|
Wallis - PVC Shet
Wallis
| Launi: | |
|---|---|
| Abu: | |
| fa'ida: | |
| Yawan: | |
Wallis yana ba da hatsin itace PVC nadi na fim ɗin kayan ado don fale-falen kayan ɗaki, kofofin majalisar ministocin MDF, ɗakunan tufafi, kofofin ciki, bangon bango, kayan ofis, bayanin martaba na ado, da sauran aikace-aikacen saman cikin gida. Fim ɗin yana sake haifar da yanayin gani na itace na halitta yayin da yake tallafawa ingantaccen lamination na masana'antu da samar da kayan aiki.
An ƙera shi don masana'antun kayan ɗaki, masana'antun majalisar, masana'anta na panel, masu rarraba kayan gini, da ƴan kwangilar kayan ado na ciki, Wallis PVC fim ɗin kayan ɗaki za a iya keɓance shi ta ƙirar hatsin itace, launi, rubutu mai ƙyalli, mai sheki, girman yi, da buƙatun sarrafawa.
Haqiqanin itacen oak, goro, maple, teak, ash, da ƙirar itacen al'ada
Dace da lebur lamination, Vacuum membrane pressing, da profile wrapping
Mai jituwa tare da MDF, allon barbashi, plywood, allon PVC , da bangarorin ado
Matte, m, embossed, santsi, super-matte, da musamman saman zažužžukan
Narkar da tsarin samar da kayan aiki masana'antu da girma samar
OEM daidaitaccen launi, haɓaka rubutu, da tallafin fakitin fitarwa zuwa fitarwa
Nemi Samfuran Hatsi na Itace da Quote
Itace hatsi PVC fim ɗin ado wani abu ne mai sassauƙa na polyvinyl chloride wanda aka buga kuma ya ƙare don sake haifar da launi, jagorar hatsi, kulli, pores, da zurfin gani na katako na halitta. Ana iya haɗa bugu, shafi, embossing, da jiyya na ƙasa don ƙirƙirar itacen oak, goro, maple, teak, ash, Pine, da sauran tasirin itace.
Fim ɗin an lulluɓe shi ko an kafa shi akan kayan kayan daki don ƙirƙirar saman kayan ado mai ci gaba. Idan aka kwatanta da veneer na halitta, PVC fim ɗin ado yana ba da ƙarin daidaiton launi da sarrafa tsari yayin da ke sauƙaƙe samar da manyan kayan daki-falaye.
Masana'antu PVC Fim ɗin lamination na kayan aiki galibi ana sarrafa shi tare da manne, zafi, matsa lamba, kayan miya, layukan lanƙwasa, ko injunan murɗa bayanan martaba. An yi niyya don masana'antar kayan ɗaki da ƙwararrun masu sarrafa panel.
Fim ɗin hatsin itace mai ɗaure kai ya haɗa da manne-matsi mai ɗaukar nauyi kuma an fi amfani dashi don gyare-gyare, gyare-gyare, kayan ado na tallace-tallace, ko ƙananan ayyukan haɓaka saman ƙasa. Masu saye ya kamata su tabbatar da hanyar aikace-aikacen da ake buƙata kafin zabar ginin fim.
Cikakkun bugu da haɗaɗɗiyar shimfidar wuri na iya haifar da madaidaiciyar hatsi, hatsin cathedral, pores, kulli, layin girma, da bambancin launi na yanayi. Wannan yana bawa masana'antun kayan aiki damar haɓaka tarin kamanni na itace ba tare da dogaro na musamman akan abin rufe fuska na halitta ba.
Sarrafa bugu da daidaita launi suna taimakawa tabbatar da daidaitaccen bayyanar gani a kofofin majalisar, fatunan tufafi, shelves, tebura, da abubuwan da suka dace da kayan daki. Ya kamata a tabbatar da ma'aunin launi da samfuran da aka yarda kafin samar da girma.
Filayen kayan ado da aka likad da su daidai da rufe baki PVC suna tsayayya da danshi na yau da kullun, tabon gida, da tsaftace yau da kullun. Wannan ya sa kayan ya dace da kayan cikin gida, kabad, riguna, bangon bango, da aikace-aikacen ciki na kasuwanci.
Roll-format wadata yana goyan bayan ci gaba da samarwa da ingantaccen kayan aiki. Dangane da yanayin fim ɗin da aka zaɓa, ana iya sarrafa shi ta hanyar lanƙwasa lebur, lamination mai zafi ko mai sanyi, latsawa na vacuum, nade bayanan martaba, da sauran hanyoyin kammala kayan ƙwararru.
