|
wallis
Wallis bin de tɔk bɔt am
| Kɔlɔ: | |
|---|---|
| Tik: | |
| Aplikeshɔn: | |
| Kwantiti: | |
Wallis kɔstɔm kɔmpɔstabl CPLA kɔfi kɔp lid dɛn we dɛn mek fɔ tek-away kɔfi, ti, ɔt chɔklɛt ɛn ɔda ɔt-drink savis. Dɛn de gi sikrit snap fit, kɔvinant sip opin ɛn kɔstɔmayz kɔlɔ fɔ kɔfi chen, fudsavis distribyushɔn, kɔp manifakta, pak impɔtɔ ɛn prayvet-lɛbul brand.
Fכ hot-kכp aplikεshכn, kristכlayz PLA—we dεn kכmכn kכl CPLA —dεn kin nכmal fכ sεlekt biכs i de gi bכku hεt rεsistεns pas klia amorphous PLA. Transparent PLA lid dɛn kin jɔs de fɔ kol drink. So dɛn fɔ kɔnfɔm matirial gred, kɔp-rim dayamita, lid profayl, drink tɛmpracha ɛn kɔmpɔstabiliti sɛtifikeshɔn fɔ ɛni prɔjek.
Wallis de sɔpɔt standad ɛn OEM lid dayamita, wayt, blak, natura ɛn kɔstɔmayz kɔlɔ, ɛmbos logo, sip-thru dizayn, rital ɔ fudsavis pak ɛn ɛkspɔt-rɛdi bɔlk saplai. Samplε dεm fכ tεst wit di bayer in aktual kכp bifo mas prodakshכn biכs nominal kכp kapasiti nכmכ nכ de garanti lid kכmpatibiliti.
| Tayp fɔ Prodakt | CPLA sip-through lid fɔ ɔt pepa kɔp dɛn; PLA opshɔn fɔ kol kɔp dɛn we dɛn kin rivyu fɔ di aplikeshɔn |
| Di Tin dɛn we Yu Go Yuz fɔ Du | CPLA, klia PLA ɔ projɛkt-spɛsifi k kɔmpɔstabl fɔmyulashɔn bays pan tɛmpracha ɛn sɛtifikeshɔn nid |
| Kɔmɔn Dayamita Rɛnj | lεk 62–90mm fכ kכmכn fכdsavis kכp dεm; di ekzak tul ɛn kɔp-rim fit fɔ kɔnfɔm |
| Di tin dɛn we yu kin pik fɔ gɛt kɔlɔ | Wait, blak, natura, transparent fɔ fayn kol aplikeshɔn ɛn kɔstɔmayz kɔlɔ dɛn we de ɔnda MOQ |
| Kastamayzeshɔn | Dayamita, lid profayl, sip opin, ɛmbos, kɔlɔ, pak ɛn katɔn mak |
| B2B Savis dɛn | Cup-fit sampul, tul rivyu, sɛtifikeshɔn maching, OEM pak, kwaliti inspekshɔn ɛn ɛkspɔt saplai |
Rikwest CPLA Lid Sampl ɛn B2B Kɔt
Bɔku tɛm dɛn kin yuz 'PLA lid' as brayt makɛt wɔd, bɔt ɔt ɛn kol drink lid nɔ kin yuz di sem fɔmyulashɔn. Fɔ pik di kɔrɛkt matirial impɔtant fɔ dimɛnshɔnal stebiliti, lid ritɛnshɔn ɛn sef drink savis.
