|
kaɖi dzi nyatakakawo
Wallis ye nye esia
| Amadede: | |
|---|---|
| Nusi wotsɔ wɔe: | |
| Anyigba: | |
| Agbɔsɔsɔ: | |
Wallis holographic laser rainbow film nye dedienɔnɔ ŋuti nu si woate ŋu atrɔ asi le si wowɔ na B2B dɔwɔƒe siwo wɔa ID cards, smart cards, access cards, bank cards kple dedienɔnɔ ƒe ɖaseɖigbalẽ bubuwo. Sinimaa wɔa iridescent effect si le ŋusẽ kpɔm si woate ŋu ade dzesii bɔbɔe le nukpɔkpɔ me esime wòkpena ɖe ame ŋu be woakpɔ kaɖi ŋuti nyatakaka siwo wota kple esiwo wowɔ na ame ŋutɔ ta tso tɔtrɔ kple aʋatsokaka me.
Nukae nye holographic laser dziŋgɔli film? Enye PET/PVC film si me kɔ alo si me kɔ afã kple afã si me wotsɔa nukpɔkpɔ ƒe nɔnɔme si wotsɔa nu ƒoa nui ɖo si trɔa amadede kple dzedzeme le nukpɔkpɔ ƒe dzogoe vovovowo te. Woate ŋu atsɔe ana le agbalẽ xatsaxatsa alo agbalẽ xatsaxatsa ƒe nɔnɔme me eye woatsɔe awɔ ɖeka abe laminated card overlay alo decorative security layer ene.
Le kaɖidɔwɔƒewo, agbalẽtaƒewo kple dedienɔnɔ ŋuti nuŋlɔɖiwo ƒe kontraktɔwo gome la, nusi wotsɔ wɔe la naa viɖe ŋutɔŋutɔ etɔ̃: kpeɖodzi si woate ŋu akpɔ, anyigba ƒe takpɔkpɔ si nyo wu kple asitɔtrɔ le nɔnɔmewo ŋu si te ŋu trɔna bɔbɔe. Woate ŋu atsɔ holographic ƒe nɔnɔme siwo sɔ kple esiwo wowɔ ɖe ɖoɖo nu asɔ kple kaɖi ƒe wɔwɔme, lamination dɔwɔnuwo, nukpɔkpɔ ƒe nɔnɔme kple nudɔdɔ ƒe agbɔsɔsɔme.
Dɔbiagbalẽvi siwo woɖo taɖodzinu na: dziɖuɖu ƒe ID-gbalẽviwo, dɔwɔlawo ƒe akɔtagbalẽviwo, mɔɖeɖegbalẽviwo, smart cardwo, gadzraɖoƒegbalẽviwo, ʋukugbalẽviwo kple hamevinyenye ƒe agbalẽviwo
Nusiwo li: PET kple PVC film tiatia
Titrime si li: 20–100 μm, le dɔa ƒe nudidiwo nu
Nusiwo woatsɔ ana ƒe nɔnɔmewo: agbalẽ xatsaxatsa alo agbalẽ siwo wowɔ ɖe ɖoɖo nu
Trɔ asi le eŋu: holographic ƒe kpɔɖeŋu, logo, microtext, guilloche ƒe nɔnɔme, nukpɔkpɔ le gaglãgbe, didime kple nubablɛwo
Ðo wò kaɖi ƒe nu, kaɖi ƒe wɔwɔme si wowu enu, eƒe titrime si hiã, didime, ƒe sia ƒe ƒe agbɔsɔsɔ kple dedienɔnɔ-ɖoɖo ƒe nudidiwo ɖe Wallis. Míaƒe ƒuƒoƒoa aɖo aɖaŋu na sinimawɔwɔ kple eƒe kpɔɖeŋuwo xɔxɔ ƒe ɖoɖo si sɔ.
