|
Wallis -PVC ƒe Agbalẽ
Wallis ye nye esia
| Amadede: | |
|---|---|
| Agbɔsɔsɔme: | |
| Nusi wotsɔ wɔe: | |
| viɖe: | |
| Dɔwɔwɔ: | |
| Agbɔsɔsɔ: | |
Wotrɔ asi le Wallis transparent rigid PVC film kple sheet ŋu na atikewo ƒe blister packaging dɔwɔwɔwo abe tablets, capsules kple nu bubu siwo sɔ solid-dose nu. PVC wɔwɔme si me kɔ la ƒoa adzɔnuwo ƒe dzedzeme, sesẽme kple dzoxɔxɔ ƒe ŋutete nu ƒu na atikewo ƒe babla trɔlawo kple blister babla wɔlawo.
Woate ŋu ana didime siwo wowɔ ɖe ɖoɖo nu le blister mɔ̃ ƒe nɔnɔmewo kple nubablɛ ƒe nudidiwo nu. Le atikewɔdɔwo gome la, ele be nuƒlelawo naɖo kpe film ƒe titrime si hiã, agbalẽ xatsaxatsa ƒe kekeme, agbalẽ xatsaxatsa ƒe didime, nu vevi ƒe lolome, wɔwɔme ƒe goglome, nutsyɔnu ƒe nu, nutrenu ƒe nɔnɔmewo kple se ƒe nuŋlɔɖi siwo sɔ dzi hafi woawɔe le agbɔsɔsɔ gã me.
PVC sesẽ si wozãna ɖaa naa web si wɔa dɔ nyuie na ʋuʋudedi geɖe zazã, gake mɔxenu ƒe nudidiwo toa vovo ŋutɔ le atikewo dome. Atike siwo sea tsi alo oxygen-sesẽ ate ŋu abia be woatsɔ mɔxenu si lolo wu ƒe wɔwɔme wu mono PVC si wozãna ɖaa, eyata ele be woada asi ɖe nusiwo woatsɔ abla nuawo tiatia dzi le atike si wowɔ vɔ ƒe liƒo ƒe nudidiwo nu.
| Nu si wowɔ | Transparent Rigid PVC Film / Agbalẽvi na Atikewɔwɔ Blister Packaging |
| Nu | PVC / Polyvinyl Chloride si mesẽ o |
| Amadede | Si me kɔ |
| Lolome | Wotrɔ asi le eŋu le Nubablɛwo Kple Mɔ̃a ƒe Nudidiwo Nu |
| Eƒe titrime | Trɔ asi le eŋu — Ðo kpe Titrime si Wobia dzi kple Wallis |
| Roll ƒe Kekeme | Trɔ asi le eŋu le Blister Packaging Line ƒe nya nu |
| Roll Diameter / Nu vevi aɖe | Kpe Ðe Eŋu Le Asitsalawo ƒe Mɔ̃ ƒe Ðoɖowɔwɔ Nu |
| Dɔwɔwɔ Gbãtɔ | Thermoforming na Atikewɔwɔ ƒe Blister Dowo |
| Nusiwo Wowɔna Siwo Wozãna Bɔbɔe | Tablets, Capsules kple Solid-Dose Blister Dɔwɔwɔ Bubu Siwo Sɔ |
| Nutsyɔnu ƒe Ðekawɔwɔ | Ðo kpe Lidding Foil, Heat-Seal Coating kple Sealing Nɔnɔmewo dzi Hafi Ewɔe |
| Ðoɖowɔɖiwo Ŋuti Nuŋlɔɖiwo | Tsɔ Asi, Atikewo, Dodokpɔ Ŋuti Nyatakaka alo Sedziwɔwɔ Ŋuti Nuŋlɔɖi Siwo Hiã Ne Èle Nya Biam |
| Mɔxenu ƒe Nudidi | Ele be Woatia PVC alo Mɔxenu Kɔkɔtɔ ƒe Dɔwɔnu Si Wozãna Le Atikewo ƒe Liƒo ƒe Nudidiwo Nu |
Rigid PVC blister film nye thermoformable plastic forming web si wozãna tsɔ wɔa blister ƒe do ɖekaɖekawo. Le nubablɛwo wɔwɔ me la, wodoa dzo na film la, wowɔae wòzua do ƒe nɔnɔme si hiã, wotsɔa atike si wotsɔ wɔa atike la yɔa eme eye emegbe wotsɔa nutsyɔnu si sɔ tsakana.
