|
WLS-PVC Kad we dɛn kin yuz
WALLIS
| Tik: | |
|---|---|
| Printin Tayp: | |
| Kwantiti: | |
Wallis de saplae wayt blank PVC kad fɔ wokman ID badge, studɛnt kad, mɛmbaship kad, lɔyalti kad, visitɔ pas, gift kad ɛn ɔda on-dimand kad-printing program dɛn. Standart CR80 kad ɛn kɔstɔmayz saiz ɔ tiknɛs de fɔ distribyushɔn, kad-printin kɔmni ɛn OEM bayer.
Di wan dɛn we de bay kin pik wan kad sɔfays we dɛn mek fɔ kɔmpitabl inkjɛt printin ɔ wan say we dɛn mek fɔ dairekt-to-kad tɛmal transfa, day-sablimɛshɔn ɔ ritransfa kad printa dɛn. Di kɔrɛkt kad fɔ mach wit di printa mɔdel, di fid mɛkanism, aksepted tik, ink ɔ ribin sistem ɛn di print durability we dɛn nid.
PVC, PET ɛn polycarbonate opshɔn dɛn kin tɔk bɔt fɔ difrɛn durabiliti ɛn prodakshɔn rikwaymɛnt. Magnɛtik strɛp, RFID ɔ NFC inlay, kɔntakt chip, sayn panɛl, ol ɛn ɔda kad strɔkchɔ dɛn de as sɛpret kɔnfigyushɔn pas fɔ put dɛn insay ɛvri blank kad.
| Di Prodak Nem | Wait Blank PVC, PET ɔ Polikabɔnɛt Kad | Kɔlɔ | Wayt; dɛn kin tɔk bɔt di kɔlɔ dɛn we dɛn dɔn kɔstɔmayt |
| Standart Sayz | CR80, we de arawnd 85.5–85.6 × 54 mm | Kastom Sayz | Available subject to tul ɛn prodakshɔn rivyu |
| Tiknɛs Opshɔn dɛn | 0.38 mm, 0.76 mm, 0.84 mm ɔ we dɛn kɔstɔmayt | Standart ID Kad Fɔmat | 0.76 mm / 30 mil na wan we dɛn kin yuz bɔku bɔku wan fɔ CR80 ID kad printa dɛn |
| Inkjet we dɛn de print | Speshal ink-riseptiv surface fɔ kɔmpitabl Epson-stayl ɔ ɔda apruv inkjet kad wokflɔ | Kad Printa fɔ Print | Surface fɔ kɔmpitabl Zebra, HID FARGO, Evolis, Magicard, Datacard ɔ ɔda ID kad printa dɛn |
| Sayd dɛn we yu kin print | Singl-sayd ɔ dabl-sayd printabl kɔnstrɔkshɔn akɔdin to di kɔtin we yu dɔn pik | Di Opshɔn dɛn fɔ di Surface | Glossy, mat, frosted, inkjet-coated ɔ printa-spɛsifi k finish |
| Strukchɔ dɛn we yu kin pik | Plɛn kad, magnɛtik strɛp, kɔntakt chip, RFID/NFC inlay ɔ ɔda prɔjek-spɛsifi k strɔkchɔ | Opshɔnal Pɔsnalayzeshɔn | Logo printin, siriɔs nɔmba, QR kɔd, barɔd, sayn panɛl ɛn ol panch |
| Praymari Aplikeshɔn dɛn | ID kad, mɛmbaship kad, visitɔ badge, lɔyalti kad, gift kad ɛn smart-kad program | OEM Savis we dɛn de yuz | Matirial, saiz, tik, kɔtin, kad strɔkchɔ, printin ɛn pak kɔstɔmayshɔn |
Printa kɔmpatibiliti fɔ kɔnfɔm bay di rayt mɔdel. CR80 kad we de wok na tɛmal ID kad printa nɔ go fayn fɔ dɛsktɔp inkjɛt printa, we kad we dɛn kɔt wit inkjɛt nɔ go gi di rizɔlt we dɛn bin want fɔ gi na ɛni kad printa we gɛt ribin.
