More Language

Karti minɛn Dilanbaga ɲɛmɔgɔ Kabini san 2010

WALLIS PLASTIC A bɛ fura kelen di Karti minɛn s suguya bɛɛ ma, i n’a fɔ PVC karti, PETG karti, PC karti, ani a ɲɔgɔnnaw, an bɛ kiliyan kelen-kelen bɛɛ ka ɲinini kɛrɛnkɛrɛnnenw ɲɛnabɔ ani ka fɛnw bɛrɛbɛn walasa ka na ni karti ye min b’u magow ɲɛ.

Wallis-- Karti minɛn dilanko ɲɛmɔgɔba

 Ka ɲɛsin Karti minɛn Jagokɛlaw ma

An ye baara kɛ ni jagokɛla suguya caman ye k’u hakilinaw ta k’a ta kɔnɔmaya la ka taa a bila u sago ka karti fɛnw ɲɛnabɔli la. An bɛ taama taama n’aw ye walasa k’a jira ko an b’aw dɛmɛ k’aw sago ɲɛfɔ ka ɲɛ ani k’aw ka marka ka kartifɛnw ɲɛnabɔcogo dafalenw faamuya.

 Ka ɲɛsin Karti minɛn Dilanbaga & Karti minɛn Dilanbagaw ma

An ka bi sɛnɛyɔrɔ min bɛ so kɔnɔ, o b’a to an bɛ se ka sugandi ɲumanw di walasa ka aw ka kiliyan laɲinitaw diyabɔ. I n’a fɔ fɛn dilannikɛla walima fɛn dilanbaga, i bɛ se ka da a la ko an ka fɛn dilanni taabolo nɔgɔmanw bɛ yan walasa ka fɛn ɲumanw di i ma sugu la.

 Ka ɲɛsin Karti minɛn Jagokɛla ma

Komin an ye kartifɛnw dilanko tɔnw dɔ ye minnu ka baarakɛminɛnw ka bon kosɛbɛ, an bɛ fɛn ɲumanw dilan ni musaka dɔgɔman ye kosɛbɛ. O b’a to an bɛ baara kɛ ni aw ye walasa aw ka se fana ka sɔngɔba lase aw ka kiliyanw ma.

suguya wɛrɛw . Karti minɛn

Karti dɔw, kɛrɛnkɛrɛnnenya la tulonkɛ kartiw ni ID karti minnu ka ɲi kosɛbɛ, olu dilannen don ni plastiki ye. Plastiki kartiw bɛ mɛn, u tɛ se ka sɛgɛn, wa tuma caman na, u si bɛ mɛn ka tɛmɛ papiye kartiw kan.


PVC karti fɛnw  bɛ kɛ ka caya ka karti suguya caman dilan, i n’a fɔ kartiw, ID kartiw, tɔndenw ka kartiw, pvc kartiw ani fɛn wɛrɛw. PVC bɛ nafa caman di, i n’a fɔ a bɛ se ka muɲu, a bɛ se ka fɛn caman sɛgɛsɛgɛ, ani a tɛ se ka ji ni sɛgɛn.

 

PETG kariti minɛn  ye fɛn wɛrɛ ye min bɛ kɛ ka caya karti dilanni na, kɛrɛnkɛrɛnnenya la baarakɛcogo la, fɛn min ka gɛlɛn ani min bɛ kɛnɛya ka tɛmɛ, o b’a fɛ.

 

Polikarbonati ( PC ) kariti minɛn  fana bɛ se ka kɛ kariti dilanni na, kɛrɛnkɛrɛnnenya la baarakɛyɔrɔw la, yɔrɔ minnu na, u muɲuli ka bon ani u ka se ka ɲɔgɔn gosi, o nafa ka bon kosɛbɛ.

 

PVC Film overlay ye PVC (Polyvinyl Chloride) sɔgɔlen finman ye min bɛ kɛ karti sanfɛ walasa k’a muɲuli bonya, ka a tangalan di, ani ka se ka lakanafɛn wɛrɛw fara a kan. PVC Film overlay s bɛ kɛ ka caya danyɔrɔsɛbɛnw dilanni na, dondaw kartiw, ani karti suguya wɛrɛw dilanni na walasa ka dɔ fara u si hakɛ kan ani ka dɔ fara u ka sɛgɛnbaliya kan.

