Views: 0 Author: Sayt Ɛditɔ Pɔblish Taym: 2026-09-28 Ɔrijin: Ples
Mat kad lamineshɔn stɛl plet na prɛsishɔn prɛs plet dɛn we dɛn kin yuz di tɛm we dɛn de hot lamineshɔn fɔ PVC , PETG , polikabɔnɛt ( PC ), ABS ɛn ɔda plastic-kad matirial dɛn. Di plet surface de ɛp fɔ no di las apinɛns fɔ di laminated kad, inklud mat, sɛmi-mat, glossy, silk ɔ tɛkstɔr ifɛkt dɛn.
Fɔ di wan dɛn we de bay we de sav di Rɔshian plastic-kad makit, di saplay land skay inklud Rɔshian distribyushɔn, intanashɔnal lamination-plet manifakta ɛn kad-prɔdakshɔn kɔmni dɛn we de sho lokal dimand fɔ dɛn matirial ya. Fɔ mek di kɔmpiashɔn kɔrɛkt, dis atikul separet dairekt ɔ rilevɛns lamination-plet spɔlayt dɛn frɔm Rɔshian kad manifakta ɛn ikwipmɛnt kɔmni dɛn we ripresent daunstrim makit dimand.
Kɔmni |
Di Rol we di Maket De Du |
Rilevɛns Prodakt / Kapabiliti |
|---|---|---|
WALLIS |
Intanɛshɔnal manifakta / ɛkspɔta |
Mat, glos ɛn patɛn laminɛshɔn stɛl plet dɛn; lamineshɔn pad dɛn |
Verilion / Kadɛl na di kɔmni |
Rɔshian kad-matirial spɔlayt |
Stainlɛs-stiɛl laminɛshɔn plet dɛn, tɛkstɔr plet dɛn |
Komplekt Liga we gɛt di taytul |
Rɔshian spɔlayt |
Glossy, mat ɛn tɛkstɔr mɛtal lamineshɔn plet dɛn |
US PLAST |
Rɔshian kad-prɔdakshɔn spɔlayt |
Miro, mat ɛn tɛkstɔr prɛs-laminɛshɔn plet dɛn |
KAD-PROM |
Rɔshian spɔlayt |
Mat ɛn miro mɛtal plet, tɛmal pad ɛn kad matirial |
4Plɛt we yu de yuz |
Intanɛshɔnal spɛshal pɔsin |
Standart ɛn ay-sikyɔriti lamineshɔn plet dɛn |
Schwan-Laminɛshɔn we dɛn kɔl |
Intanɛshɔnal manifakta |
Stenlɛs-stiɛl, aluminiɔm ɛn hardened lamineshɔn plet dɛn |
RSID Sɔlwɛshɔn dɛn |
Lamineshɔn-plet spɔlayt |
Matt / semi-mat plet, kɔstɔm dimɛnshɔn ɛn rɔf |
NCS / NPO Nioprint, we de na di wɔl |
Rɔshian kɔmni we de mek kad |
Daunstrim yuza fɔ industrial kad-laminɛshɔn sistem dɛn |
AKArd, we de na di wɔl |
Rɔshian kɔmni we de mek kad |
Rifrɛns fɔ hot-prɛs kad laminɛshɔn ɛn sɔfays finish |
Poligraf Zashchita we de na di wɔl |
Rɔshian kɔmni we de mek kad |
Ha-volyum plastic-kad prodakshɔn |
Orenkart bin de du am |
Rɔshian kɔmni we de mek kad |
Established downstream kad-prɔdakshɔn makɛt |
Kad Teknɔlɔji |
Rɔshian kɔmni we de mek kad |
Plastik kad dɛn we gɛt bɔku opshɔn dɛn fɔ dɔn sɔfays |
Ostcard we dɛn kɔl Ostcard |
Rɔshian industrial kad manifakta |
Indastrial lamineshɔn-sistim yuza |
San-San |
Rɔshian ikwipmɛnt spɔlayt |
Kad-lamination ikwipmɛnt we de yuz mɛtal plet dɛn |
Mat kad lamination stɛl plet na prɛsishɔn mɛtal plet dɛn we dɛn kin yuz na prɛs-laminɛshɔn ikwipmɛnt we dɛn de mek plastic-kad. Dɛn kin put wan stak we dɛn dɔn pripia fɔ kad matirial bitwin lamineshɔn plet dɛn ɛn prosɛs am ɔnda kɔntrol ɔt ɛn prɛshɔn. Dipen pan di kad kɔnstrɔkshɔn, kɔmpatibl matirial dɛn kin inklud PVC , PETG , polycarbonate ( PC ), ABS ɛn rilat kad sabstret dɛn.