| Selekshɔn eria | CPLA Hot Kɔp Lid | Klia PLA Kol Kɔp Lid |
|---|---|---|
| Matirial Strukchɔ | Kristalayz PLA we dɛn fɔmulayt fɔ impɔtant ɔt rɛsistɛns | Transparent amorphous PLA fɔ kol ɔ limited wam aplikeshɔn dɛn |
| Di Tipik Apɛndiks | Bɔku tɛm, i kin wayt, natura ɔ kɔlɔ ɛn opaque | Bɔku tɛm, i kin klia ɔ i kin klia |
| Di Tipik Fɔ Yuz fɔ drink | Kɔfi, ti, ɔt chɔklɛt ɛn ɔda ɔt tek-away drink dɛn | Ays kɔfi, jus, smoothies ɛn kol drink |
| Kritikal Tɛst | Hot-fil fit ritɛnshɔn, difɔmeshɔn, lik ɛn sip-opin pefɔmɛns | Kol-kɔp fit, krak rɛsistɛns, kɔndɛnseshɔn ɛn straw-hol pefɔmɛns |
| Usay fɔ kip | Kip kol, dray ɛn fa frɔm dairekt san ɛn ɔt; fala di gred-spɛsifi k stɔrɔj gayd | |
Kastom Kɔlɔ fɔ Foodservice Brand dɛn
Sip-Through hot kap lid
Di Wallis pej we de naw de list wayt, transparent ɛn kɔstɔmayz kɔlɔ dɛn wit wan brayt 0.2–2mm tiknɛs rɛnj. Fɔ di lid dɛn we dɔn dɔn, di wan dɛn we de bay fɔ spɛsifa di kɔmplit molded-lid drɔin, di yunit wet ɛn di impɔtant wɔl-tiknɛs profayl pas fɔ abop pan wan nominal shit-tiknes valyu.
| Paramita | Spɛsifikeshɔn ɛn Pɔch Notis |
|---|---|
| Tin dɛn | CPLA fɔ hot-kɔp lid dɛn; klia PLA fɔ di rayt kol-kɔp lid dɛn; ɛksaktɔ rɛsin ɛn aditiv dɛn we gɛt sɛtifiket |
| Kɔmɔn Lid Dayamita | Na lɛk 62, 72, 79/80, 85 ɛn 89/90mm; kompitibiliti dipen pan di kɔp-rim jɔyometri |
| Kapasiti fɔ Kɔp | Espresso, 6oz, 8oz, 10oz, 12oz, 16oz ɛn 20oz program dɛn we de ɔnda di maching kɔp siriɔs |
| Lid Profayl | Flat sip lid, rayz sip lid, dome profayl, no-hol lid ɔ kɔstɔmayz dizayn we de ɔnda tul |
| Kɔlɔ | Wait, blak, natura ɛn kɔstɔmayt kɔlɔ dɛn; transparent opshɔn dɛn nɔmal fɔ aplay to kol-grɛd PLA |
| Branding we dɛn kin yuz fɔ mek tin dɛn | Embossed logo, debossed mɛsej, risaykul ɔ kɔmpɔstabiliti mak ɛn kɔstɔm katon lɛbl dɛn |
| Fɔ pak tin dɛn | Sliv bag ɛn ɛkspɔt katɔn dɛn; kɔmɔn makɛt pak na 50 pis fɔ wan sliv ɛn 1,000 pis fɔ wan katon |
| MOQ we gɛt fɔ du wit am | Dipen pan di mold we de naw, dayamita, kɔlɔ, logo, sɛtifiket, pak ɛn fɔkɔs ɛvri ia |
Tu kɔp dɛn we gɛt di sem ɔns kapasiti kin gɛt difrɛn tɔp dayamita, tik we dɛn rol-rim ɛn bid shep. Wan lid we dɛn aydentify ɔl as '12oz' kin so nɔ ebul fɔ snap pan kɔp frɔm ɔda siriɔs. B2B bayer dɛn fɔ gi aktual kɔp, rim drɔin ɔ prɛsis mɛzhɔmɛnt fɔ kɔmpitibliti tɛst.
Maksimal ɔdasay dayamita fɔ di rim we dɛn dɔn rol fɔ kɔp.
Minimum dayamita dɔŋ di rim bidz.
Rim tik, bidz ayt ɛn pepa-wɔl kɔnstrɔkshɔn.
