|
Wallis - PVC Agbalẽvi
Wallis ye nye esia
| Amadede: | |
|---|---|
| Nusi wotsɔ wɔe: | |
| viɖe: | |
| Agbɔsɔsɔ: | |
Wallis brushed metal PVC film for furniture panels wɔa sika, klosalo, alo ga ƒe dzedzeme si wowɔ ɖe ɖoɖo nu si ŋu wokɔ evɔ mehiã be woatsɔ ga sesẽ adze ŋgɔe o. Wowɔ atsyɔ̃ɖoɖo ƒe film si te ŋu trɔna bɔbɔe la na kabinet ʋɔtruwo, awudzraɖoƒewo, gliwo, mamawo, asitsaƒewo, ɔfis xɔmenuwo, amedzrodzeƒewo, kple xɔmenuwo ƒe akpa bubu siwo wotsɔ lãgbalẽ wɔe.
Mɔfiame si wotsɔ brɔs wɔe la naa nukpɔkpɔ ƒe goglome kpena ɖe eŋu esime wòle kpekpem ɖe xɔmenuwo wɔlawo ŋu be woakpɔ anyigba si le abe ga ene si mewɔa tɔtrɔ o le ewɔwɔ ƒe hatsotso gãwo me. Woate ŋu aƒo nu tso amadede, brɔs ƒe mɔfiame, anyigba ƒe keklẽ, eƒe titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, megbedede ƒe atikewɔwɔ, kple ametakpɔnu film ŋu le nusi wotsɔ wɔe, lamination dɔwɔnuwo, eŋudɔwɔwɔ, kple nudɔdɔ ƒe nudidiwo nu.
Bia be woawɔ Brushed Metal Film ƒe Kpɔɖeŋu
| Nu si wowɔ | Sika Kple Klosalo Ga si Wotsɔ Brush Wɔe PVC Atsyɔ̃ɖoɖo Film |
|---|---|
| Nusiwo Wozãna le Gɔmeɖoanyi | PVC atsyɔ̃ɖoɖo ƒe sinima |
| Amadede ƒe Mɔfiame si Woɖo Ðe Ðoɖo Nu | Sika si wotsɔ brɔs kple klosalo si wotsɔ brɔs ƒoe |
| Amadede ƒe Tiatia Siwo Wotrɔ Asi Le | Champagne sika, akɔbli, akɔbli, rose sika, gunmetal, kple ga ƒe gbeɖiɖi bubu siwo woate ŋu awɔ kpɔɖeŋui |
| Texture ƒe Tiatiawɔblɔɖe | Mɔfiame ƒe brɔs, ɖa nyui, atitsoga-brɔs, alo ga ƒe nɔnɔme si wowɔ ɖe ɖoɖo nu ne woɖo kpe ewɔwɔ dzi |
| Eƒe titrime | Wotrɔ asi le eŋu le dɔbiagbalẽvi kple dɔwɔwɔ ƒe nudidiwo nu |
| Kekeme kple Roll ƒe Didime | Wotrɔ asi le eŋu le ewɔwɔ ƒe ŋutete kple nudɔdɔ ƒe nɔnɔme nu |
| Dɔwɔwɔ ƒe Mɔnuwo | Flat lamination, profile wrapping, membrane alo vacuum pressing, kple xɔmenuwo ƒe anyigbadzidɔwɔwɔ bubu siwo ŋu woda asi ɖo |
| Substrates Siwo Sɔ Kple Wo Nɔewo | MDF, plywood, particle board, kple xɔmenuwo ƒe akpa bubu siwo sɔ le adhesive kple dɔwɔwɔ dodokpɔ vɔ megbe |
| Tiatia Siwo Le Anyigba Dzi | Takpɔnu si wotsɔna ƒoa ta, si te ŋu ƒoa ɖi, si te ŋu ƒoa ɖi, si te ŋu nɔa te ɖe tsi nu, eye wòkɔa wo ŋu bɔbɔe ƒe tiatia siwo ŋu woɖo kpee be woɖo kpe wo dzi le dzeside nu |
| Dɔbiagbalẽviwo | Kabinetwo, awudzraɖoƒewo, ʋɔtruwo, gliwo, xɔmenuwo ƒe atsyãwo, asitsaƒewo ƒe ɖeɖefiawo, ɔfis xɔmenuwo, kple asitsaƒewo ƒe xɔmenuwo |
| Trɔ asi le eŋu | Amadede, brɔs ƒe nɔnɔme, keklẽ, titrime, didime, megbedede, ametakpɔnu film, dzeside, kple nubablɛwo |
De dzesii: Xɔtutu mamlɛtɔ kple dɔwɔwɔ nɔ te ɖe film ƒe hatsotso si wotia, nusi wotsɔ blae, eƒe titrime, nusi wotsɔ blae, nusi wotsɔna léa nu ɖe eŋu, nɔnɔme siwo me woawɔ dɔ le, kple nuto si me woɖo be woawɔe dzi. Ðo kpe nudidiwo katã dzi to kpɔɖeŋu kple ewɔwɔ dodokpɔ si dzi woda asi ɖo me hafi nàwɔe le agbɔsɔsɔ gã me.
