|
Wallis -PVC ƒe Agbalẽ
Wallis ye nye esia
| Amadede: | |
|---|---|
| Agbɔsɔsɔme: | |
| Nusi wotsɔ wɔe: | |
| viɖe: | |
| Dɔwɔwɔ: | |
| Agbɔsɔsɔ: | |
Wallis tsi si me tsi mele o inkjet printable PVC sheet nye PVC agbalẽtamɔ̃ sesẽ si wofa ɖe eŋu si wowɔ na ID gbalẽviwo, hamevinyenye gbalẽviwo, nuteƒewɔwɔ gbalẽviwo, nunana gbalẽviwo, wɔna gbalẽviwo, tags, boblododo gbalẽviwo kple plastic tata ƒe dɔwɔnu bubu siwo nɔa anyi didina. Inkjet-xɔla ƒe anyigba si wodzra ɖo etɔxɛe kpena ɖe ink ƒe xɔxlɔ̃, ƒuƒu kple nɔnɔmetata ƒe gɔmesese dzi ɖuɖu esime PVC gɔmeɖoanyia naa tsi ƒe tsitretsitsi, sesẽ kple kakaɖedzi le anyime dɔwɔwɔ.
Wotrɔ asi le eŋu na kaɖi wɔlawo, agbalẽtata dɔwɔƒewo, ID egbɔkpɔnu nana, mamalawo kple OEM nuƒlelawo, Wallis PVC inkjet agbalẽvi ate ŋu ana le agbalẽ ƒe lolome siwo wowɔ ɖe ɖoɖo nu kple ewɔwɔ ƒe nɔnɔmewo me. Woate ŋu adzro A4, A3-ƒomevi kple dɔa koŋ ƒe nɔnɔmewo me le agbalẽtamɔ̃ ƒe nuɖuɖu ƒe seɖoƒewo, kaɖi tutu kple laminating dɔwɔnuwo nu.
To vovo na PVC sesẽ dzro si womefa o la, PVC si woate ŋu ata to inkjet dzi zãa nusi xɔa anyigba si na be inkjet ink siwo sɔ la tsi, seke eye woƒu nyuie wu. Ele be woado agbalẽtamɔ̃a tututu, ink ƒe atikewɔwɔ, nusi wotsɔ blae ƒe akpa, agbalẽa ƒe titrime kple eƒe nuwuwu ƒe mɔnu akpɔ ɖekae hafi woawɔe le agbɔsɔsɔ gã me.
Inkjet-xɔla si wofa PVC anyigba na nɔnɔmetata siwo ƒe nɔnɔme deŋgɔ
Tsi-tsitretsitsi PVC gɔmeɖoanyi na durable plastic kaɖi dɔwɔwɔwo
White printable surface kple customized nɔnɔmewo li
Esɔ na ID, hamevinyenye, nuteƒewɔwɔ, nunana kple boblododo gbalẽviwo
Ewɔa ɖeka kple tsi ƒe amadede kple amadede ƒe inkjet ɖoɖo tiatia aɖewo le dodokpɔ vɔ megbe
Woate ŋu atsɔ laminated, atsoe, aƒoe eye woatrɔe wòazu plastic card siwo wowɔ vɔ
Agbalẽvi ƒe lolome siwo wowɔ ɖe ɖoɖo nu kple B2B ƒe agbɔsɔsɔ gbogbotɔ
Bia Inkjet PVC Sheet Kpɔɖeŋuwo kple Quote
Standard rigid PVC ƒe ink absorbency mesɔ gbɔ kura o eye mesɔ le eɖokui si na tsi inkjet tata si sɔ o. Ne wota nuŋlɔtsi si wotsɔ tsi wɔe ɖe PVC si mesɔ o si ŋu womewɔ atike ɖo o dzi tẽ la, nuŋlɔtsia ate ŋu azu ku, asisi, aƒu blewu alo aɖee afia be melé ɖe eŋu nyuie o.
PVC si woate ŋu ata kple inkjet kpɔa kuxi sia gbɔ to nusi wotsɔ blaa anyigba si xɔa nu la dede eme me. Nusi wotsɔ blae la kpɔa ink ƒe tsidzadza, tsitete ƒe kaka, eƒe xɔxlɔ̃ kple eƒe ƒuƒu dzi ale be inkjet agbalẽtamɔ̃ siwo sɔ ate ŋu awɔ nuŋɔŋlɔ siwo le ɖaɖɛ wu, fotowo, barcodewo, dzesiwo kple nyatakaka siwo trɔna.
PVC substrate la naa ŋutilã me wɔwɔme si le kaɖia me, si me sesẽ, tsi ƒe tsitretsitsi kple dɔwɔwɔ ƒe liƒo hã le. Nusi wotsɔ blaa nu si woate ŋu ata lae afia alesi nuŋlɔtsi la wɔa nui le eƒe go dzi. Eyata ƒuƒoƒo eveawo siaa kpena ɖe agbalẽtata si wowu enu ŋu.
