|
karti kɔnɔfɛnw
Wallis ye baara kɛ
| Kulɛri: | |
|---|---|
| Fɛn min bɛ kɛ: | |
| A kɛcogo: | |
| Hakɛ: . | |
Wallis kulɛri PVC sɛbɛn min bɛ ni fini jɛman ye , o ye karti substrat ye min bɛ se ka sɛbɛn, min dilannen don banki kartiw, wariko kartiw, ID kartiw, hakili kartiw, don kartiw, tɔndenw ka kartiw ani karti plastiki lamininen wɛrɛw kama. A bɛ PVC basigilen kulɛrilen dɔ fara ɲɔgɔn kan ni sɛbɛnnikɛlan finman kɔrɔsilen ye walasa dilanbagaw ka se ka ja yɔrɔ jɛlen sɔrɔ k’a sɔrɔ u bɛ karti kulɛri danfaralen dɔ mara.
O fɛn bɛ se ka kɛ ka kɛɲɛ ni basigi kulɛri ye, fini jɛman datugucogo, sɛbɛnfura janya, sɛbɛnfura hakɛ, a sanfɛla fini ani sɛbɛnni hakɛ. Walasa ka fɛn caman dilan ka da a kan, a hakɛ tigitigi ka kan ka sugandi ka kɛɲɛ ni sɛbɛnnikɛlan, enki sigicogo, finimugu sigicogo, lamini sɛrɛkili, puce walima antɛni dilanni ani karti sɛgɛsɛgɛli laban wajibiyalenw ye.
| Paramɛtiri | B2B Ɲɛfɔli |
|---|---|
| Minɛ | PVC karti sɛbɛn gɛlɛn min basigilen bɛ ni kulɛri ye ani a datugulen finman min bɛ se ka sɛbɛn |
| Base Kulɛriw | Kulɛri bilenman, bulu, wuluwulu, jɛman ani ladamu kulɛriw ka da kulɛri jiracogo dɔ kan min dagalen don |
| Datugulan | Printing layɛrɛ finman; coating coverage ani fan kelen walima fan fila cogoya ka kan ka dafa sɛgɛsɛgɛli waati |
| A ka bon kosɛbɛ | A bɛ kɛ ka kɛɲɛ ni sɛbɛnfura layɛrɛ ye, a kɔnɔna jɔcogo, a dacogo faralen ɲɔgɔn kan ani a laɲini fini-karti janya |
| Sheet Size (sɛbɛnni hakɛ). | Karti-sɔrɔ-sɛbɛnw cogoya jɔnjɔnw walima u hakɛ minnu bɛ kɛ ka kɛɲɛ ni sɛbɛnni ni punch kɛcogo ye |
| Printing Kalanso | Offset, silk screen walima UV sɛbɛnni hakɛ min sugandira ka kɛɲɛ ni tintin ni minɛnw ye; nizɛri walima enki dacogo kɛrɛnkɛrɛnnen bɛ dantigɛli danfaralen de wajibiya |
| Jiginni-kɔnɔ-baarakɛcogo | Sɛbɛnni, lamination hot, die cutting, punching, chip embedding, magnetic stripe integration ani karti personalisation |
| Aplikasi minnu bɛ kɛ | Banki kartiw, kartiw ni debit kartiw, ID kartiw, don kartiw, lotɛli kartiw, tɔndenw ka kartiw, kado kartiw ani smart cards customized |
| Misali la Sɔn | Kulɛri, finimugu, sɛbɛnni nɔrɔli, lamini ani karti dafalen baarakɛcogo ka kan ka sɔn sani u ka kɛ caman ye |
PVC sɛbɛn kulɛri finman ye karti fɛn ye min bɛ baara caman kɛ, min bɛ kɛ ni PVC dugumalan gɛlɛn kulɛrilen ye ani yɔrɔ finman ye min dilannen don walasa ka ja sɛbɛnnenw sɔrɔ. Basi kulɛrilen bɛ to ka ye yɔrɔ sugandilenw na walima karti da la, k’a sɔrɔ fini jɛman bɛ kɔkannafɛn dɔ dilan logow, jaw, sɛbɛnni ɲumanw, barɔdiw, lakanacogo misaliw ani marka kulɛriw kama.