Sika PVC film si wotsɔ brɔs wɔe la wɔa ga ƒe gbeɖiɖi si me dzo le si sɔ na kabinet deŋgɔwo, awudzraɖoƒe ƒe ŋgɔgbe, atsyɔ̃ɖoɖo ƒe atsyɔ̃ɖonuwo, gli ƒe xɔmenuwo, amedzrodzeƒe ƒe xɔmenuwo, atsyɔ̃ɖonuwo ƒe ɖeɖefiawo, atsyɔ̃ɖonuwo ƒe kplɔ̃wo, kple asitsaƒe dzeaniwo ƒe xɔmenuwo. Ewɔa ɖeka nyuie kple yevu, ɣi, aŋutiɖiɖi si me dzo le, kpe xɔasi si nye marble, ati viviti, walnut, kple nu falɛfalɛ siwo mewɔa akpa aɖeke o.
Woate ŋu atrɔ asi le sika ƒe gbeɖiɖi ŋu tso sika ɣi si le keklẽm dzi va ɖo champagne, akɔbli, alo ga dzodzoe si me mekɔ o ƒe ŋusẽkpɔɖeamedzi siwo fa wu dzi. Esi wònye be akaɖi kple brɔs ƒe mɔfiame kpɔa ŋusẽ ɖe ga ƒe amadede dzi vevie ta la, ele be woada asi ɖe dzedzeme mamlɛtɔ dzi to kpɔɖeŋu ŋutɔŋutɔ zazã me le dɔa ƒe akaɖi si woɖo be woawɔ la te.
Klosalo si wotsɔ brɔs wɔe PVC film naa ga ƒe ŋusẽkpɔɖeamedzi dzadzɛ, mɔ̃ɖaŋununya, kple egbegbe tɔ na nuɖaƒewo, ɔfis ɖoɖowo, awudzraɖoƒewo, mɔ̃ siwo ƒo xlãe, nukpɔkpɔ ƒe kabinetwo, mamawo, kple egbegbe asitsanuwo. Ewɔa ɖeka le dzɔdzɔme nu kple xɔmenuwo ƒe amadede ɣi, dzoka xɔxɔ, kɔkrit, ahuhɔ̃e, ati fafɛ, blɔ, kple amadede ɖeka.
Woate ŋu ato klosalo si klẽna, si wotsɔ gakpo si mexɔ dzo o wɔe, aluminum matte, tu si do viviti wu, alo mɔfiame bubu siwo wowɔ ɖe ɖoɖo nu la awɔ klosalonu siwo wotsɔ wu enui. Ele be woaɖe amadede, keklẽ, kple nɔnɔme si hiã la gɔme le kpɔɖeŋuwo xɔɣi be woaƒo asa na vovototo siwo le screen nɔnɔmetatawo kple panel siwo wowɔ vɔ dome.
Atsyɔ̃ɖoɖo PVC ƒe anyigba ate ŋu agbugbɔ ga si wotsɔ brɔs wɔe ƒe nukpɔkpɔ awɔ esime wòtsɔ kpekpeme si le sue ŋutɔ kpe ɖe eŋu wu ga gbadzɛ sesẽ. Esia ate ŋu ana xɔmenuwo ƒe akpatawo zazã nanɔ bɔbɔe, aɖe agba si le ʋɔtruwo kple xɔtunuwo dzi dzi akpɔtɔ, eye wòado alɔ ga siwo wotsɔ wu enu la zazã geɖe wu le xɔmenuwo ƒe akpa gãwo dzi.
Le film ƒe grade kple titrime nu la, woate ŋu ada ga PVC film kpɔ hena flat lamination, profile wrapping, membrane pressing, kple shaped-panel dɔwɔwɔ tiatia. Alesi woate ŋu atrɔ ɖe nɔnɔmewo ŋui la naa adzɔnuwo wɔlawo kpɔa ablɔɖe geɖe wu le aɖaŋuwɔwɔ me wu ga sesẽwo, togbɔ be ele be woaɖo kpe didime suetɔ kekeake kple fesre si dzi woato awɔ dɔa dzi hã.
Ewɔwɔ si dzi wokpɔna kpena ɖe ame ŋu be ga ƒe gbeɖiɖi si woate ŋu agbugbɔ awɔ kple mɔfiame ƒe nɔnɔme nɔa xɔmenuwo ƒe akpa siwo sɔ me. Le ʋɔtru alo ʋuƒo siwo te ɖe wo nɔewo ŋu gome la, ele be adzɔnuwo wɔlawo nazã nusiwo tso hatsotso ɖeka si dzi woda asi ɖo me eye woalé film ƒe nɔnɔme si sɔ me ɖe asi le lãɖeɖe kple lãɖeɖe me.
