|
Wallis bɛ HiCo ni LoCo magnetic stripe coated Film overlay filimu di walasa ka karti lamini. PVC , PETG walima PC sugandiliw sugandi, sɛrɛkili jɔyɔrɔ, a bonya, a bonya ani OEM caman sɔrɔli ni misali sɛgɛsɛgɛli ye.
WLS-Oeralay ni Mag stripe ye
WALLIS
| Kulɛri: | |
|---|---|
| A bonya : | |
| Wajibiya: | |
| Hakɛ: . | |
HiCo ni LoCo Film overlay enduit ni Magnétique Stripe ye karti Lamination kama
Wallis min datugulen don Film overlay ni magɛnni sɛrɛkili ye , o ye karti-laminifɛn ye min bɛ baara kɛ, min bɛ lakanani jɛlen Film overlay , sirilan datugulan, ani magɛnni sɛrɛkili jɛlen fara ɲɔgɔn kan sɛbɛn kelen kɔnɔ min labɛnnen don ka dilan. A bɛ se ka lamini ɲɔgɔn fɛ ni karti-kɔri sɛbɛnw ye minnu sɛbɛnnen don sani karti dafalenw ka punch ani ka kodɔn.
A bɛ sɔrɔ kɔnɔ HiCo ni LoCo magnetic stripe options , Film overlay dabɔra karti dilannikɛlaw ye minnu bɛ lotɛli kilisi kartiw dilan, don kartiw, tɔndenw ka kartiw, kantigiya kartiw, baarakɛlaw ka kartiw, bolifɛnw ka kartiw, banki kartiw, danyɔrɔ kartiw, ani plastiki karti wɛrɛw minnu bɛ se ka kalan masin fɛ.
Ladamu dilancogo sugandilenw: PVC , PET , PETG walima PC substrat; 0,04mm–0,15mm janya; A4, A3, sɛbɛnfura walima cogoya min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye; HiCo walima LoCo sɛrɛkili; sɛrɛkili kulɛri, a bonya, a jɔyɔrɔ, a ɲɛsincogo, a dacogo ani a foroko minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
| Fɛn dilannen Tɔgɔ | Filimu Film overlay min datugulen don ni magɛnni sɛrɛkili jɛlen ye |
| Fɛn minnu bɛ sɔrɔ | PVC , PET , PETG , PC , walima fɛn minnu bɛ bɛn karti ma minnu bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye |
| Film overlay A ka bon | 0,04mm–0,15mm ye; sugandili minnu bɛ kɛ tuma caman na, olu ye milimɛtɛrɛ 0,05, milimɛtɛrɛ 0,08 ani milimɛtɛrɛ 0,10 ye |
| Sheet Size (sɛbɛnni hakɛ). | A4, A3, sɛbɛnw hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, walima poroze kɛrɛnkɛrɛnnen cogoya |
| Magnetic Stripe suguya | HiCo walima LoCo |
| Wajibiya Sugandiliw | 300 Oe LoCo ye; 2750 Oe walima 4000 Oe HiCo; fɛn wɛrɛw ɲɛfɔcogo minnu bɛ kɛ ka kɛɲɛ ni poroze dafalen ye |
| Kulɛri min bɛ kɛ ni bandi ye | Kulɛri nɛrɛma walima min bɛ kɛ ka kɛɲɛ ni magnɛti-stripe grade ni komandi wajibiyalenw ye |
| Stripe (Baara) Lajɛ | A bonya bɛ kɛ cogo la min bɛ kɛ ka kɛɲɛ ni karti dilanni ni kalanbaga ka ɲininiw ye |
| Stripe jɔyɔrɔ | Janya min bɛ kɛ ka kɛɲɛ ni i yɛrɛ sago ye ka bɔ sɛbɛnfura walima karti dafalen da la, ka kɛɲɛ ni ja ye min dagalen don |
| Datugulan | Lamination bonding coating bɛ kɛ karti-contact fan latigɛlen na |
| Surface Finish (Sufɛla Fini). | A bɛ kɛnɛya, a bɛ manamana, a bɛ kɛ ni nɛgɛ ye, walima a bɛ kɛ ka kɛɲɛ ni a yɛrɛ sago ye |
| Baarakɛcogo kunbabaw | Lotɛli ka kartiw, don kartiw, banki kartiw, tɔndenw ka kartiw, kantigiya kartiw, bolifɛn kartiw, baarakɛlaw ka kartiw, ID kartiw ani hakili kartiw |
| OEM Ladamuni | Fɛn min bɛ kɛ, u bonya, u bonya, u sɛrɛkili hakɛ, u bonya, u jɔyɔrɔ, u kulɛri, u dacogo, u sanfɛla, u pakew, ani u sɛbɛnni |
Fɛɛrɛko paramɛtiriw bɛɛ ka kan ka dafa ni fɛn ɲɛfɔlen ye min dabɔra, ni magnetic-stripe layout ja, ani production sample ye. Karti dafalen baarakɛcogo bɛ bɔ karti jɔcogo dafalen na, a sɛrɛkili hakɛ, a kodɔn, a kalanbaga, a ka tintin, a lamini minɛnw, ani a baarakɛcogo.
Magɛnni hakɛ, filimu basigilen ani a dilanni cogoya sugandi ka bɔ karti dafalen wajibiyalen na. Nafa minnu bɛ duguma, olu ye sɔrɔyɔrɔw jiracogo ye minnu bɛ kɛ tuma bɛɛ, u tɛ stock layidu talenw ye otomatiki walima diɲɛ bɛɛ ka sɔnni dantigɛliw.
