|
wallis
Wallis na ɔkyerɛwee
| Kɔla: | |
|---|---|
| Ne kɛse: | |
| Nea wɔde di dwuma: | |
| Dodow: | |
Custom Compostable CPLA Kafe Kuruwa Nkataso ma Nsã a ɛyɛ hyew
Wallis amanne CPLA kɔfe kuruwa akataso yɛ nea wɔayɛ ama kɔfe a wɔde kɔ, tii, chocolate a ɛyɛ hyew ne afoforo a anonne a ɛyɛ hyew som. Ɛnam sɛ wɔde hot-cup fit a wɔapene so, sip opening a mfaso wɔ so ne OEM kɔla a wɔpaw nti, wɔboa kɔfe nkɔnsɔnkɔnsɔn, foodservice distributors, cup manufacturers, packaging importers ne private-label brands. Ɛsɛ sɛ wosi nea wɔka sɛ ɛyɛ compostability no so dua ma nea wɔawie no pɛpɛɛpɛ.
Wɔ kuruwa a ɛyɛ hyew mu a wɔde di dwuma ho no, wɔtaa paw PLA a wɔde ahwehwɛ ayɛ—a wɔtaa frɛ no CPLA —efisɛ ɛma ɔhyew a ɛko tia kɛse sen PLA a emu da hɔ a ɛnyɛ nsɛso. Mpɛn pii no, wɔde PLA nkataso a ɛyɛ mmerɛw si hɔ ma anonne a ɛyɛ nwini. Enti ɛsɛ sɛ wɔsi nneɛma a wɔde yɛ adwuma, kuruwa-rim ntwemu, lid profile, anonneɛ hyeɛ ne compostability adansedie so dua ma adwuma biara.
Wallis boa gyinapɛn ne OEM lid diameters, fitaa, tuntum, abɔde ne customized kɔla, embossed logos, sip-through designs, retail anaa foodservice packing ne export-ready bulk supply. Ɛsɛ sɛ wɔde adetɔfo no nkuruwa ankasa sɔ nhwɛsode ahorow hwɛ ansa na wɔayɛ no pii efisɛ nkuruwa a wɔfrɛ no nominal capacity nkutoo nkyerɛ sɛ nea wɔde kata so no bɛyɛ pɛ.
| Aguade a Wɔde Yɛ Adwuma | CPLA sip-through nkataso a wɔde yɛ krataa nkuruwa a ɛyɛ hyew; PLA options ma nkuruwa a ɛyɛ nwini a ɛgyina application nhwehwɛmu so |
| Nneɛma a Wobɛpaw | CPLA, PLA a emu da hɔ anaasɛ adwuma pɔtee bi a wɔde yɛ compostable a egyina ɔhyew ne adansedi ahiade so |
| Diameter Range a wɔtaa yɛ | Bɛyɛ 62–90mm ma aduanma nkuruwa a wɔtaa de di dwuma; ɛsɛ sɛ wosi nnwinnade a wɔde di dwuma pɛpɛɛpɛ ne sɛnea ɛfata kuruwa-rim so dua |
| Kɔla a Wobɛpaw | White, tuntum, abɔde, transparent ma awɔw applications a ɛfata ne customized kɔla ahorow a ɛhyɛ MOQ ase |
| Nneɛma a wɔyɛ no sɛnea wɔpɛ | Diameter, lid profile, sip bue, embossing, kɔla, nneɛma a wɔde kyekyere ne carton agyiraehyɛde |
| B2B Nnwuma a Wɔyɛ | Kuruwa-fit nhwɛsode, nnwinnade nhwehwɛmu, adansedi matching, OEM packing, quality nhwehwɛmu ne export supply |
Bisa CPLA Lid Samples ne B2B Quote
CPLA kɔfe kuruwa anoano yɛ anonne anonne a wɔanwene a wɔde polylactic acid a wɔde ahwehwɛ ayɛ, bioplastic a egyina PLA so a wɔayɛ sɛ ɛbɛma ne kɛse agyina pintinn wɔ anonne a ɛyɛ hyew som mu hyew mu. Mpɛn pii no, nea ɛka ho ne locking rim, sip opening ne air vent. Ɛsɛ sɛ wɔde nkataso a wɔawie no ne krataa kuruwa a wɔahyɛ da ayɛ no hyia na wɔpene so sɛ ɛyɛ hyew ankasa wɔ anonne mu.
CPLA ne PLA a ɛda adi pefee a ɛnyɛ nsɛso nyɛ ade koro. Crystallization sesa ɔhyew suban na ɛtaa ma opaque finish. Wobu ade a wɔawie sɛ ɛyɛ nea wɔagye atom sɛ wotumi yɛ compost bere a ne nhyehyɛe pɔtee ne nea wɔayɛ no nhyehyɛe no yɛ nea wɔde adansedi krataa a ɛfa obi foforo ho a ɛfata akata so nkutoo.