Karti lamininen sigicogo la, a ka c’a la, sɛbɛnfura bɛ fara ɲɔgɔn kan ni dakunw ye minnu bɛ bɛn ɲɔgɔn ma ani, ni a mago bɛ a la, RFID inlay, contact-chip module yɔrɔ, magnetic stripe, signature panel walima baarakɛcogo wɛrɛ. Fɛn laban faralen ɲɔgɔn kan ka kan ka kɔrɔbɔ i n’a fɔ karti dafalen sanni ka sɛbɛnfura datugulen dɔrɔn jateminɛ.
| Fɛn suguya | Baara fɔlɔ | Sugandili kunba |
|---|---|---|
| Kulɛri PVC Core Sheet | A bɛ sigicogo ni a kɔnɔna walima a dakun kulɛri yelen di | Marka danfara, karti premium yecogo walima kɔnɔna kulɛri layɛrɛ ɲɛfɔlen |
| Kulɛri PVC ni fini jɛman | A bɛ basigi kulɛrilen ni yɔrɔ jɛlen dɔ fara ɲɔgɔn kan min bɛ se ka sɛbɛn | Porozɛ minnu bɛ substrat kulɛrilen ni ja sɛbɛnnenw lasegincogo tigitigi fila bɛɛ wajibiya |
| PVC sɛbɛn finman min bɛ se ka imprimer | A bɛ sɛbɛnnikɛlan finman kelen di | Karti ja min bɛ kɛ ka kɛɲɛ ni sariya ye, yɔrɔ min na, a kɔnɔna kulɛrilen walima yɔrɔ kulɛrilen min bɛ kɛnɛ kan, o tɛ wajibiya |
| Inkjet walima Digital Grade kɛrɛnkɛrɛnnen | A bɛ baara kɛ ni finimugu ye min dilannen don sɛbɛnnikɛlan ni tintiri kɛrɛnkɛrɛnnen dɔ kama | Baarakɛcogo nimɔrɔma minnu tɛ se ka baara kɛ ni offset walima silk-screen surface kɔrɔlen ye |
Ni i ye sɛbɛnni kɛ k’a ɲɛsin substrat kulɛri falen ma, o bɛ se ka CMYK hakɛw wuli ani ka dɔ bɔ danfara la. Layɛrɛ finman min bɛ kɔrɔsi, o bɛ basigi dɔ da min tɛ mɔgɔ si ta ye, o bɛ sɛbɛnnikɛla dɛmɛ ka logow, jaw, tigɛli finmanw ani karti ja caman caman ɲɔgɔnna bɔ ka ɲɛ.
O fini bɛ se ka ja sɛbɛnnen ni a jukɔrɔla kulɛri faranfasi. Coating opacity, thickness ani coverage ka kan ka sɔn ka kɛɲɛ ni seko ni dɔnko baara yɛrɛ ye bawo kulɛriw ni ja dilancogo danfaralenw bɛ masking kɛcogo wɛrɛw de wajibiya.
PVC basigilen kulɛrilen bɛ se ka to ka ye karti da la walima dilan yɔrɔw la minnu ma datugu ni laɲini ye. O b’a to karti bɔbagaw ni kartiw dilannikɛlaw bɛ se ka yecogo danfaralen dɔ dilan k’a sɔrɔ u ma sɛbɛnnikɛlan finman saraka min ka kan ka kɛ walasa ka ja caman dilan.
Layɛrɛ min datugulen don, o ka kan ka enki nɔrɔli mara ani ka to ka siri PVC basigilen na funteni ni degun kɔfɛ. O la, sɔnni sɛgɛsɛgɛli ka kan ka kɛ sɛbɛnni, furakɛli, lamination overlay, punching ani finished-card flex testing ye.
