Nhwɛsoɔ: 0 Ɔkyerɛwfoɔ: Site Editor Bere a wɔde tintimii: 2025-07-14 Mfiase: Beaeɛ
PVC , PC ne PET magnetic stripe films yɛ kaad-yɛ nneɛma a wɔayɛ sɛ wɔde bɛka magnetic stripe ne Overlay film anaa card substrate abom wɔ lamination ne nsakraeɛ mu. Wɔde yɛ magnetic stripe cards, hybrid smart cards, ID cards, membership cards, hotel key cards, loyalty cards, access credentials ne card nhyehyɛe afoforo a ɛda so ara hia magnetic encoding.
Wɔ animdefo kaad a wɔyɛ mu no, wɔtaa ka ade no ho asɛm yiye sɛ magnetic stripe a wɔadi kan ato Overlay film , magnetic stripe a wɔde akata so Overlay film anaasɛ magnetic laminating film . Wɔde magnetic tape no si PVC , PC , PET anaa polymer a ɛfa ho Overlay film so enti wobetumi de nsensanee no ahyɛ kaad a wɔawie no mu pɛpɛɛpɛ bere a wɔreyɛ lamination no.
Wɔ B2B adetɔfoɔ fam no, ɛnsɛ sɛ nneɛma a wɔpaw no gyina PVC versus PC versus PET nko ara so. Nneɛma a ɛho hia a wɔde tɔ ade no bi ne Overlay film ne kɛse, magnetic coercivity, stripe trɛw, stripe gyinabea, magnetic adwumayɛ, bonding ahoɔden, lamination window, surface finish, printing compatibility, abrasion resistance, card construction ne reader/encoder compatibility.
Wallis nneɛma a wɔde ma PVC , PC ne PET magnetic stripe films a wɔde yɛ kaad , ne nea wɔayɛ no sɛnea wɔpɛ card Overlay film nneɛma a wɔde yɛ lamination, printing ne smart-card yɛ adwuma.
Magnetic stripe Overlay film yɛ Overlay film sini a magnetic tape a wɔde asi beae a wɔahyɛ so ma wɔde ahyɛ plastic kaad a wɔayɛ no laminated mu.
Overlay film no boa ma wɔyɛ kaad na wɔbɔ ho ban wɔ soro, bere a magnetic stripe no ma magnetizable recording medium a wɔde kyerɛw nsɛm.
Overlay film a ɛda adi anaasɛ ɛyɛ adwuma no bɛyɛ kaad nipadua a wɔayɛ no laminated no fã. Ɛgyina nneɛma ne adansi so no, ebetumi aboa ma wɔabɔ ɔfasuo ho ban, sɛnea ɛte, lamination bonding ne card dwumadie foforɔ.
Magnetic tape no kura magnetizable recording layer a wobetumi de magnetic encoder a ɛne no hyia akyerɛw na magnetic stripe reader akenkan.
Sɛ wode stripe no si Overlay film no so ansa na wɔayɛ card lamination a, ɛbɛtumi aboa card manufacturers ma wɔadi stripe beaeɛ so na atew stripe-application dwumadie ahodoɔ so wɔ bere a wɔreyɛ no.
Ɛgyina ade no so no, wobetumi de Overlay film no ama a wɔakata so anaasɛ wɔamfa nkata so. Ɛsɛ sɛ coating nhyehyɛe no ne core krataa, printing ink, lamination process ne peel ahoɔden a wɔhwehwɛ no hyia.
Magnetic stripe a wɔtaa de di dwuma no nam honam fam kankyee so di nkitaho twa magnetic akenkan ti bi ho. Wobetumi de kaad no afa akenkanfo bi mu anaasɛ wɔde ahyɛ mfiri a ɛkenkan nsensanee no mu.
Tapping yɛ adwuma a enni nkitahodi RFID / NFC adwuma . Hybrid card betumi akura magnetic stripe ne contactless chip nyinaa, nanso eyinom yɛ mfiridwuma ahorow a ɛsono emu biara a ɛwɔ data interface ahorow.
Magnetic encoder de magnetic field a wɔahyɛ so di dwuma wɔ stripe no so na ɛkyerɛw data sɛ nsakrae a ɛba magnetization mu wɔ recording track no so.
Sɛ nsensanee no twa magnetic akenkan ti a ɛne no hyia ho a, nsakrae a ɛba magnetic nhyehyɛe no mu no ma nsɛnkyerɛnne a ɔkenkanfo no dan kɔ data a wɔakyerɛw so.
RFID ne NFC kaad no de chip ne antenna a wɔaka abom di dwuma ma nkitahodi a enni nkitahodi. Sɛ wode RFID ka magnetic stripe card ho a, ɛma wonya hybrid card; ɛnsakra sɛnea magnetic stripe no ankasa yɛ adwuma no.
PVC wɔde di dwuma kɛse wɔ aguadi kaad a wɔyɛ mu efisɛ ɛka lamination suban a mfaso wɔ so, printability, flexibility ne ɛka a wɔbɔ bom.
PVC magnetic stripe Overlay film wobetumi de adi dwuma ama asɔremma, nokwaredi, ahɔhodan, akyɛde, kwan a wɔfa so kɔ hɔ ne plastic kaad afoforo a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so bere a stripe nkyerɛkyerɛmu ne kaad a wɔawie no du application no ahwehwɛde ahorow ho.
Wɔtaa susuw polycarbonate ho ma nkwa tenten, multilayer ne ahobammɔ adansedi adan a mfiri a ɛtra hɔ kyɛ, ɔhyew a ɛkorɔn lamination tumi anaa laser personalization betumi ahwehwɛ.