Kɔp ovaliti afta fɔm, stak ɛn hot filin.
If di kɔp gɛt sayd simpul we pɔsin kin si we de afɛkt di we aw di lid de go.
Snap-on instɔleshɔn fɔs ɛn ɔdibul ɛnjɔymɛnt.
Fɔs fɔ pul ɛn aksidɛntal pop-ɔf rɛsistɛns.
Hot-beverage lik we yu tilt ɔ kɛr am.
Difɔmeshɔn afta yu dɔn ful-ɔp ɛn ol am na di tɛmpracha we yu want.
Sip-opening flow, vent funkshɔn ɛn yuza kɔmfɔt.
Stak, denest ɛn ɔtomɛtik lid-dispɛnsa kɔmpatibiliti.
Bɔku Dayamita fɔ Kɔp Program dɛn
OEM Lid ɛn Kɔp Kɔmpatibiliti
Kɔlɔ kin ɛp fɔ difrɛns di drink saiz, di kayn drink, di kɔnsɛpt fɔ di stoa ɔ di prayvet-lɛbul rɛnj. Wait ɛn natura shed na kɔmɔn fɔ CPLA, we dɛn kin yuz blak ɔ kɔstɔm pigmɛnt we dɛn fɔmyulashɔn, it-kɔntakt ɛn kɔmpɔstabiliti rikwaymɛnt dɛn stil satisfay.
Embossed branding kin intagret insay di mold we yu nɔ put ink dairekt pan di lid. Di wan dɛn we de bay kin aks fɔ logo, kɔp-siris kɔd, 'Caution Hot,' matirial aydentifikeshɔn ɔ sɛtifiket kɔmpɔstabiliti mak, if dɛn alaw di klem ɛn simbul fɔ di ɛksaktɔl prodak we dɔn dɔn.
| Kastamayzeshɔn | B2B Rikwaymɛnt |
|---|---|
| Kastom Kɔlɔ | Panton ɔ fizik kɔlɔ sampul, pigmɛnt aprɔval, it-kɔntakt stetɔs ɛn kɔmpɔstabiliti impak |
| Logo we dɛn dɔn ɛmbos | Vektor artwok, minim layn wit, embossing dip, oriɛnteshɔn ɛn mold kɔst |
| Kastom Sip Opin | Drink flɔ, ventin, lip kɔntakt, splash kɔntrol ɛn tul validɛshɔn |
| Sɛtifiket Mak | Dɛn kin yuz am nɔmɔ we di rayt prɔdak ɛn laysens kɔndishɔn dɛn alaw di mak |
| Prayvet-Lɛbul Katɔn | Bakod, SKU, langwej, dispɔzishɔn instrɔkshɔn, katon dimɛnshɔn ɛn palet kɔnfigyushɔn |
Dɛn nɔ fɔ tɔk bɔt PLA ɛn CPLA prɔdak dɛm se dɛn de disappear natin nɔ de apin na ɛvri envayrɔmɛnt. Wan klem lɛk 'industrially compostable' fɔ kɔnɛkt to wan standad we dɛn no, sɛtifiket bɔdi, ɛksaktɔ prodak fɔmyulashɔn ɛn di avaylabl fɔ wan aksepting kɔmɛshɔnal kɔmpɔstin fasiliti.
Sɛtifiket dɛn kin kɔmɔn fɔ rɛfrɛns standad dɛn lɛk ASTM D6400, EN 13432 ɔ ikwal rijinal rikwaymɛnt dɛn. Indastrial kɔmpɔstin de yuz kɔntrol tɛmpracha, mɔstɔ, ɔksijɛn ɛn prɔsesin tɛm. Sɛtifiket fɔ di bays rɛsin nɔmɔ nɔ kin kɔba di lid we dɔn dɔn afta dɛn ad pigmɛnt, aditiv, lɛbl ɔ ɔda kɔmpɔnɛnt dɛn.