| Wajibiya | Typical Sourcing Direction | Sannikɛlaw ka kan ka min sɛgɛsɛgɛ |
|---|---|---|
| Magɛnni sɛrɛkili min ka fanga ka dɔgɔ | LoCo, a ka c’a la 300 Oe lamini na | Encodeur suguya min bɛ yen, sɛbɛnni kura wajibiyalenw, foro jirali ani kalanbaga bɔli |
| Magɛnni sɛrɛkili min ka fanga ka bon | HiCo, a ka c’a la 2750 Oe walima 4000 Oe | Encoder sɛbɛnni seko, magnetic signal, karti ɲɛnamaya ani kalanbaga ka bɛnkan |
| Karti Film overlay jateminɛnanw cogoya | milimɛtɛrɛ 0,05, milimɛtɛrɛ 0,08 walima milimɛtɛrɛ 0,10; jateminɛ wɛrɛw kɛli ni ɲinini ye | Film overlay janya min tɛ walima ni stripe build-up, thickness muɲuni ani stack dafalen tɛ o la |
| Magnɛtiki sira labɛncogo | Track kelen, fila walima saba dilancogo i n’a fɔ a mago bɛ cogo min na | Track jate, track centerlines, recording format, kalanden kunkolo jɔyɔrɔ ani kode wajibiyalenw |
| Sɛrɛkiliw bonya minnu bɛ sɔrɔ tuma caman na | A bɛ se milimɛtɛrɛ 8,4 walima milimɛtɛrɛ 12,7 ma ni a bɛnnen don | Track geometry ani tiɲɛ na fini-karti stripe width ka bɔ ja dabɔlen na |
| Basi matériel ani coating | PVC sariyasun; PET , PETG walima PC yiriwali danfaralen fɛ | Printed core, ink chimie, coating fan, presse recipe ani peel performance |
| Furakɛcogo min bɛ kɛ | A4, A3, ladamu sɛbɛnw walima baarakɛcogo ɲɛfɔlen | Karti fɔcogo, a ɲɛsincogo sɛrɛkili, punch taamasiyɛnw, a flakɛcogo, a pakecogo ani a hakɛ |
Sɛbɛn min dabɔra, o ka kan ka magɛnni hakɛ yɛrɛ fɔ, a substrat ani a jɔcogo kɔrɔbɔlen. Banki walima wari sarali baarakɛcogo bɛ karti dafalen ka setigiya wɛrɛw wajibiya minnu bɛ kɛ ka ɲɛsin fɛɛrɛ kɛrɛnkɛrɛnnenw ma.
Film overlay min datugulen don ni magɛnni sɛrɛkili ye, o ye karti jɛlen Film overlay sɛbɛn ye min kɔnɔ magɛnni kunnafoni sɛrɛkili ni lamini sirili yɔrɔ bɛ sɔrɔ kaban. Karti dilanni senfɛ, o fɛnw bɛ dalajɛ ni karti kɔnɔna sɛbɛnnenw ye ani baarakɛyɔrɔ wɛrɛw, ka lamini ni funteni ni degun kɔrɔsilenw ye, ka tila ka u sɔgɔ ka kɛ karti magnɛti dafalenw ye.
Ni i ye magɛnni sɛrɛkili don Film overlay kɔnɔ, o bɛ se ka sɛrɛkili-dacogo danfaralen dɔ ban. O bɛ karti dilannikɛlaw dɛmɛ u ka layɛrɛ labɛnni nɔgɔya, ka sɛrɛkiliw jɔcogo ɲɛ, ka dɔ bɔ a minɛcogo la, ani ka karti dafalen lakanani yɔrɔ dɔ dilan o lamini cycle kelen kɔnɔ.
Magɛnni sɛrɛkili kɔnɔ, fɛnɲɛnɛmaw bɛ yen minnu bɛ Se ka magɛnni Kɛ minnu bɛ Se ka kodɔn ni kunnafoniw ye minnu bɛ Se ka Kàlan masin fɛ. Magɛnni kodɔn minnu bɛ bɛn ɲɔgɔn ma, olu bɛ magɛnni jiginni cogoya dɔ dilan sɛrɛkili kan, wa karti kalanbagaw b’o jiginniw sɛmɛntiya ka kɛ kunnafoni nimɔrɔma ye, minnu bɛ kɛ ni doncogo, dɔnni, tɔndenw, jatigila, wari sarali walima bolifɛnko siratigɛ ye min bɛ bɛn o ma.
Strip yɛrɛ ye kunnafoni-sɛbɛnni-minɛn ye. Sistɛmu lakanani bɛ bɔ karti porogaramu dafalen na, i n’a fɔ kunnafonidilanw cogoya, kɔkanna sɛgɛsɛgɛli, kalanbagaw labɛncogo, doncogo sariyaw, puce fɛɛrɛ, ɲɛnayeli lakanani fɛɛrɛw, ani seereyaw ɲɛnabɔcogo.
Barcode ani Karti min bɛ wele ko Magnétique Stripe
Karti lankolonw labɛnnen don ka sɛbɛnni kɛ ani ka kodɔn
LoCo kɔrɔ ye ko fanga dɔgɔyali. LoCo ka fɛnsɛbɛnni min bɛ Kɛ tuma bɛɛ, o bɛ Taa 300 Oe ɲɔgɔn na. A bɛ magɛnni fanga dɔgɔya de wajibiya walasa ka kodɔn, wa a bɛ se ka bɛn lotɛli kilisi kartiw ma, waati dɔɔnin don kartiw, ko kɛlenw kartiw, fɛnw laseli kartiw, ani baarakɛminɛn wɛrɛw la, kartiw bɛ to ka bɔ kokura walima ka sɛbɛn kokura.
Ikomi LoCo kunnafoniw bɛ se ka nɔ bila nɔgɔya la kɛnɛma magɛnni barikamaw fɛ, sannikɛlaw ka kan ka baarakɛyɔrɔ laɲininen jateminɛ, karti ɲɛnamaya, kodɔn minɛnw, ani kalanbagaw ka sigida sanni u k’a sugandi.
HiCo kɔrɔ ye fanga-dafalenba ye. Porozɛ minnu bɛ kɛ tuma caman na, olu bɛ se ka kɛ 2750 Oe walima 4000 Oe ye. HiCo sɛrɛkiliw bɛ se ka magɛnni bɔli kɛ kasaara la, wa a ka c’a la, u bɛ jateminɛ kɛ kartiw la minnu bɛ minɛ tuma caman na walima minnu bɛ baara kɛ ka mɛn i n’a fɔ baarakɛlaw ka don kartiw, bolifɛnw kartiw, tɔndenw ka kartiw, mɔgɔya kartiw, ani wariko kartiw.
LoCo sugandi ni encodeur ni reader ekosisɛti sigilen bɛ ka stripe low-coercivity de wajibiya; a ka ca porogaramuw la minnu bɛ kɛ waati kunkurunnin kɔnɔ. Aw bɛ HiCo sugandi ni minɛnw bɛ fanga caman dɛmɛ ani ni a ka kan ka kɛ sababu ye ka a yɛrɛ tanga kasaara ma. Sɛbɛnni kura seko bɛ bɔ sistɛmu de la, a tɛ bɔ stripe grade dɔrɔn na.
