Views: 0 Author: Site Editor Bɔli waati: 2025-11-17 Bɔyɔrɔ: Yɔrɔ
San 2025, kartiw ɲinini bɛ ka caya ka taa a fɛ, karti minnu tɛ ɲɔgɔn sɔrɔ, taamasiyɛn hakilitigiw, dondaw kɔlɔsili ID, bolifɛn kartiw, wariko sarali kartiw, ani IoT minɛnw ɲinini bɛ ka caya ka taa a fɛ. Nin fɛn ninnu bɛɛ cɛmancɛ la, jusigilan kɔrɔba dɔ bɛ yen:
inlay sheet + RFID/NFC chip faralen ɲɔgɔn kan.
A inlay sheet min ka ɲi kosɛbɛ, o bɛ RF baarakɛcogo sabatilen , sabati bonding strength , precise antenna alignment , ani ka baarakɛ waati jan . karti laban O waati kelen na, puce ɲuman sugandili bɛ nɔ bila kalan yɔrɔjan , lakanani hakɛ , bɛnkan , sirili la , ani musaka bɛɛ lajɛlen na.
Nin TOP gafe in bɛ fɛn o fɛn ɲɛfɔ karti dilannikɛlaw, fɛnfeerelaw ani feerekɛlaw ka kan ka min dɔn:
Inlay sheets suguyaw
RFID/NFC puce suguya minnu bɛ fɔ kosɛbɛ
Fɛnɲɛnɛmaw jɔcogo & u dilanni fɛɛrɛw
Frequency bands (LF/HF/UHF) sugandili .
Aplikasi kɛcogo minnu bɛ kɛ
Inlays sugandicogo poroze suguya wɛrɛw kama
Fɛn dilanbagaw ka ladilikanw
Inlay Sheet ye fɛn ye min bɛ kɛ karti ni labeli dilanni na. bɛ a kɔnɔ Antɛni + puce module , min bɛ lamini PET, PVC, walima substrat wɛrɛw layiniw cɛ.
1. RFID/NFC Puce Module (Puce Module) ye
Puce ye karti ka 'brain' ye — min bɛ kodɔn, hakilijagabɔ ani kumaɲɔgɔnya ɲɛnabɔ.
2. Antɛni (Kupu/Aluminiyɔmu/Warijɛ) .
Dilancogo danfaralenw (bobine, etched, imprimés) bɛ nɔ bila taamasiyɛn sabatili la ani kalan janya la.
3. Substrat (Sɔrɔdasi) Fɛn min bɛ kɛ
SOKƆBAGAN MISƐNI
PVC ye
PETG ye
Polikarbonati (PC) .
Wallis-produced inlays ka teli ka baara kɛ ni PET fanga caman ye walasa ka muɲuli ɲuman sɔrɔ.
4. Adhesif & Prelam jɔcogo
A bɛ kɛ walasa ka jɛɲɔgɔnya barikama sabati lamini waati la 125–150°C la.
Fɛrɛnkan ɲuman sugandili nafa ka bon walasa ka poroze ka ɲininiw bɛn ɲɔgɔn ma.
Fɛn minnu bɛ a la: A bɛ sabati, ji walima nɛgɛ tɛ a minɛ.
Baarakɛcogo: Sɔrɔcogo kɔlɔsili, baganw ka ID.
A bɛ kɛ ka caya NFC kartiw, bolifɛnw, tɔndenw ka kartiw ani e-pass kama.
Yɔrɔjan dɔnni fo ka se 10m+ ma.
A ka ca ni fɛnw ladonni ye, fɛnmarayɔrɔw nɔfɛtaama, bolifɛnw dɔnni, feerelikɛlaw ka fɛnw jatebɔ.
| Puce Model | Frequency | Memory Capacity | Lakanali Nivo | Kalan yɔrɔjan | Typical Applications | Key Features |
|---|---|---|---|---|---|---|
| EM4100 / EM4200 ye | LF 125kHz ye | 64 bitiki (kalan dɔrɔn) . | Fɛ́gɛn | 2–10 cm (santimɛtɛrɛ 2–10). | Sɔrɔcogo kɔlɔsili, ID basigilen | Musow ka musaka ka dɔgɔ, baarakɛcogo sabatilen |
| TK4100 ye | LF 125kHz ye | 64 bitiki (kalan dɔrɔn) . | Fɛ́gɛn | 2–10 cm (santimɛtɛrɛ 2–10). | Da doncogo, jamalajɛ | EM4100-compatible, baara bɛ kɛ ni a ye kosɛbɛ |
| T5577 ye | LF 125kHz ye | 363 bitiki (a bɛ se ka sɛbɛn kokura) . | Hakɛ | 2–10 cm (santimɛtɛrɛ 2–10). | Lotɛli kartiw, dondaw | A bɛ se ka ladilan kosɛbɛ, a bɛ se ka kɛ ni clone ye |
| MIFARE Classique 1K (S50) Bamako, Mali. | HF 13,56MHz ye | 1 KB ye | Hakɛ | 2–10 cm (santimɛtɛrɛ 2–10). | Metro kartiw, tɔndenw, farikoloɲɛnajɛyɔrɔw | HF puce min bɛ kɛ ka caya |
| MIFARE Klasik 4K ye | HF 13,56MHz ye | 4 KB ye | Hakɛ | 2–10 cm (santimɛtɛrɛ 2–10). | Foroba bolifɛnw, minisiriso ka kartiw | Hakilila-jɔ-seko ka bon |
