|
Wallis -Akrilik Shit
Wallis we nem Wallis
| Kɔlɔ: | |
|---|---|
| Sayz: | |
| Matirial: | |
| Kwantiti: | |
Wallis klia kast akrilik shit na transparent PMMA panɛl we dɛn mek frɔm vajin akrilik matirial fɔ aplikeshɔn dɛn we nid ay optik klia, smol sɔfays apinans ɛn fleksibul fabrikeshɔn. I de insay standad 4×8 ft shit fɔmat ɛn bak bɔku big-shit ɛn kɔstɔmayz dimɛnshɔn dɛn, dɛn mek am fɔ sayn manifakta dɛn, displei fabrikatɔ dɛn, akitekchɔral prɔjɛkt dɛn, fɔnicha prodyusɔ dɛn ɛn akrilik distribyushɔn dɛn.
Di kas akrilik manufakchurin prɔses de gi wan prɛmiɔm glas-layk apinans we i de mentɛn di ki prɔsesin advantej dɛn fɔ PMMA . We yu kɔmpia am wit ɔdinari glas, klia akrilik layt, i nɔ kin brok ɛn i izi fɔ kɔt, drɔ, mashin, polish ɛn fɔm fɔ kɔstɔmayt prɔdak dɛn.
Wallis sɔpɔt standad ɛn kɔstɔmayz shit dimɛnshɔn togɛda wit wan wayd tiknes rɛnj, we de mek bayer dɛn ebul fɔ sɔs transparent akrilik fɔ tin displei kɔmpɔnɛnt dɛn, glazing panɛl dɛn, fɔnicha, sayn dɛn ɛn sɛlɛkɛt tik strɔkchɔral ɔ viu aplikeshɔn dɛn.
Di spesifikeshɔn dɛn we de kam biɛn ya de gi wan kwik rɛfrɛns fɔ B2B bayer dɛn we de evalyu Wallis klia kast PMMA shit fɔ sayn, displei, glazing, fɔnicha ɛn kɔstɔmayz fabrikeshɔn.
| di Spɛsifikeshɔn | Ditiɛl dɛn bɔt |
|---|---|
| Tin dɛn | 100% Virgin PMMA Kast Akrilik |
| Tayp fɔ Prodakt | Transparent Klia Kast Akrilik Shit / PMMA Panɛl |
| 4×8 Standart Sayz | Na lɛk 1220 × 2440mm |
| Ɔda Stɛndad Sayz dɛn | 1000 × 2000mm, 1220 × 1830mm, 2050 × 3050mm |
| Kastom Sayz | Available akɔdin to di prɔjek ɛn ɔda rikwaymɛnt dɛn |
| Tiknɛs Rɛnj | Frɔm lɛk 1.8mm; tik kɔstɔm kast akrilik we de te to 800mm sɔbjɛkt to spesifikeshɔn kɔnfɔmeshɔn |
| Kɔlɔ | Transparent / Klia wan |
| Optik Apɛndiks | High transparency wit glas-layk vijual klia |
| Sho | Smɔl, glos transparent sɔfays |
| Fabrikeshɔn fɔ mek tin dɛn | Kכt, Dril, CNC Mashin, Polish, Bεnd εn Sεlekt Tεmכfכm |
| Aplikeshɔn dɛn | Sayn, Displei, Glazing, Patishɔn, Fɛnichɔ, Protɛktiv Panɛl ɛn Kastɔmaiz Fabrikeshɔn |
Klia kas PMMA de gi wan brayt, glas-layk transparent apinans we de mek i fayn fɔ prodak usay visibiliti, prɛzɛnteshɔn ɛn optik apinans impɔtant. Tipik aplikeshɔn dɛn inklud prodak displei, glazing panɛl, protɛktiv kɔva, ɛgzibishin fiks ɛn transparent fɔnicha kɔmpɔnɛnt dɛn.
Akrilik layt pas kɔmɔn glas, we kin mek i izi fɔ ol, transpɔt ɛn instɔleshɔn. Dis na valyu mɔ fɔ big displei panɛl, patishɔn, sayn sistem ɛn fabricated kɔmpɔnɛnt usay ɔl di prɔdak wet impɔtant.
PMMA de gi big resistans to shattering pas ɔdinari glas, we de mek i yusful fɔ bɔku displei, patishɔn, gad, glazing sistɛm ɛn fɔnicha aplikeshɔn usay brok brok risk ɛn sef hanlin na impɔtant tin fɔ tink bɔt.
