|
Wallis -Anti-Scratch PETG Sheet
Wallis
| Launi: | |
|---|---|
| Yawan: | |
Wallis anti-scratch PETG / GAG / PET fim don MDF lamination an ƙera shi don masana'antun kayan furniture, masana'antun kayan ado, masu kera majalisar, ƴan kwangilar ciki, samfuran OEM, masu shigo da kayayyaki, da masu rarrabawa waɗanda ke buƙatar tsayin daka da daidaito na gani.
Laminating fim ɗin a kan ingantaccen kayan aikin MDF da aka shirya yadda ya kamata ya haifar da kammala kayan ado don ƙofofin majalisar, riguna, rufin bango, kabad ɗin TV, gaban aljihuna, nunin dillali, kayan ofis, aikin otal, da sauran wuraren zama ko na kasuwanci.
Maɗaukaki mai sheki, matte, bayyananne, tinted, da na'urorin gamawa na musamman. Jiyya na saman zaɓi na zaɓi na iya haɓaka juriya ga karce haske, tambarin yatsa, tabo, da tsaftacewa na yau da kullun, yayin da tsarin takarda da nadi suna tallafawa hanyoyin samar da kayan ɗaki daban-daban.
Nemi Samfurori da Farashin Masana'antu
| Kayayyakin Sama | Zaɓuɓɓukan fim ɗin PETG / GAG / PET |
| Core Substrate | MDF da sauran ingantattun kayan daki-panel substrates |
| Zaɓuɓɓukan gani | Babban sheki, matte, bayyananne, mai tinted, da launuka masu ban mamaki |
| Zaɓuɓɓukan Aiki | Anti-scratch, anti-sawun yatsa, mai jurewa, da kuma tsaftataccen magani |
| Tsarin Kaya | Fim a cikin rolls ko zanen gado; Ana iya tattauna buƙatun da aka gama-panel |
| Tallafin Mai siye | Samfurin yarda, gwaje-gwajen lamination, bita na ƙayyadaddun ƙayyadaddun bayanai, sarrafa inganci, da fakitin fitarwa zuwa fitarwa |
Fim mai ƙyalli yana haifar da tunani mai ƙarfi, zurfin launi, da kyakyawan bayyanar don gaban manyan ma'aikatun da kayan daki. Fim ɗin Matte yana ba da ƙananan tunani da kuma mafi kyawun yanayin zamani don ɗakunan tufafi, bangon bango, kayan ofis, da ƙananan ciki.
Fim mai haske ko mai launi na iya karewa da haɓaka bugu, mai launi, ƙarfe, hatsi, ko sauran kayan ado a ƙasan sa. Za'a iya haɓaka launuka masu ƙima na musamman don tarin kayan ɗaki, shirye-shiryen iri, cikin kasuwanci, da ayyukan maimaitawa.
Zaɓin jiyya mai taurin gashi na iya rage alamun ganuwa da ke haifar da sarrafa panel, tsaftacewa, shigarwa, da kuma amfani da kayan gida na yau da kullun. Babu wani farfajiyar filastik na ado da ke da cikakkiyar tabbaci, don haka ya kamata a yarda da hanyar gwaji, kaya, adadin hawan keke, da ka'idojin karɓa kafin yin oda.
Jiyya na saman na iya taimakawa rage alamun yatsa, alamomin mai, da tabo na cikin gida gama gari. Ya kamata a gwada ainihin launi na samarwa da ƙare saboda ganin hoton yatsa da aikin tsaftacewa ya bambanta da matakin mai sheki, haske, kusurwar kallo, sutura, da hanyar kulawa.
Sarrafa kauri na fim, lamination mai tsabta, da tsayayyen madaidaicin MDF suna taimakawa ƙirƙirar fage mai santsi tare da daidaiton launi da tunani. Dust, dents, maki baƙar fata, layukan mannewa, kumfa, da faifan telegraphing ya kamata a haɗa su cikin ma'aunin karɓar gani.
