Views: 0 Author: Site Editor Bɔli waati: 2025-11-10 Bɔyɔrɔ: Yɔrɔ
ɲuman sugandili Fura kurukuruw foroko filimu tɛ sugandili dɔrɔn ye PVC , PVDC, EVOH ani LDPE cɛ. O polimɛriw bɛ baara suguya wɛrɛw kɛ furaw foroko kɔnɔ, wa u bɛ to ka fara ɲɔgɔn kan walasa ka balansi wajibiyalen sɔrɔ funteni sɛnɛcogo, oksizɛni barika, ji lakanani, sigili baarakɛcogo, jɛya ani sɛnɛcogo ɲuman na.
Kurukuruw foroko kɔrɔlen kɔnɔ, PVC gɛlɛn bɛ se ka kɛ i n’a fɔ thermoformable forming web. PVDC bɛ se ka da PVC kan walima ka don fɛn caman na walasa ka ji ni oksizɛni barika ɲɛ. EVOH bɛ kɛ fɔlɔ i n’a fɔ oksizɛni ni gazi barikalan caman bɛ sɔrɔ pake caman kɔnɔ, ka sɔrɔ LDPE bɛ se ka fɛn caman sɛgɛsɛgɛ, ka ji lakana ani ka funteni datugu.
Fura dilannikɛlaw ni pakew tigɛlikɛlaw fɛ, o la, fɛn bɛnnen ka kan ka sugandi ka kɛɲɛ ni fura sabatili kunnafoniw ye, oksizɛni tali hakɛ laɲinilen (OTR) , ji lafiɲɛbɔ hakɛ (WVTR) , kɔnɔna jateminɛcogo, sigicogo, a maracogo, a maracogo laɲini ani a taayɔrɔ-sɔgɔli wajibiyalenw.
| Materiel | Primaire Packaging Role | Fanga kunba | Danyɔrɔ nafama |
|---|---|---|---|
| PVC | Web formation thermoformable rigide | Formability, clarity, rigidity ani musaka dɔgɔyali | Standard PVC bɛ se ka kɛ a tɛ ji walima oksizɛni barika bɛrɛ di furakɛlicogo sɛgɛsɛgɛlenw ma |
| PVDC (PVDC) ye | Barrière coating walima layer, min bɛ tali kɛ PVC -based films la tuma caman na | Ji-dafalen ni oksizɛni barika ɲɛnabɔlen | Barika bɛ bɔ finimugu girinya la, a jɔcogo, a dilanni ani a sɛgɛsɛgɛli cogoyaw |
| EVOH ye | Gazi-bariyɛri kɔnɔna-yɔrɔ caman-caman-yɔrɔw la | Oksizɛni ni gazi barikalan ɲumanba | Barika baara bɛ kɛ ni nɛnɛ ye, o la, a ka c’a la, EVOH bɛ lakana ni lamini layɛrɛw ye |
| LDPE (LDPE) ye | Sigilan, fɛn min bɛ se ka wuli walima min bɛ a tanga fɛn caman ma | Funteni datuguli, a bɛ se ka wuli ka bɔ a nɔ na ani a bɛ ji lakana | A ka ca a la, a tɛ sugandi i n’a fɔ furakisɛ gɛlɛn gɛlɛn min bɛ kɛ a yɛrɛ ma, o min bɛ kɛ ka web dilan |
Furakɛcogo gɛlɛn PVC filimu ye thermoformable forming webs sigilenw dɔ ye minnu bɛ kɛ ka furakisɛw ni furakisɛw foroko kɛ. A dilanni senfɛ, PVC web bɛ sumaya ka kɛ dingɛw ye, ka fa furakɛlifɛn na, ka sɔrɔ ka datugu ni datugulan ye min bɛ bɛn a ma.
A nafa fɔlɔw ye thermoforming kɔrɔsilen ye, ɲɛnayeli jɛlen, dimensions stability ani relativement economical processing . Transparent PVC fana bɛ a to furakisɛw walima furakisɛw ka to ka ye walasa ka furaw dɔn ani ka u sɛgɛsɛgɛ.