Ga si ƒe dzedzeme le PVC film ate ŋu akpe ɖe eŋu woawɔ xɔmenuwo siwo dzena nyuie wu evɔ womewɔa wo wɔwɔ, wotso wo, wowua woƒe nugbɔ, kple woƒe gowo ƒe dɔwɔwɔ si do ƒome kple ga-gbadzɛwo tutu geɖe o. Gazazã bliboa gakpɔtɔ nɔ te ɖe film la ƒe nɔnɔme, nusi wotsɔ blae, nusi wotsɔ léa nu ɖe eŋu, dɔwɔlawo, ewɔwɔ ƒe agbɔsɔsɔme, kple dɔwɔwɔ si hiã dzi.
Linear texture nyuiwo naa brushed-metal ƒe dzedzeme si ɖe dzesi la dona. Taɖa ƒe fli dzɔdzɔe, brɔs si keke wu, brɔs si wotsɔ atitsoga wɔe, si mewɔ ɖeka kple ɖoɖo o, alo esi wowɔ ɖe ɖoɖo nu ate ŋu ana wòadze kple asikaka ame ŋu le mɔ vovovowo nu. Ele be woagblɔ nuŋɔŋlɔ ƒe mɔfiame le nɔnɔmetatawo dzi ne ele be akpa geɖewo nasɔ ɖe wo nɔewo nu le nukpɔkpɔ nu.
Dzeside tiatia aɖewo ate ŋu anye atike si woatsɔ akpɔ anyigba tae be wòate ŋu anɔ te ɖe ɖiƒoƒo siwo wowɔna edziedzi nu, dzadzɛnyenye, kple aŋɔ si me kɔ nyuie wu. Ele be woagblɔ dodokpɔmɔnu si hiã le nyayɔyɔ me elabena nyawo abe alesi wòte ŋu ƒoa nu, si te ŋu ƒoa ɖi, kple esi te ŋu nɔa te ɖe atikewo nu ene ate ŋu atsi tre ɖi na dɔwɔwɔ ƒe seƒe vovovowo.
PVC atsyɔ̃ɖoɖo film naa anyigba si me ʋuʋudedi mele o si ate ŋu anɔ te ɖe xɔme tsidzadza si sɔ nu. Gake alesi kabinet alo ʋuƒo si wowɔ vɔ ƒe tsi mate ŋu age ɖe eme o hã nɔ te ɖe nusi wotsɔ blae, nusi wotsɔ léa nu ɖe eŋu, eƒe goawo, eƒe ƒunukpeƒewo, nusiwo wotso, kple eɖoɖo dzi. Dɔ siwo wowɔna le teƒe siwo tsi le la bia be woatre nu goawo nu nyuie eye woado wo kpɔ le ʋuƒoa dzi bliboe.
Amadede ƒe liƒo kple dzoxɔxɔ ƒe mɔɖeɖe ɖe nu ŋu toa vovo le amadede, eƒe gota gome ƒe wɔwɔme, nusi wotsɔ blae, nusi léna ɖe nu ŋu, kple nɔnɔme siwo me wòle nu. Ele be nuƒlelawo nana dzoxɔxɔ si wokpɔ mɔ na, didime tso dzoxɔxɔtsoƒewo gbɔ, fesre ƒe keklẽ, kple UV alo tsitsi dodokpɔ si hiã ale be woate ŋu akpɔ film ƒe dzesi si sɔ.
Flat lamination sɔ na cabinet panels, awudzraɖoƒe ƒe ʋɔtruwo, kplɔ̃ ƒe akpawo, gli ƒe akpawo, asitsaƒewo ƒe nuzazãwo, kple akpa bubu siwo le gbadzaa. Ele be ʋuƒoa nanɔ gbadzaa, wòanɔ dzadzɛ, wòaƒu, eye wòali ke le eƒe didime nu elabena nusiwo gblẽ le nusi le ete ŋu ate ŋu anɔ dzedzem to ga si le edzi la dzi.
Woate ŋu azã film ƒe dzesi siwo sɔ na MDF ʋɔtru siwo ƒe nɔnɔme le abe mɔ ene kple ʋuƒo siwo woɖo to membrane alo vacuum pressing me. Ele be woalé ŋku ɖe film ƒe didime, eƒe nɔnɔme ƒe tɔtɔ, dzogoe ƒe dɔwɔwɔ, dzoxɔxɔ ƒe dzoxɔxɔ, adhesive ƒe dɔwɔwɔ, kple fafa ŋu le ewɔwɔ dodokpɔ me.
Profile wrapping ate ŋu awɔ brushed-metal dzedzeme ɖe trims, frames, mouldings, shelving goawo, kple profile tiatia aɖewo ŋu. Ele be film ƒe megbedede, adhesive, profile geometry, line ƒe duƒuƒu, pressure, kple preheating nɔnɔmewo nasɔ kple alesi wowɔa dɔae.
MDF: kabinet ʋɔtruwo, routed panels, awudzraɖoƒe ƒe ŋgɔgbe, kple gli-panel ɖoɖowo.