Ɛsɛ sɛ wɔkyerɛkyerɛ lamination temperature pɔtee ma PC grade a wɔapene so ne card stack a edi mũ. Ɛnsɛ sɛ wɔfa no sɛ amansan nyinaa hyew a ɛsen biara wɔ PC Overlay film adansi biara ho.
PET -based films tumi ma dimensional stability, ahoɔden ne nnuru a ɛko tia ma card constructions a wɔapaw. Ɛsɛ sɛ wɔkyerɛ PET grade pɔtee, coating ne lamination compatibility ansa na wɔayɛ.
PET ne PETG yɛ polyester abusua no dea nanso ɛsono dwumadie suban. Ɛsɛ sɛ adetɔfo si so dua sɛ wɔn kaad nhyehyɛe hwehwɛ PET , PETG anaa polyester foforo Overlay film sen sɛ wɔbɛfa din ahorow no sɛ nea wotumi sesa.
| Factor | PVC | PC | PET Ɔkwan a wɔfa so yɛ ade no. |
|---|---|---|---|
| Gyinabea a Wɔtaa De Si Hɔ | Aguadi nkrataa a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so | Multilayer credentials a ɛtra hɔ kyɛ na ahobammɔ wom | Polyester kaad adansi ahorow a wɔapaw |
| Lamination a wɔde yɛ nneɛma | Ɛne PVC kaad lamination nhyehyɛe a wɔtaa de di dwuma no hyia | Ɛfata ma PC -specific higher-teature lamination akwan a egyina grade so | Ɛhwehwɛ sɛ grade- ne coating-specific nhyehyɛe no si so dua |
| Nsakrae a ɛyɛ mmerɛw | Kari pɛ pa ma standard cards | Ahoɔden multilayer adansi tumi | Ɛgyina PET grade ne ne kɛseɛ so |
| Laser Personalization a Wɔde Yɛ Nneɛma | Ɛhwehwɛ sɛ wosisi adan titiriw a ɛfata wɔ baabi a ɛho hia | Wɔtaa de di dwuma wɔ laser-reactive PC kaad nhyehyɛe ahorow ho | Egyina kaad adansi titiriw so |
| Magnetic Stripe a Wɔde Yɛ Nneɛma | Wobetumi asusuw LoCo anaa HiCo akwan horow ho | Wɔtaa kyerɛkyerɛ mu ne HiCo wɔ nnwuma a ɛhwehwɛ pii mu | Project-specific magnetic akwan horow |
| Ɔkwan a Ɛsen Biara a Wɔfa so Paw | Match ka, kaad nkwa ne lamination nhyehyɛe | Match card architecture, ahobammɔ ne ankorankoro | Match pɛpɛɛpɛ polyester grade ne downstream nhyehyɛe |
Nhyɛso kyerɛkyerɛ magnetic field a ɛho hia na ama wɔasesa magnetization a ɛwɔ ade a wɔkyere gu kasɛt so no mu. Wɔ kaad a wɔyɛ mu no, wɔtaa tɔn nsensanee sɛ nea ɛhyɛ obi a ɛba fam, nea ɛhyɛ mfinimfini, nea ɛhyɛ kɛse ne nea ɛyɛ soronko.
LoCo ho nkyerɛkyerɛmu a wɔtaa de di gua ne bɛyɛ 300 Oe . LoCo nsensanee hwehwɛ magnetic field a ɛba fam ma encoding na wɔtaa de bata applications a wɔsan de encode kaad daa, te sɛ atetesɛm magnetic hotel key-card nhyehyɛe.
HiCo nneɛma a wɔtaa de di gua no bi ne bɛyɛ 2750 Oe ne 4000 Oe grades. Wɔhwehwɛ sɛ wonya encoding field a emu yɛ den na mpɛn pii no ɛma wɔko tia kɛse wɔ magnetic popa a wɔpopa wɔ akwanhyia mu no ho.
HiCo ma sɛnea wɔko tia magnetic erasure no tu mpɔn, nanso nhyɛso ne cryptographic ahobammɔ nyɛ ade koro. Sikasɛm, nipasu ne akwan a wɔfa so nya nhyehyɛe no ahobanbɔ gyina adansedi krataa a edi mũ, data a wɔakyerɛw, nokwaredi nhyehyɛe, akenkanfo nhyehyɛe ne adwumayɛ sohwɛ so.
ISO /IEC 7811 kyerɛkyerɛ adwumayɛ ahwehwɛdeɛ a ɛfa magnetic stripe identification cards ho. Ɛnsɛ sɛ adetɔfoɔ ka sɛ 300 Oe, 2750 Oe anaa 4000 Oe boɔ pɔtee bi yɛ amansan nyinaa ahyɛdeɛ a ISO . Mmom no, kyerɛ stripe grade a wɔhwehwɛ na hwehwɛ sɛ kaad a wɔawie no du magnetic adwumayɛ gyinapɛn a ɛfata no ho.
