Nhwɛsoɔ: 6 Ɔkyerɛwfoɔ: Site Editor Bere a wɔde tintimii: 2024-04-12 Mfiase: Beaeɛ
PVC kanea ntama yɛ plastic nkratafa a ɛyɛ den anaa ɛyɛ den fã a wɔde ma nhyehyɛe, hann a ɛtrɛw ne afɛfɛde a ɛwɔ pon so kanea, fam akanea, kanea a ɛsensɛn so, ɔfasu so kanea ne nneɛma afoforo a wɔde kanea wɔ dan mu. Ɛgyina sɛnea wɔayɛ ne nea wɔde awie so no, lampshade-grade PVC betumi ama hann tẽẽ ayɛ mmerɛw, atew hann a wotumi hu so, de hann fibea no asie na ama ntama, ntama, ntama a wɔde tintim anaa nneɛma afoforo a wɔde asiesie akyi a ɛyɛ den.
Nanso, wɔ wɔn a wɔyɛ kanea fam no, ɛsɛ sɛ PVC krataa a wɔbɛpaw no hwehwɛ pii sen sɛ wɔbɛpaw plastic panel fitaa. Adwumayɛ a etwa to no gyina ne kɛse, ne stiffness, translucency, opacity, hann diffusion, soro wie, kɔla, tintim anaa lamination nhyehyɛe, kanea geometry, hann-fibea hyew ne ahobammɔ nkyerɛkyerɛmu a wɔhwehwɛ.
Saa akwankyerɛ yi kyerɛkyerɛ sɛnea PVC kanea a wɔde yɛ kanea nneɛma yɛ adwuma, sɛnea wɔn a wɔyɛ no betumi apaw grade a ɛfata ne parameters a ɛsɛ sɛ wɔde ka ho bere a wɔrebisa nhwɛsode anaa nsɛm a wɔafa aka ama aguadi kanea a wɔyɛ no.
PVC kanea akatasoɔ krataa yɛ hann-a ɛhwɛ ne nhyehyɛɛ so a wɔde polyvinyl chloride na ɛyɛ de di dwuma wɔ mu anaa sɛ kanea akatasoɔ adansiɛ fã. Wobetumi de ama wɔ rigid anaa semi-rigid kwan so a egyina stiffness a wɔhwehwɛ ne forming suban so.
Nea ɛnte sɛ PVC a emu da hɔ daa, a wɔpaw bere a nea wotumi hu denam krataa no so ho hia no, kanea a wɔde yɛ kanea no taa yɛ nea ɛyɛ hann, nufusu fitaa, matte, frosted anaasɛ textured sɛnea ɛbɛyɛ a ɛtrɛw hann mu sen sɛ ɛde bɔlɔb anaa LED fibea no mfonini a ɛyɛ nnam bɛkɔ.
Wɔ ntama kanea a ɛyɛ den mu no, PVC panel no nso betumi ayɛ adwuma sɛ emu dansi mmoa bere a akyi ntama, ntama anaa afɛfɛde a wɔde asiesie so ma ɛyɛ nea etwa to a wotumi hu.
Hann a wɔde fa kwan so no kyerɛkyerɛ hann dodow a wotumi hu fa PVC panel no mu. Mpɛn pii no, grade a ɛyɛ hann kɛse ma ɛhyerɛn kɛse, bere a aduru a ɛnyɛ hann anaasɛ ɛyɛ fitaa te sɛ nufusu no de bɔlɔb no sie yiye na ɛma ɛyɛ mmerɛw wɔ aniwa so.
Botae biako biara nni hɔ a ɛfata a wɔde fa kanea biara ho. Kari pɛ a ɛteɛ no gyina kanea kɛse, LED a ɛba, kwan a ɛda hann fibea ne sunsuma ntam, akyi ntama ne ambient effect a wɔpɛ so.
Diffusion kyerɛkyerɛ sɛnea krataa no trɛw hann a ɛba no mu yiye wɔ akwan horow pii so no mu. Diffuser a wɔapaw no yiye ma hann fibea no a wotumi hu no so tew na ɛboa ma wɔyɛ hann a ɛyɛ pɛ.