Bikɔs di plet de kɔntakt di ɔda kad sɔfays we dɛn de laminate, in finish de afɛkt di vishɔnal ɛn taktil rizɔlt. Difrɛn lamination plet dɛn kin yuz fɔ mek:
Mat kad surfaces
Sɛmi-mat sɔfays dɛn
Sɔfays dɛn we gɛt ay glos
Silk dɔn dɔn
Tekstɔr sɔfays dɛn
Di kɔstɔm patɛns dɛn
Dis de mek di lamineshɔn plet bi impɔtant prɔses kɔmpɔnɛnt pas fɔ bi simpul sɛparatɔ. Plɛt matirial, surface roughness, flatness, tiknes, finish kɔnsistɛns ɛn resistans to ripit ɔt saykl ɔl kin afɛkt prodakshɔn pefɔmɛns ɛn di fayn kad apinans.
Di wan dɛn we de bay fɔ kɔnfɔm di plet matirial ɛn if in hadnɛs ɛn di tritmɛnt we dɛn de trit am na di say we i de, fayn fɔ ripit ɔt, prɛs ɛn klin saykl dɛn. Dɛn kin pik stenlɛs stiɛl ɛn ɔda plet matirial dɛn we dɛn dɔn injinia akɔdin to di lamination prɔses ɛn di savis layf we dɛn nid.
Mat ɛn sɛmi-mat plet dɛn nid fɔ kɔntrol sɔfays rɔf so dat di kad sɔfays we dɔn dɔn go ripit frɔm wan batch to batch. Di wan dɛn we de bay fɔ aks fɔ wan agrimɛnt sɔfayz sampul ɔ roughness spɛsifikɛshɔn pas fɔ abop pan diskripshɔn dɛn nɔmɔ lɛk 'matte' ɔ 'fine matte.'
Plɛt tiknɛs fɔ mach di lamination prɛs kɔnfigyushɔn ɛn prodakshɔn stak. Di sɔs matirial fɔ dis atikul inklud ɛgzampul dɛn fɔ 0.6 mm, 0.8 mm ɛn 1.0 mm plet dɛn frɔm sɔm spɔlayt dɛn. Flatnes ɛn dimɛnshɔnal kɔnsistɛns na ikwal impɔtant fɔ yunifom prɛshɔn distribyushɔn.
Standart A4-fɔmat plet dɛn kin kɔmɔn na smɔl kad-laminɛshɔn sistem dɛn, we di industrial layn dɛn kin nid fɔ gɛt kɔstɔmayz dimɛnshɔn, kɔna profayl, edj finish ɔ sɔfa patɛn. Di wan dɛn we de bay fɔ sɛn di prɛs mɔdel, di dimɛnshɔn dɛn we dɛn nid ɛn di kad fɔmat we dɛn de aks fɔ kot.
Di lamineshɔn plet fɔ evalyu togɛda wit di kɔmplit kad strɔkchɔ, inklud PVC , PETG , PC , ABS , Overlay film , print layers ɛn ɛni RFID ɔ smart-kad kɔmpɔnɛnt. Faynal sɛtin fɔ tɛmpracha, prɛshɔn ɛn saykl tɛm fɔ validet pan di pɔsin we bay in yon ikwipmɛnt.
Di fɔs et kɔmni dɛn we de dɔŋ ya na di wan dɛn we rili impɔtant to pipul dɛn we de bay we de luk fɔ kad lamineshɔn stɛl plet, kad-prɔdakshɔn kɔnsumabl ɔ spɛshal lamineshɔn-plet manufakchurin. Dɛn ɛksaktɔl kɔrɛnt prɔdak rɛnj ɛn sɛl avaylabl fɔ kɔnfɔm dairekt bifo dɛn bay.
WALLIS de mek ɛn ɛkspɔt kad matirial ɛn lamineshɔn kɔnsumabl, inklud stɛl plet dɛn we dɛn kin yuz fɔ mek plastic-kad. I rεnj inklud mat, ay-glos εn kכstכmayz patεn laminεshכn plet, tכgeda wit silikon εn wul laminεshכn pad.
Prodakt dɛn we gɛt fɔ du wit dis: mat lamination stɛl plet, ay-glos stɛl plet, patɛn ɔ tɛkstɔr stɛl plet, silikon lamineshɔn pad, wul lamineshɔn pad, ɛn kɔstɔmayz saiz ɔ finish.
