|
PVC
WALLIS
| nafa bɛ se ka da u kan: | |
|---|---|
| Hakɛ: | |
Wallis bɛ furaji gɛlɛnw di PVC kurukuruw filimu ni sɛbɛn gɛlɛnw ma furakisɛ, furakisɛ, witamini, balodɛsɛ, baganmara ani kɛnɛyako pake sugandilenw kama. PVC foroko web gɛlɛn bɛ ɲɛnayeli jɛlen di, a hakɛ sabatili ani thermoforming baarakɛcogo kɔrɔsilen furakɛli blister dilanni na min bɛ kɛ cogo la.
Wallis furakɛli PVC bɛ sɔrɔ milimɛtɛrɛ 0,15–0,80 ɲɔgɔn na, a janya ni a bonya bɛ se milimɛtɛrɛ 680 ɲɔgɔn ma , ni sugandiliw ye minnu bɛ ye, minnu ɲɛ ye ɲɛgɛn ye, minnu ɲɛw ye ɲɛgɛn ye, minnu tɛ ye, minnu bɛ manamana ani minnu tɛ ye ka kɛɲɛ ni porozɛ ka ɲininiw ye.
PVC gɛlɛn gansan bɛ sugandi fɔlɔ yɔrɔ minnu na funteni-sɛnɛcogo ɲuman, jɛya, masinw lakanani ani musaka dɔgɔyali ka kan ka kɛ yɔrɔ minnu na ani furakɛlicogo tɛ ji walima oksizɛni balilan kɔrɔlen de wajibiya. Fɛn minnu ka gɛlɛn kosɛbɛ, olu ka kan ka jateminɛ ni PVC /PVDC, PVC /PE/PVDC, PC TFE-based walima barikalan wɛrɛw ye minnu ka bon kosɛbɛ ka kɛɲɛ ni sabatili kunnafoniw ye.
Nin nafa ninnu bɛ Wallis ka fɛn dilannenw suguya jira sisan. Fɛn labanw, muɲuliw ani sɛgɛsɛgɛli kɛcogo ka kan ka dafa ka kɛɲɛ ni furaw foroko hakɛ ni sanni kɛcogo ye min dagalen don.
| Paramɛtiri | Typique Specification / Kɔlɔsili |
|---|---|
| Ka kɛ | Furakɛcogo gɛlɛn PVC Blister Film / PVC Hard Sheet |
| Minɛ | PVC gɛlɛn min dilannen don furakɛli kurukuruw foroko kɔnɔ |
| A ka bon kosɛbɛ | A bɛ Taa milimɛtɛrɛ 0,15–0,80 ɲɔgɔn na |
| Jayan | Fo ka se milimɛtɛrɛ 680 ɲɔgɔn ma; slitting customized bɛ sɔrɔ |
| Ɲɛ | Transparent, tinted, colored walima opaque |
| Surface Finish (Sufɛla Fini). | Glossy, matte walima fini min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye |
| Ji minɛcogo (Moisture Absorption). | Sisan Wallis ka ɲɛfɔli lisi ≤0,1%; sɛgɛsɛgɛli kɛcogo dafa ka ɲɛsin kalasi yamaruyalen ma |
| Tensile (Tensile) fanga | Wallis ka ɲɛfɔli sɛbɛnw bɛ ≥48 MPa jira sisan; sira jirali ni sɛgɛsɛgɛli kɛcogo dafa ka ɲɛsin kalasi yamaruyalen ma |
| Termoforming (sɛnɛfɛnw sɛnɛcogo). | A dabɔra furakɛli blister thermoforming kɛcogo minnu bɛ bɛn ɲɔgɔn ma |
| Lidding Compatibilité (datugulan bɛnkan). | Sitimɛ minnu bɛ bɛn ɲɔgɔn ma, olu bɛ se ka baara kɛ ni aluminiyɔmu datugulan ye ni funteni-sigilan ye min dilannen don PVC kama. |
| Format de fourniture | Roliw (Rollo) minnu bɛ yen; sɛbɛnfura cogoya caman tigɛli ka kɛɲɛ ni poroze dafalen ye |
| Aplikasiw (applications) minnu bɛ kɛ | Tablɛti, furakisɛ, balodɛsɛ fura, baganmara ani kɛnɛyako kurukuru sugandilenw |
| Ka kɛɲɛ ni mɔgɔw sago ye | A janya, a bonya, a kulɛri, a laban, a kuru hakɛ, a kɔnɔna hakɛ ani a foroko minnu bɛ taa jamana wɛrɛw la |
Furakɛcogo gɛlɛn PVC Blister Film
PVC Furakɛcogo pakew filimu
Furakɛcogo gɛlɛn PVC filimu ye plastiki dilancogo ye min bɛ se ka kɛ ni funteni ye, min bɛ kɛ ka kɔnɔnatumuw dilan kurukuruw foroko kɔrɔlenw kɔnɔ. Fɛn in bɛ sumaya, ka dilan ka ɲɛsin kɔnɔna jateminɛ wajibiyalen ma, ka fa fura la, ka sɔrɔ ka datugu ni datugulan ye min bɛ bɛn a ma.