| Parameter | LoCo | HiCo na ɛwɔ hɔ |
|---|---|---|
| Kyerɛ | Nhyɛso a ɛba fam | Nhyɛso a ɛkorɔn |
| Aguadi mu Abasobɔde a Wɔtaa De Di Dwuma | Bɛyɛ 300 Oe | Bɛyɛ 2750 Oe / 4000 Oe |
| Encoding Field a Wɔde Di Dwuma | Deɛ ɛwɔ fam | Ɔkorɔn sen biara |
| Sɛnea Wɔko tia Nneɛma a Wɔpopa Wɔ Akwanhyia Mu | Ɛba fam sen HiCo | Ɔkorɔn sen biara |
| Sɛnea Wɔtaa De Di Dwuma | Magnetic card nhyehyɛe ahorow a wɔtaa san de code gu mu anaasɛ ɛtra hɔ tiaa | Kaad a ɛtra hɔ kyɛ anaasɛ application ahorow a ɛhwehwɛ sɛ wɔko tia kɛse wɔ popa a wɔanhyɛ da ho |
| Akenkanfoɔ a Wɔne Nkitahodiɛ | Fa akenkanfo/encoder a wopɛ sɛ woyɛ no si so dua | Si encoder tumi ne akenkanfo nhyehyɛe a wɔahyɛ da ayɛ no so dua |
Magnetic stripe trɛw ne beae a ɛwɔ no nya kaad nhyehyɛe, encoding tracks, lamination nhyehyɛe ne akenkanfo nhyiam so nkɛntɛnso. Enti ɛsɛ sɛ wɔkyerɛ wɔn wɔ mfonini a wɔayɛ no mfonini no so.
12.7mm yɛ trɛw magnetic-stripe format a wɔtaa de di dwuma wɔ standard card applications mu na ebetumi aboa amanne kwan so magnetic track beae bere a wɔawie card adansi di specification a wɔhwehwɛ akyi.
Wobetumi de nsensanee teateaa te sɛ bɛyɛ 8mm anaa ntrɛwmu afoforo a wɔayɛ no sɛnea wɔpɛ adi dwuma ama adwuma pɔtee bi kaad nhyehyɛe. Ɛsɛ sɛ wɔhwɛ track nhyehyɛe ne akenkanfo ahwehwɛde ahorow ho adanse ansa na wɔapene so.
Ntrɛwmu a wɔde si hɔ daa no ho hia efisɛ ɛsɛ sɛ magnetic tracks a wɔawie no ne magnetic ti a ɛwɔ target reader no mu no hyia yiye.
Tuntum ne bruu yɛ magnetic-stripe a ɛtaa ba, bere a wobetumi asusuw sika kɔkɔɔ, dwetɛ ne kɔla ahorow a wɔayɛ no sɛnea wɔpɛ ho ama branding projects a wɔapaw. Ɛsɛ sɛ magnetic adwumayɛ kɔ so yɛ ade titiriw a wɔde gye tom.
| Nneɛma | a Wɔde Yɛ Nneɛma a Ɛyɛ Den | Magnetic Stripe Types | Stripe Width | Finish Options |
|---|---|---|---|---|
| PVC | 60μm–350μm na ɛwɔ hɔ | LoCo / HiCo a ɛwɔ hɔ | 8mm / 12.7mm / Amanneɛbɔ | Glossy / Matte / Silky a ɛyɛ fɛ |
| PC | 100μm–250μm na ɛwɔ hɔ | HiCo | 12.7mm / Amanneɛbɔ | Ɛda adi pefee / Frosted |
| PET | 80μm–250μm na ɛwɔ hɔ | HiCo | 12.7mm / Amanneɛbɔ | Glossy / Ɛyɛ kusuu |
Ntrɛwmu a ɛwɔ atifi hɔ no kyerɛ adwuma a wɔpaw a wɔde di dwuma wɔ Wallis magnetic-stripe sini mu nsɛm a ɛwɔ hɔ dedaw no mu. Sɛnea ɛwɔ hɔ pɛpɛɛpɛ no betumi ayɛ soronko wɔ Overlay film adansi, ade a wɔde kata so, magnetic tape ne kaad nhyehyɛe so, enti ɛsɛ sɛ wosi ne kɛse a etwa to, nsensanee su ne ne tɛtrɛtɛ so dua wɔ nsɛm a wɔafa aka ne mfiridwuma ho nkyerɛkyerɛmu a wɔapene so no mu.
Dwumadie no foforɔ a wobɛpaw no betumi ayɛ krataa anaa reel formats a wɔayɛ no sɛnea wɔpɛ, coated anaa uncoated Overlay film , laser-reactive card construction, anti-scratch surfaces, magnetic stripe colors a wɔayɛ no sɛnea wɔpɛ ne card features a ɛfa ahobanbɔ ho.
Wobetumi de sheet-format Overlay film ama wɔ A4, A3, A3+ anaa nhyehyɛe a wɔayɛ no sɛnea wɔpɛ mu a egyina kaad yɛfo no tintim, collation ne lamination nhyehyɛe so.
Ebia wɔbɛpɛ reel-format Overlay film ama adwuma a ɛkɔ so anaasɛ ɛyɛ adwuma a ɛyɛ adwuma wɔ baabi a wɔayɛ mfiri a ɛsakra no atwa nneɛma a wɔde roll-fed ayɛ ho ahyia.
Ɛsɛ sɛ adetɔfo de press size, krataa nhyehyɛe, lamination format, reel trɛw, core requirements ne card inposition ho nsɛm ma sen sɛ wɔbɛpaw sheet anaa reel format wɔ unit bo nkutoo so.
Coated Overlay film ka lamination anaa bonding layer a wɔayɛ sɛ ɛbɛma adhesion atu mpɔn wɔ printed core anaa card-body construction no ho.
Wobetumi de Overlay film a wɔankata so adi dwuma bere a kaad adansi, resin nhyehyɛe ne lamination nhyehyɛe no de bonding afiri a wɔhwehwɛ no ma dedaw.
