Top 15 Kaad Lamination Dade Mprɛte Suppliers wɔ Foreign customer 2026

Mmuae a Ɛyɛ Ntɛm: Wɔn a Wɔde Kaad Lamination Dade Mprɛte Ma Foreign customer

Matte card lamination dade mprɛte yɛ pɛpɛɛpɛ press mprɛte a wɔde di dwuma bere a wɔde ɔhyew lamination PVC , PETG , polycarbonate ( PC ), ABS ne plastic-kaad nneɛma afoforo. Mprɛte no ani boa ma wohu sɛnea laminated card no bɛyɛ awiei koraa, a matte, semi-matte, glossy, silk anaa textured nsunsuanso ka ho.

Wɔ adetɔfo a wɔsom Foreign customer plastic-kaad gua no fam no, nea ɛka wɔn a wɔde nneɛma ma no ho ne Foreign customerfo a wɔkyekyɛ nneɛma, amanaman ntam lamination-plate ayɛfo ne nnwumakuw a wɔyɛ kaad a wɔkyerɛ sɛ mpɔtam hɔ hwehwɛ saa nneɛma yi. Nea ɛbɛyɛ na ntotoho no ayɛ nokware no, asɛm yi tetew wɔn a wɔde lamination-plate ma tẽẽ anaasɛ ɛfa ho no fi Foreign customerfo a wɔyɛ kaad ne nnwumakuw a wɔyɛ nnwinnade a egyina hɔ ma gua a ɛba fam ahwehwɛde no ho.

Dɛn Ne Matte Card Lamination Dade Mprɛte?

Matte card lamination dade mprɛte yɛ pɛpɛɛpɛ dade mprɛte a wɔde di dwuma wɔ press-lamination mfiri bere a plastic-kard reyɛ. Wɔde kaad nneɛma a wɔasiesie a wɔaboaboa ano gu lamination mprɛte ntam na wɔyɛ ho adwuma wɔ ɔhyew ne nhyɛso a wɔahyɛ so ase. Ɛgyina sɛnea wɔyɛɛ kaad no so no, nneɛma a ɛne no hyia betumi ayɛ PVC , PETG , polycarbonate ( PC ), ABS ne kaad substrates a ɛfa ho.

Esiane sɛ mprɛte no di nkitaho wɔ akyi kaad no ani bere a wɔreyɛ lamination nti, nea wɔde wie no nya nea efi aniwa ne nea wɔde nsa ka no so nkɛntɛnso. Wobetumi de lamination mprɛte ahorow adi dwuma de ayɛ:

• Matte kaad a ɛwɔ soro

• Nneɛma a ɛwɔ soro a ɛyɛ fã bi matte

• Nneɛma a ɛwɔ soro a ɛhyerɛn kɛse

• Silk a wɔde wie

• Nneɛma a wɔakyerɛw so

• Amanne kwan so nhwɛso ahorow

Eyi ma lamination plate no yɛ adeyɛ no fã a ɛho hia sen sɛ ɛbɛyɛ separator a ɛnyɛ den. Plate nneɛma, soro roughness, flatness, thickness, finish consistency ne resistance to repeated heating cycles nyinaa betumi aka production adwumayɛ ne card a etwa to no hwɛbea.

Sɛnea Wɔbɛhwɛ Kaad Lamination Dade Mprɛte Supplier

Mprɛte Nneɛma ne Nea Ɛyɛ Den

Ɛsɛ sɛ adetɔfo si so dua sɛ prɛte ade no ne sɛ ebia ne denden ne ne soro ayaresa fata ma ɔhyew, mia ne ahotew kyinhyia mpɛn pii. Wobetumi apaw dade a ɛnyɛ den ne mprɛte nneɛma afoforo a wɔayɛ no yiye sɛnea lamination nhyehyɛe ne ɔsom nkwa nna a wɔhwehwɛ te.

Surface Roughness ne Finish a Ɛyɛ Fɛ

Matte ne semi-matte mprɛte hwehwɛ sɛ wɔhwɛ soro a ɛyɛ mmerɛw sɛnea ɛbɛyɛ a wobetumi ayɛ kaad no ani a wɔawie no mpɛn pii fi batch biako so. Ɛsɛ sɛ adetɔfo bisa ɔfasu nhwɛso anaa roughness nkyerɛkyerɛmu a wɔapene so sen sɛ wɔde wɔn ho bɛto nkyerɛkyerɛmu te sɛ 'matte' anaa 'fine matte.' nkutoo so.