Wɔtaa de 'PLA lid' di dwuma sɛ gua so asɛmfua a ɛtrɛw, nanso ɛnyɛ nea ɛho hia sɛ wɔde anonne a ɛyɛ hyew ne nea ɛyɛ nwini akataso di dwuma. Nneɛma a ɛfata a wobɛpaw no ho hia ma dimensional stability, lid retention ne safe beverage service.
| Beae a Wɔpaw | CPLA Hot Cup Lid | Clear PLA Cold Cup Kataso |
|---|---|---|
| Nneɛma a Wɔde Yɛ Adwuma | Crystallized PLA a wɔayɛ sɛnea ɛbɛyɛ a ɛbɛma ɔhyew a ɛko tia no atu mpɔn | Transparent amorphous PLA ma awɔw anaa ɔhyew a anohyeto wom dwumadie |
| Sɛnea Wɔtaa Yɛ | Mpɛn pii no ɛyɛ fitaa, abɔde anaa kɔla ne opaque | Mpɛn pii no, emu da hɔ anaasɛ ɛda adi pefee |
| Nsã a Wɔtaa De Di Dwuma | Kafe, tii, chocolate a ɛyɛ hyew ne anonne afoforo a ɛyɛ hyew a wɔde kɔ baabiara | Kafe a wɔde ice ayɛ, nsu, smoothies ne anonne a ɛyɛ nwini |
| Sɔhwɛ a Ɛho Hia | Hot-fill fit retention, deformation, leakage ne sip-bue adwumayɛ | Cold-cup fit, mpaapaemu a ɛko tia, condensation ne straw-hole adwumayɛ |
| Akoraeɛ | Ma onwini, ɛnyɛ nwunu na twe wo ho fi owia hann ne ɔhyew tẽẽ ho; di akwankyerɛ a ɛfa nneɛma a wɔkora so a ɛfa adesuakuw pɔtee bi ho no akyi | |
Kɔla ahorow a wɔahyɛ da ayɛ ama Foodservice Brands
Sip-Through Hot Kuruwa a Wɔde Kata So
Ebia nneɛma ahorow bɛfata ama anonne a ɛyɛ hyew, anonne a ɛyɛ nwini anaasɛ akwan a wɔfa so kyekyere nneɛma a plastic nnim. Pon no bɔ gyinabea a wɔtaa de si hɔ no mua; ɔhyew ankasa a wɔko tia ne adansedi ahorow gyina nea ɔde ma no grade pɔtee so.
| Lid Material | Typical Beverage Use | Mfaso Titiriw | Nea Ɛsɛ sɛ Ɔdetɔfo no Hwɛ |
|---|---|---|---|
| CPLA (PLA a wɔde ahwehwɛ ayɛ) . | Kɔfe a ɛyɛ hyew a wɔde kɔ baabiara, tii ne anonne afoforo a ɛyɛ hyew | Ɔhyew a ɛgyina pintinn yiye sen PLA a ɛnyɛ nsɛ | Ɔhyew a wɔde hyɛ mu ma, rim fit, aduan a wɔde di nkitaho ho nkrataa ne nneɛma a wɔawie a ɛyɛ compostability |
| PLA a emu da hɔ (PLA a ɛnyɛ nsɛ) . | Kɔfe a ɛyɛ nwini, anonne a wɔde ice ayɛ ne anonne a wɔayɛ no nwini | Sɛnea ɛte pefee ne sɛnea nneɛma no hu | Cold-use rating, mpaapaemu, kuruwa a ɛne ne ho hyia ne mfiridwuma mu composting scope |
| Afifide nhama a wɔayɛ no nwene | Nsã a ɛyɛ hyew anaa ɛyɛ nwini a egyina grade so | Ebia wobetumi anya nneɛma a wɔde si hɔ a plastic nnim | Coating, srade a ɛko tia, leak adwumayɛ, aduan a ɛne ne ho di nkitaho ne ahofadi adansedi |
| PP anaa PS a wɔtaa de di dwuma | Nsã a ɛyɛ hyew bere a wɔapene abasobɔde no so no | Wɔde nnwinnade ne aguadi mu nneɛma a wɔde ma a wɔde asi hɔ | Mpɔtam hɔ nneɛma a wɔsan de di dwuma a wogye tom, ɛfata, ɔhyew a ɛfata ne nkwa nna awiei tebea a ɛnyɛ nea wɔde yɛ compost |
Wɔ brand wuranom fam no, ɛsɛ sɛ paw no fi ase denam anonne no hyew a wɔahyɛ da ayɛ, kuruwa a ɛne ne ho hyia, disposal infrastructure ne adansedi , akyi no, wɔde hwɛbea, bo ne dodow a ɛba fam koraa a wɔkra.
Wallis betumi asusuw kɔla fitaa, ɛda adi na wɔayɛ no sɛnea wɔpɛ ho, a 0.2–2mm forming-material range ma adwuma no mu nhwehwɛmu. Ɛsɛ sɛ wɔpene finished-lid specifications denam molded part drawing, unit weight ne critical wall-thickness profile so sen sɛ wɔde nominal starting sheet gauge nkutoo bedi dwuma.