Kɔmpɔst we dɛn kin yuz na os kin wok na di tɛmpracha we smɔl ɛn we dɛn nɔ kin kɔntrol bɛtɛ. Di lid nɔ fɔ de na makit as kɔmpɔstabl na os pas di rayt tin we dɛn dɔn dɔn gɛt di rayt sɛtifiket fɔ di makit we dɛn want fɔ mek.
Lid dɛn we dɛn kin kɔmpostabl nɔ kin gɛt industrial kɔmpɔst kɔndishɔn na ɔdinari landfil ɔ say dɛn we gɛt dɔti. PLA kin nid bak fɔ separet frɔm kɔvɛnshɔnal PET risaykul strim dɛn. Di instrɔkshɔn dɛn fɔ dispɔz fɔ fala di kɔlɛkshɔn ɛn prɔsesin infrastukchɔ we de na di dɛstineshɔn makit.
Plant-Based Lid Opshɔn fɔ Sɛtifiket Kɔmpɔst Program dɛn
Hot-kɔp pefɔmɛns dipen pan kristaliniti, rɛsin gred, pigmɛnt, lid dizayn, wɔl tik, kɔp fit ɛn drink tɛmpracha. Dɛn nɔ fɔ yuz jenɛral PLA klem fɔ gri fɔ gi ɔt kɔfi savis. Di ɛksaktɔl CPLA lid fɔ tɛst na di ays filin tɛmpracha ɛn di tɛm we di kɔstɔma de ɛkspɛkt fɔ ol am.
Test difɔmeshɔn jɔs afta dɛn dɔn fit di lid to kɔp we ful-ɔp wit ɔt.
Mekɔp di lid ritɛnshɔn afta yu dɔn ol, transpɔt ɛn ripit sip.
Chek lik ɛn venting na di drink in maksimal savis tɛmpracha.
Kɔnfɛm se di sip opin nɔ de mek shap ed ɔ flɔ pasmak.
Nɔ maykrowev di lid pas nɔmɔ dɛn dɔn validet di rayt prɔdak fɔ da yus de.
Stɔr katɔn dɛn fa frɔm hita, dairekt san layt ɛn ay-tɛmpracha westɛm.
Kɔfi kɔp lid dɛn kin kɔntakt di drink dɛn ɛn di wan dɛn we de bay dɛn lip dairekt wan. Di wan dɛn we de bay fɔ no di say we dɛn want fɔ drink, di tɛmpracha we dɛn want fɔ drink, di tɛm we dɛn go kɔntakt am, di kɔlɔ ɛn ɛnitin we dɛn ad bifo dɛn aks fɔ mek dɛn rayt di tin dɛn we dɛn go tɔk bɔt fɔ it.
Rikwest diklareshɔn ɛn maykreshɔn tɛst fɔ di ɛksaktɔl fɔmyulashɔn we dɔn dɔn.
Kɔnfɛm se di kɔlɔ mastabatch ɛn prɔsesin ɛd dɛn de insay di asɛsmɛnt.
Match di kɔndishɔn fɔ tɛst to ɔt drink kɔntakt pas fɔ yuz am na rum-tɛmpracha nɔmɔ.
Verifay di smel ɛn teist nyutraliti yuz wan agreed sensory test usay nid de.
Nɔ aplay sɛtifiket frɔm wan lid saiz, kɔlɔ ɔ prodakshɔn sayt to ɛvri prɔdak we yu nɔ kɔnfɔm.