Termoforming baara ɲuman kɛli blister cavities kɔrɔlenw na
Fɛn dilannenw yecogo ka bon ni baara kɛra ni kalasi jɛlenw ye
Rigidité ɲuman ani dimension stabilité
A sigilen don kosɛbɛ furakɛli blister minɛnw kan
A bɛ sɔrɔ a bonya, a bonya, a kulɛri ani a rollo cogoya wɛrɛw la
Musaka ni baarakɛcogo balansi waleyali fɛnw na minnu ka barika hakɛ danmadɔw
A ka c’a la PVC kɛnɛ bɛ jateminɛ ni a furakɛcogo sabatilen don ka ɲɛ a maracogo makɔnɔnenw na, wa a tɛ ji-dafalen walima oksizɛni balilan kɔrɔlen dɔ wajibiya. Kandidati minnu bɛ kɛ cogoya la, olu bɛ se ka kɛ furakisɛ sugandilenw ye, furakisɛw, witaminiw, balofɛnw ani fura tata hakɛ gɛlɛn wɛrɛw pakew dilanni setigiya kɔfɛ.
Standard rigid PVC bɛ balili basigilen di, nka fura minnu bɛ se ka ji sɔrɔ kosɛbɛ walima minnu bɛ oksizɛni sɔrɔ, olu bɛ se ka kɛ sababu ye ka barika sigicogo barikama dɔ wajibiya i n’a fɔ PVC /PVDC, PVC /PE/PVDC, PVC /EVOH/LDPE, PC filimu min sinsinnen bɛ TFE kan walima pakew dilanni sira wɛrɛ min sɛgɛsɛgɛra.
Wallis bɛ fɛnw dilan sisan furakɛlicogo gɛlɛn PVC blister film min janya bɛ se milimɛtɛrɛ 0,15–0,80 ma, ni a bonya, a kulɛri, a ɲɛda fini ani a roll configuration bɛ sɔrɔ ka kɛɲɛ ni a foroko ɲɛfɔcogo ye min dagalen don.
PVDC, walima kuloridi polivinilidini, bɛ kɛ ka caya i n’a fɔ barikalan walima a yɔrɔ dɔ furakɛli kurukuru filimuw kɔnɔ. Jɛkulu min bɛ kɛ cogoya la, o bɛ baara kɛ ni PVC gɛlɛn ye i n’a fɔ basigi min bɛ se ka kɛ funteni ye k’a sɔrɔ PVDC bɛ lakana wɛrɛ di ji-la-fiɲɛ ni oksizɛni tali ma.
A tɛ i n’a fɔ PVC gansan , PVDC basigilen filimu ka barika baarakɛcogo bɛ se ka ladilan PVDC dacogo girinya fɛ , finimugu dilanni fɛ fɛn caman jɔcogo bɛɛ lajɛlen fɛ ani O b’a to pake dilannikɛlaw bɛ se ka barika hakɛ danfaralenw bɛn ni fura sabatili wajibiyalenw ye minnu tɛ kelen ye.
Ji barika ka bon ka tɛmɛ mono standard PVC kan.
Oksizɛni ni gazi barikalan ɲɛnabɔlen
Blister configurations transparentes bɛ to ka kɛ
Barika hakɛ caman bɛ se ka kɛ ɛntɛrinɛti ye ni finimugu girinya ni a jɔcogo ye
Nafa bɛ a la furaw la minnu bɛ ji sɔrɔ ani minnu bɛ oksizɛni sɔrɔ
A bɛ se ka dilan ka ɲɛsin thermoforming minɛn kɔrɔlenw ma
Kuma minnu fɔra i n'a fɔ 'PVDC ka fisa ni PVC ' ye siɲɛ tan, olu tɛ tigitigi furaw foroko sugandili la. Barika hakɛw bɛ bɔ finimugu girinya la, basigi filimu, a janya bɛɛ lajɛlen, a funteni, a nɛnɛ hakɛ, a dilanni juguya ani a sɛgɛsɛgɛli kɛcogo.
O la, sannikɛlaw ka kan ka WVTR ni OTR nafa sumanilenw ɲini ka fara sɛgɛsɛgɛli cogoyaw kan minnu bɛ sirataama sanni u k’u jigi da sariyaw dɔrɔn kan i n’a fɔ barika jɔnjɔn, barika sanfɛla walima barika min ka bon kosɛbɛ.
EVOH, walima etilɛni vinili alikɔli kopolimɛri, ye polimɛri ye min bɛ baara kɛ kosɛbɛ, min sugandira fɔlɔ a ka se ka oksizɛni ni gazi wɛrɛw cicogo ɲuman kɛlɛ. Furakɛminɛnw foroko kɔnɔ a ka ca a la a bɛ kɛ i n’a fɔ baarakɛminɛn min ka fin kosɛbɛ fɛn caman kɔnɔ sanni ka kɛ filimu gɛlɛn ye min bɛ kɛ a kelen na.