PVC bɛ kurukuruw kɔnɔna jɔcogo basigilen di. A ka gɛlɛya bɛ bɔrɔ min dilannen don, o dɛmɛ k’a cogoya mara a facogo, a datugucogo, a tigɛcogo, a kɛtɔ ka kartɔn kɛ, a tacogo ani a musakabɔtuma na.
PVC jɛlen bɛ a to furakisɛ walima furakisɛ ka to yelen na kurukurunin fɛ, o bɛ furaw dɔnni ni a lajɛ ɲɛnama dɛmɛ. PVC kulɛri walima opaque fana bɛ se ka baro kɛ yɔrɔ minnu na ɲɛnayeli danfara walima yeelen marali wajibiyalen don.
Plain rigid PVC bɛ jateminɛ kosɛbɛ yɔrɔ minnu na furaw dilanni bɛ ni barika hakɛ danmadɔw ye ani pakew dilanni injiniyɛriw bɛ fɔlɔfɔlɔ kɛ thermoformability, clearity, machine productivity ani musaka dɔgɔyali la.
O danfara in nafa ka bon ni furaw foroko sugandili ye. Ni fɛnw ji minɛcogo hakɛ dɔgɔyara, o kɔrɔ tɛ a yɛrɛma ko filimu bɛ barika caman di ji la min tɛ tɛmɛ foroko kɔnɔ.
Ji minɛcogo bɛ polimɛri yɛrɛ bɛ ji hakɛ min minɛ sɛgɛsɛgɛli cogoya ɲɛfɔlen dɔ kɔnɔ, o suman. Wallis ka ɲɛfɔli min bɛ sen na sisan, o bɛ nafa jira min ye ≤0,1% ye nin fura in na.
WVTR bɛ jisuma hakɛ ɲɛfɔ min bɛ tɛmɛ pake kɔnɔ funteni ni nɛnɛ cogoya ɲɛfɔlenw na. Nin ye jateminɛ ye min bɛ tali kɛ kosɛbɛ ni aw bɛ a latigɛ ni furakɛli kurukuru bɛ lakana bɛrɛ di fura ma min bɛ ji sɔrɔ.
PVC gansan bɛ se ka bɛn furakɛlicogo sabatilenw ma, yɔrɔ minnu na jiko gɛlɛya wajibiyalen bɛ se ka sɔrɔ ni pakew dilanni dafalen ye ani sabatili porogaramu min sɛgɛsɛgɛra.
Fura minnu bɛ ji sɔrɔ, minnu bɛ ji sɔrɔ kosɛbɛ walima minnu bɛ oksizɛni sɔrɔ, olu bɛ se ka kɛ sababu ye ka PVC /PVDC, PVC /PE/PVDC, PC filimu min sinsinnen bɛ TFE kan, aliminiyɔmu nɛnɛma walima fɛn wɛrɛ min ka barika ka bon.
Thermoforming performance ye sababu nafama dɔ ye min b’a to rigid PVC bɛ to ka baara kɛ kosɛbɛ furakɛli kurukuruw la minnu bɛ kɛ ka caya. Fɛnɲɛnɛmaw girinya, u dilanni, u sumaya kɛcogo, u dilannicogo ani u sigicogo bɛ baara kɛ ɲɔgɔn fɛ walasa ka kɔnɔna dafalen jogo dɔn.
