Custom Holographic Laser Rainbow Film ma ID Kaad a Ahobammɔ

Holographic Laser Rainbow Film ma ID Kaad a Ahobammɔ Yɛ

Wallis holographic laser rainbow film yɛ ahobanbɔ ade a wotumi sesa a wɔayɛ ama B2B ayɛfo a wɔyɛ ID kaad, smart card, access card, sikakorabea card ne adansedi nkrataa afoforo a ahobammɔ kɛse wom. Sini no ma ɛyɛ iridescent effect a ɛyɛ nnam a ɛnyɛ den sɛ wobehu wɔ aniwa so bere a ɛboa ma wɔbɔ kaad data a wɔatintim ne nea wɔayɛ ama obiara ho ban fi nsakrae ne atoro a wɔbɛyɛ ho no.

Dɛn ne holographic laser nyankontɔn sini? Ɛyɛ PET/PVC sini a ɛda adi anaasɛ ɛyɛ fã bi a ɛda adi a ɛwɔ embossed optical pattern a ɛsakra kɔla ne ne hwɛbea wɔ hwɛbea ahorow ase. Wobetumi de ama wɔ roll anaa sheet kwan so na wɔde ahyɛ mu sɛ laminated card overlay anaasɛ decorative security layer.

Wɔ kaad adwumayɛbea ahorow, adwumayɛbea ahorow a wotintim nhoma ne wɔn a wɔyɛ ahobammɔ-nkrataa ho adwumayɛfo fam no, nneɛma no de mfaso abiɛsa a mfaso wɔ so ma: nokwaredi a wotumi hu, ahobammɔ a ɛkɔ soro wɔ soro ne sɛnea wɔyɛ no sɛnea wɔpɛ. Wobetumi de standard ne custom holographic patterns ahyia ne card nhyehyɛe, lamination mfiri, aniwa nhyehyɛe ne order volume.

• Akwankyerɛ a wɔde asi wɔn ani so: aban ID nkrataa, adwumayɛfoɔ badge, access cards, smart cards, sikakorabea cards, karka tumi krataa ne asɔremma kaad

• Nneɛma a ɛwɔ hɔ: PET ne PVC sini a wobetumi apaw

• Ne kɛseɛ a ɛwɔ hɔ: 20–100 μm, ɛgyina adwuma no ahwehwɛdeɛ so

• Nneɛma a wɔde ma: nhoma mmobɔwee anaa nkrataa a wɔahyɛ da ayɛ

• Customization: holographic nhwɛso, logo, microtext, guilloche nhyehyɛe, pefeeyɛ, nsusuwii ne nneɛma a wɔde kyekyere

Send Wallis wo kaad nneɛma, kaad nhyehyɛe a wɔawie, ne kɛse a wɔhwehwɛ, ne nsusuwii, afe afe dodow ne ahobammɔ-nsusuwii ahwehwɛde ahorow. Yɛn kuw no bɛkamfo sini a wɔbɛyɛ ne nhwɛsode nhyehyɛe a ɛfata akyerɛ.

Bisa Sini Nhwɛsode a Wɔayɛ no Amanneɛbɔ

Mfiridwuma Ho Nsɛm a Wɔakyerɛkyerɛ Mu

Nneɛma a edidi so yi kyerɛkyerɛ nneɛma ahorow a ɛwɔ hɔ no mu. Ɛsɛ sɛ wɔfa nhwɛsoɔ sɔhwɛ so si nsɛm a ɛtwa toɔ no so dua ɛfiri sɛ bonding adwumayɛ gyina card substrate, ink system, lamination temperature, pressure ne production cycle so.

Mfaso Titiriw a Ɛwɔ Ahobammɔ ne Nneɛma a Wɔyɛ Mu

Nokwaredi a Wotumi Hu a ɛwɔ Dynamic Rainbow Effect

Holographic nhyehyɛe a wɔayɛ no embossed no ma kɔla sesa optical effect wɔ hann a ɛsakra ne hwɛbea ahorow ase. Saa ade a ɛda adi pefee yi ma wɔn a wɔde kaad ma, wɔn a wɔhwɛ nneɛma so ne wɔn a wɔde di dwuma awiei no tumi yɛ nhwehwɛmu a ɛyɛ ntɛm a wɔde hwɛ nokware a wɔde aniwa hu a wonni nnwinnade titiriw biara.