Le atikekuiwo kple atikekuiwo gome la, PVC si me kɔ la wɔnɛ be agbɔsɔsɔme si wobla ɖe agba me la nɔa dzedzem esime wònaa xɔtuɖoɖo ƒe nɔnɔme si hiã na ʋuʋudedi ɖekaɖekawo. Nuwo ƒe ɖekawɔwɔ, gbadzaƒe kple wɔwɔme ƒe nuwɔna le vevie elabena wokpɔa ŋusẽ ɖe do ƒe ɖekawɔwɔ kple packaging-line ƒe liƒo dzi.
Womate ŋu atia PVC film si sɔ to eƒe dzedzeme ko dzi o. Ele be woada eƒe titrime, wɔwɔme ƒe goglome, doa ƒe nɔnɔme, mɔ̃a ƒe duƒuƒu, wɔwɔme ƒe dzoxɔxɔ, nutrenu ƒe ɖoɖo kple mɔxenu ƒe dɔwɔwɔ si hiã la katã kpɔ ne wole atike ƒe ʋuʋudedi ƒe nu aɖe gblɔm.
Do siwo me ʋuʋudedi le siwo me kɔ la wɔnɛ be atikekui alo atikekuiwo nɔa dzedzem evɔ womeʋua do ɖekaɖeka aɖeke o. Esia doa alɔ nukpɔkpɔ ƒe dzesidede le wo babla, wo mama kple wo zazã me.
Nusiwo me kɔ si me ʋuʋudedi le na be adzɔnuwo wɔlawo kple ezãlawo te ŋu léa ŋku ɖe atike si wobla ɖe agba me ŋu kple ŋku be tɔtrɔ siwo dze ƒã le ŋutilã me, unit siwo bu alo nusiwo wobla ɖe agba me ƒe gbɔdzɔgbɔdzɔ siwo woate ŋu akpɔ hã.
Nukpɔkpɔ le gaglãgbe ate ŋu ado alɔ nukpɔkpɔ ƒe ɖoɖo siwo wowɔna le wo ɖokui si alo asi siwo wozãna le ʋuʋudediwo yɔyɔ kple woƒe nyonyome dzi kpɔkpɔ ƒe dɔwɔwɔwo me hã, le ɖoɖo tɔxɛ si wowɔ ɖe mɔ̃ si wowɔna ŋu nu.
Atike aɖewo hiã takpɔkpɔ bubuwo tso kekeli me. Le dɔ siawo me la, ɖewohĩ PVC si me kɔ la manye tiatia si sɔ o negbe ɖe woda asi ɖe ametakpɔnu si sɔ si xɔa UV, si ƒe amadede le abe amadede ene alo esi woate ŋu azã bubu dzi na atike la ko hafi.
PVC sesẽ si me kɔ nana be woate ŋu akpɔ atikekui kple atikekui siwo wobla ɖe agba me nyuie, si wɔe be wòsɔ na atikewo ƒe ʋuʋudedi ƒe nɔnɔmewo le afisiwo wòhiã be woatsɔ nukpɔkpɔ ade dzesi atikeawo le.
Wozãa PVC geɖe abe dzoxɔxɔ ƒe mɔ̃ ene elabena woate ŋu ado dzoe eye woawɔe wòazu ʋuʋudedi ƒe do siwo woɖe fia. Ele be dzeside si wotia la nasɔ kple asisi ƒe blister mɔ̃a ƒe do ƒe goglome, geometry kple dɔwɔwɔ ƒe nɔnɔmewo.
Dimension siwo mewɔa tɔtrɔ o kple film ƒe nuwɔna si dzi wokpɔna kpena ɖe ame ŋu wòdoa alɔ web ʋuɖoɖo si sɔ, doa ƒe nɔƒe, nutrenu ƒe ŋkɔ ŋɔŋlɔ kple tsi si le anyime lãɖeɖe le blister packaging dɔwɔnuwo ŋu.