Filimu janya basigilen bɛ ɛntɛrinɛti dɛmɛ ka sumaya cogo kelen na a bonya bɛɛ la, o bɛ dɔ bɔ fɛn caman ɲɔgɔnnabɔli la kurukuruw cɛ ani ka jago sabatili dɛmɛ.
Fɛnɲɛnɛma cogoya bɛnnenw bɛ dɛmɛ ka dingɛw dilan minnu ɲɛfɔlen don ka ɲɛ, k’a sɔrɔ u ma fin kojugu, u ma wuli walima u tɛ degun taamasiɲɛw sɔrɔ minnu man ɲi.
Kɔnɔ minnu ka dun, olu bɛ ɲinini caman kɛ PVC filimu kan bawo o fɛn bɛ wuli ka caya kɛrɛfɛ kogow ni nkɔni na. Sannikɛlaw ka kan ka furakisɛ walima furakisɛ hakɛw ni a kɔnɔna juguya di ni u bɛ PVC sɛgɛsɛgɛli kura jateminɛ.
Furakɛcogo PVC filimu bɛnnenw bɛ se ka jateminɛ kɛ kurukuruw kan minnu bɛ wuli ani minnu bɛ kɛ dilan fla ye. Ikomi tasuma-fanga-yɔrɔw, foroko-sɛrɛw ani ɛntɛrinɛti minɛcogo tɛ kelen ye masinw ni ɲɔgɔn cɛ, o la, kalasi laban ka kan ka se ka kɛ fɛn dilanni sira yɛrɛ kan.
Alu- PVC blister foroko kɔrɔlen bɛ baara kɛ ni aliminiyɔmu datugulan ye min bɛ ni funteni-sigilan ye min dilannen don walasa ka siri PVC dilancogo web la. O la PVC -ni-lidding faralen ɲɔgɔn kan dafalen ka kan ka jateminɛ i n’a fɔ pakew sigicogo kelen.
Aluminiyɔmu papiye bɛɛ tɛ baara kɛ ni funteni-datugulan kelen ye. Sannikɛlaw ka kan ka lidding-foil specification yɛrɛ di ni u bɛ se ka PVC blister film kura sɔrɔ.
Sigilan funteni ka kan ka ɲɛ ka fara degun kan, a sigili waati ani a dilanni teliya. Baarakɛyɔrɔ finɛtiri nafama nafa ka bon ka tɛmɛ k’a miiri ko sigilan funteni kelen bɛ baara kɛ layini kelen-kelen bɛɛ kan.
Sigilan fanga, siraw, bɔgɔbɔli ani kurukuruw bɛɛ lajɛlen dafalen ka kan ka lajɛ ni kiliyan ka foroko lakika ye, datugulan fɛnw ani jagofɛnw foroko cogoyaw.
PVC gɛlɛn bɛ se ka kɛ sababu ye ka thermoforming kɛcogo kɔrɔsilen di furakisɛw ni furakisɛw kurukuruniw kɔnɔ minnu bɛ kɛ ka caya ni u bonya, u hakɛ ani u kɛcogo bɛ bɛn ɲɔgɔn ma ka ɲɛ.
Transparent PVC bɛ sira di furaw yecogo jɛlen ma ani a bɛ se ka dɛmɛ don ka dɛmɛ don furakisɛw ni furakisɛw sɛgɛsɛgɛli la ni bolo ye walima ni otomatiki ye.
O jɔli gɛlɛn bɛ dɛmɛ don ka ɲɛsin kɔnɔna hakɛ sabatilenw ma duguma fani, sigili, tigɛ ani kartɔn baara waatiw la.
PVC bɛ se ka farikolo tanga nafama di kemikɛli caman ma minnu bɛ sɔrɔ pakew tali cogo la. O bɛɛ n’a ta, ni a bɛ bɛn furakɛlicogo kɛrɛnkɛrɛnnen ma, saniyacogo walima fɛn wɛrɛw ma minnu bɛ ɲɔgɔn sɔrɔ, o bɛɛ n’a ta, o ka kan ka jateminɛ yɔrɔ minnu na a bɛnnen don.