 

PC (polycarbonate) core sheet bɛ tali kɛ karti basigilen walima substrat dɔ la min dilannen don ni polikarbonati fɛn ye min bɛ kɛ ka kartiw dilan minnu bɛ mɛn ani minnu bɛ lakana. Polikarbonati bɛ sugandi karti kɔnɔna na ni a muɲuli ka bon, ni a bɛ se ka sɔgɔsɔgɔ, ani ni lakanafɛnw ka kan ka kɛ. Karti minnu kɔnɔna bɛ PC olu bɛ kɛ ka caya baarakɛminɛnw na i n’a fɔ dantigɛli kartiw, don kartiw, ani karti hakilitigiw.

Wallis ko la:I ka Karti minɛn Furakɛla

Aw bɛ se ka taa Wallis izini na Sinuwa jamana na, Top Brand Karti minɛn Supplier.
Shanghai Wallis Technology Co., Ltd. ye baarakɛla ŋana ye ni karti fɛnw ye ni san 10 ni kɔ dɔnniya ye walasa ka karti fɛnw di aw ma Advanced and Competitive card material,card products with professional service .

Ka ɲɛsin fɛnw bɛɛ ma ,an bɛ se ka Customized di . I n’a fɔ an bɛ CNC masin, Laser masin ,Diamond Poliser ,Silk Print Workshop , UV Printer , walasa an ka se ka dilan i n’a fɔ i ka ɲinini.

Karti minɛn suguya bɛɛ.

  • <div style='text-align: center;'><strong><span style='font-size:20px;'>Ji tɛ don a la PVC</span></strong></div>
  • <div style='text-align: center;'><span style='font-size:20px;'><strong>Non Laminant PVC fɛrɛ</strong></span></div>
  • <div style='text-align: center;'><strong><span style='font-size:20px;'>RIFD PVC PET PETG PC Sɛbɛn</span></strong></div>
  • <div style='text-align: center;'><strong><span style='font-size:20px;'>Eco Friendly PETG fɛrɛ</span></strong></div>
  • <div style='text-align: center;'><strong><span style='font-size:20px;'>Film overlay enduit Ni Magnétique Stripe ye</span></strong></div>
  • <div style='text-align: center;'><span style='font-size:20px;'><strong>Carte en bois de bambou</strong></span></div>
PVC kariti minɛn bɛ kɛ ni kuloridi Polivinili ye, o ye polimɛri plastiki dilannen ye min tɔgɔ bɔra a ka se ka muɲu ani a ka se ka ladamu. O dacogo bɛ PVC resin ni faralifɛnw fara ɲɔgɔn kan i n’a fɔ plastiki, sabatili ani pigment. O ɲagami ɲɔgɔn tɛ min na, o bɛ na ni fɛn ye min tɛ barika dɔrɔn ye, nka a bɛ se ka ladilan fana a kulɛri, a kɛcogo ani a bonya siratigɛ la.

Poliyetilɛni Tereftalati Glikɔli kariti minɛn, n’a bɛ fɔ a ma kosɛbɛ ko PETG kariti minɛn, o bɛ waso ni jogo kɛrɛnkɛrɛnnenw ye minnu b’a kɛ fɛn ye min bɛ bɔ kɛnɛ kan izini suguya caman na. A ka jɛya danfaralen, a ka se ka fɛnw gosi, ani a ka kemikaliya muɲuli bɛ PETG kɛ sugandili sanfɛla ye karti dilanni na.
PVC Karti minɛn nafaw

1. Muɲuli
PVC karti minɛn bɛ waso ni muɲuli danma ye, o b’a to kartiw bɛ to u cogo la hali ni gɛlɛyaw bɛ u la. O muɲuli bɛ kɛ sababu ye ka mɔgɔ tɔgɔladonni kartiw si jan, o bɛ dɔ bɔ a la ka to ka fɛn wɛrɛw bila u nɔ na.

