Ra'ayoyi: 0 Mawallafi: Lokacin Buga Editan Yanar Gizo: 2025-11-17 Asalin: Shafin
A cikin 2025, buƙatun katunan da ba a haɗa su ba, alamun wayo, ID masu sarrafawa, katunan sufuri, katunan biyan kuɗi, da na'urorin IoT na ci gaba da haɓaka. A tsakiyar duk waɗannan samfuran ya ta'allaka ne mai mahimmanci tushe:
takardar inlay + RFID/NFC guntu hade.
Takardar inlay mai inganci tana tabbatar da ingantaccen aikin RF , babban ƙarfin haɗin kai , daidai daidaitattun eriya , da tsawon rayuwar katin ƙarshe. A halin yanzu, zabar guntu mai kyau yana rinjayar matakin matakin tsaro na nisa , da , , , ɓoye ƙimar gabaɗaya.
Wannan jagorar TOP yana bayanin duk abin da masu kera katin, dillalai, da masu rarrabawa ke buƙatar sani:
Nau'in zanen gadon inlay
Shahararrun nau'ikan guntu na RFID/NFC
Tsarin kayan abu & hanyoyin samarwa
Zaɓin makada mai mitar (LF/HF/UHF)
Yanayin aikace-aikace
Yadda za a zaɓi inlays don ayyuka daban-daban
Shawarwari na masu kaya
Takardun Inlay samfurin da aka gama shi ne wanda aka yi amfani da shi wajen kera katin da alamar. Ya ƙunshi eriya + guntu module , laminated tsakanin yadudduka na PET, PVC, ko wasu substrates.
1. RFID/NFC Chip Module
Guntu ita ce 'kwakwalwa' na katin - alhakin ɓoyewa, ƙwaƙwalwa, da sadarwa.
2. Eriya (Copper/Aluminum/Azurfa)
Zane-zane daban-daban (nada, etched, bugu) kai tsaye suna tasiri ga kwanciyar hankali da nisan karatu.
3. Substrate Material
PET
PVC
PETG
Polycarbonate (PC)
Inlays wanda Wallis ke samarwa yakan yi amfani da PET mai ƙarfi don ɗorewa mai ƙima.
4. Adhesive & Tsarin Prelam
Ana amfani dashi don tabbatar da haɗin gwiwa mai ƙarfi a lokacin lamination a 125-150 ° C.
Zaɓin mitar daidai yana da mahimmanci don dacewa da buƙatun aikin.
Siffofin: Barga, ruwa ko ƙarfe bai shafe su ba.
Amfani: Ikon shiga, ID na dabba.
Mafi yawan amfani da katunan NFC, tikitin sufuri, katunan membobinsu, da e-passs.
Gano mai tsayi har zuwa 10m+.
Na kowa a cikin kayan aiki, bin diddigin sito, sanin abin hawa, kiyayyar dillali.
| Chip Model | Mitar | Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar | Ƙwaƙwalwar Ƙwararren Ƙwararren Ƙwararren | Ƙwararren Ƙwararren Ƙwararren Ƙwararren | Ƙwararren Ƙwararren Ƙwararren | Ƙwararru |
|---|---|---|---|---|---|---|
| Saukewa: EM4100 | LF 125kHz | 64 bits (karanta-kawai) | Ƙananan | 2-10 cm | Ikon shiga, ID na asali | Low cost, barga yi |
| TK4100 | LF 125kHz | 64 bits (karanta-kawai) | Ƙananan | 2-10 cm | Shigar kofa, halarta | EM4100-mai jituwa, yadu amfani |
| T5577 | LF 125kHz | 363 bits (sake rubutawa) | Matsakaici | 2-10 cm | Katunan otal, tsarin shiga | Sosai wanda za'a iya daidaita shi, mai dacewa da clone |
| MIFARE Classic 1K (S50) | HF 13.56MHz | 1 KB | Matsakaici | 2-10 cm | Katunan Metro, membobinsu, gyms | Mafi yawan amfani da guntu HF |