PVC ŋutɔ mexɔa tsi abe pepa ene o, gake tsi ate ŋu akpɔ ŋusẽ ɖe nɔnɔmetata si wota dzi kokoko ne nuŋlɔtsi alo nusi wotsɔ blae la mete ŋu tsi nyuie o. Tsi ƒe tsitretsitsi ɖe kaɖi si wowu enu ŋu nɔ te ɖe PVC ƒe agbalẽa, nusi wotsɔ blae, nuŋlɔtsi ƒe atikewɔwɔ, ɣeyiɣi si woatsɔ aƒui kple nenye be wotsɔ nusi wotsɔ tsyɔ edzi alo nusi wotsɔ wu enu ƒe akpa bubu kpɔ anyigba si wota la ta.
Le dɔwɔwɔ siwo bia tsi ƒe tsitretsitsi si woɖe fia, abrasion tsitretsitsi alo gota ƒe anyinɔnɔ tegbee gome la, ele be nuƒlelawo nado kaɖi si wota ƒe wɔwɔme bliboa kpɔ tsɔ wu be woaɖo ŋu ɖe PVC substrate ƒe nuŋlɔɖi ɖeɖeko ŋu.
Wallis ate ŋu adzro PVC inkjet agbalẽvi ƒe nɔnɔmewo me le asisi la ƒe agbalẽtamɔ̃, kaɖi ƒe wɔwɔme, lamination mɔnu kple dɔwɔwɔ si wowu enu nu. Esi wònye be seɖoƒe to vovo na inkjet-tamɔ̃wo ƒe media-thickness kple feed-path seɖoƒe ta la, ele be woatsɔ nuawo asɔ kple agbalẽtamɔ̃ ŋutɔŋutɔ.
| Specification | Available Tiatia / Nuƒlela ƒe Nudidi |
|---|---|
| Nu | PVC-gbadzɛ sesẽ si ŋu wotsɔ nutsyɔnu si xɔa inkjet la ɖo |
| Amadede | Ɣi; tiatia siwo wowɔ ɖe ɖoɖo nu le dɔa ƒe kpeɖodzi te |
| Agbalẽvi ƒe Agbɔsɔsɔme | Wowɔe ɖe ɖoɖo nu; Woate ŋu aƒo nu tso A4, A3-ƒomevi kple ewɔwɔ-koŋ ƒe lolomewo ŋu |
| Eƒe titrime | Trɔ asi le eŋu le agbalẽtamɔ̃ ƒe nuɖuɖu ŋutete, kaɖi tutu kple nuwuwu titrime nudidi nu |
| Anyigba si Woate Ŋu Ata | Inkjet-xɔla si wofa ɖe anyigba |
| Agbalẽtata ƒe Akpa | Akpa ɖeka alo akpa eve ƒe ɖoɖo si woate ŋu ata le nudɔdɔ ƒe nɔnɔmewo nu |
| Ink Ƒomevi | Amadede alo amadede ƒe inkjet-mɔ̃ siwo wotsɔ tsi wɔe tiatia aɖewo le dodokpɔ si wowɔ be wosɔ ɖe wo nɔewo nu vɔ megbe |
| Anyigbadzi Nuwuwu | Matte-ƒomevi si woate ŋu ata; final gloss ate ŋu akpɔ ŋusẽ ɖe coating, ink kple lamination structure dzi |
| Tsi ƒe Tsitretsitsi | PVC substrate nye tsi-tsitretsitsi; nɔnɔmetata si wota ƒe tsitretsitsi nɔ te ɖe nusi wotsɔ blae, ink kple finishing system dzi |
| Nuwuwu | Lamination, ku lãɖeɖe, punching, trimming kple kaɖi ƒe tɔtrɔ |
| Dɔbiagbalẽviwo | ID gbalẽviwo, hamevinyenye gbalẽviwo, nuteƒewɔwɔ gbalẽviwo, nunana gbalẽviwo, dɔwɔgbalẽviwo, wɔnawo ƒe agbalẽviwo, tags kple plastic card siwo wowɔ na ame ŋutɔ |
| Trɔ asi le eŋu | Agbɔsɔsɔ, titrime, axa siwo woate ŋu ata, nutsyɔnu ƒe ɖoɖo, lãɖeɖe kple babla |
| Nuwo babla | Takpɔkpɔ agbalẽ babla kple export pallet packing le nudɔdɔ ƒe nɔnɔme nu |
Dzro Wò PVC Inkjet Sheet ƒe Nyatakakawo Me
Wotrɔ asi le nutsyɔnu si xɔa nu ŋu be wòakpɔ nuŋlɔtsi ƒe kaka dzi ale be fotowo, nuŋɔŋlɔwo, dzesidenuwo, QR-kɔdawo kple nɔnɔmetata bubu siwo wota nate ŋu alé nugbɔ siwo me kɔ kple nɔnɔmetata ƒe gɔmesese sesẽ me ɖe asi ne wozãe kple agbalẽtamɔ̃ kple nuŋlɔtsi si sɔ.
Nusi wotsɔ blaa nu si sɔ kpena ɖe ink la ŋu wòɖoa eɖokui nyuie wu alesi wòanɔ le PVC dzro si womefa o dzi. Ɣeyiɣi ŋutɔŋutɔ si wotsɔ ƒua gbe la toa vovo le nuŋlɔtsi ƒomevi, nuŋlɔtsi ƒe nutsyɔtsyɔ, agbalẽtamɔ̃ ƒe ɖoɖowo, dzoxɔxɔ kple fafa nu, eyata ele be woaɖe mɔ na agbalẽ siwo wota la be woaƒu ɣeyiɣi si sɔ hafi woatsɔ wo aƒo ƒui alo aƒo wo nu ƒu.