Bia be woawɔ Film ƒe Kpɔɖeŋu si Wotrɔ Asi Le
Asixɔxɔ siwo gbɔna la ɖɔa nusiwo li ƒe hatsotso. Ele be woaɖo kpe nɔnɔme mamlɛtɔ dzi to kpɔɖeŋu dodokpɔ me elabena kadodo ƒe dɔwɔwɔ nɔ te ɖe kaɖia ƒe anyigba, ink ƒe ɖoɖo, lamination ƒe dzoxɔxɔ, nyaƒoɖeamenu kple ewɔwɔ ƒe tsatsam dzi.
| Parameter ƒe | Nyatakakawo |
|---|---|
| Nu | PET / PVC ƒe dɔwɔwɔ |
| Adzɔnu Ƒomevi | Holographic laser dziŋgɔli film / dedienɔnɔ kaɖi tsyɔ film |
| Ŋkume | Holographic ƒe anyigba si le gbadzaa |
| Nukpɔkpɔ ƒe Ŋusẽkpɔɖeamedzi | Dziŋgɔli / laser / iridescent ŋusẽkpɔɖeamedzi |
| Eƒe titrime | 20–100 μm ƒe didime |
| Kekeme Kple Agbɔsɔsɔme | Wotrɔ asi le eŋu le agbalẽ xatsaxatsa, agbalẽ alo kaɖi-wɔwɔ ƒe nudidiwo nu |
| Nuwɔwɔ le gaglãgbe | Nusi me kɔ / si me kɔ afã kple afã |
| Dɔwɔwɔ Gbãtɔ | Card lamination, overlay kple nukpɔkpɔ dedienɔnɔ ƒe ɖekawɔwɔ |
| Kpekpeɖeŋugbalẽvi Siwo Sɔ Kple Wo Nɔewo | PVC, PET, ABS kple kaɖi ƒe xɔtuɖoɖo siwo sɔ kple wo nɔewo le dodokpɔ megbe |
| Lamination Mɔnu | Hot lamination / vuvɔ lamination, le grade tiatia nu |
| Dɔwɔwɔ ƒe Tiatiawɔblɔɖe | High bonding, UV-tsitretsitsi, scratch-tsitretsitsi kple wear-tsitretsitsi tiatia |
| Trɔ asi le eŋu | Kpɔɖeŋu, dzesi, microtext, guilloche, lolome, nukpɔkpɔ le gaglãgbe kple nubablɛwo |
| MOQ | Enɔ te ɖe film ƒe wɔwɔme, eƒe didime kple nɔnɔme si wowɔ ɖe ɖoɖo nu ƒe nudidiwo dzi |
Holographic ƒe wɔwɔme si woŋlɔ ɖe edzi la naa nukpɔkpɔ ƒe ŋusẽkpɔɖeamedzi si trɔa amadede le kekeli kple nukpɔkpɔ ƒe dzogoe siwo le tɔtrɔm te. Nɔnɔme sia si dzena gaglãa la ɖea mɔ na kaɖiwɔlawo, ŋkutsala kple nuwuwu zãlawo be woawɔ nukpɔkpɔ ƒe nyateƒetoto me dzodzro kabakaba dɔwɔnu tɔxɛwo manɔmee.
Esesẽna be woagbugbɔ holographic nɔnɔmetatawo awɔ to agbalẽtata, scanning alo fotokɔpiwɔwɔ si bɔ me. Ne wotsɔe ƒo ƒu ɖe nyatakaka siwo wota alo esiwo wowɔ na ame ŋutɔ dzi la, filma gadea mɔxenu bubu si xea mɔ na kaɖi ƒe gbugbɔgawɔ, nyatakakawo ɖɔliɖɔli kple eƒe gotagome tɔtrɔ. Woate ŋu ada xɔ siwo ŋu wotrɔ asi le le wo ŋu la kpɔ hena dɔ siwo hiã kpeɖodzi si woate ŋu akpɔ be woɖe wo ɖa.
Tiatia siwo me kɔ kple esiwo me kɔ afã kple afã la kpɔa fotowo, ŋkɔwo, xexlẽdzesiwo, fliwo kple nɔnɔmetata siwo wota le sinima la te ƒe nuxexlẽ ta. Woate ŋu atrɔ asi le kpɔɖeŋua ƒe kpekpeme kple eɖoɖo ŋu ale be dedienɔnɔ ƒe ŋusẽkpɔɖeamedzia nado alɔ, ke menye be wòaxe mɔ na, kaɖia me dzodzro.
Dzeside tiatia aɖewo naa ʋuʋudedi, vuvu kple UV tsitretsitsi be wòakpe ɖe ame ŋu woakpɔ kaɖi ƒe nɔnɔmetatawo ta le gbesiagbe zazã me. Ele be woatia xɔtutu si sɔ le dɔwɔwɔ ƒe agbenɔƒe si wokpɔ mɔ na, yame ƒe nɔnɔme, abrasion ƒe sesẽme kple card-nana ƒe dzidzenu nu.