Particle board: xɔmenuwo ƒe akpa siwo le gbadzaa, agbalẽdzraɖoƒewo, kplɔ̃wo, kple nudzraɖoƒewo.
Plywood: xɔmenuwo tiatia kple asitsaƒe ƒe xɔmenuwo le anyigba dzadzraɖo vɔ megbe.
Substrate bubuwo: woateŋu ada PVC , W PC , ga, alo nusiwo wotsɔ ƒo ƒu ƒe anyigba siwo sɔ la kpɔ to adhesive kple process testing me.
Nuxlɔ̃ame le dɔwɔwɔ ŋu: Mègatsɔe gbeɖe be adhesion tso substrate ŋkɔ ɖeɖeko me o. Ŋusẽ si le anyigba dzi, tsidzadza, nusi wotsɔ blaa nu, nusi wotsɔ blaa nu, atike si wotsɔna léa nu ɖe nu ŋu, dzoxɔxɔ si le ewɔwɔ, nyaƒoɖeamenu, kple subɔsubɔ ƒe nɔnɔmewo katã kpɔa ŋusẽ ɖe kadodo ƒe dɔwɔwɔ dzi.
Klosalo si wotsɔ brɔs wɔe ate ŋu ado alɔ egbegbe nuɖaƒe kple awudzraɖoƒe siwo wowɔ nyuie, evɔ sika si wotsɔ brɔs wɔe ate ŋu ana atsyɔ̃ɖoɖo ƒe gbeɖiɖi si me dzo le nado. Woate ŋu azã film la le ʋɔtrua ƒe ŋgɔgbe blibowo dzi alo abe nusi wowɔ ɖekae ene kple amadede sesẽwo, atikutsetsewo, kpe xɔasi siwo wotsɔ kpe xɔasiwo wɔe, ahuhɔ̃e, alo kpe.
Atsyɔ̃ɖonu gãwo ate ŋu azã ga film atsɔ awɔ gli siwo woɖena fiana, amedzrodzeƒea ƒe megbenyawo, ʋufɔti siwo ƒo xlãe, xɔdɔme ƒe gbeɖiɖiwo, kpekpewɔƒewo, nuɖuɖudzraƒewo ƒe emenuwo, kple amedzrodzeƒea ƒe dutoƒo teƒewo. Ele be woawɔ ɖoɖo ɖe mɔfiamewo ƒe ɖoɖowɔwɔ kple akaɖiwo ŋu hafi woatso ʋuƒoa.
Sika kple klosalo ƒe nuwuwu sɔ na atsyɔ̃ɖomidzraƒewo, atsyɔ̃ɖonuwo ɖeɖefiaƒewo, atsyãdzraƒewo, elektrɔnikmɔ̃wo ɖeɖefiawo, nudzraɖoƒewo, agbalẽdzraɖoƒewo, dzesiwo ƒe megbenyawo, kple amedzrodzeƒexɔwo. Ga ƒe amadede siwo wowɔ ɖe ɖoɖo nu ate ŋu akpe ɖe ame ŋu be wòawɔ ɖeka kple anyigbaa kple adzɔnu ƒe dzeside kple fiase me akaɖiwo.
Ɔfis nudzraɖoƒe, amedzrodzeƒewo, kpekpewɔƒewo ƒe xɔmenuwo, amedzrodzeƒe ƒe nuzazãwo, nuɖuɖudzraƒewo ƒe nudzraɖoƒewo, kple asitsaƒewo ƒe mamawo ate ŋu azã ga film si wotsɔ brɔs wɔe abe nusi wotsɔ blaa nu bliboe alo gbeɖiɖi ƒe nuwuwu ene. Ele be teƒe siwo woate ŋu aƒo nu geɖe le nazã dzeside si wodo kpɔ le alesi wòhiã be woatsɔ aŋe kple dzadzɛnyenye ŋu.
Sika si wotsɔ brɔs wɔe wɔa dɔ nyuie le amedzrowɔwɔ, atsyɔ̃ɖoɖo, atsyɔ̃ɖonuwo, aƒewo, kple asitsaƒe nyuitɔwo ƒe dɔwɔnawo me. Zãe tiatiatɔe le feature panels, trims, hands, drawer fronts, alo display elements dzi be teƒe gãwo nagazu nusi gbɔ eme le nukpɔkpɔ me o.
Klosalo si wotsɔ brɔs wɔe sɔ na nuɖaƒe siwo mehiã boo o, ɔfis xɔmenuwo, elektrɔnikmɔ̃wo ƒe ɖeɖefiawo, mɔ̃ɖaŋudɔwɔƒewo, awudzraɖoƒewo, kple egbegbe gliɖoɖowo. Woate ŋu atsɔ ati dzodzoe afae alo atsɔ yevu, aŋutiɖiɖi, kɔkrit, kple ahuhɔ̃e awɔe wòazu dɔwɔƒewo wu.