Nneɛma a Ɛyɛ Den ne Nea Ɛyɛ Petee

Ɛsɛ sɛ mprɛte no kɛse ne lamination press nhyehyɛe ne production stack hyia. Nneɛma a wɔde kyerɛw asɛm yi fibea no bi ne nhwɛso ahorow a ɛfa 0.6 mm, 0.8 mm ne 1.0 mm mprɛte a efi wɔn a wɔde nneɛma ma pii hɔ. Flatness ne dimensional consistency ho hia pɛpɛɛpɛ ma nhyɛso kyekyɛ a ɛyɛ pɛ.

Size ne Customization

Standard A4-format mprɛte abu so wɔ card-lamination nhyehyɛe nketewa mu, bere a mfiridwuma mu nhama betumi ahwehwɛ sɛ wɔyɛ nsusuwii ahorow, ntwea so nsɛm, anoano a wɔde wie anaasɛ ɔfasu nsusuwso. Ɛsɛ sɛ adetɔfo de press model, dimensions a wɔhwehwɛ ne card format no mena bere a wɔrebisa quotation no.

Nkitahodi a ɛne Kaad nneɛma s

Ɛsɛ sɛ wɔde kaad nhyehyɛe a edi mũ no bom hwɛ lamination mprɛte no, a PVC , PETG , PC , ABS , Overlay film , layers a wɔatintim ne RFID anaa smart-card afã biara ka ho. Ɛsɛ sɛ wɔma nhyehyɛe a etwa to a ɛfa ɔhyew, nhyɛso ne kyinhyia bere ho no yɛ nokware wɔ adetɔfo no ankasa nnwinnade so.

Lamination Plate Suppliers a Wɔsom Tẽẽ na Ɛfata a Wɔsom Foreign customer Guadibea

Nnwumakuw awotwe a edi kan a ɛwɔ ase ha no ne nea ɛfa adetɔfo a wɔrehwehwɛ kaad lamination dade mprɛte, kaad-ayɛde a wɔde di dwuma anaasɛ lamination-plate a wɔyɛ titiriw no ho tẽẽ sen biara. Ɛsɛ sɛ wosi wɔn mprempren nneɛma ahorow pɔtee ne sɛnea wɔtɔn no so dua tẽẽ ansa na wɔatɔ.

1. WALLIS

WALLIS yɛ na ɛde kaad nneɛma ne lamination nneɛma a wɔde di dwuma, a dade mprɛte a wɔde di dwuma wɔ plastic-kaad yɛ mu ka ho kɔ amannɔne. Nea ɛka ho ne matte, high-gloss ne customized patterned lamination mprɛte, a ɛka ho ne silicone ne wool lamination pads.

Nneɛma a ɛfa ho: matte lamination dade mprɛte, dade mprɛte a ɛhyerɛn kɛse, dade mprɛte a wɔayɛ ho mfonini anaasɛ wɔayɛ no nwene, silicone lamination pads, wool lamination pads, ne akɛse anaa nea wɔayɛ no sɛnea wɔpɛ.

Wɔ Foreign customerfoɔ a wɔyɛ kaad ne wɔn a wɔkyekyɛ kaad-nneɛma no fam no, WALLIS fata sɛ amanaman ntam adwumayɛbea a wɔde nneɛma ma wɔ akɛseɛ, OEM ne ahyɛdeɛ a wɔahyɛ da ayɛ. Ɛsɛ sɛ adetɔfo si mprɛte no nsusuwii a wɔhwehwɛ, ne kɛse, ne soro awie ne mfiri a wɔde yɛ lamination so dua ansa na wɔakra.

2. Verilion / Cardel na ɔkyerɛwee

Wɔakyerɛ Verilion wɔ nneɛma a wonya fi mu no mu sɛ Foreign customerni a ɛde nneɛma a wɔde yɛ kaad ne nneɛma a wɔde yɛ lamination ma. Ne Cardel line no bi ne lamination mprɛte a wɔde yɛ plastic, sikakorabea, smart, contactless ne combination cards.

Nneɛma a efi mu ba no hyɛ stainless-steel lamination mprɛte a ɛwɔ 0.8 mm ne 1.0 mm thicknesses nsow, a ɛka ho ne controlled surface roughness ne custom textured options. Saa nsɛm yi ma Verilion / Cardel fata adetɔfo a wohia mprɛte nsusuwii a wɔakyerɛw ne ɔfasu su.

