Ka daɲɛw Labɔ Laser Engraving fɛ

Daɲɛw dilanni ni mɔgɔya kɛcogo siratigɛ la, laser ja bɔra kɛnɛ kan i n’a fɔ fɛɛrɛ barikama. A b’a to u bɛ se ka misali gɛlɛnw, sɛbɛnniw ani jaw sɛbɛn tigitigi fɛn suguya caman kan. Walasa ka ɲɛtaa kɛrɛnkɛrɛnnenw sɔrɔ, ja dilancogo sugandili nafa ka bon kosɛbɛ. Sugandili kabakoma dɔ min bɛ bɔ kɛnɛ kan, o ye Laserable Polycarbonate Overlay Film ye.

Faamuyali Laserable Polikarbonati Overlay Film

Laserable Polycarbonate Overlay Film ye filimu kɛrɛnkɛrɛnnen ye min dilannen don walasa ka laser ja dilanni masinw ka funteni jugumanba ni u ka tiɲɛni muɲu. A dilannen don ni polikarɔbɔnati ye, o ye fɛn ye min bɛ mɛn ani min bɛ se ka kɛ fɛn caman na, min lakodɔnnen don a ka jɛya danma na ani a ka se ka fɛnw gosi. Nin filimu in dabɔra walasa ka lakanalan dɔ di ka sɔrɔ ka laser fanga dɛmɛ ka tɛmɛ a fɛ ani ka ja caman dilan.

Minɛ	PC
A ka bon kosɛbɛ	0.04MM-0.15MM,Ka kɛɲɛ ni mɔgɔw sago ye
Kundama	A4/A3/Ka kɛɲɛ ni mɔgɔw sago ye wdfl
Mɔdɛli	Overlay min bɛ datugu
	Overlay min tɛ datugu
	Laserable Overlay (dakun min bɛ se ka kɛ ni laser ye).
	Overlay min bɛ datugu ni barika ye
Overlay min bɛ kɛ ni magnɛti ye	HICO/LOCO/300OE,600OE,2750OE,3000OE

 

Nafa minnu bɛ sɔrɔ Laserable Polycarbonate Overlay Film la

A bɛ se ka kɛ fɛn caman na : . 

Laserable Polycarbonate Overlay Film bɛ se ka kɛ ni fɛn caman ye, nɛgɛw, plastikiw, jiriw, gilasiw ani fɛn wɛrɛw. O fɛn caman kɛcogo b’a kɛ sugandili ɲuman ye baara suguya caman na.

A muɲuli : 1 . 

Polikarbonati barika ka bon, o b’a to jalenw bɛ to u cogo la waati kɔnɔ, hali ni u bɛ se ka nɔba bila yɔrɔ minnu na.

Kɔrɔfɔli : 1 . 

Filimu in ka kɛnɛyako danmadɔ b’a to a jukɔrɔla yɔrɔ ni ja minnu bɛ ye, olu bɛ se ka ye ka jɛya, o bɛ dɔ fara fɛn laban in cɛɲi kan.

Tiɲɛni : 1 . 

Laser ja ni polikarbonati dacogo filimu bɛ se ka dilancogo gɛlɛnw dilan ni tiɲɛni kabakoma ye, ka hali fɛn fitininw minɛ.

Polycarbonate non laserable Overlay film dabɔra PC Card layini fɔlɔ kama min mago tɛ ja ja la.

 

 PC nan laserable Overlay Film fanga ka ɲi kosɛbɛ ani a bɛ se ka sɛgɛn, a bɛ se ka funteni caman kɛlɛ, nin modɛli in tɛ laser graphic engraving dɛmɛ.

• A bɛ baara kɛ ka ɲɛ funteni caman na, a kulɛri tɛ Changé ni encre fluorescent ye.

• A bɛ se ka sɔgɔsɔgɔ, a bɛ kartiw si janya.

• Sigida laminiko ɲuman tɛ, furaji walima gazi si tɛ bɔ

• Pls kɔlɔsi a ye non-laserable suguya ye.

PC Overlay hakɛ basigilen:

• 0,05/ 0,07/ 0,1mm *295*365mm ye

• 0,05/ 0,07/ 0,1mm *295*485mm ye

• 0,05/ 0,07/ 0,1mm *505*590mm

 

Laserable Polikarbonati Overlay Film baarakɛcogo

Laserable Polycarbonate Overlay Film bɛ baara sɔrɔ izini caman kɔnɔ ani daɲɛw dilanni porozɛ caman na. Baarakɛcogo kɛrɛnkɛrɛnnen dɔw ye:

Siginidenw ni jiralanw : 

Aw bɛ taamasiyɛnw, tɔgɔsɛbɛnw ani fɛnw jira minnu bɛ mɔgɔ ɲɛ minɛ, aw bɛ olu dilan ni polikarbonati filimu ye min jalen don ni laser ye.

Mɔgɔya : 1 . 

Aw bɛ aw yɛrɛ ka magan dɔ fara kadow, laadalakow ani hakilijiginfɛnw kan, aw kɛtɔ ka tɔgɔw, donw walima cikan kɛrɛnkɛrɛnnenw ja.