2. Ladamuni sugandiliw
PVC karti fɛnw ka baarakɛcogo caman bɛ sira di ladamuni caman ma. K’a ta kulɛri kɛrɛnkɛrɛnnenw sugandili la ka se dilancogo gɛlɛnw donli ma, jɛkuluw bɛ se ka PVC kartiw labɛn ka kɛɲɛ n’u ka taamasiyɛn ye.

3. Lakanali fɛɛrɛw
PVC kartiw bɛ se ka lakana fɛɛrɛ kɔrɔw fara ɲɔgɔn kan, k’u bɛnnenya bonya baarakɛcogo kɔrɔw la. Olografu Film overlay s, UV sɛbɛnni, ani mikro-sɛbɛnni ye lakana fɛɛrɛw misali damadɔw dɔrɔn ye minnu bɛ se ka don a kɔnɔ cogo la min tɛ fɛn tiɲɛ.
 
 
Sustainability Matters: PETG 's Eco-Friendly Edge

Recyclability
Waati min na sabatili de ka bon kosɛbɛ, PETG jɔlen bɛ sanfɛ i n'a fɔ eco-friendly option. A ka se ka segin a cogo kɔrɔ la, o tɛ dan sigida tiɲɛni dɔrɔn ma, nka a bɛ bɛn fana ni jagokɛcogo sabatilenw ɲinini ye min bɛ ka bonya.

Karɔbɔli sennabɔli dɔgɔyali
PETG sugandili i ka kartiw kama, o tɛ jagokɛcogo hakilitigi dɔrɔn ye; o ye cɛsiri ye walasa ka dɔ bɔ i ka gazi bɔlenw na. PETG dilanni bɛ nafolo dɔgɔya, o b’a to a bɛ kɛ sugandili ye min bɛ sigida lakana kosɛbɛ ni i y’a suma ni laadalafɛnw ye.
 
 
 
Fɛn minnu bɛ kɛ ni jogoɲumanya ye, olu kunba

Ni PC kartiw kofɔra, fɛnw sugandili tɛ fɛɛrɛko dɔrɔn ye; o ye ko latigɛlen ye min bɛ nɔ bila ɛntɛrinɛti minɛnw baara bɛɛ lajɛlen na. Fɛn ɲumanw, minnu bɛ dɔn ni u muɲuli ye, u bɛ se ka fɛnw ta, ani u bɛ se ka funteni sabati, olu de ye PC kartiw jusigilan ye minnu bɛ se ka da u kan. O fɛnw b’a to minɛnw bɛ baara kɛ cogo la min tɛ fɛn tiɲɛ, o b’a to u bɛ baara kɛ ka ɲɛ ani ka mɛn.
 
 

Wallis Karti minɛn  Fɛn minnu bɛ kɛ

WALLIS PLASTIC A bɛ fura kelen di Karti minɛn s suguya bɛɛ ma, an bɛ kiliyan kelen-kelen bɛɛ ka ɲinini kɛrɛnkɛrɛnnenw ɲɛnabɔ ani ka fɛnw bɛrɛbɛn walasa ka na ni karti ye min b’u magow ɲɛ.

Waleyali

Poker Karti
Karti Blank Blanc
Karti Laser ye
Puce Karti
  • Ni Chip Card ye
  • Poker Karti
  • Karti Blank Blanc
  • Karti Laser ye
  • Karti dafalen
  • 3
  • 1
  • 2
Sɔngɔ bɛnnen Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.
  • 3
  • 1
  • 2
Sɔngɔ bɛnnen Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.
  • 3
  • 1
  • 2
Sɔngɔ bɛnnen Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.

Mun na a bɛ Wallis Plastic sugandi. ?

100% Npogotiginin Materiel

100% Npogotiginin Materiel

Wallis PLASTIC la, an bɛ baara kɛ ni 100% npogotigininw ye minnu ka ɲi kosɛbɛ ka bɔ yɔrɔw la minnu tɔgɔ ka di, ka fara faralifɛnw kan minnu bɛ na ni u ye jamana wɛrɛw la, walasa ka karti fɛnw dilan.

