|
Akrilik Sheet we gɛt layt
Wallis we nem Wallis
| Kɔlɔ: | |
|---|---|
| Sayz: | |
| Matirial: | |
| Kwantiti: | |
Wallis de saplae grɛn glɔ insay di dak akrilik shit fɔ sayn, wayfinding displei, intɛriɔ dɛkɔreshɔn, ɛgzibishin prodak, rital fiks ɛn kɔstɔmayz luminous prodak. Dɛn mek am wit vajin PMMA wit fotoluminescent matirial, di sheet de absɔb ɛnaji frɔm natura ɔ atifishal layt ɛn smɔl smɔl i de rilis grɛn layt we pɔsin kin si afta di envayrɔmɛnt we de rawnd dɔn dak.
Dɛn kin kɔl dis matirial bak fotoluminescent acrylic sheet, luminous acrylic sheet ɔ phosphorescent acrylic sheet , dis matirial nɔ nid ilɛktrik pawa sɔs we dɛn kin kɔnɛkt ɔltɛm fɔ mek i gɛt afta-glɔ. I braytnɛs we pɔsin kin si ɛn di tɛm we i de shayn dipen pan di layt we i de chaj, di tɛm we i de ɛksplɔz, distans frɔm di layt sɔs ɛn di daknɛs we de rawnd am.
Wallis lists 3mm–10mm thicknesses , tri standad shit fɔmat, kɔstɔm saiz ɛn sɛkɔndari prɔsesin inklud CNC routing, laser cutting, drilling ɛn engraving fɔ distribyushɔn, sayn manifakta, displei kɔmni, intɛriɔ kɔntrakta ɛn OEM bayer.
Di fכlכw spεsifikεshכn dεm de sכmariz di men Wallis grεn fotoluminesεnt akrilik shit rεnj. Fɔ aplikeshɔn usay dɛn nid fɔ gɛt minim braytnɛs, glɔ durayshɔn ɔ rigyuletɔri pefɔmɛns, dɛn fɔ dɔn di prɔjek-spɛsifi k tɛst ɛn spɛsifikɛshɔn kɔnfɔmeshɔn bifo bɔku bɔku prodakshɔn.
| Paramita | Spɛsifikeshɔn |
|---|---|
| Sɔntin | Grin Glow in di Dak / Fɔtoluminescent Akrilik Shit |
| Tin dɛn | 100% Virgin PMMA wit Fɔtoluminesɛnt Matirial |
| Standart Tiknɛs we de na di wɔl | 3mm na di 3mm |
| Tiknɛs Rɛnj | 3mm–10mm na di wan |
| Standart Sayz dɛn | 1000 × 2000mm, 1220 × 1830mm, 1220 × 2440mm |
| Kastom Sayz | I de akɔdin to wetin di prɔjek nid |
| Daylayt Kɔlɔ | Grin |
| Aftaglɔ Kɔlɔ | Brayt Grin |
| Sho | Smɔl Ay-Glɔs Sɔfays |
| Tik | Na lɛk 1.2g/cm³ |
| Di Tɛm we Dɛn De Chaj Di List | lεk 20–30 minit כnda fayn fayn strכng layt kכndishכn dεm |
| Listed Glow Duration fɔ di tɛm we dɛn de shayn | lεk 2–8 awa dipכnt pan di chaj kכndishכn εn we yu nid fכ si braytnεs |
| Di we aw dɛn de du di wok | Kɔt, CNC routin, laser kɔt, drɔlin ɛn engraving |
| Fim we de protɛkt pɔsin | PE protɛktiv film |
| Tipik Aplikeshɔn dɛn | Sayn, dɛkɔretiv panɛl, wayfinding kɔnsɛpt, displei, ɛgzibishin ɛn luminous prodak |
| MOQ we gɛt fɔ du wit am | Negotiable akɔdin to spesifikeshɔn ɛn prɔjek |
| OEM / ODM we yu de yuz | Dɛn sɔpɔt am |
Fɔtoluminescent akrilik shit na PMMA panɛl we gɛt tin dɛn we de shayn we de absɔb ɛnaji frɔm layt ɛn rilis pat pan da ɛnaji we dɛn dɔn kip afta dɛn dɔn pul di layt sɔs. Di afta-glɔ we kin kɔmɔt de, yu kin si am na say dɛn we dak pasmak.