| Kɔmpiashɔn | Inkjet Printabl PVC Kad | Tɛmal / Day-Sublimeshɔn Kad |
|---|---|---|
| Kad Surface | Ink-receptive coating we dɛn mek fɔ absɔb ɛn ol kɔmpatib ink | Smol surface we dɛn mek fɔ kɔmpitabl ribin, day sublimation, resin ɔ ritransfer film |
| Tipik Ikwipmɛnt dɛn | Inkjet printa ɛn kad trey we dɛn dɔn gri fɔ ɔ wan inkjet kad printa we dɛn dɔn gi am | Zebra, HID FARGO, Evolis, Magicard, Datacard ɛn ɔda ID kad printa dɛn we dɛn dɔn gri fɔ |
| Di tin dɛn we pɔsin kin yuz | Set ink we kɔmpitabl | YMCKO, resin, monokrom ribin ɔ ritransfa film akɔdin to di printa |
| Ki fɔ Bay Chɛk | Printa mɔdel, trey, kad tiknɛs, kɔtin sayd ɛn ink kɔmpitibliti | Printa mɔdel, aksepted matirial, tiknɛs, ribin ɛn ɛnkɔdin opshɔn dɛn |
| Printin we De na Dabl Sayd | I nid fɔ gɛt kad we gɛt dabl-sayd kɔt ɛn fayn wokflɔ fɔ lod | I nid fɔ gɛt tu sayd printa ɔ manual kad rivasal, dipen pan di ikwipmɛnt |
| Risk if Dɛn Yuz di Kɔrɛkt Kad | Pɔr adhesion, slo drying, smearing, fidin prɔblɛm ɔ inkɔmplit kɔvarej | Wik transfa, ribin defekt, kad jam, printhed wear ɔ inkɔnsistɛns kɔlɔ |
Brand nem nɔmɔ nɔ go du bikɔs di wan dɛn we de mek am de gi difrɛn printa tɛknɔlɔji dɛn ɛn di kad spɛsifikɛshɔn dɛn we dɛn gri wit. Gi di kɔmplit mɔdel nɔmba ɛn if di printa de yuz ink, dairekt-to-kad ribin ɔ ritransfa fim.
Bɔku tɛm, standad CR80 kad dɛn kin tik 0.76 mm, bɔt printa dɛn kin sɔpɔt difrɛn tiknɛs rɛnj dɛn. Wan 0.38 mm ɔ 0.84 mm kad fɔ verify agens di printa in fid ɛn ajɔstmɛnt spɛsifikɛshɔn dɛn.
Kad we dɛn mek fɔ print inkjɛt wit tu sayd nid fɔ gɛt fayn kɔtin we pɔsin kin print pan ɔl tu di fes dɛn. Di kɔtin sayd, drying bihayvya ɛn print sikyud fɔ tɛst bifo dɛn bay bɔku bɔku wan.
Print density, drying time, scratch resistance ɛn kala dipen pan di kad surface, konsumabl, printa sɛtin ɛn handel. Apruv wan print sampul yuz di aktual prodakshɔn ikwipmɛnt.
Dɛn kin yuz klin wayt kad fɔ wokman badge, visitɔ kad, studɛnt ID, mɛmbaship kad ɛn ɔda vijual aydentifikeshɔn program dɛn we nɔ nid ilɛktroniks we dɛn put insay.
Inkjet kad dɛn kin yuz wan sɔfayz kɔtin we dɛn mek fɔ mek ink absɔpshɔn ɛn fɔ mek imej we go kɔmpit. Di wan dɛn we de bay fɔ sho di printa, di kayn ink, di kad trey, di sayd dɛn we dɛn kin print ɛn di sɔfayz ifɛkt we dɛn want.
Yu kin ad magnɛtik strɛp fɔ kɔmpitabl ɔtel, mɛmbaship, lɔyalti, atɛndans ɔ lɛgsi swip sistem dɛn. HiCo ɔ LoCo tayp, kɔstɔm, strɛp wit, pozishɔn ɛn trak ɛnkɔdin fɔ kɔnfɔm.
Kad dɛn we nɔ gɛt kɔntakt gɛt chip ɛn ɛntena we dɛn pik akɔdin to di rida frikshɔn, protɔkɔl, mɛmori ɛn sikyɔriti rikwaymɛnt dɛn. RFID ɔ NFC kɔmpatibiliti nɔto di wayt PVC sɔfays nɔmɔ de mek am.
Kɔntakt mɔdyul dɛn kin intagret fɔ apruv smat-kad aplikeshɔn dɛn. Mɔdyul tayp, kaviti pozishɔn, kad tiknes, chip ɔpreshɔn sistɛm ɛn pɔsnalayzeshɔn rikwaymɛnt dɛn fɔ difayn.
PET ɔ polycarbonate matirial dɛn kin tink bɔt we wan prɔjek nid difrɛn durabiliti, envayrɔmɛnt ɔ pɔsnalayzeshɔn prɔfayl. Print ɛn lamination prɔses fɔ pik fɔ di sabstret we yu dɔn pik.
