Sesẽ Embossed Diamond Textured Polycarbonate Agbalẽvi | PC Panels ƒe agbɔsɔsɔme si wodzrana

Solid Embossed Diamond Textured Polycarbonate Sheets nye dzoxɔxɔ ƒe aŋɔ siwo wɔa dɔ nyuie eye woƒe akpa si wotsɔ daimond wɔe si to vovo si naa atsyɔ̃ɖoɖo, nɔa anyi didina, kple kekeli ƒe kaka nyona ɖe edzi. Wowɔe tso 100% ɖetugbui leaƒe polycarbonate aŋɔ, agbalẽ siawo ƒo PC sesẽ ƒe ŋusẽ nu ƒu kple atsyã ƒe anyigba ƒe nɔnɔme hena zazã le mɔ vovovowo nu le xɔtutu, ememe nɔnɔme, dzesiwo, kple bubuwo me.

Nu	100% yeye polycarbonate resin.
Kekeme	1220mm, 1560mm, 1820mm, 2100mm, alo woate ŋu atsoe abe wò hiahiã ene.
Didime	5800mm, 6000mm, alo woate ŋu atsoe. Seɖoƒe aɖeke meli o.
Eƒe titrime	1.0mm-20mm ƒe didime
Amadede	Eme kɔ, amadede dzẽ, opal, akɔbli, blɔ, aŋutiɖiɖi, dzĩ

Nɔnɔmewo	Nu ɖeka	Na
Ŋusẽ si wòkpɔna ɖe ame dzi	J/m	88-92 me
Kekeli ƒe kaka	% .	50
Tsɔ Nuheŋusẽ Gblɔe	g/m	1.2
Elongation le ɖiɖiɖemeɣi	% .	≥130 ƒe xexlẽme
Coefficient dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ	mm/m°C ƒe didime	0.065
Subɔsubɔdɔ ƒe dzoxɔxɔ	°C	-40°C ~ + 120°C
Dzoxɔxɔ le mɔ si akplɔa nu	W/m²°C	2.3-3.9
Ŋusẽ si le ame ŋu be wòabɔbɔ	N/mm⊃2 ƒe ƒuƒoƒo;	100
Modulus ƒe elasticity	Mp	2400
Tensile ƒe ŋusẽ	N/mm⊃2 ƒe ƒuƒoƒo;	≥60 ye nye ema
Gbeɖiɖi ƒe dzesidenu si me gbeɖiɖi mele o	dB	35 decibel ɖiɖi na 6mm sesẽ agbalẽ

Sesẽ Embossed Diamond Textured Polycarbonate agbalẽwo

Viɖe siwo le Polycarbonate-gbadzɛ Siwo Wotsɔ Diamond Siwo Woŋlɔ Nu Sesẽe Ŋu

Viɖe siwo le Solid Embossed Diamond Textured Polycarbonate Sheets zazã le xɔtutu me me lolo eye woto vovo, si wɔe be wonye tiatia si hea xɔtuɖaŋunyalawo kple xɔtulawo. Viɖe siawo dometɔ aɖewoe nye:

Atsyã ƒe Trɔtrɔ Ðe Nɔnɔmewo Ŋu : Woate ŋu aƒle agbalẽ siawo le lolome, titrime, kple amadede vovovowo me, si naa ablɔɖe xɔtuɖaŋunyalawo kple aɖaŋuwɔlawo be woawɔ xɔtunu tɔxɛ siwo dzea ame ŋu le atsyɔ̃ɖoɖo gome.

Woƒe kpekpeme le bɔbɔe : Esi agbalẽ siawo le bɔbɔe wu ahuhɔ̃e ta la, wo tsɔtsɔ, wo ŋudɔwɔwɔ, kple wo dede le bɔbɔe, si wɔnɛ be dɔwɔlawo kple ʋuɖoɖo ƒe gazazãwo dzi ɖena kpɔtɔna.

Ease of Installation : Woate ŋu atso Solid Embossed Diamond Textured Polycarbonate Sheets bɔbɔe, awɔ woƒe nɔnɔme, ahade wo eme, si ɖea ɣeyiɣi si woatsɔ aɖoe kple dɔwɔlawo ƒe hiahiã dzi kpɔtɔna.

Nusiwo nɔa anyi didina : Agba siawo nɔa anyi didina ŋutɔ, eye wonɔa agbe didi. Woate ŋu anɔ te ɖe yame ƒe nɔnɔme sesẽwo, siwo dometɔ aɖewoe nye tsidzadza, tsikpe, kple ya sesẽwo nu.

Ŋusẽzazã Nyuie : Dzoxɔxɔnutsitike nyui siwo le agbalẽ siawo ŋu kpena ɖe ŋusẽzazã dzi ɖeɖe kpɔtɔ ŋu le dzoxɔxɔ kple fafa siaa me.