Dɛn kin kɔl di prɔses as chaj ɛn aftaglɔ. We dɛn de chaj di sheet, dɛn kin put am na di san layt, fluorescent lamp, LED ɔ ɔda fayn layt sɔs. We di envayrɔmɛnt dak, di ɛnaji we dɛn dɔn kip de kɔmɔt smɔl smɔl ɛn di glɔ we wi kin si kin wik as tɛm de go.
di fכtoluminesεnt mεtirial insay di akrilik de abzכp εnεji we di shit de εkspos to wan fayn nεchכral כ atifishal layt sכs.
Di tin we de shayn kin kip pat pan di ɛnaji we i dɔn tek fɔ sɔm tɛm pas fɔ fri ɔl am wantɛm wantɛm.
We di layt we de rawnd am fɔdɔm, di ɛnaji we dɛn dɔn kip de kɔmɔt smɔl smɔl as grɛn layt we pɔsin kin si. Di braytnɛs we dɛn kin si pas ɔl kin apin jɔs afta dɛn dɔn pul di men layt sɔs ɛn afta dat i kin go dɔŋ smɔl smɔl.
Afta di aftaglɔ we yu kin si dɔn dɔn, we yu put am na fayn layt sɔs, i kin chaj di fotoluminescent matirial bak fɔ di nɛks dak saykl.
Wan kot glɔ durayshɔn nɔ fɔ intaprit as kɔnstant ful braytnɛs fɔ di ɔl tɛm. Fɔtoluminescent matirial dɛn kin lɔs di intensiti we dɛn kin si smɔl smɔl afta dɛn dɔn stɔp fɔ chaj.
| Factor | Effect pan di Pɔfɔmɛnshɔn |
|---|---|
| Chaj Layt Intɛnsity | Strɔng fayn layt jɔs de prodyuz strɔng initial aftaglɔ pas wik layt. |
| Taym fɔ Chaj | If yu nɔ put di layt fayn, dat kin mek di brayt we de afta dɛn dɔn pul di layt nɔ bɔku. |
| Distans frɔm di say we di Layt de | Di amount of layt we de rich di surface de afekt di chaj efyushɔn. |
| Tayp fɔ di Layt Sɔs | Difrɛn lamp ɛn LED dɛn kin chaj fotoluminescent matirial dɛn pan difrɛn rit. |
| Ambient Daknɛs we de na di say we dɛn de | Di glɔ de sho mɔ na say dɛn we dak pas say dɛn we gɛt bɔku bakgrɔn layt. |
| Di Taym fɔ Si | di aftaglɔ intɛnsity kin strɔng pas ɔl fɔs ɛn smɔl smɔl i kin go dɔŋ wit tɛm. |
| Di Spɛsifikeshɔn fɔ di Matirial | Luminous pigment konsantreshכn, sheet tiknes εn prodakt fכmyuleshכn kin infכlכw faynal pεrformεns. |
We dɛn dɔn chaj am fayn fayn wan, fotoluminescent akrilik kin mek aftaglɔ we pɔsin kin si we nɔ gɛt LED ɔ ilɛktrik kɔnɛkshɔn we de kɔntinyu fɔ pawa. Dis de mek i yusful fɔ dɛkɔretiv prɔdak ɛn sɔm visibiliti aplikeshɔn dɛn.
Di tin we dɛn de yuz kin chenj frɔm di we aw i tan lɛk de layt to wan grɔn we pɔsin kin si we i dak, we kin mek di wan dɛn we de mek dizayn ebul fɔ mek prɔdak dɛn we de sho difrɛn tin dɛn we pɔsin kin si ɔnda layt ɛn dak kɔndishɔn.
Wallis spɛsifa vajin PMMA fɔ dis prodak rɛnj, we de gi wan smol akrilik bays we fit fɔ kɔmɛshɔnal fabrikeshɔn ɛn kɔstɔmayz shit prodakshɔn.
Di standad prodak de posishun arawnd 3mm sheet, we 4mm, 5mm, 6mm, 8mm ɛn 10mm rikwaymɛnt dɛn kin tɔk bɔt akɔdin to di finish prodak ɛn ɔda spɛsifikɛshɔn.
Di sheet kin chenj to sayn, lɛta, panɛl, logo ɛn dɛkɔretiv kɔmpɔnɛnt dɛn tru di rayt akrilik kɔt, routin, drɔlin ɛn engravin prɔses.