Elektɔriki : 1 . 

Aw bɛ ɛntɛrinɛti minɛnw cogoya ɲɛ ni aw ye polikarbonati filimu min jalen don ni laser ye, aw bɛ o don kunnafonidilanw kɔnɔ, klaviyetiw kɔnɔ, walima u kɔnɔna na.

Architecture Design : Bamako : 

Aw bɛ fɛn dilanni misaliw, pankurunw masirilenw ani yeelenbɔlanw nafa ni ja gɛlɛnw ye minnu jalen don ni laser ye polikarbonati filimu kan.

Industriw ka baarakɛcogo : . 

Aw bɛ baara kɛ ni polikarbonati filimu ye min jalen don ni laser ye walasa ka taamasiyɛnw, taamasiyɛnw ani fɛnw datugu iziniw kɔnɔ.

Fɛn dilannenw foroko & taa ni u ye

Foroko minnu bɛ kɛ ka kɛɲɛ ni sariya ye, olu dɔw ye:

• PE filimu lakanani anti-statique

• Foroko minnu tɛ ji sɔrɔ

• Palɛti walima kɛsu stacking

• Labelling custom walasa ka inventory teliya

Mun na an bɛ Wallis Plastic sugandi?

1. Fɛn minnu bɛ kɛ ka caya ka ɲɛsin mago suguya caman ma
   An kɛrɛnkɛrɛnnen don plastiki furakɛlicogo ɲumanw na, ka PVC/PET/PETG/PC sɛbɛnw, filimuw, kartiw jukɔrɔlafɛnw, ani fɛnw dilanni baara minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛɛ di. An ka fɛn dilannenw bɛ mɛn, u bɛ yeelen bɔ, u tɛ se ka UV kɛlɛ, u baara ka nɔgɔn, wa u bɛ se ka baara kɛ kokura, u bɛ tugu jogoɲini sariya gɛlɛnw kɔ. A bɛnnen don pakew dilanni ma, taamasiyɛnw dilanni ma, karti dilanni ma, masirili ma ani fɛn wɛrɛw ma, an ka dannaya bɛ sugu la.

   
   

2. Duniya bɛɛ ka kiliyanw ka dannaya
   Ni fɛnw ye minnu musaka ka dɔgɔ ani baarakɛcogo min bɛ jaabi di, an ye jɛɲɔgɔnya kuntaalajanw sigi ni kiliyanw ye diɲɛ fan bɛɛ. San caman suguya dɔnni b’an ka cɛsiri jira ka ɲɛsin ɲɛtaa ma, k’a to i ka da i yɛrɛ la an sugandili la.

   
   

3. Baarakɛlaw ka jɛkulu min bɛ dɛmɛ don ni fɛn ye min tɛ fɛn tiɲɛ
   An ka jɛkulu min bɛ se kosɛbɛ, o bɛ dɔnniya di laban na ka taa a laban na—k’a ta ladilikanw na ani u dilanni na min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka se fɛn dilanni, fɛnw lasecogo ani feereli kɔfɛ ladonni ma. Izini 7 minnu bɛ taa ɲɛ ani baarakɛcogo ɲumanw dɛmɛni na, an b’a to fɛn caman tigɛli teliya ani furaw bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, k’a to i ka sannifeere taama ka ɲɛ ani gɛlɛya tɛ min na.

   
   

   
   

   Wallis Ekipu

   Wallis ka Distinguished kliyanw

   
   

   Wallis ka izini

❓ Ɲininkaliw 

1. Yala Laserable Polycarbonate Overlay Film bɛ se ka kɛ yɔrɔw kan minnu kurulen don wa?

Ɔwɔ, Laserable Polycarbonate Overlay Film bɛ se ka bɛn yɔrɔw ma minnu kurulen don, o bɛ kɛ sababu ye ka laser ja kɛ fɛnw ni fɛn caman kan.

2. Yala Laserable Polycarbonate Overlay Film bɛ se ka UV kɛlɛ wa?

Ɔwɔ, a ka c’a la, filimu min bɛ da polikarbonati kan, o bɛ UV kɛlɛcogo ɲuman di, o b’a to dilan minnu jalen don, olu bɛ to ɲɛnamaya la, wa u tɛ nɔ bila u la ni u bilara tile yeelen na waati jan kɔnɔ.

3. Yala Laserable Polycarbonate Overlay Film bɛ se ka kɛ kɛnɛma wa?

A bɛ ten! Polikarbonati bɛ mɛn cogo min na ani a ka se ka fɛnw kɛlɛ, o b’a to a bɛnnen don kɛnɛma baara ma, taamasiyɛnw ni fɛn dilanni fana sen bɛ o la.

4. Laserable Polycarbonate Overlay Film ka janya jumɛnw bɛ sɔrɔ?

Laserable Polycarbonate Overlay Film bɛ sɔrɔ a bonya suguya caman na, k’a ta filimu finmanw na walasa ka ja nɔgɔlenw kɛ ka taa a bila sugandiliw la minnu ka bon walasa ka muɲuli sabati.