| Inspekshɔn Ɛria | Rikɔmɛnd Chɛk |
|---|---|
| Dimenshɔn dɛn | Ɔdasay dayamita, lɔk dayamita, ayt, sip-opin dimɛnshɔn ɛn krichɔl wɔl sɛkshɔn dɛn |
| Aw a luk | Kɔlɔ, blak spat, kɔntaminɛshɔn, fɔm we nɔ kɔmplit, flash, wɔpej ɛn ɛmbos klia |
| Cup Fit we yu go yuz | Instɔlɛshɔn fɔs, ritɛnshɔn, lik ɛn rimɔv yuz di aprɔv kɔp lɔt |
| Hot Pɔfɔmɛnshɔn | Difɔmeshɔn, shrink, fit ritɛnshɔn ɛn lik na di tɛmpracha ɛn tɛm we dɛn dɔn gri fɔ |
| Denest we de mek pɔsin bɔn | Manual separeshɔn, dispɛnsa fidin ɛn statik bihayvya |
| Fɔ pak tin dɛn | Pis kaunt, sliv siling, katon trɛnk, SKU, batch kɔd, lɛbl ɛn palet stebiliti |
| Dokumɛnt dɛn | Fɔd-kɔntakt rɛkɛd, kɔmpɔstabiliti sɛtifiket skɔp, inspekshɔn ripɔt ɛn traysabiliti |
Difayn di drink program: Kɔnfɔm di we aw yu de yuz am ɔt ɔ kol, di tɛmpracha fɔ drink, di kɔp saiz dɛn, di volyum we dɛn kin gɛt ɛvri ia ɛn di makit we yu want fɔ drink.
Gi kɔp sɛmpul ɔ drɔin: Saplae ripɔt kɔp frɔm di say we dɛn want fɔ mek.
Pik di matirial ɛn dizayn: Kɔnfɔm CPLA ɔ PLA, kɔlɔ, lid profayl, sip opin, vent ɛn sɛtifikeshɔn rikwaymɛnt.
Rivyu di tul dɛn we dɔn de: Match wan mol we de ɔ pripia wan OEM tul prɔpɔzal.
Apruv sampul dɛm: Test fit, lik, ɔt, denest, apinans, smel ɛn pak.
Kɔnfɔm spesifikeshɔn dɛn: Sayn di drɔin, kɔlɔ standad, QC plan, pak we ɛn sɛtifikeshɔn skɔp.
Prodyuz ɛn inspɛkt: Kɔmplit mold, in-prɔses chɛk, fainal tɛst, katon pak ɛn shipmɛnt pripia.
CPLA ɛn PLA prodakt dɛn kin sɛnsitiv to ɔt fɔ lɔng tɛm. Dɛn fɔ kip katon dɛn na say we kol ɛn dray we de fa frɔm dairekt san layt, ɔt kɔntena, hita ɛn ples we gɛt bɔku bɔku wata. Di lid dɛn we dɔn dɔn fɔ de na sliv dɛn we dɛn dɔn sial te dɛn yuz am fɔ ridyus dɔst, smel ɛn fɔ handle kɔntaminɛshɔn.
Sliv kwantiti ɛn katon kɔnt mach to distribyushɔn ɔ fudsavis rikwaymɛnt.
Inna bag dɛn we nɔ de mek wata ɛn ɛkspɔt katɔn dɛn we dɛn dɔn riinfɔs.
Batch kod, matirial, dayamita, kala ɛn prodakshɔn-deti aydentifikeshɔn.
Pallet wrapping ɛn kɔna protɛkshɔn fɔ intanashɔnal shiping.
Kɔntena-lod plan dɛn we de ridyus ɔt ɛksplɔshɔn ɛn katɔn difɔmeshɔn usay i pɔsibul.
B2B drink program dɛn kin nid bak kɔmpitabl kɔp, kol lid, straw ɛn ɔda tin dɛn fɔ it. Ɛni kɔmpɔnɛnt fɔ gɛt in yon tɛmpracha rɛytin, it-kɔntakt dɔkyumentri ɛn kɔmpɔstabiliti stetɔs. Lid we dɛn kin kɔmpɔst nɔ kin mek di kɔmplit kɔp-ɛn-aksesɔri sistɛm gɛt sɛtifiket ɔtomɛtik wan.
