|
Wallis -PVC ƒe Agbalẽ
Wallis ye nye esia
PVC ƒe Agbalẽvi
| Amadede: | |
|---|---|
| Agbɔsɔsɔ: | |
Wallis supplies high quality white PVC foam board , si woyɔna hã be kekeɖenudɔ PVC agbalẽvi, na dijitaal tata, screen tata, dzesiwo, POP ɖeɖefiawo, ɖeɖefia nɔnɔmetatawo, ememe atsyɔ̃ɖoɖo, fabrication kple asitsatsa bubuwo. Eƒe wɔwɔme sesẽ si le bɔbɔe kple matte ɣi ƒe anyigba si le gbadzaa la na PVC foam board nye nusi woate ŋu azã na agbalẽtalawo, dzesiwɔlawo, ɖeɖefiawɔlawo, fabricators kple OEM nuƒlelawo.
Ne wotsɔe sɔ kple PVC gbadzɛ sesẽ la, PVC si me futukpɔ le ɖea nuawo ƒe kpekpeme dzi kpɔtɔna esime wòléa sesẽ si ŋu viɖe le me ɖe asi na nukpɔkpɔ kple ewɔwɔ ƒe dɔ geɖe. White PVC foam board hã naa agbalẽtata ƒe megbenya dzadzɛ na nɔnɔmetatawo, nuŋɔŋlɔwo, fotowo kple boblododo nutatawo.
Wallis ateŋu aƒo nu tso titrime vovovowo, kpekpeme, agbalẽ ƒe lolome, anyigba ƒe nudidiwo, nutsyɔtsyɔ, lãɖeɖe kple bablawo ŋu le wò dɔa nu. Le gota, xɔtuɖaŋu alo dzo ƒe dɔwɔwɔ gome la, ele be woaɖo kpe dzeside kple mɔ̃ɖaŋununya ƒe dzidzenu si wobia dzi hafi abia.
PVC foam board nye aŋe si ƒe kpekpeme le bɔbɔe si wotsɔ polyvinyl chloride wɔe to foaming mɔnu si naa lãmenugbagbeviwo ƒe ememe wɔwɔme wɔna. Wogblɔna le afisiafi hã be enye PVC agbalẽ si keke ta, PVC board si me futukpɔ le alo cellular PVC gbadzɛ.
Futukpɔ ƒe xɔtunua ɖea kpekpeme dzi kpɔtɔna ne wotsɔe sɔ kple aŋe sesẽ si sɔ esime wòléa sesẽ si sɔ na dzesi geɖe, nukpɔkpɔwo, nɔnɔmetata siwo wota kple akpa siwo wowɔ. Anyigba ɣi si le gbadzaa hã nana nusi wotsɔ wɔe la ɖea vi ŋutɔ ne ehiã be woawɔ nukpɔkpɔ ƒe vovototo gã kple nɔnɔmetatawo gbugbɔgawɔ dzadzɛ.
Mele be woatɔtɔ PVC foam board kple pepa-mo foam core presentation board o. PVC foam board nye plastic substrate le eƒe wɔwɔme katã me, si naa tsi ƒe tsitretsitsi, mɔ̃ kple fabrication ƒe nɔnɔme vovovowoe.
Wallis ate ŋu ana PVC foam board ƒe nɔnɔme vovovowo le agbalẽtata, boblododo, ɖeɖefia, xɔmenuwo kple wɔwɔme ƒe nudidiwo nu. Asixɔxɔ siwo le ete la tsi tre ɖi na Wallis PVC foam board tiatia siwo bɔ; ele be woaɖo kpe eƒe anyinɔnɔ mamlɛtɔ dzi na dzeside si wobia kple nudɔdɔ ƒe agbɔsɔsɔ.