PVC naa tsi te ŋu nɔa te ɖe tsi nu eye wòte ŋu nɔa te ɖe aɖatsi nu wu pepa dzi kaɖi si wozãna ɖaa, si wɔe be wòɖea vi na plastik kaɖi zazã siwo hiã be woazãe enuenu.
Woate ŋu atsɔ PVC agbalẽvi siwo wota aƒo ƒu kple PVC ƒe nu vevi siwo sɔ kple film siwo wotsɔ tsyɔ nu wo dzi be woawɔ kaɖi ƒe xɔtuɖoɖo siwo wotsɔ lãgbalẽ wɔe. Lamination ate ŋu akpɔ nɔnɔmetata si wota ta eye wòana agbalẽvi si wowu enu la nanɔ anyi eteƒe nadidi.
Le agbalẽtata kple lamination ɖesiaɖe si hiã vɔ megbe la, woate ŋu atso nusi wotsɔ wɔe, atsoe wòaku, aƒoe eye woawu enu wòazu kaɖi alo plastik ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu le alesi woɖoe be woawɔe nu.
Wozãa PVC agbalẽ siwo woate ŋu ata to inkjet dzi kple Epson, Canon, HP kple inkjet ɖoɖo bubu siwo sɔ, gake esia mefia be inkjet agbalẽtamɔ̃ ɖesiaɖe ate ŋu ana nuɖuɖu PVC sesẽ dzidzedzetɔe o. Ele be agbalẽtamɔ̃a nalé nyadzɔdzɔgblɔmɔ̃a ƒe lolome kple titrime si hiã la ɖe te eye agbalẽtamɔ̃a ƒe ta nakɔ nyuie.
Ele be nuƒlelawo nalé ŋku ɖe agbalẽtamɔ̃a ƒe mɔfiamegbalẽa ŋu be nyadzɔdzɔgblɔmɔnuwo ƒe titrime sɔ gbɔ wu, nuɖuɖu ƒe ŋutete si woate ŋu ato tẽ, megbe nuɖuɖu ƒe tiatia, teƒe si woate ŋu ata kple nyadzɔdzɔgblɔmɔ̃ ƒe ɖoɖo siwo wokafu hafi abia.
Ink si wotsɔ amadede wɔe ate ŋu ana amadede siwo me kɔ eye fotoɖeɖe ƒe ʋuʋu le gbadzaa, gake amadede ƒe nuŋlɔtsi ate ŋu ana tsi, fade kple abrasion ƒe nɔnɔme vovovowo. Nusi wotsɔ blaa nu si wɔa dɔ nyuie le nuŋlɔtsi ƒe atikewɔwɔ ɖeka me ate ŋu awɔ nu le mɔ bubu nu le bubu gome, eyata kpɔɖeŋu dodokpɔ le vevie.
Axa ɖeka si woate ŋu ata le PVC inkjet-gbadzɛ aɖewo ŋu esime woate ŋu atsyɔ xɔtu bubuwo dzi le axa eveawo. Agbalẽtata ɖe teƒe si mesɔ o ate ŋu ana ink la nagalé ɖe eŋu nyuie o, wòaƒu blewu eye wòasisi ɖe eŋu. Ele be nuƒlelawo nade dzesi akpa si wofa nu ɖo nyuie hafi awɔe.
Media ƒomevi, woƒe lolome, nuŋlɔtsi ƒe kpekpeme, agbalẽtata ƒe duƒuƒu kple ɣeyiɣi si woatsɔ aƒui ate ŋu akpɔ ŋusẽ ɖe emetsonu mamlɛtɔ dzi. Ink ƒe nutsyɔtsyɔ fũ ate ŋu ana ɣeyiɣi si woatsɔ aƒu gbe ɖe edzi alo aɖe tsi ƒe tsitretsitsi dzi akpɔtɔ ne PVC-gbadzɛa ŋutɔ sɔ na inkjet tata gɔ̃ hã.
| Printer / Ink Factor | Nusiwo Dzi Nàɖo Ðo Hafi Nàbia Nu |
|---|---|
| Agbalẽtamɔ̃ ƒe Ŋkɔ kple Kpɔɖeŋu | Agbalẽtamɔ̃ ƒe nɔnɔme si sɔ pɛpɛpɛ tsɔ wu be nàŋlɔ agbalẽtamɔ̃a ƒe ŋkɔ ɖeɖeko |
| Media ƒe Titrime si sɔ gbɔ wu | Agbalẽtamɔ̃ ƒe nuɖuɖu ƒe seɖoƒe kple agbalẽtamɔ̃ ƒe ta ƒe ʋuʋu |
| Nuɖuɖu ƒe Mɔ | Megbe nuɖuɖu, nuɖuɖu dzɔdzɔe, tray alo mɔnu bubu si nye rigid-media |
| Ink Dzɔdzɔmeŋusẽŋununya | Amadede, amadede alo agbalẽtamɔ̃ tɔxɛ ƒe nuŋlɔtsi |
| Akpa si Woate Ŋu Ata | Nusi wofa axa ɖeka alo axa eve |
| Nukuku | Ɣeyiɣi si hiã be woatsɔ aƒu gbe hafi aɖoe ɖe wo nɔewo dzi, atsɔe awɔ dɔe alo aƒo wo nu ƒu |
| Dɔwɔwɔ si Wowu Nu | Tsi, ƒoƒo, abrasion, atike kple UV ƒe nudidiwo |
Vovototo sia le vevie na nuƒlela ɖesiaɖe si gblɔa inkjet media siwo me tsi mate ŋu age ɖo o. PVC-gbadzɛ ŋutɔŋutɔ ate ŋu ado dzi le tsi ƒe kadodo me nyuie wu pepa, gake nɔnɔmetata si wota la gakpɔtɔ nye nuŋlɔtsi kple nusi wotsɔ blae ƒe ƒuƒoƒo.