Kɔmplimɛnt PLA Foodservice Aksesɔri dɛn
Aplikeshɔn-based sɛlɛkshɔn: Dɛn kin rivyu yuz ɔt ɔ kol, kɔp rim, tɛmpracha ɛn sɛtifiket bifo dɛn rɛkɔmɛnd.
Cup-fit sampling: Dɛn kin ebul fɔ evaluate di lid ritɛnshɔn ɛn lik bay we dɛn yuz kɔp dɛn we di kɔstɔma dɛn gi.
OEM kɔstɔmayshɔn: Dayamita, kɔlɔ, profayl, ɛmbos, sip opin ɛn pak kin tɔk bɔt.
Kwaliti-kɔntrol planin: Dɛn kin rayt di dimɛnshɔn fɔ drɔ, fit tɛst, ɔt tɛst ɛn pak chɛk.
Prayvet-lɛbul sɔpɔt: Kastom katon, barɔd, SKU lɛbl ɛn dispɔzishɔn mɛsej de.
Wholesale export supply: I fayn fɔ kɔfi chen, distribyushɔn, fudsavis brand ɛn kɔp manifakta.
Hot ɔ kol drink aplikeshɔn ɛn maksimal filin tɛmpracha.
Kɔp kapasiti, tɔp dayamita, rim drɔin ɛn fizik kɔp sɛmpul dɛn.
Rikwayd lid profayl, sip opin, vent ɛn riklɔz ficha if ɛni wan de.
CPLA ɔ PLA matirial prɛferɛns ɛn nid kɔmpɔstabiliti sɛtifiket.
Kɔlɔ, ɛmbos logo, wɔnin tɛks ɛn matirial mak dɛn.
Food-contact destination market ɛn di dɔkyumɛnt dɛn we dɛn nid.
Ɔda kwantiti, ɛni ia fɔkɔs ɛn if di tul dɛn we de naw na akseptabl.
Pis fɔ wan sliv, pis fɔ wan katon, barɔd ɛn prayvet-lɛbul rikwaymɛnt dɛn.
Destineshɔn pɔt, delivri schedule, tred tɛm ɛn rikwest sampul kwantiti.
Tɔk bɔt Yu Kɔmpostabl Lid Projɛkt
Klia amorphous PLA na in dɛn kin yuz fɔ pak kol-drink. CPLA na kristal PLA wit impɔtant ɔt rɛsistɛns ɛn nɔmal wan dɛn kin pik am fɔ ɔt kɔfi ɛn ti lid. Di rayt gred ɛn di lid we dɔn dɔn fɔ stil gɛt tɛmpracha-tɛst.
Dɛn nɔ fɔ tɔk se dɛn kin pwɛl kwik kwik wan na grɔn, wata, dɔti ɔ dɔti. Dɛn mek di prɔdak dɛn we gɛt sɛtifiket fɔ sɔm patikyula kɔndishɔn dɛn fɔ kɔmpɔst, we dɛn kin yuz fɔ mek kɔmpɔst na di industri, ɛn dɛn nid fɔ gɛt akses to fayn ples fɔ gɛda ɛn trit.
Na we di ɛksaktɔl lid we dɔn dɔn gɛt di rayt sɛtifiket fɔ mek dɛn ebul fɔ du am na os. Industrial-compostability certification nɔ fɔ bi prɛzɛnt as hom-kɔmpostabiliti klem.
Nɔ, di kapasiti fɔ di kɔp nɔ de sho di rim jɔyometri. Top dayamita, rol-rim tiknes ɛn bidz profayl fɔ mach di lid. Dɛn fɔ tɛst di sampul dɛn wit di rial kɔp bifo dɛn ɔda.
di kכmכn mכket dayamita dεm inklud lεk 62, 72, 79/80, 85 εn 89/90mm. Wallis avaylabl dipen pan di mold dɛm we de naw, profayl, matirial, kwantiti ɛn kɔmpitibliti wit di kɔstɔma in kɔp dɛm.
di tεmpratura kεpabiliti dipכnt pan di rεsin, kristaliniti, pigmεnt, disayn εn kכp fit. Di wan dɛn we de bay fɔ spɛsifa maksimal filin tɛmpracha ɛn di tɛm fɔ ol so dat dɛn go ebul fɔ tɛst di lid we dɔn fɔ difɔmeshɔn, lik ɛn ritɛnshɔn.