| Parameter | Nkyerɛkyerɛmu ne Adetɔ Ho Nsɛm |
|---|---|
| Atadeɛ | CPLA a wɔde yɛ kuruwa a ɛyɛ hyew a wɔde kata so; PLA a emu da hɔ ma nwini-kuruwa akataso a ɛfata; resin ne nneɛma a wɔde ka ho pɛpɛɛpɛ a ɛsɛ sɛ wonya adansedi krataa |
| Common Lid Diameter a Ɛyɛ Fɛ | Bɛyɛ 62, 72, 79/80, 85 ne 89/90mm; sɛnea ɛne ne ho hyia no gyina kuruwa-rim geometry so |
| Kuruwa a Wɔde Tumi | Espresso, 6oz, 8oz, 10oz, 12oz, 16oz ne 20oz nhyehyɛe ahorow a ɛhyɛ kuruwa a ɛne no hyia a ɛtoatoa so no ase |
| Lid Profile, Nsɛm a Wɔahyehyɛ | Flat sip lid, raised sip lid, dome profile, no-hole lid anaasɛ customized design a ɛhyɛ tooling ase |
| Ahosuo | Kɔla fitaa, tuntum, abɔde ne nea wɔayɛ no sɛnea wɔpɛ; akwan a ɛda adi pefee no taa fa PLA a ɛyɛ nwini ho |
| Branding a wɔde hyɛ nneɛma mu | Embossed logo, debossed nkrasɛm, recycling anaa compostability agyiraehyɛde ne amanne carton nkyerɛwde |
| Nneɛma a wɔde kyekyere nneɛma | Nkotoku a wɔde nsateaa ayɛ ne nnaka a wɔde kɔ amannɔne; nneɛma a wɔtaa de gu gua so yɛ asinasin 50 wɔ nsateaa biara mu ne asinasin 1,000 wɔ krataa biara mu |
| MOQ | Egyina nkuku a ɛwɔ hɔ dedaw, ne kɛse, kɔla, ahyɛnsode, adansedi, nneɛma a wɔde kyekyere nneɛma ne afe afe nkɔmhyɛ so |
Nkuruwa abien a ounce tumi yɛ pɛ betumi anya soro ntwemu, rolled-rim thicknesses ne bead shapes. Enti akatasoɔ a wɔakyerɛ sɛ '12oz' nko ara no betumi rentumi nkɔbɔ kuruwa bi a ɛfiri ntoatoasoɔ foforɔ mu. Ɛsɛ sɛ B2B adetɔfoɔ de nkuruwa ankasa, rim mfonini anaa susudua a ɛyɛ pɛpɛɛpɛ ma de sɔ nhyiamu hwɛ.
Maximum abɔnten diameter a wɔabobɔw kuruwa rim.
Minimum diameter wɔ rim bead no ase.
Rim thickness, bead sorokɔ ne krataa-fasu adansi.
Kuruwa ovality akyi a wɔayɛ, stacking ne ɔhyew ahyɛ mu ma.
Sɛ́ ebia kuruwa no wɔ afã bi a wotumi hu a ɛka sɛnea anoano no kyerɛ no.
Snap-on installation tumi ne audible engagement.
Ahoɔden a wɔde yi fi hɔ ne akwanhyia mu pop-off a ɛko tia.
Nsã a ɛyɛ hyew a ɛtwetwe bere a wɔadan no anaasɛ wɔde akɔ no.
Deformation bere a wɔahyɛ no ma na wɔakura mu wɔ ɔhyew a wɔde asi wɔn ani so no akyi.
Sip-bue nsuo, vent dwumadie ne user ahotɔ.
Stacking, denest ne automatic lid-dispenser a ɛne ne ho hyia.
Diameters pii ma Kuruwa Dwumadi ahorow
OEM Lid ne Kuruwa a ɛne ne ho hyia
Ansa na wobɛkra diameter foforo anaasɛ wode nkataso foforo bɛba ama kuruwa nhama a wɔde asi hɔ no, pene so sɛ wɔmfa nkataso pɔtee bi SKU nhyia wɔ kuruwa SKU pɔtee bi ho . Kuruwa dodow a ɛwɔ ounces mu no nnɔɔso sɛ ɛbɛma wɔahwɛ sɛ ɛne ne ho hyia anaa.
| Inspection | Sample Test | Pass / Fail Ahwehwɛde a ɛne sɛ wobɛpene so |
|---|---|---|
| Nsusuwii a ɛfata | Sua kuruwa rim diameter, bead nsusuwii ne lid locking channel | Agreeed dimensional tolerance ne ayɔnkofa a enni mũ a wotumi hu biara nni hɔ |
| Nneɛma a wɔde besisi hɔ ne nea woyi fi hɔ | Sua fit force bere a wode ahyɛ mu mpɛn pii na ayi afi hɔ akyi | Specified handling range a akwanhyia mu lid pop-off |
| Ɔsom a ɛyɛ hyew | Hyɛ krataa kuruwa a wɔapene so no ma wɔ ɔsom mu hyew a wɔapene so no mu | Nsusuwii, snap fit anaa sip-opening geometry a ɛyera a wontumi nnye ntom biara nni hɔ |
| Soa ne tilt | Sɔ nkuruwa a wɔahyɛ no ma hwɛ denam ɔkwan a wɔakyerɛw so sɛ wɔbɛdannan ne nea wɔde fa so so | Apene maximum leakage ne retention gyinapɛn ahorow |
| Stacking ne nea wɔde ma | Run lids fa customer no nsateaa ne dispenser nhyehyɛe | Ntetewmu a wogye tom na ɛnyɛ jamming anaasɛ deformation |
| Nkate ne anoano ahobammɔ | Hwɛ hua, anofafa a ɛne ne ho di nkitaho ne splash suban | Nea efii mu bae a wɔpenee so ne gua a wɔde wɔn ani asi so ne ahyɛnsode ahwehwɛde ahorow |
Fa kuruwa lot, lid lot, mfonini ne sɔhwɛ kyerɛwtohɔ a wɔapene so no sie. Ebia 90 mm akataso a wɔfrɛ no renfata kuruwa biara a wɔtɔn sɛ 90 mm efisɛ rim-roll geometry ne tolerances gu ahorow.