| MIFARE Classic 4K | HF 13.56MHz | 4 KB | Matsakaici | 2-10 cm | Harkokin sufurin jama'a, katunan birni | Girman ƙarfin ƙwaƙwalwar ajiya |
| MIFARE Ultralight / EV1 | HF 13.56MHz | 48-128 bytes | Matsakaici | 2-10 cm | Tikitin tikiti, taron ya wuce | Mai tsada, anti-jabu |
| NXP NTAG213 | HF 13.56MHz | 144 bytes | Matsakaici | 2-10 cm | Alamomin samfurin NFC, anti-jabu | Wayar hannu mai jituwa, saurin dubawa |
| NXP NTAG215 | HF 13.56MHz | 504 bytes | Matsakaici | 2-10 cm | Toys-to-ray, alama | Babban ƙwaƙwalwar ajiya, barga |
| NXP NTAG216 | HF 13.56MHz | 888 bytes | Matsakaici | 2-10 cm | Tallace-tallacen NFC tags, tabbatarwa | Mafi kyawun girman ƙwaƙwalwar NTAG |
| MIFARE DESFire EV1/EV2/EV3 | HF 13.56MHz | 2-8 KB | Babban (rufe AES) | 2-10 cm | Banki, sufuri, amintaccen ainihi | Tsaro na darajar kasuwanci |
| ICODE SLIX / SLIX2 | HF 13.56MHz | 1024 bit | Matsakaici-Maɗaukaki | 2-10 cm | Dakunan karatu, kayan aikin siyarwa | Madalla da hankali karatu |
| Impinj Monza R6/R6P/R7 | UHF 860-960MHz | 96-128 bit EPC | Matsakaici | Har zuwa mita 10 | Warehouse, sarkar kaya, dillali | Karatu mai tsayi sosai |
| NXP UCODE 7/8/9 | UHF 860-960MHz | 96-128 bit EPC | Matsakaici-Maɗaukaki | Har zuwa mita 10 | Bibiyar kaya, ID na abin hawa | Karfin tsangwama |
Katunan metro
Katunan bas
Tikitin shiga filin jirgin sama
Katunan ofis
Katunan ɗakin otal
Tsarin yin kiliya
Katunan mu'amala da juna biyu
Katunan biyan kuɗi na e-e
Anti-sata tags
Alamomin sito na UHF
Takaddun shaida na samfur
Alamomin sawa
NFC keyfobs
Alamar hulɗa
✔ High-daidaici ultrasonic eriya bonding
✔ Cikakken dacewa tare da NXP, EM, Impinj, Alien kwakwalwan kwamfuta
✔ M PET / PC substrate
✔ Ƙimar wucewa 100% a gwajin kwanciyar hankali na RF
✔ Yana goyan bayan gyaran OEM / ODM
✔ Cikakken saitin injunan samar da kati (injunan lamination, injin bugu, masu amfani da magi-strip, overlays, da sauransu)
Zaɓin guntu
Tsarin eriya
Girman takardar (A4 / 2×5 / 3×8 shimfidu)
Prelam kauri
Haɗin HF/LF/UHF
Zaɓin madaidaicin takardar inlay + haɗin guntu yana ƙayyade aikin ƙarshe na kowane katin wayo na RFID/NFC. Daga LF zuwa UHF, daga NTAG zuwa DESFire, zaɓin ingantaccen bayani yana tabbatar da kwanciyar hankali, tsaro, da dorewa na dogon lokaci..
Fasahar Shanghai Wallis tana ba da takaddun inlay na ƙima, sabis na OEM, da cikakkun hanyoyin samar da katin , yana tabbatar da babban aiki ga abokan cinikin duniya.
NTAG213 da DESFire EV3 a halin yanzu suna jagorantar NFC da amintattun aikace-aikace.
Ee, Wallis yana goyan bayan A4, 2×5, 3×7, 3×8, da cikakken shimfidu na al'ada.
Yawanci shekaru 10 a ƙarƙashin amfani na yau da kullun.
PET ya fi ƙarfi kuma yana jure zafi; PVC misali ne kuma mai tsada.
DESFire EV1/EV2/EV3, MIFARE Plus, UCODE DNA, da dai sauransu.