Dɛn kin prosɛs klia kast akrilik fɔ mek i bi bɔku difrɛn tin dɛn we dɛn dɔn dɔn. Dipen pan tik ɛn prodak dizayn, kɔmɔn we fɔ mek tin dɛn na fɔ kɔt, drɔ, rout, CNC mashin, polish, bɛnd ɛn thermoforming.
Klia PMMA na tin we dɛn kin pik bɔku bɔku wan fɔ aplikeshɔn dɛn we de na de layt ɛn wɛda. Fɔ lɔng tɛm ɔda projɛkt, di wan dɛn we de bay fɔ gi di UV ɛksplɔshɔn we dɛn de op fɔ, di tɛmpracha rɛnj, di we aw dɛn de instɔl am ɛn di savis ɛnvayrɔmɛnt so dat dɛn go kɔnfɔm di rayt shit spɛsifikɛshɔn.
Tin klia sheet dɛn kin yuz fɔ sayn, displei ɛn dɛkɔretiv kɔmpɔnɛnt dɛn, we dɛn kin tink bɔt tik kast akrilik fɔ aplikeshɔn dɛn we nid mɔ rigiditi ɔ bɔku transparent sɛkshɔn dɛn. Di tin dɛn we dɛn nid fɔ du wit rili tik akrilik fɔ ɔltɛm akɔdin to di dimɛnshɔn dɛn we dɛn dɔn dɔn, di lod dɛn ɛn di kɔndishɔn dɛn we dɛn fɔ yuz.
4x8 akrilik shit jεnarali de rifer to wan nominal shit saiz we na lεk 4 fit × 8 fit, we dεn kכmכn rεprεsεnt insay mεtrik saplai as lεk 1220 × 2440mm . Dis fɔmat de yuz bɔku bɔku wan bikɔs i de gi efishɔnal matirial yutilizeshɔn fɔ sayn, displei panɛl, fɔnicha kɔmpɔnɛnt dɛn, patishɔn ɛn jenɛral fabrikeshɔn.
Wallis de gi ɔda standad fɔmat dɛn bak we inklud 1000 × 2000mm, 1220 × 1830mm ɛn 2050 × 3050mm, we de alaw fabricators fɔ pik wan sheet fɔmat we bɛtɛ mach finish-pat dimɛnshɔn ɛn ridyus kɔt west.
Fɔ ripit manufakchurin projɛkt, gi di finish kɔt dimɛnshɔn togɛda wit ɛkspɛkt ɛni ia ɔ ɔda kwantiti. Dis de mek am izi fɔ evaluate if wan standad 4×8 sheet ɔ ɔda sheet fɔmat de gi bɛtɛ matirial yutilizeshɔn.
Ɔl tu di kast ɛn ɛkstruded PMMA kin gi fayn fayn transparent akrilik sɔlvishɔn, bɔt di kayn we dɛn lɛk dipen pan di we aw dɛn mek am, di dimɛnshɔnal rikwaymɛnt dɛn, di prodakshɔn volyum ɛn di aplikeshɔn we dɔn dɔn.
| Konsidereshɔn | Kast Akrilik | Ekstrud Akrilik |
|---|---|---|
| Tipik Pozishɔn | Premium fabrication ɛn kɔstɔmayz PMMA aplikeshɔn dɛn | Kɔntinyu-prɔdakshɔn aplikeshɔn ɛn standad sheet rikwaymɛnt |
| Tiknɛs Rɛnj | Wel suited to a wide renj inkludin tik kɔstɔm akrilik | Tipikli fכkus pan tinna standad tiknes rεnj dεm |
| Mashin we dɛn de yuz | I fayn fɔ kɔt, rout, CNC mashin, drɔ ɛn polish | I fayn fɔ bɔku jenɛral kɔt ɛn fabrikeshɔn prɔses |
| Kastɔm Projɛkt dɛn | Kɔmɔn fɔ pik fɔ kɔstɔm fabrication ɛn tik kɔmpɔnɛnt dɛn | Bɔku tɛm dɛn kin pik am fɔ ay-volyum standad sheet aplikeshɔn dɛn |
Yu kin kɔt klia akrilik sheet dɛn to sayn dɛn, gad dɛn, shelf dɛn, displei kɔmpɔnɛnt dɛn, fɔnicha panɛl dɛn ɛn pat dɛn we dɛn kɔstɔmayt bay we dɛn yuz di rayt akrilik kɔt ikwipmɛnt. Dɛn kin tɔk bɔt di tin dɛn we dɛn nid fɔ kɔt saiz fɔ mek dɛn ebul fɔ ripit prodakshɔn ɛn ɔda tin dɛn we dɛn fɔ du fɔ di prɔjek.
