|
PC/PMMA ƒe Dɔwɔha si Wowɔ Ðekae
Wallis ye nye esia
| Amadede: | |
|---|---|
| Titrime: | |
| Dɔwɔwɔ: | |
| Viɖe: | |
| Agbɔsɔsɔ: | |
PC /PMMA ƒe agbalẽ si wotsɔ ƒo ƒui nye aŋekotoku si me wotsɔa polycarbonate (PC) si wɔa dɔ ɖe ame dzi ŋutɔ kple polymethyl methacrylate (PMMA) si sesẽ wu ƒe anyigba ƒoa ƒui. Xɔtuɖoɖo sia da sɔ le ŋusẽkpɔɖeamedzi ƒe ŋusẽ, nukpɔkpɔ ƒe dzedzeme, ʋuʋudedi ƒe tsitretsitsi kple dɔwɔwɔ le nu ɖeka si ƒe kpekpeme le bɔbɔe me.
Wallis naa PC/PMMA composite board si me kɔ na ɖeɖefia ƒe nutsyɔnuwo, dɔwɔnuwo ƒe fesrewo, ʋu ƒe eme akpawo, elektrɔnik mɔ̃dzikpɔƒewo, asitsaƒewo ƒe nuzazãwo kple dɔ bubu siwo hiã na anyigba si nɔa anyi didina, si ŋu kɔklɔ le bɔbɔe eye tsi mate ŋu age ɖe eme o. Titrime si woɖo ɖi si woɖe fia le axa sia nye milimeta 1.5 ; custom thicknesses, sheet sizes kple colors li le dɔa ƒe nudidiwo nu.
PMMA mo naa anyigba si klẽna, si me kɔ nyuie le nukpɔkpɔ me, si ƒe sesẽme le dzɔdzɔme nu eye wòte ŋu trɔna ɖe yame ƒe nɔnɔme ŋu nyuie wu PC si womefa o. Ekpena ɖe akpata si wowɔ vɔ ŋu be wòatsi tre ɖe ʋuʋudedi siwo wowɔna edziedzi ŋu eye wòléa eƒe dzedzeme ɖe te le dɔ siwo ŋu wowɔa dɔ le enuenu me.
Polycarbonate ƒe nuto la kpena ɖe sesẽ, bending dɔwɔwɔ kple tsitretsitsi ɖe afɔku ƒe ƒoƒo ŋu. Ne wotsɔe sɔ kple PMMA ɖeɖeko zazã la, xɔtunu si wotsɔ ƒo ƒui la megbãna bɔbɔe o eye wòle bɔbɔe be wòatrɔ ɖe ametakpɔnu kple atsyɔ̃ɖonu siwo bia nu geɖe ŋu.
Vevietɔ: sesẽ mamlɛtɔ, UV ƒe anyinɔnɔ, kekeli ƒe kaka, wɔwɔ ƒe dɔwɔwɔ kple atikewo ƒe tsitretsitsi nɔ te ɖe grade si wotia, ƒuƒoƒo ƒe sɔsɔme, titrime kple sesẽ ɖesiaɖe si woate ŋu atia dzi. Kpɔ dodokpɔmɔnu si hiã kple taɖodzinu ƒe asixɔxɔ dzi hafi nàwɔ nudɔdɔ gbogbo aɖe.
PC/PMMA ƒe Agbalẽvi si me kɔ
| Nusiwo Wozãna ƒe | Nyatakakawo |
|---|---|
| Adzɔnu Ƒomevi | PC/PMMA ƒe ƒuƒoƒo ƒe ʋuƒo |
| Nusiwo Wozãna ƒe Dɔwɔɖoɖo | Polycarbonate (PC) ƒe nuto si me PMMA ƒe anyigbadzinu le |
| Dzidzenu ƒe Titrime | 1.5 mm |
| Dekɔnu ƒe Titrime | Woate ŋu akpɔe ne wobiae |
| Agbalẽvi ƒe Agbɔsɔsɔme | Woate ŋu atrɔ asi le eŋu le nutata alo nudɔdɔ ƒe nudidi nu |
| Amadede | Edzena le gaglãgbe alo wowɔe ɖe ɖoɖo nu |
| Anyigbadzi Nuwuwu | Glossy / si me kɔ |
| Dɔwɔwɔ Vevietɔ | Scratch resistant, tsi mate ŋu age ɖe eme o, impact resistant kple UV-stable grade li |
| Dɔwɔwɔ ƒe Mɔnuwo | Lãɖeɖe, tomekuku, CNC mɔ̃wo kple bending |
| Zã Nutoa Me | Xɔme zazã; gota zazã kple UV-tsitretsitsi ƒe dzesi si sɔ |
| OEM / ODM ƒe dɔwɔwɔ | Wodo alɔe |
| Kpɔɖeŋunu | Woate ŋu akpɔe ɖa be woatsɔ adzro nusiwo woatsɔ awɔ dɔe me |
PMMA ƒe anyigba kpena ɖe ame ŋu be woaɖe ʋuʋudedi si woate ŋu akpɔ tso asiléle kple dzadzɛnyenye si sɔ gbɔ dzi akpɔtɔ. Le nutsyɔnu ƒe ŋkumeɖonu alo mɔ̃ siwo dzi wokpɔna gome la, gblɔ pɛnsil-sesẽ alo abrasion-dodokpɔ ƒe dzidzenu si hiã ale be woate ŋu atsɔ dzesidea asɔ kple dɔdamɔnua.