Overlay film adhesion betumi asesa denam offset inks, dijitaal tintim, toner, UV nhyehyɛe, varnish ne soro layers afoforo so. Enti ɛsɛ sɛ wɔde laminated ankasa printed core ne Overlay film bom bere a qualification.
Ɛsɛ sɛ magnetic stripe Overlay film kɔ so hyɛ kaad nipadua no mu yiye wɔ lamination, punching, personalization ne di dwuma mpɛn pii akyi.
Ɛsɛ sɛ wɔde lamination temperature hyia polymer, coating ne card adansi a edi mũ.
Nhyɛso a ɛyɛ pɛ boa ma wonya kaad bonding a ɛkɔ so daa ne soro su wɔ krataa no nyinaa so.
Ɔhyew, nhyɛso ne onwini bere nya adhesive activation, card flatness ne awiei bonding ahoɔden nkɛntɛnso.
Ɛsɛ sɛ wɔn a wɔyɛ kaad no kyerɛkyerɛ peel anaa delamination acceptance test a ɛfata mu ma card nhyehyɛe a wɔpɛ sɛ wɔyɛ no sen sɛ wɔde wɔn ho bɛto nhwehwɛmu a wɔde aniwa hu nkutoo so.
Ɛnsɛ sɛ wɔpene magnet adwumayɛ so wɔ Overlay film a ɛba no nkutoo so. Ɔhyew, nhyɛso, kaad a wɔyɛ ne sɛnea wɔde di dwuma wɔ nsu no ase no betumi anya nea wɔawie no so nkɛntɛnso.
Encode ananmusifo awie kaad denam production encoder ne ahwehwɛde stripe type.
Sɔ nkrataa a wɔde magnetic akenkanfo ankasa anaa ananmusifo a wɔde ahyɛ nhyehyɛe a wɔde asi wɔn ani so no mu hwɛ.
Si stripe ne encoded track gyinabea so dua wɔ card punching akyi efisɛ alignment gyina card dimensions a wɔawie no so, ɛnyɛ mfitiase Overlay film krataa no nko.
Baabi a ISO /IEC 7811 adwumayɛ ho hia no, fa magnetic sɔhwɛ akwan a ɛfata ne gye a wogye tom no di dwuma sen sɛ wobɛhwɛ sɛ ɔkenkanfo biako betumi akenkan kaad no nkutoo anaa.
ISO /IEC 7810 di honam fam su ne nsusuwii nhyehyɛe a wɔde yɛ adansedi nkrataa ho dwuma. Ɛfa kaad a edi mũ no ho sen sɛ ɛbɛfa magnetic stripe Overlay film nkutoo ho.
ISO /IEC 7811-2 kyerɛ ahwehwɛdeɛ a ɛfa magnetic stripe identification cards a ɛnyɛ den, a magnetic stripe ne ahobammɔ Overlay film , recording technique ne coded character sets ka ho.
ISO /IEC 7811-6 kata magnetic stripe cards a ɛwɔ coercivity a ɛkorɔn so na ɛka ahwehwɛdeɛ a ɛfa stripe, ahobammɔ Overlay film ne encoding adwumayɛ ho.
ISO /IEC 7811-7 di magnetic stripe recording a ɛyɛ den kɛse, a ɛyɛ density kɛse ho dwuma ma identification-card nhyehyɛe a ɛfata.
ISO /IEC 7816 fa integrated-circuit cards a ɛwɔ nkitahodi ahorow ho. Ɛbɛyɛ nea ɛfata bere a contact chip a ɛne no hyia wɔ kaad a wɔawie no mu, na ɛnyɛ sɛ kaad no wɔ magnetic stripe kɛkɛ nti.
ISO /IEC 14443 fa proximity contactless kaad mfiridwuma ho. Ɛfa RFID /contactless hybrid cards a ɛfata ho, ɛnyɛ magnetic stripe no ankasa.
| Mfiridwuma | Sɛnea Wɔkenkan | Main Card Component |
|---|---|---|
| Magnetic Stripe a Wɔde Yɛ Nneɛma | Swipe anaa magnetic-ti akenkan | Magnetic a wɔde kyere nsɛm gu kasɛt so |
| RFID / NFC | RF nkitahodi a enni nkitahodi / tap | Chip + antenna / a wɔde ahyɛ mu |
| Nkitahodi Smart card | Electrical contacts honam fam nkitahodi ne akenkanfo | Nkitahodi chip module |
| Hybrid Kaad a Wɔde Afrafra | Ebetumi aka interface abien anaa nea ɛboro saa abom | Magstripe + chip ne/anaasɛ inlay a enni nkitahodi |
Aane. Hybrid card betumi akura magnetic stripe a ɛka ho ne RFID anaa NFC inlay, sɛ wɔayɛ kaad no adansi a edi mũ no na wɔasɔ ahwɛ ama mfiridwuma abien no nyinaa a.
Magnetic ne contactless interfaces yɛ adwuma wɔ ahofadi mu, enti ɛsɛ sɛ magnetic akenkan/encode adwumayɛ ne RF akenkan/kyerɛw adwumayɛ nyinaa di ho adanse wɔ kaad a wɔawie so.
Magnetic stripe ma data sie na ɛne magnetic akenkanfo hyia, nanso ɛnsɛ sɛ wɔka ho asɛm ara kwa sɛ ɛyɛ mfiridwuma a ɛko tia atoro anaasɛ ɛyɛ nea ahobammɔ wom wɔ cryptographic mu.