Jateminɛw i n’a fɔ PVC /EVOH/LDPE bɛ polimɛri suguya caman fara ɲɔgɔn kan bawo a ka c’a la, fɛn kelen tɛ gɛlɛya ɲuman, gazi bali, ji barika ani funteni datugulan di waati kelen na.
EVOH bɛ se ka dɔ bɔ oksizɛni tali la kosɛbɛ, o de kama a nafa ka bon furaw la minnu bɛ oksizɛni sɔrɔ, banaw sɛgɛsɛgɛli, balofɛnw ani kɛnɛyako furakɛlicogo la, yɔrɔ minnu na oksidan tiɲɛni ye pakew haminanko ye.
EVOH bɛ se ka kɛ ni jisuma ye. A ka oksizɛni-barari baara bɛ Changé ni nɛnɛ bɛ caya, o de y’a to a ka c’a la, a bɛ datugu polimɛri lakanani layiniw ni ɲɔgɔn cɛ sanni a ka bɔ kɛnɛ kan k’a ɲɛsin a yɛrɛ ma i n’a fɔ ji-yɔrɔ fɔlɔ.
Lamini laminiw i n’a fɔ LDPE walima poliyolefini wɛrɛw bɛ se ka dɛmɛ don ka ji bɔli dɔgɔya EVOH layini na, ka sɔrɔ a jɔcogo bɛɛ ka kan ka dilan walasa ka OTR laban wajibiyalenw ni WVTR sɔrɔ.
A tɛ kɛ a yɛrɛma. EVOH tɛ kulori sɔrɔ, wa a bɛ se ka don pakew kɔnɔ minnu dilannen don kɛrɛnkɛrɛnnenya la, minnu dabɔra walasa ka se ka fɛnw lasegin u cogo kɔrɔ la, nka furakɛli foroko dafalen sigida baarakɛcogo bɛ bɔ fɛnw jɔcogo dafalen na, layini kɛmɛsarada la, sigida lasegincogo infɔrɔmasiko, pakew girinya ani fɛn dilannenw lakanani baarakɛcogo.
O la, sannikɛlaw ka kan k’u yɛrɛ tanga EVOH dɔrɔn sɔrɔli ma i n’a fɔ dalilu min b’a jira ko foroko caman bɛ se ka segin ka kɛ fɛn wɛrɛ ye walima ko a ka fisa sigida ma.
Wallis ka fɛnw PVC /EVOH/LDPE pakew sɛbɛnfura min bɛ barika caman sɔrɔ, a bɛ kɛ cogoya caman na min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, furakɛli, furakɛli, sɛgɛsɛgɛli ani kɛnɛyako foroko porozɛw kama.
LDPE, walima poliyetilɛni min ka dɔgɔn, o ye poliyolefini ye min bɛ se ka wuli, a nafa ka bon kosɛbɛ funteni-datugu baara la, a bɛ se ka fɛn caman sɛgɛsɛgɛ ani a tɛ se ka ji minɛ. Furakɛcogo caman na minnu bɛ kɛ ni fɛn caman ye, a bɛ baara kɛ i n’a fɔ sirilan, kɔnɔna lamini walima lakananilan sanni ka kɛ i n’a fɔ kurukuru gɛlɛn fɔlɔ min bɛ kɛ sababu ye ka kurukuruw dilan.
PVC /EVOH/LDPE sigicogo la, PVC bɛ se ka gɛlɛya ni funteni-sɔrɔ-dɛmɛ di, EVOH bɛ oksizɛni barika dɛmɛ, ani LDPE bɛ se ka sigili baara di ka sɔrɔ fana ka dɛmɛ don ka EVOH layini lakana ka bɔ ji la.
Funteni-sigi-seko ɲuman
Layɛrɛ jɔli min bɛ se ka wuli ka bɔ a nɔ na
Ji-dafalen nafama min bɛ lamini na min dilannen don ni ɛntɛrinɛti ye
A bɛ se ka kɔnɔna barikalanw lakana minnu bɛ ji sɔrɔ
Nafa bɛ furakɛli ni furakɛli pakew jɔcogo caman na
LDPE sɔrɔli a yɛrɛ tɛ furakɛli kɛcogo ɲuman jira. Sigili daminɛ funteni, a sigi waati, a tansiyɔn, LDPE hakɛ, a janya ani a furusiri dacogo bɛɛ bɛ nɔ bila sigilan laban fanga la ani a foroko dafalen na.
O la, foroko dafalen ka kan ka jateminɛ ni sigilan fanga, a siraw, a bɔgɔbɔli ani a dafalen ye a dilanni, a tacogo ani a maracogo laɲininenw na.