3. Komplekt Liga a wɔde di dwuma

Komplekt Liga yɛ Foreign customer adwumakuw bi a wɔde nneɛma ma a ɛsom nnwuma a wɔyɛ plastic-kaad. Ne katalog no bi ne dade lamination mprɛte a ɛyɛ glossy, matte ne textured nkyerɛase ahorow.

Nneɛma a wɔde fibea no kyerɛw A4 mprɛte a ne kɛse yɛ mm 0.6 ne mm 0.8 ne nkyerɛase ahorow a wɔakyerɛw so a ne kɛse yɛ mm 0.8 ne mm. Eyi ma adwumakuw no ho wɔ mfaso ma adetɔfo a wɔde mpɔtam hɔ Foreign customer nneɛma, nneɛma pii a wɔde wie wɔ soro ne standard card-production formats toto ho.

4. U.S. AKWANKYERƐ

US PLAST de nneɛma a wɔde di dwuma ne nnwinnade a wɔde yɛ plastic-kaad ma wɔ Foreign customer. Nea ɛka ho ne dade lamination mprɛte, thermal pads, magnetic-stripe nneɛma, Overlay film s ne nneɛma afoforo a wɔde yɛ.

Wɔka ne lamination-plate afɔrebɔ ho asɛm sɛ ɛka ahwehwɛ, matte ne textured mprɛte ma press laminators, na ɛma ɛyɛ mpɔtam hɔ fibea a ɛfata ma nnwumakuw a wɔtɔ nneɛma a wɔde yɛ kaad a ɛtrɛw.

5. KAD-PROM a wɔde kyerɛw nsɛm

Wɔkyerɛ sɛ CARD-PROM yɛ Foreign customer adwumakuw a ɛde plastic-kaad nneɛma ne nnwinnade ma. Ne katalog no bi ne matte dade mprɛte a wɔde yɛ A4 press laminators ne afei nso ahwehwɛ-awie mprɛte ne ɔhyew-kyekyɛ nneɛma.

Sourcing akuw a ɛfa ho: matte dade mprɛte, ahwehwɛ dade mprɛte, kaad laminate, thermal pads, plastic-kaad nkrataa ne press-lamination consumables.

6. 4Plate no so

4Plate yɛ nea TRUSTECH ka ho asɛm sɛ amanaman ntam ɔbenfo wɔ standard ne ahobammɔ kɛse lamination plates ma plastic cards ne aban nkrataa.

Ne gyinabea no fa ho titiriw ma wɔn a wɔyɛ plastic cards, smart cards, identity products ne ahobammɔ nkrataa a ɛhwehwɛ sɛ wɔhwɛ lamination surfaces so.

7. Schwan-Lamination a wɔde yɛ adwuma

Schwan-Lamination yɛ amanaman ntam adwumakuw a ne ho akokwaw wɔ mfiridwuma mu lamination mprɛte mu. Nneɛma a wonya fi mu no kyerɛ dade a ɛnyɛ den, aluminium ne dade a ɛyɛ den mprɛte a wɔpaw ka bom ne nsusuwii ne akɛse a wɔayɛ no sɛnea wɔpɛ.

Nneɛma a ɛwɔ soro a ɛyɛ mmerɛw ne nea ɛhyerɛn a wɔahyɛ so no ho hia bere a ɛho hia sɛ wɔsan yɛ kaad-anim a wɔsan yɛ no. Hardened plate options nso betumi ayɛ nea ɛfata wɔ baabi a scratch resistance ne long service life yɛ nneɛma a ɛho hia titiriw.

8. RSID Ano Aduru

RSID Solutions de lamination mprɛte a wɔde yɛ plastic-kaad ma. Ne range no bi ne matte ne semi-matte mprɛte a wɔayɛ no sɛnea wɔpɛ ne nea wɔahyɛ so wɔ soro roughness.

Nneɛma a wɔde fibea no kyerɛ sɛnea ne kɛse yɛ mm 0.6, mm 0.8 ne mm 1.0 na ɛne PVC , PC , ABS ne PETG hyia. Wɔakyerɛw anoano a ɛyɛ kurukuruwa ne ɔhyew a ɛkɔ soro a ɛko tia nso ka nsɛm a ɛfata ho.