Woate ŋu atsɔ film la ana na dzoxɔxɔ alo vuvɔ lamination eye woadae kpɔ kple PVC, PET, ABS kple composite card structures. Wallis kafui be woawɔ dodokpɔ do ŋgɔ na ewɔwɔ kple nu vevi ƒe agbalẽ ŋutɔŋutɔ, nutsyɔnu, nuŋlɔtsi, adhesive, chip alo antenna inlay kple lamination cycle si asisi la zãna.
Tiatia siwo wowɔ ɖe ɖoɖo nu ate ŋu anye dzesidenuwo, adzɔnu ƒe dzesi siwo gbugbɔna, microtext, guilloche fliwo, geometric elements kple kpɔɖeŋu ƒe ɖoɖo si dzi wokpɔna. Nɔnɔme siawo kpena ɖe agbalẽvi dzralawo ŋu be woawɔ dzesidenu si woate ŋu ade dzesii le nukpɔkpɔ me eye woɖea ŋuɖoɖo ɖe adzɔnuwo ƒe nɔnɔme siwo wozãna le mɔ vovovowo nu ŋu dzi kpɔtɔna.
Dedienɔnɔ-film ƒe dɔ dzidzedzetɔe bia nu geɖe wu dziŋgɔli ƒe dzedzeme tiatia ko. Ele be sinima ƒe wɔwɔme nasɔ kple kaɖia ƒe nɔnɔme, ewɔwɔ dɔwɔnuwo, ŋkuléleɖenuŋu ƒe mɔnu kple nuƒle ƒe ɖoɖoa. Wallis ateŋu adzro tɔtrɔ siwo gbɔna me le kpɔɖeŋuwo xɔɣi kple nyayɔyɔ me.
| Customization Item | si Li Dɔa ƒe Tiatiawɔblɔɖe |
|---|---|
| Dedienɔnɔ Ŋuti Ðoɖowɔwɔ | Generic pattern alo custom logo, microtext, guilloche kple nɔnɔmetata siwo gbugbɔna |
| Nukpɔkpɔ ƒe Dzedzeme | Dziŋgɔli, iridescent, laser kple dɔa koŋ ƒe nukpɔkpɔ ƒe ŋusẽkpɔɖeamedziwo |
| Nuwɔwɔ le gaglãgbe | Nusi me kɔ alo esi me kɔ afã kple afã, wotrɔ asi le eŋu be nyatakakawo nate ŋu akpɔ |
| Dzidzemewo | Custom ƒe titrime, kekeme, agbalẽ xatsaxatsa ƒe didime kple agbalẽ ƒe lolome |
| Lamination Xɔtutu | Dzeside tiatia na asisi ƒe substrate, dɔwɔwɔ kple bonding nudidi |
| Nusiwo wobla ɖe agba me | Export packaging, agbalẽ xatsaxatsa takpɔkpɔ, agbalẽwo mama kple custom labeling |
Dzro Wò Dedienɔnɔ Film Ŋuti Nyatakakawo Me
Woɖo sinima sia na dɔnyala ƒe kaɖi kple nuŋlɔɖi siwo le dedie wɔwɔ le afisiwo wòhiã be woakpɔ kpeɖodzi si woate ŋu akpɔ, takpɔkpɔ le anyigba dzi kple vovototodedeameme le adzɔnuwo ŋu le.
Holographic layer si me kɔ ate ŋu akpɔ nɔnɔmetatawo kple agbemeŋutinya ŋuti nyatakakawo ta esime wòle nusi dze gaglã si ŋkutsalawo ate ŋu ade dzesii le kekeli si sɔ me kpem ɖe eŋu. Woate ŋu awɔ ɖoɖo ɖe nɔnɔme siwo wowɔ ɖe ɖoɖo nu ŋu wòasɔ kple dɔwɔƒe si naa nuawo ƒe dzesidenu si wokpɔna.
Dɔwɔƒewo, sukuxɔwo kple dɔwɔƒewo ƒe mɔɖeɖe ƒe agbalẽviwo ate ŋu azã dziŋgɔli ƒe ŋusẽkpɔɖeamedzia atsɔ ado alɔ ɖaseɖigbalẽwo xɔxɔ kabakaba eye woaɖe dzi le wo ƒo be woagbugbɔ wo adzi si ŋu womeɖe mɔ ɖo o. Woate ŋu atsɔ magnetic stripe, contact chip, contactless kple RFID card structures ada film la kpɔ.