Sɛ krataa no mu da hɔ dodo ma kanea no nhyehyɛe a, LED ankorankoro anaa bɔlɔb no betumi akɔ so ada adi pefee na ama mmeae a ɛhyerɛn a ɛnyɛ dɛ aba. Nufusu fitaa, matte, frosted anaa textured PVC betumi aboa ma wɔatew saa mmeae a ɛyɛ hyew a wotumi hu yi so.
Ɛsɛ sɛ adetɔfo hwehwɛ nneɛma no mu wɔ hann fibea ankasa a wɔpɛ sɛ wɔyɛ no ase sen sɛ wobebu ntrɛwmu atɛn afi nhwɛsode a enni hann nkutoo mu.
| PVC Lampshade Type | Su Titiriw | a Wɔde Di Dwuma |
|---|---|---|
| Nufusu Fitaa PVC | Ɛma bɔlɔb no sie kɛse na ɛma hann a ɛyɛ mmerɛw na ɛyɛ pɛ | Table akanea, fam akanea, pendants ne ahɔhodan mu kanea |
| Ɛyɛ nea ɛyɛ hann PVC | Ɛma hann pii fa mu bere a ɛda so ara tew nea wotumi hu tẽẽ no so | Nneɛma a wɔde siesie fie ne hann a ɛma hann a ɛhyerɛn kɛse |
| Matte / Nsukyenee PVC | Low-glare anim a ɛyɛ mmerɛw awie | Nnɛyi kanea a wɔde siesie fie ne aguadi mu |
| Embossed / Nkyerɛwee PVC | Ɔde decorative texture ka ho bere a ɔsesa hann a wotumi hu nsusuwii ahorow no | Designer kanea ne ahɔhoyɛ dan mu nneɛma |
| Ne Ho a Wɔde Bata Ho PVC | Nea ɛka ho anaasɛ wɔde ka adhesive nhyehyɛe a wɔde yɛ ntama anaa wallpaper lamination ho | Ntama a ɛyɛ den a wɔde akanea ayɛ ne sunsuma a ɛyɛ den a wɔde yɛ nhyiam |
| Wɔatintim PVC | Ɔsoa mfonini ahorow a wɔde asiesie, nsusuwso anaa ahyɛnsode | Retail, ahɔhoyɛ ne kanea a wɔde hyɛ nkurɔfo nkuran |
Wobetumi ayɛ kanea-grade PVC anaasɛ wɔawie de atrɛw hann mu na ɛtew hann fibea no a wotumi hu tẽẽ no so. Eyi ma ɛyɛ nea mfaso wɔ so ma nneɛma a wɔde si hɔ a ahotɔ a wotumi hu ne sɛnea hann wom ho hia.
Ɛgyina ne kɛseɛ ne ne nhyehyɛɛ so no, wɔbɛtumi atwitwa PVC na wɔayɛ no drum, cylinder, conical, rectangular ne lampshade geometries foforɔ.
Wobetumi asusuw Matte, frosted, smooth, glossy ne embossed nsunsuanso ho sɛnea aniwa nhyehyɛe ne diffusion ahwehwɛde te.
PVC betumi ayɛ adwuma sɛ ɔdansi akyi a wɔde yɛ ntama, ntama, ntama, sini a wɔde siesie fie ne nneɛma afoforo a wɔde kata so. Ɛsɛ sɛ wɔde ade a wɔde kata so ankasa no si so dua sɛ adhesive hyia.
Wobetumi asusuw PVC soro a ɛfata ho ama screen printing, UV printing anaa akwan foforo a wɔfa so tintim nneɛma a wɔde asiesie, a ɛma wɔn a wɔyɛ kanea no tumi yɛ custom patterns ne branded shades.
PVC kanea ntama a ɛyɛ tratraa ma nhyehyɛe a wɔmfa emu duru dodo nka fixture a wɔawie no ho, a ebetumi ama nsakrae, nhyiam ne po so hyɛn ayɛ mmerɛw.