Bonya ni a janya tigitigi

Bonya ni a janya tigitigi

Ni sɛnɛfɛnw dilanni sira kɔrɔlenw ye ani fɛnɲɛnamafagalan ɲumanw. O b’a to an ka plastiki min ka kɛnɛya hakɛ ka bon ani a ka muɲuli ka bon ni i y’a suma ni tɔw ye sugu la.

pvc4 ye

Seko ni dɔnko minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

Ni kiliyanw ka dilancogo, u bonya walima u kulɛri kɛrɛnkɛrɛnnenw bɛ u fɛ, an bɛ se k’an ka fɛn dilanni kɛcogo sɛmɛntiya walasa k’u magow ɲɛ.

 

Kunnafoni-di-sira ɲumanba

Kunnafoni-di-sira ɲumanba

An bɛ nafa don kumaɲɔgɔnya ni jɛkafɔ la ni an ka kiliyanw ye. An bɛ baarakɛɲɔgɔnya barikama sigi senkan ani ka baarakɛcogo kɛrɛnkɛrɛnnen di kiliyanw ma.

16892259298 97(1) Bamako, Mali.

100% Sɛgɛsɛgɛli

Wallis PLASTIC la, an bɛ jogoɲini 100% kɛ sɛnɛ bannen kɔfɛ, ka kɔnɔna sɛgɛsɛgɛli rapɔɔri di fɛn camanba kulu kelen-kelen bɛɛ ma.

sɛnɛfɛn_ 16876745861 44

Seereyaw Seti dafalen

An ka fɛn dilannenw tɛmɛna SGS sɛgɛsɛgɛli la, wa u bɛ REACH ani ROHS sariyaw labato.An bɛ an ka izini laboratuwari kulu kelen-kelen bɛɛ sɛgɛsɛgɛ walasa k’a dɔn ko u bɛ o sariyaw dafa.

kemikaliya ni farikolo cogoyaw . Karti minɛn ka

Wallis Karti minɛn

   Fɛn Tɔgɔ

 Karti minɛn
   Mariki Wallis ye baara kɛ
   Suguya Karti minɛn

   Dipilomu

 REACH , ROHS, ISO , GRS
   Jamana min Bɔra yen Sinuwa jamana
   Hakɛ 1,36g/cm3 ye
   Tensile fanga (ASTM D638) . 57Mpa ye
   Izod Impact Notched(ASTM D256) Bamako, Mali. 39J/M ye
   Flɛri fanga(ASTM D790) . 83Mpa ye
  Yeelen Tɛmɛsira hakɛ 89% ye .
  Deflection Température(ASTM D648(@0.46Mpa)) Bamako, Mali. 68°C ye
  Softening Temperature(ASTM D1525(@1kg doni)) 80°C ye
  Glass Tansition Temp(DSC Fɛɛrɛ °C) . 78°C ye

  Ɲɛ

 Kulɛri jɛlen, Fini, Dugukolonɔn, Bilen, Jɛman, Kulɛri min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye
  Suguya Fanga ka bon, Impact ka bon, super transparence

  Waleyali

 Thermoforming, Die Cutting, Printing, Boxes foli, Display, Décoration
SGS Kɔlɔsili
 
SGS, o ye jamana caman ka baarakɛda ye min sigiyɔrɔba bɛ Suwisi jamana na, min ka baara ɲɛsinnen bɛ sɛgɛsɛgɛli, sɛgɛsɛgɛli, sɛgɛsɛgɛli ani seereyaw baara ma. SGS Detection bɛ se ka kɛ kɛrɛnkɛrɛnnenya la u ka sekow ye ka fɛn suguya caman, nɔgɔw, walima fɛn suguya caman dɔn fɛn dilannenw, fɛnw walima sigidaw la ni sɛgɛsɛgɛli fɛɛrɛw ni fɛɛrɛ kɔrɔw ye. O bɛ se ka kɛ izini caman ye i n’a fɔ dumuni, furakɛli, kemikɛli, sigida, ani fɛn wɛrɛw.
PVC Karti minɛn ani Film overlay enduit Sɛgɛsɛgɛli Raporo
  • 0
     