Brɔs tsɔtsɔ le tsitrenu ate ŋu ana awudzraɖoƒe ƒe ʋɔtru kɔkɔwo nadze didi wu, gake brɔs tsɔtsɔ le tsia dzi ate ŋu ate gbe ɖe kekeme dzi le agbalẽdzraɖoƒewo, kplɔ̃wo, alo gliwo ŋu. Ne èdi ƒuƒoƒo siwo sɔ la, de dzesi mɔ̃a ƒe mɔfiame le nutata siwo wowɔ dzi eye nàna kakɛ siwo katã te ɖe wo nɔewo ŋu nasɔ ɖe ɖoɖo nu.
Ganuwo trɔa woƒe dzedzeme ne wokpɔe ƒe dzogoe, ŋkeke ƒe keklẽ, akaɖi wɔwɔe si me dzo alo fafɛ le, keklẽ, kple amadede siwo ƒo xlã wo. Da asi ɖe film ŋutɔŋutɔ kple laminated panel si wowɔ vɔ dzi le dɔa ƒe akaɖi ŋutɔŋutɔ alo esi wowɔ abe ɖe wowɔe ene te hafi nàwɔe.
Brushed PVC film, ga sesẽ gbadzɛ, ga ƒe amadede, kple atsyɔ̃ɖoɖo ƒe agbalẽ sesẽwo kpɔa aɖaŋu kple ewɔwɔ ƒe nudidi vovovowo gbɔ. Nusiwo gbɔna tsɔtsɔ sɔ kple wo nɔewo naa mɔfiame le nuƒle ŋu le mɔ gbadza nu; ele be woatu tiatia mamlɛtɔ ɖe kpɔɖeŋu ŋutɔŋutɔwo, mɔ̃ɖaŋu ŋuti nyatakakawo, dɔwɔwɔ ƒe dodokpɔwo, kple dodokpɔ blibo si wowɔ le akpata me dzi.
| Tiatia | Nu Brushed Ga PVC Film | Ga Sesẽ Gbalẽ | Ga Dada alo Nutsyɔnu | Sesẽ Ga Atsyɔ̃ɖoɖo Agbalẽvi |
|---|---|---|---|---|
| Dzedzeme | Brushed-metal ƒe ŋusẽkpɔɖeamedzi si wota alo nuŋɔŋlɔ si woate ŋu agbugbɔ awɔ | Ga vavãtɔ ƒe anyigba kple nusi wotsɔ wɔe ƒe goglome | Ga si wotsɔ ƒu gbe alo roller-coated ga ƒe ŋusẽkpɔɖeamedzi | Nukpɔkpɔ ƒe goglome kɔkɔ kple grade-koŋ ƒe anyigba ƒe wɔwɔme |
| Kpekpeme | Atsyɔ̃ɖoɖo ƒe ƒuƒoƒo si le bɔbɔe | Zi geɖe la, eƒe kpekpeme lolona wu | Kpekpeme si bɔbɔ kpe ɖe eŋu | Eto vovo le polymer kple agbalẽa ƒe titrime nu |
| Dɔwɔwɔ tso eŋu | Lamination, wrapping, alo tiatia aɖewo wɔwɔ ƒe mɔnuwo | Lãɖeɖe, ƒoƒo, nuwo ɖɔɖɔɖo, nugbɔwo wuwu, kple gaŋutiɖoɖo | Dzadzraɖo ɖe anyigba dzi, eŋudɔwɔwɔ, eƒe dɔyɔyɔ, kple atike si wua atike si wotsɔna ƒua gbe ɖe edzi dzi ɖuɖu | Lãɖeɖe kple lamination le agbalẽ ƒe wɔwɔme nu |
| Texture Mɔfiame | Ele be woaɖo agbalẽ xatsaxatsa ƒe mɔfiame si dzi wokpɔna la ɖe ɖoɖo nu | Dzɔdzɔme alo mɔ̃ si wotsɔ brɔs wɔe ƒe mɔfiame | Enɔ te ɖe alesi wotsɔa nu ƒoa nui kple alesi wotsɔa nu ƒoa nui ƒe aɖaŋu dzi | Enɔ te ɖe xɔ si wota, si wofa, alo esi woŋlɔ ɖe edzi dzi |
| Trɔ asi le eŋu | Amadede, nɔnɔme, keklẽ, nɔnɔme, titrime, kple agbalẽ xatsaxatsa ƒe lolome | Alloy, coating, brushing, kple fabrication ƒe tiatia | Amadede gbadzaa kple atike si wotsɔna ƒua gbe ƒe ŋusẽkpɔɖeamedzi si te ŋu trɔna ɖe nɔnɔmewo ŋu | Amadede kple nuwuwu ƒe tiatia nɔ te ɖe amesi wɔe dzi |
| Dɔwɔɖoɖo si Wozãna ƒe Fit | Xɔmenuwo, kabinetwo, xɔmenuwo, xɔmenuwo, kple asitsaƒewo ƒe xɔmenuwo ƒe agbɔsɔsɔme si lolo ŋutɔ | Xɔtuɖaŋu ŋuti nyatakaka deŋgɔwo kple ga ƒe akpa siwo wɔa dɔ nyuie | Xɔmenuwo si wota ɖe ɖoɖo nu kple akpa siwo wowɔ sesẽ | Premium flat panels kple atsyɔ̃ɖoɖo tɔxɛ siwo wotsɔ ɖoa ŋkume |
Sand eye nàkɔ nusi le ete la ŋu le board kple adhesive dzrala ƒe mɔfiamewo nu. Ðe ke, ami, ka, ʋuʋudedi, kple nu suesuesuewo ɖa elabena ga siwo le wo ŋu ate ŋu aɖe ʋuƒoa ƒe gbagbãƒewo afia tsɔ wu be woaɣla wo.