Fɔ Rɔshian kad manifakta ɛn kad-matirial distribyushɔn, WALLIS rili impɔtant as intanashɔnal faktri saplay fɔ ɔlsay, OEM ɛn kɔstɔmayz ɔda. Di wan dɛn we de bay fɔ kɔnfɔm di dimɛnshɔn dɛn we dɛn nid fɔ di plet, di tik we dɛn nid, di say we dɛn dɔn dɔn di sɔfays ɛn di ikwipmɛnt fɔ lamination bifo dɛn ɔda.
Verilion na in dɛn aydentify insay di sɔs matirial as wan Rɔshian spɔlayt fɔ kad-prɔdakshɔn matirial ɛn lamination prodak. I Cardel layn inklud lamination plet fɔ plastic, banking, smart, kɔntaktlɛs ɛn kɔmbayn kad.
Di sos matirial notis stenlɛs-stiɛl laminɛshɔn plet dɛn insay 0.8 mm ɛn 1.0 mm tiknɛs, togɛda wit kɔntrol sɔfays rɔfnɛs ɛn kɔstɔm tɛkstɔr opshɔn dɛn. Dɛn spɛsifikɛshɔn ya de mek Verilion / Cardel rili impɔtant to bayer dɛn we nid dɔkyumɛnt plet dimɛnshɔn ɛn sɔfayz kwaliti dɛn.
Komplekt Liga na wan Rɔshian saplay we de sav di plastic-kad prodakshɔn industri. I katalog inklud mɛtal laminɛshɔn plet dɛn we gɛt glos, mat ɛn tɛkstɔr vɛshɔn dɛn.
Di sɔs matirial list A4 plet dɛn we gɛt 0.6 mm ɛn 0.8 mm tik ɛn tɛkstɔr vɛshɔn dɛn we gɛt 0.8 mm ɛn 1.0 mm tik. Dis mek di kɔmni yusful fɔ bayer dɛn we de kɔmpia lokal Rɔshian sapɔt, bɔku bɔku sɔfays finish ɛn standad kad-prɔdakshɔn fɔmat dɛn.
US PLAST de saplae konsumabl ɛn ikwipmɛnt fɔ mek plastic-kad na Rɔshia. I rεnj inklud stεl laminεshכn plet, tεmכl pad, magnεtik-strip mεtirial, Overlay film s εn כda prodakshכn kכnsumabl.
Dɛn diskrayb in lamineshɔn-plet ɔfrin as inklud miro, mat ɛn tɛkstɔr plet fɔ prɛs laminatɔ, we mek am wan rilevɛns lokal sɔs fɔ kɔmni dɛn we de bay wan brayt sɛt fɔ kad-prɔdakshɔn matirial dɛn.
Dɛn no se CARD-PROM na wan Rɔshian kɔmni we de gi plastic-kad matirial ɛn ikwipmɛnt. I katalog inklud mat mɛtal plet fɔ A4 prɛs laminatɔ ɛn bak miro-finish plet ɛn tɛmal-distribushɔn matirial.
Rilat sɔs kategori: mat mɛtal plet, miro mɛtal plet, kad laminat, tɛmal pad, plastic-kad shit ɛn prɛs-laminɛshɔn kɔnsumabl.
4Plate na TRUSTECH de diskraib am as intanashɔnal spɛshal pɔsin we de du standad ɛn ay-sikyɔriti lamineshɔn plet fɔ plastic kad ɛn gɔvmɛnt dɔkyumɛnt dɛn.
I pozishɔn rili impɔtant to di wan dɛn we de mek plastic kad, smat kad, aydentiti prodak ɛn sikyɔriti dɔkyumɛnt dɛn we nid kɔntrol laminɛshɔn sɔfays.
Schwan-Lamination na intanashɔnal manifakta we spɛshal pan industrial lamination plet dɛn. Di sɔs matirial de aydentify stenlɛs-stiɛl, aluminiɔm ɛn hardened-stiɛl plet opshɔn dɛn togɛda wit kɔstɔmayz shep ɛn saiz dɛn.
Di kɔntrol sɔfays rɔf ɛn braytnɛs impɔtant we dɛn nid fɔ ripit kad-sɔfa riprodakshɔn. Di opshɔn dɛn we dɛn kin pik fɔ plet we dɔn at kin rili impɔtant bak usay skrach rɛsistɛns ɛn lɔng savis layf na prɔyorities.