PC ƒe nuto la xɔa ŋusẽkpɔɖeamedzi nyuie wu nu siwo me kɔ siwo megbãna o, si kpena ɖe ame ŋu be woaɖe gbagbã kple gbagbã dzi akpɔtɔ le ewɔwɔ, eɖoɖo kple subɔsubɔ me. Esia na be agbalẽ si wotsɔ ƒo ƒui la nye tiatia nyui aɖe le afisi wòhiã be wòadze abe ahuhɔ̃e ene eye wòasesẽ nyuie wu siaa.
Plastik si me ʋuʋudedi mele o la mexɔa tsi o eye woate ŋu atutui. Ne èdi be yeakpɔ dɔlékuiwutikewo, atike siwo wotsɔna tsia amee, dze si wotsɔna ƒua gbe alo atike siwo wotsɔna klɔa nu ŋu vevie la, bia be woado atike siwo sɔ kple wo nɔewo kpɔ hena atike si tututu woatsɔ aklɔe kple ɣeyiɣi si woatsɔ aƒoe.
Nusiwo wotsɔ wu enu siwo me kɔ eye wole keklẽm la doa alɔ ɖeɖefia takpɔkpɔ, atsyɔ̃ɖoɖo ƒe akpawo kple akpa siwo wota. Woate ŋu ada amadede, agbalẽtata, mɔ̃ kple nɔnɔmewɔwɔ ƒe nudidi siwo wowɔ ɖe ɖoɖo nu la akpɔ tso nɔnɔmetatawo alo akpa siwo wowu enu ƒe kpɔɖeŋuwo me.
Le gota dzesiwo, ʋuɖoɖo alo xɔtuɖaŋu ƒe akpawo gome la, tia dzesi si UV-si li ke le yame ƒe nɔnɔme si wokpɔ mɔ na, ɣeyiɣi si woatsɔ akpɔe kple amadede ƒe tɔtrɔ ƒe nudidi nu. Ele be woaɖo kpe gota gome ƒe nyonyo dzi le dɔa ƒe nɔnɔmetatawo nu tsɔ wu be woasusui tso nusiwo wotsɔ wɔe ƒe ƒomevi ɖeɖeko me.
PC/PMMA Composite Board ƒe Dɔwɔwɔ kple Dzedzeme
Esɔ na ɖeɖefia ƒe nutsyɔnu lens, dɔwɔnu-ƒuƒoƒo nutsyɔnu, titina-console panels kple atsyɔ̃ɖoɖo trim afisi nukpɔkpɔ ƒe dzedzeme, ŋusẽkpɔɖeamedzi tsitretsitsi kple asikaka anyigba si nɔa anyi didina le vevie.
Wozãnɛ na mɔ̃dzikpɔƒe ƒe fesrewo, dɔwɔnuwo takpɔkpɔ, dɔwɔnuwo ƒe nutsyɔnuwo kple ŋkɔdzesiwo. Woate ŋu atsɔ CNC dowo, ʋɔtruwo, lãɖeɖewo kple nɔnɔmetata siwo wota asɔ kple asisi la ƒe mɔ̃ɖaŋununya ƒe nɔnɔmetata.
Nusiwo me kɔ, agbalẽtata kple ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ ƒe ƒuƒoƒo doa alɔ touch-panel covers, appliance control surfaces, smart-home panels kple electronic display windows.