Layin Production na Fim na PETG
Ƙarshen Samfura don Kayan Ado
Wadannan dabi'u sun dogara ne akan ainihin bayanin samfurin. Dole ne a tabbatar da ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun samfuran da aka amince da su, tsarin fina-finai, ƙasa, m, hanyar lamination, da yarjejeniyar siyan.
| Samu | Takaddamawar Abun da Yake |
|---|---|
| Sunan samfur | Anti-Scratch PETG/GAG/PET Fim wanda aka lika a kan Panels na Ado na MDF |
| Tsarin Fim | Zaɓuɓɓukan fim ɗin PETG / GAG / PET; tsarin karshe na karshe dangane da tabbatar da fasaha |
| Yawan yawa | Kimanin 1.37 g / cm 3; don ma'aunin ma'aunin da aka bayyana; tabbatar da tsarin abu |
| Tsarin | Tsarin ƙira da takarda |
| Kaurin Fim | 0.25 mm - 1.0 mm |
| Girma | 1220 × 2440 mm takardar zaɓi; Zaɓuɓɓukan faɗin 1250 mm da 1260 mm; masu girma dabam wanda za a bita |
| Ƙarshen Sama | Babban mai sheki ko matte tare da abin rufe fuska na zaɓi na zaɓi |
| Bayyanar | Maɓalli, masu baƙar fata, ko keɓantattun launuka masu banƙyama |
| Zaɓuɓɓukan Sama | Mai jurewa, tsaftataccen sawun yatsa, mai jurewa, da tsaftataccen magani |
| Daidaituwar Substrate | MDF, allon PVC, allon ado, allon kayan daki, da sauran ingantattun bangarorin ciki |
| Hanyoyin sarrafawa | Flat lamination, zafi matsi, bonding, yankan, CNC aiki, da kuma zaɓaɓɓen forming bayan inganci |
| Aikace-aikace | Furniture gaban, kofofin hukuma, wardrobes, bangon bango, nune-nunen dillalai, kayan ofis, da dakunan baƙi |
| Keɓancewa | Tsarin fim, kauri, nisa, tsayi, launi, ƙare, shafi, fim mai kariya, lakabi, da fakitin fitarwa |
MDF da aka zaɓa da kyau da kuma sharadi yana ba da madaidaicin madauri don lamination na ado. Girman allo, abun ciki na danshi, ingancin sanding, flatness, haƙuri mai kauri, da tsaftar saman ƙasa kai tsaye suna rinjayar bayyanar da aka gama da ƙarfin haɗin gwiwa.
Fina-finan iyali na PETG suna ba da haske mai sheki, matte ɗin rubutu, bayyananniyar haske, tint, ko launi yayin da suke kare shimfidar kayan ado a ƙasa. Fim ɗin zai iya taimakawa wajen ƙirƙirar yanayin zamani ba tare da dogara ga yawan feshi-shafi, bushewa, yashi, da matakan gogewa ba.
Fanalan kayan daki masu tsayayye na iya buƙatar ma'auni mai daidaitawa a gefen baya, madaidaicin bandeji mai dacewa, manne da aka zaɓa daidai, da yanayin latsawa mai sarrafawa. Waɗannan abubuwan suna taimakawa rage warping, layukan manne da ake iya gani, gazawar gefe, shigar danshi, da bambance-bambance tsakanin fuska da juyawa.
Ayyukan fina-finai maras kyau ba ta kai tsaye daidai da aikin laminated MDF panel. M, matsa lamba, zafi, yanayin ƙasa, daidaita Layer, gefen jiyya, da ajiya na iya shafar juriya, flatness, halin danshi, da bayyanar.
Anti-scratch coatings an yi nufin rage haske scratches da abrasion daga talakawa handling da tsaftacewa. Ya kamata masu siye su tantance ko gwaji yana amfani da taurin fensir, ulun karfe, ƙafar ƙafafu, hanyar daɗaɗɗen kayan aiki, ko daidaitaccen gani na ciki.