RSID Solutions de saplae lamination plet fɔ plastic-kad prodakshɔn. I rεnj inklud mat εn sεmi-mat plet wit kכstכmayz dimεnshכn εn kכntroled surface roughness.
Di sɔs matirial list 0.6 mm, 0.8 mm ɛn 1.0 mm tik ɛn kɔmpatibiliti wit PVC , PC , ABS ɛn PETG . Raun edj ɛn ay-tɛmpracha rɛsistɛns de bak pan list bitwin rilevɛns spɛsifikɛshɔn dɛn.
Di sɛvin kɔmni dɛn we de kam biɛn ya nɔ fɔ ɔtomɛtik wan dɛn we de mek mat stɛl-plet. Dɛn put dɛn insay bikɔs dɛn ripresent di dawtstrim plastic-kad prodakshɔn, lamination-ikwipmɛnt ɛn kɔnsumabl makɛt na Rɔshia. Dis difrɛns de mek di spɔlayt akkuracy bɛtɛ ɛn ɛp di wan dɛn we de bay fɔ ɔndastand usay dɛn rili de yuz lamination plet.
NCS / NPO Neoprint na wan we dɛn dɔn no insay di sɔs matirial as wan Rɔshian plastic-kad manifakta we de na Sɛnt Pitasbɔg. I prodakshɔn prɔses inklud printin, lamination ɛn panch.
NCS rili impɔtant to dis atikul as daunstrim industrial yuza pas as kɔnfyus stɛl-plet manifakta. I prodakshɔn aktiviti de sho di tɛknikal rikwaymɛnt fɔ laminated-kad manufakchurin na di Rɔshian makit.
AKard na di sɔs matirial fɔ in diskripshɔn fɔ laminated-card prodakshɔn, usay dɛn de pres plastic sheet ɛn lamination film bitwin mɛtal plet dɛn ɔnda kɔntrol ɔt ɛn prɛshɔn. Yu kin yuz difrɛn plet sɔfays fɔ gɛt mat ɔ glos kad finish.
Fɔ lamination-plet spɔlayt dɛn, kɔmni dɛn lɛk AKArd de ripresent di dawɔnstrim kɔstɔma sɛgmɛnt we de evalyu plet pefɔmɛns togɛda wit tɛmpracha, prɛshɔn ɛn prɛs tɛm.
Poligraf Zashchita na wan Rɔshian kɔmni we de mek kad. Di sɔs matirial se i de mek bɔku kayn plastic kad dɛn, inklud prɔdak dɛn we gɛt mat, glos ɛn transparent finish.
I rilevans to lamination-plet spɔlayt dɛn kɔmɔt frɔm ay-volyum kad prodakshɔn we nid fɔ ripit sɔfays kwaliti ɛn dipendabl prɔses kɔnsumabl.
Orenkart na wan Rɔshian kad manifakta wit wan establish prezɛns insay plastic-kad prodakshɔn. Di sɔs matirial de diskraib wan kɔmplit prodakshɔn saykl ɛn wan rɛnj we inklud plastic ɛn mɛtal kad dɛn.
Fɔ plet ɛn kɔnsumabl spɔlayt dɛn, Orenkart ripresent di established Rɔshian kad-prɔdakshɔn makɛt pas wan kɔnfyus lamination-plet manufakchurin sɔs.
Kad Teknɔlɔji na wan kɔmni we de mek kad na Sɛnt Pitasbɔg. I kad prodakt dɛn de yuz difrɛn lamination ɛn surface-finish opshɔn fɔ aplikeshɔn dɛn lɛk lɔyalti, mɛmbaship ɛn prɔmoshɔnal kad dɛn.
Dis de mek di kɔmni rili impɔtant as daunstrim aplikeshɔn rɛfrɛns fɔ manifakta dɛn we de sɛl lamineshɔn plet ɛn ɔda kad-prɔdakshɔn matirial dɛn.
Ostcard de ɔpres plastic-kad manufakchurin fasiliti dɛn we de yuz industrial lamination sistem. Di sɔs matirial de aydentify Lauffer lamination ikwipmɛnt insay in prodakshɔn infrastukchɔ.
Dat mek Ostcard rili impɔtant as industrial yuza fɔ lamineshɔn plet, lamineshɔn pad, plastic-kad shit, RFID matirial ɛn ɔda prodakshɔn kɔnsumabl.