Sugandili laban fana ka kan ka bɛn kiliyan ka encodeur, reader, data format, magnetic-stripe standard, track configuration, service environment, ani finished-card qualification process ma.
Magɛnni sɛrɛkili bɛ dilan i n’a fɔ Film overlay layini yɔrɔ dɔ, o bɛ dɔ bɔ sɛrɛkili danfaralen kɛli la sɛbɛnni walima lamini kɔfɛ. O bɛ se ka fɛnw labɛnni nɔgɔya ani ka u dilanni waati boloda.
Kɛrɛ min datugulen don, o dilannen don walasa a ka siri ni karti-kɔnɔfɛnw sɛbɛnnenw ye minnu bɛ bɛn ɲɔgɔn ma, lamination thermal waati. Ni aw ye finimugu sugandi ka ɲɛ, o bɛ se ka dɛmɛ ka dɔ bɔ bugunw na, ka dawolo kɔrɔta, ka u nɔrɔli barika dɔgɔya, ani ka u ni ɲɔgɔn cɛ faranfasi.
Stripe position bɛ se ka dilan ka kɛɲɛ ni ja fɛɛrɛbɔlen ye min dabɔra, o bɛ dɛmɛ ka segin-ka-bɔnye sabati sɛbɛn laminini ni karti punching kɔfɛ.
Film overlay jɛlen bɛ ja sɛbɛnnenw, sɛbɛnniw, barɔdiw, logow, fotow, ani kunnafonidilan caman lakana ka bɔ sɔgɔsɔgɔninjɛ, nɔgɔ, nɔgɔ ani segin-ka-bɔnye kɛcogo kɔrɔ la.
Fɛn minnu bɛ kɛ, u janya, u sɛbɛnfura hakɛ, u sɛrɛkili hakɛ, u sɛrɛkili jɔyɔrɔ, u bonya, u sanfɛla fini, u dacogo, u pakew, ani u taamasiyɛnw bɛ se ka kɛ ka kɛɲɛ ni karti dilanni layini suguya wɛrɛw ye.
Ni lakanani Film overlay ni magɛnni sɛrɛkili farala ɲɔgɔn kan ka kɛ fɛn kelen ye, fɛn dilannikɛlaw bɛ se ka dɔ bɔ sɛrɛkiliw cili baara danfaralenw na, u minɛ waati, ɲɔgɔndan baara, ani fɛn dilanni-taamasenɲɛw.
Magnetic Stripe ani Chip Card Solutions (Kartiw) minnu bɛ kɛ ni puce ye
Magnɛtiki Film overlay ka ɲɛsin Karti Lamini ma
PVC Film overlay bɛ kɛ ka caya plastiki karti kɔrɔlenw na bawo a bɛ balansi nafama di lamini baarakɛcogo, fɛn caman sɛgɛsɛgɛli, sɛbɛnni bɛnkan, yɔrɔ cogoya, ani musakaw ma.
PET ani PETG jatedenw bɛ se ka jateminɛ kariti jɔcogo la minnu bɛ masin fanga caman wajibiya, kemikɛli kɛlɛli, hakɛ sabatili, walima ka bɛn ni PET -denbaya ka karti kɔnɔna ye.
Polikarbonati Film overlay bɛ se ka jateminɛ kariti jɔli la min bɛ se ka muɲu kosɛbɛ, dantigɛli sɛbɛnw lakananenw, ani baarakɛcogo minnu bɛ PC -lamini walima laser-personalisation fɛnw wajibiya minnu bɛ se ka bɛn. Layɛrɛ dafalen jɔcogo ka kan ka tiɲɛ sani a ka dilan.
Magnetic coercivity, stripe width ani track format ye sɛgɛsɛgɛli hakɛ danfaralenw ye. Sɛrɛsi min bɛ tɔgɔ la, o bɛ se ka dɛsɛ baara la hali bi ni fɔlisen walima kalanbaga jateminɛcogo tɛ bɛn.
| Design Element | Practical Requirement | Sɔncogo Dalilu |
|---|---|---|
| Track 1 / Track 2 / Track 3. Bamako, Mali | A jira tigitigi dɔnkili minnu bɛna kodɔn ani ka baara kɛ ni u ye; track kɔnɔkow ni recording density ka kan ka bɛn sistɛmu ma | Encodeur configuration, data structure ani decoded sample records |
| Stripe bonya | Bonya i n’a fɔ milimɛtɛrɛ 8,4 walima milimɛtɛrɛ 12,7 ye fɛnw ye minnu bɛ tali kɛ tuma caman na, u tɛ diɲɛ bɛɛ ka dantigɛliw ye | Ja min bɛ bonya ni sira cɛmancɛ jɔyɔrɔw jira minnu bɛ se ka baara kɛ |
| Jyɔrɔ ni ɲɛsincogo | Dimension ka bɔ fini-karti da la punch kɔfɛ, a tɛ bɔ A4/A3 sɛbɛn da la dɔrɔn | CAD ja bolonɔbilalen, presse orientation ani sɛbɛn fɔlɔ sɛgɛsɛgɛli |
| HiCo / LoCo ye | Wajibiya sugandi ka bɔ baarakɛcogo ni sɛbɛnnikɛla seko la, i kana kɛ karti si hakɛ makɔnɔnen dɔrɔn ye | Misali min kodɔnna sɛnɛko sɛbɛnnikɛla fɛ ani k’a kɔrɔbɔ kalanden yɛrɛ kan |
| Siginidenw ka jogo ɲuman | Magnetic flux ni decoded information ka kan ka to kalanni na lamination kɔfɛ ani a minɛcogo bɛnnen kɔfɛ | Kalan seginni ɲɛfɔlen, taamasiyɛn-jogo walima fili-hakɛ sariya |
| Karti hakilitigi hybride | RFID antɛni/puce bilali ani magnɛti sɛrɛkili sigiyɔrɔ man kan ka sɔsɔ ni fɛn dilanni baarakɛminɛnw ye | RF ka karti dafalenw ni magɛnni kalanni sɛgɛsɛgɛliw kɛra misali kelen kan min dabɔra |
Porozɛ minnu bɛ tali kɛ ISO /IEC 7811-2 (wajibiya dɔgɔya) walima ISO /IEC 7811-6 (wajibiya caman) la, aw bɛ karti dafalen wajibiyalenw ni kɔrɔbɔli fɛɛrɛw ɲɛfɔ minnu bɛ sirataama. O sariyaw tɛ yamaruya di diɲɛ bɛɛ ka Oe nafa kelen ma.