Fɛn dilannenw hakɛ bɛnnen bɛ bɔ sɛbɛnni kɛcogo la ani enki chimie la. Sɛbɛn min ɲɛfɔlen don ko offset printable, o man kan ka jate a yɛrɛma i n’a fɔ a bɛ bɛn ji la inkjet, electrophotographie walima UV digital system bɛɛ ma. Wallis bɛ ladilikan di ko aw ka sɛbɛnnikɛlan modɛli, enki taamasiyɛn, furakɛli fɛɛrɛ ani sɛbɛnni teliya makɔnɔnen dafa sani misali labɛnni ka kɛ.
| Printing Process | Material Requirement | Ladilikan min bɛ kɛ ka ɲɛsin a ka baarakɛcogo ma |
|---|---|---|
| Offset sɛbɛnni | Surface fanga kɔrɔsilen, coating nɔgɔya ani enki anchorage | Encre solide densité, dot reproduction, jalen, kase nɔrɔli ani post-lamination peel test |
| Soie-Ecran Printing (Ecran de soie) min bɛ kɛ | A bɛ bɛn ni solvent walima UV ink sugandilen ye ani coating coverage wajibiyalen | Mesh-mark yecogo, a kɛnɛyali, a nɔrɔli ani a kɛlɛli lamini kɔfɛ |
| Impression numérique UV (UV) ka baarakɛcogo | Surface bɛnna ni imprimante, primer ani UV ink system ye | Cross-hatch adhesion, bending, scratching ani overlay sirili |
| Inkjet Imprimerie (Enkjet Imprimerie) ka baara | Encre-receptive coating kɛrɛnkɛrɛnnen dabɔra enki chimie kama | Jaa density, jalen, ji kɛlɛli, smudging ani lamination compatibilité |
| Printing thermique walima Personnalisation | Overlay laban ni surface finish sugandilen don personalization taabolo kama | Ruban jiginni, abrasion, karti-kalanbaga minɛcogo ani variable-data durability |
Karti lamininen min bɛ kɛ cogoya la, o bɛ se ka kɛ ni finimugu jɛlen ye, PVC sɛbɛn kulɛri finman min sɛbɛnnen don, a kɔnɔna walima a sɔgɔlen layɛrɛ kelen walima caman, sɛbɛnfura filanan ani kɔfɛla datugulan. Karti minnu bɛ ni ɲɔgɔndan fila ye walima minnu tɛ ɲɔgɔn sɔrɔ, olu fana bɛ se ka kɛ ni antɛni ni puce inlay ye. A yɔrɔ kelen-kelen bɛɛ janya ka kan ka jate ɲɔgɔn fɛ walasa ka se ka karti dafalen jɔli kofɔlen sɔrɔ.
Front transparent walima functional overlay
PVC sɛbɛn kulɛri finman min sɛbɛnnen bɛ ɲɛfɛ
PVC core, RFID prelam walima cɛmancɛ lamini baarakɛta
Kɔfɛ sɛbɛnfura walima kolomayɔrɔ kulɛrilen
Kɔfɛla datugulan ni magnɛti sɛrɛkili ye min bɛ se ka sugandi, signature panneau walima lakanafɛn
PVC sɛbɛnw kulɛri finmanw bɛnnen don B2B karti porogaramuw ma minnu bɛ sɛbɛnni kɔkanna kɔlɔsilen de wajibiya ka fara substrat kulɛrilen kan walima dakun kulɛrilen kan. O fɛn bɛ se ka dilan karti kɔrɔw kama ka fara puce ni contactless structures kan, sistɛmu-nivo sɛgɛsɛgɛli kɔfɛ.