San-San na wan Rɔshian spɔlayt fɔ plastic-kad prodakshɔn ikwipmɛnt. I Izi Kad lamineshɔn-ikwipmɛnt dɔkyumentri inklud mɛtal plet dɛn as pat pan di A4 prɛs-laminɛshɔn kɔnfigyushɔn.
Pan ɔl we San-San na fɔs wan ikwipmɛnt spɔlayt pas wan dediket lamination-plet manifakta, i rili impɔtant fɔ bayer dɛn we de tink bɔt kɔmplit smɔl-fɔmat kad-laminɛshɔn sistem.
Tin |
Mat Plɛt we dɛn kɔl |
Plɛt we Glɔs Glɔs |
|---|---|---|
Di we aw di wɔl de luk |
Low-glare, subdued apinans |
Brayt, we de sho aw pɔsin de luk |
Finga prɛnt we pɔsin kin si |
Jɛnɛral wan nɔ kin notis so |
Jɛnɛral wan, i kin notis mɔ |
Visual effect |
Sɔft / mɔdan / prɛmiɔm |
Brayt / we dɛn dɔn polish |
Tipik yus |
Premium kad, dak dizayn, ID ɛn mɔdan kad stayl |
Promoshɔnal ɛn ay-glos kad dizayn dɛn |
Surface roughness we di ples kin rɔf |
Kontrold ay roughness |
Rili low roughness / polish surface |
Layt we de sho aw pɔsin de tink |
Mɔ difyuz |
Strɔng riflekshɔn |
Kastɔm tɛkstɔr dɛn |
Yu kin gɛt am frɔm sɔm spɔlayt dɛn |
Yu kin gɛt am frɔm sɔm spɔlayt dɛn |
Di kɔrɛkt chuk dipen pan di kad dizayn, di sɔfa ɛfɛkt we dɛn nid, di kɔlɔ dɛn we dɛn print, di we aw dɛn de mek pɔsin in yon we fɔ go dɔŋ ɛn di we aw di kɔstɔma dɛn de tɔk. Di wan dɛn we de bay fɔ gri fɔ wan fizik sampul ɛn rɔn wan prodakshɔn trayal bifo dɛn standad wan plet finish.
Wan kɔntrol plet sɔfays de ɛp fɔ riprodyuz wan kɔnsistɛns mat apinans akɔs ripit prodakshɔn batch dɛn. Dis impɔtant mɔ we dɛn de mek kad program dɛn fɔ lɔng tɛm ɔ akɔdin to bɔku bɔku lɔt dɛn.
Mat sɔfays dɛn de difyuz layt we de riflɛkt ɛn mek wan soft vijual ifɛkt pas plet dɛn we dɛn dɔn polish bad bad wan. Dis kin fayn fɔ prɛmiɔm kad, aydentifikeshɔn prɔdak ɛn dak-kɔlɔ dizayn.
Mat sɔfays kin mek sɔm finga prɛnt ɛn smɔl smɔl tin dɛn we nɔ pafɛkt we pɔsin de si nɔ notis pas wan say we gɛt glos we de riflɛsɛ bad bad wan. Aktual pefɔmans dipen pan di plet tɛkstɔr, kad matirial ɛn prodakshɔn prɔses.
Dipen pan di spɔlayt spɛsifikɛshɔn ɛn di laminɛshɔn prɔses, dɛn kin yuz mat plet wit PVC , PETG , PC , ABS ɛn rilat kad strɔkchɔ dɛn. Di wan dɛn we de bay fɔ kɔnfɔm kɔmpitibliti wit dɛn ful matirial stak pas fɔ pik wan plet bays pan kad matirial nɔmɔ.
Wan klia RFQ de ɛp di saplay dɛn fɔ rɛkɔmɛnd di kɔrɛkt plet ɛn i de ridyus di tɛm fɔ tek sampul. Di wan dɛn we de bay fɔ gi bɔku pan dɛn tin ya as dɛn ebul:
RFQ Item we yu go yuz |
Infɔmeshɔn fɔ Gi |
|---|---|
Laminɛshɔn prɛs |
Mashin brand / model ɔ plet wok eria |
Plɛt saiz |
Lɛngth × wit |
Tik we i tik |
Rikwayd tik ɔ sampul we dɔn de |
Sho |
Mat, sɛmi-mat, glos, silk ɔ kɔstɔm tɛkstɔr |
Di tin dɛn we dɛn kin yuz fɔ mek kad |
PVC , PETG , PC , ABS ɔ ɔda laminat strɔkchɔ |
Kad aplikeshɔn |
Bank kad, ID kad, RFID kad, loyalti kad, smart kad, ɛn ɔda tin dɛn. |
Surface rɛfrɛns |
Aprɔv sampul, roughness spɛsifikɛshɔn ɔ vijual standad |
Ɔmɔs |
Sample kwantiti ɛn ɛkspɛkt bɔlk ɔda |
Kad lamineshɔn stɛl plet na prɛsishɔn mɛtal plet we dɛn kin put insay hot-prɛs lamineshɔn stak we dɛn de mek plastic-kad. I de ɛp fɔ transfa ɔt ɛn prɛshɔn we in surface finish de inflɔws di las apinɛns fɔ di kad.