Polycarbonate-gbadzɛ Siwo Wotsɔ Diamond Siwo Woŋlɔ Ðe Nu Sesẽe Ŋudɔwɔwɔ

Solid Embossed Diamond Textured Polycarbonate Sheets kpɔ dɔwɔwɔ vovovowo le akpa vovovowo me. Zãzã ɖedzesi aɖewo dometɔ aɖewoe nye:

Dziŋgɔli ƒe akaɖiwo : Woƒe kekeli ƒe kaka ƒe ŋutetewo na wosɔ nyuie na dziŋgɔli ƒe akaɖiwo, si wɔnɛ be dzɔdzɔmekekeli te ŋu yɔa teƒe siwo le eme, si wɔnɛ be kekeli nyuiwo nɔa teƒe siwo wokpea ame.

Akɔtaɖonuwo : Wozãa agbalẽ siawo zi geɖe le xɔtaxɔwo tutu me, si naa bebeƒe esime wòléa seselelãme si le ʋuʋu ɖi eye wòdzena me ɖe asi, si sɔ nyuie na gota teƒe siwo woxe.

Dzodoƒe : Esi woƒe UV te ŋu nɔa te ɖe UV nu eye kekeli ƒe kaka ƒe nɔnɔmewo le agbalẽ siawo ŋu ta la, wosɔ nyuie na dzoxɔxɔnamɔ̃wo zazã, si wɔnɛ be nɔnɔme nyuitɔ kekeake nɔa anyi na numiemiewo ƒe tsitsi.

Gli Siwo Mãa Ememe : Woate ŋu azã agbalẽ siawo atsɔ awɔ gli siwo wotsɔ mãa ememe siwo dzea ame ŋu eye wowɔa dɔ nyuie le asitsaƒewo kple aƒewo me, si ana kekeli nate ŋu atso esime wole ame ŋutɔ ƒe nyawo me tom.

Atriums : Atriums kpɔa viɖe tso Solid Embossed Diamond Textured Polycarbonate Sheets ƒe atsyɔ̃ɖoɖo kple woƒe anyinɔnɔ didi me, si naa teƒe wɔnuku aɖe si woate ŋu akpɔ nu le le xɔwo me eye wònana dzɔdzɔmekekeli ɖoa xɔa ƒe dzime.

Embossed Diamond Textured PC Sheet ƒe dɔwɔwɔ

Nukatae Nàtia Wallis Polycarbonate-gbadzɛwo?

• Wowɔe to  extrusion mɔ̃ɖaŋununya deŋgɔ zazã me  hena nyonyome si nɔa anyi ɖaa.

• 100% virgin raw material , kakaɖedzi be eme kɔ wu eye agbenɔƒe didi wu.

• Dimension siwo woate ŋu atrɔ asi  le li na nudɔdɔ gbogbo aɖewo.

• vevie  Woalé ŋku ɖe eƒe nyonyome ŋu  hafi woatsɔe vɛ.

• Dɔnyala bibiwo ƒe  kpekpeɖeŋunana le nudzadzra megbe  kple mɔ̃ɖaŋununya ƒe mɔfiame.

Exɔ ŋkɔ le asisiwo dome le xexeame katã

Dɔwɔƒea ƒe gbesiagbedɔwo

Asitsalawo ƒe nyaŋuɖoɖo

Nya Siwo Wobia Enuenu

Q1: Ðe woate ŋu azã polycarbonate-gba sia le gota le yame ƒe nɔnɔme sesẽwo mea?

A: Ɛ̃. Wotrɔ asi le polycarbonate-gbadzɛ siwo ŋu wotsɔ daimɔnd-ti sesẽ wɔe ŋu be woate ŋu anɔ te ɖe UV keklẽ kple dzoxɔxɔ si gbɔ eme nu tso −40 °C va ɖo +120 °C, si wɔe be wosɔ na gota nuwo ɖoɖo. 

Q2: Ðe woate ŋu atrɔ asi le agbalẽa ƒe lolome kple amadede ŋua?

A: Kakaɖedzitɔe. Àte ŋu atrɔ asi le eƒe titrime, kekeme, didime, kple amadede ŋu be wòasɔ ɖe wò dɔa ƒe nudidi tɔxɛwo nu.

Q3: Aleke diamond ƒe nɔnɔme si woŋlɔ ɖe edzi la kpena ɖe ame ŋui?

A: Daimɔnd ƒe nɔnɔmea naa atsyɔ̃ɖoɖo ƒe nu léa dzi na ame, enaa xɔa ƒe sesẽme nyona ɖe edzi, eye wòkakaa kekeli be wòaɖe keklẽ dzi akpɔtɔ eye wòana kekeli gɔ̃ hã nadze. 

Q4: Ðe agbalẽ siawo ate ŋu axɔ ɖe glass teƒe le xɔtuɖaŋudɔwo mea?

A: Ɛ̃. Wole bɔbɔe wu, womete ŋu ƒoa wo nu ƒu o, eye wo ɖoɖo le bɔbɔe wu ahuhɔ̃e esime wole nukpɔkpɔ ƒe dɔwɔwɔ nyuie me. 

Q5: Ðe agbalẽ siawo dede le bɔbɔea?

A: Ɛ̃. Le woƒe kpekpeme si le bɔbɔe eye woate ŋu atrɔ ɖe nɔnɔmewo ŋu ta la, eɖoɖo le bɔbɔe wu eye wòwɔa dɔ kabakaba wu ne wotsɔe sɔ kple ahuhɔ̃e alo nu kpekpe siwo wozãna tsã.