| Dɔwɔwɔ ƒe Nuto | Nu Vevi Siwo Kpɔa Ŋusẽ Ðe Edzi |
|---|---|
| PVC Substrate Tsi ƒe Tsitretsitsi | PVC-nu ŋutɔ mexɔa tsi abe pepa ene o |
| Nɔnɔmetata si Wota Tsi ƒe Tsitretsitsi | Ink ƒe atikewɔwɔ, xɔxlɔ̃ ƒe nutsyɔnu, ɣeyiɣi si wotsɔ ƒua gbe kple ink ƒe kpekpeme |
| Tsitretsitsi ɖe Ʋuʋudedi Ŋu | Ink adhesion, coating sesẽ kple overlay takpɔkpɔ |
| Amadede ƒe Liƒo le Gbedoxɔ Me | Ink UV tsitretsitsi, yame ƒe nɔnɔme kple ametakpɔnu nuwuwu |
| Atikewo ƒe Tsitretsitsi | Ink, coating, dzadzɛnyenye atike kple laminate wɔwɔme |
| Ɣeyiɣi Didi ƒe Anyinɔnɔ | Kpekpeɖeŋugbalẽvi ƒe nɔnɔme blibo, eŋudɔwɔwɔ, nutoa me kple ametakpɔnu ƒe nutsyɔnu |
Le dɔ sesẽwo wɔwɔ gome la, zi geɖe la, kaɖi ƒe xɔtunu siwo wotsɔ lãgbalẽ wɔe la kpɔa nɔnɔmetata si wota la ta le ŋutilã me nyuie wu be woagblẽ inkjet ƒe akpa aɖe ɖi wòadze keŋkeŋ.
Inkjet PVC gbalẽviwo ɖea mɔ na kaɖiwɔlawo be woata dɔwɔlawo ƒe fotowo, ŋkɔwo, dzesidexexlẽdzesiwo, dɔwɔƒea ƒe dzesiwo, barcodewo kple nɔnɔmetata bubu siwo wowɔ na ame ŋutɔ hafi awu kaɖia nu.
Kluviwo, nudzralawo, kamedefefewɔƒewo kple subɔsubɔdɔwɔƒewo ate ŋu azã PVC kaɖi ƒe xɔtuɖoɖo siwo wota na hamevinyenye kple nuteƒewɔwɔ ƒe ɖoɖo siwo bia be woawɔ nusi anɔ anyi didi wu ɖe pepa dzi kaɖi teƒe.
PVC si woate ŋu ata doa alɔ nɔnɔmetata siwo wowɔ ɖe ɖoɖo nu na nunana gbalẽviwo, boblododogbalẽviwo, wɔna ƒe mɔɖegbalẽviwo, asitsatsa gbalẽviwo kple plastic kaɖi ƒe ɖoɖo siwo ŋu ŋkɔ le.
Sukuwo, hehenahabɔbɔwo, takpekpewo kple ɖeɖefiawo ateŋu azã PVC si woateŋu ata kple inkjet hena dzesidegbalẽviwo, amedzrowo ƒe mɔɖegbalẽviwo kple gomekpɔlawo ƒe agbalẽvi siwo hiã be woata foto alo nyatakaka siwo trɔna.
Le agbalẽa ƒe nɔnɔme kple agbalẽtata ƒe ɖoɖoa nu la, woate ŋu ada PVC si wofa hã kpɔ hena xɔme dzesiwo, dzesidegbalẽviwo, nyatakakagbalẽviwo kple plastik ƒe akpa siwo wota ɖe ɖoɖo nu. Ele be gotadɔwo naɖo kpe UV ƒe liƒo kple yame ƒe nɔnɔme ƒe dɔwɔwɔ dzi ɖe vovo.
Kpɔe ɖa be woazã inkjet PVC agbalẽa abe nu vevi si wota, gotagome agbalẽ si woate ŋu ata alo kaɖi ƒe xɔtuɖoɖo bubu si wotsɔ laminated wɔ ƒe akpa aɖe ene. Xɔtutuae ɖoa titrime si hiã kple afisi woatsɔ nu atsyɔe.
Na nuɖuɖu agbalẽvi ƒuƒlu geɖe to agbalẽtamɔ̃ si nètia dzi be nàɖo kpe edzi be mɔ̃a ate ŋu atsɔ nu sesẽa ta ƒoƒo, glidzaglidza, ƒoƒo alo nuɖuɖu nana vodada aɖeke manɔmee.