Thickness ka stiffness, bendability, weight, cutting suban ne kanea no nsusuwii a wɔawie. Amansan nyinaa mu duru biara nni hɔ ma adwini biara.
| Design Ahwehwɛde a Wɔpaw | Ho Nsusuwii |
|---|---|
| Nkekae a Ɛyɛ Curved Shades | Ebia grade a ɛyɛ mmerɛw kɛse bɛma rolling ne curved forming ayɛ mmerɛw. |
| Drum Shades akɛse | Ebia ɛho behia sɛ wɔma ɛyɛ den kɛse na ama wɔatew sagging so na wɔakura kurukuruwa no mu. |
| Fabric-Laminated Shades a Wɔde Ntama Ayɛ | Ɛsɛ sɛ wɔde ntama mu duru, adhesive ne rolling radius yɛ pɛpɛɛpɛ. |
| Nneɛma a Ɛgyina Hɔ PVC Shades | Ebia ɛho behia sɛ wɔde panel no yɛ den kɛse efisɛ akyi ntama biara nni hɔ a ɛbɛboa ɔdan no. |
| Die-Cut Nneɛma a Wɔayɛ | Si so dua sɛ wɔatwa no pɛpɛɛpɛ, ano tebea ne crease anaa fold suban ansa na wɔayɛ no kɛse. |
Ɛsɛ sɛ wɔsɔ kanea nneɛma ne hann fibea ankasa bom bere nyinaa. PVC lampshade panels wɔtaa susuw ho ma LED ne kanea nhyehyɛe afoforo a ɛnyɛ hyew pii, nanso sɛnea ɛfata no gyina fixture nhyehyɛe a edi mũ so.
Nneɛma a ɛho hia ne LED wattage, draiver ɔhyew, mframa, kwan a ɛda hann fibea ne PVC panel ntam, fixture geometry ne emu adwumayɛ hyew a ɛkorɔn sen biara.
Ɛsɛ sɛ adetɔfo de ɔsom mu hyew a wɔhwɛ kwan no ma bere a wɔrebisa nneɛma a wɔde bɛyɛ kanea foforo no. Ɛnsɛ sɛ wɔpaw ade a wɔde kanea akata so esiane sɛ ɛte nka sɛ ɛyɛ nwini bere a wɔreyɛ sɔhwɛ tiawa bi a wɔde aniwa hu nkutoo nti.
Ogya suban betumi ayɛ ahwehwɛde a ɛho hia wɔ kanea afã horow mu, titiriw wɔ aguadi, ahɔhoyɛ anaa anyinam ahoɔden nneɛma a wɔahyɛ ho mmara mu. Nanso, ɛnyɛ PVC krataa biara na ɛwɔ ogya a ɛmma ogya ntumi nkɔ mu nkyekyɛmu koro.
Sɛ kanea adwuma bi hwehwɛ sɛ wɔyɛ adwuma pɔtee bi a ɛmma ogya ntumi nhyew anaasɛ ɛdum ne ho a, ɛsɛ sɛ adetɔfo no de gyinapɛn a wɔhwehwɛ pɛpɛɛpɛ, nkyekyɛmu, ne kɛse ne tebea a wɔde bedi dwuma awiei ma ansa na wɔapaw nneɛma.
Ɛsɛ sɛ sɔhwɛ nkrataa a ɛfoa so no ne nneɛma dodow pɔtee a wɔretɔ no hyia sen sɛ wɔbɛfa no sɛ efi nneɛma ho nkyerɛkyerɛmu a ɛyɛ generic PVC mu.
PVC panels betumi adi dwuma sɛ akyi a wɔde yɛ cotton, linen, polyester, velvet ne ntama afoforo a wɔde siesie fie. Ɛsɛ sɛ ade a wɔde nkata so no ma ɛka bom a ɛdɔɔso a ɛnyɛ nkekae, mogya mfi mu anaasɛ ɛnyɛ ahurututu a wotumi hu wɔ kanea a wɔawie no so.
Wobetumi de afɛfɛde wallpaper ne krataa a wɔatintim nso ayɛ laminated akɔ PVC akyi a ɛfata. Ɛsɛ sɛ adetɔfo hwɛ sɛnea adhesive hyia, dimensional stability ne laminated panel no hwɛbea bere a wɔahyerɛn no.