Foreign customer Kaad Yɛfo ne Nnwinnade Nnwumakuw a Ɛfa Lamination Plate Ahwehwɛde Ho

Ɛnsɛ sɛ wɔka nnwumakuw ason a edidi so yi ho asɛm ara kwa sɛ wɔyɛ matte steel-plate. Wɔde ka ho efisɛ wogyina hɔ ma plastic-card a wɔyɛ, lamination-equipment ne consumables gua a ɛwɔ Foreign customer a ɛwɔ fam no. Saa nsonsonoe yi ma wɔn a wɔde nneɛma ma no yɛ pɛpɛɛpɛ na ɛboa adetɔfo ma wɔte baabi a wɔde lamination mprɛte di dwuma ankasa ase.

9. NCS / NPO Nkyerɛwde foforo a wɔde tintim nhoma

Wɔakyerɛ sɛ NCS / NPO Neoprint wɔ nneɛma a wɔde fi mu bae no mu sɛ Foreign customerfo a wɔyɛ plastic-kaad a ɛwɔ Saint Petersburg. Nea ɛka ne yɛ ho ne tintim, lamination ne punching.

NCS fa asɛm yi ho sɛ mfiridwuma mu dwumayɛni a ɛwɔ nsuo ase sen sɛ ɛbɛyɛ dadeɛ mprɛte yɛfo a wɔasi so dua. Ne dwumadi dwumadi no kyerɛkyerɛ mfiridwuma mu ahwehwɛde ahorow a ɛwɔ laminated-card a wɔyɛ wɔ Foreign customer gua so no mu.

10. AKArd na ɔkyerɛwee

Wɔaka AKArd ho asɛm wɔ fibea nneɛma no mu ama ne nkyerɛkyerɛmu a ɛfa laminated-card production ho, baabi a wɔde plastic nkratafa ne lamination films mia dade mprɛte ntam wɔ ɔhyew ne nhyɛso a wɔahyɛ so ase. Wobetumi de mprɛte so ahorow adi dwuma de anya matte anaa glossy card finishes.

Wɔ lamination-plate a wɔde ma no fam no, nnwumakuw te sɛ AKArd gyina hɔ ma adetɔfo fã a ɛwɔ fam a ɛsɔ mprɛte adwumayɛ bom ne ɔhyew, nhyɛso ne bere a wɔde mia so.

11. Poligraf Zashchita a ɔyɛ ɔkyerɛwfo

Poligraf Zashchita yɛ Foreign customer adwumakuw bi a wɔyɛ kaad. Nneɛma a wonya fi mu no ka sɛ ɛyɛ plastic kaad ahorow pii, a nneɛma a wɔde matte, glossy ne transparent wie ka ho.

Nea ɛfa ho ma wɔn a wɔde lamination-plate ma no fi kaad a wɔyɛ no kɛse a ɛhwehwɛ sɛ wɔsan yɛ no yiye wɔ soro ne nneɛma a wɔde di dwuma a wotumi de ho to so.

12. Orenkart na ɔkyerɛwee

Orenkart yɛ Foreign customerfo adwumakuw bi a wɔyɛ kaad a wɔagye din wɔ plastic-kaad a wɔyɛ mu. Nneɛma a wonya fi mu no kyerɛkyerɛ adeyɛ a edi mũ ne nneɛma ahorow a ɛka ho a plastic ne dade nkrataa ka ho.

Wɔ wɔn a wɔde mprɛte ne nneɛma a wɔde di dwuma ma no fam no, Orenkart gyina hɔ ma Foreign customer kaad-yɛ gua a wɔde asi hɔ no mmom sen sɛ ɛbɛyɛ fibea a wɔagye atom sɛ wɔyɛ lamination-plate.

13. Kaad Mfiridwuma

Card Technology yɛ adwumakuw bi a wɔyɛ kaad wɔ Saint Petersburg. Ne kaad nneɛma no de lamination ne surface-finish options ahorow di dwuma ma applications te sɛ loyalty, membership ne promotional cards.

Eyi ma adwumakuw no fata sɛ downstream application reference ma manufacturers a wɔtɔn lamination plates ne card-production nneɛma afoforo.

14. Ostcard a wɔde kyerɛw nsɛm

Ostcard de mfiridwuma mu lamination nhyehyɛe ahorow di dwuma wɔ mmeae a wɔyɛ plastic-kaad. Nneɛma a efi mu ba no kyerɛ Lauffer lamination mfiri wɔ ne nnwumayɛ nhyehyɛe mu.

Ɛno ma Ostcard fata sɛ mfiridwuma mu ɔdefoɔ a ɔde lamination plates, lamination pads, plastic-card sheets, RFID nneɛma ne nneɛma foforɔ a wɔde yɛ adwuma di dwuma.