PVC Fim ɗin kayan ɗaki baya buƙatar tabo, gogewa, sake fenti, ko maimaita hatimi. Ana iya kammala tsaftacewa na yau da kullun tare da yadi mai laushi da ingantaccen tsaftacewa mai laushi.
Ya kamata a zaɓi ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun kayan aiki, ƙirar kayan ɗaki, tsarin mannewa, kayan laminating, haɓaka zurfin, buƙatun aikin ƙasa, da kasuwar manufa. Teburin da ke ƙasa yana taƙaita manyan zaɓuɓɓukan da za a iya tattaunawa da Wallis.
| Ƙayyadaddun Abun | da Yake Samun Zaɓuɓɓuka | Tunanin Mai siye |
|---|---|---|
| Kayan abu | PVC fim ɗin ado wanda aka tsara don kayan ɗaki da sarrafa saman ciki | Tabbatar da aikace-aikacen cikin gida, hanyar sarrafawa, da aikin da ake buƙata |
| Itace Hatsi Design | Itacen itacen oak, gyada, maple, teak, ash, pine, itacen toka, itacen fari, da ƙirar al'ada | Bayar da samfurin zahiri, nunin launi, ko salon kasuwa-maƙasudi |
| Ƙarshen Sama | Matte, mai sheki, super-matte, santsi, ƙwanƙwasa, rubutu, ko ƙayyadadden gamawa | Zaɓi bisa ga bayyanar, taɓawa, tsaftacewa, da buƙatun amfani na ƙarshe |
| Embossing | Ƙofar itace mai kyau, hatsi mai zurfi, hatsi na layi, nau'in halitta, ko ƙirar al'ada | Tabbatar da zurfin rubutu da daidaitawar gani yayin amincewar samfurin |
| Kauri | Musamman bisa ga lamination, latsa membrane, ko tsarin nannade | Bayanan martaba masu zurfi suna buƙatar ma'auni a hankali tsakanin sassauƙa da ɗaukar hoto |
| Mirgine Nisa da Tsawon | Musamman don dacewa da girman panel, faɗin kayan aiki, ingancin samarwa, da buƙatun marufi | Samar da faɗin kayan aiki mai amfani da iyakoki da aka fi so |
| Hanyar sarrafawa | Lamination na lebur, lamination mai zafi, lamination mai sanyi, latsawa mara motsi, da nannade bayanan martaba | Ya kamata a tabbatar da tsarin fim a kan ainihin layin samarwa |
| Substrates | MDF, allo, plywood, plywood, PVC allo, allo na ado, bangarori na itace, da bayanan martaba masu dacewa | Dole ne saman ƙasa ya zama mai tsabta, lebur, bushe, kuma ya dace da tsarin mannewa |
| Daidaita Launi | Magana-samfurin daidaitawa da haɓaka kayan ado na musamman | Amince da ma'aunin samarwa a ƙarƙashin yarjejeniyar haske da aka yarda |
| Marufi | Fakitin nadi na kariya don ajiya, sarrafawa, da jigilar kayayyaki na fitarwa | Tabbatar da nauyin juyi, buƙatun pallet, lakabi, da hanyar jigilar kaya |
Tattauna Abubuwan da ake buƙata na ku
| Hanyar Gudanarwa | Na Musamman Zaɓin | Mayar da hankali na Aikace-aikace |
|---|---|---|
| Flat Lamination | MDF bangarori, allon barbashi, plywood, shelves, bangarorin gefe, teburi, da bangon bango | Lalaci, kwanciyar hankali na haɗin kai, daidaiton launi, da amfani da faɗin nadi |
| Vacuum Membrane Pressing | Ƙofofin majalisar da aka siffa, kofofi na MDF, gaban tufafi, da kayan daki masu lanƙwasa | Ƙarfafawa, ɗaukar hoto, zurfin bayanin martaba, zafin jiki, matsa lamba, da mannewa dacewa |
| Rufe bayanan martaba | Firam ɗin ƙofa, gyare-gyare, siket, bayanin martaba, datsa, da kayan ado | Sassauci, jiyya na goyan baya, lissafin bayanan martaba, manne, da saurin layi |
| Zafi ko Cold Lamination | Allolin kayan marmari, fatunan ciki, kofofi, da fatuna masu haɗaka na ado | Juriya na zafin jiki, kunnawa m, matsa lamba, curing, da shirye-shiryen substrate |
Ya kamata masu siye su samar da aikace-aikacen, nau'in nau'in ƙasa, girman panel, zurfin bayanin martaba, nau'in kayan aiki, tsarin mannewa, zafin aiki, ƙarewar saman, launi da ake buƙata, da adadin tsari da ake tsammanin. Ana ba da shawarar gwada fim ɗin da aka zaɓa akan ainihin layin samarwa kafin tabbatar da odar ƙara.