Film ƒe kekeme kple agbalẽ xatsaxatsa ƒe ɖoɖo si wowɔ ɖe ɖoɖo nu ate ŋu akpe ɖe tɔtrɔlawo ŋu be woatsɔ nusiwo woatsɔ ana atikewo ƒe babla dɔwɔnu siwo li fifia eye woaɖe wo ɖeɖe alo asitɔtrɔ le mɔ̃wo ŋu si mehiã o dzi akpɔtɔ.
Mono rigid PVC ate ŋu ana wɔwɔme ƒe egbɔkpɔnu nyui aɖe na atikewɔnu siwo sɔ le afisi mɔxenu ƒe dɔwɔwɔ si sɔ na atike la ƒe nudidi siwo ŋu woda asi ɖo le babla me.
Nyametsotso vevitɔwo dometɔ ɖeka le atikewo ƒe ʋuʋudedi ƒe bablawo me enye nenye be mono PVC si wozãna ɖaa kpɔa ame ta nyuie alo nenye be atike la hiã na mɔxenu si lolo wu ƒe wɔwɔme.
Standard rigid PVC naa thermoformability, gaglãgbe kple gɔmedzedze ƒe nubabla takpɔkpɔ. Ate ŋu asɔ na atike siwo ƒe liƒo ŋuti numekukuwo ɖee fia be mɔxenu ƒe dɔwɔwɔ le PVC ʋuʋudedi ƒe ɖoɖo si wotia me sɔ gbɔ.
PVC/PVDC xɔtuɖoɖowo ƒoa PVC gɔmeɖoanyi si woate ŋu awɔ le dzoxɔxɔ me kple mɔxenu ƒe ƒuƒoƒo bubu nu ƒu. Zi geɖe la, wobua wo ne ehiã be tsi alo gas ƒe mɔxenu ƒe dɔwɔwɔ lolo wu alesi mono PVC si wozãna ɖaa ate ŋu ana.
Ele be woatu nusiwo woatsɔ awɔ atikewo ƒe liƒo ŋuti nyatakakawo, woƒe agbenɔƒe ƒe taɖodzinu, yame ƒe nɔnɔme, nusiwo woatsɔ atsyɔ nu nu, ʋuʋudedi ƒe nɔnɔme kple se ƒe nudidi siwo sɔ dzi. Mele be woatia xɔ si me mɔxenu si lolo wu le alo agbee le nuwo ƒe asi ɖeɖeko ta o.
Woɖea PVC film sesẽ la ɖa eye wotsɔa wo toa mɔ̃ si wotsɔ blaa ʋuʋudediwoe la dzi. Ele be agbalẽ xatsaxatsa ƒe kekeme, nu vevi ƒe lolome, ʋuʋudedi ƒe nyonyome kple agbalẽ xatsaxatsa ƒe didime nasɔ kple dɔwɔnuwo ƒe ɖoɖo.
Wodoa dzo na film si wotsɔ wɔa nu la wòzua dzoxɔxɔ ƒe fesre si sɔ. Ðoɖo ŋutɔŋutɔwo nɔ te ɖe PVC ƒe grade, film ƒe titrime, mɔ̃ ƒe nɔnɔme kple taɖodzinu blister geometry dzi.
Wowɔa film si wodo dzoe la wòzua do ɖekaɖekawo. Ate ŋu abia be blister ƒe nɔnɔme siwo goglo wu alo esiwo sesẽ wu nabia be woawɔ nu vovovowo tso kpe gbadzɛ siwo me goglo o ƒe do siwo wozãna ɖaa gbɔ.
Wotsɔa atikekuiwo, atikekuiwo alo atike bubu siwo dzi woda asi ɖo dea do siwo wowɔ me le atikewo ƒe babla ƒe ɖoɖo nu.