Banki, kredi, debiti ani kartiw minnu bɛ sara ka kɔn
Nafolo karti minnu bɛ ni ɲɔgɔndan fila ye ani minnu tɛ ɲɔgɔn sɔrɔ
Gofɛrɛnaman, baarakɛlaw ani kalanso ka ID kartiw
Donda kɔlɔsili ani lotɛli kilisi kartiw
Mɔgɔya, kantigiya, VIP ani kado kartiw
Karti minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, minnu dilannen don ni kulɛriw ye
Basi kulɛriw bɛ se ka labɛn ka bɔ farikolo ta fan fɛ, laboratuwari misali min dabɔra walima kulɛri kode dɔnnen. Ikomi PVC dilanni, a sanfɛla labɛncogo ani a yeelen bɛ nɔ bila yecogo la, o la, a dilanni misali min dabɔra, o ka kan ka mara i n’a fɔ kulɛri jiralan ye segin-ka-bɔnye komandiw kama.
Sannikɛlaw ka kan k’a jira ni finimugu ye yɔrɔ dafalen ye walima ni sugandili ye, fan kelen walima fan fila, ani ni yɔrɔ kulɛrilen minnu ma datugu, olu ka kan ka to ka ye. Seko ni dɔnko sɛbɛnni ni finimugu-dakun muɲuli ka kan ka jateminɛ sɛgɛsɛgɛli kɛtuma na.
Mati, nɔgɔlen walima poroze kɛrɛnkɛrɛnnen fini wɛrɛw bɛ se ka baro kɛ ka kɛɲɛ ni sɛbɛnni ni lamini kɛcogo ye. Surface grade ka kan ka sɔn ni encre, imprimante, overlay ani lamination paramètres yɛrɛ ye.
Sɛbɛn hakɛw ka kan ka bɛn kiliyan ka presse, collation ani punching layout ma. RFQ ka kan ka sɛbɛnfura dafalen hakɛ, suman walima masin ɲɛminɛcogo ni a bɛnnen don, karti matiriyali, tɔgɔsɛbɛnni taamasiyɛnw ani dakun cogoya min bɛ sɔn.
| Inspection Item | Mun na a nafa ka bon | Sɔncogo |
|---|---|---|
| Base Kulɛri | A bɛ marka cogoya ni segin-ka-bɔnye kɛcogo kɔrɔsi | Aw bɛ a suma ni kulɛri misali bolonɔbilalen ye yeelen cogoyaw la minnu bɛnna |
| Kulɛri finman ni Opacity | A bɛ nɔ bila seko ni dɔnko danfara la ani ka basigi kulɛrilenw masiri | Ɲɛjirali sumani ka fara poroze kɛrɛnkɛrɛnnen kulɛri walima opacity sumani kan yɔrɔ minnu na a mago bɛ |
| Coating Adhesion (Kɔrɔli Nɔrɔli). | A bɛ dɔ bɔ jirisunw bɔli la sɛbɛnni, lamini ani karti baara waati | Kaseti, cross-hatch walima bɛnkansɛbɛn peel test ka kɔn lamination ɲɛ ani lamination kɔfɛ |
| A bonya ni a ka flakɛ | A bɛ dɛmɛ don sɛbɛnni sɛbɛnni, kolajɛ ani karti laban janya kɔlɔsili la | Yɔrɔ caman janya sumani ani flati sɛgɛsɛgɛli |
| Surface Energy ani Print Nɔrɔli | A bɛ nɔ bila jisigi, jalen ani ja muɲuli la | Dyne walima bɛnkan sɔrɔlen surface test o kɔfɛ production-ink adhesion testing |
| Lamination Bonding (Jɛɲɔgɔnya Lamination). | A bɛ bugunw, dakun kɔrɔtacogo ani layɛrɛw farali bali | Karti kulu dafalen kɔrɔbɔ funteni, tansiyɔn ani cycle laɲininen na |
| Finished-Karti Baarakɛcogo | A b’a jira ko jɔli dafalen bɛ baara kɛ mɔgɔw jiginni kɔfɛ | Punching, bending, torsion, abrasion ani functional-card sɛgɛsɛgɛliw i n’a fɔ a bɛ kɛ cogo min na |
Aw bɛ karti laban kɛcogo di, layɛrɛ stack, laɲini dafalen thickness, chip walima antenne design, overlay suguya ani planned personalization process.