Blank PVC Kad we yu de yuz
Magnɛtik Strip Kad
Kad we gɛt smart chip
Wan yunifom wayt sɔfays de sɔpɔt klia tɛks, foto, logo, barɔd ɛn kɔlɔ grafik we dɛn pe am wit di kɔrɛkt printa ɛn di tin dɛn we pɔsin kin yuz.
Di CR80 fɔmat na lɛk 85.6 × 54 mm, we fiba wan standad pemɛnt kad, ɛn na ID badge printa, walet ɛn kad ɔlda dɛn de yuz am bɔku bɔku wan.
0.38 mm, 0.76 mm, 0.84 mm ɛn kɔstɔm tiknɛs dɛn we de de ɛp fɔ adrɛs difrɛn printa, fleksibiliti ɛn kad-kɔnstrɔkshɔn rikwaymɛnt dɛn.
Yu kin pik kad fɔ wan-sayd ɔ tu-sayd printin akɔdin to di surface coating ɛn intended printa wokflɔ.
Magnɛtik strɛp, RFID ɔ NFC inlay, kɔntakt chip, sayn panɛl, QR kɔd, barɔd ɛn siriɔs nɔmba dɛn kin intagret we di prɔjek nid am.
Di wan dɛn we de sheb ɛn di kɔmni dɛn we de print kad kin tɔk bɔt di tin dɛn we dɛn yuz fɔ mek di kad, di dimɛnshɔn, tik, di kɔtin, di bɔks kwantiti, di lɛbl dɛn ɛn di pak we dɛn fɔ ɛkspɔt.
Kɔmni dɛn kin print nem, foto, wokman nɔmba, dipatmɛnt ɛn barɔd fɔ di wokman dɛn, kɔntrakta ɛn visitɔ aydentifikeshɔn.
Skul ɛn yunivasiti dɛn kin gi studɛnt aydentifikeshɔn, laybri, atɛndans ɔ fasiliti kad akɔdin to wetin dɛn printa ɛn sistɛm nid.
Jim, klab, ritayla ɛn savis biznɛs kin mek kɔstɔmayt kad dɛn wit mɛmba nɔmba, branding, QR kɔd ɛn prɔmoshɔnal infɔmeshɔn.
Wait kad dɛn de gi bays fɔ shɔt-rɔn gift kad, vayrɔs, ivin kad, prɔmoshɔnal kad ɛn kampen matirial.
Smat-kad kɔnstrɔkshɔn kin jɔyn wan wayt say we dɛn kin print wit magnɛtik strɛp, kɔntakt chip ɔ kɔntaktlɛs inlay. Di ilɛktronik teknɔlɔji fɔ mach di rida ɛn di softwe we dɛn want fɔ rid.
Ɔtel dɛn kin ɔda kad dɛn we dɛn kin print wit magnɛtik strɛp dɛn we kɔmpitabl ɔ RFID chip dɛn. Lɔk brand, ɛnkɔda, kad tik ɛn sistem fɔmat fɔ tɛst bifo dɛn ɔda bɔku bɔku wan.
Yuz kad we gɛt ink-rɛseptiv kɔtin we mach di inkjet printa ɛn trey. Kɔnfɛm kad ɔriɛnteshɔn, kɔtin sayd, tiknes, print rizɔlt, ink dɛnsiti ɛn drying tɛm bifo yu print wan ful batch.
Di printa dɛn we de print dairekt to kad kin transfa day ɔ rɛsin frɔm ribin to di kad. Pik wan CR80 PVC kad wit di matirial, tik ɛn finish we di wan we mek di printa gri wit.
Ritransfa printa dɛn fɔs print di pikchɔ pan transfa fim ɛn afta dat dɛn kin aplay di fim na di kad. Dis we ya kin gi kɔvarej ɔva-di-ɛj ɛn i kin fayn fɔ teknɔlɔji-rich ɔ nɔ ivin kad sɔfays we di printa sɔpɔt am.
Test kala, foto kwaliti, barkod ridabiliti, edj kɔvarej, drying, skrach resistans ɛn kad fidin wit di aktual printa, ink, ribin ɔ film bifo yu rilis di bɔlk kad ɔda.
Dɔst, ɔyl ɛn finga prɛnt kin afɛkt di kwaliti fɔ di pikchɔ ɛn di we aw di printa de wok. Kip kad dɛn insay pak we go protɛkt yu ɛn tek tɛm handle say dɛn we yu kin print.
PVC na tin we dɛn kin yuz bɔku bɔku wan fɔ standad ID, mɛmbaship, lɔyalti ɛn visitɔ kad bikɔs i de sɔpɔt kɔmɔn kad-printin ɛn finish prɔses.