| Nu si wowɔ | White PVC Foam Board / PVC ƒe agbalẽ si keke ta |
| Nu | PVC si wotsɔ futukpɔ wɔe |
| Amadede | Ɣi; woate ŋu adzro amadede siwo wowɔ ɖe ɖoɖo nu me na dɔ siwo sɔ |
| Titrime ƒe didime si bɔ | Anɔ abe milimeta 1–35 ene le Wallis PVC foam board ƒe didimewo katã dzi; ɖo kpe edzi be dzesi si nètia la li na |
| Density Range si bɔ | Anɔ abe 0.3–0.9 g/cm⊃3 ene; le eƒe titrime, eƒe sesẽme kple eƒe dɔwɔwɔ ƒe nudidiwo nu |
| Agbalẽvi ƒe Agbɔsɔsɔme Siwo Wozãna | 1220 × 2440 mm, 1560 × 3050 mm, 2050 × 3050 mm kple didime siwo wowɔ ɖe ɖoɖo nu ne woɖo kpe ewɔwɔ dzi |
| Ŋkume | Matte ɣie si le gbadzaa; woate ŋu aƒo nu tso dɔa ƒe anyigbadzinudidi bubu siwo ku ɖe dɔa koŋ ŋu la ŋu |
| Masking Film si Wotsɔ tsyɔa Nui | Woate ŋu adzro akpa ɖeka alo akpa eve ƒe ametakpɔnu ƒe ametakpɔnu ŋu le asisiwo ƒe nudidiwo nu |
| Agbalẽtata | Digitál agbalẽtata, UV tata, screen printing kple agbalẽtata ƒe ɖoɖo bubu siwo sɔ siwo woate ŋu ado ink kple dɔwɔnuwo kpɔ |
| Awuwɔwɔ | Lãɖeɖe, mɔɖeɖe, tomekuku, kadodo, nutata, lamination kple dɔ bubu aɖewo koŋ wɔwɔ |
| Dɔbiagbalẽviwo | Dzesiwo, agbalẽtata, POP ɖeɖefiawo, ɖeɖefiawo, xɔmenuwo ƒe atsyɔ̃ɖoɖo, xɔmenuwo ƒe akpa aɖewo, kpɔɖeŋuwo kple wo wɔwɔ |
| Trɔ asi le eŋu | Titrime, kpekpeme, lolome, amadede, anyigba, nutsyɔnu, lãɖeɖe kple babla |
Anyigba ɣi dzadzɛ naa megbenya si medea akpa aɖeke dzi o na amadede siwo wota, fotowo, nuŋɔŋlɔwo kple dzesidenuwo. Esia ɖea vi ŋutɔ na asitsatsa ƒe dzesiwo, ɖeɖefia ƒe nɔnɔmetatawo kple asitsaƒewo ƒe ɖeɖefia siwo me nukpɔkpɔ ƒe ɖekawɔwɔ le vevie le.
Matte ƒe anyigba si le gbadzaa ate ŋu akpe ɖe ame ŋu be wòaɖe keklẽ si hea susu ɖa dzi akpɔtɔ esime wòle gɔmeɖoanyi si mewɔa tɔtrɔ o na agbalẽtata, nutata, vinyl zazã kple lamination.
Ememe xɔtuɖoɖo si me futukpɔ le la na PVC si keke ta la le bɔbɔe ŋutɔ wu plastik-kpa sesẽ si sɔ kplii, si ate ŋu ana dzesi gãwo kple nukpɔkpɔ ƒe akpatawo zazã, wo tsɔtsɔ yi teƒe bubuwo kple wo dede nanɔ bɔbɔe.
Titrime kple kpekpeme si sɔ ate ŋu ana panel ƒe sesẽme si ŋu viɖe le na nɔnɔmetata siwo le wo ɖokui si, asitsaƒewo ƒe ɖeɖefiawo kple didime ƒe dzesiwo. Ele be woatia nɔnɔme nyuitɔ le panel ƒe lolome, kpekpeɖeŋu ƒe dometsotso kple eɖoɖo ƒe mɔnu nu.
PVC foam board ƒoa kpekpeme si dzi ɖe kpɔtɔ kple sesẽ si ŋu viɖe le nu ƒu, si wɔnɛ be woate ŋu atsɔ ʋuƒo gãwo ahawɔ wo bɔbɔe wu nu sesẽ geɖe siwo kpekpe wu.
PVC mexɔa tsi abe pepa alo ati siwo ŋu womewɔ atike ɖo o ene o. Esia na be PVC foam board ɣi ɖea vi na xɔmenuwo, dzesiwo, nukpɔkpɔ ƒe akpawo kple dɔ bubu siwo me tsi ƒe tsitretsitsi le vevie le.
Woate ŋu awɔ dɔ tso PVC foam board ŋu to lãɖeɖe, mɔfiafia, tomekuku kple ewɔwɔ dɔwɔnu siwo sɔ zazã me. Ele be woatrɔ asi le dɔwɔnu tiatia, nuɖuɖu ƒe duƒuƒu kple lãɖeɖe ƒe nɔnɔmewo ŋu ɖe ʋuƒoa ƒe titrime kple kpekpeme nu hena go siwo le dzadzɛ.
Wotiaa PVC foam board ɣi zi geɖe abe substrate sesẽ ene na digital graphics tẽ, screen printing, vinyl graphics, nutata kple laminated nɔnɔmetatawo. Ele be woadoe kpɔ be esɔ kple ink, agbalẽtamɔ̃ kple nuwuwu ƒe ɖoɖo ŋutɔŋutɔ hafi woawɔe le agbɔsɔsɔ gã me.
Board ƒe titrime kple kpekpeme vovovowo ɖea mɔ na nuƒlelawo be woada asɔ le kpekpeme, sesẽme, mɔ̃ ƒe dɔwɔwɔ, screw alo fastener ƒe nudidiwo kple nuwo ƒe asi le dɔwɔwɔ si wowu enu nu.