Aw bɛ basigi kulɛri wajibiyalenw di, ka fini jɛman datugulan, sɛbɛnni dosiyew ani marka-kulu laɲiniw kɔrɔlenw di. A jira ni yɔrɔ kulɛrilenw ka kan ka to kɛnɛ kan sɛbɛnni kɔfɛ.
Aw bɛ sample boli presse laɲininen kan ni production ink ye, curing settings, overlay ani lamination cycle. Aw bɛ ja density, coating adhesion, layer bonding ani karti flatness lajɛ.
I bolonɔ bila sɛbɛnfura min dabɔra ani karti dafalen na, k’o mara i n’a fɔ fɛn min bɛ kɛ ka ɲɛsin kulɛri, finimugu, sɛbɛnni jaabi, lamini ani segin-ka-bɔnye sɛgɛsɛgɛli ma.
Wallis bɛ karti-baarakɛminɛnw di dilanbagaw ma, fɛn caman tigɛlikɛlaw, porozɛw lajɛlenw ani u feerelaw ma. Dɛmɛ bɛ se ka kɛ basigi kulɛriw ye minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, finiw dilanni, sɛbɛnw hakɛ bɛnni, misali labɛnni, karti ni sigicogo jɛɲɔgɔnya ani fɛnw bilali jamana kɔkan.
Kulɛri ni fini jɛmanw yiriwali ladamu ka da misaliw kan minnu dagalen don
Fɛn minnu bɛ dɛmɛ don sɛbɛnni na, lamination overlay ani karti jiginni na
Porozɛ kɛrɛnkɛrɛnnenw ka sɛbɛn hakɛ, a bonya ani a sanfɛla suganditaw
Sample ani Golden Sample sɔnni ka sɔrɔ ka volume production (hakɛ hakɛ) dilan
Export pakew ani B2B komandi coordination
Sɛbɛnw sɛgɛsɛgɛli ni u foroko dilanni ka kan ka finimugu tanga buguri, sɔgɔsɔgɔninjɛ, ji, balili ani bɔgɔbɔgɔli ma. Baro bɛ se ka kɛ pakew labɛncogo kan ka kɛɲɛ ni sɛbɛnw hakɛw ye, komandi hakɛ, bolifɛnw tacogo ani kiliyanw ka labeli wajibiyalenw.
| Kunnafoni wajibiyalenw | Details ka di |
|---|---|
| Karti Aplikasiɔn | Banki karti, ID karti, don karti, tɔndenw ka karti, kado karti walima poroze wɛrɛ |
| Base PVC Kulɛri | Kulɛri kode, farikolo ta fan fɛ walima ɲɛfɔli min bɛ yen min dabɔra |
| Coating finman | Fɛn kelen walima fila, dafalen walima sugandilen datugucogo, fini ni opacity laɲini de wajibiyalen don |
| Sɛbɛnni kɛcogo | Press model, encre type, curing method ani sɛbɛnnikɛlan fan hakɛ |
| Sɛbɛnw ka ɲɛfɔli | A bonya, a bonya, a janya, a hakɛ ani a pakew diyabɔ |
| Kartiw jɔli | Overlay, core, inlay, magnetic stripe, chip ani laban janya wajibiyalenw |
| Jogoɲumanya sariyaw | Kulɛri muɲuni, finimugu nɔrɔli, sanfɛla fanga, lamini ani karti dafalen sɛgɛsɛgɛliw |
O ye PVC karti substrat ye min ɲɛ ye kulɛri gɛlɛn ye, a ɲɛ ye fin ye min bɛ se ka sɛbɛn. Basi kulɛrilen bɛ karti dɔnni di, k’a sɔrɔ layini finman bɛ seko ni dɔnko kɛcogo jɛlen ni min bɛ se ka fɔ ka ɲɛ, o dɛmɛ.