Holographic ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu tsɔa dzedzeme nyuitɔ kple nyateƒetoto ƒe nɔnɔme si woate ŋu akpɔ kpena ɖe ganyawo, nuteƒewɔwɔ kple hamevinyenye ƒe agbalẽviwo ŋu. Ele be woawɔ ɖoɖo ɖe nɔnɔmetatawo ɖoɖo ŋu kple asidede agbalẽ te, magnet- fliwo, chips, ame ŋutɔ ƒe nɔnɔme ƒe teƒewo kple teƒe siwo hiã be mɔ̃ ate ŋu axlẽ.
Woate ŋu atsɔ sinima la ade smart-card wɔwɔ me le akpa vovovowo wɔwɔ me le dodokpɔ si wowɔ be esɔ ɖe wo nɔewo nu megbe. Ele be kaɖi wɔlawo naɖo kpe lamination ƒe nuwɔna, gbadzaƒe, chip-module ɖoɖo kple antenna ƒe dɔwɔwɔ dzi to wɔwɔ ƒe ɖoɖo mamlɛtɔ zazã me.
Woate ŋu azã film xɔtutu siwo ku ɖe dɔa koŋ ŋu hã na nuŋlɔɖi ƒe axa siwo wotsɔ laminated, ɖaseɖigbalẽwo, tikiti siwo ƒe asi sẽ kple adzɔnu ƒe ŋkɔ takpɔkpɔ ƒe dɔwɔɖoɖowo. Ele be woaɖo kpe edzi be esɔ le nuŋlɔɖia me nyawo, dedienɔnɔ ƒe seƒe kple tɔtrɔ ƒe ɖoɖoa nu.
Na nu vevitɔ, nusi wotsɔ tsyɔ edzi, kaɖi ƒe titrime bliboa, agbalẽtatamɔnu, chip alo antenna ƒe wɔwɔme kple subɔsubɔ ƒe nɔnɔme siwo hiã. Nyatakaka siae afia film ƒe dzeside si wòle be woatsɔ awɔ kpɔɖeŋui.
Tia stock pattern alo tsɔ nutatawo ɖo ɖa hena hologram si wowɔ ɖe ɖoɖo nu. De dzesi nyatakaka ƒe teƒe veviwo, nɔnɔmetata ƒe teƒewo, nusiwo mɔ̃ ate ŋu axlẽ kple teƒe ɖesiaɖe si wòle be woaɖe nɔnɔmetata la dzi akpɔtɔ alo aɖee ɖa le.
Wɔ yameʋuɖoɖo dodokpɔ to dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si nènɔa anyi kple fafamɔnu si nèdi la zazã me. Kpɔ adhesion, flatness, transparency, optical consistency, tata ƒe nuxexlẽ kple tsitretsitsi ɖe delamination ŋu.
Da agbalẽvi si wokpe ɖo la kpɔ be ebɔbɔ, eʋuʋu, dzoxɔxɔ, fafa, UV ƒe ɖeɖefia kple alesi wòsɔ kple ame ŋutɔ ƒe nɔnɔme alo encoding dɔwɔnuwo le asisi la ƒe ememe dzidzenu alo dɔa ƒe nɔnɔme nu.
Ne woda asi ɖe sinima la ƒe dzedzeme, eƒe didime, eƒe ʋuʋu, eƒe babla, eƒe babla kple dodokpɔ si wowɔ le kaɖi si wowɔ vɔ dzi vɔ megbe ko hafi woadze ewɔwɔ le agbɔsɔsɔ gã me gɔme. Nufiame ƒe kpɔɖeŋu si dzi woda asi ɖo léle ɖe asi kpena ɖe ame ŋu be ɖekawɔwɔ nanɔ anyi le nudɔdɔ siwo wogbugbɔ wɔ la katã me.