Ahobammɔ a Wɔde Ma Wɔ Mfonini a Wɔyɛ ne Nsakrae a Wɔmma Ho Mma Ho

Ɛyɛ den sɛ wɔbɛsan ayɛ holographic mfonini denam tintim, scanning anaa photocopy a wɔtaa de di dwuma so. Sɛ wɔde ka bom wɔ nsɛm a wɔatintim anaa wɔayɛ ama obiara so a, sini no de akwanside foforo ka ho a ɛko tia kaad a wɔyɛ no abien, data a wɔde besi ananmu ne nea wɔbɛsakra no wɔ soro. Wobetumi asusuw adansi a ɛda adi sɛ wɔasakra no ho ama nnwuma a ɛhwehwɛ sɛ woyi adanse a wotumi hu fi hɔ.

Ahobammɔ a Ɛda Hɔ a Womfa Kaad Data Sie

Nneɛma a ɛda adi pefee ne nea ɛda adi fã bi no kora mfonini, din, nɔma, barcode ne mfonini ahorow a wɔatintim wɔ sini no ase no akenkan so. Wobetumi ayɛ pattern density ne placement sɛnea ɛbɛyɛ a ahobammɔ nkɛntɛnso no boa, sen sɛ ebesiw kwan, card nhwehwɛmu.

Surface Durability ma Kaad a Wɔtaa Di Ho Dwuma

Grades a wɔapaw ma scratch, wear ne UV resistance de boa ma wɔbɔ card graphics ho ban bere a woredi ho dwuma da biara da. Ɛsɛ sɛ wɔpaw adansi a ɛfata no sɛnea wɔhwɛ kwan sɛ wɔde bɛyɛ adwuma, wim tebea, abrasion level ne card-issuance standard.

Nkitahodi a ɛne Card Lamination Adwumayɛbea

Wobetumi de sini no ama ama ɔhyew anaa awɔw lamination na wɔde PVC, PET, ABS ne composite card structures asusuw ho. Wallis kamfo kyerɛ sɛ wɔnyɛ sɔhwɛ ansa na wɔayɛ no denam core sheet ankasa, overlay, ink, adhesive, chip anaa antenna inlay ne lamination cycle a adetɔfo no de di dwuma no so.

Holographic Nhwɛso ahorow a wɔahyɛ da ayɛ ma Brand ne Program Control

Amanneɛbɔ ahorow betumi ayɛ logos, brand marks a wɔsan yɛ, microtext, guilloche lines, geometric elements ne controlled pattern placement. Saa nneɛma yi boa wɔn a wɔde kaad ma no ma wɔyɛ ade a wotumi hu na ɛtew ahotoso a wɔde to generic stock designs so no so.

Nneɛma a Wɔpaw ma B2B Kaad Nnwuma

Ahobammɔ-sini adwuma a edi mu hwehwɛ pii sen sɛ wobɛpaw sɛnea obi bɛyɛ sɛ nyankontɔn. Ɛsɛ sɛ sini nhyehyɛe no ne kaad nhyehyɛe, nnwinnade a wɔde yɛ, ɔkwan a wɔfa so hwɛ ne nhyehyɛe a wɔde bɛtɔ nneɛma no hyia. Wallis betumi aka nsakraeɛ a ɛdidi soɔ yi ho asɛm wɔ sampling ne quotation mu.

Ka Wo Security Film Specification ho asɛm

Holographic Laser Rainbow Film a Wɔde Di Dwuma

Saa sini yi yɛ nea wɔayɛ ama adwumayɛfoɔ kaad ne secure-document production wɔ baabi a ɛho hia sɛ wɔnya nokware a wotumi hu, ɔfasuo ho banbɔ ne nsonsonoeɛ a ɛda nneɛma a wɔyɛ mu.

Aban ID Card ne Karka Tumi Krataa

Holographic layer a ɛda adi pefee betumi abɔ mfonini ne asetra ho nsɛm ho ban bere a ɛde ade a ɛda adi pefee a nhwehwɛmufo betumi ahu wɔ hann a ɛfata mu ka ho no. Wobetumi de amanne kwan so nhyehyɛe ahorow no ahyia ne tumidi a ɛde ma no nipasu a wotumi hu.

Adwumayɛfo Badge ne Access Control Cards

Nnwumakuw, sukuupɔn ne adwumayɛbea-akwan ho nkrataa betumi de nyankontɔn nkɛntɛnso no adi dwuma de aboa adansedi nkrataa a wogye tom ntɛmntɛm na ɛmma wontumi nwo a wɔmma ho kwan. Wobetumi de magnetic stripe, contact chip, contactless ne RFID card nhyehyɛe asusuw sini no ho.