Kɔla betumi aboa ma wɔahu nsonsonoe a ɛda anonne akɛse, anonne ahorow, sotɔɔ ho adwene anaa ankorankoro-label ahorow mu. Fitaa ne abɔdeɛ mu nsunsuansoɔ abu so ma CPLA, berɛ a wɔbɛtumi de tuntum anaa amanne kwan so aduru adi dwuma berɛ a wɔda so ara di ahwehwɛdeɛ a ɛfa aduane a wɔde di nkitaho ne compostability ho no ho dwuma.
Wobetumi de embossed branding ahyɛ nkuku no mu a wɔmfa ink nhyɛ nkataso no so tẽẽ. Adetɔfoɔ bɛtumi abisa ahyɛnsodeɛ, cup-series code, 'Caution Hot,' nneɛma a wɔde kyerɛ anaa compostability agyiraeɛhyɛdeɛ a wɔagye atom, sɛ wɔama kwan sɛ wɔbɛka ne ahyɛnsodeɛ no ama adeɛ a wɔawie no pɛpɛɛpɛ a.
| Customization | B2B Ahwehwɛde |
|---|---|
| Kɔla a Wɔayɛ no Amanneɛbɔ | Pantone anaa honam fam kɔla nhwɛsode, pigment pene, aduan-nkitahodi tebea ne compostability nkɛntɛnso |
| Logo a Wɔakyerɛw no | Vector adwini, line trɛw a ɛba fam koraa, embossing bun, orientation ne nkuku ho ka |
| Amanneɛbɔ Sip Bue | Nsã a ɛsen, mframa a ɛkɔ mu, anofafa a wɔde di nkitaho, splash control ne tooling validation |
| Adansedi Agyiraehyɛde | Wobetumi de adi dwuma bere a ade pɔtee no ne tumi krataa tebea ma kwan ma wɔde agyiraehyɛde no adi dwuma nkutoo |
| Private-Label Carton a Wɔde Di Dwuma | Barcode, SKU, kasa, akwankyerɛ a ɛfa sɛnea wɔtow gu, carton nsusuwii ne pallet nhyehyɛe |
Ɛnsɛ sɛ wɔka PLA ne CPLA nneɛma ho asɛm sɛ ɛyera fi awosu mu wɔ tebea biara mu. Ɛsɛ sɛ wɔde asɛm bi te sɛ 'industrially compostable' bata gyinapɛn a wogye tom, adansedi kuw, nneɛma a wɔyɛ no pɛpɛɛpɛ ne aguadidan a wogye tom a wɔde yɛ compost a ɛwɔ hɔ no ho.
Adansedie taa kyerɛ gyinapɛn te sɛ ASTM D6400, EN 13432 anaa ɔmantam ahwehwɛdeɛ a ɛne no sɛ. Mfiridwuma mu composting de ɔhyew, nsuo, oxygen ne bere a wɔde yɛ adwuma a wɔahyɛ so di dwuma. Ebia adansedi krataa a wɔde ma wɔ base resin no nkutoo ho renkata nkataso a wɔawie no so bere a wɔde pigments, additives, labels anaa nneɛma afoforo aka ho akyi.
Ofie compost yɛ adwuma wɔ ɔhyew a ɛba fam na ɛnyɛ nea wɔahyɛ so kɛse mu. Ɛnsɛ sɛ wɔtɔn nea wɔde kata so no sɛ nea wotumi yɛ wɔ fie mu gye sɛ ade a wɔawie no pɛpɛɛpɛ no wɔ adansedi krataa a ɛfata ma gua a wɔde wɔn ani asi so no.
Nneɛma a wɔde kata so a wotumi yɛ nwura no nnya mfiridwuma mu nneɛma a wɔde yɛ compost wɔ mmeae a wɔtow nneɛma gu a ɛnyɛ den anaa mmeae a nwura wɔ hɔ. Ebia PLA nso bɛhwehwɛ sɛ wɔtew wɔn ho fi nsuten a wɔde di dwuma bio a wɔtaa de di dwuma wɔ PET mu no ho. Ɛsɛ sɛ akwankyerɛ a wɔde tow nneɛma gu no di nneɛma a wɔboaboa ano na wɔyɛ ho adwuma a ɛwɔ gua a wɔde kɔ baabi a wɔrekɔ no akyi.
Afifide a Egyina Kataso So a Wɔpaw ma Composting Nhyehyɛe ahorow a Wɔagye Din
Hot-kuruwa adwumayɛ gyina crystallinity, resin grade, pigment, lid design, ɔfasu no mu duru, kuruwa fit ne anonne hyew. Ɛnsɛ sɛ wɔde PLA asɛm a wɔka no nyinaa di dwuma de pene kɔfe a ɛyɛ hyew a wɔde ma so. Ɛsɛ sɛ wɔsɔ CPLA akataso pɔtee no hwɛ wɔ ɔhyew a ɛkorɔn sen biara a wɔde hyɛ mu ne bere a wɔde kura mu a adetɔfo no hwɛ kwan no mu.
Sɔ deformation hwɛ ntɛm ara bere a wɔde akataso no ahyɛ kuruwa a ɛyɛ hyew mu no akyi.
Sua lid retention bere a woakura, de akɔ na woanom mpɛn pii akyi.
Hwɛ sɛnea nsuo retu ne mframa a ɛkɔ mu wɔ anonneɛ no dwumadie mu hyeɛ a ɛkyɛn so.
Si so dua sɛ sip opening no mma anoano a ɛyɛ nnam anaasɛ nsu a ɛsen dodo.