Furakɛcogo minnu tɛ barikalan jɔcogo kɔrɔlen wajibiya, PVC gɛlɛn jɛlen bɛ balansi nafama di sigicogo, yecogo, masin lakanani ani fɛnw musaka ye.
A bonya, a kuru bonya, a kulɛri, a sanfɛla fini, a kɔnɔna hakɛ ani a kuru cogoya bɛ se ka baro kɛ ka kɛɲɛ ni kurukuruw masin ni pake dafalen ye.
PVC gɛlɛn gansan bɛ jate ka caya da la furakisɛ gɛlɛnw na minnu sabatilen don ni kurukuru jɛlen ye min bɛ kɛ ni funteni ye, o bɛ lakana bɛrɛ di.
PVC fana bɛ se ka kɛ ka kɛ kapisilɛriw ye. Kapisi belebelebaw bɛ se ka kɛ sababu ye ka filimu janya ni a dilanni cogoyaw sugandi ka ɲɛ barisa kɔnɔna juguya bɛ dɔ fara fɛnw jiginni kan.
Witaminiw ni dumuni dafalanw minnu ka sabatili cogoya bɛnnen don, olu bɛ se ka baara kɛ ni kurukuruw ye minnu bɛ ye walima minnu ɲɛ ye kulɛri ye PVC yɔrɔ minnu na ji ni oksizɛni lakanani wajibiyalen bɛ sɔrɔ pakew dilanni sira dafalen fɛ.
Baganmara furakisɛ sugandilenw, furakisɛw ani fura tata hakɛ gɛlɛn wɛrɛw fana bɛ se ka kɛ ni PVC kurukuru gɛlɛnw ye fura kɛrɛnkɛrɛnnenw ka setigiya kɔfɛ.
PVC gɛlɛn fana bɛ se ka jateminɛ kɛnɛyako ni feerekɛlaw ka pakew kɛcogo sugandilenw na minnu tɛ sterili ye. Furakɛcogo-minɛnw foroko sterili bɛ a ɲini ka fɛnw, u datugulanw, u sigilanw dafalen ani u ka sterilize bɛnkanw sɛgɛsɛgɛ danfara la.
Tablɛti Blister Foroko
Kapisilɛri Blister Packaging
PVC janya bɛnnen bɛ bɔ kɔnɔna jateminɛcogo la, fɛn dilannenw hakɛw, bɔrɔw gɛlɛya wajibiyalenw ani blister-machine cogoyaw. Wallis bɛ milimɛtɛrɛ 0,15–0,80 hakɛ caman di, nka furakɛli kurukuruw tali bɛ baara kɛ ni yɔrɔ dɔrɔn de ye min bɛ bɛn foroko kɛrɛnkɛrɛnnen ma.
A ka ca a la, furakisɛw ni furakisɛ belebelebaw bɛ dingɛ belebelebaw de wajibiya, wa u bɛ se ka kɛ sababu ye ka PVC jateminɛ wɛrɛ de wajibiya ka tɛmɛ furakisɛ misɛnniw kan.
Foroko juguya ka bon, o bɛ kɛ sababu ye ka fɛn caman kɛ ka ɲɛsin kɔnɔna kogo ma. O la, kɔnɔna fanga dafalen ka kan ka jateminɛ sanni ka filimu sugandi dɔrɔn ka bɔ filimu fla-fla tɔgɔlama janya la.
Kurukuruw bɔli masin suguya wɛrɛw bɛ baara kɛ ni funteni ni u dilanni sɛrɛkili suguya wɛrɛw ye. Aw bɛ aw ka sisan fɛnw janya ni masin modɛli di ni aw bɛ fɛn dilanbaga wɛrɛ bila a nɔ na.