Titrime nye nuƒle ƒe nɔnɔme vevitɔwo dometɔ ɖeka elabena ekpɔa ŋusẽ ɖe panel rigidity, kpekpeme, fabrication kple final installation dzi tẽ. Titrime si sɔ nɔ te ɖe akpa si wowɔ vɔ ƒe lolome kple alesi woalé ʋuƒoa ɖe te dzi.
Ʋuƒo tsɛwo ɖea vi na nɔnɔmetata siwo wota siwo ƒe kpekpeme le bɔbɔe, megbegbalẽviwo, nɔnɔmetatawo wɔwɔ, nukpɔkpɔ siwo wotu ɖe wo dzi kple dɔwɔwɔ siwo me asitɔtrɔ le nɔnɔmewo ŋu kple kpekpeme sue le vevie wu xɔtuɖaŋu ƒe sesẽ.
Wobua dzidzenu siwo le titina zi geɖe hena dzesiwo, POP ɖeɖefiawo, ɖeɖefia ƒe akpawo, didime ƒe nɔnɔmetatawo kple nuwɔwɔ le mɔ gbadza nu afisi wòhiã be woada asɔ le sesẽme kple kpekpeme si woate ŋu akpɔ nyuie me.
Woate ŋu atia ʋuƒo siwo le kpekpem wu na didime ŋɔŋlɔdzesiwo, xɔmenuwo ƒe akpawo, kpekpe siwo wowɔ kple dɔ siwo bia be woawɔ nu sesẽ bubuwo alo woatsɔ nusiwo wotsɔ wɔe ƒe goglome.
Dzesi eve siwo ƒe didime sɔ ate ŋu abia be board ƒe titrime nato vovo le ya ƒe ƒoƒo, mɔnu si wotsɔ ɖoa wo dzi, dometsotso si le wo dzi alo woƒe dɔwɔwɔ ƒe agbenɔƒe si wokpɔ mɔ na ta. Na Wallis nakpɔ panel ƒe didime siwo wowu enu kple eɖoɖo ƒe mɔnu ne èle nusiwo woatsɔ awɔ dɔe ƒe aɖaŋuɖoɖowo biam.
Density kpɔa ŋusẽ ɖe board ƒe kpekpeme, rigidity, anyigba ƒe ŋusẽ, machining nuwɔna kple mɔ̃ɖaŋu fastening dɔwɔwɔ. Eyata density tiatia le vevie ŋutɔ na converters kple fabricators tsɔ wu be agbalẽtaƒewo ɖeɖeko.
Lower-density PVC foam board ɖea kpekpeme dzi kpɔtɔna eye ate ŋu asɔ na ɣeyiɣi kpui aɖe ƒe ɖeɖefiawo, agbalẽtata kple dɔ bubu siwo me wo ŋudɔwɔwɔ bɔbɔe kple nusiwo wozãna le gazazã me nye nu vevitɔwo.
Zi geɖe la, nusiwo ƒe kpekpeme lolo wu naa xɔtuɖoɖo si sesẽ wu eye woate ŋu alɔ̃e wu na mɔfiame, mɔ̃ɖaŋunuwo wɔwɔ, xɔmenuwo ƒe akpawo kple dɔwɔwɔ siwo me woate ŋu awɔ nu geɖe le wu.
Titrime ɖeɖe meɖe alesi PVC foam board ase le eɖokui me alo awɔ dɔe me bliboe o. Le nuwo wɔwɔ ƒe dɔ veviwo gome la, ele be woada woƒe titrime, woƒe kpekpeme kple woƒe ŋutilã me kpɔɖeŋuwo kpɔ ɖekae.
Woate ŋu azã PVC foam board ɣi si sɔ kple UV flatbed agbalẽtamɔ̃wo na dzesiwo, nɔnɔmetatawo, ɖeɖefia ƒe akpawo kple ɖeɖefiadɔwo. Ele be woatsɔ dɔwɔnu siwo woɖo be woawɔe atsɔ aɖo kpe ink ƒe ƒoƒo, eƒe dɔyɔyɔ kple eƒe anyigba ƒe dzadzɛnyenye dzi.
Screen printing ɖea vi na nɔnɔmetatawo wɔwɔ enuenu, teƒeteƒewo ƒe amadedewo, dɔwɔƒewo ƒe dzesidede kple ewɔwɔ ƒe duƒuƒu gãwo. Ele be woatsɔ ink ƒe atikewɔwɔ kple eƒe ƒuƒu alo eƒe dɔyɔyɔ ƒe nɔnɔmewo asɔ kple PVC ƒe anyigba.