Adhesive tiatia nɔ te ɖe film ƒe megbedede, substrate, line ƒe duƒuƒu, activation dzoxɔxɔ, nyaƒoɖeamenu, forming geometry, kple subɔsubɔ ƒe nɔnɔmewo dzi. Da kpe kadodo ƒe ŋusẽ, dzoxɔxɔ ƒe tsitsi, tsi ƒe dodo, nugbɔ kɔkɔ, kple atikewo ƒe ɖekawɔwɔ dzi to nusiwo wowɔ ŋutɔŋutɔ zazã me.
Dzoxɔxɔ si gbɔ eme, nyaƒoɖeamenu si mesɔ o, alo film ƒe tete si dzi womeɖu o ate ŋu atrɔ keklẽ, atrɔ brɔs ƒe nɔnɔme, ana wòaƒo ƒu, alo akpɔ ŋusẽ ɖe didime ƒe liƒo dzi. Ðo dɔwɔwɔ ƒe fesre si ŋu woda asi ɖo to dodokpɔ wɔwɔ me hafi nàwɔ nudɔdɔ gbogbo aɖewo.
Na ametakpɔnu film la nanɔ teƒea to lãɖeɖe, lãɖeɖe, asiléle, kple eɖoɖo ƒe afɔɖeɖe siwo sɔ me. Zã agbalẽ xatsaxatsa, kplɔ̃, asigɛ, kple nusiwo wotsɔ blaa nu dzadzɛwo be nàƒo asa na ʋuʋudedi, ʋuʋudedi, ɖiƒoƒo aŋe, kple asibidɛ ƒe dzesiwo.
Film ƒe kpɔɖeŋu si me mekɔ o meɖea alesi nusi wowɔ la adze le lamination megbe fiana bliboe o. Da asi ɖe amadede, keklẽŋusẽ, nɔnɔme, anyigba ƒe gbadzaƒe, nugbɔ ƒe dɔwɔwɔ, nulénu ƒe dɔwɔwɔ, kple dzadzɛnyenye ƒe nuwɔna dzi le dodokpɔ ƒe akpa si wowɔ vɔ si wotsɔ nusi wotsɔ wɔe la dzi.
Tsɔ microfiber avɔ dzadzɛ falɛfalɛ aɖe ɖa ke si me mekɔ o.
Tutu le mɔ si dzi wotsɔ brɔs ƒoe ɖo la nu ɣesiaɣi si wòanya wɔ.
Zã tsi dzadzɛ alo atike fafɛ si mewɔa akpa aɖeke o hena dzadzɛnyenye edziedzi.
Ðe ami, nuɖuɖu, atsyɔ̃ɖomi, nuŋlɔtsi, kple nunono ƒe ɖiwo ɖa enumake.
Ƒo asa na nusiwo wotsɔna ƒoa aŋɔe, gakpo ƒe lãfu, atikekui, akplɔ, kple brɔs siwo me mekɔ o.
Mègazã atike sesẽwo, acid, alkali, alo dɔlékuiwutike siwo dzi womeda asi ɖo o ne mèdo wo kpɔ le kpɔɖeŋu aɖe dzi o.
Tsitretsitsi ɖe dzadzɛnyenye ŋu toa vovo le nusiwo wotsɔ blaa anyigbae nu. Ele be asitsatsa ƒe xɔmenuwo nado atike si woɖo be woakɔ, woƒe susu tsɔtsɔ, ɣeyiɣi si woatsɔ atutu wo ŋu, kple alesi woatutu woe akpɔ hafi ada asi ɖe atike la dzi be woalé be nɛ edziedzi.
Na ga ƒe kpɔɖeŋu ŋutɔŋutɔ, amadede ƒe chip, panel si dzi woda asi ɖo, alo design reference si li ke. Wallis ate ŋu ada ga ƒe gbeɖiɖi si woɖo taɖodzinu na, keklẽ, brɔs ƒe atsyã, kple eƒe keklẽ kpɔ. Nɔnɔmetata si le screen dzi ɖeɖe mesɔ gbɔ be woada asi ɖe amadede mamlɛtɔ dzi o.