Karti-kɔnɔ-sɛbɛnw sɛbɛn ni tintin ye min dagalen don, ni sɛbɛnni kɛcogo, u jalen kɛcogo ani u tɔgɔ sɛbɛnni taamasiyɛnw ye. Aw bɛ a lajɛ ni tintin sitɛmu bɛ bɛn ni finimugu sugandilen ye.
Aw bɛ fan min datugulen don, a fan min bɛ kɛ ni magɛnni ye, a fan min bɛ se ka kɛ, ani min ɲɛsinnen bɛ sanfɛla walima duguma Film overlay ma, o dɔn sani aw ka karti layɛrɛw lajɛ.
Aw bɛ ɲɛfɛ Film overlay , sɛbɛnfura core layers, inlay walima functional core, ani kɔfɛ magnetic Film overlay bila cogo la min dagalen don. Bonding fanw ka kan ka ɲɛsin karti-kɔnɔna yɔrɔw laɲinitaw ma.
Aw bɛ funteni, tansiyɔn, funteni waati, nɛnɛ waati, bɔli plati ani stacking fɛɛrɛ bɛnnenw kɛ minnu sigilen don sɛgɛsɛgɛli senfɛ. Lamini kɛcogo min bɛ kɛ diɲɛ bɛɛ kɔnɔ, o man kan ka jate fɛn bɛɛ faralen ɲɔgɔn kan.
Aw bɛ sɛbɛnfura lamininen sɔgɔ ka don karti dafalenw na ani ka karti hakɛw, a sɛrɛkiliw, a ɲɛda cogoya, a flakɛ, a dakunw sirili, ani a yecogo sɛgɛsɛgɛ.
Aw bɛ sɛrɛkili kodɔn ni sɛnɛko kodɔn laɲinilen ye, o kɔfɛ, aw bɛ kalan kɛcogo sɛgɛsɛgɛ, ka kunnafoniw nɔfɛtaama, taamasiyɛnw bɛnkan, swipe sira, fili hakɛ, ani ka bɛn ni karti kalanbagaw ye minnu laɲininen don.
Film overlay sugandili ka kan ka lajɛ karti lamininen dafalen kɔnɔ. Filimu min bɛ kɛ ka finimugu da, o bɛ se ka baara kɛ ka ɲɛ a yɛrɛma, nka a bɛ dɛsɛ sɛbɛnni kɔfɛ, presse sumayalen, punch walima kodeli kɔfɛ.
| Production Stage | Mun ka kan ka Dɛsɛ | cogoya kɔlɔsi ni a ma sɔrɔ |
|---|---|---|
| Labɛnni koloma sɛbɛnnen | Fɛn minnu bɛ bɛn ɲɔgɔn ma, enki furakɛli, yɔrɔw dafalenw ani mugu walima tulu tɛ yen | Bugunw, bɔgɔdaga ani finimugu delamination |
| Film overlay kolajɛ | Aw bɛ kɛrɛ min datugulen don ka taa a bila a kɔnɔna na, a fan min bɛ kɛ ni sɛrɛkili ye ani a ɲɛda cogoya taamasiyɛnlen | Sɛrɛkili suturalen walima kɔseginlen, nɔrɔli barikama ani kalanbaga bilali cogo jugu |
| Lamination (Lamini) ye | Funteni, degun, sigili, bɔli ani nɛnɛ min bɛ kɔrɔsi, o dagalen don fɛnw kulu bɛɛ kama | Warping, stripe deformation, peel failure ani surface taamasiɲɛw |
| Punching (dumuni) kɛli | Karti dafalen jateminɛ, sɛrɛkili ni dakun cɛ janya, tigɛyɔrɔ ani baarakɛminɛnw ɲɔgɔndan | Karamɔgɔ kunkolo bɛnbaliya ani sɛrɛkili dawolo tiɲɛnen |
| Encode (kodeli) kɛli | HiCo/LoCo sɛbɛnnikɛlaw ka sigicogo, sira sugandili, kunnafoniw karti ani swipe sira ɲuman | Sɛbɛnni dɛsɛlenw, taamasiyɛn barikamaw, track data juguw |
| Kalan-segin / barokun fɔlɔ | Encodeur de production lakika ani foro kalanbaga ni tɛmɛsira/dɛsɛ hakɛ sɛbɛnnenw | Foro dɛsɛ hakɛ ka ca hali ni ɲɛnayeli ka ɲi |
Presse paramètres ka kan ka bɔ production tests validés la ink, film, coating ani magnetic stripe yɛrɛ la. Aw kana ɲɔgɔndankɛla dɔ ka funteni hakɛw kɛ i n’a fɔ Wallis ka ɲɛfɔli kɛcogo kɔrɔ.
LoCo magnetic stripe Film overlay s bɛ jateminɛ tuma caman na lotɛli dunanw ka so kartiw kama bawo a ka c’a la, seereyaw bɛ sɛbɛn kokura ani ka bɔ kokura karti baara waati la.
HiCo magɛnni sɛrɛkiliw bɛ se ka dɛmɛ don ni dondaw kartiw ye minnu bɛ kɛ tuma caman na, baarakɛlaw ka badgew, kalanso kartiw, yɔrɔ ka seereyaw, ani dantigɛli kartiw minnu bɛ a ɲini ka se ka u yɛrɛ tanga ka ɲɛ ka ɲɛsin u bɔli ma kasaara la.
Magnetic stripe Film overlay s bɛ se ka kɛ farikoloɲɛnajɛ kartiw ye, kulu ka kartiw, feerekɛlaw ka kantigiya kartiw, gafemarayɔrɔ kartiw, ɲɛnajɛ kartiw, ani kiliyanw dɔnni porogaramuw.
Karti magɛnni bɛ se ka dɛmɛ don bolifɛnw sarali la, ka tikitiw di, ka mɔbili bolibagaw dɔn, ka bolifɛnw jɔyɔrɔ sɔrɔ, ani ka bolifɛnw tacogo wɛrɛw kɛ ni u ni kalanbagaw ka baarakɛminɛnw ye minnu latigɛra.