Anyigba si le keklẽm kple dɔwɔwɔ si ŋu kɔ bɔbɔe la sɔ na adzɔnuwo ƒe ɖeɖefiawo, dzesiwo, mamawo, agbalẽdzraɖoƒe ƒe akpawo kple atsyɔ̃ɖoɖo ƒe akpa siwo woɖe ɖe go ne wozã wo enuenu.
Woate ŋu abu UV-stabilized grades ŋu na gota dzesi siwo wokpɔ ta na, ʋu ƒe emenuwo, ƒudziʋua ƒe akpa aɖewo kple dɔ mawo tɔgbe. Ele be woaɖe yame ƒe nɔnɔme dodokpɔ si hiã, dzo ƒe dzidzedzekpɔkpɔ kple subɔsubɔ-dzoxɔxɔ ƒe didime gɔme le nusiwo woatsɔ awɔe tiatia me.
PC / PMMA Composite Board Dɔwɔɖoɖo siwo bɔ
| Tiatia ƒe Nu | PC/PMMA Composite | Standard PC | PMMA | Glass |
|---|---|---|---|---|
| Tsitretsitsi ɖe Ŋusẽkpɔɖeamedzi Ŋu | Kɔ | Kɔ | Ebɔbɔ wu PC | Brittle le eƒe ŋusẽkpɔɖeamedzi te |
| Anyigba ƒe Ʋuʋu ƒe Tsitretsitsi | Enyo wu PC si wozãna ɖaa; grade si dzi woanɔ te ɖo | Ðe anyi ɖe anyi evɔ womatsɔ nu sesẽ aɖeke atsyɔ edzi o | Enyo | Enyo ŋutᴐ |
| Kpekpeme | Eƒe kpekpeme le bɔbɔe | Eƒe kpekpeme le bɔbɔe | Eƒe kpekpeme le bɔbɔe | Kpekpem |
| Nuwɔwɔ Kple Mɔ̃ɖaŋudɔwɔwɔ | Enyo; ɖo kpe bend kple wɔwɔ radius dzi | Enyo | Le ve dome; brittle wu | Seɖoƒe li na eye wònye etɔxɛ |
| Yame ƒe nɔnɔme ƒe ŋutete | Enyo kple UV ƒe dzesi si sɔ | Zi geɖe la, UV takpɔkpɔ hiã | Le dzɔdzɔme nu la, enyo | Enyo |
| Nusi Sɔ Nyuitɔ Kekeake | Ŋusẽkpɔɖeamedzi kpe ɖe premium anyigba ƒe dzedzeme ŋu | Akpa siwo me kɔ siwo ŋu wotsia dzi ɖo be woakpɔ ŋusẽ ɖe amewo dzi | Eme kɔ nyuie kple yame ƒe nɔnɔme ƒe ŋutete | Anyigba ƒe sesẽ kple sesẽ si sɔ gbɔ wu |
Nuwo tsɔtsɔ sɔ kple wo nɔewo nye mɔfiame si ku ɖe nusiwo woatsɔ atia wo ŋu le mɔ gbadza nu. Dɔwɔwɔ ŋutɔŋutɔ toa vovo le resin ƒe grade, titrime, layer ratio, coating kple dodokpɔ mɔnu nu.
Dimensions: custom titrime, kekeme, didime kple lãɖeɖe-to-lolome agbalẽwo.
Amadede kple dzedzeme: amadede si me kɔ, si wowɔ ɖe ɖoɖo nu eye wòwu enu wòklẽna.
Fabrication: precision lãɖeɖe, drilling, CNC dowo, slots kple nɔnɔme tɔxɛwo.
Nuwɔwɔ: akpa siwo wobɔbɔ alo wowɔ le woƒe titrime, woƒe didime kple nukpɔkpɔ ƒe nudidiwo nu.
Takpɔkpɔ le anyigba dzi: ametakpɔnu masking film na ʋuɖoɖo kple anyime dɔwɔwɔ.
OEM / ODM: nu kple fabrication kpekpeɖeŋu si wotu ɖe kpɔɖeŋuwo alo mɔ̃ɖaŋununya ƒe nɔnɔmetatawo dzi.
Dzro Wò Nyatakaka Siwo Wowɔ Ðe Edzi Me
Gblɔ nenye be wozã akpaa le xɔ me alo gota eye nàde dzesi ɣe ƒe keklẽ, tsi, dzadzɛnyenyenuwo, atikewo, dzoxɔxɔ, vuvɔ kple asikaka eŋu enuenu. Esiae afia nenye be ehiã be woawɔ UV ƒe liƒo alo atike si woatsɔ awɔ dɔe koŋ le anyigba dzi.