Kɔnɔna laban ka kan ka jɔcogo lakanani bɛrɛbɛrɛ di a facogo, a datugucogo, a foroko filananw ani a tali waati la k’a sɔrɔ a ma baara kɛ ni fɛn kunntanw ye.
| Materiel | Primaire Advantage | Typique Sugandili Logique |
|---|---|---|
| Rigid PVC | Fɛn jɛlen, thermoformability ani musaka dɔgɔyali | Furakɛcogo sabatilenw minnu ka barika ka dɔgɔn kosɛbɛ |
| PVC /PVDC ye baara kɛ | Ji ni oksizɛni balilan ɲɛnabɔlen | Fɛn minnu bɛ ji walima oksizɛni sɔrɔ, olu bɛ kurukuru jɛlen de wajibiya |
| PVC /PE/PVDC ye baara kɛ | Barrière faralen ɲɔgɔn kan ni multilayer forming walima sealing baarakɛcogo wɛrɛw ye | Foroko ni barika ɲinini minnu ka gɛlɛn kosɛbɛ |
| PC Filimu min sinsinnen bɛ TFE kan | Ji barikalan min ka bon kosɛbɛ ka sɔrɔ a bɛ kɛnɛya sabati | Fura minnu bɛ ji sɔrɔ kosɛbɛ |
| Aluminiyɔmu min bɛ kɛ ni nɛnɛ ye | Ji, gazi ani yeelen lakanani ka bon kosɛbɛ | Furakɛcogo minnu bɛ se ka kɛ kosɛbɛ, yɔrɔ minnu na kɛnɛyako man kan ka kɛ |
Barikalan min ka bon kosɛbɛ, o tɛ a yɛrɛma pake sugandili ɲuman ye. Jatebɔ ɲuman ka kan ka fura in sabatili wajibiyalen wasa ka sɔrɔ ka balansi don foroko kɛcogo ɲuman na, kurukuruw hakɛ, layini nafa sɔrɔli ani a foroko musaka bɛɛ lajɛlen.
Transparent PVC bɛ fura yecogo caman di, wa a bɛnnen don yɔrɔ minnu na furakisɛw walima furakisɛw ka kan ka to ka ye kurukuru dafalen fɛ.
Amber, blue, green walima tintin fura wɛrɛw bɛ se ka baro kɛ walasa ka ɲɛnayeli danfara. Yɔrɔ minnu na fura in bɛ yeelen dɔn, yeelen bɔli yɛrɛyɛrɛ min bɛ kɛ ni jikuru kɛrɛnkɛrɛnnen ye, o ka kan ka tiɲɛ sanni ka da kulɛri cogoya dɔrɔn kan.
Kulɛri minnu tɛ ye, olu bɛ se ka dilan yɔrɔ minnu na fɛn dilannenw yecogo tɛ mako ɲɛ walima yɔrɔ minnu na pakew dilanni bɛ yecogo dogocogo barikama de wajibiya.
Gauge consistente bɛ dɛmɛ don ka ɲɛsin funteni, foroko ani cavity rigidity ma min bɛ se ka fɔ ka ɲɛ, ka tɛmɛn production web kan.
Stable roll winding ani web flatness bɛ balo dafalen dɛmɛ, ka tension control ani ka blister-machine baara kɛ ka taa a fɛ.
Fura jɛlenw PVC ka kan ka lajɛ ni nɔgɔ, sisi, nɔgɔ nɛrɛma, jeli, sɔgɔsɔgɔninjɛ ani nafamafɛn wɛrɛw tɛ minnu bɛ se ka nɔ bila ɲɛnayeli la walima a foroko dafalenw yecogo la.
Tensile, impact ani masinko wajibiyalen wɛrɛw ka kan ka ɲɛfɔ ni sɛgɛsɛgɛli fɛɛrɛ ye min bɛ kɛ, yɔrɔ minnu na u nafa ka bon kosɛbɛ kiliyan ka blister jiginni taabolo la.
Fura sanbagaw ka kan ka furakɛli sɛbɛnw, monomɛri tolenw, jiginni ani taayɔrɔ-sɔgɔli wajibiyalenw dɔn minnu bɛ tali kɛ PVC hakɛ tigitigi la sanni u k’u jigi da 'fura hakɛ' ɲɛfɔli jɛlen dɔrɔn kan.
Fɛn dilanbagaw ka setigiya ka kan ka sinsin sɛbɛnw kan minnu bɛ tali kɛ fɛn dilannen suguya tigitigi ni a dilanni kulu la. Sannikɛlaw ka kan ka fɛɛrɛko ni sariyasɛbɛnw wajibiyalenw ɲɛfɔ sani u ka sɔn jagofɛnw feereli ma.