Ðo nyadzɔdzɔgblɔmɔnuwo ƒe nɔnɔme si sɔ, nɔnɔmetata ƒe lolome kple nuŋlɔtsi ƒe kpekpeme, emegbe nàtae ɖe anyigba si woɖo be wofae la dzi. Na nɔnɔmetata la naƒu keŋkeŋ hafi nàƒoe ɖe wo nɔewo dzi alo nàgatrɔ asi le eŋu.
Le kaɖi si wotsɔ laminated wɔe gome la, ƒo agbalẽ si wota la nu ƒu kple PVC si wofa ɖe eŋu si sɔ kple PVC ƒe nu vevi ɖesiaɖe si hiã. Nusi wotsɔ tsyɔ wo dzi ate ŋu akpɔ nɔnɔmetata siwo wota ta tso woƒe ʋuʋu tẽ kple wo ŋudɔwɔwɔ edziedzi me.
Ele be woatsɔ lamination ƒe dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si woatsɔ anɔ anyi la nasɔ kple nusiwo wotsɔ ƒo ƒui bliboa. Ele be ink la nanɔ te sesĩe le dzoxɔxɔ kple nyaƒoɖeamenu ƒe nɔnɔme siwo nètia me evɔ amadedea ƒe tɔtrɔ, gbagbã alo ʋuʋu fũu akpa manɔmee.
Woate ŋu atso agbalẽ siwo wotsɔ lãgbalẽ wɔe la alo aƒo wo ɖe agbalẽvi si wowu enu ƒe didime si hiã la nu. Woate ŋu atsɔ ame ŋutɔ ƒe tɔtrɔ bubuwo abe xexlẽdzesiwo, QR-kɔdawo, barcodewo alo kaɖi ƒe nɔnɔme bubuwo akpe ɖe eŋu le alesi wowɔe nu.
| Factor | Laminated xɔtuɖoɖo | No-Overlay xɔtuɖoɖo |
|---|---|---|
| Anyigba si Wota | Wokpɔ eta le nutsyɔnu si sɔ te | Agbalẽtata gakpɔtɔ le ʋuʋu ɖi |
| Abrasion Takpɔkpɔ | Zi geɖe la, ekɔ wu le ametakpɔnu ƒe ƒuƒoƒo ta | Enɔ te ɖe nuŋlɔtsi kple nusi wotsɔ blae ƒe anyinɔnɔ dzi tẽ |
| Afɔɖeɖe Siwo Wowɔna | Ebia be woatsɔ nutsyɔtsyɔ kple lamination | Ate ŋu aɖe dɔwɔwɔ ƒe afɔɖeɖewo dzi akpɔtɔ |
| Kpekpeɖeŋugbalẽvi ƒe Titrime | Wotue tso ƒuƒoƒo vovovowo me | Enɔ te ɖe agbalẽvi si woate ŋu ata alo agbalẽvi si wowu enu ƒe xɔtutu dzi |
| Nusi Sɔ Nyuitɔ Kekeake | Kpekpeɖeŋugbalẽvi siwo hiã be woakpɔ anyigba dzi takpɔkpɔ geɖe wu | Dɔdamɔnu siwo ŋu woda asi ɖo na inkjet ƒe anyigba si woɖe ɖe go |
Ele be woatia no-overlay dɔwɔwɔ ne woɖo kpe ink ƒe ƒoƒo ɖe nu dzi, tsi ƒe tsitretsitsi, dzadzɛnyenye ƒe tsitretsitsi, ʋuʋudedi ƒe nuwɔna kple subɔsubɔ ƒe agbenɔƒe si wokpɔ mɔ na le zazã ŋutɔŋutɔ ƒe nɔnɔmewo me vɔ megbe ko.
| Feature | Coated Inkjet PVC | Dzɔdzɔe Uncoated PVC | Pepa / Kpekpeɖeŋugbalẽvi |
|---|---|---|---|
| Tsi me Inkjet Tata | Wotrɔ asi le eŋu na agbalẽtata si sɔ kple inkjet | Zi geɖe la, mesɔna ne womewɔ atike ɖe anyigba dzi o | Zi geɖe la, woate ŋu atae |
| Tsitretsitsi ɖe Tsidzadza Ŋu | PVC gɔmeɖoanyi tsi tre ɖe tsidzadza ŋu | PVC gɔmeɖoanyi tsi tre ɖe tsidzadza ŋu | Enɔ te ɖe pepa si wotsɔ blae kple lamination dzi |
| Sesẽmewɔwɔ | Esɔ na plastik-kaɖiwo tutu | Esɔ na PVC dɔ geɖe wɔwɔ | Enɔ te ɖe pepa ƒe kpekpeme kple xɔtutu dzi |
| Lamination | Woate ŋu atsɔe awɔ ɖeka kple PVC kaɖi ƒe xɔtuɖoɖo siwo sɔ me | Zi geɖe la, wowɔa laminated le plastic dɔwɔwɔ me | Ebia be woawɔ laminate-ɖoɖo vovovowo |
| Viɖe Gbãtɔ | Etsɔa inkjet tata kple plastic-card ƒe nɔnɔmewo ƒoa ƒui | PVC ƒe dɔwɔwɔ le mɔ gbadza nu | Agbalẽtata si wozãna ɖaa si ƒe asi bɔbɔ |
Ele be nusi wotsɔ blaa nu la nawɔ ɖeka le agbalẽa ƒe akpa si woate ŋu azã la katã. Nutsyɔtsyɔ si mesɔ o ate ŋu ana vovototo nanɔ amadede ƒe tsɔtsɔme, eƒe ƒuƒu ƒe duƒuƒu kple nɔnɔmetata ƒe dzedzeme me.