Woate ŋu atsɔ vinyl ŋɔŋlɔdzesiwo kple nɔnɔmetata siwo wota siwo wotsɔ léa nu ɖe nu ŋu la awɔ PVC foam board ƒe anyigba dzadzɛ. Ele be woado adhesive ƒe ɖekawɔwɔ kple subɔsubɔ ƒe nɔnɔme siwo wokpɔ mɔ na kpɔ hena dɔwɔwɔ siwo bia nu geɖe.
Woate ŋu ade ama PVC foam board siwo sɔ hã alo atsɔ laminated awɔ woe. Ele be woada anyigba ƒe dzadzraɖo, aŋenu tiatia kple nusi wotsɔ blae ƒe sɔsɔme kpɔ hafi woawɔ dɔ le agbɔsɔsɔ gã me.
Panel ƒe kpekpeme dzi ɖeɖe kpɔtɔ ate ŋu ana be agbatsɔtsɔ, eŋudɔwɔwɔ kple eɖoɖo ɖe teƒea nanɔ bɔbɔe wu, vevietɔ na dzesi gãwo kple nusiwo woɖena fiana.
Nuƒlelawo ate ŋu adzro didime siwo wowɔ ɖe ɖoɖo nu le agbalẽtamɔ̃ ƒe abawo, CNC ƒe ɖoɖowo, dzesi siwo wowɔ vɔ alo akpa siwo wowɔ nu. Nudɔdɔ si te ɖe lolome si wobia tso esi wu enu ŋu ate ŋu aɖe lãɖeɖe kple nuwo ƒe gbegblẽ dzi akpɔtɔ.
Woate ŋu atia PVC foam board ƒe nɔnɔme vovovowo na ɣeyiɣi kpui aɖe ƒe dodoɖeŋgɔ, asitsaƒewo ƒe xɔtunuwo, ɖeɖefia ƒe nɔnɔmetatawo alo xɔmenuwo ɖoɖo ɣeyiɣi didi wu le sesẽme si hiã kple eƒe anyigba ƒe anyinɔnɔ nu.
Woateŋu aƒo agbalẽtata, mɔfiame, lãɖeɖe, tomekuku, kadodo kple nuwuwu nu ƒu awɔ dzesi gbadzawo, didime ƒe nɔnɔmetatawo, ɖeɖefiawo, atsyɔ̃ɖoɖo ƒe akpawo kple kpekpe siwo wowɔ.
Wozãa White PVC foam board geɖe abe substrate sesẽ ene na dzesi siwo wota, mɔfiame dzesiwo, menu boards, wɔnawo ƒe nɔnɔmetatawo kple boblododo ɖeɖefiawo.
Asitsahawo ƒe aɖaŋuwɔlawo ateŋu azã PVC foam board hena nusiwo woƒle ƒe ɖeɖefiawo, adzɔnuwo ŋuti nyatakakawo ƒe akpawo, agbalẽdzraɖoƒe ƒe nɔnɔmetatawo, nusiwo wotsɔ ŋkɔ na kple ɣeyiɣi kpui aɖe ƒe dɔdzikpɔhawo.
Akpa siwo wota siwo ƒe kpekpeme le bɔbɔe la ɖea vi na ɖeɖefiaxɔwo, nukpɔkpɔ ƒe gliwo, nɔnɔmetatawo, didime ƒe dzesiwo kple wɔnawo ƒe ɖeɖefia siwo woate ŋu atsɔ ayi teƒe bubuwo.
Woate ŋu atsɔ PVC foam board si le kpekpem wu aɖo mɔ alo atsoe ɖe ŋɔŋlɔdzesiwo, dzesiwo kple atsyɔ̃ɖoɖo ƒe nɔnɔmewo me na dzesi siwo le xɔ me kple nusiwo woaɖe afia.
Woateŋu azã PVC foam board na atsyɔ̃ɖoɖo ƒe akpawo, ememe nɔnɔmetatawo, mamawo kple gliwo zazã le afisiwo wodi be woatsɔ plastic substrate si me tsi mele o si le bɔbɔe wu.
Woate ŋu ada grade siwo sɔ siwo ƒe kpekpeme lolo wu alo esiwo le kpekpem wu la akpɔ na kabinet ƒe akpawo, agbalẽdzraɖoƒewo, mamawo kple xɔmenuwo ƒe dɔwɔwɔ. Ele be woaɖo kpe mɔ̃ɖaŋununya ƒe nudidiwo dzi hafi aɖɔli xɔtuɖaŋu ƒe atiwo.
Mɔ̃ɖaŋudɔwɔwɔ bɔbɔe kple kpekpeme sue aɖe na PVC foam board ɖea vi na kpɔɖeŋuwo, kpɔɖeŋuwo, xɔtuɖaŋu ɖeɖefiawo, nɔnɔmetatawo kple aɖaŋunu siwo wowɔ.