Le esi teƒe be nàbia 'tsitretsitsi ɖe ʋuʋudedi ŋu ko,' na lɔlɔ̃ ɖe edzi ƒe dzidzenu siwo woate ŋu adzidze abe pencil ƒe sesẽme, Taber ƒe ʋuʋu, kekeli ƒe kaka, ahomya, ŋusẽkpɔɖeamedzi dodokpɔ, UV-tsitsi gaƒoƒo, didime ƒe mɔɖeɖe ɖe nu ŋu alo dzo ƒe dzidzedzekpɔkpɔ.
Ðo lolome si wowu enu, eƒe titrime, mɔɖeɖewo, dowo, nugbɔ ŋuti nyatakakawo, bending radius, wɔwɔ goglome, agbalẽtata mɔnu kple kpekpe ƒe ɖoɖo ɖa. Nyatakaka siawo kpena ɖe ame ŋu be woada gbagbã, nukpɔkpɔ ƒe tɔtɔ kple didime ƒe liƒo kpɔ hafi woawɔe.
Do kpɔɖeŋua kpɔ le dɔwɔwɔ kple subɔsubɔ ƒe nɔnɔme ŋutɔŋutɔwo me. Le dɔ veviwo gome la, milɔ̃ ɖe kpɔɖeŋu si dzi woda asi ɖo, ŋkuléleɖenuŋu ƒe mɔnu kple seɖoƒe siwo dzi woaxɔ wo dzi hafi aɖo kpe ewɔwɔ le agbɔsɔsɔ gã me dzi.
Wallis zãa dɔwɔnu siwo wotsɔ wɔa nu kple esiwo wotsɔ léa ŋku ɖe nu ŋu tsɔ kpɔa eƒe dzedzeme kple dɔwɔwɔ dzi. Le nɔnɔme si dzi wolɔ̃ ɖo nu la, dodokpɔ ate ŋu anye agbalẽa ƒe didime, anyigba ƒe dzedzeme, eƒe kaka kple afu, abrasion nuwɔna, UV yame ƒe nɔnɔme kple nubablɛ ƒe nɔnɔme.
Gbeƒãɖeɖe & Haze
Taber Abrasion Dodokpɔmɔ̃
Dze Si Wotsɔna Kpɔa Dzee
UV Yame ƒe Nɔnɔme Dodokpɔ
Nufamɔ̃ ƒe Fli
Ametakpɔnu Si Wotsɔ tsyɔa Nui ƒe Film
Ametakpɔnu ƒe Nubablɛwo
Ewɔwɔ si li ke: extrusion mɔ̃ɖaŋununya deŋgɔ doa alɔ agbalẽ ƒe nyonyome si mewɔa tɔtrɔ o na nudɔdɔwo gbugbɔgawɔ.
Ðetugbui leaƒe ƒe nu xoxowo: aŋɔ tiatia aɖewo kpena ɖe ame ŋu be eme kɔ, eƒe dzedzeme kple dɔwɔwɔ ƒe ɖekawɔwɔ nanɔ anyi.
Custom manufacturing: didime, amadede kple downstream fabrication ate ŋu asɔ kple dɔa ƒe hiahiãwo.
Dzɔdzɔmeŋutete me toto: woléa ŋku ɖe didime siwo dzi wolɔ̃ ɖo kple dɔwɔwɔ ƒe nusiwo wowɔ ŋu hafi ɖoa wo ɖe wo.
B2B nana ƒe kpekpeɖeŋu: kpɔɖeŋuwo, mɔ̃ɖaŋu kadodo, agbɔsɔsɔ gã wɔwɔ kple dɔdɔ ƒe nubablawo li.
OEM / ODM subɔsubɔdɔ: kpekpeɖeŋu tso nu tiatia to dekɔnu wu akpawo.
Wallis doa alɔ dutanyigbadzinuwo tsɔtsɔ va duta, mamalawo, fabricators kple OEM asisiwo kple kpɔɖeŋu ƒe dodokpɔ, nɔnɔmewo ƒe kpeɖodzi, nuwɔwɔ ƒe ɖoɖowɔwɔ kple nusiwo wotsɔ ɖoa duta ƒe bablawo. Ma wò dɔbiagbalẽvi, ƒe sia ƒe ƒe didi kple mɔ̃ɖaŋununya ƒe nɔnɔmetata be nàxɔ kafukafu si de pɛpɛpɛ wu.