CNC prɔsesin fayn fɔ prɛsishɔn kɔntɔ, ol, slot, grov ɛn ripit kɔmpɔnɛnt dɛn. Kast akrilik na tin we dɛn kin pik fɔ mek displei prodak, sayn, mashin kɔva ɛn kɔstɔmayz asɛmbli we nid klin mashin.
Fɔ prɔjek dɛn we gɛt fɔ du wit laser kɔt ɔ engravin, dɛn fɔ kɔnfyus di tik we dɛn nid, di edj finish ɛn di dip we dɛn engrav bifo dɛn prodyuz. Sampul prɔsesin na rikɔmɛnd fɔ aplikeshɔn usay edj apinɛns na impɔtant kwaliti rikwaymɛnt.
Klia akrilik kin drɔ fɔ mawntin, hadwae ɛn asɛmbli. Dɛn fɔ yuz di rayt tul, di fid rit ɛn di ed distans fɔ ridyus di lokal strɛs rawnd di ol dɛn.
Dɛn kin dɔn di akrilik ed dɛn we dɛn dɔn prosɛs bay we dɛn yuz fayn akrilik polish we dɛn nid fɔ luk klia ɔ we dɛn dɔn rifin fɔ prɛmiɔm displei, fɔnicha ɛn dɛkɔretiv prɔdak dɛn.
Dɛn kin ɔt di tik dɛn we dɛn dɔn pik ɛn mek dɛn bi kɔba ɔ tri-dimɛnshɔnal kɔmpɔnɛnt dɛn. Di wan dɛn we de bay fɔ gi di fɔm rayus, di tik we di shit tik, di pat dimɛnshɔn ɛn di we aw dɛn de mek am so dat dɛn go ebul fɔ ebul fɔ no if i fit.
Dɛn kin yuz klia akrilik bɔku bɔku wan fɔ displei stand, prodak ɔlda, prɔmoshɔnal fiks, sayn kɔva, rital shelf ɛn pɔynt-ɔf-pɔch displei usay ay transparency kin kip atɛnshɔn fɔs pan di prodak.
Transparent PMMA kin tink bɔt fɔ sɛlɛkɛt intɛriɔ glaz, ɔfis patishɔn, dɛkɔretiv skrin, skaylayt kɔmpɔnɛnt ɛn transparent akitekchɔral ɛlimɛnt usay laytwɛt kɔnstrɔkshɔn ɛn optik klariti nid fɔ de.
Klia akrilik de gi yu visibiliti we yu de mek fizik separeshɔn, we de mek i yusful fɔ sɛlɛkɛt protɛktiv skrin, ikwipmɛnt kɔva, gad ɛn transparent ɛnklɔz kɔmpɔnɛnt dɛn.
Kast akrilik kin mek insay shelf, transparent fɔnicha ditel, tebul protɛkta, stɔrɔj prodak, foto freym, dɛkɔretiv kɔmpɔnɛnt ɛn kɔstɔm intɛriɔ prodak.
Ay transparency de mek klia akrilik fayn fɔ displei bɔks, protɛktiv kɔva, ɛgzibit kes, pedestal ɛn viewing panɛl usay di matirial fɔ visually intafer as smɔl as i pɔsibul wit displei tin dɛn.
Tik kast akrilik kin tink bɔt fɔ spɛshal transparent strɔkchɔ dɛn lɛk akwariɔm ɔ swimin-pul fɔ si aplikeshɔn dɛn. Dɛn prɔjek ya nid fɔ mek injinɛri rivyu di dimɛnshɔn, tik, lod, sɔpɔt kɔndishɔn ɛn sef tin dɛn pas fɔ pik tik bay we dɛn jɔs de luk.
Mobayl Ɔlda
Bɔks we dɛn kin kip tin dɛn na pen
Sho
Akrilik Stand Displei
Akrilik Fɔto Frɛm
Akrilik Swimin Pul
Start bay we yu no if dɛn go yuz di sheet fɔ sayn, fɔ mek displei, fɔ mek glaz, fɔ mek fɔnicha, fɔ protɛkt panɛl, fɔ kɔva mashin ɔ fɔ mek spɛshal tik transparent strɔkchɔ. Difrɛn aplikeshɔn dɛn de put difrɛn rikwaymɛnt dɛn pan tik, dimɛnshɔn ɛn prɔsesin.