Basi kulɛri dibiman walima saturalen bɛ se ka CMYK hakɛw Changer ani ka dɔ bɔ danfara la. Layɛrɛ finman dɔ bɛ kulɛri jukɔrɔla datugu ani ka kɔkannafɛn dɔ di sɛbɛnniw, logow, jaw ani lakana jaw ma.
Offset grades bɛ se ka di, nka sɛbɛn in ka kan ka sɛgɛsɛgɛ ni kiliyan ka tintin yɛrɛ ye, a ka presse, a jalen cogoya, a dacogo ani a lamination cycle sani a ka kɛ jamaba ye.
A tɛ kɛ a yɛrɛma. Ji min bɛ kɛ ni tintiri ye ani nizɛri sitɛmu dɔw bɛ finimugu kɛrɛnkɛrɛnnen dɔ de wajibiya min bɛ enki minɛ. Imprimante modɛli ni enki chimie ka kan ka dafa sani i ka fɛn suguya sugandi.
Awɔ. Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka labɛn ka bɔ kulɛri kode walima farikolo ta fan fɛ. Sɛgɛsɛgɛli bolonɔbilalen ka kan ka kɛ fɛn dilanni ni segin-ka-bɔnye sariya ye.
Fɛn kelen walima fan fila dacogo bɛ se ka baro kɛ ka kɛɲɛ ni karti dilanni n’a sɛbɛnni cogoya ye. Coating coverage, registration ani surface wajibiyalenw ka kan ka ɲɛfɔ RFQ kɔnɔ.
Datugulan sugandilen walima ja dilancogo bɛ se ka yɔrɔ kulɛri sugandilenw to yen. Dakun dancɛ ni sɛbɛnni sɛbɛnni ka kan ka dafa ni misaliw ye.
A bɛ Se ka Jate i n’a fɔ sɛbɛnnikɛlan min bɛ ‘yɔrɔ fla-fla jɔli kɔnɔ. Stack dafalen, i n’a fɔ RFID inlay, overlays, chip cavity ani lamination parameters, olu ka kan ka sɛgɛsɛgɛ ɲɔgɔn fɛ.
Sɛgɛsɛgɛli minnu bɛ fɔ, olu ye basigi kulɛri, fini jɛman bonya ni opacity, a bonya, a flakɛ, a dacogo nɔrɔli, a sanfɛla fanga, a sɛbɛnni nɔrɔli, a lamination bonding ani a ka masin sɛgɛsɛgɛliw ni karti dafalenw ye.
Baro bɛ se ka kɛ misaliw kan walasa ka kulɛri, finimugu, sɛbɛnni ani lamini jateminɛ. Yɛlɛma minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka kɛ ni seko ni dɔnko baara ye, kulɛriw jiracogo ani karti jɔcogo kunnafoniw sani misali labɛnni ka kɛ.
Aw bɛ Sanu Misali bolonɔbilalen dɔ mara ani ka bɛnkan sɔrɔcogo ɲɛfɔ. Segin-ka-bɔnyew ka kan ka lajɛ ni basigi-kulu, finimugu ani karti dafalen ɲɛfɔli ye.
Aw bɛ a kɛcogo, a basigilen kulɛri, a datugucogo, a sɛbɛnni kɛcogo, a sɛbɛnfura hakɛw, a bonya, a hakɛ, a karti-yɔrɔ jɔcogo, a sɛgɛsɛgɛli sariyaw ani a foroko wajibiyalenw di.
Aw ye aw ka kulɛri jiralan ci Wallis ma, aw ka finiko wajibiyalen, sɛbɛnni kɛcogo, sɛbɛnw ɲɛfɔcogo, karti jɔcogo ani komandi hakɛ jateminɛlen. Fɛɛrɛbɔjɛkuluw ni feerekɛlaw bɛ se ka poroze kɛrɛnkɛrɛnnenw ka fɛnw ladilikan ni misali bolodacogo labɛn.