Ƙarshen yatsa da tabo na iya rage alamun mai da ake iya gani da sauƙaƙe tsaftacewa, amma sakamakon ya bambanta da launi, mai sheki, sutura, jagorancin haske, matsa lamba, da kuma gurɓataccen abu. Yi kimanta ainihin ƙarewar samarwa maimakon dogaro da samfuri na yau da kullun.
Dacewar aikace-aikacen ya dogara da dukkan ginin panel. Ya kamata a gwada dafa abinci, dakunan wanka, counters, da wuraren kasuwanci don zafi, rufe baki, masu tsaftacewa, tabon abinci, samfuran da ke ɗauke da barasa, zafin jiki, da lokacin hulɗa.
Fuskokin majalisar ministoci da bangon bango suna fuskantar lodi daban-daban daga teburi, tebura, kirga, da saman aiki. Amfani a kwance yana buƙatar ƙarin kimantawa na abrasion, zafi, tasiri, lodin batu, sinadarai, da tsawan lokaci tuntuɓar abu.
Samfurin PETG da aka gama
Layin Production na PETG 1
Layin Production na PETG 2
Tabbatar da darajar MDF, kauri na allo, girman panel, fim ɗin fuska, juzu'i mai daidaitawa, ɓangarorin gefen, abin da aka gama, ficewar da ake tsammanin, ƙarewar saman, da gwaje-gwajen aiki da ake buƙata.
Yi amfani da lebur, mai tsabta, bushe, da yashi daidai da MDF tare da kwanciyar hankali abun ciki. Cire ƙura, mai, zaruruwa marasa ƙarfi, haƙora, da gurɓataccen ƙasa kafin amfani da manne ko shigar da layin lamination.
Zaɓin manne ya dogara da yanayin juyawa na fim ɗin, abubuwan MDF, nau'in latsawa, zazzabi, matsa lamba, saurin layi, lokacin buɗewa, yanayin warkewa, zafi, da buƙatun amfani na ƙarshe. Ya kamata a tabbatar da mannewa bayan sharadi da tsufa.
Bincika ainihin launi na samarwa, mai sheki, matte matte, nuna gaskiya, shafi, fim mai kariya, kauri, bayyanar MDF, juzu'i na baya, da kuma gefen gefen masana'anta, ɗakin nunin, da hasken shigarwa na ƙarshe.
Tabbatar da ƙarfin haɗin gwiwa, kumfa, layukan mannewa, shimfidar ƙasa, daidaituwa mai sheki, launi, datsa, mannewa gefen, cire fim ɗin kariya, ma'auni na panel, halayen tabo, cire tabo, da tsaftacewa.
Bada izinin manne da panel su daidaita bisa ga umarnin mai kaya. Duba lebur panel, bond, bayyanar saman, ingancin gefen, girma, da aiki bayan lokacin daidaitawa.
Tattauna Tsarin Lamination na MDF ɗinku
Ana iya amfani da MDF mai ƙyalƙyali da matte PETG laminated don ƙofofin majalisar, gaban tufafi, fuskokin aljihun tebur, ɗakunan ajiya, fanonin gefen bayyane, da tarin kayan daki masu daidaitawa. Ya kamata a yi la'akari da rufewar gefen gefe da bayyanar danshi yayin zane.
Ana iya amfani da fale-falen kayan ado don bangon fasali, bangon TV, ciki na otal, wuraren liyafar ofis, wuraren sayar da kayayyaki, cikin gida, da tsarin bango-da-gida masu daidaitawa.
Kayan gyare-gyaren tallace-tallace, raka'o'in nuni, ƙididdiga, shelves, nunin samfura, fatuna masu alama, da kayan nuni suna fa'ida daga launukan da za a iya daidaita su da kuma shimfidar ado mai sauƙi mai tsafta.
Za'a iya keɓance bangarorin PETG don teburi, kayan liyafar liyafar, aikin otal, kayan cikin gidan abinci, ajiyar ofis, ɓangarori, kayan ɗaki, da sauran abubuwan cikin gida da ake sarrafa akai-akai.