Tiknes de afɛkt rigiditi, wet, fabrication method ɛn strɔkchɔral pefɔmɛns. Tin panɛl dɛn kin fayn fɔ displei ɔ yuz fɔ dɛkɔret, we big panɛl dɛn we nɔ gɛt sɔpɔt ɛn strɔkchɔral aplikeshɔn dɛn jɔs nid fɔ mek dɛn ebul fɔ evaluate di tik we dɛn gɛt mɔ ditayla.
1220 × 2440mm 4×8 sheet na kɔmɔn fabrication fɔmat, bɔt big 2050 × 3050mm sheet ɔ kɔstɔmayz dimɛnshɔn kin gi bɛtɛ matirial yutilizeshɔn fɔ sɔm prɔjek dɛn.
Gi ditel bɔt fɔ kɔt, CNC routin, laser prɔsesin, drɔlin, polish, bond, bɛnd ɔ thermoforming. Ɔndastand di dawtstrim prɔsesin de ɛp fɔ mek shɔ se di akrilik spɛsifikɛshɔn we dɛn dɔn pik fit fɔ prodakshɔn.
If dɛn go instɔl di akrilik na do, gi di san layt we yu de op fɔ, di wɛda we yu go si, di tɛmpracha kɔndishɔn ɛn di savis layf we yu nid. Dis de alaw fɔ rivyu di aprɔpriet matirial spɛsifikɛshɔn bifo dɛn prodyuz.
Fɔ prɔjek usay transparency, surface appearance, machining quality ɔ ed polish impɔtant, sampul ɛvalueshɔn ɔ trayal fabrication kin ɛp fɔ verify di matirial bifo volyum bay.
| Ficha | Klia Kast Akrilik | Ɔdinari Glas |
|---|---|---|
| Fɔ du tin klia wan | Ay, glas-layk vijual klia | High transparency dipen pan di kayn glas |
| We | I layt ɛn i izi fɔ ol | Hevi fɔ ikwal panɛl dimɛnshɔn dɛn |
| Shatter Biɛvhɔ | I kin mek i nɔ brok pas ɔdinari glas | I kin brok insay fragmɛnt dɛn dipen pan di kayn glas |
| Fabrikeshɔn fɔ mek tin dɛn | Yu kin kɔt, drɔ, CNC mashin, polish ɛn fɔm | I nid fɔ gɛt glas-spɛsifi k prɔsesin ikwipmɛnt |
| Kastɔm Shep dɛn | High fabrication fleksibiliti fɔ mek tin dɛn | Dipen pan glas tayp ɛn spɛshal prɔsesin |
Wallis de saplae akrilik shit matirial fɔ B2B kɔstɔma dɛn we nid standad PMMA panɛl, kɔstɔmayz dimɛnshɔn ɛn spɛshal tiknɛs rikwaymɛnt. Klia kast akrilik kin bi selekt fɔ projɛkt usay optik apinans, fabrikeshɔn fleksibiliti ɛn rili sheet saplai impɔtant.
Virgin PMMA Material: Klia kast akrilik we dɛn mek wit vajin PMMA matirial.
4×8 Standart Fɔmat: 1220 × 2440mm shit fɔ kɔmɔn fabrikeshɔn rikwaymɛnt dɛn.
Bɔku Shit Sayz dɛn: 1000 × 2000mm, 1220 × 1830mm, 1220 × 2440mm ɛn 2050 × 3050mm.
Waid Tiknɛs Kapabiliti: Tin sheet dɛn tru kɔstɔmayz tik kas akrilik akɔdin to di prɔjek rikwaymɛnt dɛn.
Fabrikeshɔn Fleksibiliti: Suitabl opshɔn fɔ kɔt, CNC mashin, drɔ, polish, bɛnd ɛn fɔm.
B2B Kastamayzeshɔn: Kastɔmayz shit dimɛnshɔn ɛn spɛsifikɛshɔn fɔ OEM ɛn prɔjek ɔda dɛn.
Projek Sɔpɔt: Bayer dɛn kin sɛn drɔin, dimɛnshɔn, prɔsesin rikwaymɛnt ɛn aplikeshɔn kɔndishɔn fɔ spɛsifikɛshɔn rivyu.