Wobetumi de tintim tẽẽ adi dwuma ama nsusuwso, ahyɛnsode ne kanea a wɔde asiesie a wɔakyerɛw so. Ɛsɛ sɛ wɔsɔ aduruyɛ a ɛwɔ soro, ink nnuru ne tebea a ɛma ɛyɛ yare hwɛ de si so dua sɛ ɛbata ho na wɔakwati sɛ wɔbɛkyinkyim nneɛma a ɛyɛ tratraa PVC .
PVC de akyi ne diffuser a mfaso wɔ so ma drum, cylinder, tapered ne table-lamp shade designs afoforo. Nnuru a ɛyɛ fitaa te sɛ nufusu anaa ntama a wɔde ayɛ ntama betumi aboa ma wɔayɛ hann a ɛyɛ mmerɛw wɔ baabi a atwa yɛn ho ahyia no.
Ebia fam-kanea sunsuma akɛse bɛhwehwɛ sɛ wɔyɛ panel a ɛyɛ den kɛse na ama wɔakura ne nsusuwii mu bere a wɔda so ara ma kwan ma wotumi yɛ nsakrae a ɛfata ma wɔboaboa ano wɔ kanea no ntama ho no.
Pendant kanea betumi de PVC panels a ɛyɛ translucent, kɔla, wɔatintim anaa ntama akata so adi dwuma de ayɛ nneɛma a wɔde siesie fie ama atrae ne aguadidan mu.
Ahɔhodan, adidibea ne ahɔhoyɛ adwuma taa hwehwɛ sɛ kanea no kɔla a ɛkɔ so daa, sɛnea ɛte wɔ soro ne hann a ɛba wɔ nneɛma pii mu. Enti batch-to-batch visual consistency bɛyɛ adetɔ ahwehwɛde a ɛho hia.
PVC panels a wɔatintim no tumi boa branded kanea a wɔde kyerɛ, aguadidan mu nneɛma, ɔyɛkyerɛ nneɛma ne afɛfɛde a wɔde hyɛ nkurɔfo nkuran.
PVC diffuser anaa shade panels nso betumi asusuw ho ama aguadi anaa mfiridwuma kanea nhyiam ahorow a wɔapaw a wɔagye ade no hyew, ogyaframa nneyɛe, nnuru a ɛda adi ne mfiri a wɔhwehwɛ no atom ama fixture pɔtee no.
| Feature | PVC Kanea Ntama Krataa | General Clear PVC |
|---|---|---|
| Botae a Wɔde Hwɛ Aniwa so | Hann fibea no trɛw ne nea wɔde hwɛ so | Wotumi hu tẽẽ denam krataa no so |
| Sɛnea Wɔtaa Yɛ | Translucent, nufusu fitaa, matte, frosted anaasɛ textured | Ɛyɛ nea ɛda adi na ɛhyerɛn |
| Bulb a Wohu | Wɔtew so gyina opacity ne diffusion so | Mpɛn pii no, wotumi hu |
| Dwumadi a Wɔtaa De Di Dwuma | Kanea a wɔde kata so ne kanea a wɔde siesie fie | Displays, packaging, fabrication ne ahobammɔ panels |
PVC nyɛ plastic nko ara na wɔde yɛ kanea nneɛma. Nneɛma a eye sen biara no gyina optical adwumayɛ, forming ahwehwɛde, ɔhyew, hwɛbea ne production ka.
| Nneɛma | a Wɔde Yɛ Ahoɔden a Wɔtaa | Paw Ho Nsusuwii |
|---|---|---|
| PVC | Nsusuwii a ɛyɛ mmerɛw, kɔla, tintim, lamination ne mfaso kɛse a wɔyɛ | Si adwumayɛ hyew ne ogyaframa ho nkyerɛkyerɛmu a wɔhwehwɛ no so dua |
| Acrylic / PMMA | Rigid optical panels a ɛwɔ diffuser ne decorative grades pii | Ɛsono stiffness ne forming suban fi thin PVC |
| PET / PETG | Mfaso wɔ so ma kanea afã horow a wɔapaw a wɔahyehyɛ, a ɛda adi anaasɛ wɔde asiesie | Ɛsɛ sɛ wɔsɔ grade-specific forming ne optical properties hwɛ |
| PP | Ɛyɛ hare na ɛyɛ mmerɛw ma sunsuma a ɛnyɛ den a wɔapaw | Ɛsɛ sɛ wɔhwɛ sɛ tintim, stiffness ne ɔhyew a wɔhwehwɛ no yɛ nokware |
Fi ase denam hwɛ a wobɛkyerɛ sɛ ebia wɔde panel no bedi dwuma wɔ pon so kanea, fam kanea, pendant kanea, ɔfasu so nneɛma, ahɔhodan kanea anaasɛ amanne kwan so asiesie nhyiam mu.