Kaad a ahobammɔ kɛse wom betumi aka stripe no ne contact anaa contactless chips, ahobammɔ personalization, holograms, laser engraving, controlled issuance ne backend authentication systems abom.
Ahɔhodan nhyehyɛe ahorow a wɔde di dwuma wɔ amanne kwan so no taa de magnetic stripes a wotumi san de coded di dwuma. Ɛsɛ sɛ LoCo anaa HiCo a wɔpaw no ne hotel encoder ne door-lock reader system a wɔde ahyɛ mu no hyia.
Magnetic stripes betumi ama ɛne asɔremma, apɔw-mu-teɛteɛ, aguadidan ne nokwaredi akenkan nhyehyɛe ahorow a wɔde ahyɛ mu no ahyia.
Ebia nhyehyɛe ahorow a wɔde di dwuma a wɔde di dwuma wɔ agyapade so no da so ara de magnetic akenkanfo bedi dwuma. Ɛsɛ sɛ nnwuma foforo kyerɛkyerɛ mu sɛ ebia magnetic, RFID , NFC anaa hybrid interface ho hia.
Magnetic stripes da so ara yɛ sikasɛm-kaad adansi ahorow bi fã ma nhyehyɛe no hyia. Ɛsɛ sɛ sikatua-kaad nhyehyɛe ahorow nso di nea ɔde mae, payment-network, chip, ahobammɔ ne personalization ahwehwɛde ahorow a ɛfa adwuma pɔtee no ho no so.
Wobetumi de tekiti a wɔde fa nneɛma a wɔde magnet ayɛ ne nkrataa adi dwuma wɔ nhyehyɛe ahorow a wɔayɛ atwa magnetic akenkanfo ho ahyia mu. Tap-in nhyehyɛe a enni nkitahodi de RFID anaa NFC mfiridwuma di dwuma na ɛnsɛ sɛ wɔka ho asɛm sɛ magnetic-stripe akenkan.
Wobetumi de magnetic stripes ahyɛ mu bere a credential system a ɛwɔ hɔ dedaw hwehwɛ no, bere a nnɛyi ID nhyehyɛe ahorow a ahobammɔ wom betumi de contact chips, contactless mfiridwuma, laser personalization ne nokwaredi nneɛma afoforo adi dwuma bio.
Ɛsɛ sɛ wɔpaw kaad Overlay film ne core-sheet coatings sɛnea offset ink nhyehyɛe ne lamination nhyehyɛe no te.
HP Indigo, toner ne dijitaal nhyehyɛe afoforo betumi ahwehwɛ sɛ wɔde coating anaa adhesion su ahorow di dwuma. Ɛsɛ sɛ wɔde krataa a wɔatintim ankasa no di dwuma wɔ lamination sɔhwɛ no mu.
Polycarbonate ne afoforo titiriw kaad adansi betumi de laser-reactive layers aka ho ama daa personalization. Ɛsɛ sɛ wɔyɛ laser tumi no ma ɛyɛ layer a ɛfata na ɛnyɛ sɛ wɔde magnetic stripe ka ho kɛkɛ na ɛbɔ.
Wobetumi de signature panels aka magnetic stripe cards ho bere a wɔadi kan akyerɛkyerɛ card nhyehyɛe ne downstream personalization ahwehwɛde ahorow mu no.
Wobetumi de aniwa ahobammɔ nneɛma ahyɛ kaad adansi a ɛfata mu, nanso ɛsɛ sɛ wɔhwehwɛ mu wɔ ɔkwan soronko so fi magnetic-stripe data ahobammɔ ho.
| Mfomso Nneɛma | a Ebetumi De Ba a Ɛsɛ sɛ Wɔhwehwɛ Mu |
|---|---|
| Ntrɛwmu a Wɔde Peeling | Tape bonding, Overlay film adansi, lamination kwan anaa efĩ a ɛwɔ soro |
| Overlay film Delamination | Coating/ink a ɛnhyia, lamination tebea a ɛnnɔɔso anaasɛ polymer stack a ɛnhyia |
| Ntrɛwmu a Wɔmfa Nyinaa Nkitahodi a ɛnteɛ | Teyp a wɔadi kan de ato hɔ, krataa a wɔde kyerɛw anaasɛ punching alignment |
| Akenkan Nsɛnkyerɛnne a Ɛyɛ Mmerewa | Magnetic nneɛma, encoding parameters, soro wear, ti alignment anaa akenkanfo nhyiam |
| Encoding a Ɛdi nkogu | Encoder coercivity nhyehyɛe a ɛnteɛ, magnetic quality, card ahoɔhare anaa track nhyehyɛe |
| Nneɛma a Wɔde Yɛ Nneɛma a Ɛwɔ Anim | Nneɛma a wɔde di dwuma, akenkanfo a wɔhyɛ, nneɛma a wɔde gu mu anaasɛ ahobammɔ a ɛnnɔɔso wɔ soro |
| Kaad a Wɔde Kyerɛw Nsɛm | Lamination hyew, nhyɛso, onwini anaa asymmetric card nhyehyɛe a ɛnteɛ |
| Mununkum anaa Frosting | Lamination interface, coatings a ɛne ne ho nhyia, mframa a wɔakyere anaasɛ nhyehyɛe tebea horow a ɛmfata |
Nneɛma a wɔde gyina so: hwɛ sɛ PVC , PC , PET , PETG anaa Overlay film abasobɔde foforo a wɔapene so.
Overlay film thickness: susuw de toto din mu gauge ne tolerance a wɔapene so no ho.