Aikace-aikace a kwance suna buƙatar madaidaicin makin gashi da gwajin fakitin da aka gama. Yi ƙididdige ɓarna, ƙaddamar da batu, zafi, sinadarai, tasiri, bayyanuwar gefen, samfuran tsaftacewa, da tuntuɓar abu na dogon lokaci kafin amincewa.
PETG Kitchen Cabinet
Matte PETG Kayan Gidan Abinci
| Tasirin Kayayyakin Zaɓuɓɓuka na | Kayayyakin Kayayyakin | Na Musamman | Kayayyakin Maɓalli |
|---|---|---|---|
| Babban sheki | Ƙarfin tunani, zurfin launi, da kyakyawan bayyanar | Gaban majalisar ministoci, akwatunan TV, nunin kayayyaki, da kayan daki na ƙima | Kyakkyawan tunani, lebur, ƙura, karce, layin manne, da daidaiton launi |
| Matte | Ƙananan tunani, laushi mai laushi, da salo na zamani | Wardrobes, ofisoshi, bangon bango, da ƙaramin kayan daki | Iri ɗaya mai sheki, taɓawa, ganin hoton yatsa, cire tabo, da karce |
| m / Tinted | Nunawa da kare bugu, launi, hatsi, ko Layer na ƙarfe a ƙasa | Filayen kayan ado masu ɗorewa, kayan ƙayyadaddun kayan aiki, da kayan ɗaki masu tasiri na musamman | Haze, tint, canjin launi, tsabta, haɗawa, da gani mai ɗaurewa |
| Launi mara kyau | Uniform m-launi na ado saman | Tarin kayan marmari, shirye-shiryen majalisar ministoci, da ayyukan kasuwanci | Haƙurin launi, daidaiton tsari, daidaitawar gefe, sheki, da lahani |
Zaɓin kayan aiki yakamata ya dogara ne akan bayyanar da ake buƙata, dorewa, hanyar sarrafawa, daidaitaccen aikin, ƙarar, da kasafin kuɗi. Teburin da ke ƙasa jagora ne na gabaɗaya; yanke shawara na ƙarshe yakamata suyi amfani da samfuran jiki da gwaje-gwajen da aka gama.
| Factor Factor | PETG Fim akan MDF | Babban Matsi Laminate | Acrylic Fuskantar MDF | Fentin MDF |
|---|---|---|---|---|
| Bayyanar | Babban sheki, matte, m, tint, da launuka na al'ada | Faɗin kayan ado da kewayon rubutu | Ƙarfi mai ƙarfi da zaɓuɓɓuka masu sheki kamar madubi | Faɗin launi da sheen gyare-gyare |
| Production | Mirgine ko takardar lamination tare da tsari na zaɓi | Sheet bonding da panel matsi | M takardar lamination da machining | Rufewa, bushewa ko warkewa, yashi, da matakan ƙarewa |
| Resistance Surface | Ya dogara da shafi, kauri, tsarin fim, da hanyar gwaji | Ya dogara da matakin laminate da tsarin farfajiya | Ya dogara da acrylic grade da hard-coat tsarin | Ya dogara da sunadarai na fenti, kauri, curing, da shirye-shiryen substrate |
| Sassaucin ƙira | Fim na al'ada, mai rufin asiri, tint, mai sheki, matte, da zaɓaɓɓen ƙira | Faffadan bugu, laushi, da abubuwan da suka dace | Filayen filaye masu ƙima da zaɓaɓɓun abubuwan da aka haɗa da thermoformed | Launuka na al'ada da filaye masu fesa marasa sumul |
PETG, GAG, PET, da takamaiman tsarin fim na aikin
High-mai sheki, matte, m, tinted, da opaque-launi gama
Kaurin fim daga 0.25 mm zuwa 1.0 mm a cikin yuwuwar samarwa
Tsarin takarda 1220 × 2440 mm da zaɓuɓɓukan faɗin 1250 mm ko 1260 mm
Tsawon mirgine, tsayin takarda, faɗin tsaga, da gyare-gyaren girman girman
Anti-scratch, anti-sawun yatsa, mai jurewa, da kuma tsaftataccen magani
Fim ɗin kariya don lamination, yanke, ajiya, jigilar kaya, da shigarwa
Alamomin OEM, marufi tsaka tsaki, pallets fitarwa, da alamun jigilar kaya
Samfurori, lamination matukin jirgi, ƙayyadaddun ƙayyadaddun bayanai, da sarrafa maimaita oda
PETG da PET kayan aikin thermoplastic ne da za'a iya sake yin amfani da su, amma gamammen PETG-lamintaccen MDF samfuri ne na kayan abu da yawa. Ainihin sake yin amfani da su ya dogara da tsarin tarin gida, m, sutura, daidaitawa Layer, bandeji na gefe, abun da ke cikin MDF, da ko kayan za a iya raba.