HiCo magɛnni sɛrɛkili fɛnw bɛ se ka jateminɛ wariko karti jɔcogo la minnu bɛ magɛnni kunnafoniw de wajibiya minnu bɛ se ka kalan masin fɛ. Karti dafalenw ka kan ka tiɲɛ ka kɛɲɛ ni sannikɛla ka fɛɛrɛ, lakana, wari saracogo ani sariyaw ye minnu bɛ sirataama.
Magnetic stripe baarakɛcogo bɛ se ka fara ɲɔgɔn kan ni contact pucew ye, contactless RFID walima NFC inlays, barkode sɛbɛnnenw, QR codes, signature panneaux, ani yelenw lakanani fɛɛrɛw walasa ka kalanbaga sitɛmu kɔrɔw ni kuraw dɛmɛ karti kelen kɔnɔ.
Karti magnɛtiki minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye
Mɔgɔya ni kantigiya kartiw
Hybride Magnétique ani Carte à puce s
Magnétique-stripe jɔyɔrɔ ka kan ka ɲɛfɔ ka kɛɲɛ ni karti dafalen ye, a man kan ka kɛ Film overlay sɛbɛn tigɛbali dɔrɔn ye. Fɛn dilanbaga mago bɛ ja hakɛlama dɔ la min bɛ sɛbɛn ɲɛ cogoya jira, karti labɛncogo, tigɛ taamasiɲɛw, sɛrɛkili sira, yɔrɔjan ka bɔ karti dafalen da la, sɛrɛkili bonya, ani muɲuli.
Finished-card hakɛ ani karti ɲɛsincogo.
Karti hakɛ min labɛnna sɛbɛnfura sɛbɛnnen kelen-kelen bɛɛ kan.
Magnɛtiki sɛrɛkili bonya ni a kulɛri.
Yɔrɔjan ka bɔ sɛrɛkili da la ka taa karti dafalen da la.
Stripe sira ni swipe sira.
HiCo walima LoCo ka jagokɛcogo ɲɛfɔli.
Jiginni ni tigɛ muɲuli wajibiyalen don.
Siginiden panneau, puce, barcode, walima yɔrɔ sɛbɛnnen o yɔrɔ min bɛ sɛrɛkili kɛrɛfɛ.
Magɛnni karti dilanni min bɛ se ka da a kan, o bɛ Film overlay jɛlen ni baarakɛcogo sɛrɛkili fila bɛɛ sɛgɛsɛgɛli de wajibiya. Wallis bɛ se ka poroze kɛrɛnkɛrɛnnenw ka sɛgɛsɛgɛli wajibiyalenw ɲɛnabɔ ka kɛɲɛ ni fɛnw hakɛ ye, karti jɔcogo, komandi hakɛ, ani kiliyanw ka sɔnni sariyaw.
Fɛnɲɛnɛma ni coating-grade sɛgɛsɛgɛli.
Sɛgɛsɛgɛli min bɛ kɛ a janya ni a bonya ni a bonya kan.
Kɛnɛya, sisi, kɛnɛya, ani yɔrɔ saniyacogo sɛgɛsɛgɛli.
Coating uniformité ani coated-side identification.
Bugun, sɔgɔsɔgɔninjɛ, kurukuru, pinɛw, ani dawolo tiɲɛni sɛgɛsɛgɛli.
Kɔrɔbɔli lamination, flatness, ani peel-strength jateminɛ.
HiCo walima LoCo ka kalasi dafalen.
Stripe bonya, a jɔyɔrɔ, a ɲɛsincogo ani a yecogo bɛrɛbɛrɛ.
Stripe nɔrɔli ani a kɛlɛli ka se ka bɔ a la baarakɛcogo la.
Sanfɛla nafamafɛnw, nɔgɔli, karilenw, walima dakunw tɛ kɛ cogo la.
Kodeli ni kalanni sɛgɛsɛgɛli ni minɛnw ye minnu bɛ bɛn ɲɔgɔn ma.
Finished-card swipe, track ani kalanbagaw ka bɛnkan sɛgɛsɛgɛli.
Ni ISO , kiliyan, banki, bolifɛn, jatigila, gɔfɛrɛnaman, walima don-kɔlɔsili wajibiyalen dɔ bɛ sirataama, bɛnkan ka kan ka jateminɛ karti kodɔn dafalen kan ni sɛgɛsɛgɛli fɛɛrɛ bɛnnen ye. Film overlay sɔrɔli raw dɔrɔn tɛ karti dafalenw labatoli sigi sen kan.
Baara kɛ ni karti dafalen kɔrɔbɔli ye walasa ka magnetic-data dɛsɛw faranfasi ka bɔ lamination, layout ani punching defects la sani i ka ban production batch bɛɛ la.
| Taamasiɲɛ | sababu minnu bɛ se ka kɛ | Sɛgɛsɛgɛli ladilikan |
|---|---|---|
| Karti tɛ se ka kodɔn | HiCo/LoCo sigicogo jugu, sira tununen, encodeur bɛnnen walima stripe tiɲɛnen | Sɛbɛnnikɛla suguya, a jagoya, a sira karti ani a ka sɛrɛkili tɛmɛsira lajɛ ni karti ye min bɛ wele ko reference card |
| Karti min bɛ kodɔn, o tɛ se ka kalan | Track jɔyɔrɔ fili, taamasiyɛn barikama, kunnafonidilanw cogoya jugu walima kalanden-kunkolo bɛnbaliya | Aw bɛ track readback, card orientation ani finished-edge stripe dimensions suma ɲɔgɔn na |
| Kalanbagaw ka dɛsɛ minnu bɛ kɛ tuma ni tuma | Abrasive wear, inconsistent stripe signal, edge offset walima nɔgɔ taamasiɲɛw | Aw bɛ stripe surface, encoding amplitude, swipe path ani foro kalanbaga caman sɛgɛsɛgɛ |
| Stripe bɛ wuli lamination kɔfɛ | Sɛbɛnw ɲɛsincogo jugu, funteni lamagacogo walima sɛbɛnni kɔlɔsili dafalen | Aw bɛ CAD dagalen, sɛbɛnni taamasiyɛnw ani lamini kɔfɛ stripe-to-edge position sɛgɛsɛgɛ |
| Magnɛtiki kase bɛ kɔrɔta walima ka a bɔ | Taabolo funteni jugu, nɔrɔli/datugulan min tɛ bɛn walima nɔgɔ | Aw bɛ nɔrɔli sɛgɛsɛgɛliw kɛ ani ka kaseti, enki, furakɛli ani lamini sɛbɛnw lajɛ |
| Bugunw walima delamination | Fiɲɛ min sirilen don, enki furakɛli jugu, nɔgɔ, nɔgɔ walima siribaliya bɛrɛbɛrɛ | Aw bɛ a lajɛ preconditioning, coated-side direction, print furakɛli ani nɛnɛ |
| Karti bow walima curls | Film overlay kulu min tɛ balan, funteni kojugu, degun tɛ kelen ye walima nɛnɛ tɛ min na | Aw bɛ stack janya ni a flakɛ suman; balansi kɛ ɲɛfɛ/kɔfɛ layɛrɛw la |
| RFID baarakɛcogo jugu karti hybride kɔnɔ | Nɛgɛ sɛbɛnni, antɛni tiɲɛni, puce-zone degun kojugu walima karti-stack caman cili | Aw bɛ RF sɛgɛsɛgɛli kɛ ka kɔn lamini ɲɛ ani a kɔfɛ ka fara magnetic readback kan |
Nafa hakɛ, lot min tɔɔrɔla, kalanden/encoder modɛli, lamination recipe ani corrective-action jaabiw sɛbɛn walasa ka segin-ka-bɔnyew kɛ ɲɔgɔn fɛ.