Dolow jatebɔ bɛ se ka furakɛli kɛcogo nɔgɔya kojugu bawo nin fɛn naani ninnu jɔyɔrɔ tɛ kelen ye. Tablo nata bɛ ɛntɛrinɛti sumacogo dɔ di min nafa ka bon kosɛbɛ.
| Nafolo | PVC | PVDC | EVOH | LDPE |
|---|---|---|---|---|
| Jɔrɔ min bɛ kɛ cogoya la | Rigide foromasi web | Barrière coating/layer (yɔrɔ) min bɛ kɛ | Oksizɛni/gazi barikalan | Selan/protective layɛrɛ |
| Oksizɛni barikalan | Basi daminɛ | A bɛ bonya ka kɛɲɛ ni sigicogo ye | A barika ka bon kosɛbɛ cogoya bɛnnenw na | A dan ye kosɛbɛ ni i y’a suma ni gazi-bariyɛri polimɛri kɛrɛnkɛrɛnnenw ye |
| Barrière de humidité (Barière de humidité). | Baseline for standard blister tali | A ɲɛnabɔra kosɛbɛ ka kɛɲɛ ni finimugu ni a jɔcogo ye | A fanga fɔlɔ tɛ; a bɛ sɛgɛsɛgɛ ni nɛnɛ ye | Ji lakanani nafama i n’a fɔ fɛn caman sigicogo dɔ |
| Jɔrɔ min bɛ thermoforming (Tɔrmoforming) la | Fɛn fɔlɔ min bɛ kɛ ka fɛnw dilan | A ka c’a la, a bɛ dɛmɛ ni substrat thermoformable ye | A bɛ kɛ i n’a fɔ kɔnɔna layɛrɛ; total structure ka kan ka kɛ formable ye | A bɛ Kɛ ni fɛnw ye minnu bɛ Se ka Yɛlɛma walima minnu bɛ Se ka Kɛ fɛn caman ye |
| Kɛnɛyako | Kɔrɔlen ni jate jɛlenw ye | Jatebɔ jɛlenw bɛ se ka kɛ | Transparent multilayers bɛ se ka kɛ | A bɛ bɔ kalasi ni sigicogo de la |
| Sugandili hakilina ɲuman | Blister standard min bɛ formability ni barrier moderate de wajibiya | Ji ni oksizɛni lakanani ka caya | Oksizɛni-barika barikama wajibiyalen don foroko caman kɔnɔ | Sigili ni ji-dɛmɛ baara bɛ kɛ fɛn caman na |
Oksizɛni tali hakɛ (OTR) bɛ oksizɛni hakɛ jateminɛ min bɛ tɛmɛ pake kɔnɔ sɛgɛsɛgɛli kɛcogo ɲɛfɔlenw kɔnɔ. OTR nafa ka bon kɛrɛnkɛrɛnnenya la furakɛlifɛnw na minnu bɛ se ka kɛ ni oksidan tiɲɛni ye.
Ji lafiɲɛbɔ hakɛ (WVTR) bɛ ji-dafalen doncogo suman pakew sigicogo dɔ fɛ cogoya ɲɛfɔlenw kɔnɔ. WVTR nafa ka bon kɛrɛnkɛrɛnnenya la furakisɛw la minnu bɛ ji sɔrɔ, furakisɛw ani furakisɛw minnu sabatili bɛ Changé ni ji bɛ u la.
Barika hakɛw bɛ se ka Changé ni funteni, nɛnɛ hakɛ, janya ani sɛgɛsɛgɛli kɛcogo ye. O la, feerekɛlaw ka fɛn ɲɛfɔlen fila man kan ka suma ɲɔgɔn na fo ni cogoya fɔlenw bɛ bɛn ɲɔgɔn ma.
A ka fisa RFQ ka kan ka OTR walima WVTR laɲini fɔ ka fara funteni, nɛnɛ hakɛ kan ani sɛgɛsɛgɛli fɛɛrɛ min bɛ se ka kɛ.
Fura filimuw bɛ sɔgɔsɔgɔ thermoforming waati. Ni filimu donna dingɛ juguman dɔ kɔnɔ, o fɛn bɛ fin dingɛ kogow ni a nɔngɔnw na. O bɛ se ka masin fanga ni barika baarakɛcogo fila bɛɛ Changer ni i y’a suma ni filimu fla-fla-sɔrɔcogo fɔlɔ ye.
O la, fɛn nafamaw kama, pake dilanni injiniyɛriw ka kan ka barika ni a dafalen jateminɛ kurukuru dilannen banbali , a tɛ kɛ dɔrɔn OTR walima WVTR ye min bɛ kɛ ni roll material fɔlɔ ye.