Dɛn kin tɔk bɔt di kɔstɔm saiz, prɔsesin ɛn ɔda tin dɛn we dɛn nid fɔ du fɔ di wan dɛn we de mek sayn, di wan dɛn we de mek, di wan dɛn we de sheb di tin dɛn, di wan dɛn we de mek intɛriɔ ɛn di wan dɛn we de mek kɔmɛshɔnal prɔdak.
Glɔ akrilik kin mek am to aro, dairekshɔn mak, rum aydentifaya ɛn visibiliti panɛl we de kɔntinyu fɔ notis fɔ sɔm tɛm afta dɛn dɔn pul di nɔmal layt.
Fɔ di imejensi ɛkzit ɔ ɛgrɛs sistem dɛn we di lɔ se, di wan dɛn we de bay fɔ kɔnfɔm if di ɛksaktɔl matirial spɛsifikɛshɔn gɛt di sɛtifiket dɛn, di luminans pefɔmɛns ɛn di aprɔval dɛn we di aplikebul lokal bildin ɔ faya kɔd nid.
Ritayl brand, ɛnjɔymɛnt venyu ɛn ɛgzibishin disayna dɛn kin yuz akrilik we de shayn fɔ logo, lɛta ɛn sayn dɛn we kin gɛt ɔda vijual ifɛkt afta dɛn dɔn ridyus di layt dɛn we de rawnd.
Fɔtoluminescent PMMA kin inkɔrpɔret insay ficha wɔl, patishɔn, dɛkɔretiv insɛt ɛn kriyaytiv panɛl fɔ ɔtel, ba, ɛnjɔymɛnt spɛs ɛn tim intɛriɔ.
Glow akrilik kin ad wan intaraktiv layt-to-dak ifɛkt to ɛgzibishin grafik, displei strɔkchɔ, prodak lanch ɛn tɛmporari ivin instɔleshɔn.
Lɛta dɛn we dɛn kɔt wit lɛsa, shep dɛn we dɛn kin yuz fɔ dekɔret, displei dɛn, nyu prɔdak dɛn ɛn kɔstɔm akrilik aksesɔri dɛn kin yuz di layt ifɛkt as pat pan di prɔdak dizayn.
Di matirial kin intagret insay sɔm sɛlɛkɛt dɛkɔretiv laytin kɔnsɛpt usay di dizayn we yu want inklud ɔl tu di layt ɛn aftaglɔ faz dɛn. Nɔ fɔ trit am lɛk fɔ tek ples fɔ layt sɔs we gɛt ilɛktrik pawa we dɛn nid fɔ kɔntinyu fɔ layt.
Dɛn wɔd ya de tɔk bɔt difrɛn layt ifɛkt dɛn ɛn dɛn nɔ fɔ trit dɛn lɛk se dɛn kin chenj we dɛn de spɛsifa wan prɔjek.
| Tayp | Aw I Apia | Pawa Rikwaymɛnt |
|---|---|---|
| Fotoluminescent Akrilik we dɛn kɔl | I de absɔb layt ɛn mek wan aftaglɔ we de fade afta dɛn dɔn pul di layt we de chaj | No kɔntinyu ilɛktrik pawa nɔ nid fɔ afta-glɔ |
| Fluorescent Akrilik we dɛn kɔl | I kin tan lɛk brayt ɔ klia mɔ we yu de shayn wit fayn layt | Rikways insidɛnt layt fɔ mek di fluorescent apinans kɔntinyu fɔ de |
| LED akrilik displei | Yuz LED ɔ ɔda pawaful sɔs fɔ mek kɔntinyu layt | I nid ilɛktrik pawa we i gɛt layt |
Wan sampul we dɛn mek fɔ wan rital ɛnvayrɔmɛnt we gɛt LED layt fɔ tɛst wit layt we fiba di las prɔjek pas fɔ tek am se di san layt ɛn indo LED chaj de prodyuz di sem rizɔlt.
Rikɔd di chaj distans ɛn di tɛm we dɛn de ɛksplɔz so dat dɛn go kɔmpia difrɛn sampul dɛn ɔnda kɔndishɔn dɛn we dɛn kin ripit.
Fɔ prɔjek dɛm usay aftaglɔ impɔtant, kɔmpia di apinɛns wantɛm afta yu chaj ɛn bak afta difayn intaval pas fɔ jɔj di pefɔmɛns ɔl na di brayt initial mɔnt.