Wallis ɲɛ min bɛ yen sisan, o bɛ nin PVC ɲɛfɔli sɛbɛn in di. Sannikɛlaw ka kan k’a jira ko seere bɛ tali kɛ PVC kalasi tigitigi ni batch sanni na.
Ɲɛ min bɛ sen na sisan, o fana bɛ PVDC ka kunnafonisɛbɛn dɔ sɔrɔ. Ikomi fura min bɛ nin ɲɛ in kan, o ye fɛn gɛlɛn gansan ye PVC , nin PVDC sɛbɛn in ka kan ka jate i n’a fɔ fɛn min bɛ tali kɛ a la dɔrɔn, wa a man kan ka jate i n’a fɔ COA min bɛ kɛ fɛn gansan PVC la.
Aw bɛ fɛn in boli ni fɛn dilannikɛlan yɛrɛ ye ani a pakew dilanni masin walasa ka dingɛ cogoya, kogo finman, ɛntɛrinɛti kɛcogo ani ɲɛnayeli nafama jateminɛ.
Aw bɛ baara kɛ ni fɛn dilanni datugulan ye walasa ka sigili-funteni, degun ani sigi waati finɛtiri nafama dɔn.
Aw bɛ unwinding, web tracking, feeding, forming, sealing ani cutting lajɛ ni jagokɛcogo teliya jiralen ye.
PVC gansan ka kan ka sɔn dɔrɔn yɔrɔ min na foroko dafalen bɛ furakɛlifɛn sabatili wajibiyalenw dafa minnu sɛgɛsɛgɛra, a maracogo wajibiyalenw kɔnɔ.
Baro bɛ se ka kɛ a bonya kan fɛn dilanni hakɛ la min bɛ sɔrɔ ka kɛɲɛ ni kɔnɔna jateminɛ ye, a gɛlɛya ani a blister-machine wajibiyalenw.
Rollo bonya bɛ se ka tigɛ ka kɛɲɛ ni blister labɛncogo ye ani minɛnw cogoya ye sɛnɛfɛnw dilanni bonya sɔrɔlen kɔnɔ.
PVC jɛlen, tintin, kulɛri ani opaque bɛ se ka baro kɛ ka kɛɲɛ ni fɛn dilannenw yecogo ni u taamasiyɛn wajibiyalenw ye.
Glossy, matte ani poroze kɛrɛnkɛrɛnnenw ka surface requirements bɛ se ka jateminɛ ka kɛɲɛ ni optique yecogo ye ani downstream processing ye.
Core diameter, roll long, maximum roll diameter, roll weight, winding direction ani pakew bɛ se ka fɔ ka kɛɲɛ ni kiliyan ka layini ye.
Aw bɛ a dɔn ni furakisɛw, furakisɛw, balofɛnw, baganw ka furaw walima a tata hakɛ wɛrɛ bɛ kurukuru kɔnɔ ani ka ji, oksizɛni walima yeelen dɔnta jira.
Aw bɛ filimu janya wajibiyalen di walima a ɲɛfɔcogo min bɛ kɛ aw ka kurukuru sira kan sisan.
Aw bɛ rollo bonya, a bonya muɲuni, a kɔnɔna cɛmancɛ, a kurukuru hakɛ maksimali ani a wulicogo ɲɛfɔ.
Aw bɛ a dilabaga, a modɛli, a foroko suguya ani a dilanni teliya normal di walasa ka dɛmɛ don fɛnw jateminɛni na.
Aw bɛ furakisɛ walima furakisɛ hakɛ ni a kɔnɔna janya, a bonya ani a jugumanba fara a kan ni a bɛ sɔrɔ yɔrɔ minnu na.
Aw bɛ datugulan papiye ni funteni-sigilan minnu bɛ kɛ sisan, aw bɛ olu dɔn walasa sigicogo bɛnkan ka se ka jateminɛ.
Aw bɛ kulɛri jɛlen, tinted walima opaque fɔ ka fara glossy, matte walima surface wajibiyalen wɛrɛw kan.
Aw bɛ taayɔrɔ suguya ni furakɛli ɲinini wajibiyalenw di, jiginni, monomɛri tolen, DMF walima kiliyan kɛrɛnkɛrɛnnenw ka sɛbɛnw wajibiyalenw.