Transparent akrilik surfaces nid protɛkshɔn we dɛn de handle, fabrication ɛn intanashɔnal transpɔt. Di pak fɔ ridyus di surface skratch, kɔna damej ɛn muvmɛnt bitwin sheet dɛn we dɛn de ship.
Fɔ bɔku ɔda, gi di sheet dimɛnshɔn, tik, kwantiti ɛn di ples we yu de go we yu de aks fɔ kot so dat dɛn go ebul fɔ evalyu di rayt protɛktiv fim, palet ɛn kɔntena-shiping arenjmɛnt.
Wallis de wok wit intanashɔnal bayer dɛn we de sɔs akrilik matirial fɔ sayn, displei, fɔnicha, akitɔk panɛl ɛn kɔstɔmayz fabrikeshɔn. Fɔ gi kɔmplit tɛknikal ɛn bay infɔmeshɔn na di inkwyuiz stej de ɛp fɔ mek di kot kɔrɛkt ɛn fɔ pik di tin dɛn we dɛn de yuz fɔ du di wok fayn fayn wan.
Di Kɔmni Ɛvride Ɔpreshɔn
Di kɔmyunikeshɔn wit di kɔstɔma dɛn de ɛp Wallis fɔ ɔndastand di tin dɛn we dɛn nid we gɛt fɔ du wit transparency, tik, shit dimɛnshɔn, fabrication, pak ɛn fayn aplikeshɔn. Ditayl projɛkt infɔmeshɔn impɔtant mɔ fɔ tik akrilik ɛn kɔstɔmayz PMMA kɔmpɔnɛnt dɛn.
Wan klia kast akrilik shit na wan transparent PMMA panɛl we dɛn prodyuz yuz wan kastin prɔses. I de gi ay vijual klia togɛda wit gud mashin ɛn fabrikeshɔn fleksibiliti fɔ sayn, displei, glazing, fɔnicha ɛn kɔstɔmayz akrilik prodak.
Wan nominal 4×8 ft akrilik shit na kɔmɔn fɔ saplae na lɛk 1220 × 2440mm. Wallis de gi ɔda standad ɛn kɔstɔmayt dimɛnshɔn dɛn bak fɔ difrɛn prodakshɔn rikwaymɛnt dɛn.
Di Wallis prodakt renj stat na aprɔksimatli 1.8mm ɛn inklud kɔstɔmayz tik akrilik opshɔn dɛn. Di tin dɛn we dɛn nid fɔ du we rili tik, inklud di spɛsifikɛshɔn dɛn we de kam nia 800mm, fɔ kɔnfyus akɔdin to di sheet dimɛnshɔn, aplikeshɔn, kwantiti ɛn prodakshɔn fisibiliti.
Klia kast akrilik de gi ay glas-layk transparency ɛn dɛn kin yuz am bɔku bɔku wan we di vijual klia impɔtant. Eksakt optik transmishɔn kin difrɛn wit di matirial gred ɛn tiknɛs, so prɔjek dɛn we nid wan spɛshal optik valyu fɔ kɔnfɔm di rilevɛns tɛst spɛsifikɛshɔn.
Dɛn tu na PMMA matirial bɔt dɛn de prodyuz dɛn yuz difrɛn manufakchurin prɔses. Kast akrilik na kɔmɔn we dɛn kin pik fɔ prɛmiɔm fabrikeshɔn, mashin ɛn wayda tiknɛs rikwaymɛnt, we dɛn kin yuz ɛkstruded akrilik fɔ standad kɔntinyu-prɔdakshɔn shit aplikeshɔn dɛn.
Klia kast akrilik kin evalyu fɔ laser kɔt ɛn engraving. Tiknes, laser setin ɛn rikwayd edj apinans inflɔws di fayn rizɔlt, so sampul prɔsesin na rikɔmɛnd fɔ ay-prɛsishɔn ɔ apinans-kritikal prodak dɛm.
Yɛs. Kas akrilik fayn fɔ CNC routin ɛn mashin we dɛn yuz di rayt akrilik tul ɛn prɔsesin paramita. I kin mashin insay kɔnto, opin, grov ɛn kɔstɔmayt kɔmpɔnɛnt dɛn.
Yɛs. Klia akrilik kin drɔ fɔ mawnt ɛn asɛmbli. Kɔrɛkt drɔl jɔyometri, fid rit ɛn adekwayt distans frɔm di shit ed dɛn de ɛp fɔ ridyus di risk fɔ krak rawnd di ol dɛn we dɛn dɔn drɔ.