15. San-San na ɛwɔ hɔ

San-San yɛ Foreign customer adwumakuw bi a ɛde mfiri a wɔde yɛ plastic-kaad ma. Ne Easy Card lamination-equipment nkrataa no ka dade mprɛte ho sɛ A4 press-lamination nhyehyɛe no fã.

Ɛwom sɛ San-San yɛ nnwinnade a wɔde ma titiriw sen sɛ ɛbɛyɛ lamination-plate yɛfo a wɔatu wɔn ho ama de, nanso ɛfata ma adetɔfo a wɔresusuw kaad-lamination nhyehyɛe nketewa a edi mũ ho.

Matte vs. Glossy Kaad Lamination Dade Mprɛte

Paw a ɛteɛ no gyina kaad no nhyehyɛe, ɔfasu so nkɛntɛnso a wɔhwehwɛ, tintim kɔla, downstream personalization kwan ne adetɔfo pɔtee. Ɛsɛ sɛ adetɔfo pene honam fam nhwɛsode so na wɔyɛ nea wɔyɛ no sɔhwɛ ansa na wɔayɛ prɛte a wɔde wie no gyinapɛn.

Nea Enti a Matte Steel Mprɛte Ho Hia wɔ Plastic Kaad a Wɔyɛ Mu

Surface Finish a ɛkɔ so daa

Mprɛte ani a wɔahyɛ so boa ma wɔsan yɛ matte a ɛkɔ so daa wɔ nneɛma a wɔyɛ no mpɛn pii mu. Eyi ho hia titiriw bere a wɔyɛ kaad nhyehyɛe ahorow wɔ bere tenten mu anaasɛ wɔ ntonto pii so no.

Glare a wɔatew so

Matte a ɛwɔ soro no trɛw hann a ɛdannan no mu na ɛma wotumi hu ade a ɛyɛ mmerɛw sen mprɛte a wɔayɛ no fɛfɛɛfɛ kɛse. Eyi betumi ayɛ nea mfaso wɔ so ama nkrataa a ɛyɛ fɛ, nneɛma a wɔde hu nnipa ne kɔla tuntum a wɔayɛ.

Nneɛma nketenkete a Ɛwɔ Anim a Wotumi Hu a Ɛba fam

Matte a ɛwɔ soro betumi ama nsateaa nkyerɛwee ne aniwa mu sintɔ nketenkete bi ayɛ nea wontumi nhu kɛse te sɛ nea ɛhyerɛn kɛse a ɛma hann no. Adwumayɛ ankasa gyina prɛte no nwene, kaad nneɛma ne adeyɛ kwan so.

Compatability Ne Kaad Adansi Pii

Ɛgyina nea ɔde ma no nkyerɛkyerɛmu ne lamination nhyehyɛe so no, wobetumi de matte mprɛte adi dwuma ne PVC , PETG , PC , ABS ne kaad nhyehyɛe a ɛfa ho. Ɛsɛ sɛ adetɔfo si so dua sɛ ɛne wɔn nneɛma a wɔaboaboa ano nyinaa hyia sen sɛ wɔbɛpaw prɛte a egyina kaad nneɛma nkutoo so.

Sɛnea Wɔkyerɛ Matte Lamination Steel Plate ma RFQ

RFQ a emu da hɔ boa wɔn a wɔde nneɛma ma no ma wɔkamfo mprɛte a ɛfata kyerɛ na ɛtew bere a wɔde yɛ nhwɛsode no so. Ɛsɛ sɛ adetɔfo de nsɛm a edidi so yi pii ma sɛnea wobetumi:

Nsɛm a Wɔtaa Bisa Fa Card Lamination Steel Plates Ho

Dɛn ne kaad lamination dade mprɛte?

Kaad lamination dade mprɛte yɛ dade mprɛte a ɛyɛ pɛpɛɛpɛ a wɔde gu hot-press lamination stack mu bere a wɔreyɛ plastic-kaad. Ɛboa ma ɔhyew ne nhyɛso kɔ baabi foforo bere a ne soro awie no nya sɛnea kaad no bɛyɛ nea etwa to no so nkɛntɛnso no.

Nsonsonoe bɛn na ɛwɔ matte ne glossy lamination plates ntam?