Masu saye da maƙasudin muhalli ya kamata su ayyana buƙatun don abun ciki da aka sake yin fa'ida, iskar formaldehyde daga MDF, iskar da aka haɗa, ƙayyadaddun abubuwa, ƙarancin aikin VOC, marufi, da jiyya na ƙarshen rayuwa kafin samfurin yarda.
Tsarin fim ɗin da aka amince da shi, launi, mai sheki, rubutun matte, nuna gaskiya, da samfurin sutura
Kaurin fim, faɗin, tsayi, iska, shimfiɗar takarda, da duban ƙira
Duban gani don karce, haƙora, maki baƙar fata, kumfa, layin sutura, gurɓatawa, da haɗawa
Girman MDF, danshi, kauri, ingancin yashi, tsaftar saman ƙasa, da sake dubawa
Ƙarfin haɗin gwiwa, kumfa, layukan mannewa, ma'auni na panel, gefuna, da cire-fim mai kariya
Scratch, abrasion, tabo, sinadarai, danshi, da gwaje-gwajen zafi lokacin da aka haɗa su cikin ƙayyadaddun siyan
Yanke-panel yankan, hakowa, CNC machining, baki banding, da kuma taron gwaji lokacin da ake bukata
Marufi, pallet, yawa, lakabi, da tabbacin jigilar kaya
Tsaftace Taron Bita
Nagartattun Kayan aiki
Warehouse
Kundin Rubutun Kariya
Load ɗin fitarwa lafiya
Samar da B2B kai tsaye masana'anta don masana'antar kayan daki, laminators panel, ƴan kwangila, samfuran, masu shigo da kaya, da masu rarrabawa
Zaɓin zaɓin kayan sassauƙa wanda ke rufe PETG, GAG, PET, yi, takarda, bayyananne, mai tinted, matte, mai sheki, da zaɓuɓɓukan ɓoye.
Tallafin da aka mayar da hankali kan aikace-aikacen don shirye-shiryen MDF, zaɓin m, gwajin lamination, ma'auni na panel, da jiyya na gefe
Samfuri da ingantaccen matukin jirgi don launi, gamawa, haɗin kai, juriya, tsaftacewa, da bayyanar da aka gama
Ƙididdigar ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun kayan aikin fim, ingancin farfajiya, yanayin MDF, lamination, da marufi
Ƙimar girma da maimaita oda don tarin kayan ɗaki, shirye-shiryen panel na ado, da ayyukan kasuwanci
Fitar da marufi da sadarwar fasaha don jigilar kayayyaki na duniya da abokan cinikin OEM
Panel ɗin ado ne wanda aka yi ta hanyar haɗa PETG, GAG, PET, ko fim ɗin kayan daki mai alaƙa zuwa madaidaicin MDF. Fim ɗin yana ba da ƙarancin gani da ayyuka na sama, yayin da MDF ke ba da tushen tsarin tsarin.
Shafin da farko yana ƙayyadaddun fim a cikin nadi da sigar takarda don lamination MDF. Ya kamata a tabbatar da samar da da aka kammala ko tallafin sarrafawa tare da Wallis bisa ga darajar MDF, girma, daidaita Layer, buƙatun gefen, yawa, da kuma makoma.