Forming depth, draw ratio, heating profile, cavity shape ani layers distribution, olu bɛɛ ka kan ka jateminɛ setigiya waati.
Fura kuru ye pake dafalen ye min bɛ kɛ ni foroko ye, furakɛlifɛn, datugulan ani sigilan. Ni aw ye duguma filimu bɛnnen sugandi k’a sɔrɔ aw ma da tugucogo bɛnkan dafa, o bɛ se ka kɛ sababu ye ka sigilan fanga dɔgɔya walima ka pake dafalen tiɲɛ.
PVC kurukuru kɔrɔlenw ka teli ka baara kɛ ni aliminiyɔmu datugulan ye ni funteni-sigilan ye min dilannen don walasa ka siri PVC la . PE walima LDPE bɛ sɔrɔ yɔrɔ caman na, olu bɛ se ka kɛ sababu ye ka sigicogo wɛrɛ kɛ. O la, sannikɛla ka kan ka sisan datugulan ɲɛfɔcogo di ni a bɛ se ka filimu wɛrɛ bila a nɔ na.
Aw bɛ a dɔn ni furakisɛ min bɛ pake kɔnɔ, o bɛ se ka kɛ fɔlɔ ni ji, oksizɛni, yeelen, funteni walima nin cogoya ninnu faralen ye ɲɔgɔn kan. Foroko ka kan ka sugandi walasa ka fura in lakana a maracogo laɲininen bɛɛ kɔnɔ.
Aw bɛ sabatili wajibiyalen caman tigɛli kɛ ka kɛ pakew laɲinitaw ye minnu bɛ se ka suman, yɔrɔ o yɔrɔ bɛ se ka kɛ. Aw ye aw yɛrɛ tanga fɛn ɲɛfɔlenw ma minnu b'a fɔ dɔrɔn ko 'bariyɛri sanfɛ' k'a sɔrɔ aw ma oksizɛni ni ji-ji-sɔgɔli baarakɛcogo makɔnɔnen ɲɛfɔ.
Funteni ni nɛnɛ min bɛ sɔrɔ a marali ni a tilali waati la, o bɛ se ka nɔba bila pakew baara la. Fɛn minnu bɛ ci yɔrɔw la minnu ka suma ani minnu ka nɛnɛ, olu bɛ se ka kɛ sababu ye ka barika jiracogo wɛrɛ ɲini ka tɛmɛ fɛnw kan minnu bɛ tilatila cogoyaw la minnu tɛ gɛlɛya kosɛbɛ.
Tablɛti hakɛw, kapisi hakɛ, a kɔnɔna juguya ani a ja hakɛ bɛ nɔ bila fɛnw finman na thermoforming waati. O la, filimu fla janya tɔgɔlama ka kan ka sugandi ka fara a kɔnɔna dilancogo dafalen kan.
Masina sumayɔrɔw, u dilanni fɛɛrɛ, layini teliya, ɛntɛrinɛti bonya, sigicogo ani sɛbɛnni wajibiyalenw bɛ se ka nɔ bila fɛnw sugandili la. Sannikɛla minnu bɛ fɛn dilanbaga kɔrɔ dɔ bila a nɔ na, olu ka kan ka filimu ɲɛfɔli sisan ani masin modɛli di ni a bɛ se ka kɛ tuma o tuma.
Aw bɛ datugulan papiye walima sigilan-web ɲɛfɔli, sigilan fanga wajibiyalen ani sigicogo cogoyaw di walasa foroko-web ni datugulan faralen ɲɔgɔn kan dafalen ka se ka jateminɛ.
Fɛnɲɛnɛmako seko ka kan ka kɛ pake dilannen yɛrɛ ye ani min datugulen don, a dilanni, a tacogo, a maracogo ani a sabatili cogoyaw la minnu bɛ tali kɛ a la sanni ka i jigi da feerekɛla dɔ ka filimu fla fɛɛrɛbɔ kunnafoniw dɔrɔn kan.