Wotsɔa PVC web si wowɔ la tsakana kple nutsyɔnu si sɔ. Ele be woada asi ɖe nutrenu ƒe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woanɔ anyi kple dzoxɔxɔ-nutrenu ƒe nutsyɔnu dzi abe ʋuʋudedi ƒe babla ƒe ɖoɖo bliboa ƒe akpa aɖe ene.
Wolãa ʋuʋudedi siwo wowɔ vɔ la heléa ŋku ɖe wo ŋu le adzɔnuwɔƒea ƒe bablawo kple woƒe nyonyome dzi kpɔkpɔ ƒe ɖoɖo siwo ŋu woda asi ɖo nu.
Woate ŋu awɔ PVC si wɔa film sesẽ la le dzoxɔxɔ me wòazu do ɖekaɖekawo hena atikewɔtike siwo sɔ. Ele be woatia do ƒe didime kple film ƒe nɔnɔmewo le tablet ƒe geometry kple packaging-line ƒe nudidiwo nu.
Zi geɖe la, kapsulawo hiãa do ƒe nɔnɔme siwo goglo wu kpetike geɖe, si wɔnɛ be nuwɔwɔ ƒe goglome kple nusiwo hea nuwɔna ŋu bua vevie le PVC film tiatia me.
Blister ƒe nɔnɔmewo ate ŋu ama atikewo ɖe do ɖekaɖekawo me, si ado alɔ agbɔsɔsɔme ɖeka ƒe ɖeɖefia le afisi wowɔ nubablɛ ƒe ɖoɖo bliboa le eye woda asi ɖe edzi na atike si woɖo be woazã.
Do ƒe didime vovovowo, pack ƒe ɖoɖowo kple mɔ̃ ƒe ɖoɖowo ate ŋu abia be woatrɔ asi le film ƒe didime kple wɔwɔme ƒe nɔnɔmewo ŋu. Ele be nuƒlelawo natsɔ nɔnɔmetatawo alo mɔ̃a ƒe nɔnɔmewo ana ne wole PVC blister material si wowɔ ɖe ɖoɖo nu biam.
Film ƒe titrime kpɔa ŋusẽ ɖe sesẽ, nuwɔwɔ ƒe nuwɔna, do ƒe ŋusẽ kple nusiwo wozãna dzi. Gblɔ wò titrime si dzi woda asi ɖo fifia alo na blister ƒe nudidiwo ale be woate ŋu adzro nɔnɔme si sɔ me.
Ele be agbalẽ xatsaxatsaa ƒe kekeme nasɔ kple blister mɔ̃a kple dɔwɔnuwo ƒe ɖoɖo. Web ƒe kekeme si li fifia nana nye afɔɖeɖe vevitɔwo dometɔ ɖeka ne wole biabiam be woaɖɔli alo woazã nu bubuwo.
Core eme didime, maximum agbalẽ xatsaxatsa gota didime kple agbalẽ xatsaxatsa ƒe kpekpeme ate ŋu akpɔ ŋusẽ ɖe mɔ̃a ƒe agbatsɔtsɔ kple unwinding dzi. Ele be woatsɔ parameter siawo ade B2B biabia me.
Standard tablet cavities kple goglo alo complex capsule cavities ate ŋu abia nu vovovowo tso film si le wɔwɔm la dzi. Do ƒe nɔnɔmetatawo nana kpena ɖe ame ŋu wòdaa nusi hiã be woawɔe la kpɔ nyuie wu.
Mɔ̃a ƒe duƒuƒu, dzoxɔxɔ ƒe ɖoɖowɔwɔ kple ewɔwɔ ƒe mɔ̃ɖaŋununya ate ŋu akpɔ ŋusẽ ɖe nusiwo woatsɔ awɔe ƒe tiatia dzi. Ele be woaɖo kpe nusi woatsɔ aɖɔli wo dzi le asisi la ƒe dɔwɔnu ŋutɔŋutɔ siwo wotsɔ wɔa woe dzi hafi woazãe le asitsatsa me.