Ele be film ƒe titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, nu vevi ƒe lolome, ƒunukpeƒe ƒe mɔɖeɖe, mɔ si dzi woaƒoe ɖo, kple agbalẽ xatsaxatsa ƒe kpekpeme nasɔ kple asisi la ƒe ewɔwɔ kple dɔwɔnu siwo wotsɔ wɔa dɔe. Kpɔ kekeme si woate ŋu azã kple mɔ̃a ƒe mɔfiame dzi hafi nàbia.
Nuƒlelawo ate ŋu aɖe dodokpɔ siwo hiã be woatsɔ akpɔ amadede ƒe vovototo, keklẽ, ʋuʋudedi, ʋuʋudedi, nusiwo léna ɖe nu ŋu, dzoxɔxɔ ƒe tsitsi, tsidzadza, ɖiƒoƒo, atike siwo wotsɔna klɔa nu ŋu, alo dɔa ƒe nɔnɔme bubuwo me. Ele be woalɔ̃ ɖe dodokpɔmɔnu kple seɖoƒe siwo dzi woalɔ̃ ɖo dzi hafi woawɔe.
Woate ŋu aƒo nu tso film si kpɔa ame ta, agbalẽ xatsaxatsa, nuwuwu takpɔkpɔ, pallet mɔnu, ŋkɔwo, batch ƒe dzesidede, kple nusiwo wotsɔ ɖoa duta ŋu le nudɔdɔwo kple nudzraɖoƒe ƒe nudidiwo nu. OEM ƒe dzesidewo kple dɔa koŋ ƒe nubablɛ ŋuti mɔfiamewo le nudɔdɔ ƒe kpeɖodzi te.
Ga ƒe atsyã ƒe tiatia: sika si wotsɔ brɔs wɔe, klosalo si wotsɔ brɔs wɔe, kple ga ƒe amadede ƒe ŋgɔyiyi si wowɔ ɖe ɖoɖo nu.
Nusiwo woatsɔ awɔ xɔmenuwoe: nusiwo woatsɔ awɔ kabinetwo, awudzraɖoƒewo, gliwo ƒe akpawo, xɔmenuwo ƒe xɔmenuwo, asitsanuwo ƒe xɔmenuwo, kple asitsaƒewo ƒe xɔmenuwo tiatia.
Ewɔwɔ ɖe ɖoɖo nu: kpekpeɖeŋu na nɔnɔme, keklẽ, titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, megbedede, ametakpɔnu film, kple nubablɛwo.
Kpɔɖeŋuwo ƒe kpeɖodzi: kpɔɖeŋu ŋutɔŋutɔwo kple dodokpɔ siwo wowɔ le akpata si wowu enu kpena ɖe ame ŋu be amadede, dɔwɔwɔ, kple eƒe léle ɖe nu ŋu ƒe afɔkuwo dzi ɖena kpɔtɔna.
B2B dɔa ƒe kadodo: nɔnɔmewo me toto si wotu ɖe substrate, dɔwɔnuwo, adhesive, dɔwɔwɔ, nudɔdɔ agbɔsɔsɔme, kple yiyi asi dzi.
Dzro Wò Metallic Film Dɔwɔɖoɖoa Me
Be nàxɔ nyayɔyɔ si sɔ la, na ga ƒe amadede si hiã, brɔs ƒe nɔnɔme, keklẽ ƒe seƒe, eƒe titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, nusi wotsɔ lée, nusi wotsɔ léa nu alo lamination ƒe mɔnu, ezazã vɔ, agbɔsɔsɔme si wobu, dukɔ si me nèyi, film si kpɔa ame ta, nu vevi ƒe lolome, nusiwo wobla, kple dodokpɔ ŋuti nuŋlɔɖi siwo hiã.
Ne èdi amadede siwo wowɔ ɖe ɖoɖo nu la, ɖo nyatakaka ŋutɔŋutɔ aɖe ɖa ɣesiaɣi si wòanya wɔ. Le membrane tete alo profile wrapping, hã na panel geometry, wɔwɔ goglome, didime, dɔwɔnu ƒomevi, dɔwɔwɔ dzoxɔxɔ, kple adhesive nyatakakawo.
Ga si wotsɔ brɔs wɔe PVC film nye atsyɔ̃ɖoɖo ƒe nɔnɔmetata si te ŋu trɔna bɔbɔe si ƒe amadede nye ga kple mɔfiame si wowɔ be wòasrɔ̃ sika, klosalo, aluminium, akɔbli, alo ga bubu siwo wotsɔ brɔs wɔe ƒe dzedzeme le xɔmenuwo kple xɔmenuwo ƒe akpawo dzi.
Nusi wowɔna ɖaa nye PVC -si wotu ɖe atsyɔ̃ɖoɖo film si wɔa ga-dzedzeme ƒe ŋusẽkpɔɖeamedzi to amadede, agbalẽtata, nuŋɔŋlɔ, alo anyigbadzidɔwɔwɔ me. Ele be woaɖo kpe xɔtutua tututu dzi na klass si wotia.