Dɛn kin tink bɔt PET fɔ prɔjek dɛn we nid difrɛn mɛkanikal ɔ envayrɔmɛnt prɔpati dɛn. Di printin kɔtin ɛn di kad-printa kɔmpatibiliti fɔ kɔnfɔm.
Polikabɔnɛt na kɔmɔn fɔ ɛvaluet fɔ ay-durabiliti kredibiliti ɛn spɛshal pɔsnalayzeshɔn. I kin nid difrɛn printin, lamination ɔ laser-personalization ikwipmɛnt pas standad PVC.
Kompoziyt strɔkchɔ dɛn kin impruv dimɛnshɔnal stebiliti insay sɛlɛkɛt ritransfɔ ɔ laminɛshɔn wokflɔ. Kɔnfɛm di kɔmpɔzit rɛsɛshɔn, sɔfa layt ɛn printa rikwaymɛnt bifo yu ɔda.
Dɛn kin pik di kad matirial, kɔlɔ, tik ɛn di say we dɛn kin print akɔdin to di prɔdak spɛsifikɛshɔn ɛn printin teknɔlɔji we dɛn dɔn gri fɔ.
Dipen pan di prɔdak, di kad kin gɛt inkjet-risɛptiv kɔtin, i kin stil klin fɔ mek di kad-printa pɔsnalayz ɔ dɛn kin print am bifo tɛm yuz ɔfset ɔ dijital prodakshɔn.
RFID, NFC ɔ kɔntakt-chip kad dɛn nid fɔ gɛt sɛpret inlay ɔ mɔdyul prɔses. Chip mɔdel, ɛntena, protɔkɔl ɛn ridin pefɔmɛns fɔ gɛt aprɔval fɔ di aplikeshɔn.
Dɛn kin lamin di kad layers ɛn kɔt dɛn to di dimɛnshɔn dɛn we dɛn nid ɛn di ed kwaliti akɔdin to di kɔnstrɔkshɔn we dɛn dɔn gri fɔ.
Inspekshɔn kin inklud di kad dimɛnshɔn, tik, flat, wayt, skrat, dɔst, kɔtin kɔnsistɛns ɛn fidin pefɔmɛns.
Ɔfset Printin we yu de print
Chip ɛn Antena Ɛmbadin
Printa brand, kɔmplit mɔdel nɔmba ɛn printin teknɔlɔji
Kad matirial: PVC, PET, polycarbonate ɔ kɔmpɔzit
Kad saiz, tik ɛn akseptabl tolɛreshɔn
Inkjet kotin, thermal kad-printa surface ɔ ritransfer rikwaymɛnt
Wan say ɔ tu sayd we yu kin print
Glossy, mat, frosted ɔ ɔda finish
Plɛn, magnɛtik strɛp, RFID/NFC ɔ kɔntakt-chip strɔkchɔ
Ɔda kwantiti, sampul rikwaymɛnt ɛn rikɔrin volyum
Boks kwantiti, lɛbl, ɛkspɔt pak ɛn di delivri dɛstineshɔn
Send Yu Printa ɛn Kad Rikwaymɛnt dɛn
Kɔnfɛm se di sampul de fid fayn fayn wan tru di printa we dɛn want fɔ print witout slip, jam, pasmak statik ɔ tiknɛs mistek.
Evaluate sɔlid kɔlɔ, gradient, foto, fayn tɛks, QR kɔd, barɔd ɛn ed kɔvarej yuz di aktual kɔnsumabl ɛn prodakshɔn sɛtin.
Fɔ inkjet kad, chɛk di tɛm we dɛn de drɛy, smɛl ɛn adheshon. Fɔ riban-bɛs kad, inspɛkt transfa yunifɔmiti, rɛsin adheshon ɛn ritransfa-film bonding.
Kad lɔng, wit, tik, kɔna rayus, flat ɛn ed finish fɔ mit di spesifikeshɔn we dɛn gri fɔ ɛn di printa tolɛreshɔn.
Dɔst, skrat, dent, kɔtin dɛfɛkt ɛn kɔntaminɛshɔn kin afɛkt printin. Protektiv pak fɔ mek di sɔfa kwaliti kɔntinyu fɔ de te dɛn yuz am.
We kad dɛn gɛt magnɛtik strɛp, kɔntakt chip ɔ RFID/NFC inlay, tɛst di ficha wit di rida, ɛnkɔda ɛn aplikeshɔn softwe we yu want.