Fɔ ripit OEM ɔda, kip wan aprɔv matirial sampul togɛda wit tiknɛs, chaj kɔndishɔn ɛn ɛni gri fɔ glɔ-pɔfɔmɛnshɔn krayteria.
| Prosesin | Projek Konsidareshɔn dɛn |
|---|---|
| Kɔt-to-Sayz | Kastom lɔng ɛn waid akɔdin to di tin dɛn we di prɔjek nid |
| Laser Kɔt we dɛn de kɔt | I fayn fɔ bɔku sayn dɛn, lɛta dɛn ɛn tin dɛn fɔ dekɔret; di sɛtin dɛn fɔ tɛst akɔdin to di tik |
| CNC Routing we dɛn de yuz | I fayn fɔ profayl, opin ɛn ripit fabricated kɔmpɔnɛnt dɛn |
| Fɔ drɔl | Yu kin spɛsifa di ol saiz ɛn di say we yu de bay we yu yuz drɔin dɛn |
| Fɔ mek tin dɛn we dɛn rayt | Dɛn kin ebul fɔ evalyu logo, simbul, lɛta ɛn dairekshɔn grafik akɔdin to dizayn |
| Edge Finishing we dɛn de du | Projek-based ed finishing rikwaymɛnt dɛn kin tɔk bɔt |
| Bonding we gɛt fɔ du wit dɛnsɛf | Yuz aprɔpriet PMMA-kɔmpatibl bonding mɛtɔd fɔ fabricated asɛmbli |
Di 3mm prodak na prɛktikal statin pɔynt fɔ bɔku flat sayn dɛn, lɛta dɛn, grafik dɛn, smɔl panɛl dɛn ɛn fabricated dɛkɔretiv pat dɛn usay di sheet de sɔpɔt fayn fayn wan.
4mm, 5mm, 6mm, 8mm ɔ 10mm opshɔn dɛn kin fayn we dɛn nid fɔ gɛt mɔ rigiditi, big dimɛnshɔn ɔ wan patikyula we we dɛn mek.
Panɛl lɔng, wit, sɔpɔt pɔynt, ol, instɔleshɔn we ɛn lod ɔl de afɛkt di rigiditi we dɛn nid. Provayd di finished komponɛnt drɔin we strɔkchɔral stiffness impɔtant.
Fɔ fotoluminescent shit prodakshɔn, ɔl tu di akrilik kwaliti ɛn luminous apinans rili impɔtant fɔ ripit kɔmɛshɔnal ɔda. Wallis de diskraib kwaliti kɔntrol we de kɔba raw matirial, luminous matirial distribyushɔn, shit tiknes, sɔfays apinans ɛn protɛktiv-film aplikeshɔn.
Dɛn kin chɛk di raw matirial ɛn di say dɛn we dɛn dɔn dɔn fɔ si if dɛn gɛt prɔblɛm dɛn we pɔsin kin si bifo dɛn pak dɛn ɛn ship dɛn.
Fɔ ripit prɔjek, bayer dɛn kin difayn sampul aprɔval kɔndishɔn so braytnɛs ɛn vijual apinɛns dɛn kɔmpia yuz kɔnsistɛns chaj kɔndishɔn.
Di tik we di shit tik, di flat ɛn di kɔndishɔn na di say we di wata de fɔ bi di rayt fɔ di tin dɛn we dɛn nid fɔ kɔt, engrav ɛn asɛmbli dɔŋstrim.
Indo sayn, displei ɛn dɛkɔretiv prodak na stret target aplikeshɔn fɔ glɔ akrilik. Fɔ yuz na do, di wan dɛn we de bay fɔ gi di UV ɛksplɔshɔn we dɛn de op fɔ, di tɛmpracha rɛnj, di mɔstɔ kɔndishɔn ɛn di savis-layf we dɛn nid so dat dɛn go ebul fɔ evalyu di ɛksaktɔl matirial spɛsifikɛshɔn.
Di autdoor durability of ɔdinari PMMA nɔ de pruv ɔtomɛtik wan se ɛvri fotoluminescent fɔmyulashɔn go mentɛn di sem glɔ pefɔmɛns ɔnda lɔng tɛm ɛkstirian ɛksplɔshɔn. So dɛn fɔ kɔnfyus di prɔjek dɛn we de na do sɛf sɛf.