Wozãa PVC foam board enuenu na xɔmenuwo kple gota dɔwɔwɔ tiatia aɖewo siaa, gake menye PVC foam board ƒe hatsotso ɖesiaɖee wòle be woabu le eɖokui si be enye gotagomenu si anɔ anyi ɣeyiɣi didi o.
Standard white PVC foam board sɔ nyuie na dɔwɔwɔwo abe asitsaƒewo ƒe ɖeɖefiawo, xɔme dzesiwo, ɖeɖefiawo, agbalẽtata ƒe akpawo, atsyɔ̃ɖoɖo ƒe akpawo kple ememe wɔwɔ ne tiatia ƒe titrime kple kpekpeme ɖo mɔ̃ɖaŋunudidiwo gbɔ.
Ele be gotagome dɔwo nabu UV ƒe keklẽ, dzoxɔxɔ ƒe tɔtrɔ, ya ƒe agba, eɖoɖo mɔnu, ʋuƒo ƒe titrime, amadede ƒe liƒo kple dɔwɔwɔ ƒe agbenɔƒe si wokpɔ mɔ na ŋu. Ele be nuƒlelawo nagblɔe kɔte be dɔa le gota ne wole ga home biam ale be woate ŋu ada PVC foam board ƒe dzesi si sɔ la kpɔ.
Ne PVC board la sɔ na gotagome nɔnɔme gɔ̃ hã la, nɔnɔmetata si wota hã nɔ te ɖe ink ƒe atikewɔwɔ, UV ƒe tsitretsitsi, anyigba dzi dzadzraɖo kple laminate alo ametakpɔnu ɖesiaɖe si wotsɔ blae dzi.
Dzo-dɔwɔwɔ ƒe nudidiwo toa vovo ŋutɔ le dzesiwo, ɖeɖefiawo, dutoƒoxɔwo, ʋuɖoɖo kple xɔtudɔwo dome. Eyata ele be nuƒlelawo naƒo asa na ebubu be PVC-futunu ɖesiaɖe nana dzotsitsi ƒe hatsotso ma ke nadze le eɖokui si.
Ne wò dɔa bia dzo ƒe dzeside tɔxɛ aɖe la, na dodokpɔ ƒe dzidzenu si sɔ, hatsotsowo kple asi si me woayi ne èle nu biam. Emegbe Wallis ate ŋu aɖo kpe edzi nenye be dzeside si sɔ si wodo kpɔ alo nuŋlɔɖi siwo ɖo kpe edzi li na nɔnɔme si wobia tso esi.
Woate ŋu atso PVC foam board to saws siwo sɔ, CNC routers kple plastic alo atiwɔwɔ ƒe dɔwɔnu bubuwo zazã me. Ele be woatrɔ asi le akplɔa tiatia kple etsotso ƒe duƒuƒu ŋu wòasɔ ɖe nusi wotsɔ wɔe ƒe titrime kple eƒe kpekpeme nu.
CNC mɔfiame ate ŋu awɔ ŋɔŋlɔdzesiwo, dzesiwo, mɔ̃wo, kotokuwo kple nɔnɔme tɔxɛwo. Ele be aɖaŋuwɔlawo nado nuɖuɖu ƒe agbɔsɔsɔme, spindle ƒe duƒuƒu kple dɔwɔnuwo kpɔ be woakpɔ go siwo le dzadzɛ dzoxɔxɔ maƒo ƒu fũu akpa o.
Kuku kple babla ƒe nudidiwo nɔ te ɖe ʋua ƒe kpekpeme, eƒe titrime, gavi ƒe nɔnɔme kple agba si wokpɔ mɔ na dzi. Le xɔmenuwo alo akpa siwo wotsɔ mɔ̃ ƒo ƒu gome la, wokafui be woado kpɔɖeŋuwo kpɔ hafi awɔ wo.
Ele be woatu adhesive tiatia ɖe PVC board, mating material, ŋusẽ si hiã kple nutome ƒe ɖeɖefia dzi. Do kadodomɔnu bliboa kpɔ hafi nàwɔe le agbɔsɔsɔ gã me.