Magɛnni Film overlay ka kan ka kɔrɔbɔ ni sannikɛla ka sɛbɛnfura lakika ye, karti-farikolo-minɛn, lamini-masin, encodeur, kalanbaga, tigɛcogo, ani karti-dilan dafalen sanni ka kɛ jamaba ye.
Aw bɛ sɔn fɛn dilannen, a janya, a sɛrɛkili hakɛ, a bonya, a kulɛri ani a jɔyɔrɔ ja ma.
Kɔrɔbɔ finimugu bɛnkan ni enki sɛbɛnnen yɛrɛ ye.
Aw bɛ lamini funteni, tansiyɔn, waati ani nɛnɛ kɛcogo sɛgɛsɛgɛ.
Aw bɛ sɛrɛkiliw labɛncogo sɛgɛsɛgɛ lamini ni punch kɛlen kɔfɛ.
Track wajibiyalenw bɛɛ kodɔn ni production encoder ye.
Kartiw kalan ni foro kalanbaga laɲinitaw ye.
Aw bɛ a nɔrɔli, a sɔgɔli, a birili, a flakɛli, a kɔrɔbayali ani a minɛcogo jateminɛ.
Aw ye aw bolonɔ bila misali walima fɛɛrɛko ɲɛfɔli sɛbɛn la min dagalen don sani aw ka a dilan kosɛbɛ.
Aw ye aw ka Film overlay fɛnw ci, u bonya, u sɛbɛncogo, u ka sɛrɛkiliw wajibiya, u bonya, u jɔyɔrɔ, u kulɛri, u ka karti kɛcogo, u ka kodɔn modɛli, u ka kalan kɛcogo, u hakɛ jateminɛlen, ani u lase yɔrɔ.
Aw ye Recommandation Technique sɔrɔSanniko ɲɛfɔli ɲuman bɛ baara kɛ ni sariyaw ye minnu bɛ se ka kɔrɔbɔ sanni ka kɛ 'jogo ɲuman' walima 'nɔrɔli barikama dɔrɔn ye.' A’ ye jogo minnu ka kan ka sɛgɛsɛgɛ 100% ani minnu bɛ jateminɛ ni bɛnkan ye misali tacogo fɛ, olu ɲɛfɔ.
| Sɛgɛsɛgɛli fɛn | min laadilen don Sannikɛla ni feerekɛla ka bɛnkansɛbɛn | daliluw |
|---|---|---|
| Kalanso ni tugu-tugu-ɲɔgɔn kɔ | Base resin, coated Film overlay version, stripe grade, stripe feerela ani batch IDw | Lot labels, COA walima fournisseur traceability sɛbɛn i n’a fɔ bɛnkan kɛra cogo min na |
| Filimu janya ni a bonya | Jatebɔlan tɔgɔlama, sumanikɛcogo, muɲuli muɲuli ani sɛbɛn tigɛ muɲuni | Janya karti ani sɛbɛnfura-hakɛ sɛgɛsɛgɛliw |
| Jateminɛ min bɛ kɛ ni bandi ye | Bonya, ɲɛsincogo, sɛrɛkili-ka-karti-dakun hakɛ ani jɔyɔrɔ muɲuli | Ja bolonɔbilalen ani karti dafalenw suman |
| Coating ni lamination jɛɲɔgɔnya | Kɛrɛfɛla dɔnni min datugulen don ani bɛnkan min kɛra peel/edge-bond test kan, o bɛ kɛ representative printed core kan | Misali ni sɛgɛsɛgɛli rapɔɔri min dabɔra |
| Yecogo yecogo | Sɔgɔsɔgɔninjɛ, buguri, bugun, sɛrɛkili kari, sisi ani nɔgɔli sariyaw | Sɛgɛsɛgɛli misaliw ani sɔnni sariya yelen |
| Kodeli / kalan seginni | Track nimɔrɔw, data format, encoder settings, pass rate ani kalanden modeli dantigɛlenw | Baarakɛcogo kalanni sɛbɛnw kan karti dafalenw kan |
| A bɛ se ka mɛn | Abrasion, bending, humidity walima kɔrɔya teliya yɔrɔ minnu na a ka kan ka kɛ bɛnkansɛbɛn kɔnɔ | Kɔrɔbɔli jaabiw ni sɛgɛsɛgɛli cogoya kɛrɛnkɛrɛnnenw ye |
| Foroko minnu bɛ kɛ | Lakanali ka bɔ buguri la, jiriw sɔgɔli, u kɔrɔta, funteni kojugu ani magɛnni | Fotow pake, lot label ani shipping record |
Kɛrɛnkɛrɛnnenya la, dantigɛliw ni sɔnni dantigɛliw ka kan ka sigi senkan ni dilanbaga ye, ka sɛgɛsɛgɛli kɛ ni fɛn dilanni misaliw ye minnu bɛ cidenw jira. Seereya si tɛ jira dɔrɔn ni magɛnni kalasi sugandili ye.