    485*295*0,1mm ye
  • 0
     
    485*295*0,15mm ye
  • 0
     
    485*295*0,32mm ye
  • 0
     
    485*295*0,76mm ye

Faamuyali PVC Karti minɛn

 

Mun bɛ PVC Bɔ ɲɔgɔn na?

Kulori polivinili, n’a bɛ fɔ a ma kosɛbɛ ko PVC , o bɛ bɔ kɛnɛ kan i n’a fɔ ɲɛfɛla kartiw dilanni siratigɛ la. A kemikaliya ni a farikolo cogoya b’a kɛ sugandili ye min bɛ bɔ kɛnɛ kan baara caman na. PVC kartiw bɛ waso u ka muɲuli danmadɔ la, u tɛ se ka sɛgɛn ani u bɛ se ka fɛn caman kɛ minnu bɛ mago suguya caman ɲɛ.
 

Muɲuli min tɛ se ka suma ni tɔw ye

PVC kariti minɛnw ka fɛn ɲɛnama dɔ ye a muɲuli ye min ɲɔgɔn tɛ. PVC kartiw bɛ waati kɔrɔbɔli muɲu, k’u ka dafalenya mara hali ni ko gɛlɛnw kɛra. O muɲuli in b’a to kartiw bɛ to cogo jɛlen na, o b’a to u ka ɲi kosɛbɛ baara kama waati jan kɔnɔ k’a sɔrɔ u ma tiɲɛni kɛ u jogo la.
 
pvc20 ye
 

A ka baara kɛcogo caman Karti PVC s


Ka se ka ladamu sɛbɛnnikɛlan suguya caman na

PVC karti minɛnw ka baarakɛcogo caman bɛ taa fo a bɛ se ka kɛ ni sɛbɛnnikɛcogo suguya caman ye. I mana laadalata offset sɛbɛnni sugandi, nizɛri sɛbɛnni, walima thermal printing, PVC kartiw bɛ o fɛɛrɛw ladon cogo la min tɛ fɛn tiɲɛ. O fɛn caman sɛgɛsɛgɛli bɛ sira di dilancogo gɛlɛnw ma, kulɛri ɲɛnamaw, ani kunnafoni tigitigiw, ka baarakɛlaw ka ɲɛnajɛko diyabɔcogo suguya caman dafa.
 

Customisation (daɲɛw labɛncogo) min bɛ dancɛw kɔ

PVC kartiw bɛ da wuli dan tɛ ladamuni seko la. K’a ta baarakɛlaw ka ID kartiw la ka se donko kɔlɔsili kartiw ma, PVC fɛnw bɛ baarakɛcogo caman ɲɛnabɔ ni nɔgɔya ye. Se min bɛ mɔgɔ ye ka kunnafoni gɛlɛnw, logow, ani taamasiyɛn kɛrɛnkɛrɛnnenw don a kɔnɔ, o bɛ PVC kɛ taa-ka-segin sugandili ye jagokɛlaw bolo minnu laɲini ye ka hakilina banbali dɔ dilan.
 

 

PET nafa : Poliyetilɛni Terɛftalati

 
Poliyetilɛni Terɛftalati, n’a bɛ fɔ a ma kosɛbɛ ko PET , o ye polimɛri ye min bɛ kɛ ni funteni ye, min tɔgɔ bɔra a ka jɛya, a fanga ani a ka baarakɛcogo caman na. Karti dilanni siratigɛ la, PET ye yɔrɔ dɔ ja a yɛrɛ ye, ka fura barikama di baarakɛcogo caman ma.