Kyerɛ LED su, wattage, adwumayɛ hyew ne kwan a ɛda krataa no ntam. Saa parameters yi boa ma wohu sɛ PVC grade no fata ma fixture a wɔahyɛ da ayɛ no anaa.
Si gyinae sɛ ebia ɛsɛ sɛ kanea no ma hann yɛ kɛse, de bɔlɔb no sie denneennen, ɛma hann a ɛyɛ mmerɛw a ɛwɔ baabiara ba anaasɛ ɛma ɛyɛ fɛ a ɛyɛ nkyerɛwee.
Fa kanea no ntwemu, ne sorokɔ, ne nsusuwii ne ne frame nhyehyɛe ma. Saa nneɛma yi na ɛkyerɛ sɛ ebia krataa a ɛyɛ tratraa a ɛyɛ mmerɛw a ɛyɛ mmerɛw anaasɛ panel a ɛyɛ den kɛse fata kɛse.
Matte, frosted, glossy ne textured surfaces ma ɛsono aniwa ne hann nsunsuanso. Ɛsɛ sɛ wɔhwehwɛ honam fam nhwɛsode bi mu ansa na wɔawie ahyɛde kɛse bi.
Ka kyerɛ nea ɔde nneɛma ma no sɛ ebia wobegyaw panel no hɔ a ɛda hɔ kwa, atintim, wɔde ntama adura ho, wɔde ntama akata so anaasɛ wɔde ade a wɔde nkata so bɛma.
Sɛ kanea a wɔawie no hwehwɛ sɛ wɔde ogya a ɛmma ogya ntumi nhyew, anyinam ahoɔden, nnuru anaa nneɛma a atwa yɛn ho ahyia ho nkyerɛkyerɛmu pɔtee bi di dwuma a, fa botae a wɔhwehwɛ no ma bere a worepaw nneɛma no.
Ɛsɛ sɛ wɔde LED ankasa, kanea frame, ntama ne dan-kanea tebea na ɛyɛ pene a etwa to efisɛ PVC nhwɛsode a enni hann ntumi nkyerɛ diffusion nkɛntɛnso a wɔawie no koraa.
Nneɛma a ɛkɔ so daa ho hia titiriw bere a kanea nhyehyɛe biako de kanea a ɛne no hyia ɔhaha anaa mpempem pii di dwuma no. Enti ɛsɛ sɛ quality control kata honam fam krataa no su ne sɛnea ɛte wɔ hann ase nyinaa so.
Thickness a ɛyɛ pɛpɛɛpɛ
Krataa anaa nhoma mmobɔwee trɛw
Kɔla ne fitaa a ɛyɛ pɛpɛɛpɛ
Opacity ne translucency a ɛyɛ mmerɛw
Hann a ɛtrɛw wɔ reference hann fibea no ase
Surface scratches, nsensanee ne efĩ
Flatness ne curl a ɛyɛ mmerɛw
Stiffness ne suban a ɛma obi kotow
Printing adhesion wɔ baabi a ɛfata
Adhesive coating uniformity wɔ baabi a ɛfata
Lamination anim ne ade a wɔapene so a wɔde kata so
Dwumadi: pon so kanea, fam kanea, pendant, ɔfasu kanea, ahɔhodan kanea anaa fixture foforo.
Thickness: mprempren thickness anaasɛ stiffness a wɔhwehwɛ.
Panel kɛse: krataa no nsusuwii, panel a wɔatwa anaa roll trɛw.
Kɔla: fitaa, nufusu fitaa, translucent anaa amanne kɔla.
Optical ahwehwɛde: wɔpɛ transparency, opacity, diffusion anaa nhwɛsode nkyerɛkyerɛmu.