Fɔtoluminescent matirial dɛn kin gɛt fɔ du wit di prɔdak dɛn we dɛn kin yuz fɔ kɔmɔt, fɔ kɔmɔt ɛn fɔ fɛn we, bɔt sef sayn dɛn we di lɔ se kin nid fɔ gɛt spɛshal luminans tɛst, faya pefɔmɛns, bildin-kɔd aprɔval ɔ tɔd-pati sɛtifiket.
If yu prɔjek na fɔ wan rɛgyulayt imejensi ɛkzit, ɛvakyushɔn rod ɔ layf-sefty sistɛm, gi di standad ɛn makɛt we dɛn nid so dat dɛn go ebul fɔ rivyu di sɛtifikeshɔn rikwaymɛnt dɛn bifo dɛn spɛsifa di matirial.
| Infɔmeshɔn | Wetin fɔ Gi |
|---|---|
| Tik we i tik | 3mm, 4mm, 5mm, 6mm, 8mm, 10mm ɔ spesifikeshɔn we dɛn nid |
| Dimenshɔn dɛn | Ful-shit saiz ɔ finish kɔt dimɛnshɔn |
| Aplay fɔm | Sayn, dɛkɔretiv panɛl, wayfinding, displei, ɛgzibishin ɔ fabricated kɔmpɔnɛnt |
| Glow Rikwaymɛnt | Di kɔndishɔn fɔ chaj we dɛn nid, di tɛm we pɔsin kin si ɔ di krayteria fɔ di layt if i apɔynt |
| Di we aw dɛn de du di wok | Laser cutting, CNC, drilling, engraving ɔ ɔda tin dɛn we dɛn nid |
| Drɔin | Gi drɔin fɔ logo, sayn, kɔt pat ɛn kɔstɔm kɔmpɔnɛnt dɛn |
| Ɔmɔs | Sampul kwantiti, trayal kwantiti ɛn ɛkspɛkt bɔlk volyum |
| Ples | Di kɔndishɔn dɛn fɔ instɔl insay os ɔ na do |
| Di Rikwaymɛnt fɔ Kɔmplians | Spɛsifik ɛni bildin, faya, ɛgrɛs ɔ sefty standad we yu nid bifo yu ɔda |
| Usay yu de go | Kɔntri, pɔt ɔ di say we dɛn de sɛn di tin dɛn |
Send Wallis yu rikwayd tiknes, dimɛnshɔn, chaj kɔndishɔn, aplikeshɔn, kwantiti ɛn fabrikeshɔn drɔin fɔ tɔk bɔt sɛmpul ɛn kɔstɔmayz prodakshɔn.
Send Yu Projek Rikwaymɛnt dɛnProtektiv film de ɛp fɔ ridyus skrach we dɛn de transpɔt ɛn we dɛn de mek am dɔŋ di wata. Dɛn kin tɔk bɔt ɛkspɔt pakej akɔdin to di sheet saiz, ɔda kwantiti, kɔt-to-sayz rikwaymɛnt ɛn di shiping dɛstineshɔn.
Ekspɔt Palet Pakɛj
Lod we de na di kɔntena
Glow in di dak akrilik na PMMA sheet we gɛt fotoluminescent matirial we de absɔb layt ɛn smɔl smɔl i de rilis layt we pɔsin kin si afta dɛn dɔn pul di chaj sɔs.
Nɔ, fotoluminescent akrilik de mek afta-glɔ afta dɛn dɔn pul di layt we dɛn de chaj. Fluorescent acrylic na di men tin we dɛn kin no bay we i de brayt we i de layt wit fayn layt sɔs.
Di afta-glɔ insɛf nɔ nid fɔ kɔntinyu fɔ gɛt ilɛktrik pawa. Bɔt fɔs, di sheet fɔ gɛt fayn natura ɔ atifishal layt sɔs fɔ chaj am.
Naw Wallis de list lɛk 20–30 minit ɔnda fayn strɔng layt kɔndishɔn. Aktual chaj pefomans dipen pan di intensiti, spɛktrum ɛn distans fɔ di layt sɔs.
Wallis list lεk 2–8 awa dipכnt pan di kכndishכn dεm we dεn de chaj. Di glɔ nɔ kin de na ful braytnɛs fɔ di wan ol tɛm; di intensiti we yu kin si kin dכn sכmtεm afta dεn dכn pul di chaj sכs.