Sikakorabea, Katua ne Asɔremma Kaad

Holographic nhyehyɛe a wɔayɛ no sɛnea wɔpɛ de anim a ɛyɛ fɛ ne nokware a wotumi hu ka sikasɛm, nokwaredi ne asɔremma nkrataa ho. Ɛsɛ sɛ wɔde nsusuwso a wɔde besisi hɔ no ne nsaano nkyerɛwee panels, magnetic stripes, chips, personalization zones ne mmeae a wɔhwehwɛ sɛ mfiri betumi akenkan no yɛ biako.

Smart Kaad ne RFID Kaad

Wobetumi de sini no ahyɛ multilayer smart-card production mu bere a wɔasɔ nea ɛne ne ho hyia ahwɛ awie no. Ɛsɛ sɛ wɔn a wɔyɛ kaad no di lamination suban, flatness, chip-module installation ne antenna adwumayɛ ho adanse denam production nhyehyɛe a etwa to no so.

Tumi krataa, Adansedi nkrataa ne Tekete a Ahobammɔ

Wobetumi nso de sini adansi a ɛfa adwuma pɔtee bi ho adi dwuma ama nkrataa nkratafa a wɔde laminated, adansedi nkrataa, tekiti a ne bo yɛ den ne brand-protection applications. Ɛsɛ sɛ wɔsi so dua sɛ ɛfata sɛdeɛ krataa no mu nneɛma, ahobanbɔ gyinabea ne nsakraeɛ nhyehyɛeɛ teɛ.

Sɛnea Wɔde Sini no Bɛka Kaad a Wɔyɛ Mu

1. Si Finished-Card Nhyehyɛe no so dua

Fa core material, overlay material, total card thickness, tintim kwan, chip anaa antenna nhyehyɛe ne ɔsom tebea a wɔhwehwɛ ma. Saa nsɛm yi na ɛkyerɛ sini mu abasobɔde a ɛsɛ sɛ wɔde yɛ nhwɛso.

2. Kyerɛkyerɛ Ahobammɔ ne Aniwa so Ahwehwɛde ahorow mu

Paw stock pattern anaa fa adwinni kɔma ma hologram a wɔahyɛ da ayɛ. Kyerɛ mmeae a ɛho hia a wɔde data, mfoniniyɛ mmeae, nneɛma a mfiri tumi kenkan ne mmeae biara a ɛsɛ sɛ wɔtew nhwɛsode no so anaasɛ wɔyi fi mu.

3. Sɔ Lamination ne Bonding hwɛ

Fa ɔhyew, nhyɛso, bere a wɔde tra hɔ ne ɔkwan a wɔfa so yɛ onwini a wɔahyɛ da ayɛ no yɛ pilot test. Hwɛ adhesion, flatness, transparency, optical consistency, print akenkan ne ahoɔden a ɛko tia delamination.

4. Fa Finished-Card Adwumayɛ no Di Dwuma

Hwɛ kaad a wɔawie no mu hwɛ sɛ ɛyɛ bending, abrasion, ɔhyew, humidity, UV exposure na ɛne personalization anaa encoding mfiri hyia sɛnea customer no mu gyinapɛn anaa project specification kyerɛ.

5. pene Production Sample no so

Ɛsɛ sɛ wofi ase yɛ sini no pii bere a wɔapene nea efii sini no anim, ne nsusuwii, nea wɔde twitwiw, nea wɔde kyekyere, bonding ne nea wɔawie-kaad sɔhwɛ mu aba so nkutoo. Nhwehwɛmu nhwɛsode a wɔapene so a wɔbɛkora so no boa ma ɛkɔ so yɛ pɛ wɔ ahyɛde ahorow a wɔsan yɛ no nyinaa mu.

Nsɛm a Ɛho Hia Na Wɔafa Nsɛm a Wɔafa Ka a Ɛyɛ Pɛ

Sɛnea ɛbɛyɛ a wobɛtew nhwehwɛmu ne nsɛm a wɔafa aka ho nhyehyɛe no so no, fa nsɛm a edidi so yi pii ka wo nsɛmmisa no ho sɛnea wubetumi:

• Nneɛma a wɔde yɛ sini: PET anaa PVC

• Nea wɔhwehwɛ sɛ ɛyɛ kɛse, ne tɛtrɛtɛ, ne roll tenten anaa ne kɛse

• Hwɛ a ɛda adi anaasɛ ɛyɛ fã bi a ɛda adi

• Stock holographic nhwɛso anaasɛ amanne kwan so nhyehyɛe

• Card substrate ne layer nhyehyɛe a edi mũ

• Ɔhyew anaa awɔw lamination nhyehyɛe

• Ɔkwan a wɔfa so tintim ne nea wɔyɛ no sɛnea wopɛ

• Nhwɛsoɔ dodoɔ, sɔhwɛ dodoɔ ne afe afe ahwehwɛdeɛ a wɔasusu

• Ɛhwehwɛ sɛ wɔde nneɛma gu mu, wɔde nkyerɛwde gu so ne baabi a wɔrekɔ gua

Nya Factory Quotation a Wɔde Kyerɛw Nsɛm

Dɛn Nti na Wopaw Wallis Holographic Sini?

Factory-Tẽẽ B2B Nneɛma a Wɔde Ma

Wallis boa card manufacturers, converters, printing companies ne project contractors de specification nkɔmmɔbɔ, sampling, customized dimensions ne bulk production. Mfiridwuma ho nkitahodi tẽẽ boa ma wɔtew sini no ne adetɔfo no kaad nhyehyɛe a ɛnhyia no so.

Card-Material Nkabom Mmoa

Wɔ holographic film akyi no, Wallis de card-production nneɛma te sɛ PVC core sheets, PET/PETG nneɛma, overlay films ne card components a ɛfa ho ma. Eyi ma ɛyɛ mmerɛw sɛ wɔbɛsɔ holographic layer no ahwɛ sɛ laminated card nhyehyɛe a edi mũ no fã.

Amanne Nkɔso ne Nhwɛsode

Adetɔfoɔ bɛtumi abisa project-specific thickness, dimensions, transparency ne optical patterns. Sampling ma adetɔfoɔ no tumi si aniwa so adwumayɛ, bonding ne production compatability so dua ansa na wahyɛ bɔ sɛ ɔbɛyɛ order kɛseɛ.

Export Packaging ne Repeat-Order Control

Wobetumi ayɛ roll ne sheet packaging ho nhyehyɛe de abɔ film no ani, anoano ne winding ho ban bere a wɔde amanaman ntam rekɔ no. Wobetumi akora nkyerɛkyerɛmu a wɔapene so ne nhwɛsode ahorow a wɔde gyina so no so de aboa repeat-order consistency.

Wɔn a Wɔyɛ Kaad a Wɔsom Wɔ Wiase Nyinaa

Wallis ne amanaman ntam adetɔfoɔ yɛ adwuma wɔ nhwɛsoɔ nhwehwɛmu, specification confirmation, bulk production ne export delivery. Mfiridwuma ho ahwehwɛde ahorow a emu da hɔ ne nhwɛsode a wɔapene so ne fapem a ɛbɛma wɔayɛ biako a ɛyɛ pintinn wɔ nneɛma a wɔayɛ no sɛnea wɔpɛ wɔ ahobammɔ-kaad ho.

Company no da biara da dwumadi

Adetɔfoɔ Nkitahodi ne Dwumadie Mmoa

B2B security-film projects taa hwehwɛ sɛ wɔyɛ specification checking ne sample feedback mpɛn pii. Wallis nam adwinni a wɔde si so dua, sɔhwɛ a wɔyɛ, adwumayɛ mu nhwehwɛmu ne nhyehyɛe a wɔyɛ de san kra nneɛma so boa adetɔfo.

Nsɛm a Wɔtaa Bisa

Dɛn na wɔde holographic laser nyankontɔn sini di dwuma?

Wɔde di dwuma sɛ ahobammɔ ne ahobammɔ a wotumi hu wɔ ID kaad, akwan a wɔfa so kɔ hɔ, smart card, sikakorabea kaad, karka tumi krataa ne adansedi nkrataa afoforo mu. Optical nhyehyɛe no sesa bere a wɔhwɛ no, na ɛboa wɔn a wɔde di dwuma no ma wohu kaad a ɛyɛ nokware bere a wɔbɔ nsɛm a ɛwɔ sini no ase ho ban no.

So sini no wɔ PET ne PVC mu?

Aane. PET ne PVC a wobetumi apaw no wɔ hɔ. Ɛsɛ sɛ wɔpaw nneɛma a ɛfata sɛnea kaad no substrate, lamination nhyehyɛe, ahwehwɛde a ɛtra hɔ kyɛ ne finished-card nhyehyɛe te.

Nneɛma a ɛyɛ den bɛn na Wallis betumi de ama?