Mfa nkataso no nhyɛ microwave mu gye sɛ wɔagye ade pɔtee no atom pɔtee sɛ wɔde bedi dwuma saa.
Fa nnaka sie baabi a ɛhɔ yɛ hyew, owia hann tẽẽ ne adekoradan a ɛhɔ yɛ hyew kɛse.
Kafe kuruwa anoano ne anonne ne adetɔfo anofafa di nkitaho tẽẽ. Ɛsɛ sɛ adetɔfo hu gua a wɔrekɔ, ɔhyew a wɔpɛ sɛ wɔnom, bere a wɔde di nkitaho, kɔla ne nneɛma biara a wɔde ka ho ansa na wɔabisa nkrataa a ɛfa aduan a wɔde di nkitaho ho.
Bisa mpaemuka ne atutra sɔhwɛ ma formula a wɔawie pɛpɛɛpɛ.
Si so dua sɛ kɔla masterbatch ne processing aids ka nhwehwɛmu no ho.
Fa sɔhwɛ tebea horow no hyia anonne a ɛyɛ hyew a ɛne no di nkitaho sen sɛ wode bedi dwuma wɔ dan mu hyew nkutoo mu.
Fa nkate mu sɔhwɛ a wɔapene so di dwuma de hwɛ hua ne dɛ a enni afã biara wɔ baabi a ɛho hia.
Mfa adansedi krataa a efi nkataso kɛse, kɔla anaa beae a wɔyɛ no biako nhyɛ ade biara so a wunsi so dua.
| Nhwehwɛmu Beae | a Wɔkamfo kyerɛ sɛ Hwɛ |
|---|---|
| Nsusuwii ahorow | Abɔnten ntwemu, locking diameter, sorokɔ, sip-bue nsusuwii ne ɔfasu afã horow a ɛho hia |
| Mmaeɛ | Kɔla, nsensanee tuntum, efĩ, forming a enni mũ, flash, warpage ne embossing pefeeyɛ |
| Kuruwa Fit | Installation force, retention, leakage ne yiyi denam kuruwa lot a wɔapene so no so |
| Adwumayɛ a Ɛyɛ Ɔhyew | Deformation, shrinkage, fit retention ne leakage wɔ ɔhyew ne bere a wɔapene so |
| Densting a wɔde yɛ den | Nsaano mpaepaemu, dispenser aduan ne static suban |
| Nneɛma a wɔde kyekyere nneɛma | Asinasin dodow, nsateaa nsɔano, carton ahoɔden, SKU, batch code, labels ne pallet pintinn |
| Nwoma a wɔde kyerɛw | Aduan-nkitahodi ho kyerɛwtohɔ, compostability adansedi krataa kɛse, nhwehwɛmu amanneɛbɔ ne traceability |
Ɔhaw ahorow a ɛwɔ aseɛ ha yi ho wɔ mfasoɔ wɔ sampling ne incoming quality inspection mu. Ɛnyɛ adanse a ɛkyerɛ sɛ ɔhaw biara fi ade a wɔde kata so no mu; kuruwa a wɔyɛ ne sɛnea wɔde di dwuma no betumi ayɛ nea ɛho hia saa ara.
| Ɔhaw a Wɔahu | Nea Ebetumi De Ba | Nhwehwɛmu a Wɔkamfo Kyerɛ sɛ Wɔmfa Nsiesie |
|---|---|---|
| Nkataso no pue | Kuruwa-rim diameter mismatch, poor locking profile anaasɛ ɔhyew distortion | Hwɛ kuruwa ne nkataso mfonini, nkuku profile ne hot-fit retention |
| Nsu a ɛtwetwe twa rim no ho hyia | Engagement a enni mũ, kuruwa a ɛnyɛ kurukuruwa, bead a asɛe anaasɛ sealing contact a ɛnnɔɔso | Hwɛ nkuruwa ankasa mu wɔ tebea horow a ɛyɛ hyew, ɛdannan ne nea wɔde soa mu |
| Lid warps bere a wɔde ɔhyew ahyɛ mu ma akyi | PLA crystallinity a ɛmfata, afã horow a ɛyɛ tratraa anaasɛ ɔhyew a ɛkorɔn sen nea wɔapene so | Si CPLA grade, ɔfasu kyekyɛ ne ɔsom hyew so dua |
| Ntama a wɔde kata so no bata ho | Stacking geometry, static a ɛboro so, ɔhyew a ɛda adi anaasɛ packing compression | Hwɛ denesting ribs, sleeve packing ne storage tebea horow mu |
| Sip flow no nyɛ nea ɛkɔ so daa | Mframa a wɔasiw anaasɛ ɛnnɔɔso, geometry a ɛbue anaasɛ forming a ɛnhyia | Hwɛ vent beae, opening finish ne finished-lid profile |
| Mpaapaemu anaa anoano a ɛyɛ nnam a wotumi hu | Brittle formulation, awɔw a wɔde di dwuma, adwinnade a asɛe anaasɛ trim nhyɛso a ɛboro so | Hwehwɛ edge quality, conditioning, punch nnwinnade ne packaging |
| Hua anaa dɛ a wɔnhwɛ kwan | Nneɛma a wɔde yɛ, nneɛma a wɔde ka ho, efĩ a wɔde sie anaasɛ nneɛma a wɔde yɛ adwuma | Fa aduan a wɔde di nkitaho ne nkate mu nhwehwɛmu a ɛfa grade pɔtee bi ho di dwuma ansa na wɔayi no adi |
Kyerɛkyerɛ anonne nhyehyɛe no mu: Si so dua sɛ wode bedi dwuma wɔ ɔhyew anaa awɔw mu, anonne no hyew, nkuruwa akɛse, afe afe dodow ne gua a wɔde asi wɔn ani so.