Wallis kin saplae PVC, PET ɛn polycarbonate kad opshɔn dɛn insay standad CR80 ɛn kɔstɔmayz tiknes akɔdin to di prɔjek.
Di wan dɛn we de bay kin tɔk bɔt inkjet-kɔt, tɛmal kad-printa, ritransfa ɔ ɔda say dɛn we dɛn dɔn gri fɔ pas fɔ abop pan wan-sɔfa-fit-ɔl klem.
Prodak kɔnfigyushɔn kin inklud klin kad, magnɛtik strɛp, kɔntakt chip, RFID/NFC inlay ɛn sɔm pɔsnalayzeshɔn ficha dɛn we dɛn dɔn pik.
Printa-spɛsifi k sampul tɛst de ɛp fɔ kɔnfɔm fidin, imej kwaliti, adheshon ɛn kad kɔnstrɔkshɔn bifo prodakshɔn.
Wallis de sɔpɔt distribyushɔn, ɔlsayla, kad-printin biznɛs, sistɛm intagreta ɛn ɔganayzeshɔn dɛn we nid fɔ gɛt blank-kad saplai we de kam bak.
Rikwest Prayz ɔ Tɛst Sampul dɛn
Di kɔmɔn CR80 fɔmat na lɛk 85.6 × 54 mm. di standad 30 mil kad na bכt 0.76 mm tik, pan כl we כda tik dεm de.
Yɛs, we di kad we yu dɔn pik gɛt fayn say fɔ print na ɔl tu di say dɛn ɛn di wok we di printa de du de sɔpɔt fɔ print tu sayd.
Nɔ. Kɔmpatibiliti dipen pan di printa mɔdel, kad trey, aksepted kad tik, ink sistem ɛn kad kɔtin. Test di rayt printa ɛn kad kɔmbayn bifo yu ɔda.
Bɔku tɛm, nɔto pas nɔmɔ dɛn gɛt kɔtin we go gri wit ink. Standart ribin-printa kad kin mek ink nɔ adheshon fayn ɔ i kin mek prɔblɛm wit inkjet wokflɔ.
CR80 kad dɛn we fit kin wok wit kɔmpitabl mɔdel dɛn, bɔt kad matirial, tik, sɔfa ɛn printa teknɔlɔji fɔ mach di patikyula printa spɛsifikɛshɔn.
Wan 0.76 mm / 30 mil kad na kɔmɔn tin fɔ standad ID printa dɛn. Pik 0.38 mm, 0.84 mm ɔ ɔda tiknes nɔmɔ afta yu dɔn chɛk di printa in sɔpɔt rɛnj ɛn di aplikeshɔn rikwaymɛnt.
Yɛs. Spɛsifik HiCo ɔ LoCo, kɔstɔm, strɛp wit, kɔlɔ, pozishɔn ɛn if magnɛtik-trak ɛnkɔdin nid fɔ de.
Yɛs. Gi di chip, frikshɔn, protɔkɔl, rida mɔdel, kad printa ɛn ɛnkɔdin rikwaymɛnt so dat dɛn go kɔnfɔm di kad kɔnstrɔkshɔn.
PVC insɛf nɔ de mek wata pas, bɔt di print we dɔn dɔn fɔ lɔng tɛm de dipen pan di kɔtin, ink ɔ ribin, di kɔring, lamination ɛn ɛksplɔshɔn kɔndishɔn. Dɛn fɔ tɛst spɛshal tin dɛn we dɛn nid fɔ mek di rɛsistɛns.
Dɛn kin yuz dɛn fɔ sɔm tin dɛn we dɛn kin yuz na do, bɔt di san layt, ɔt, mɔstɔ ɛn abrashɔn kin ridyus di layf we dɛn kin print. Tink bɔt UV protɛkshɔn, ɔvalayz ɔ wan tin we go de fɔ lɔng tɛm we nid de.
Yɛs. Yu kin rivyu di kɔstɔm dimɛnshɔn ɛn tik, bɔt tul, minim ɔda kwantiti ɛn printa kɔmpatibiliti kin difrɛn frɔm standad CR80 kad dɛn.
Yɛs. Print sɛmpul dɛn yuz di aktual printa, ink ɔ ribin, sɛtin ɛn artwok fɔ kɔnfɔm fidin, kɔlɔ, drying, adheshon ɛn barkɔd ridabiliti.
Send di printa mɔdel, printin teknɔlɔji, matirial, kad saiz, tik, sayd dɛn we yu kin print, sɔfays, kad strɔkchɔ, kwantiti, pak ɛn dilivri dɛstineshɔn.