Magɛnni sɛrɛkili Film overlay ka kan ka lakana ka bɔ ji, buguri, sanfɛla sɔgɔli, kuruli, dakun tiɲɛni, ani magɛnni bɔli la min tɛ kɔlɔsi a marali ni a ta waati. Jagokɛlaw ka pakew bɛ se ka ladilan ka kɛɲɛ ni sɛbɛn hakɛ ye, ka kɛɲɛ ni komandi hakɛ ye, ka taa yɔrɔ min na, ani ka kɛɲɛ ni u minɛcogo wajibiyalenw ye.
Aw bɛ kɔnɔnafilimu walima PE sirilan saniya.
Kraft papiye min bɛ se ka ji minɛ walima lakanani foroko datugulen.
Kartɔn, kɛsu barikama, jiri kɛsu, walima palɛti min bɛ kɛ ka taa jamana wɛrɛw la.
Nkɔni ni dawolo lakanani walasa ka dɔ bɔ sɛbɛnw bɔgɔbɔli la.
Lot nimɔrɔ, fɛnw hakɛ, coated-side ani stripe-direction labels.
Label minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, pakew lisi ani cikan taamasiyɛnw.
Export Packaging lakananenw
Duniya Seleke Naani ka kurunbokari min bɛ wele ko Palletized
Wallis bɛ karti fɛnw di karti dilannikɛlaw ma, sɛbɛnnikɛlaw ma, karti hakilitigiw ma, fɛn caman tigɛlikɛlaw ma, u tilabagaw ma, ani OEM kiliyanw ma. An bɛ dɛmɛ don porozɛw ma minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, minnu bɛ wele ko magnetic stripe Film overlay ka bɔ fɛnsɛbɛnniw lajɛli la ani misaliw la, ka tɛmɛn fɛn caman dilanni ni u lasecogo kan.
A ka ca ni san 15 ye plastiki sɛbɛnw ni kartiw dilanni na.
Fɛn dilanni yɔrɔ caman ani fɛn dilanni seko min bɛ se ka sɛgɛsɛgɛ.
PVC , PET , PETG , PC , datugulen Film overlay , koori sɛbɛn, ani kariti-inlay-sɛnɛfɛnw.
HiCo ni LoCo magnɛti-stripe customization.
A janya, a bonya, a sɛrɛkili jɔyɔrɔ, a sanfɛla ani a dacogo min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
Sample ani pilot-order dɛmɛni lamination ni encoding sɛgɛsɛgɛli kama.
Foroko minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, sɛbɛnw, cikan taamasiyɛnw, ani jamana kɔkan sɛbɛnw.
Wallis ka Ɲɛjirali
Duniya B2B Kunnafonidila
Wallis ka izini
Aw ye aw ka fɛnw ci Wallis ma, u janya, u sɛbɛnfura hakɛ, u ka sɛrɛkiliw wajibiya, u ka sɛrɛkili bonya, u ka sɛrɛkili jɔyɔrɔ, u ka karti tali, u ka encodeur, u kalanbaga, u ka san hakɛ, ani u ka misali wajibiyalenw.
Sɔngɔko ni misaliw ɲiniWalasa ka fɛɛrɛbɔ teliya sɔrɔ, aw bɛ kunnafonisɛbɛn kelen ci min dabɔra, min kɔnɔ, karti ja dafalen, basigifɛnw, filimu janya, HiCo/LoCo hakɛ, sɛrɛkili bonya, sɛrɛkili ni dakun coordinates, siraw wajibiyalenw, karti hakɛ, sɛbɛnnikɛlan, laminatɛri, kodɔn minɛnw ani san ɲinini jateminɛlenw bɛ sɔrɔ.
Sannikɛlaw minnu mago bɛ karti gansan lakanani na ni magnɛti stripe intégré tɛ , Wallis fana bɛ fɛnw di PVC Film overlay filimu min bɛ kɛ ka karti lamini . Sannikɛlaw minnu bɛ suguya caman sɔrɔ filimu kelen-kelen magɛnni sɛrɛkiliw ni fɛn suganditaw , aw ye sɛbɛn ɲɛ PVC , PC ani PET magɛnni sɛrɛkili filimuw.
Sannikɛlaw minnu ka porozɛ RFID walima NFC ka kan ka karti inlay ni chip layout fana di. Aw bɛ magnetic ni contactless baarakɛcogo sɛgɛsɛgɛ ɲɔgɔn fɛ lamination laban ni karti punching kɔfɛ.
A bɛ Kɛ kɛnɛma-yɔrɔ lakanani ye ani magɛnni data-yɔrɔ ye plastiki karti lamininenw na. Film overlay bɛ karti kunnafoni sɛbɛnnenw lakana ka sɔrɔ sɛrɛkili jɛlen bɛ magɛnni kodɔn ni kalanni dɛmɛ minnu bɛ bɛn ɲɔgɔn ma.
LoCo sɛrɛkiliw bɛ magɛnni fanga dɔgɔya de wajibiya walasa ka kodɔn ani u bɛ kɛ ka caya kartiw kama minnu bɛ sɛrɛkili surun walima minnu bɛ sɛbɛn kokura tuma caman na. HiCo sɛrɛkiliw bɛ kodɔn fanga barikama de wajibiya ani ka se ka magɛnni bɔli kɛ kasaara la.
Awɔ. Wallis bɛ se ka baro kɛ Oe LoCo 300 ani Oe 2750 walima Oe HiCo 4000 suganditaw kan. A laban sɔrɔli ani a bɛnnen don, o bɛ bɔ fɛn dilannen, sɛrɛkili feerela, kulɛri, bonya, jɔyɔrɔ, hakɛ, ani poroze wajibiyalenw de la.
Awɔ. Sɛrɛkili bonya, a jɔyɔrɔ, a sira, a kulɛri, a jagoya, ani a yɔrɔ janya ka bɔ karti dafalen da la, olu bɛ se ka ladilan ka kɛɲɛ ni ja fɛɛrɛbɔlen ye min dabɔra.
Awɔ. Wallis bɛ se ka A4, A3, ani sɛbɛnw hakɛw di minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. A labɛncogo ka kan ka bɛn sannikɛla ka sɛbɛnni kɛcogo ma, karti bilacogo, lamination plate ani punch kɛcogo.
Fɛn minnu bɛ se ka sugandi, olu bɛ se ka kɛ PVC , PET , PETG , ani polikarbonati ye. Fɛn min bɛnnen don, o bɛ bɔ karti kɔnɔna na, sɛbɛnni kɛcogo la, lamination funteni na, karti ɲɛnamaya wajibiyalen na, ani a kɛcogo la min bɛ kɛ ka kɛɲɛ ni mɔgɔ yɛrɛ ta ye.