Atikewo ƒe ʋuʋudedi ƒe babla nye dɔwɔwɔ si ŋu wowɔ ɖoɖo ɖo, eyata ele be nusiwo wotsɔ wɔe ƒe dzedze nayi ŋgɔ wu nukpɔkpɔ ƒe dzedzeme kple mɔ̃ɖaŋununya ƒe nɔnɔme veviwo ko. Nuŋlɔɖi siwo hiã la nɔ te ɖe asi si me woayi, agbɔsɔsɔme si woazã ƒe agbalẽvi, kadodo ƒe nɔnɔmewo kple atikewɔƒea ƒe nyonyome ƒe ɖoɖo dzi.
Mɔkpɔkpɔ siwo le sewo me to vovo le asiwo dome. Ele be nuƒlelawo nade dzesi dukɔ alo nuto si me woade atike si wowɔ vɔ la agbalẽ me ahadzrae le.
Ne wò dzedze ƒe ɖoɖoa bia be nàwɔ atikewo ŋuti dodokpɔ tɔxɛ aɖe, nusiwo nèzã ƒe gbeƒãɖeɖe, ɖoɖowɔɖi ŋuti nyatakaka, numekuku ƒe ɖaseɖigbalẽ alo mɔ̃ɖaŋu ŋuti nuŋlɔɖi bubu la, gblɔ nudidi sia hafi nàbia.
Atike ƒe ʋuʋudedi ƒe agbalẽvi ƒe nyonyo nɔ te ɖe film si wowɔ, nusi wotsɔ tsyɔ nu nu, dzoxɔxɔ-nutrenu ƒe ɖoɖo, do ƒe nɔnɔme, atike si wobla ɖe agba me kple ewɔwɔ ƒe mɔnu dzi. Eyata ele be woadze na PVC film be wòanye nubablɛ bliboa ƒe akpa aɖe.
Hafi nàzã nusi woatsɔ awɔ atikewo ƒe kadodo la, ɖo kpe edzi be nuŋlɔɖi siwo hiã na wò dɔbiagbalẽvi kple asi si nèɖo taɖodzinu na la ɖo kpe grade, titrime kple ewɔwɔ ŋuti nyatakaka si tututu wotsɔ na wò dzi.
Ne èdi be yeawɔ mɔ̃ɖaŋununya me dzodzro kabakaba wu eye nàyɔ nya siwo woyɔ la wòade pɛpɛpɛ wu la, na nyatakaka siwo gbɔna ɣesiaɣi si wòanya wɔ:
PVC ƒe titrime si hiã
Agbalẽxatsaxatsa ƒe kekeme si wobia
Core ememe didime
Maximum agbalẽ xatsaxatsa gota didime alo agbalẽ xatsaxatsa ƒe kpekpeme
Tablet alo capsule ƒe didime
Blister cavity ƒe goglome kple eƒe ɖoɖo
Blister packaging mɔ̃ ƒe kpɔɖeŋu
Fifia mɔ̃a ƒe duƒuƒu kple wɔwɔme mɔnu
Lidding foil alo nusi wotsɔ tsyɔa nu dzi
Tsi kple oxygen ƒe mɔxenu ƒe agbɔsɔsɔ si hiã
Amadede alo UV/kekeli-takpɔnu siwo hiã
Asi si me woayi
Atikewɔwɔ alo ɖoɖowɔwɔ ŋuti nuŋlɔɖi siwo hiã
Ƒe sia ƒe alo nudɔdɔ ƒe agbɔsɔsɔ
Ne èle atikewo ƒe ʋuʋudedi film si li xoxo ɖɔlim la, ne èna mɔfiamegbalẽ alo kpɔɖeŋu si li fifia hã ate ŋu akpe ɖe ŋuwò nàɖe vodada siwo wowɔna le nusiwo woatsɔ awɔ dɔe tiatia me dzi akpɔtɔ.
Woate ŋu aƒo nu tso PVC nu ŋu le asisiwo ƒe blister packaging ƒe nudidiwo nu, si akpe ɖe converters ŋu be woatsɔ nusiwo ƒe didime awɔ ɖeka kple woƒe ewɔwɔ dɔwɔnuwo.
PVC sesẽ si me kɔ naa nusi wowɔ la ƒe dzedzeme si hiã na tablet kple capsule blister packaging formats geɖe esime wòdoa alɔ thermoforming ɖe do ɖekaɖekawo me.
