʻino o UV, a me ka hoʻolaha kemika. Mea maʻamau i:

• Kāleka ID

• hōʻailona

• Hōʻike uila

ʻO nā huaʻōlelo i hoʻopaʻa ʻia: polycarbonate overlay, polycarbonate overlays, polycarbonate pale kiʻiʻoniʻoni.

2. Palekana & ID Kāleka Overlays

Hoʻohana ʻia i ka hana ʻana i nā kāleka multi-layer:

• Nā ʻili e hiki ke hoʻomaopopo ʻia i ka laser

• Nā hiʻohiʻona ʻike ʻia

• Hoʻopili ʻia ʻo Fusion i nā core kāleka no ka mau loa

Nā huaʻōlelo i manaʻo ʻia: pc card film, pc lamination.

3. Nā Kūlana Kūikawā (Pepa Polycarbonate)

ʻO Polycarbonate 'pepa' he kiʻiʻoniʻoni PC hiki ke paʻi ʻia i hoʻohana ʻia i nā palapala palekana kūikawā a me nā hoʻohana ʻoihana niche.

Hua'ōlelo pahuhopu: pepa polycarbonate.

Nā noi nui

Palekana ID & Palapala Palapala

Hoʻokumu ʻia nā uhi polycarbonate i ka papa pale o waho i nā ID a me nā palapala palapala i hoʻopuka ʻia e ke aupuni.

Nā pōmaikaʻi:

• ʻO ke kūpaʻa hoʻoheheʻe kiʻekiʻe ke fusion-laminated.

• Hoʻolike like me ke kalai ʻana i ka laser.

• ʻO ke ola lōʻihi (10+ mau makahiki me ka ʻole o ka ʻili).

Nā huaʻōlelo i hoʻohana ʻia: pc lamination, pc card film, polycarbonate overlay.

Hana Hana a me ka Mana Pono

Kū'ē i ka hopena

ʻOi aku ka maikaʻi o ka polycarbonate overlays i ka PVC a me ka PETG i ka pale ʻana i ka hopena - koʻikoʻi no nā uhi pale a me nā palapala palekana.

Paʻa wela

Mālama i ke ʻano a me ka mālamalama i nā wahi wela wela (kaʻa, waho).

Hoʻāʻo ʻAbrasion

Hiki i nā kiʻi ʻoniʻoni PC paʻakikī ke kū i nā tausani o nā pōʻai abrasion Taber me ka ʻike ʻole ʻia.

Ho'āʻo palekana

No nā noi ID:

• Pono nā hoʻāʻo ʻana e hōʻike i ka pōʻino i ʻike ʻia.

• Pono nā paʻa Fusion e pale i ka delamination.

Hoʻolālā a me nā kuhikuhi kikoʻī

Koho mānoanoa

• 30–250 μm no ka uhi ʻana

Hoʻopau ʻili

• ʻAlohilohi no ka akaka

• Matte/anti-glare no nā hōʻike a me ka heluhelu ʻana i waho.

Paʻi Paʻi

• Hiki ke paʻi pale, offset, a me ka paʻi kikohoʻe me nā ʻōnaehana inika pololei.

• No IME: e hōʻoia i ka hoʻokō ʻana me nā inika conductive.

Pono & Hoʻohālikelike

Polycarbonate vs PVC

• Pono : ʻoi aku ka ikaika o ka hopena, ʻoi aku ka maikaʻi o ka wela, ʻoi aku ka paʻa o ka lamination.

• Cons : ʻO ke kumukūʻai kiʻekiʻe, koi i nā mahana hana kiʻekiʻe.

ʻO ka Polycarbonate vs PETG

• Pono : ʻoi aku ka ikaika, ʻoi aku ka pale wela.

• Cons : ʻAʻole hiki ke hana, ʻoi aku ka paʻakikī o ka hana.

Hoʻopau & Kāhea i ka hana

ʻO ka polycarbonate overlays kahi hopena maʻalahi no nā ʻoihana e koi ana i ka lōʻihi, palekana, a me ka mālamalama. Inā makemake ʻoe i nā kiʻiʻoniʻoni pale no nā kāleka ID , i hoʻopau ʻia no ka uila , a i ʻole nā ​​​​laminates PC kūikawā no ka hōʻailona , ​​hāʻawi ka polycarbonate i ka hui pū ʻana o ka ikaika, ka hiki ke hana, a me ka lōʻihi i like ʻole e ka hapa nui o nā plastics.

Ke ʻimi nei i kahi mea hoʻolako hilinaʻi?

Ma Shanghai Wallis Technology Co., Ltd. , ʻike mākou i nā uhi polycarbonate kiʻekiʻe, nā kiʻi ʻoniʻoni PC lamination, a me nā huahana PC i uhi ʻia..

E hoʻokaʻaʻike mai iā mākou i kēia lā no ke noi ʻana i nā laʻana manuahi, nā ʻikepili ʻenehana, a i ʻole kahi ʻōlelo maʻamau i kūpono i kāu noi.