Fim ɗin hatsin itacen itacen oak yana ba da nau'ikan yanayin yanayin da ya dace da ɗakunan dafa abinci, ɗakunan tufafi, ƙofofin ciki, bangon bango, ɗakunan ajiya, da kayan ɗaki na zamani. Itacen itacen oak na halitta, itacen oak mai dumi, itacen oak mai launin toka, itacen oak mai fari, da tasirin itacen oak na iya tallafawa zaɓin ƙirar yanki daban-daban.
Tsarin gyada yana haifar da duhu kuma mafi kyawun tasirin gani don kayan aikin zartarwa, cikin otal, teburan ofis, manyan riguna, kofofin majalisar, da tsarin bango na ado.
Tasirin Maple da toka suna ba da haske, mafi tsaftar bayyanar ga kayan daki irin na Scandinavian, kayan yara, kayan ciki na ofis, kayan sayar da kayayyaki, riguna masu haske, da tarin ƙaramin majalisa.
Teak da sautunan itace na gargajiya sun dace da ƙofofin ciki, kayan daki na gargajiya, bangon bango, ayyukan baƙi, kayan ado na kasuwanci, da kasuwanni waɗanda suka fi son dumi, launukan katako.
Wallis na iya tattauna daidaitaccen launi na al'ada, jagorar hatsi, sikelin ƙira, tasirin bugawa, matakin sheki, zurfin embossing, da haɓaka kayan ado na tushen samfurin. Samfurin ƙwaƙƙwal na zahiri ya fi dacewa lokacin da ake buƙatar madaidaicin launi da rubutu.
Fim ɗin hatsi PVC za a iya sanya shi a kan MDF, allon barbashi, katako, allon PVC , da sauran bangarorin ado masu dacewa. Ana amfani da shi don fale-falen gefen kayan ɗaki, ɗakunan ajiya, teburin tebur, gaban aljihuna, allon kai, kabad ɗin TV, ɗakunan ajiya, da kayan ɗaki na zamani.
PVC Ana amfani da fim ɗin membrane sosai don rufe kofofin majalisa na MDF lebur ko siffa. Yana haifar da ci gaba da kallon itace kuma yana iya nannade bayanan martaba da gefuna lokacin da darajar fim, manne, zafin jiki, da tsari suka daidaita daidai.
Ƙofofin wardrobe, fatunan kabad, ɗakunan ajiya na ciki, gaban aljihuna, da abubuwan da suka dace da kayan ɗaki na iya amfani da haɗakar fina-finai na itace don kiyaye daidaitaccen yaren ƙira a cikin cikakken tarin kayan daki.
Tebura, wuraren aiki, teburan taro, akwatunan fayil, ƙidayar liyafar, kayan gyara, da kayan otal ana iya gamawa da fim ɗin itace PVC don samar da bayyanar ƙwararru da ƙirar ƙasa mai maimaitawa.
Za a iya amfani da fim ɗin kayan ado na itace don ƙofofin ciki, firam ɗin ƙofa, gyare-gyare, bangon bango, ɓangarori, abubuwan rufi, sutura, bayanan martaba na taga, da sauran abubuwan kayan ado na cikin gida.
| Factor Comparison Factor | Wood Grain PVC Fim ɗin Ado Na | Halitta Itacen Dabino |
|---|---|---|
| Daidaitawar Sama | Sarrafa bugu, tsari, launi, da sheki | Bambancin yanayi tsakanin zanen gado da batches na katako |
| Tsare-tsare | Faɗin nau'in itace, launuka, laushi, da ƙarewa | Iyakance ta samuwan nau'ikan katako na halitta da kuma darajar veneer |
| Ingantattun Gudanarwa | Dace da ci gaba da mirgine-to-panel masana'antu samar | Yana iya buƙatar ƙarin zaɓi, haɗawa, yashi, da ƙarewa |
| Abubuwan da aka Siffata | Zaɓaɓɓen maki na iya samuwa sama da bayanan martaba, gefuna, da ƙofofin MDF da aka kore | Siffofin sarƙaƙƙiya na iya buƙatar ƙwararrun matakai na veneering |
| Kulawa | Gabaɗaya mai sauƙin gogewa da kiyayewa | Kulawa ya dogara da sutura da tsarin gama itace |
| Mafi dacewa | Ƙarfafa samar da kayan daki yana buƙatar bayyanar mai maimaitawa | Ayyukan da ke ba da fifiko na ainihin kayan itace na halitta |
Ya kamata mai siye da mai siyarwa su yarda akan launi da aka yarda, jagorar hatsi, sikelin ƙira, matakin kyalkyali, da kuma tasirin embossing. Ya kamata a sake duba samfuran jiki a ƙarƙashin daidaitaccen haske saboda allon fuska da hotunan dijital bazai haifar da ainihin bayyanar ba.