Nusi ƒe titrime li ke kple eƒe gbadzaa kpena ɖe nuawo ŋu wòɖua nu ɣesiaɣi to agbalẽtamɔ̃wo kple kaɖiwo ŋuti dɔwɔnuwo dzi. Curl si gbɔ eme ateŋu ahe nuɖuɖu, agbalẽtamɔ̃ alo ŋkɔ ŋɔŋlɔ ƒe kuxiwo vɛ.
Ele be woada kpɔɖeŋu si wota la kpɔ le ɣeyiɣi si wobia be woatsɔ aƒui vɔ megbe. Nuƒlelawo ate ŋu alé ŋku ɖe asitutu, ƒoƒo kple tepe ƒe adhesion ŋu to dodokpɔmɔnu si sɔ ɖe kaɖi si wowu enu ƒe nudidi nu zazã me.
Ele be woawɔ tsi dodokpɔ le kpɔɖeŋu si wota ŋutɔŋutɔ dzi tsɔ wu be woawɔe le PVC-gbadzɛ ƒuƒlu la ko dzi. Ele be dodokpɔ ƒe nɔnɔmewo naɖe subɔsubɔ ƒe nɔnɔme si woɖo be woawɔ la afia.
Ne woatsɔ laminated agbalẽvia la, do nɔnɔmetata si wota la kpɔ le dzoxɔxɔ kple nyaƒoɖeamenu megbe. Ele be woalé ŋku ɖe kaɖia ŋu be amadede ƒe tɔtrɔ, nɔnɔmetata ƒe gbagbã, bubbles, delamination kple edge quality hã.
Woate ŋu adzro agbalẽ ƒe didimewo me le asisi la ƒe agbalẽtamɔ̃, laminator kple kaɖi wɔwɔ ƒe ɖoɖo nu. Ne wotrɔ asi le agbalẽa ƒe lolome ŋu nyuie wu la, ate ŋu aɖe gbeɖuɖɔ siwo wotsona dzi akpɔtɔ eye wòana ewɔwɔ nanyo ɖe edzi.
Titrime si sɔ nɔ te ɖe nenye be wota nusi wotsɔ wɔe la tẽ, wotsɔ PVC-kplu bubuwo ƒo xlãe alo wozãe abe kaɖi ƒe xɔtuɖoɖo si wowɔ vɔ ƒe akpa aɖe ene dzi. Ðo kpe edzi ɣesiaɣi be agbalẽtamɔ̃a ate ŋu ana nuɖuɖu ƒe titrime si nètia.
Ele be nuƒlela siwo hiã be woata agbalẽ ɖe akpa eve dzi nagblɔe kɔte nenye be ele be woatsɔ nusi axɔ inkjet la nanɔ anyigba eveawo siaa dzi. Akpa ɖeka kple axa eve ƒe xɔtutuwo ate ŋu anye esiwo ƒe nuwɔwɔ ƒe nudidi vovovowo.
Wallis ate ŋu aƒo nu tso PVC kaɖi ƒe xɔtuɖoɖo siwo ƒoa agbalẽvi si woate ŋu ata to inkjet dzi kple PVC ƒe nuto si sɔ kple nusiwo wotsɔ tsyɔ edzi siwo wofa nu ƒu ɖekae ŋu. Dodokpɔ bliboa ƒe wɔwɔme kpena ɖe ame ŋu be woaɖe kuxi siwo dona tso nusiwo sɔ kple wo nɔewo me dzi akpɔtɔ le kaɖiwo wɔwɔ me.
Wallis naa PVC kaɖi ƒe nuzazãwo na kaɖi dɔwɔƒewo, agbalẽtadɔwɔƒewo, ID ƒe kuxiwo gbɔkpɔnu nana, kaɖi mamalawo kple dukɔwo dome B2B ƒlelawo. Le esi teƒe be woada PVC-gbalẽvia kpɔ abe agbalẽtata ƒe nusi woɖe ɖe aga ene ko la, woate ŋu ato dɔa me ɖekae kple agbalẽtamɔ̃ ƒe sɔsɔ, kaɖi ƒe wɔwɔme, lamination kple kaɖi si wowu enu ƒe nudidiwo.