Di prodakt rεnj we de naw de list 3mm–10mm, wit 3mm we dεn posishכn as di standad tiknes. Dɛn fɔ kɔnfyus di patikyula avaylabl akɔdin to di saiz, kwantiti ɛn aplikeshɔn.
Wallis list 1000×2000mm, 1220×1830mm ɛn 1220×2440mm, wit kɔstɔmayz saiz dɛn we de bak.
Yɛs. Dɛn kin tɔk bɔt kɔt-to-sayz prodakshɔn akɔdin to di dimɛnshɔn dɛn we dɛn nid, tik, kwantiti ɛn fabrikeshɔn drɔin dɛn.
Laser cutting na wan pan di listed processing methods. Dɛn fɔ tɛst di mashin paramita dɛn akɔdin to di tik we di shit tik, di edj kwaliti we dɛn nid ɛn di jɔyometri we dɛn dɔn dɔn pat.
Yɛs. CNC routing kin yuz fɔ kɔstɔm profayl, opin ɛn ripit kɔmpɔnɛnt dɛn. Gi drɔin dɛn we dimɛnshɔnal akkuracy impɔtant.
Yɛs. Yu kin yuz engraving fɔ lɛta, simbul, logo ɛn dairekshɔn grafik. Di ekzak vijual risal fɔ kɔnfyus wit wan sampul bifo bɔku bɔku prodakshɔn.
Photoluminescent acrylic kin bi fabricated in visibility ɛn wayfinding sayn, bɔt rigyuleted imejensi ɛkzit ɛn egress aplikeshɔn dɛn kin nid spɛshal luminance, faya, bildin-kɔd ɔ tɔd-pati sɛtifiket. Kɔnfɛm di standad we dɛn fɔ yuz bifo yu spɛsifa di matirial fɔ wan layf-sefty aplikeshɔn.
Dɛn fɔ kɔnfyus if i fit fɔ de na do akɔdin to di UV we dɛn de ɛksplɔz, di wɛda kɔndishɔn, di we aw dɛn de instɔl am ɛn di savis layf we dɛn nid. Di ekzak fotoluminescent fɔmyulashɔn fɔ bi evaluate pas fɔ asum ɔl di glɔ akrilik gred dɛn gɛt di sem ɔda durabiliti.
Suitabl natura layt kin chaj fotoluminescent matirial. Di rial afta-glɔ de dipen pan di amount ɛn di kayn layt we de rich di sheet bifo di envayrɔmɛnt dak.
Bɔku LED sɔs dɛn kin chaj fotoluminescent matirial, bɔt di chaj efyushɔn kin difrɛn wit LED spɛktrum, ɔtput, distans ɛn ɛksplɔshɔn tɛm. I fayn fɔ tɛst wit di rial prɔjek laytin.
Nɔ. Fɔtoluminescent aftaglɔ kin strɔng pas ɔl jɔs afta we di chaj dɔn ɛn smɔl smɔl i kin wik. So, di wan dɛn we de bay fɔ difayn di braytnɛs we dɛn nid pan wan patikyula tɛm intaval if di pefɔmɛns impɔtant.
Yuz saf klos we gɛt sop ɛn wata we nɔ gɛt bɛtɛ trɛnk ɔ yuz klin we gɛt akrilik. Nɔ yuz abrasive pad, had brush ɛn agresiv sɔlvɛnt we kin pwɛl di PMMA surface.
Yɛs. Sampul tɛst na patikyula yusful fɔ glɔ prodakt bikɔs chaj layt, ɛksplɔshɔn tɛm ɛn ambiɛnt daknɛs kin rili afɛkt di pefɔmɛns we dɛn tink se.
Gi di tik we dɛn nid, dimɛnshɔn, kwantiti, aplikeshɔn, chaj ɛnvayrɔmɛnt, prɔsesin rikwaymɛnt ɛn di delivri dɛstineshɔn. If di matirial na fɔ rigyuleted sefty sayn, gi bak di sɛtifiket ɔ standad we dɛn nid.
Yu de luk fɔ grɛn glɔ na di dak akrilik sheet fɔ sayn, displei, dɛkɔretiv panɛl ɔ kɔstɔmayz luminous prodak? Send Wallis yu tik, dimɛnshɔn, kwantiti, aplikeshɔn ɛn fabrikeshɔn rikwaymɛnt fɔ tɔk bɔt sɛmpul ɛn faktri sapɔt.