Mahimman wuraren dubawa sun haɗa da tsaftar saman ƙasa, tsaftar bugawa, daidaiton launi, daidaiton ƙima, gefuna na juyi, yanayin iska, faɗin mai amfani, da lahani na bayyane. Ya kamata a yi rikodin ma'aunin binciken da aka amince da shi kafin samarwa.
M, matsa lamba, zafin jiki, samar da lokaci, saurin layi, shirye-shiryen panel, da lissafin bayanan martaba na iya shafar sakamako na ƙarshe. Masu saye yakamata su gwada kayan akan ainihin kayan aikin su kuma su amince da laminated panel kafin sanya babban oda.
Don shirye-shiryen furniture da ke buƙatar maimaita umarni, riƙe ingantaccen samfurin tunani da yin rikodin lambar samfur, ƙarewa, rubutu, ƙayyadaddun nadi, da buƙatun samarwa. Ɗan bambance-bambance na iya faruwa tsakanin batches samarwa, don haka ya kamata a tsara yawan aikin a hankali.
Wallis yana ba da mafitacin fim na kayan ado na itace PVC don masana'antun kayan daki, masana'anta na panel, masu samar da majalisar ministoci, ƴan kwangilar ciki, dillalai, da masu rarraba kayan ado. Our tawagar iya tattauna samfurin selection bisa ga abokin ciniki ta substrate, kayan aiki, zane, surface gama, da kuma oda bukatun.
Fim ɗin hatsi PVC don kayan ɗaki da aikace-aikacen kayan ado na ciki
Itacen itacen oak, gyada, maple, teak, ash, itace mai launin toka, da ƙirar ƙira
Launi na al'ada, hatsi, mai sheki na sama, embossing, faɗi, da zaɓuɓɓukan tsayin mirgine
Goyon baya don lamination lebur, latsa membrane, da ayyukan nannade bayanan martaba
Tattaunawar aikace-aikacen don MDF, plywood, allon barbashi, allon PVC , da bayanan martaba
Ƙimar tushen samfurin kafin samarwa da yawa
Samar da B2B da goyan bayan fakitin-daidaitacce zuwa fitarwa
Faɗa mana ko za a yi amfani da fim ɗin don fale-falen ɗaki na lebur, kofofin majalisar ministoci, ɗakunan tufafi, ƙofofin ciki, bangon bango, bayanan martaba, kayan ofis, ko wani aikace-aikacen kayan ado na cikin gida.
Samar da madaidaicin, nau'in kayan aiki, hanyar laminating ko kafa, tsarin mannewa, nisa mai amfani, zurfin bayanin martaba, zafin aiki, matsa lamba, da saurin layi inda akwai.
Zaɓi itacen oak, goro, maple, teak, ash, ko wasu ƙirar itacen itace, ko aika samfurin ƙima don launi, hatsi, da ƙima.
Yi bita launi, ƙira, ƙyalli, ƙarewa, girma, da marufi. Yi gwajin lamination ko ƙirƙira akan layin samarwa da aka yi niyya kafin amincewa da ƙayyadaddun ƙayyadaddun bayanai.
Tabbatar da samfurin da aka yarda, ƙayyadaddun samfur, adadin tsari, marufi, lakabi, buƙatun bayarwa, da sharuɗɗan kasuwanci kafin samarwa.
Tuntuɓi Wallis don Samfura da Farashi
Ana amfani da shi don ƙirƙirar shimfidar katako na katako a kan kayan daki, ƙofofin majalisa na MDF, ɗakunan tufafi, kayan ofis, ƙofofin ciki, bangon bango, allon kayan ado, gyare-gyare, bayanan martaba, da sauran kayan cikin gida ko abubuwan ciki.