| Foroko sigicogo | Fanga fɔlɔ | Sugandili cogoya cogoya |
|---|---|---|
| Mono PVC | Thermoforming, jɛya ani musaka dɔgɔyali | Fɛn minnu bɛ ni barika ɲininiw ye minnu ka dɔgɔn kosɛbɛ |
| PVC /PVDC ye baara kɛ | Ji ni oksizɛni barika bonya | Fɛn minnu bɛ se ka ji walima oksizɛni sɔrɔ, olu bɛ pake jɛlenw de wajibiya minnu dilannen don ni funteni ye |
| PVC /PE/PVDC ye baara kɛ | Barrière sanfɛla faralen ɲɔgɔn kan ni multilayer forming walima sealing baarakɛcogo ye | Barrière min ka ca ni fɛn caman ye ani fɛn caman tigɛli wajibiyalenw |
| PVC /EVOH/LDPE ye baara kɛ | Oksizɛni barika barikama ka fara sigili baarakɛcogo kan | Fɛn minnu bɛ oksizɛni sɔrɔ, olu bɛ mago ɲɛ fɛn caman na minnu bɛ yeelen bɔ |
| PC Filimu min sinsinnen bɛ TFE kan | Ji barikalan min ka bon kosɛbɛ | Fura minnu bɛ ji sɔrɔ kosɛbɛ, yɔrɔ minnu na, duguma-dakunw tɛ sabatili laɲiniw dafa |
| Aluminiyɔmu min bɛ kɛ ni nɛnɛ ye | Ji ka ca kosɛbɛ, oksizɛni ani yeelen lakanani | Fɛn minnu bɛ barika caman wajibiya yɔrɔ minnu na kɛnɛyako tɛ wajibiya |
Fɛn min ɲɛfɔlen don ko 'furakɛcogo', o man kan ka jate dalilu ye min b’a jira ko foroko dafalen bɛɛ bɛnnen don fura walima sugu bɛɛ ma a yɛrɛma.
Furakɛlaw ka kan ka pakew dilanni dafalen jateminɛ ka kɛɲɛ ni fura laɲininen ye, ka kɛɲɛ ni a sɔrɔcogo ye, barika ɲininiw, a bɛnkan, a lakanani, a lakanani, a dilanni taabolo ani a taayɔrɔ-sɔgɔli sariyaw minnu bɛ sirataama.
Sannikɛlaw ka kan ka fɛn ɲɛfɔlenw ɲini minnu bɛ tali kɛ o la, sɛgɛsɛgɛli rapɔɔriw ani sariyasɛbɛnw, minnu bɛ tali kɛ fɛn hakɛ tigitigi min na, n’o bɛ se ka kɛ, ani k’u yɛrɛ ka pakew dilanni ni u sabatili-sɛgɛsɛgɛli baara dafa.
Sigida sabatili tɛ se ka jira ka ɲɛ ni PVC , PVDC, EVOH ani LDPE ye 'dolow hakɛ nɔgɔman dɔ di u ma minnu tɛ sigida lakana.' Furakɛcogo foroko ka kan ka fɔlɔ ka barika ni dafalen di min ka kan ka fura lakana a marali waati laɲininen bɛɛ kɔnɔ.
Fɛn minnu bɛ tali kɛ sabatili la, olu bɛ se ka kɛ fɛnw girinya bɛɛ lajɛlen ye, polimɛriw hakɛ, halojɛni hakɛ, fɛn dilanni nafabɔli marabolo jidagayɔrɔ laɲininen kɔnɔ, fɛn dilanni nafa, kurukuruw senna, pake filananw wajibiyalenw ani fɛn dilannenw bɔnɛni farati min bɛ sɔrɔ barika lakanani dafabaliya fɛ.
Fura foroko dilanni baarakɛlaw bɛ ka fɛnw labɛn minnu sinsinnen bɛ fɛn kelen kan ani minnu sinsinnen bɛ poliyɔlefini kan, o la, dilancogo sugandilenw bɛ yen minnu bɛ baara kɛ ni EVOH ye i n’a fɔ oksizɛni balilan finman. Nka, fɛnw lasegincogo fɔlenw ka kan ka sɛgɛsɛgɛ pake dafalen dafalen na ani nɔgɔko ɲɛnabɔcogo laɲininen na.
Foroko kɛcogo : furakisɛ kurukuru, furakisɛ kurukuru, balodɛsɛ, bana sɛgɛsɛgɛli, furakɛli walima cogo wɛrɛ.
Jatebɔ min bɛ yen: PVC , PVC /PVDC, PVC /PE/PVDC, PVC /EVOH/LDPE walima sisan feerekɛla TDS.
A janya bɛɛ lajɛlen : filimu walima sɛbɛnfura jateminɛnan wajibiyalen.
Layɛrɛ jɔcogo : finimugu girinya walima layɛrɛ hakɛ yɔrɔ min ɲɛfɔra kaban.
OTR laɲinitaw : funteni, RH ani sɛgɛsɛgɛli kɛcogo sen bɛ o la.