Fanga min bɛ kɛnɛyako la

PET kariti minɛnw ɲɛfɔcogo dɔ ye a jɛlenya danma ye. PET kartiw bɛ kɛnɛya di min tɛ ɲɛnajɛko ɲɛnajɛ dɔrɔn bonya nka a bɛ sira di fana dilancogo suguya caman ma. Substrate jɛlen bɛ kɛ kanpaɲi ye kulɛri ɲɛnamaw ni kunnafoni gɛlɛnw kama, o bɛ PET kartiw kɛ ɲɛnajɛ ye.
 
PETG 12. Bamako, Mali
 

Muɲuli ni muɲuli min ɲɔgɔn tɛ yen


PET ka Resistance to Wear and Tear
PET karti minɛn bɛ waso ni muɲuli kabakoma ye, a jɔlen bɛ ka se ka don o don baarakɛcogo gɛlɛnw kɛlɛ. A kɛra ni u bɛ kɛ tuma caman na walima u kɛra sigida degunw ye wo, PET kartiw bɛ u jɔcogo dafalen mara, ka u si janya sabati k’a sɔrɔ u ma tiɲɛni kɛ u jogo la.

Ji-kɛlɛ-sɛnɛfɛnw
Kὲlɛ min bɛ Kɛ ni fɛnw ye, PET bɛ Bɔ kɛnɛ kan i n’a fɔ ɲɔgɔndanba sirannin. A ka se ka ji kɛlɛ cogo min na, o b’a kɛ sugandili ɲuman ye kartiw kama minnu bɛ se ka ji sɔrɔ. O kɛcogo in nafa ka bon kosɛbɛ baarakɛminɛnw na i n’a fɔ ID kartiw ani dondaw kɔlɔsili karti minnu bɛ muɲu wajibiya sigida koɲɛw ma.

 

Jateminɛ minnu bɛ kɛ ka ɲɛsin sigida laminiko ma

 

PET ka Lasegincogo
Ka sigida haminankow ɲɛnabɔ, PET b’a ka sigida lakanani fan jira lasegincogo fɛ. I n’a fɔ polimɛri thermoplastique, PET bɛ se ka segin ka kɛ fɛn wɛrɛ ye, ka dɛmɛ don sabatili cɛsiriw la ani ka sigida laminiko nɔ dɔgɔya min bɛ tali kɛ karti dilanni na.
 
 

 

Faamuyali PC Karti minɛn s

 
PC kartiw, walima karti sɛbɛnnenw, olu bɛ kɛ ɛntɛrinɛti minɛnw ɲɛnamaya ye, ka kumaɲɔgɔnya nɔgɔya yɔrɔw ni ɲɔgɔn cɛ. Fɛn minnu bɛ sugandi o kartiw dilanni na, olu jɔyɔrɔ ka bon u ka baarakɛcogo bɛɛ lajɛlen na. An bɛ fɛn kolomaw sɛgɛsɛgɛ kosɛbɛ minnu bɛ kɛ sababu ye ka PC kartiw ka ɲɛtaa sabati.

1. Ka baara kɛ ni fɛnw ye minnu ka ɲi kosɛbɛ
Substrate, walima PC karti basigilen fɛn, o de ye fɛn bɛɛ la belebele ye. An bɛ lafasali kɛ ka baara kɛ ni substrat ɲumanw ye minnu bɛ funteni sabatili ɲuman di ani ka kuran lakana. O b’a to PC karti bɛ se ka sigida cogoya caman muɲu k’a sɔrɔ a ma a baarakɛcogo tiɲɛ.

2. Embracing Advanced Conductor Materials
Conducteur sira minnu bɛ PC karti kan, olu nafa ka bon kosɛbɛ taamasiyɛnw cicogo ɲuman na. An bɛ sɔn ka fɛnw ta minnu bɛ taa ɲɛ, i n’a fɔ nɛgɛ ni aliminiyɔmu, walasa ka fɛnw tacogo ɲɛ ani ka taamasiyɛn bɔnɛ dɔgɔya. O bɛ na ni kunnafoniw cili teliya ye ani ka baarakɛcogo bɛɛ lajɛlen ɲɛ.
 
pc (10) ye.
 