Dɛn kin ɔt ɛn fɔm di tik dɛn we dɛn dɔn pik we dɛn kɔl kas akrilik. Di aprɔpriet prɔsesin kɔndishɔn dɛn dipen pan tik, fɔm rayus, jɔyometri ɛn di sɔfa kwaliti we dɛn want.
Klia PMMA na tin we dɛn kin yuz na ɔda prɔdak, bɔt fɔ wok fɔ lɔng tɛm dipen pan di patikyula akrilik gred, di kɔndishɔn we dɛn kin ɛksplɔz ɛn di instɔleshɔn. Fɔ di prɔjek dɛn we de na do, gi di san layt we yu de op fɔ, di wɛda ɛn di savis-layf we yu nid bifo yu ɔda.
yכlכ rεsistεns dipכnt pan di PMMA fכmyuleshכn, mεtirial kwaliti εn UV εkspכzכn kכndishכn dεm. If lɔng tɛm ɔda optik klia na impɔtant tin, di wɛda pefɔmɛns we dɛn nid fɔ spɛsifa ɛn kɔnfɔm bifo dɛn prodyuz.
Bɔku tɛm, akrilik kin mek i nɔ brok pas ɔdinari glas ɛn i kin layt fɔ handel. Bɔt, di fit fɔ strɔkchɔral ɔ sefty-kritikal glazing dipen pan panɛl dimɛnshɔn, tik, lod, mawntin kɔndishɔn ɛn aplikebul prɔjek rikwaymɛnt.
Tik kast akrilik kin yuz insay spɛshal akwatik viuin aplikeshɔn, bɔt tiknɛs sɛlɛkshɔn nid injinɛri kɔlkyulɛshɔn bays pan wata prɛshɔn, panɛl dimɛnshɔn, sɔpɔt dizayn ɛn sef faktɔs. Dɛn aplikeshɔn ya nɔ fɔ spɛsifa yuz wan jenɛrik tiknes chɔt nɔmɔ.
Yuz klin saf saf maykrofayba klos wit wata ɔ wan aprɔpriet mild akrilik-kɔmpatibl klin. Nɔ yuz abrasive pad, shap tul ɛn agresiv sɔlvɛnt we kin skrach ɔ haz di transparent surface.
Sɔm layt surface skrat dɛn kin ridyus bay we yu yuz fayn akrilik polish tɛknik dɛn. Dip skrat ɔ optik-kwaliti sɔfays kin nid fɔ mek pɔsin rifinish am fayn fayn wan, so di rayt we fɔ du am dipen pan di skrach dip ɛn di tin dɛn we dɛn nid fɔ mek i luk fayn.
Yɛs. Apat frɔm standad shit fɔmat, dɛn kin tɔk bɔt di dimɛnshɔn dɛn we dɛn kɔstɔmayt akɔdin to tik, aplikeshɔn, ɔda kwantiti ɛn di tin dɛn we dɛn nid fɔ mek.
Fɔ projɛkt usay optik klia, mashin, polish ɔ fabrikeshɔn kwaliti impɔtant, dɛn kin rɛkɔmɛnd fɔ ɛvaluet sampul bifo big-volyum prodakshɔn. Kɔntakt Wallis wit yu tik, saiz ɛn aplikeshɔn rikwaymɛnt fɔ tɔk bɔt di rayt sampul opshɔn dɛn.
Duya gi di tik we yu nid, ful-shit ɔ finish dimɛnshɔn, kwantiti, fayn aplikeshɔn, indo ɔ ɔda savis kɔndishɔn, prɔsesin rikwaymɛnt ɛn di delivri dɛstineshɔn. Drawing dɛn kin rili yusful fɔ kɔstɔm-kɔt ɔ tik akrilik prɔjɛkt dɛn.
If yu nid standad 4×8 klia akrilik shit fɔ sayn ɛn displei, big transparent PMMA panɛl fɔ mek ɔ kɔstɔmayz tik kast akrilik fɔ spɛshal prɔjek, Wallis de gi bɔku shit saiz ɛn tik opshɔn fɔ B2B bay.
Send wi yu rikwayd tik, dimɛnshɔn, kwantiti, fabrication prɔses ɛn fayn aplikeshɔn. Wi tim kin rivyu wetin yu nid ɛn ɛp fɔ no wan fayn klia kast akrilik spɛsifikɛshɔn fɔ yu prɔjek.