Ɔwɔ, ni Film overlay dacogo, tintin sɛbɛnnen, karti-kɔnɔfɛnw, ani lamini kɛcogo bɛ bɛn. Fɛn min datugulen don, o ka kan ka ɲɛsin sɛbɛnfura walima a kɔnɔna labɛnna ma, wa a ka kan ka misaliw sɛgɛsɛgɛ sani u ka kɛ caman ye.
Ayi, magnɛti sɛrɛkili ye fɔlɔ kunnafonidilan ye min bɛ se ka kalan masin fɛ. Lakanali bɛ bɔ kunnafonidilanw na minnu bɛ kodɔn, kɔkanna sitɛmu, kalanbagaw kɔlɔsili, seereyaw ɲɛnabɔcogo, ani lakana fɛɛrɛ wɛrɛw minnu bɛ fara puwɛnti, olografu, sɛbɛnnen walima laser-personnalisé kan.
Awɔ. Magnɛtiki Film overlay bɛ se ka kɛ karti hybride dɔ ye min kɔnɔ, contact puce, RFID walima NFC inlay, barcode, QR code, signature panel, walima karti baarakɛcogo wɛrɛ bɛ min kɔnɔ. Layɛrɛ dafalen jɔcogo ka kan ka kɔrɔbɔ ni a sirilen don, a flakɛ, a ka karti janya, ani a kodɔncogo la.
Nin fɛn in dabɔra fɔlɔ baara kama karti dilanni waati, sani a ka lamini ani ka punch kɛ. Ni i y’a fara karti kan min banna kaban, a ka c’a la, o tɛ bɛn karti magɛnni lamininen ka ɲɛ, wa o bɛ se ka nɔ bila karti janya la, a bonya la, a flakɛli la, ani a kalanbaga ka bɛncogo la.
Awɔ. A ka ɲi kosɛbɛ ka misali sɛgɛsɛgɛli kɛ walasa ka finimugu bɛnkan, sɛrɛkili jɔyɔrɔ, lamini sirili, punch tiɲɛni, kodeli, sira kalanni, sanfɛla cogoya, ani karti dafalen baarakɛcogo sɛgɛsɛgɛ.
Aw ye Film overlay fɛn dilannenw, u bonya, u sɛbɛnfura hakɛ, HiCo walima LoCo ɲɛfɔli, fanga, sɛrɛkili bonya, sɛrɛkili kulɛri, sɛrɛkili-yɔrɔ ja, dacogo wajibiyalen, karti kɛli, sɛbɛnni kɛcogo, hakɛ jateminɛlen, pakew, ani taayɔrɔ di.
Aw bɛ sɛbɛnfura minnu datugulen don u foroko fɔlɔ kɔnɔ, olu mara yɔrɔ saniyalen na, yɔrɔ jalen na, yɔrɔ min funteni bɛ se ka kɔlɔsi. Aw bɛ u tanga ji, buguri, kurukuruni, sɔgɔsɔgɔninjɛ, magɛnni barikamaw ma, tile yeelen tilennen ma ani funteni ma min tɛ se ka kunbɛn.
Magɛnni sɛrɛkili Film overlay ye plastiki lakanani sɛbɛn ye min kɔnɔ magɛnni sɛrɛkili bɛ don a la lamini na. Magnétique stripe transfer foil ye stripe fɛn danfaralen ye min bɛ kɛ transfer walima stamping baara latigɛlen na. O fɛn fila bɛ baara kɛ ni baarakɛcogo caman tigɛli ye minnu tɛ kelen ye.
Bonya i n’a fɔ 8,4mm ye sira fila jɔli dɔw la ani 12,7mm ye sira saba jɔli caman na, olu ye sɔrɔyɔrɔw ye. Aw bɛ sira jateminɛ tigitigi, kalanden kunkolo ani karti dafalenw labɛncogo dafa sanni aw ka bonya sugandi ka bɔ sira jate dɔrɔn na.
Ayi ISO /IEC 7811-6 bɛ baarakɛcogo wajibiyalenw ɲɛfɔ ka ɲɛsin magɛnni sɛrɛkili karti dafalen ma min fanga ka bon, a tɛ Oe hakɛ wajibiyalen kelen ye. Labatoli bɛ bɔ karti jɔcogo dafalen na, a kodɔncogo ani a sɛgɛsɛgɛli jaabiw la.
A tɛ kɛ wajibi ye. Encodeur dɔw tɛ se ka magnetic field sɛbɛn min wajibiyalen don HiCo grades fɛ. Aw bɛ sɛbɛnnikɛla ka fɛn ɲɛfɔlenw dafa ani ka karti dɔ kɔrɔbɔ min dagalen don sani aw ka komandi kɛ.
Aw bɛ sɛrɛkili bonya, a ɲɛsincogo ani a yɔrɔ janya ka bɔ karti dafalen da la, o fɔ CAD kɔnɔ. Aw bɛ sɔn barokun fɔlɔ lamininen ni punched ma, o kɔ aw bɛ sɛbɛnni ni baarakɛminɛnw jiginni kɔlɔsi a dilanni senfɛ.
Aw bɛ siraw wajibiyalenw di, kunnafonidilanw sigicogo, enkode modɛli, magɛnni hakɛ, karti ɲɛsincogo, foro kalanni laɲinitaw ani kalanko sariyaw. Donanw cogoya ni doncogo yamaruyaw bɛ sigi karti sitɛmu fɛ, a tɛ sigi Film overlay dɔrɔn fɛ.
Aw bɛ kɔn ka bɛnkan sɔrɔ puce walima stripe lot references kan yɔrɔ minnu na a bɛnnen don, Film overlay material lot, thickness checks, stripe-position results, sampled lamination tests ani finished-card readback. Sɛbɛnw hakɛ ka kan ka ɲɛfɔ sannifeere sɛbɛn kɔnɔ.
Sɛgɛsɛgɛli min dabɔra, o ka kan ka fɛnw ni finimugu hakɛ jira, karti dafalenw kulu, sɛrɛkiliw ɲɛsincogo n’u jɔyɔrɔ, a sanfɛla cogoya, peel baarakɛcogo ani kodɔn/kalan kɛcogo ɲuman minɛn laɲininenw kan.