Krataa anaa reel nsusuwii: hwɛ kɛse, ne tɛtrɛtɛ ne sɛnea wɔyɛ no.
Magnetic coercivity: hwɛ sɛ LoCo, HiCo anaa magnetic nkyerɛkyerɛmu foforo a wɔahyɛ no yɛ nokware.
Stripe trɛw: hwɛ sɛ 8mm, 12.7mm anaa amanne trɛw.
Stripe gyinabea: hwehwɛ transverse gyinabea ne dinkyerɛw.
Ntrɛwmu hwɛbea: hwɛ nsensanee, efĩ, anoano sintɔ ne kɔla a ɛyɛ pɛpɛɛpɛ.
Tape adhesion: hwɛ sɛ stripe bonding to Overlay film no yɛ nokware.
Overlay film coating: si so dua sɛ wɔakata so anaasɛ wɔankata so.
Lamination bond: hwɛ peel anaa delamination adwumayɛ.
Kaad a ɛyɛ tratraa: hwɛ kaad a wɔawie no bere a wɔayɛ no lamination ne cooling akyi.
Magnetic encoding: verify data betumi encode ne production encoder.
Magnetic akenkan: sɔhwɛ ananmusifo awie nkrataa wɔ akenkanfo a wɔde wɔn ani asi so so.
Track beae: hwɛ sɛ ɛne card-system ahwehwɛde ahorow a ɛfata hyia.
Magnetic sɛnkyerɛnne adwumayɛ: yɛ ISO /IEC 7811 sɔhwɛ a ɛfata wɔ baabi a wɔakyerɛ.
Abrasion: susuw magnetic stripe wear ho ma card nkwa nna a wɔahyɛ da ayɛ.
Printing compatibility: laminate tia ankasa tintim core nneɛma.
RFID / NFC : sɔ contactless dwumadie hwɛ wɔ baabi a wɔde di dwuma wɔ hybrid card mu.
Contact chip: hwɛ sɛ chip no yɛ adwuma wɔ baabi a ɛfata.
Traceability: hwɛ batch ne inspection identification ma repeat orders.
Kyerɛ sɛ ebia kaad no yɛ ahɔhodan, asɔremma, nokwaredi, kwan a wɔfa so kɔ hɔ, sikasɛm, akwantu, aban ID anaa nhyehyɛe foforo.
Kyerɛ PVC , PC , PET , PETG anaa ade foforo a egyina kaad nkwa, lamination, personalization ne downstream dwumadie so.
Paw magnetic grade sɛnea encoder/reader nhyehyɛe a wɔde ahyɛ mu, kaad nkwa nna a wɔhwɛ kwan ne resistance-to-erasure ahwehwɛde te.
Kyerɛ 12.7mm, 8mm anaa amanne kwan so trɛw foforo a egyina kaad nhyehyɛe ne track ahwehwɛde ahorow so.
Fa mfiridwuma ho mfonini a ɛkyerɛ beae a nsensanee wɔ bere a wɔde toto kaad ano a wɔawie ne nneɛma afoforo ho ma.
Overlay film ɛsɛ sɛ ne kɛse fata kaad stack a edi mũ no sɛnea ɛbɛyɛ a kaad a etwa to no bedu ne nyinaa gauge a wɔhwehwɛ no ho.
Fa coating no hyia core ade, printing ink ne lamination mfiri.
Fa krataa no nsusuwii anaa reel trɛw, core ne roll ahwehwɛde ahorow a egyina nnwinnade a wɔde yɛ nneɛma so ma.
Kyerɛ RFID , NFC , contact chip, barcode, QR code, signature panel, hologram, laser personalization ne ade foforo biara a wɔhwehwɛ.
Pene magnetic encoding, akenkanfo a ɛne ne ho hyia, lamination bonding, stripe beae, card flatness ne ɛlɛtrɔnik dwumadi afoforo nyinaa so bere a wɔayɛ card a edi mũ no akyi.
Akwankyerɛ: ahɔhodan, asɔremma, kwan a wɔfa so kɔ hɔ, ID, sikasɛm, akwantu, nokwaredi anaa kaad foforo.
Overlay film nneɛma: PVC , PC , PET , PETG anaa adansi foforo.
Overlay film thickness: din mu duru ne abodwokyɛre.
Magnetic type: LoCo, HiCo anaasɛ grade foforo a wɔhwehwɛ.
Nhyɛsoɔ: kyerɛ botaeɛ aguadi Oe grade wɔ baabi a ɛhia.
Stripe trɛw: 8mm, 12.7mm anaa amanne.
Stripe kɔla: tuntum, bruu, sika kɔkɔɔ, dwetɛ anaa amanne.
Stripe gyinabea: ma dimensioned mfonini.
Format: krataa anaa reel.
Krataa kɛse: A4, A3, A3 + anaa amanne.
Reel specification: trɛw, core ne roll tenten wɔ baabi a ɛfata.
Nneɛma a wɔde kata so: nea wɔde akata so anaasɛ wɔmfa nkata so Overlay film .
Ntintim nhyehyɛe: offset, HP Indigo, toner, UV anaa nhyehyɛe foforo.
Core material: ma printed/core-sheet nneɛma ne ne kɛse.
Lamination nhyehyɛe: ma ɔhyew, nhyɛso ne kyinhyia wɔ baabi a wɔde asi hɔ dedaw.
Finished card thickness: kyerɛkyerɛ ahwehwɛde nyinaa kaad gauge.