Be nàna numekuku kple nyayɔyɔ ƒe ɖoɖoa nanɔ kpuie la, tsɔ nyatakaka siwo gbɔna la dometɔ geɖe de wò nyabiasea me alesi nàte ŋui:
Nusi wotsɔ wɔa sinima: PET alo PVC
Titrime, kekeme, agbalẽ xatsaxatsa ƒe didime alo agbalẽ ƒe lolome si hiã
Dzedzeme si me kɔ alo esi me kɔ afã kple afã
Stock holographic kpɔɖeŋu alo atsyã si wowɔ ɖe ɖoɖo nu
Card substrate kple blibo layer wɔwɔme
Dzoxɔxɔ alo vuvɔ lamination ƒe ɖoɖo
Agbalẽtata kple ame ŋutɔ ƒe tɔtrɔ ƒe mɔnu
Kpɔɖeŋu agbɔsɔsɔme, dodokpɔ ƒe agbɔsɔsɔme kple ƒe sia ƒe ƒe didi si wobu
Wobia be woatsɔ nubablɛwo, dzesideŋkɔwo kple asi si woayi
Wallis doa alɔ kaɖi wɔlawo, tɔtrɔlawo, agbalẽtadɔwɔƒewo kple dɔa ƒe kontraktɔ kple numedzodzro le nɔnɔmewo ŋuti numedzodzro, kpɔɖeŋuwo xɔxɔ, didime siwo wowɔ ɖe ɖoɖo nu kple ewɔwɔ le agbɔsɔsɔ gã me. Mɔ̃ɖaŋununya ƒe kadodo tẽ kpena ɖe ame ŋu be woaɖe masɔmasɔ siwo le sinima la kple asisi la ƒe kaɖi ƒe dɔwɔwɔ dome dzi akpɔtɔ.
Tsɔ kpe ɖe holographic film ŋu la, Wallis naa card-production materials abe PVC core sheets, PET/PETG materials, overlay films kple card components siwo do ƒome kplii. Esia wɔnɛ be wònɔa bɔbɔe be woada holographic layer la kpɔ abe laminated card structure blibo ƒe akpa aɖe ene.
Asitsalawo ate ŋu abia dɔa koŋ ƒe titrime, didime, gaglãgbe kple nukpɔkpɔ ƒe nɔnɔmewo. Sampling na nuƒlela te ŋu ɖo kpe nukpɔkpɔ ƒe dɔwɔwɔ, kadodo kple ewɔwɔ ƒe sɔsɔ dzi hafi tsɔ eɖokui na be yeawɔ nudɔdɔ si lolo wu.
Woate ŋu awɔ ɖoɖo ɖe agbalẽ xatsaxatsa kple agbalẽ xatsaxatsawo ŋu be woakpɔ film la ƒe anyime, eƒe goawo kple eƒe ʋuʋudedi ta le dukɔwo dome ʋuɖoɖo me. Woate ŋu alé nɔnɔme tɔxɛ siwo dzi woda asi ɖo kple nufiame kpɔɖeŋuwo ɖe asi be woado alɔ nudɔdɔ gbugbɔgawɔ ƒe ɖekawɔwɔ.
Wallis wɔa dɔ kple dukɔwo dome nuƒlelawo le kpɔɖeŋuwo me toto, nɔnɔmewo ƒe kpeɖodzi, nu gbogbowo wɔwɔ kple wo ɖoɖo ɖe duta. Mɔ̃ɖaŋununya ƒe nudidi siwo me kɔ kple kpɔɖeŋu si dzi woda asi ɖoe nye gɔmeɖoanyi na nuwɔwɔ aduadu si li ke le dedienɔnɔgbalẽvi siwo wowɔ ɖe ɖoɖo nu ŋu.
Dɔwɔƒea ƒe gbesiagbedɔwo
Zi geɖe la, B2B dedienɔnɔ-film dɔwo bia be woawɔ nuwo ƒe nɔnɔmewo me toto zi geɖe eye woawɔ kpɔɖeŋu ƒe nyaŋuɖoɖowo. Wallis doa alɔ nuƒlelawo to nutatawo ƒe kpeɖodzi, dodokpɔ wɔwɔ, dɔwɔwɔ me toto kple ɖoɖowɔwɔ ɖe nudɔdɔ gbugbɔgawɔ ŋu me.
Wozãnɛ abe dedienɔnɔ kple ametakpɔnu si woate ŋu akpɔ le ID-gbalẽviwo, mɔɖeɖegbalẽviwo, smart cardwo, gadzraɖoƒegbalẽviwo, ʋukugbalẽviwo kple ɖaseɖigbalẽ bubuwo me ene. Nukpɔkpɔ ƒe nɔnɔme trɔna le nukpɔkpɔ ƒe dzogoe nu, si kpena ɖe ezãlawo ŋu be woade dzesi kaɖi vavãtɔ esime wole nyatakaka siwo le sinima la te ta kpɔm.