Wallis ka fɛn dilannenw kunnafoniw sisan, olu bɛ MOQ danmadɔ jira min bɛ kilo 500 ɲɔgɔn bɔ. Kɔrɔbɔli-koman sɔrɔli, free-sample politiki ani MOQ laban ka kan ka dafa ka kɛɲɛ ni a bonya, a bonya, a kulɛri ani a dilanni waati bolodacogo ye.
Furakɛcogo kurukuruw dilanni tuma bɛɛ bɛ a ɲini ka fɛnw girinya kɔlɔsi, u sanfɛla cogoya, u kurukuruni ni u dilanni kɛcogo. Sannikɛla minnu bɛ fɛn dilanbaga kɔrɔ dɔ bila a nɔ na, olu ka kan ka PVC filimu kura suma ni a kɔnɔna dilancogo kelen ye, ni datugulan papiye ani a dilanni cogoyaw ye sani u ka sɔn.
Furakɛcogo PVC Sɛnɛfɛnw dilanni sira
Furakɛcogo pakew sɛgɛsɛgɛli laboratuwari
Wallis bɛ furaw foroko caman tigɛlikɛlaw ni izini sannikɛlaw dɛmɛ ni PVC hakɛw ye minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ni roll specifications ye, kulɛriw yiriwali, samples ani exportation pakew ka kɛɲɛ ni poroze ka ɲininiw ye.
Farmasi rigid PVC ye thermoformable forming web ye min bɛ kɛ ka dingɛw dilan furakisɛw, furakisɛw ani fɛn wɛrɛw la minnu bɛnnen don kurukuruw foroko kɔrɔlenw kɔnɔ.
A janya bɛnnen bɛ bɔ fura hakɛ la, a kɔnɔna juguya la, a masin na ani a kurukuruw gɛlɛyali wajibiyalen na. Wallis bɛ milimɛtɛrɛ 0,15–0,80 ɲɔgɔn di sisan, k’a sɔrɔ pakew jateminɛlan tigitigi ka kan ka sugandi ni a dilanni sɛgɛsɛgɛli ye.
Wallis ka ɲɛfɔli min bɛ sen na sisan, o bɛ bonya jira fo ka se milimɛtɛrɛ 680 ɲɔgɔn ma. Slitting customized bɛ se ka baro kɛ ka kɛɲɛ ni blister-machine ani web-layout wajibiyalenw ye.
Plain PVC bɛ jisigiyɔrɔ danmadɔ di ni i y’a suma ni furakɛlicogo kɛrɛnkɛrɛnnenw ye minnu barika ka bon. A ka ca a la, a bɛ sugandi yɔrɔ min na furakɛli sabatili wajibiyalenw bɛ se ka dafa ni PVC kurukuru kɔrɔlen ye.
Ayi, ji minɛcogo bɛ ji min minɛ o fɛn yɛrɛ fɛ, o ɲɛfɔ. Fura foroko dilanni ji barika bɛ jateminɛ ka ɲɛ ni WVTR ye ani pake dafalenw sabatili funteni ni nɛnɛ cogoya ɲɛfɔlenw na.
Plain PVC bɛ jɛya, gɛlɛya ani thermoformability di. PVC /PVDC bɛ PVDC barikalan dɔ fara a kan min bɛ ji ni oksizɛni lakanani ɲɛ kosɛbɛ furaw dilanni na minnu ka gɛlɛn kosɛbɛ.
Fura minnu bɛ ji sɔrɔ kosɛbɛ walima minnu bɛ fɛn wɛrɛw ɲini, olu bɛ se ka kɛ sababu ye ka barikalan barikama dɔ wajibiya i n’a fɔ PC filimu min sinsinnen bɛ TFE kan walima aliminiyɔmu nɛnɛma. Sugandili ka kan ka da furakɛli sabatili kunnafoniw kan ani pakew dilanni kan.
Furakɛcogo kɔrɔlen aliminiyɔmu datugulan bɛ se ka kɛ ni funteni-sigilan ye min dilannen don walasa ka siri PVC la . Foyi, lakɛri ani PVC faralen ɲɔgɔn kan tigitigi ka kan ka sɛgɛsɛgɛ ɲɔgɔn fɛ walasa ka jagokɛla ka sigilan finɛtiri sigi sen kan.