Mɔ̃, do, titrime, agbalẽ xatsaxatsa kple se ƒe nudidiwo nana ɖea mɔ na Wallis be wòada dɔa kpɔ le atikewo ƒe babla ƒe dɔwɔwɔ ŋutɔŋutɔ nu tsɔ wu be wòanɔ te ɖe PVC ƒe nɔnɔme si wozãna ɖaa dzi ko.
Le nu yeye alo nudzrala ƒe dzesidedɔ aɖe gome la, wokafua ewɔwɔ dodokpɔ be woatsɔ ada dzoxɔxɔ ƒe wɔwɔme, nyatakakadzraɖoƒe ƒe dɔwɔwɔ, do ƒe nyonyome, nutrenu ƒe dɔwɔwɔ kple ɖekawɔwɔ kple asisi ƒe nubablɛ dɔwɔnuwo kpɔ.
Ele be woakpɔ atikewo ƒe ʋuʋudedi film ta tso ke, ɖiƒoƒo, anyigba ƒe gbegblẽ, eƒe tɔtrɔ kple nudzraɖoƒe ƒe nɔnɔme siwo mesɔ o me le eŋudɔwɔwɔ kple etsɔtsɔ yi teƒe bubuwo me. Ele be woaɖo kpe babla ƒe ɖoɖowɔwɔ dzi le agbalẽ xatsaxatsa ƒe didime, agbalẽɖoɖoɖa mɔnu kple asisiwo ƒe nyonyome ƒe nudidiwo nu.
Wozãa PVC film sesẽ zi geɖe abe dzoxɔxɔ ƒe web ene le blister packs me na tablets, capsules kple atike bubuwo siwo sɔ. Wowɔa film la wòzua dowo eye wotsɔa nutsyɔnu si sɔ kpena ɖe eŋu.
Mele be woabui be nu aɖeke mesɔ na atikewo ƒe kadodo le esi wotsɔ PVC wɔe ta ko o. Ele be nuƒlelawo naɖo kpe nusi tututu wotsɔ wɔe ƒe hatsotso, alesi wowɔe ƒe nɔnɔme, sedziwɔwɔ ŋuti nuŋlɔɖi siwo hiã kple alesi wòsɔ na atike si woɖo be woatsɔ awɔe kple asi si me woayi la dzi.
Ɛ̃. Wotsɔa Wallis ƒe atike si li fifia la naa amewo kple didime siwo wowɔ ɖe ɖoɖo nu. Ele be nuƒlelawo nana titrime si hiã, agbalẽ xatsaxatsa ƒe kekeme, nu vevi ƒe lolome, agbalẽ xatsaxatsa ƒe didime kple mɔ̃a ŋuti nyatakakawo ale be woate ŋu adzro nɔnɔme si sɔ me.
Mono PVC nye dzoxɔxɔ ƒe nɔnɔme si wozãna ɖaa si naa mɔxenu takpɔkpɔ le gɔmedzedzea me. PVC/PVDC tsɔa mɔxenu si lolo wu kpena ɖe eŋu eye wobua eŋu zi geɖe ne atike aɖe hiã takpɔkpɔ geɖe wu tso tsi alo ya me. Ele be woatu tiatia mamlɛtɔ ɖe liƒo kple nubabla ƒe kpeɖodzinyatakakawo dzi.
Ema nɔ te ɖe atike la ƒe liƒo ƒe nudidi siwo ŋu woda asi ɖo dzi. Atike siwo te ŋu xɔa tsi ŋutɔ ate ŋu abia be woawɔ ʋuʋudedi si ƒe mɔxenu si lolo wu. Ele be atikewɔlawo nakpɔ mɔxenu ƒe agbɔsɔsɔ si hiã to atikewo kple wo bablawo me dzodzro me.
Ẽ, wozãa PVC sesẽ zi geɖe abe nyatakakadzraɖoƒe si wotsɔ wɔa tablet kple capsule blister ƒe nɔnɔme siwo sɔ ene. Ele be woatsɔ film ƒe titrime kple eƒe wɔwɔme ƒe nɔnɔmewo asɔ kple nusi wowɔ ƒe didime kple do ƒe nɔnɔme.