Yɛs. Wi kin tɔk bɔt wayt, blak, natura ɛn kɔstɔm kɔlɔ dɛn. Pigmɛnt dɛn fɔ evalyu fɔ yuz fɔ it-kɔntakt, ɔt pefɔmɛns, kɔmpɔstabiliti sɛtifikeshɔn ɛn MOQ.
Dɛn kin lɛk fɔ yuz logo dɛn we dɛn dɔn ɛmbos ɔ we nɔ gɛt bɔks fɔ bɔku lid dɛn we dɛn dɔn mol. Di dekɔreshɔn we dɛn print kin nid fɔ gɛt ɔda tin dɛn we dɛn kin du fɔ kɔntakt di it ɛn fɔ mek dɛn rivyu di kɔmpɔstabiliti. Tulin kɔst dipen pan logo saiz, pozishɔn ɛn kɔmplisiti.
Fɔdsavis lid dɛn fɔ yuz raw matirial dɛn we de fala di lɔ ɛn mit di tin dɛn we dɛn gri fɔ du fɔ smɛl ɛn di sɛns we dɛn nid. Di wan dɛn we de bay wit strikt rikwaymɛnt fɔ gri fɔ tɛst ɔt-drin ɔda ɛn teist pan prodakshɔn sɛmpul dɛn.
Dɛn nɔ fɔ tink se dɛn de yuz maykrowev. If dɛn nɔ dɔn validet di rayt lid spɛshal wan fɔ maykrowev kɔndishɔn, pul am bifo yu ɔt am.
Stɔr katɔn dɛn we dɛn dɔn sial na say we kol ɛn dray we nɔ gɛt dairekt san layt, hita ɛn kɔntena dɛn we gɛt ay tɛmpracha. If di wam wam pasmak, i kin mek di lid dɛn nɔ fayn ɔ i kin mek di dimɛnshɔnal kɔnsistɛns nɔ bɔku.
Yɛs. Di wan dɛn we de bay fɔ tɛst di sampul dɛn fɔ si if dɛn fit fɔ kɔp, fɔ mek dɛn nɔ ebul fɔ pop-ɔf, fɔ mek dɛn gɛt ɔt difɔmeshɔn, fɔ lik, fɔ sip, fɔ denest, fɔ smɛl, fɔ gɛt kɔlɔ ɛn fɔ mek di dispɛnsa kɔmpitibliti.
MOQ dipen pan if dɛn kin yuz wan mold we dɔn de, ɛn bak di dayamita, kɔlɔ, logo, pak, matirial sɛtifikeshɔn ɛn ɛni ia dimand. Nyu tul ɛn kɔstɔm kɔlɔ dɛn nɔmal fɔ nid fɔ gɛt ay volyum.
Gi kɔp sɛmpul ɔ rim drɔin, drink tɛmpracha, lid dayamita, dizayn, matirial, kɔlɔ, logo, sɛtifiket, kwantiti, pak, ples fɔ go ɛn di de we dɛn sɛn am.
Kɔntakt Wallis Plastic fɔ kɔstɔm CPLA hot kɔp lid ɛn PLA kol kɔp lid fɔ kɔfi chen, fudsavis distribyushɔn, kɔp manifakta ɛn prayvet-lɛbul pak program. Wi tim de sɔpɔt kɔp-fit ɛvalueshɔn, kɔlɔ ɛn ɛmbos kɔstɔmayshɔn, sɛtifikeshɔn maching ɛn faktri-dayrɛkt bɔlk saplai.