| MIFARE Ultralight / EV1 ye | HF 13,56MHz ye | 48–128 bayt (bayiti) | Hakɛ | 2–10 cm (santimɛtɛrɛ 2–10). | Ticketing, event tɛmɛnenw | A musaka ka dɔgɔ, a bɛ nkalontigɛ kɛlɛ |
| NXP NTAG213 ye | HF 13,56MHz ye | 144 ye bayt ye | Hakɛ | 2–10 cm (santimɛtɛrɛ 2–10). | NFC ka fɛn dilannenw taamasiyɛnw, nkalontigɛ kɛlɛli | Smartphone-combatible, scan teliya |
| NXP NTAG215 ye | HF 13,56MHz ye | 504 ye bayt ye | Hakɛ | 2–10 cm (santimɛtɛrɛ 2–10). | Tulonkɛfɛnw-ka-ɲɛnamaya, branding | Hakilila ka bon, a sabatilen don |
| NXP NTAG216 ye | HF 13,56MHz ye | 888 ye bayt ye | Hakɛ | 2–10 cm (santimɛtɛrɛ 2–10). | Marketing NFC tags, dantigɛli | NTAG hakilijagabɔ hakɛ min ka fisa |
| MIFARE DESFire EV1/EV2/EV3 ye | HF 13,56MHz ye | 2–8 KB ye | Sanfɛ (AES sirili) . | 2–10 cm (santimɛtɛrɛ 2–10). | Banki, bolifɛnw, danyɔrɔ lakananen | Lakanali min bɛ kɛ baarakɛyɔrɔ la |
| IKODE SLIX / SLIX2 ye | HF 13,56MHz ye | 1024 ye bitikiw ye | Cɛmancɛ–Kɔrɔlen | 2–10 cm (santimɛtɛrɛ 2–10). | Kitabumarasow, feerelikɛlaw ka logistiki | Kalan kɛcogo ɲumanba |
| Impinj Monza R6/R6P/R7 ye baara kɛ ni a ye | UHF 860–960MHz ye | 96–128 bitikiw EPC | Hakɛ | Fo ka se mɛtɛrɛ 10 ma | Depo, fɛnw dilanyɔrɔ, feerekɛyɔrɔ | Kalan min bɛ taa yɔrɔ jan kosɛbɛ |
| NXP UCODE 7 / 8 / 9. Bamako, Mali | UHF 860–960MHz ye | 96–128 bitikiw EPC | Cɛmancɛ–Kɔrɔlen | Fo ka se mɛtɛrɛ 10 ma | Inventory tracking, bolifɛn ID | Anti-interférence barikama |
Metro kartiw
Bus kartiw
Airport doncogo biletiw
Biro ka kartiw
Lotɛli so kartiw
Parking systems (Jɛkulu jɔyɔrɔw).
Karti minnu bɛ ni ɲɔgɔndan fila ye
E-payment kartiw
Sonyali kɛlɛli taamasiyɛnw
UHF ka fɛnmarayɔrɔ sɛbɛnw
Fɛn dilannenw tiɲɛni taamasiyɛnw
Tag minnu bɛ se ka don
NFC ka klaviyetiw
Marka interactive (maraka) min bɛ kɛ ni mɔgɔw ye
✔ Antɛni sirili ni ultrasonic ye min bɛ kɛ ka ɲɛ kosɛbɛ
✔ Bɛn dafalen ni NXP, EM, Impinj, Alien pucew ye
✔ PET/PC substrat min bɛ mɛn
✔ 100% tɛmɛsira RF sabatili sɛgɛsɛgɛli la
✔ A bɛ OEM/ODM ladamuni dɛmɛ
✔ Karti dilanni masinw kulu dafalen (lamination masinw, punch masinw, mag-strip applicators, overlays, a ɲɔgɔnnaw)
Puce sugandili
Antɛni dilanni
Sɛbɛn hakɛ (A4 / 2×5 / 3×8 labɛncogo) .
Prelam ka bonya
HF/LF/UHF ka jɛɲɔgɔnya
Ni i ye kan cogo ɲuman na, o de inlay sheet + chip faralen ɲɔgɔn bɛ RFID/NFC karti hakilitigi o karti hakilitigi baara laban dantigɛ. K’a ta LF la ka taa UHF la, ka bɔ NTAG la ka taa bila DESFire la, fura ɲuman sugandili bɛ sabatili, lakana, ani muɲuli kuntaalajan sabati.
Shanghai Wallis Technology bɛ inlay sheets premium di, OEM services, ani card manufacturing solutions dafalenw , ka baara kɛcogo ɲuman sabati diɲɛ kiliyanw ye.
NTAG213 ni DESFire EV3 bɛ ɲɛmɔgɔya la sisan NFC ni baarakɛcogo lakananenw na.
Ɔwɔ, Wallis bɛ A4, 2×5, 3×7, 3×8, ani layidu dafalenw dɛmɛ.
A ka ca a la san 10 bɛ kɛ baarakɛcogo la min bɛ kɛ cogo la.
PET barika ka bon ani a tɛ se ka funteni kɛlɛ; PVC ye sariya ye, wa a musaka ka dɔgɔ.
DESFire EV1/EV2/EV3, MIFARE Plus, ADN UCODE, a ɲɔgɔnnaw.