Fa nkuruwa nhwɛsode anaa mfonini ahorow ma: Fa ananmusifo nkuruwa fi baabi a wopɛ sɛ wɔyɛ no ma.
Paw nneɛma ne adwini: Si CPLA anaa PLA, kɔla, lid profile, sip opening, vent ne adansedi ahwehwɛde ahorow so dua.
Hwɛ nnwinnade a ɛwɔ hɔ dedaw no mu: Fa nkuku a ɛwɔ hɔ no hyia anaa siesie OEM nnwinnade ho nyansahyɛ.
Approve samples: Sɔhwɛ sɛnea ɛfata, leakage, ɔhyew, densting, hwɛbea, hua ne packaging.
Si specifications: Fa wo nsa hyɛ mfonini, kɔla gyinapɛn, QC nhyehyɛe, packing kwan ne adansedi scope ase.
Yɛ na hwɛ: Comple molding, in-process checks, sɔhwɛ a etwa to, carton packing ne shipment ahosiesie.
CPLA ne PLA nneɛma yɛ nea ɛyɛ mmerɛw sɛ ɛbɛhyew bere tenten. Ɛsɛ sɛ wɔde nnaka no sie adekoradan a ɛhɔ yɛ nwini na ɛhɔ yɛ kusuu mu a owia hann tẽẽ, nkuku a ɛyɛ hyew, ɔhyew ne tebea horow a ɛhɔ yɛ nwini kɛse. Ɛsɛ sɛ nkataso a wɔawie no tra nsateaa a wɔatoto mu mu kosi sɛ wɔde bedi dwuma na ama mfutuma, hua ne efĩ a wɔde di dwuma no so atew.
Sleeve dodow ne carton dodow ne nea ɔkyekyɛ anaa foodservice ahwehwɛde ahorow hyia.
Nkotoku a ɛwɔ mu a nsu ntumi nkɔ mu ne nnaka a wɔde kɔ amannɔne a wɔahyɛ no den.
Batch code, nneɛma, diameter, kɔla ne production-date identification.
Pallet wrapping ne corner ahobammɔ ma amanaman ntam po so hyɛn.
Nhyehyɛe a wɔde bɛhyɛ nsukorade mu a ɛtew ɔhyew a ɛba ne karton a ɛsakra so wɔ baabi a mfaso wɔ so.
B2B anonne nhyehyɛe nso betumi ahwehwɛ nkuruwa a ɛne ne ho hyia, nkataso a ɛyɛ nwini, nsɔe ne nneɛma afoforo a wɔde ma aduan. Ɛsɛ sɛ ade biara nya n’ankasa ɔhyew dodow, aduan a wɔde di nkitaho ho nkrataa ne sɛnea ɛtumi yɛ compost. Nkataso a wotumi de yɛ compost mma ɛnyɛ nea ɛbɛma wɔagye kuruwa ne nneɛma a wɔde di dwuma nyinaa ho adanse.
PLA Aduan Ho Nneɛma a Wɔde Ka Ho
Sɛ wode nsɛm a wɔafa aka a efi wɔn a wɔde lid suppliers ahorow hɔ bɛtoto ho a, bisa aguadi ne mfiridwuma ho nkrataa koro no ara ma SKU biara a wɔresusuw ho. Eyi kwati sɛ wɔde akɛse ahorow, nneɛma a wɔde yɛ nneɛma anaa nneɛma a wɔde kyekyere nneɛma dodow bɛtoto ho te sɛ nea ɛyɛ pɛ.
| Quotation Item | Details a Ɛsɛ sɛ Wosi so dua |
|---|---|
| Wɔapene so sɛ lid model | Abɔnten ntwemu, locking diameter, profile, nneɛma ne kɔla |
| Kuruwa a ɛne ne ho hyia | Honam fam nhwɛsode anaa rim mfonini, kuruwa mfonini, sɔhwɛ hyew ne nea ɛho hia leakage/retention |
| Adanse a ɛfa mmara ho | Destination market, aduan-nkitahodi grade pɛpɛɛpɛ ne sɔhwɛ kyerɛwtohɔ ahorow a ɛwɔ hɔ |
| Adanse a ɛkyerɛ sɛ wotumi yɛ compost | Abodin krataa a ɔde ma, abodin krataa nɔma, SKU/kɔla a wɔakata so ne ahyɛnsode a wɔama ho kwan sɛ wɔmfa nni dwuma |
| Nneɛma a wɔyɛ no sɛnea wɔpɛ | Adwinnade a ɛwɔ hɔ dedaw anaa nkuku foforo, logo adwini, kɔla a ɛne ne ho hyia ne nhwɛsode a wɔpene so |
| Nneɛma a wɔde kyekyere nneɛma ne nea wɔde mena | Asinasin biara sleeve/carton, gross mu duru, carton nsusuwii, pallet dodow ne Incoterms |
| Aguadi mu nsɛm | MOQ biara SKU, bo a wɔsɛe no, nnwinnade ho ka, bere a wɔde di kan ne repeat-order tolerances |
Wobetumi abisa nkataso 50 wɔ nsateaa biara mu ne nkataso 1,000 wɔ kartɔn biara mu nhyehyɛe a wɔada no adi wɔ aduan ho nhoma ahorow pii mu no bere a ɛfata no, nanso wɔde nkataso no geometry a wɔapene so ne ahwehwɛde ahorow a wɔkra no na ɛkyerɛ sɛnea wɔbɛhyehyɛ nneɛma a etwa to.