Magnetic tracks: kyerɛ encoding ne akenkanfo ahwehwɛde.
RFID / NFC : ma chip/inlay nsɛm ma hybrid kaad.
Contact chip: kyerɛ module ahwehwɛde wɔ baabi a ɛfata.
Personalization: barcode, QR, laser engraving, embossing anaa data a ɛsakra.
Sɔhwɛ gyinapɛn: kyerɛ ISO /IEC 7811 anaa adetɔfoɔ pɔtee gyinapɛn a ɛfata.
Dodow: nhwɛsode, sɔhwɛ ne aguadi mu nneɛma dodow.
Destination: fa ɔman ne po so hyɛn ahwehwɛde ahorow ma.
Ɛsɛ sɛ wɔde kaad a wɔasisi no nyinaa na ɛsɔ nea ɛbɛkɔ so atra hɔ daa no hwɛ sen sɛ wɔbɛka substrate biako ho asɛm sɛ ɛkorɔn sen nneɛma a atwa yɛn ho ahyia wɔ amansan nyinaa mu.
Magnetic card betumi ayɛ polymer layers, magnetic tape, coatings, inks, adhesives, signature panels, chips, antennas ne nneɛma afoforo a ɛka nkwa awiei dwumadie.
PET ankasa betumi akɔhyɛn nhyehyɛe a ɛfata a wɔde di dwuma bio mu, nanso magnetic anaa smart card a wɔde nneɛma pii ayɛ a wɔawie no betumi ahwehwɛ sɛ wɔboaboa ano na wɔyɛ ho adwuma titiriw.
Kaad a ɛtra hɔ kyɛ a ɛko tia delamination ntɛm, stripe wear ne replacement betumi atew nea wɔyɛ no mpɛn pii so, nanso ɛsɛ sɛ nneɛma a atwa yɛn ho ahyia ho nsɛm da so ara gyina ade ankasa ne nkwa awiei nhyehyɛe so.
Wallis de Overlay film -nneɛma ahodoɔ pii ma sɛdeɛ ɛbɛyɛ a wɔn a wɔyɛ kaad no bɛtumi de sini no ahyia wɔn kaad nipadua, lamination nhyehyɛeɛ ne ɔsom nkwa nna a wɔhwehwɛ.
Wobetumi apaw magnetic grades sɛnea akenkanfo/encoder nhyehyɛe, kaad a wɔabɔ wɔn tirim sɛ wɔde bedi dwuma ne ahwehwɛde a ɛne sɛ wɔbɛko atia sɛ wɔbɛpopa no te.
Wobetumi asusuw nsensanee trɛw, kɔla ne beae a ɛwɔ ho ama kaad-ayɛ nhyehyɛe a wɔayɛ no sɛnea wɔpɛ.
Wɔn a wɔyɛ kaad no betumi asusuw coating nhyehyɛe ahorow ho sɛnea wɔn core-sheet nneɛma, ink ne lamination mfiri te.
Wobetumi de magnetic stripe Overlay film ahyɛ kaad adansi a ɛsan nso de RFID / NFC inlays, contact chips ne personalization features afoforo di dwuma wɔ baabi a wɔagye nhyehyɛe a edi mũ no atom.
Nhwɛso nhwehwɛmu ma adetɔfo tumi hwɛ sɛ bonding, magnetic encoding, akenkanfo nhyiam, kaad a wɔawie no kɛse ne sɛnea ɛte ansa na wɔayɛ aguadi.
Ɛyɛ Overlay film sini a magnetic tape a wɔadi kan de asi hɔ ama wɔaka abom ayɛ laminated card. Ɛka kaad Overlay film ne magnetic recording stripe a magnetic card a wɔawie no hwehwɛ no bom.
Magnetic tape ne magnetic ade a wɔde kyere nsɛm gu kasɛt so no ankasa. Magnetic stripe Overlay film film taa kyerɛ Overlay film ade a wɔde magnetic tape no asi so dedaw ama card lamination.
LoCo kyerɛ sɛ nhyɛso a ɛba fam. Aguadi mu grade a wɔtaa de di dwuma no bɛyɛ 300 Oe na ɛhwehwɛ magnetic field a ɛba fam ma encoding sen HiCo.
HiCo kyerɛ sɛ wɔhyɛ obi kɛse. Nneɛma a wɔtaa de di gua no bi ne bɛyɛ 2750 Oe ne 4000 Oe na ɛma ahoɔden a ɛko tia magnetic popa a ɛba wɔ akwanhyia mu no kɛse sen LoCo.
Dabi ISO /IEC 7811-2 kyerɛkyerɛ adwumayɛ ahwehwɛde ahorow mu ma magnetic stripe cards a ɛnyɛ den, nanso wɔankyerɛ nhyɛso ankasa sɛ Oe bo biako a ɛyɛ ahyɛde.
No. 2750 Oe yɛ HiCo grade a wɔtaa de di gua, nanso ISO /IEC 7811-6 twe adwene si magnetic adwumayɛ a wɔawie-kaad so na ɛnkyerɛ amansan nhyɛso botae biako.
HiCo tumi gyina magnetic popa a wɔpopa wɔ akwanhyia mu ano kɛse, nanso ɛnsɛ sɛ wɔde eyi frafra cryptographic ahobammɔ anaasɛ tumi a ɛko tia atoro.
Mpɛn pii no, wɔde magnetic stripe card ahorow no twe anaasɛ wɔde twa magnetic akenkanfo ti ho. Tapping ne RFID / NFC mfiridwuma a enni nkitahodi wɔ abusuabɔ.