Karamɔgɔ bɛnnenw bɛ se ka jateminɛ walasa ka kurukuruw dilan teliya la, nka bɛnkan bɛ bɔ masin tigitigi la, filimu janya la, a funteni cogoya la, a kɔnɔna jateminɛcogo la, a kurukuruw cogoya la ani a datugucogo la.
PVC gɛlɛn bɛnnen bɛ se ka jateminɛ ni foroko fɛɛrɛ fila bɛɛ ye. Ikomi u ka funteni ni u dilanni cogoya tɛ kelen ye, setigiya ka kan ka dafa jagokɛminɛnw kan minnu laɲininen don.
Awɔ. Sugandili minnu bɛ kɛ kɛnɛ kan, minnu ɲɛ ye ɲɛgɛn ye, minnu ɲɛw ye ɲɛgɛn ye ani minnu tɛ ye, olu bɛ se ka baro kɛ ɲɔgɔn fɛ ni fɛn ɲɛnamaw ye minnu bɛ yeelen bɔ, minnu ɲɛ ye bulama ye ani minnu bɛ kɛ yɔrɔ wɛrɛw la.
Kulɛri dɔrɔn tɛ furakɛli yeelen lakanani jira. Fɛn minnu bɛ yeelen bɔ, olu ka kan ka jikuru janya ni a jiginni hakɛ min bɛ bɛn o ma, o ɲɛfɔ, wa pake dafalen ka kan ka tiɲɛ ka kɛɲɛ n’o ye.
Furakɛcogo-minɛnw foroko sterili bɛ a ɲini ka fɛn dilannenw, u datugucogo, u sigicogo dafalen, u sterilicogo ani furakɛli-minɛnw foroko wajibiyalenw tiɲɛni danfaralen. A man kan ka jate ko a bɛnnen don ka bɔ furakɛli daɲɛ PVC dɔrɔn na.
Ka kɛɲɛ ni aw ka seko ni dɔnko siratigɛ ye, aw bɛ fɛɛrɛko kunnafonisɛbɛn ɲini, COA batch ani furakɛli sɛbɛnw, jiginni, monomɛri tolen, sariyasun walima kiliyan kɛrɛnkɛrɛnnenw ka sɛbɛnw ɲini PVC hakɛ tigitigi kama.
Wallis kunnafoni minnu bɛ yen sisan, olu bɛ MOQ danmadɔ jira min bɛ kilo 500 ɲɔgɔn bɔ. MOQ laban ni kɔrɔbɔli-sɛbɛn sɔrɔli bɛ bɔ a bonya, a bonya, a kulɛri, a sanfɛla ani a dilanni waatibolodacogo la sisan.
Awɔ. Sɛgɛsɛgɛli bɛ kɛ misali la walasa ka thermoforming, aluminiyɔmu-datugulan bɛnkan, masinw bolicogo, dingɛw cogoya ani fɛnw cogoya sanni ka sɔn jagofɛnw ma.
Aw bɛ furakɛlifɛn di, PVC a janya, a kurukuru bonya, a kɔnɔna hakɛ, a kulɛri, a sanfɛla laban, a blister-machine model, a kɔnɔna hakɛw, aliminiyɔmu datugucogo ɲɛfɔli, sariyaw ka wajibiw ani a sanni hakɛ jateminɛlen.
Aw ye aw ka PVC janya, rollo bonya, blister-machine model, cavity dimensions, color, lidding foil ani sanni hakɛ makɔnɔnen ci Wallis ma. An bɛ se ka baro kɛ PVC forming film gɛlɛn kan furakisɛ, furakisɛ, balofɛnw ani furakɛli kurukuruw foroko kama.
Ni aw bɛ furakɛli PVC feerela dɔ bila a nɔ na min bɛ yen, aw bɛ TDS, COA walima reference roll min bɛ sen na sisan, aw bɛ o di walasa a bonya, a jɛlen, a thermoforming, sealing ani machine-running requirements ka se ka jateminɛ sani a ka kɛ caman ye.