Ee. MDF yana ɗaya daga cikin abubuwan da aka fi sani da fim ɗin kayan ɗaki na PVC . Dole ne a shirya farfajiyar MDF da kyau, tsabta, bushe, santsi, kuma dacewa tare da zaɓin manne da hanyar sarrafawa.
Za'a iya amfani da makin fim ɗin PVC don matsa lamba akan kofofin MDF masu siffa da kayan daki. Madaidaicin kauri, sassauci, m, zazzabi, matsa lamba, lokacin kafawa, da zurfin bayanin martaba dole ne a kimanta su tare.
Ee. Wallis na iya tattauna zaɓuɓɓukan fina-finai don lebur ɗin lebur da nade bayanan martaba. Saboda waɗannan hanyoyin suna da sassauƙa daban-daban, goyan baya, mannewa, da buƙatun girma, masu siye yakamata su gano tsarin da aka yi niyya lokacin neman zance.
Zaɓin kauri ya dogara da hanyar sarrafawa, ƙasa, zurfin bayanin martaba, sassaucin da ake buƙata, ɗaukar hoto, bayyanar saman, da aikin amfani na ƙarshe. Bayar da cikakkun bayanan samar da ku don a iya tattaunawa da gwada ƙayyadaddun ƙayyadaddun da suka dace.
Zaɓuɓɓuka na iya haɗawa da matte, mai sheki, super-matte, santsi, ƙaƙƙarfan ƙyalli, ƙwayar itace mai zurfi, da sauran kayan laushi na musamman. Ya kamata a tabbatar da samuwa don samfurin da aka zaɓa da kuma buƙatun oda.
Wallis na iya kimanta samfuran abokin ciniki don launi, tsari, mai sheki, da madaidaicin rubutu. Madaidaicin ci gaba ya dogara da ingancin samfurin tunani, haƙurin da ake buƙata, yawan samarwa, buƙatun bugu, da ƙaƙƙarfan ƙayatarwa.
Riƙe samfurin zahiri da aka yarda, yi rikodin ainihin ƙayyadaddun samfur, da sadar da cewa tsari aikin maimaitawa ne. Don shigarwar da ke buƙatar daidaita daidaitattun daidaito, yana da kyau a ba da oda adadin aikin da ake buƙata daga rukunin samarwa iri ɗaya da aka tabbatar.
Ana iya amfani da shi don ɗakin dafa abinci na cikin gida da kayan gidan wanka lokacin da fim ɗin ya cika da kyau, an rufe gefuna, kuma an kare panel ɗin da aka gama daga nutsewar ruwa mai tsawo, zafi mai yawa, ƙaddamar da tururi, da kuma tsabtace tsabtaccen tsabta.
Fim ɗin masana'antu laminated PVC gabaɗaya ana yin niyya ne azaman shimfidar wuri na dindindin. Cire shi na iya lalata faifan manne, fim, ko ƙasa, don haka ba a ba da shawarar sake amfani da shi ba.
Rayuwar sabis ta dogara da tsarin fim, shirye-shiryen substrate, m, ingancin sarrafawa, hatimin gefen, yanayi na cikin gida, hasken rana, zafi, danshi, hanyar tsaftacewa, da yawan amfani. Babu tsawon rayuwa ɗaya da ya shafi kowane aikace-aikacen kayan daki.
Tuntuɓi Wallis don tattauna samfurin samuwa. Ya kamata masu siye su gwada kayan da aka zaɓa tare da ainihin kayan aikin su, m, kayan aiki, zazzabi, matsa lamba, da yanayin samarwa kafin tabbatar da odar ƙara.
Da fatan za a samar da aikace-aikacen da aka yi niyya, hanyar sarrafawa, hatsin itace da aka yi niyya ko samfurin tunani, ƙarewar saman, buƙatu mai kauri, faɗin yi, tsayin yi, ƙimanta adadin, buƙatun buƙatun, ƙasar da ake nufi, da kowane gwaji ko takaddun da ake buƙata.
Aika Wallis bayanin hatsin ku na itace, aikace-aikacen kayan ɗaki, bayanan ƙasa, hanyar samarwa, girman da ake buƙata, da ƙimantawa. Ƙungiyarmu za ta tattauna zaɓuɓɓukan fim ɗin ado PVC dacewa don majalisar ku, panel ɗin kayan ɗaki, ƙofar ciki, bangon bango, ko aikin nannade bayanan martaba.