Aane. Hybrid cards tumi de magnetic stripe ne NFC anaa contactless inlay foforo bom bere a wɔayɛ mfiridwuma abien no nyinaa wɔ card no mu na wɔasɔ ahwɛ wɔ ahofadi mu.
Aane. Magnetic stripe ne contact-chip interfaces betumi atra faako wɔ card biako mu bere a card architecture ne personalization nhyehyɛe no boa mfiridwuma abien no nyinaa.
12.7mm yɛ a ɛtaa yɛ trɛw magnetic-stripe dimension. Wobetumi nso de nsensanee a ɛyɛ teateaa anaasɛ wɔayɛ no sɛnea wɔpɛ nso adi dwuma a egyina kaad no ne encoding specification so.
Ɛsɛ sɛ stripe ne encoded tracks no ne magnetic ti a ɛwɔ akenkanfo no mu no hyia yiye. Sɛ wɔde si baabi a ɛnteɛ a, ebetumi ama akenkan akɔ so bere ne bere mu anaasɛ entumi nyɛ yiye.
Aane. Wobetumi aka sheet formats te sɛ A4, A3, A3+ ne customized layouts ho asɛm sɛnea production nhyehyɛe no te.
Wobetumi asusuw reel anaa roll formats ho ama nsakrae a ɛkɔ so ne card-production nhyehyɛe ahorow a wɔde wɔn ankasa yɛ.
Coated Overlay film de bonding layer a wɔayɛ sɛ ɛbɛboa adhesion bere a card-body lamination no ka ho.
Dabi PET ne PETG yɛ polyester nneɛma a ɛfa ho nanso ɛsono sɛnea wɔyɛ ne sɛnea wɔyɛ no. Si nneɛma a wɔhwehwɛ no so dua ansa na woakra.
Polycarbonate yɛ kɛse de di dwuma wɔ durable multilayer credentials efisɛ compatible adansi betumi aboa den lamination, tenten som nkwa ne laser personalization.
Overlay film anaa kaad nhyehyeɛ titire betumi ayɛ laser-reactive additives anaa layers. Magnetic stripe no ankasa mma laser-personalization tumi.
Wobetumi anya magnetic tape kɔla ahorow a wɔayɛ no sɛnea wɔpɛ ama nneɛma a wɔapaw. Ɛsɛ sɛ stripe no da so ara di magnetic encoding ne akenkanfo adwumayɛ a wɔhwehwɛ no ho dwuma.
Ɛnyɛ ɛno nkutoo. Magnetic stripes ma data a wɔde asie a mfiri betumi akenkan, bere a adansedi nhyehyɛe a ahobammɔ wom betumi ahwehwɛ chips, encryption, controlled issue, laser personalization ne authentication features foforo.
ISO /IEC 7816 fa nkitahodi integrated-circuit cards ho. Ɛfata bere a kaad a wɔawie no de contact chip a ɛne no hyia ka ho, ɛnyɛ magnetic stripe Overlay film nkutoo.
ISO /IEC 14443 fa proximity contactless kaad mfiridwuma ho. Ɛfa baabi a hybrid card a etwa to no nso kura contactless chip ne antenna nhyehyɛe a ɛfata no nkutoo.
Sɔ nneɛma a ɛba no nyinaa hwɛ wɔ baabi a ɛfata ne kaad a etwa to a wɔayɛ no laminated, punched ne personalized card no. Final-card sɔhwɛ ho hia titiriw efisɛ nneɛma a wɔyɛ no betumi aka stripe beae ne adwumayɛ.
Aane. Ɛsɛ sɛ wɔde akenkanfo ne encoder mfiri ankasa anaa nea wɔapene so sɔ ananmusifo production cards hwɛ bere biara a nhyehyɛe no hyia ho hia.
Wallis betumi aka Overlay film thickness a wɔayɛ no sɛnea wɔpɛ, card stack, coating ne production ahwehwɛde ahorow ho asɛm.
Fa kaad a wɔde di dwuma, Overlay film nneɛma, ne kɛse, LoCo anaa HiCo ahwehwɛde, coercivity grade, stripe trɛw ne gyinabea, krataa anaa reel format, tintim nhyehyɛe, lamination tebea, kaad a wɔawie, ɛlɛtrɔnik nneɛma, dodow ne baabi a wɔrekɔ ma.
Sɛ wopaw magnetic stripe film a wode bɛyɛ smart-card a, ɛhwehwɛ pii sen sɛ wobɛpaw PVC , PC anaa PET . Ɛsɛ sɛ magnetic grade, stripe trɛw, stripe beae, Overlay film coating, printing process ne lamination tebea nyinaa bom yɛ adwuma wɔ card a wɔawie no mu.
Ɛsɛ sɛ adetɔfoɔ a wɔyɛ adwumaden hwehwɛ nneɛma a ɛne ne ho hyia, Overlay film ne kɛseɛ, nhyɛsoɔ, teyp a ɛbata ho, lamination bond, stripe gyinabea, encoding adwumayɛ, akenkanfoɔ a ɛne ne ho hyia, abrasion resistance ne ISO /IEC 7811 gyinapɛn a ɛfata sɛ nhyehyɛeɛ baako a ɛdi mũ.
Send Wallis wo card stack, magnetic stripe specification, reader/encoder ahwehwɛdeɛ, production process ne volume a wɔhwɛ kwan sɛ wɔmfa nsusu magnetic stripe a ɛfata Overlay film ansa na wɔayɛ no kɛseɛ.