PVC-nu si wotsɔ inkjet ƒoe hena kaɖi tata si wowɔ na ame ŋutɔ
Dekɔnu didime kple titrime numedzodzro
Akpa ɖeka kple axa eve ƒe nutsyɔtsyɔ tiatia le nɔnɔme tɔxɛwo nu
Kpɔɖeŋu dodokpɔ kple asisi ƒe agbalẽtamɔ̃ kple ink
Laminated kple no-overlay dɔwɔwɔ ƒe ɖoɖo ƒe dodokpɔ
Kpekpeɖeŋugbalẽvi si sɔ kple nu vevi si wotsɔ tsyɔ nu dzi
Custom lãɖeɖe kple bulk B2B nana
Nubablɛwo ɖoɖo ɖe duta hena dukɔwo dome dɔdɔ
| Nyatakaka | Nusiwo Woana |
|---|---|
| Mᴐbibia | ID gbalẽvi, hamevinyenye gbalẽvi, nunana gbalẽvi, wɔnaa ƒe agbalẽvi, tag alo nu bubu aɖe |
| Agbalẽtamɔ̃ | Brand kple model xexlẽdzesi si sɔ pɛpɛpɛ |
| Ink | Amadede, amadede alo nuŋlɔtsi ƒomevi bubu |
| Agbalẽvi ƒe Agbɔsɔsɔme | A4, A3-ƒomevi alo didime × kekeme si wowɔ ɖe ɖoɖo nu |
| Eƒe titrime | Titrime si hiã kple agbalẽtamɔ̃ ƒe mɔ̃wo ƒe seɖoƒe |
| Agbalẽtata ƒe Axawo | Akpa ɖeka alo akpa eve ƒe agbalẽtata kple nuŋlɔtsi |
| Kpekpeɖeŋugbalẽvi ƒe Dɔwɔɖoɖo | Wometsɔ nutsyɔnu, xɔtunu si wotsɔ laminated alo kaɖi ƒe nɔnɔme bubu aɖeke kpe ɖe eŋu o |
| Kpekpeɖeŋugbalẽvi si Wowu Nu | Wowu eƒe titrime, didime kple dzogoe ƒe didime |
| Dᴐwᴐwᴐ | Tsi, ʋuʋudedi, ʋuʋudedi, UV alo atikewo ƒe tsitretsitsi ƒe nudidiwo |
| Agbɔsɔsɔ | Kpɔɖeŋu ƒe nudidi, dodokpɔ ƒe agbɔsɔsɔme kple agbɔsɔsɔme si wokpɔ mɔ na |
Ðo Wò Inkjet PVC Card ƒe Nudidiwo ɖa
Ele be woakpɔ PVC gbadzɛ siwo woate ŋu ata to inkjet dzi ta tso ke, tsidzadza, woƒe bɔbɔ, woƒe ʋuʋu kple woƒe anyigba ƒe ɖiƒoƒo me le wo dzadzraɖo kple wo tsɔtsɔ yi teƒe bubuwo me elabena nusiwo gblẽ le nusi woate ŋu ata ŋu ate ŋu akpɔ ŋusẽ ɖe nɔnɔmetata ƒe nyonyome dzi tẽ.
Wallis ate ŋu ana takpɔkpɔ agbalẽ babla, kakɛwo kple duta pallet babla le agbalẽa ƒe didime, agbɔsɔsɔ kple meliɖoɖo ƒe nudidiwo nu. Ele be woatre nuawo nu le xɔme nɔnɔme dzadzɛ siwo me tsi mele o me vaseɖe esime wòahiã be woatae.
Enye PVC-gbadzɛ sesẽ si ƒe akpa si wodzra ɖo etɔxɛe si xɔa nuŋlɔtsi si na be ink-ink siwo sɔ la te ŋu taa nu nyuie wu alesi woawɔe le PVC dzro siwo womefa o dzi.
Ne nusi sɔ si woate ŋu ata le PVC la ŋu eye agbalẽtamɔ̃a ate ŋu ana nuɖuɖu nusi nètia ŋutɔŋutɔ ko hafi. PVC dzro si womefa o ate ŋu ana ink naƒo ƒu, asisi alo malé ɖe eŋu o.
Woateŋu azã Epson, Canon kple inkjet agbalẽtamɔ̃ tiatia aɖewo kple PVC nyatakakamɔ̃ siwo wofa ɖe wo ŋu, gake woƒe sɔsɔ nɔ te ɖe agbalẽtamɔ̃ ƒe nɔnɔme tututu, ink ƒe atikewɔwɔ, nuɖuɖu ƒe mɔ kple nyadzɔdzɔwo ƒe titrime si sɔ gbɔ wu dzi. Ðo kpɔɖeŋu ƒe xexlẽdzesi ɖa be woadae kpɔ hafi nàbia.
Amadede ƒe nuŋlɔtsi ate ŋu asɔ kple nutsyɔnu tiatia aɖewo, gake ele be woadoe kpɔ hafi woawɔ eƒe lolome. Amadede kple amadede ƒe nuŋlɔtsiwo ate ŋu anye esiwo ƒe ƒuƒu, amadede kple tsi ƒe tsitretsitsi ƒe nɔnɔme vovovowo.
Zi geɖe la, wozãa inkjet ink siwo wotsɔ amadede wɔe kple PVC-gbadzɛ siwo wofa ɖe wo nɔewo ŋu siwo sɔ. Agbalẽtata ƒe nyonyome ŋutɔŋutɔ kple tsi ƒe tete nɔ te ɖe nuŋlɔtsi ƒe wɔwɔme, nusi wotsɔ blae kple agbalẽtamɔ̃ ƒe ɖoɖowo dzi.
Menye le eɖokui si o. PVC substrate la te ŋu nɔa te ɖe tsi nu, gake tsi ƒe tsitretsitsi ɖe nɔnɔmetata si wota ŋu nɔ te ɖe nusi xɔa nu, ink ƒe atikewɔwɔ, ƒuƒu kple nuwuwu mɔnu dzi. Do kpɔɖeŋu si wota vɔ la kpɔ ne ehiã be wòawɔ dɔ si me tsi mate ŋu age ɖo o.