Mat plet dɛn gɛt wan kɔntrol tɛkstɔr sɔfays we de prodyuz wan lɔwa-glare finish, we glos plet dɛn gɛt wan bɔku smol polish sɔfays we de mek strɔng riflekshɔn ɛn brayt kad apinɛns.
Di sɔs matirial we dɛn rivyu fɔ dis atikul inklud ɛgzampul dɛn fɔ 0.6 mm, 0.8 mm ɛn 1.0 mm plet dɛn. Di korekt tiknes dipen pan di lamination pres, stak dizain en suplai spesifikeshɔn.
Yɛs. Dipen pan di spɔlayt, kɔstɔmayshɔn kin inklud dimɛnshɔn, tik, sɔfays rɔf, mat lɛvɛl, tɛkstɔr, pɔtn, edj tritmɛnt ɛn ɔda plet kwaliti dɛn.
Dipen pan di prɔses ɛn plet spɛsifikɛshɔn, dɛn kin yuz lamineshɔn plet wit PVC , PETG , PC , ABS ɛn ɔda kad strɔkchɔ dɛn. Kompatibiliti fɔ validet wit di kɔmplit matirial stak ɛn prodakshɔn sɛtin.
Nɔ, na bay wilful di atikul de mek difrɛns bitwin di wan dɛn we de gi plet dairekt ɔ we gɛt fɔ du wit di plet frɔm di wan dɛn we de mek kad ɛn ikwipmɛnt kɔmni dɛn na Rɔshian. Di las wan dɛn de insay bikɔs dɛn de ripresent di dawtstrim makit usay dɛn de yuz lamineshɔn plet ɛn rilat kɔnsumabl dɛn.
Kɔnfɛm di plet dimɛnshɔn, tiknɛs, flatnɛs, matirial, sɔfays rɔfnɛs, edj kɔndishɔn, kɔmpatibiliti wit di laminɛshɔn prɛs, aprɔv sɔfays sampul, pak ɛn ripit-ɔda kɔnsistɛns. I fayn fɔ mek dɛn tray fɔ mek di prodakshɔn bifo dɛn mek big ɔda.
WALLIS de saplae kad-prɔdakshɔn matirial ɛn laminɛshɔn kɔnsumabl fɔ B2B bayer dɛn. Di kɔstɔma dɛn kin gi dɛn prɛs mɔdel, plet dimɛnshɔn, finish we dɛn nid, kad matirial ɛn ɔda kwantiti fɔ tɔk bɔt mat, glos ɔ kɔstɔmayz lamination-plet opshɔn dɛn.
Fɔ di wan dɛn we de mek plastic-kad na Rɔshia, fɔ pik di rayt lamination plet nɔ jɔs min fɔ kɔmpia di prayz. Plɛt flatnɛs, tiknɛs, sɔfays rɔfnɛs, finish kɔnsistɛns, durabiliti ɛn kɔmpatibiliti wit di lamineshɔn prɔses ɔl kin inflɔws di kad we dɔn dɔn.
Di kɔmni dɛn we de insay dis 2026 ɔvaviu ripresent difrɛn wok dɛn ɔlsay na di makit, frɔm dairekt plet saplay dɛn to kad manifakta ɛn ikwipmɛnt prɔvayda dɛn. So di wan dɛn we de bay fɔ no if dɛn nid faktri sɔs, Rɔshian distribyushɔn, kɔmplit kad-prɔdakshɔn sɔlvishɔn ɔ spɛshal plet manifakta bifo dɛn sɛn RFQ.
Fɔ kɔstɔmayz mat, glos ɔ patɛn kad lamineshɔn stɛl plet, WALLIS kin rivyu yu plet dimɛnshɔn, rikwayd sɔfayz finish, kad matirial ɛn prodakshɔn rikwaymɛnt.