Woate ŋu ada amadede kple nusiwo wotsɔ blaa nu siwo sɔ kple PVC kpɔ ne ehiã be woatsɔ amadede si wowɔ ɖe ɖoɖo nu alo atsyɔ̃ɖoɖo awu enu. Anyigba dzi kɔklɔ kple primer alo pretreatment si sɔ ate ŋu ana adhesion nanyo ɖe edzi le nusi wotsɔ blae ƒe ɖoɖo nu.
| Feature | PVC Foam Board | Sesẽ PVC agbalẽ |
|---|---|---|
| Nɔnɔme | Lãmenugbagbeviwo ƒe wɔwɔme si me futukpɔ le | PVC ƒe wɔwɔme sesẽ |
| Kpekpeme | Kpekpeme si bɔbɔ ɖe anyi wu na panel ƒe didime siwo sɔ | Nusiwo wotsɔ wɔa nu ƒe kpekpeme kple kpekpeme si lolo wu |
| Nu Siwo Ŋu Woatsɔ Alé Nu Ðe Ŋui | Agbalẽtata, dzesiwo, nusiwo woɖena fiana kple ewɔwɔ si mebɔbɔ o | Dɔwɔwɔ siwo bia be woatsɔ plastic sesẽ ƒe nɔnɔmewo alo nusiwo ƒe kpekpeme lolo wu |
| Mɔ̃ɖaŋudɔwɔwɔ | Mɔzɔzɔ bɔbɔe kple ewɔwɔ kple dɔwɔnu siwo sɔ | Woate ŋu atsɔ mɔ̃ awɔe gake zi geɖe la, elolona wu eye wòlolona wu |
| Tiatiawɔwɔ | Tia eƒe titrime kple eƒe kpekpeme le sesẽme si hiã nu | Tia eƒe titrime le mɔ̃ɖaŋu kple atike ƒe nudidiwo nu |
Zi geɖe la, agbalẽtadɔwɔƒewo, dzesiwɔlawo, dzesidelawo kple wo wɔlawo biaa nya siwo to vovo na nudzraɖoƒe si wozãna ɖaa. Wallis ate ŋu adzro PVC foam board si wowɔ ɖe ɖoɖo nu le nuƒlela ƒe ewɔwɔ ƒe ɖoɖo nu.
Na titrime si hiã la kpe ɖe panel si wowu enu ƒe lolome kple eŋudɔwɔwɔ ŋu ale be woate ŋu ada sesẽme kple dɔwɔwɔ ƒe nudidiwo kpɔ.
Woate ŋu aƒo nu tso density ŋu le agbalẽtata, mɔfiame, fastening, cabinet fabrication alo mɔ̃ɖaŋununya ƒe nudidi bubuwo nu.
Woate ŋu adzro agbalẽvi ƒe didime siwo woɖo ɖi kple esiwo wowɔ ɖe ɖoɖo nu me be woasɔ kple agbalẽtata dɔwɔnu siwo ƒe nɔnɔme keke, CNC atɔ ƒe ɖoɖowo kple nusiwo wowɔ vɔ ƒe lolome.
Film si kpɔa ame ta ate ŋu akpe ɖe eŋu be ʋuƒoa ƒe anyime nakɔ le eŋudɔwɔwɔ, etsotso kple etsɔtsɔ yi teƒe bubu me. Ele be woagblɔ akpa ɖeka alo akpa eve ƒe nutsyɔtsyɔ ƒe nudidiwo le nyayɔyɔ me.
Ele be nuƒlela siwo hiã be woatrɔ lolome alo dɔa koŋ ƒe dɔwɔwɔ nana nutatawo, didimewo kple mɔɖeɖe ɖe nu ŋu ƒe nudidiwo hena numekuku.
Wokafua kpɔɖeŋu ƒe dodokpɔ ne agbalẽtata ƒe nyonyome, eƒe kpekpeme, eƒe anyigba ƒe nuwuwu, mɔ̃ alo gota dɔwɔwɔ le vevie. Nu ŋutɔŋutɔ dodo kpɔ le ewɔwɔ ƒe nɔnɔmewo me naa nyatakaka siwo ŋu viɖe le wu be woatia ʋuƒo tso nusiwo woŋlɔ ɖe ŋkɔ me ko me.
Kpɔ nɔnɔmetata ƒe nyonyome, ink ƒe ƒoƒo ɖe wo nɔewo ŋu, eƒe dɔyɔyɔ, amadede ƒe gbugbɔgawɔ kple eƒe anyigba ƒe sɔsɔme ɖa to agbalẽtamɔ̃ kple ewɔwɔ ƒe ɖoɖo siwo nèdi zazã me.
Da nugbɔ ƒe nyonyome, mɔfiame ƒe nuwɔna, dɔwɔnu ƒe vuvu kple mɔ̃ ƒe duƒuƒu kpɔ to dɔwɔnu siwo sɔ kple ewɔwɔ zazã me.
Ele be woado xɔmenuwo, kpekpe siwo wowɔ kple didime ƒe dzesiwo kpɔ kple nusi woɖo be woatsɔ alé nu ɖe nu ŋu, gavi alo mɔ̃ si wotsɔ blaa woe.
Le gotagome alo fafa ƒe dɔwɔwɔ gome la, da xɔ si wowu enu la kpɔ le dzoxɔxɔ, tsidzadza kple UV ƒe nɔnɔme siwo le teƒenɔlawo me hafi nàda asi ɖe dɔ gã aɖe dzi.