Ɛ̃. PET kple PVC ƒe tiatia aɖewo li. Ele be woatia nusi sɔ le kaɖia ƒe anyigba, lamination ƒe ɖoɖo, anyinɔnɔ si hiã kple kaɖi ƒe wɔwɔme si wowu enu nu.
Zi geɖe la, afisi woate ŋu akpɔe le la nye 20–100 μm. Titrime mamlɛtɔ nɔ te ɖe dedienɔnɔ ƒe ŋusẽkpɔɖeamedzi, kaɖi ƒe wɔwɔ, kadodomɔnu kple kaɖi si wowu enu ƒe titrime bliboa si asisi la bia dzi.
Ɛ̃. Atsyã siwo wowɔ ɖe ɖoɖo nu ate ŋu anye dzesidenuwo, microtext, guilloche lines, adzɔnu ƒe dzesidenu siwo gbugbɔna kple dɔa koŋ ƒe nɔnɔmetatawo. Ele be woaɖo kpe nutata ƒe ŋutete, gɔmedzedze ƒe nudidiwo, MOQ kple ŋgɔyiyi ƒe gazazã dzi hafi woawɔe.
Wotrɔ asi le dzesi siwo me kɔ kple esiwo me kɔ afã kple afã ŋu be woalé nɔnɔmetatawo, ŋkɔwo, xexlẽdzesiwo kple nɔnɔmetata siwo wota ƒe dzedzeme ɖe te. Woate ŋu atrɔ asi le nɔnɔmetata ƒe tsɔtsɔme kple teƒe si woɖoe ɖo ŋu be woate ŋu axlẽ nyatakaka ƒe teƒe veviwo.
Woate ŋu ada film la kpɔ kple PVC, PET, ABS kple xɔtunu siwo wowɔ ɖekae siwo sɔ. Esi wònye be inks, adhesives kple lamination ƒe nɔnɔmewo toa vovo ta la, Wallis kafui be woado asisiwo ƒe nu ŋutɔŋutɔwo kpɔ hafi woawɔ wo le agbɔsɔsɔ gã me.
Hot-lamination kple cold-lamination tiatia li le film ƒe wɔwɔme si wotia nu. Ma wò dɔwɔnuwo kple dɔwɔwɔ ƒe nɔnɔmewo ale be woate ŋu akafu dzesi si sɔ.
Holographic layer ate ŋu ana kɔpiwɔwɔ kple tɔtrɔ nasesẽ wu, eye xɔtuɖoɖo siwo me woate ŋu atrɔ asi le wo ŋu ate ŋu aɖe nusiwo gblẽ si woate ŋu akpɔ afia le agbagbadzedze be woaɖe wo ɖa megbe. Ele be woagblɔ asitɔtrɔ le ame ŋu ƒe nuwɔna si hiã eye woadoe akpɔ le agbalẽvi ƒe wɔwɔme si woɖo be woawɔ ŋu.
Ɛ̃. Wokafu kpɔɖeŋuwo tsɔtsɔ ɖo kpe nukpɔkpɔ ƒe dzedzeme, gaglãgbe, adhesion, lamination nuwɔna kple finished-card dɔwɔwɔ dzi. Na wò taɖodzinu ƒe nɔnɔme kple kaɖi ƒe ɖoɖo ne èle kpɔɖeŋuwo biam.
MOQ nɔ te ɖe nenye be dɔa zã nɔnɔme si woɖo ɖi alo esi wowɔ ɖe ɖoɖo nu, kpakple film la ƒe nu, eƒe titrime, eƒe didime, eƒe ʋuʋu kple eƒe babla dzi. Te ɖe Wallis ŋu nàŋlɔ wò nudɔdɔ ƒe agbɔsɔsɔme si nèbu hena dɔa koŋ ƒe ga home aɖe.
Taflatse na nusi wotsɔ wɔe, eƒe titrime, kekeme alo agbalẽ ƒe lolome, nusiwo me kɔ, holographic ƒe nɔnɔme, kaɖi ƒe anyigba, lamination mɔnu, kpɔɖeŋu agbɔsɔsɔme, ƒe sia ƒe ƒe didi si wobu, nubablɛ ƒe nudidiwo kple dukɔ si me woayi.
Èhiã na holographic film si sɔ kple wò kaɖi ƒe flia? Ðo wò mɔ̃ɖaŋununya ƒe nudidiwo ɖe mí hena nu tiatia, kpɔɖeŋu ƒe dodokpɔ kple dɔwɔƒe ƒe asixɔxɔ.