Mɔ̃a ƒe dɔwɔwɔ nɔ te ɖe PVC ƒe hatsotso tɔxɛ, eƒe titrime, dɔwɔnuwo ƒe nɔnɔme, dzoxɔxɔ ƒe ɖoɖo, do ƒe nɔnɔme kple fli ƒe ɖoɖowo dzi. Ele be asisiwo natsɔ woƒe mɔ̃a ƒe nɔnɔme kple dɔwɔwɔ ƒe nɔnɔmewo ana eye woada asi ɖe sinima la dzi le film si wowɔ ŋutɔŋutɔ dzi.
Nu veviwoe nye film ƒe titrime, PVC ƒe wɔwɔme, dzoxɔxɔ si wowɔ, dzoxɔxɔ ƒe ɣeyiɣi, mɔ̃a ƒe duƒuƒu, do ƒe goglome, draw ratio kple tooling design. Do siwo sesẽ alo esiwo goglo wu ate ŋu abia be woawɔ nɔnɔme vovovowo tso ʋuʋudedi siwo me goglo o siwo wozãna ɖaa gbɔ.
Wozãa PVC wɔwɔ ƒe nyatakakadzraɖoƒewo zi geɖe le ʋuʋudedi ƒe ɖoɖo siwo me wotsɔa nutsyɔnu siwo sɔ, siwo dome aŋɔ ƒe xɔtuɖoɖo siwo sɔ hã le. Gake ele be woaɖo kpe dzoxɔxɔ-nutrenu ƒe nutsyɔnu, nutrenu ƒe dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si woatsɔ anɔ anyi dzi na nu tɔxɛa ƒe ƒuƒoƒo.
Standard transparent PVC tsɔa nusiwo wowɔ ƒe dzedzeme ɖoa nɔƒe gbãtɔ eye mele be woabui le eɖokui si be enye nusi xea mɔ na kekeli o. Adzɔnu siwo hiã be woakpɔ wo ta tso UV alo kekeli si wokpɔna me ate ŋu ahiã na nubablɛ ƒe ɖoɖo si me amadede le, si xɔa UV alo bubu.
Le atike si wowɔ nu la, nuƒlelawo ate ŋu ahiã nyatakaka siwo ku ɖe tsidzadza ƒe kaka, ɔksidzin ƒe kaka, kekeli takpɔkpɔ kple nubablɛ ƒe dɔwɔwɔ ƒe nɔnɔme bubuwo ŋu. Ele be woaɖe dodokpɔmɔnu siwo hiã kple lɔlɔ̃ ɖe edzi ƒe dzidzenuwo me to atikewo ƒe babla ƒe nɔnɔmetata me.
Gblɔ asi si me woayi kple atikewo ŋuti nuŋlɔɖi, atike-kadodo, ɖoɖowɔwɔ alo asisiwo koŋ ŋuti nuŋlɔɖi ɖesiaɖe si hiã. Esia wɔnɛ be woate ŋu ada nusiwo wotsɔ wɔe ƒe dzeside tututu kple nuŋlɔɖi siwo li la kpɔ hafi abia.
Le nudzrala yeyewo ƒe dzedze alo nuwo tɔtrɔ ƒe dɔwo gome la, wokafua kpɔɖeŋu dodokpɔ. Na titrime, kekeme, mɔ̃a ƒe nɔnɔme kple blister ƒe ɖoɖo si hiã ne èle nu ƒom tso kpɔɖeŋu ƒe nudidiwo ŋu.
Taflatse na titrime, agbalẽ xatsaxatsa ƒe kekeme, nu vevi ƒe lolome, agbalẽ xatsaxatsa ƒe didime, agbɔsɔsɔ, mɔ̃ ƒe kpɔɖeŋu, do ƒe didime, nusi wobla ɖe agba me ƒe ƒomevi, nutsyɔnu ƒe nu, mɔxenu ƒe nudidiwo, asi si woayi kple mɔ̃ɖaŋu alo ɖoɖowɔɖi ŋuti nuŋlɔɖi siwo hiã.