WVTR laɲini : funteni, RH ani sɛgɛsɛgɛli kɛcogo sen bɛ o la.
Blister machine : a dilabaga, a modɛli ani a layini teliya yɔrɔ minnu na a bɛnnen don.
Kɔlɔn hakɛw : tablɛti/kapisilɛri hakɛ, kɔnɔna juguya ani ja.
Datugulan fɛn: aluminiyɔmu walima sigilan-web ɲɛfɔli wɛrɛ.
Roll specification: a bonya, a kɔnɔna cɛmancɛ, a roll diameter ani a winding wajibiyalen.
Kulɛri ni jɛya: kulɛri jɛlen, tintin, opaque walima kulɛri min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
Fɛnmarayɔrɔ waati : funteni ni nɛnɛ cogoya minnu bɛ makɔnɔ.
Sugu min bɛ taa yɔrɔ la: jamana walima mara ani sɛbɛnw wajibiyalenw.
Hakɛ : misali, tiɲɛni hakɛ ani jago ɲinini makɔnɔnen.
Wallis bɛ furakɛlifɛnw foroko caman dilan minnu ka gɛlɛn ani minnu bɛ kɛ fɛn caman na, i n’a fɔ PVC blister film gansan, PVDC-based high-barrier structures ani PVC /EVOH/LDPE multilayer sheet ka ɲɛsin barika ni fɛn caman tigɛli wajibiyalenw ma.
Fɛn minnu bɛ kɛ ka fɛnw janya, u bonya, u kulɛri, u tɛ ye, u ka rollo hakɛw, u kɔnɔna hakɛ ani u labɛncogo caman bɛ se ka fɔ ka kɛɲɛ ni kiliyan ka blister machine ye ani ka kɛɲɛ ni pakew cogoya ye min dabɔra.
Porozɛ minnu bɛ kɛ ni barika caman ye, sannikɛlaw bɛ se k’u ka oksizɛni ni ji-ji-sɔgɔli wajibiyalenw laɲinitaw di sanni u k’u jigi da ɲɛfɔli caman dɔrɔn kan i n’a fɔ barika cɛmancɛ walima barika caman.
Furakɛminɛnw ka kan ka jateminɛ dilanminɛn laɲinitaw kan, ka se ka kɛ ni fura yɛrɛ ye, u dilanni cogoyaw, u datugucogo ani u maracogo wajibiyalenw sani u ka baara kɛ ni u ye jago siratigɛ la.
PVC gɛlɛn bɛ kɛ ka caya i n’a fɔ thermoformable forming web min bɛ tablette walima capsule cavity dilan. A bɛ jɛya, gɛlɛya, foroko baarakɛcogo ani musaka dɔgɔyali faralen ɲɔgɔn kan nafama di.
Plain PVC bɛ fɔlɔ ka thermoforming ni structural support di. PVDC bɛ min na walima PVDC bɛ min na, o bɛ dɔ fara ji ni oksizɛni tali kan. Barika ɲɛnabɔli tigitigi bɛ bɔ finimugu girinya ni a jɔcogo bɛɛ lajɛlen na.
Ayi PVDC bɛ barika baarakɛcogo wɛrɛw di nka a bɛ sigicogo dɔ fana da min ka gɛlɛn kosɛbɛ, wa a ka c’a la, musaka ka bon. PVC gansan bɛ se ka kɛ ni sabatili sɛgɛsɛgɛliw y’a jira ko fura mago tɛ barika wɛrɛ la.
EVOH bɛ sugandi fɔlɔ a ka oksizɛni ni gazi barika ɲuman kosɔn. A ka c’a la, a bɛ don a kɔnɔ i n’a fɔ kɔnɔna layini caman foroko caman kɔnɔ.
Ji barikalan tɛ EVOH ka baara fɔlɔ ye. EVOH bɛ nɛnɛ dɔn, o la a ka ca a la a bɛ lakana ni polimɛri laminiw ye. Pake multilayer dafalen ka WVTR bɛɛ ka kan ka jateminɛ a danma.
LDPE bɛ se ka funteni-datugu baarakɛcogo di, ka fɛn caman sɛgɛsɛgɛ ani ka ji lakana ka sɔrɔ ka dɛmɛ don ka EVOH oksizɛni-barikalan yɔrɔ bɔ nɛnɛ na.
A tɛ kɛ cogo la min bɛ kɛ cogoya la. LDPE bɛ kɛ ka caya i n’a fɔ sigilan min bɛ se ka wuli walima min bɛ baara kɛ ni fɛn caman ye. PVC gɛlɛn walima polimɛri gɛlɛn wɛrɛ min bɛ se ka kɛ ni funteni ye, o bɛ a ka ca a la, o bɛ kurukuruw jɔcogo di.