Ɔfa so wie: matte, frosted, glossy, smooth anaasɛ embossed.
Hann fibea: LED su, wattage ne ɔhyew a wɔhwɛ kwan sɛ wɔde yɛ adwuma.
Adansi: bare PVC , ntama laminated, wallpaper laminated, tintim anaasɛ ne ho a wɔde bata ho.
Ntama anaa nea wɔde kata so: fa nhwɛsode bi mena bere a ɛsɛ sɛ wɔsɔ sɛnea adhesive hyia no hwɛ.
Printing: screen printing, UV printing anaa adeyɛ foforo a wɔhwehwɛ.
Ahobanbɔ ho nkyerɛkyerɛmu: fa ogya a ɛmma ogya ntumi nhyew anaasɛ nea wodi so botae biara a ɛho hia ma.
Dodow: nhwɛso dodow, nea edi kan a wɔkra ne aguadi dodow a wɔahyɛ ho nkɔm.
Nneɛma a wɔde kyekyere: krataa, nhoma mmobɔwee, pallet anaa adwuma pɔtee bi a wɔde kɔ amannɔne.
Kanea ayɛfo betumi de panel dimensions a wɔawie, lampshade mfonini anaasɛ roll ahwehwɛde ama sɛnea ɛbɛyɛ a wobetumi aka nneɛma no ho nkyerɛkyerɛmu atwa adeyɛ ankasa no ho ahyia.
Wobetumi asusuw nnwuma ho sɛnea wɔhwehwɛ fitaa, opacity, translucency, matte hwɛbea, texture ne afɛfɛde afoforo ahwehwɛde.
Adetɔfoɔ bɛtumi de wɔn tintim kwan, ntama, wallpaper anaa afɛfɛdeɛ a wɔde kata so ama sɛdeɛ ɛbɛyɛ a wɔbɛtumi ahwɛ sɛdeɛ ɛne ne ho hyia ansa na wɔayɛ aguadi.
Wɔ kanea nneɛma a ɛho hia kɛse wɔ hwɛbea ho no, ɛsɛ sɛ wɔsɔ honam fam nhwɛso ahorow hwɛ sɛ ebia kɔla a ɛhyerɛn, ɛtrɛw, ɛyɛ opacity, stiffness ne nhyiam adwumayɛ ansa na wɔasi nneɛma a ɛdɔɔso so dua.
PVC kanea krataa yɛ ade a ɛyɛ den anaa ɛyɛ den fã bi PVC a wɔde ma nhyehyɛe mu mmoa ne hann a ɛhwɛ so wɔ kanea ntam. Wobetumi de ama a ɛyɛ translucent, nufusu fitaa, matte, frosted, textured anaa nneɛma afoforo a wɔde siesie.
Transparent PVC ma kwan ma wotumi hu ade pefee kakra denam nneɛma no so. Translucent lampshade PVC de hann kɔ nanso ɛbɔ pete ma enti nneɛma ne bɔlɔb a ɛwɔ panel no akyi no ntumi nhu pefee.
Mpɛn pii no, nufusu fitaa, awɔw ne nea ɛtrɛw kɛse no ma hann a ɛyɛ mmerɛw a emu yɛ den sen nea ɛda adi kɛse PVC . Ɛsɛ sɛ wɔde kanea ankasa ne akyi kataso no sɔ sɛnea ɛbɛyɛ a etwa to no hwɛ.
Ne kɛse gyina kanea no ntwemu, ne sorokɔ, ne stiffness a wɔhwehwɛ, bending radius, frame design ne sɛ ebia wɔde ntama anaa ade foforo a wɔde siesie PVC no bɛkata so.
PVC kanea a wɔde yɛ kanea no betumi adi dwuma wɔ LED kanea nhyehyɛe a ɛfata mu, nanso ɛsɛ sɛ adetɔfo si LED wattage, mframa, kwan a ɛda hann fibea no ntam ne ɔhyew a ɛsen biara a wɔde yɛ adwuma wɔ fixture no mu so dua.