Na board ƒe titrime si wobia tso esi alo nàɖɔ nusi nèdi be yeazã ne wometia titrimea haɖe o.
Ne wogblɔ density xoxo la, na taɖodzinu ƒe asixɔxɔ. Ne menye nenema o la, ɖe eme nenye be woata ʋuƒoa koŋ, aɖoe ɖe mɔ dzi, woatsɔ mɔ̃ ablae alo woazãe atsɔ awɔ xɔmenuwoe.
Gblɔ didime kple kekeme si wobia, si me mɔɖeɖe ɖe nu ŋu alo nudidi ɖesiaɖe si woatso ɖe ɖoɖo nu hã le.
Gblɔ na Wallis nenye be woata board la le mɔ̃ dzi, woatae ɖe screen dzi, aɖoe ɖe mɔ dzi, aku nu me, ata amae, awɔ laminated alo awɔ dɔ le mɔ bubu nu.
Ele be woade dzesi gotadɔwo nyuie ale be woate ŋu abu UV ƒe ɖeɖefia, dzoxɔxɔ, eɖoɖo kple subɔsubɔ ƒe agbenɔƒe si wokpɔ mɔ na ŋu le klass tiatia me.
Ne dɔa bia dzobibi ƒe dzeside tɔxɛ aɖe, nutome ƒe gbeƒãɖeɖe alo mɔ̃ɖaŋu ŋuti nuŋlɔɖi bubuwo la, na dzidzenu si hiã kple asi si me woayi hafi nàbia.
De kpɔɖeŋu ƒe nudidi, dodokpɔ ƒe agbɔsɔsɔme, nudɔdɔ gbogbo si wokpɔ mɔ na kple nuƒle ƒe agbɔsɔsɔme si woagbugbɔ aƒle ne woli la eme.
Nubablɛ nyuie kpena ɖe PVC foam board ƒe anyigba, dzogoewo kple goawo ta le nudzraɖoƒe kple dukɔwo dome ʋuɖoɖo me. Woate ŋu awɔ ɖoɖo ɖe nubablɛ ƒe nudidiwo ŋu le agbalẽa ƒe lolome, eƒe titrime, eƒe agbɔsɔsɔ kple eɖoɖoɖa mɔnu nu.
Woate ŋu aƒo nu tso ametakpɔnu film, PE babla, kakɛwo, pallets alo dɔa koŋ ƒe babla mɔnuwo ŋu le nudɔdɔa ƒe nɔnɔme nu.
PVC foam board wozãna zi geɖe na dzesiwo, dijitaal tata, screen tata, POP ɖeɖefiawo, ɖeɖefia nɔnɔmetatawo, didime ŋɔŋlɔdzesiwo, ememe atsyɔ̃ɖoɖo, kpɔɖeŋuwo kple fabricated akpawo.
PVC agbalẽ si keke ta nye ŋkɔ si bɔ na PVC foam board. Nusi wotsɔ wɔe zãa lãmenugbagbeviwo ƒe PVC wɔwɔme si me futukpɔ le tsɔ ɖea kpekpeme dzi kpɔtɔna esime wòléa ʋuƒoa ƒe sesẽ si ŋu viɖe le me ɖe asi.
Wallis si do ƒome kple PVC foam board ƒe hatsotsowo ƒe titrime anɔ abe 1–35 mm ene. Nusiwo li la toa vovo le board ƒomevi, kpekpeme, lolome kple dɔwɔwɔ nu, eyata ele be woaɖo kpe nɔnɔme si wobia dzi hafi adɔ nu.
Ele be woatia kpekpeme le kpekpeme, sesẽme, mɔ̃a ƒe dɔwɔwɔ kple alesi woblae ƒe mɔnu si hiã nu. Wallis si do ƒome kple PVC foam board ƒe hatsotsowo lɔ abe 0.3–0.9 g/cm³, gake asixɔxɔ si sɔ nɔ te ɖe dɔwɔwɔ si wowu enu dzi.
Ẽ, wozãa PVC foam board ɣi si sɔ le afisiafi hena dijitaal kple UV tata tẽ. Ele be woatsɔ agbalẽtamɔ̃ ŋutɔŋutɔ ado ink ƒe ƒoƒo ɖe eŋu kple eƒe dɔyɔyɔ kpɔ hafi awɔe le agbɔsɔsɔ gã me.
Ɛ̃. Woate ŋu azã PVC foam board kple screen-printing ink system siwo sɔ. Ele be woaɖo kpe anyigba ƒe dzadzɛnyenye, ink ƒe atikewɔwɔ kple eƒe ƒuƒu alo eƒe dɔyɔyɔ ƒe nɔnɔmewo dzi hafi awɔe.