OTR kɔrɔ ye Oksizɛni jɛnsɛnni hakɛ ye. A bɛ oksizɛni doncogo suman pakew kɔnɔ cogo kɛrɛnkɛrɛnnenw na, wa a ye fɛn nafamaba ye oksizɛni sɔrɔcogo fɛnw na.
WVTR kɔrɔ ye Ji lafiɲɛbɔ hakɛ ye. A bɛ ji-la-doncogo suman pakew kɔnɔ cogo kɛrɛnkɛrɛnnenw na, wa a nafa ka bon kosɛbɛ fɛnw na minnu bɛ ji sɔrɔ.
Ni nafaw suman dɔrɔn ni fɛnw janya, funteni, nɛnɛ hakɛ ani sɛgɛsɛgɛli fɛɛrɛw ye minnu bɛ se ka suma ɲɔgɔn ma. Barika hakɛ minnu fɔra cogoya wɛrɛw la, olu man kan ka jate i n’a fɔ u bɛ bɛn ɲɔgɔn ma k’u ɲɛsin ɲɔgɔn ma.
Awɔ. Thermoforming bɛ fɛn in sɔgɔsɔgɔ ani a bɛ se ka dɔ bɔ layini kelen-kelen bɛɛ janya la dingɛ kogow ni nkɔni na. Fɛn minnu nafa ka bon kosɛbɛ, olu ka kan ka jateminɛ ni pake dilannen yɛrɛ ye.
Jaabi si tɛ yen min bɛ diɲɛ bɛɛ kɔnɔ. PVDC caman, PC TFE basigilen walima nɛnɛ cogoya aluminiyɔmu jɔcogo bɛ se ka jateminɛ ni ji-dafalen jiginni dɔgɔyalenba de ka kan. Desizɔn laban ka kan ka sinsin fura sabatili ni pakew tiɲɛni kunnafoniw kan.
EVOH bɛ sɔrɔ fɛn caman na, olu bɛ se ka kɛ kandida barikamaw ye yɔrɔ minnu na oksizɛni lakanani ye wajibi fɔlɔ ye. PVDC ni barikalan caman wɛrɛw fana bɛ se ka jateminɛ ka kɛɲɛ ni jisuma, u dilanni ani sariyaw ye.
Segin-ka-bɔnye bɛ bɔ fɛn caman jɔcogo dafalen na, EVOH kɛmɛsarada la, polimɛri wɛrɛw, datugulanfɛnw ani sigida lasegin-ka-bɔ-yɔrɔ. EVOH sɔrɔli dɔrɔn t’a jira ko furakɛli foroko dafalen bɛ se ka segin ka kɛ fɛn wɛrɛ ye.
Awɔ. Sannikɛlaw ka kan ka foroko, sigili, sɛbɛnni kɛcogo jateminɛ yɔrɔ minnu na a bɛnnen don, hakɛ sabatili, pake dafalen dafalen ani barika baarakɛcogo wajibiyalen pakew dilanni minɛn laɲininenw kan sani u ka se ka jago kɛ.
PVC , PVDC, EVOH ani LDPE man kan ka jate dɔrɔn i n’a fɔ furakɛli kurukuru filimu naani minnu bɛ ɲɔgɔn sɔsɔ. Polimɛri kelen-kelen bɛɛ bɛ baara wɛrɛ kɛ, wa pake caman dilanni bɛ baara kɛ ni o baara ninnu faralen ye ɲɔgɔn kan ka kɛ fɛn ye min bɛ bɛn furakɛlifɛn ma.
PVC bɛ gɛlɛya ni thermoforming di. PVDC bɛ ji ni oksizɛni balilan ɲɛ. EVOH bɛ oksizɛni ni gazi lakanani barikama di nka a ka c’a la, a bɛ lamini laminiw de wajibiya minnu bɛ ji tanga. LDPE bɛ sigili di ani ka dɛmɛ don ji lakanani na dilancogo caman kɔnɔ.
Walasa ka furakɛli foroko porozɛ kura dɔ kɛ, aw bɛ aw ka sisan sigicogo di Wallis ma, OTR ni WVTR laɲinitaw, filimu janya, dingɛ jateminɛcogo, blister-machine kunnafoniw, dacogo ɲɛfɔli, taayɔrɔ waati ani hakɛ wajibiyalen walasa fɛn bɛnnenw ka se ka jateminɛ walasa ka misali setigiya sɔrɔ.