Nneɛma a egyina dwumadie so a wɔpaw: Wɔhwɛ sɛnea wɔde di dwuma wɔ ɔhyew anaa awɔw mu, kuruwa rim, ɔhyew ne adansedi mu ansa na wɔakamfo akyerɛ.
Kuruwa a ɛfata nhwɛsode: Wobetumi de nkuruwa a adetɔfo de ma ahwɛ sɛnea akataso no kɔ so tra hɔ ne sɛnea ɛtwetwe no.
OEM customization: Diameter, kɔla, profile, embossing, sip bue ne packaging betumi asusuw ho.
Nhyehyeɛ a wɔde hwɛ nneɛma pa so: Wobetumi akyerɛw mfoniniyɛ nsusuwii, fit sɔhwɛ, ɔhyew sɔhwɛ ne packing checks.
Private-label mmoa: Custom cartons, barcodes, SKU labels ne nkrasɛm a wɔde tow gu wɔ hɔ.
Wholesale export supply: Ɛfata ma kɔfe nkɔnsɔnkɔnsɔn, wɔn a wɔkyekyɛ, foodservice brands ne nkuruwa yɛfo.
Nsã a ɛyɛ hyew anaa nwini a wɔde di dwuma ne ɔhyew a ɛsen biara a wɔde hyɛ mu.
Kuruwa tumi, soro diameter, rim mfonini ne honam fam kuruwa nhwɛsode.
Ahwehwɛde lid profile, sip bue, vent ne reclosable feature sɛ ɛwɔ hɔ a.
CPLA anaa PLA nneɛma a wɔpɛ na ɛhwehwɛ sɛ wonya compostability adansedi krataa.
Kɔla, ahyɛnsode a wɔakyerɛw so, kɔkɔbɔ nsɛm ne nneɛma agyiraehyɛde.
Aduan-di nkitaho destination gua ne nkrataa a wɔhwehwɛ.
Order dodow, afe afe nkɔmhyɛ ne sɛ ebia nnwinnade a ɛwɔ hɔ dedaw no yɛ nea wogye tom anaa.
Asinasin wɔ nsateaa biara mu, asinasin wɔ kartɔn biara mu, barcode ne private-label ahwehwɛde ahorow.
Destination hyɛn gyinabea, delivery nhyehyɛe, aguadi nsɛm ne abisade nhwɛso dodow.
Ka Wo Compostable Lid Dwumadi no ho asɛm
Wɔtaa de PLA a emu da hɔ a ɛnyɛ nea ɛyɛ nwini di dwuma de kyekyere anonne a ɛyɛ nwini. CPLA yɛ Crystallized PLA a ɛma ɔhyew a ɛko tia no tu mpɔn na wɔtaa paw ma kɔfe a ɛyɛ hyew ne tii a wɔde kata so. Ɛsɛ sɛ wɔda so ara sɔ ɔhyew a ɛwɔ mu ne nea wɔawie no hwɛ.
Ɛnsɛ sɛ wɔka ho asɛm sɛ wɔsɛe ntɛmntɛm wɔ asase, nsu, nwura anaa baabi a wɔtow nneɛma gu. Wɔayɛ nneɛma a wɔagye atom ama tebea pɔtee bi a wɔde yɛ compost, mpɛn pii no mfiridwuma mu composting, na ɛhwehwɛ sɛ wonya kwan kɔ beae a ɛfata a wɔboaboa nneɛma ano na wɔyɛ ho adwuma.
Bere a akataso a wɔawie pɛpɛɛpɛ no kura adansedi krataa a ɛfata a ɛkyerɛ sɛ wotumi de nwura gu fie nkutoo. Ɛnsɛ sɛ wɔde adansedi krataa a ɛkyerɛ sɛ nneɛma a wɔde yɛ nwura yɛ adwuma wɔ fie no ma sɛ nea wɔde kyerɛ sɛ wobetumi ayɛ nwura wɔ fie.
Dabi, kuruwa a ɛtumi yɛ no nkyerɛ rim geometry. Ɛsɛ sɛ ne soro ntwemu, rolled-rim thickness ne bead profile ne lid no hyia. Ɛsɛ sɛ wɔde kuruwa ankasa no sɔ nhwɛsode ahorow hwɛ ansa na wɔakra.
Guadiɛ mu ntwemu a wɔtaa de di dwuma no bi ne bɛyɛ 62, 72, 79/80, 85 ne 89/90mm. Wallis a ɛwɔ hɔ no gyina nkuku a ɛwɔ hɔ dedaw, profile, nneɛma, dodow ne sɛnea ɛne adetɔfo no nkuruwa hyia so.
Ɔhyew tumi gyina resin, crystallinity, pigment, adwini ne kuruwa a ɛfata so. Ɛsɛ sɛ adetɔfo kyerɛ ɔhyew a ɛsen biara a wɔde hyɛ mu ne bere a wɔde kura mu sɛnea ɛbɛyɛ a wobetumi asɔ akataso a wɔawie no ahwɛ sɛ ɛyɛ deformation, leakage ne retention.