PVC te ŋu nɔa te sesĩe ɖe tsi dzrowo nu eye mexɔa tsi abe pepa alo ati siwo ŋu womewɔ atike ɖo o ene o. Gake nusi wowɔ vɔ bliboa ate ŋu anye nɔnɔmetata siwo wota, nusiwo wotsɔna léa nu ɖe nu ŋu alo nusiwo wotsɔ blaa nu siwo ƒe tsi te ŋu nɔa te ɖe enu vovovowo.
Woate ŋu azã PVC foam board ƒe hatsotso tiatia aɖewo le gota, gake ɣeyiɣi didi ƒe dzedze nɔ te ɖe UV ƒe ɖeɖefia, board ƒe wɔwɔme, eƒe titrime, dzoxɔxɔ, eɖoɖomɔnu kple dɔwɔwɔ ƒe agbenɔƒe si wokpɔ mɔ na dzi. Gblɔ na Wallis be dɔa nye gota gome ne èle biabiam be woaxe fe na ye.
Dzo ƒe dɔwɔwɔ toa vovo le alesi wowɔe, eƒe titrime kple dodokpɔ ƒe dzidzenu nu. Ne dɔ aɖe bia be woaɖo dzo ƒe hatsotso tɔxɛ aɖe la, na dzidzenu si hiã ale be woate ŋu aɖo kpe dzesi si wodo kpɔ si sɔ kple nuŋlɔɖiwo dzi tsɔ wu be nàtsɔe be PVC foam board katã ƒe dzeside sɔ.
Zi geɖe la, woate ŋu atso PVC foam board ahaɖo mɔ to atikpakpa alo aŋenuwo wɔwɔ ƒe dɔwɔnu siwo sɔ zazã me. Ele be woatrɔ asi le dɔwɔnuwo kple dɔwɔwɔ ƒe nɔnɔmewo ŋu wòasɔ ɖe ʋuƒoa ƒe titrime kple eƒe kpekpeme nu.
Ɛ̃. Wozãa CNC mɔfiame zi geɖe tsɔ wɔa didime ŋɔŋlɔdzesiwo, dzesiwo, grooves kple nɔnɔme siwo wowɔ ɖe ɖoɖo nu. Do nuɖuɖu ƒe agbɔsɔsɔme kple dɔwɔnuwo kpɔ le ʋuƒo si nètia dzi hafi nàwɔ mɔ̃ gãwo.
Woate ŋu ata PVC foam board si sɔ, awɔ laminated alo atsɔ vinyl nɔnɔmetatawo atsyɔ edzi ne wozã amadede kple nusiwo wotsɔna léa nu ɖe wo ŋu siwo sɔ. Wokafui be woadzra anyigba ƒe goglome ɖo eye woadoe kpɔ le alesi wòléna ɖe nu ŋui ŋu.
Ɛ̃. Woate ŋu adzro dzidzenu siwo woɖo ɖi kple esiwo wowɔ ɖe ɖoɖo nu me le agbalẽtata, ewɔwɔ kple nusiwo wowɔ vɔ ƒe nudidiwo nu. Na didime, kekeme, titrime kple agbɔsɔsɔ si hiã hena nyayɔyɔ.
Wokafu kpɔɖeŋu dodokpɔ na dɔ siwo me agbalẽtata ƒe nyonyome, eƒe kpekpeme, mɔ̃, adhesive bonding alo gota dɔwɔwɔ le vevie le. Te ɖe Wallis ŋu kple wò nɔnɔme si nèbia be nàdzro kpɔɖeŋu tiatia siwo nàwɔ me.
Taflatse na titrime, kpekpeme, agbalẽ ƒe didime, amadede, anyigba, agbalẽtata alo fabrication mɔnu, xɔme alo gota dɔwɔwɔ, ɖaseɖigbalẽ ƒe nudidiwo, bablawo kple akɔntabubu ƒe nudɔdɔ agbɔsɔsɔme.
Ðo Wallis wò titrime, kpekpeme, agbalẽ ƒe lolome, agbalẽtata alo ewɔwɔ ƒe ɖoɖo, dɔwɔwɔ kple nuƒle ƒe agbɔsɔsɔ si nèdi. Míate ŋu adzro ɣi PVC foam board egbɔkpɔnuwo na dzesiwo, dijitaal agbalẽtata, POP ɖeɖefiawo, ɖeɖefiawo, xɔmenuwo kple OEM fabrication dɔwo.
Ne mèka ɖe edzi be nɔnɔme kae sɔ o la, na panel ƒe didime siwo wowu enu, teƒe si woɖoe ɖo kple dɔwɔwɔ ƒe mɔnu ale be woate ŋu ada nusiwo hiã la kpɔ hafi woawɔe le agbɔsɔsɔ gã me.