Wallis Gbesiagbe Dɔwɔnawo Kple Xexeame Katã ƒe Ðoɖowɔwɔ Ŋuti Kpekpeɖeŋunana
Standard PC naa ŋusẽ nyui aɖe ŋutɔ le ŋusẽkpɔɖeamedzi gake eƒoa nu bɔbɔe vie. PC/PMMA composite sheet tsɔa PMMA ƒe anyigba si sesẽ wu kpena ɖe eŋu esime wòléa PC ƒe nuto ƒe sesẽme me ɖe asi, si naa ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ kple anyigba ƒe dzedzeme ƒe dadasɔ nyuie wu.
Plastik aɖeke si me kɔ la mete ŋu ƒoa nu keŋkeŋ o. PMMA ƒe anyigba naa tsitretsitsi ɖe ʋuʋudedi ŋu nyuie wu PC si wozãna ɖaa, esime dzesi siwo wofa sesĩe siwo woate ŋu atia ate ŋu ana tsitretsitsi ɖe ʋuʋudedi ŋu si lolo wu. Tsɔ dodokpɔ ƒe dzidzenu si hiã kple lɔlɔ̃ ɖe edzi ƒe asixɔxɔ na dɔbiagbalẽvi siwo bia nu geɖe.
Ẽ, ne wotia dzesi si sɔ si wotsɔ UV-si li ke. Gblɔ teƒe si wòle, subɔsubɔ ƒe agbenɔƒe si wokpɔ mɔ na, ɣe ƒe keklẽ kple amadede ƒe tɔtrɔ ƒe seɖoƒe na Wallis ale be woate ŋu ada tiatia si sɔ si te ŋu nɔa te ɖe yame ƒe nɔnɔme nu la kpɔ.
Ɛ̃. Dɔwɔwɔ si li la dometɔ aɖewoe nye lãɖeɖe, tomekuku, CNC mɔ̃wo kple bending. Ma eƒe titrime, bend radius, wɔwɔ dzoxɔxɔ, agbalẽtata ƒe ɖoɖo kple nutata hafi ewɔwɔ ale be woate ŋu aɖo kpe ɖekawɔwɔ dzi.
Ɛ̃. Titrime si woɖo ɖe axa sia dzi nye mm 1.5, eye titrime siwo wowɔ ɖe ɖoɖo nu, agbalẽ ƒe didime kple amadedewo li le mɔ̃ɖaŋununya me toto, ewɔwɔ ƒe ŋutete kple nudɔdɔ ƒe agbɔsɔsɔme nu.
Zã tsi dzadzɛ, atike fafɛ si mewɔa akpa aɖeke o kple avɔ falɛfalɛ si meƒoa nu o. Ƒo asa na nututu ƒuƒu, abrasive pads kple solvents siwo dzi womeda asi ɖo o. Do atike ɖesiaɖe si wotsɔna klɔa nu ŋu kpɔ le kpɔɖeŋu aɖe dzi hafi nàzãe le afisiafi.
Taflatse na eƒe titrime, kekeme, didime, amadede, nuwuwu, dɔwɔwɔ, dɔwɔwɔ ƒe nudidiwo, dɔwɔwɔ ƒe nɔnɔmetatawo, agbɔsɔsɔ, afisi woɖoe ɖo kple ɖaseɖigbalẽ alo dodokpɔ ŋuti nyatakaka siwo hiã.
Ɛ̃. Kpɔɖeŋuwo li na dzedzeme, dɔwɔwɔ kple dɔwɔwɔ ƒe dodokpɔ. Le grade si wowɔ ɖe ɖoɖo nu alo akpa si wowɔ gome la, na mɔ̃ɖaŋununya ƒe nɔnɔmetata ale be Wallis nate ŋu aɖo kpe kpɔɖeŋu ƒe anyinɔnɔ kple ɣeyiɣi si woatsɔ awɔe dzi.
Èhiã PC/PMMA ƒe agbalẽ si wowɔ ɖe ɖoɖo nu si wowɔ ɖe ɖoɖo nua?
Ðo wò nutata, taɖodzinu ƒe dɔwɔwɔ, dzidzeme kple nudɔdɔ ƒe agbɔsɔsɔ ɖe nuawo tiatia kple nyayɔyɔ.