Gbedoxɔ me zazã bia nu geɖe wu tsi ƒe tsitretsitsi ko. Ele be woatsɔ ink ŋutɔŋutɔ kple xɔtuɖoɖo si wowɔ vɔ ado UV ƒe fading, dzoxɔxɔ, abrasion, tsidzadza kple atikewo ƒe dɔwɔwɔ kpɔ. Woate ŋu ahiã be woatsɔ nutsyɔnu alo ametakpɔnu aɖo gotagome dɔwɔwɔ siwo bia vevie.
Woate ŋu ata agbalẽ ɖe akpa eve dzi ne wotsɔ atike si sɔ si xɔa inkjet la wɔ akpa eveawo siaa. Gblɔ akpa ɖeka alo akpa eve ƒe agbalẽtata ne èle ga home biam.
Ɣeyiɣi si woatsɔ aƒu gbe nɔ te ɖe nuŋlɔtsi, nusi wotsɔ blae, agbalẽtata ƒe kpekpeme, dzoxɔxɔ kple fafa dzi. Na ink la nali ke bliboe le agbalẽtata ƒe ɖoɖo si wodo kpɔ nu hafi nàƒo agbalẽawo nu ƒu alo aƒo wo nu ƒu.
Ɛ̃. Woate ŋu azã wo le PVC kaɖi-lamination xɔtuɖoɖo siwo sɔ me kple nutsyɔnu si sɔ si wofa ɖe nu dzi kple nu veviwo. Ele be woatsɔ ink si wota ŋutɔŋutɔ ado lamination ƒe dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi kpɔ.
Inkjet PVC agbalẽa tsɔa nɔnɔmetata si wota la. PVC ƒe nutsyɔnu nye ametakpɔnu si me kɔ si wotsɔ lãgbalẽ wɔe ɖe nusi wota la dzi. Nusiwo wotsɔ blaa nu aɖewo hã nɔa nusiwo wotsɔ blaa nu siwo wɔa dɔ le lamination me.
Ɛ̃. Woate ŋu adzro didime siwo wowɔ ɖe ɖoɖo nu me le agbalẽtamɔ̃ ƒe nuɖuɖu ƒe lolome, laminating ƒe ɖoɖo kple kaɖi si wowu enu ƒe nudidiwo nu.
Ɛ̃. Ne wotae kple lamination ɖesiaɖe si hiã vɔ la, woate ŋu atso nuawo, aƒo wo alo atsoe wòazu kaɖiwo kple nɔnɔme bubuwo to kaɖiwɔnu siwo sɔ zazã me.
Menye le dɔwɔwɔ ɖesiaɖe me o, gake lamination ate ŋu ana takpɔkpɔ nanyo ɖe edzi ŋutɔ. Ne woɖo kpe edzi be agbalẽtata si woɖe ɖe go la ɖo tsi, ʋuʋudedi, dzadzɛnyenye kple agbenɔƒe ƒe agbenɔƒe ƒe nudidiwo gbɔ ko hafi woada asi ɖe agbalẽvi siwo dzi wometsɔ nu tsyɔ wo dzi o dzi.
Zã axa si wofa nyuie, ink si sɔ, agbalẽtamɔ̃ ƒe ɖoɖo siwo sɔ kple ink ƒe kpekpeme si dzi wokpɔna. Na nɔnɔmetata la naƒu keŋkeŋ eye nàƒo asa na agbalẽwo ƒoƒo ƒu ɖekae esime nuŋlɔtsi la gakpɔtɔ le tsi.
Ɛ̃. Wokafu kpɔɖeŋu dodokpɔ vevie ale be nuƒlelawo nate ŋu alé ŋku ɖe agbalẽtamɔ̃ ƒe nuɖuɖu, amadedewo gbugbɔgawɔ, ƒuƒu, ink ƒe ƒoƒo, tsi ƒe tsitretsitsi kple lamination ƒe ɖekawɔwɔ ŋu to woƒe dɔwɔnu ŋutɔŋutɔwo kple ink zazã me.
Na dɔbiagbalẽvia, agbalẽtamɔ̃a ƒe ŋkɔ kple eƒe nɔnɔme, nuŋlɔtsi ƒomevi, agbalẽa ƒe lolome si wobia, eƒe titrime, akpa ɖeka alo akpa eve tata, kaɖi ƒe xɔtutu, lamination ƒe nudidi, dɔwɔwɔ ƒe nudidi, agbɔsɔsɔme kple dukɔ si me woayi.
Èle PVC gbalẽvi si wofa ɖe nu ŋu dim na inkjet ID gbalẽviwo, hamevinyenye gbalẽviwo, nunana gbalẽviwo alo plastic tata si wowɔ na wò ŋutɔ? Ðo wò agbalẽtamɔ̃ ƒe nɔnɔme, ink ƒomevi, agbalẽ ƒe lolome, titrime, kaɖi ƒe wɔwɔme kple agbɔsɔsɔ si wobu la ɖe Wallis. Míaƒe ƒuƒoƒoa ate ŋu akpe asi ɖe eŋu be woada PVC inkjet nusi sɔ kpɔ hafi woawɔe le asitsatsa me.