Ee, ana iya kimanta waɗannan substrates don lamination. Daidaituwa ya dogara da yanayin juyawa na fim, yanayin hukumar, m, zafin jiki, matsa lamba, saurin layi, lokacin sake zagayowar, ginin panel, da kuma buƙatar aikin amfani na ƙarshe.
A'a. Jiyya mai wuyar gashi na iya inganta juriya ga tarkacen haske da lalata, amma kayan aiki masu kaifi, barbashi masu lalata, kaya mai yawa, da tsaftacewa mara kyau na iya lalata farfajiya.
Ana iya amfani da su don ɗakunan dafa abinci da kayan wanka na gidan wanka lokacin da darajar MDF, m, ma'auni na daidaitawa, rufe baki, samun iska, shigarwa, da hanyar tsaftacewa sun dace. Ba'a yi nufin daidaitattun fa'idodin MDF don nutsar da ruwa ba.
Ya kamata a kula da daidaitaccen samfurin azaman kayan ado na cikin gida. Amfani da waje yana buƙatar takamaiman ƙima na ainihin MDF, m, gefuna, bayyanar UV, ruwan sama, zafi, hawan zafin jiki, kwanciyar hankali launi, da buƙatun garanti.
Daidaitaccen fim ɗin PETG da daidaitaccen MDF bai kamata a ɗauka sun dace da ƙimar wuta ba. Ayyuka tare da buƙatun wuta dole ne su ayyana ma'auni masu dacewa, rarrabuwa, ƙasa, manne, ginin gefen, rahoton gwaji, da taron gama-gari kafin yin oda.
Zaɓuɓɓukan da ke akwai sun haɗa da babban mai sheki, matte, m, baƙar fata, da launuka masu ƙima. Hakanan za'a iya yin magana game da tsaga-tsara, sawun yatsa, mai jurewa, da tsaftataccen tsaftataccen jiyya.
Zaɓuɓɓukan tsarin fim na iya tallafawa lankwasawa mai zafi, matsawa, ko ma'aunin zafi. Rubutun sassauƙa, kauri, dumama, radius, zurfin zane, ƙirar ƙira, fim ɗin kariya, da sanyaya dole ne a inganta su a cikin gwaji na ƙira.
Yi amfani da mayafin microfiber mai tsafta da ruwa ko mai tsaftataccen tsaka tsaki. Kauce wa tarkace, dattin yadudduka, kayan aiki masu kaifi, da abubuwan kaushi. Gwada samfuran tsaftacewa da ba a sani ba a kan wani wuri mara sani da farko.
Fina-finan PETG da PET abubuwa ne da za'a iya sake yin amfani da su, amma rukunin da aka gama ya haɗu da fim, m, MDF, yadudduka na baya, da baƙar fata. Yiwuwar sake yin amfani da su ya dogara da kayan aikin gida da ko ana iya raba waɗannan kayan.
Samar da tsarin fim, launi ko samfurin tunani, ƙare, kauri, nisa, mirgine ko tsarin takarda, MDF daraja, m, hanyar lamination, girman panel da ake buƙata, yawan, makoma, marufi, da gwaje-gwajen aiki.
Ee. Ana ba da shawarar ƙima da ƙima na matukin jirgi don launi, mai sheki, rubutun matte, nuna gaskiya, juriya, ganin hoton yatsa, cire tabo, haɗin gwiwa, ingancin gefen, shimfidar panel, da tsaftacewa.
Aika Wallis tsarin fim ɗin ku da ake buƙata, ƙarewar saman, launi, kauri, girma, MDF substrate, hanyar lamination, aikace-aikacen da aka gama, buƙatun gwaji, ƙididdigar ƙima, da wurin isarwa. Ƙungiyarmu za ta sake nazarin zaɓuɓɓukan samfurin, ƙayyadaddun fasaha, marufi, da farashin masana'anta.