 

PC Karti minɛn s ɲumanw sugandili i ka baarakɛminɛnw na I ka baarakɛminɛnw

 
ɲɛnabɔli fɛɛrɛw labɛnni mago kɛrɛnkɛrɛnnenw kama
Baarakɛcogo suguya caman ka ɲinini kɛrɛnkɛrɛnnenw faamuyali nafa ka bon kosɛbɛ PC karti minɛn ɲumanw sugandili la. A kɛra sanfɛla ye wo, a kɛra telefɔniko ye wo, a kɛra mɔgɔw ka ɛntɛrinɛti ye wo, an bɛ fɛɛrɛw di minnu bɛ bɛn izini kelen-kelen bɛɛ ka ɲinini kɛrɛnkɛrɛnnenw ma. An ka cɛsiri ka ɲɛsin fɛnw ma minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, o b’a to an ka cikɛlaw bɛ PC karti fɛnw sɔrɔ minnu labɛnna ka ɲɛ u ka baarakɛcogo kɛrɛnkɛrɛnnenw kama.

Siniko ɲɛnabɔli ni fɛn kuraw ye
Fɛɛrɛbɔ diɲɛ kɔnɔ min bɛ taa teliya la, kokuradonni de ye fɛn ye min bɛ se ka to ɲɛfɛ. An bɛ to ka fɛn tigɛlenw sɛgɛsɛgɛ ani k’u don an ka PC kartiw kɔnɔ, k’a lajɛ ko an ka cikɛlaw bɛ ni furaw ye minnu tɛ sisan dɔrɔn ye, nka minnu bɛ se ka kɛ siniko ye. Fɛnɲɛnɛmafagalan kɔrɔlenw, minnu bɛ bɔ ɲininiw ni yiriwalibaw la, olu bɛ ka kɛ an ka cɛsiri jɔnjɔn ye dɔɔnin dɔɔnin ka ɲɛsin ɲɛtaa ma.
 

Jɛkafɔ taabolo

Aw ye ɲɔgɔn sɔrɔ anw fɛ
形状结合, Bamako, Mali
形状结合备份, Bamako, Mali
  • <>
  • <strong><span style='font-size:26px;'>Linkedin ye</span></strong>
  • <strong><span style='font-size:26px;'>WhatsApp ka baara</span></strong>

Karti minɛn Ɲininkaliw

  • Yala PETG Film overlay s bɛ mɛn wa, wa u bɛ kartiw lakana ka ɲɛ wa?

    Ɔwɔ, PETG Film overlay s bɛ se ka kɛ fɛn caman ye, wa u bɛ se ka kɛ karti suguya caman kan. I mana viziti kartiw dilan, ID kartiw, tɔndenw ka kartiw, walima jago kartiw, PETG Film overlay s bɛ layɛrɛ lakanani ni polisilen di. U bɛ bɛn fana ni inkjet ni laser sɛbɛnnikɛlanw ye, o b’a to u bɛnnen don karti dilanni baara caman ma.

  • Yala PETG Film overlay s bɛ se ka kɛ karti suguya wɛrɛw kan wa?

    Ɔwɔ, PETG Film overlay s bɛ se ka kɛ fɛn caman ye, wa u bɛ se ka kɛ karti suguya caman kan. I mana viziti kartiw dilan, ID kartiw, tɔndenw ka kartiw, walima jago kartiw, PETG Film overlay s bɛ layɛrɛ lakanani ni polisilen di. U bɛ bɛn fana ni inkjet ni laser sɛbɛnnikɛlanw ye, o b’a to u bɛnnen don karti dilanni baara caman ma.

  • PETG Film overlay ye mun ye, ani a bɛ kɛ cogo di karti dilanni na?

    PETG Film overlay ye plastiki filimu jɛlen ye min bɛ kɛ kariti dilanni na walasa ka muɲuli ni cɛɲi sabati. A bɛ kɛ karti sɛbɛnnenw kan walasa k’u tanga sɛgɛn ni tiɲɛni ma ka sɔrɔ ka fini dɔ fara a kan min bɛ manamana, min bɛ kɛ ni baarakɛla ŋana ye. Nin Film overlay in dilannen don ni PETG (Polyethylene Terephthalate Glycol) ye, o ye polimɛri ye min ka ɲi kosɛbɛ, min bɛ dɔn a jɛlen n’a fanga fɛ.