Aane. Wobetumi aka kɔla fitaa, tuntum, abɔde ne amanne kwan so kɔla ho asɛm. Ɛsɛ sɛ wɔsɔ pigments hwɛ sɛ wɔde di dwuma wɔ aduane a ɛne wɔn ho di nkitaho, ɔhyew adwumayɛ, compostability adansedie ne MOQ.
Wɔpɛ ahyɛnsode ahorow a wɔakyerɛw so anaasɛ wɔayiyi so ama nkataso pii a wɔayɛ no. Ebia nneɛma a wɔde siesie fie a wɔatintim no behia sɛ wɔsan hwɛ aduan a wɔde di nkitaho ne sɛnea ɛyɛ compost mu nhwehwɛmu foforo. Nnwinnade ho ka gyina logo kɛse, gyinabea ne nea ɛyɛ den so.
Ɛsɛ sɛ aduan ho adwuma akataso de nneɛma a wɔde yɛ nneɛma a ɛne mmara hyia di dwuma na edi hua ne nkate mu ahwehwɛde ahorow a wɔapene so no ho dwuma. Ɛsɛ sɛ adetɔfo a wɔwɔ ahwehwɛde ahorow a emu yɛ den no pene so sɛ wɔbɛsɔ anonne a ɛyɛ hyew hua ne ne dɛ ahwɛ wɔ nhwɛsode ahorow a wɔyɛ no so.
Ɛnsɛ sɛ wɔfa no sɛ wɔde microwave di dwuma. Gye sɛ wɔagye akataso pɔtee no atom pɔtee ama microwave tebea horow, yi ansa na woayɛ hyew.
Fa nnaka a wɔatoto mu sie baabi a ɛhɔ yɛ nwini na ɛhɔ yɛ kusuu a owia hann tẽẽ, ɔhyew ne nkuku a ɛhɔ yɛ hyew nkɔ. Ɔhyew a ɛboro so betumi asɛe nkataso anaasɛ ɛbɛtew nsusuwii a ɛkɔ so pɛpɛɛpɛ no so.
Aane. Ɛsɛ sɛ adetɔfo sɔ nhwɛsode hwɛ sɛ ɛyɛ kuruwa a ɛfata, pop-off resistance, ɔhyew deformation, leakage, sipping, denesting, hua, kɔla ne dispenser compatibility.
MOQ gyina sɛ ebia wobetumi de nkuku a ɛwɔ hɔ dedaw adi dwuma, ne ne kɛse, kɔla, ahyɛnsode, nneɛma a wɔde kyekyere nneɛma, nneɛma ho adansedi ne afe afe ahwehwɛde so. Mpɛn pii no, nnwinnade foforo ne kɔla ahorow a wɔahyɛ da ayɛ no hwehwɛ sɛ wɔbɔ nne kɛse.
Fa kuruwa nhwɛsode anaa rim mfonini, anonne hyew, lid diameter, design, nneɛma, kɔla, logo, adansedi, dodow, packing, baabi a wɔrekɔ ne da a wɔde bɛkɔ ma.
Dabi, pigments, processing additives, lid thickness ne ade a wɔawie awie no betumi asesa adansedi krataa a wɔde kata so. Bisa nkrataa a ɛkyerɛ lid SKU ne kɔla pɔtee.
Ebia wɔbɛfata bere a kuruwa no ano ne nea wɔde to ano no geometry hyia no, nanso ɛsɛ sɛ wɔde honam fam nkuruwa anaa mfiridwuma ho mfonini a wɔapene so kyerɛ sɛ ɛfata. Nominal diameter a ɛne no hyia nkutoo nnɔɔso.
Ɛnsɛ sɛ wosusuw sɛ CPLA ne PET toa a wɔsan de di dwuma a wɔtaa de di dwuma no hyia. Di ahwehwɛde ahorow a ɛfa nneɛma a wɔboaboa ano ne mfiridwuma mu-composting a ɛfa gua a wɔde kɔ ne ade a wɔagye atom no akyi.
Aane. Pigments, decorations ne nsakrae afoforo betumi aka adansedi krataa a ɛwɔ hɔ dedaw no kɛse. Ansa na wobɛtintim nneɛma a atwa yɛn ho ahyia ho nkyerɛwde anaa adansedi agyiraehyɛde bi no, si so dua sɛ nkataso a wɔawie a wɔayɛ mu nsakrae no da so ara kata so.
Wobetumi asusuw nhyehyɛe a wɔde kyekyere nneɛma ho ama OEM ahyɛde ahorow, a nea ɛka ho ne nsateaa dodow, private-label cartons, barcodes, pallet dimensions ne export labels. Nea etwa to a wobetumi anya no gyina ade no kɛse, nnwinnade ne dodow a wɔkra so.
Di Wallis Plastic ho nkɔmmɔ na woanya CPLA kuruwa a ɛyɛ hyew akataso ne PLA nkuruwa a ɛyɛ nwini akataso a wɔayɛ ama kɔfe nkɔnsɔnkɔnsɔn, wɔn a wɔkyekyɛ aduan ho adwuma, wɔn a wɔyɛ nkuruwa ne nhyehyɛe ahorow a wɔde kyekyere nneɛma a ɛyɛ ankorankoro de. Yɛn kuw no boa kuruwa-fit nhwehwɛmu, kɔla ne embossing customization, adansedi matching ne factory-direct bulk supply.
Bisa Nhwɛsode ne Factory Quote