Matte mprɛte wɔ nwene a wɔahyɛ so a ɛma hann a ɛba fam wie, bere a mprɛte a ɛhyerɛn no wɔ soro a wɔayɛ no fɛfɛɛfɛ kɛse a ɛma hann a emu yɛ den na ɛma kaad no yɛ hyew kɛse.

Nneɛma a ɛyɛ den bɛn na ɛtaa ba ma card lamination mprɛte?

Nneɛma a wɔde fibea a wɔasan ahwɛ mu ama asɛm yi no bi ne mprɛte a ne kɛse yɛ mm 0.6, mm 0.8 ne mm 1.0 ho nhwɛso. Ne kɛse a ɛfata gyina lamination press, stack nhyehyɛe ne supplier specification so.

So wobetumi ayɛ lamination dade mprɛte ahorow no sɛnea wɔpɛ?

Aane. Ɛgyina nea ɔde ma no so no, customization betumi ayɛ dimensions, thickness, surface roughness, matte level, texture, pattern, edge treatment ne mprɛte su afoforo.

Kaad nneɛma bɛn na wobetumi de mprɛte yi ayɛ laminate?

Ɛgyina ɔkwan a wɔfa so yɛ ne mprɛte nkyerɛkyerɛmu so no, wobetumi de lamination mprɛte adi dwuma ne PVC , PETG , PC , ABS ne kaad nhyehyɛe afoforo. Ɛsɛ sɛ wɔma ɛne nneɛma a wɔaboaboa ano a edi mũ ne nhyehyɛe a wɔde yɛ nneɛma no di nsɛ.

So nnwumakuw a ɛwɔ saa din yi mu nyinaa yɛ dade mprɛte a wɔyɛ?

Dabi, asɛm no hyɛ da kyerɛ nsonsonoe a ɛda wɔn a wɔde mprɛte ma tẽẽ anaasɛ ɛfa ho no ntam wɔ Foreign customerfo a wɔyɛ kaad ne nnwumakuw a wɔyɛ nnwinnade ho. Wɔde nea etwa to no ka ho efisɛ egyina hɔ ma gua a ɛwɔ nsu no ase a wɔde lamination mprɛte ne nneɛma a wɔde di dwuma a ɛfa ho di dwuma wom.

Dɛn na ɛsɛ sɛ adetɔfo hwɛ ansa na wɔakra nneɛma pii?

Si mprɛte nsusuwii, ne kɛse, petee, nneɛma, ɔfasu roughness, ano tebea, compatibility ne lamination press, apene soro nhwɛsode, packaging ne repeat-order consistency. Wɔkamfo kyerɛ sɛ wɔnsɔ nneɛma a wɔyɛ no hwɛ ansa na wɔakra kɛse.

Dɛn nti na susuw WALLIS ho ma matte card lamination dade mprɛte?

WALLIS de card-production nneɛma ne lamination consumables ma B2B adetɔfo. Adetɔfo betumi de wɔn press model, mprɛte nsusuwii, ahwehwɛde wie, card nneɛma ne order dodow ama de asusuw matte, glossy anaasɛ customized lamination-plate options.

Awie

Wɔ Foreign customerfo a wɔyɛ plastic-kaad fam no, lamination plate a ɛfata a wɔbɛpaw no hwehwɛ pii sen bo a wɔde bɛtoto ho. Plate flatness, thickness, surface roughness, finish consistency, durability ne compatibility ne lamination nhyehyɛe no nyinaa betumi anya card a wɔawie no so nkɛntɛnso.

Nnwumakuw a wɔwɔ saa 2026 nsusuwii yi mu no gyina hɔ ma dwumadie ahodoɔ wɔ gua no nyinaa so, ɛfiri wɔn a wɔde mprɛte ma tẽẽ kɔsi wɔn a wɔyɛ kaad ne wɔn a wɔde nnwinnadeɛ ma. Enti ɛsɛ sɛ adetɔfo hu sɛ ebia wohia adwumayɛbea fibea, Foreign customerfo a wɔkyekyɛ nneɛma, kaad-yɛ ano aduru a edi mũ anaasɛ mprɛte yɛfo titiriw ansa na wɔde RFQ amena.

Sɛ wopɛ matte, glossy anaa patterned card lamination dade mprɛte a wɔayɛ no sɛnea wopɛ a, WALLIS betumi ahwɛ wo mprɛte nsusuwii, nea wɔhwehwɛ sɛ wowie wɔ soro, kaad nneɛma ne nneɛma a wɔyɛ.

Di nkitaho WALLIS ma Lamination Dade Mprɛte