Nneɛma a ɛwɔ hɔ no taa yɛ 20–100 μm. Nea etwa to no mu duru gyina ahobammɔ nkɛntɛnso, kaad adansi, bonding kwan ne total finished-card thickness a adetɔfo no hwehwɛ so.

So holographic nhyehyɛe no betumi aka yɛn logo anaa microtext no ho?

Aane. Nneɛma a wɔayɛ no sɛnea wɔpɛ no betumi ayɛ logos, microtext, guilloche lines, brand elements a wɔsan yɛ bio ne project-specific graphics. Ɛsɛ sɛ wɔsi adwini a ɛbɛtumi ayɛ yie, mfitiaseɛ ahwehwɛdeɛ, MOQ ne nkɔsoɔ ho ka so dua ansa na wɔayɛ.

So sini no bɛka kaad ho nsɛm a wɔatintim ho asɛm?

Wɔayɛ abasobɔdeɛ a ɛda adi ne nea ɛda adi fã bi sɛdeɛ ɛbɛyɛ a wɔbɛtumi ahunu mfonini, din, nɔma ne mfonini a wɔatintim. Wobetumi ayɛ nsakrae wɔ pattern density ne placement mu na ama data mmeae a ɛho hia no akɔ so akenkan.

So ɛne PVC, PET ne ABS kaad hyia?

Wobetumi de PVC, PET, ABS ne nneɛma a wɔabom ayɛ a ɛne no hyia asusuw sini no ho. Esiane sɛ ɛsono ink, adhesives ne lamination tebea nti, Wallis kamfo kyerɛ sɛ wɔnsɔ adetɔfo nneɛma ankasa hwɛ ansa na wɔayɛ no pii.

So wobetumi de ayɛ lamination a ɛyɛ hyew ne nea ɛyɛ nwini?

Hot-lamination ne cold-lamination options wɔ hɔ a egyina film a wɔapaw no adansi so. Kyɛ wo nnwinnade ne dwumadie tebea sɛdeɛ ɛbɛyɛ a wɔbɛtumi akamfo abasobɔdeɛ a ɛfata akyerɛ.

So sini no de adanse a ɛkyerɛ sɛ wɔayɛ nsakrae ma?

Holographic layer betumi ama ayɛ den kɛse sɛ wɔbɛyɛ mfonini ne nsakrae, na adan a ɛda adi sɛ wɔsakra no betumi ada ɔsɛe a wotumi adi bere a wɔabɔ mmɔden sɛ wobeyi afi hɔ akyi. Ɛsɛ sɛ wɔkyerɛ tamper suban a wɔhwehwɛ na wɔsɔ hwɛ sɛnea wɔpɛ sɛ wɔyɛ kaad nhyehyɛe no.

So yebetumi abisa nhwɛsode ahorow ansa na yɛakra nneɛma pii?

Aane. Wɔkamfo sampling kyerɛ sɛ wɔmfa nsi optical hwɛbea, transparency, adhesion, lamination suban ne finished-card adwumayɛ so dua. Fa wo botae ho nkyerɛkyerɛmu ne kaad nhyehyɛe ma bere a worebisa nhwɛsode ahorow no.

Dɛn ne MOQ ma amanne holographic sini?

MOQ gyina sɛ ebia adwuma no de gyinapɛn anaa amanne kwan so nhwɛso di dwuma, ne sini no nneɛma, ne kɛse, ne nsusuwii, ne twitwiw ne nea wɔde kyekyere nneɛma. Fa wo dodow a woahyɛ sɛ wobɛkra no di Wallis ho nkɔmmɔ na woanya adwuma pɔtee bi ho nsɛm.

Nsɛm bɛn na ɛsɛ sɛ yɛde mena ma wɔkyerɛw krataa?

Yɛsrɛ sɛ fa nneɛma, ne kɛse, ne trɛw anaa krataa kɛse, nea ɛda adi pefee, holographic nhwɛso, kaad substrate, lamination kwan, nhwɛsode dodow, afe afe ahwehwɛde a wɔasusuw, nneɛma a wɔhwehwɛ ne ɔman a wɔrekɔ no ma.

Wohia holographic film a ɛne wo card line no hyia? Fa wo mfiridwuma ahwehwɛde ahorow a ɛfa nneɛma a wɔpaw, nhwɛsode nhwehwɛmu ne adwumayɛbea bo ho mena yɛn.

Wo ne Wallis nkasa na woanya Wo Dwumadi no