    Kunnafoni jɔnjɔnw:

    1. PETG Film overlay ye plastiki filimu jɛlen ye.
    2. A bɛ karti muɲuli ni a yecogo ɲɛ.
    3. A dilannen don ni PETG , n’o ye thermoplastique barikama ye ani min jɛlen don.

  • PVC karti minɛn bɛ se ka kɛ min?

    1. PVC karti minɛnw bɛ kɛ ka ɲɛsin mɔgɔya kartiw ma, wari sarali kartiw, kantigiya ni sara kartiw, kado kartiw, ko kɛlenw ni tikiti kartiw, lotɛli kilisi kartiw, ani bolifɛnw kartiw.
    2. PVC kartiw bɛ muɲuli ni fɛn caman di walasa ka u minɛ tuma caman na ani ka u sɛgɛn.
    3. U bɛ se ka fɛɛrɛ suguya caman don u kɔnɔ, i n’a fɔ magɛnni sɛrɛkiliw, EMV puwɛntiw, RFID / NFC , ani barɔdi walima QR kode, ka da baarakɛcogo wajibiyalenw kan

  • Nafa jumɛnw bɛ sokɔnɔbaganw ka kartiw la?

    1. PET kartiw tɛ sigida lakana ani u bɛ se ka segin ka kɛ fɛn wɛrɛ ye.
    2. U bɛ mɛn kosɛbɛ, wa u tɛ se ka sɛgɛn.
    3. PET fɛnw bɛ kɛnɛya ɲuman di sɛbɛnni jɛlen ni ɲɛnama ma.
    4. PET kartiw bɛ se ka kɛlɛli barikama jira kemikɛlifɛnw, tuluw ani furajiw la.

  • PVC kartiw dilannen don ni mun ye?

    PVC kartiw, n’a bɛ fɔ fana ko polivinili kuloridi kartiw, olu bɛ dilan fɔlɔ ni plastiki suguya dɔ ye min bɛ wele ko polivinili kuloridi. PVC ye polimɛri sintetiki ye min bɛ kɛ ka caya, min lakodɔnnen don a ka muɲuli, a bɛ se ka wuli, ani a bɛ se ka ji ni kemikɛlifɛnw kɛlɛ. A bɛ kɛ ka caya baarakɛminɛn suguya caman na, i n’a fɔ ID kartiw, kartiw, tɔndenw ka kartiw ani don kartiw.

  • Karti minɛn bɛ san min ?

    WALLIS PLASTIC A bɛ fura kelen di Karti minɛn s suguya bɛɛ ma, an bɛ kiliyan kelen-kelen bɛɛ ka ɲinini kɛrɛnkɛrɛnnenw ɲɛnabɔ ani ka fɛnw bɛrɛbɛn walasa ka na ni karti ye min b’u magow ɲɛ.

Izini Ɲininkaliw

Aw ye aw ka Porozɛ daminɛ an fɛ

An ka Quotation ɲuman sirataama
Shanghai Wallis Technology Co., Ltd ye baarakɛla ŋana ye min bɛ ni izini 7 ye walasa ka Plastiki sɛbɛnw, Plastiki filimu, Karti Base Material, Karti suguya bɛɛ, ani Custom Fabrication Service di Plastiki fɛn dilannenw ma.

Fɛn minnu bɛ dilan

Lien teliyalenw

Ka wele
      feereli@wallis-plastic.com kan
   +86 13584305752 ye
  No.912 YeCheng sira, Jiading Industri yɔrɔ, Shanghai
© ƝƐNABƆLI ƝƐNABƆLI 2026 SHANGHAI WALLIS TECHNOLOGIE CO.,LTD. HAKƐLA BƐƐ BƐ SƆRƆ.