Hann fibea ahorow a ɛyɛ hyew kɛse no hwehwɛ sɛ wɔhwehwɛ mu bio. Ɛnsɛ sɛ wɔpene adeɛ no so kɔsi sɛ wɔbɛsi fixture temperature ankasa, bulb wattage, spacing ne ahobanbɔ ahwehwɛdeɛ a ɛfa ho no so dua.
Ogya adwumayɛ gyina PVC nhyehyɛe pɔtee ne ne kɛse so. Sɛ adwuma bi hwehwɛ sɛ wɔkyekyɛ ogya a ɛmma ogya ntumi nhyew mu pɔtee bi a, fa gyinapɛn pɔtee no ma sɛnea ɛbɛyɛ a wobetumi asusuw abasobɔde ne nkrataa a ɛfata ho.
Aane. PVC wobetumi de adi dwuma sɛ akyigyina ama ntama kanea a wɔde yɛ kanea. Ɛsɛ sɛ wɔde ntama ankasa no sɔ ade a wɔde nkata so no hwɛ de si so dua sɛ ahoɔden a ɛkyekyere, sɛnea ɛte, ɔhyew a ɛko tia ne bere tenten a ɛne ne ho hyia.
Wobetumi ayɛ wallpaper ne krataa a wɔde siesie nneɛma a ɛfata no laminated akɔ PVC akyi. Sɔ adhesive, krataa dimensional stability ne hann hwɛbea hwɛ ansa na wɔayɛ.
Wobetumi de tintim nhyehyɛe a ɛne no hyia atintim PVC soro a wɔapaw. Ɛsɛ sɛ ɛfata sɛ wɔsiesie asase ani, ink a wɔpaw, tebea a wɔde sa yare ne nea wɔde bata ho no fata wɔ ade a wɔahyɛ da ayɛ no so.
Wobetumi asusuw adansi a wɔde ntama ayɛ ho hwɛ sɛ ebia wɔbɛyɛ nnwuma a ɛfata. Ɛsɛ sɛ adetɔfoɔ de ntama, krataa anaa bonding surface foforɔ no ka adwumayɛ tebea a wɔhwɛ kwan ho ma.
Matte, frosted ne textured surfaces a ɛfata betumi aboa ma wɔatew direct reflections a emu yɛ den so sɛ wɔde toto glossy clear surface ho a. Sɛnea glare no yɛ adwuma ankasa no gyina kanea no nhyehyɛe a edi mũ so.
Wobetumi aka kɔla ahorow a wɔsakra no ho asɛm ama nneɛma a wɔyɛ no dodow a ɛfata. Ɛsɛ sɛ adetɔfoɔ de honam fam nkyerɛkyerɛmu, kɔla botaeɛ anaa nhwɛsoɔ a ɛhyerɛn ma ɛfiri sɛ kɔla a wɔsusu sɛ ɛwɔ hɔ no tumi sesa berɛ a wɔasɔ kanea no.
Aane. Wɔkamfo nhwɛsode sɔhwɛ kyerɛ denneennen efisɛ wontumi nsusuw sɛnea ɛyɛ den, ɛtrɛw, ɛnyɛ hann, kɔla a hann wom, ntama a ɛbata ho ne ɔhyew adwumayɛ ho yiye mfi mfonini nkutoo mu.
Ɛnyɛ PVC resin no nko ara na ɛkyerɛkyerɛ kanea ntama panel a ɛyɛ papa mu. Nea efi mu ba awie no gyina nkitahodi a ɛda krataa no mu duru, ne stiffness, opacity, diffusion, surface finish, ntama anaa tintim, hann-fibea a ɛba ne adwumayɛ hyew ntam so.
Wɔ kanea ayɛfo ne OEM adetɔfo fam no, ɔkwan a wotumi de ho to so sen biara ne sɛ wɔde kanea no nhyehyɛe, hann a wɔpɛ, PVC nsusuwii, hann-fibea nkyerɛkyerɛmu ne ɔkwan a wɔfa so dannan no bɛma ansa na wɔapaw krataa a etwa to no.
Wallis betumi asusuw PVC krataa a wɔahyɛ da ayɛ ho nhwehwɛmu ama kanea a wɔde siesie nneɛma a egyina kɛse, kɔla, opacity, soro, tintim, lamination ne production format a wɔhwehwɛ so.