Sika si wotsɔ brɔs ƒoe naa atsyɔ̃ɖoɖo ƒe nɔnɔme si me dzo le wu eye wònyea atsyɔ̃ɖoɖo wu, gake klosalo si wotsɔ brɔs ƒoe ya nana wòdzena abe ɖe wòfa wu, nɔa dzadzɛ wu, eye wòdzena abe dɔwɔƒewo ene. Woate ŋu atrɔ asi le wo ame evea siaa ŋu le gbeɖiɖi, keklẽ, nɔnɔme, kple keklẽ nu.
Ɛ̃. Woate ŋu adzro sika, klosalo, akɔbli, akɔbli, champagne, rose-sika, tu, kple ga ƒe mɔfiame bubuwo me ɖekae kple ɖa nyui, brɔs dzɔdzɔe, atitsoga, alo dɔa koŋ ƒe nɔnɔme tiatia.
Nusiwo wozãna tsɔ wɔa anyigbae dometɔ aɖewoe nye MDF, particle board, plywood, kple xɔmenuwo ƒe akpa bubu siwo sɔ. Ele be woazã substrate ƒe anyigba ŋutɔŋutɔ, primer, adhesive, dɔwɔnuwo, kple dɔwɔwɔ ƒe nɔnɔmewo atsɔ aɖo kpe edzi.
Woate ŋu ada dzesi siwo sɔ kpɔ hena membrane alo vacuum pressing. Ele be woado film ƒe titrime, eƒe didime, eƒe nɔnɔme ƒe liƒo, eƒe wɔwɔme ƒe goglome, dzogoe ƒe didime, dzoxɔxɔ, nusi léna ɖe nu ŋu, kple fafa ƒe tsatsam kpɔ hafi awɔe.
Adzɔnuwo ƒe megbedede kple adhesive ƒe nɔnɔme nɔ te ɖe nɔnɔme si ŋu woɖo kpee dzi. Zi geɖe la, xɔmenuwo ƒe laminating grades zãa aŋenu si wotia ɖe vovo, eyata ele be nuƒlelawo nagblɔ nenye be yewohiã film si meléna ɖe nu ŋu o, megbedede ƒe atikewɔwɔ, alo xɔ bubu.
PVC ƒe anyigba ate ŋu anɔ te ɖe xɔme ƒe tsidzadza si sɔ nu, gake akpa si wowɔ vɔ la mete ŋu gena ɖe eme le eɖokui si o. Tsi ƒe dɔwɔwɔ nɔ te ɖe nusi wotsɔ blae, nusi wotsɔ léa nu ɖe nu ŋu, nusiwo wotsɔ blae, eƒe goawo, nusiwo wotso, kple eɖoɖo dzi. Teƒe siwo tsi le hiã be woado wo kpɔ bliboe le ʋuƒoa dzi eye woatre nugbɔ nyuie.
Woate ŋu ana anyigbadzinu siwo te ŋu nɔa te ɖe ʋuʋudedi nu, gake tsitretsitsi ŋutɔŋutɔ nɔ te ɖe nusi wotsɔ blae kple dodokpɔmɔnu dzi. Na abrasion alo scratch dzidzenu si hiã kple lɔlɔ̃ ɖe edzi ƒe seƒe ne èle biabiam be woayɔ ye.
Ẽ, woate ŋu abu eŋu na xɔme nuɖaze ƒe kabinet ƒe ŋgɔgbe kple eƒe akpawo ne wozã film ƒe grade, substrate, adhesive, edge sealing, kple installation mɔnu si sɔ. Na nuawo nanɔ adzɔge tso dzoxɔxɔ gã si dzi womeda asi ɖo o gbɔ eye nàdo akpa bliboa kpɔ be nɔnɔme siwo nèle mɔ kpɔm na hã.
Amadede ƒe liƒo nɔ te ɖe amadedewo, nusi wotsɔ blae, dzoxɔxɔ, atike siwo wotsɔna klɔa nu ŋu, ŋkeke ƒe keklẽ, kple UV ƒe keklẽ dzi. Le teƒe siwo ɣe ƒe keklẽ sesẽ le alo tsitsi ƒe nudidi sesẽwo le gome la, na dodokpɔ ƒe dzidzenu si hiã kple nɔnɔme siwo me woakpɔe le hafi nàtia nusiwo woatsɔ awɔe.
Tsɔ avɔ falɛfalɛ tutu edzi, eye anyo wu be nàwɔ ɖe mɔfiame si wotsɔ brɔs ƒoe dzi. Zã tsi dzadzɛ alo atike fafɛ si mewɔa akpa aɖeke o. Ƒo asa na aŋekotoku siwo me mekɔ o, atike siwo wotsɔna ƒoa aŋɔe, dɔwɔnu ɖaɖɛwo, atike sesẽwo, aɖi, kple alkali negbe ɖe wodo woƒe hatsotso si nètia kpɔ hafi.
Ɛ̃. Wokafu film ŋutɔŋutɔ ƒe kpɔɖeŋu kple dodokpɔ ƒe akpa si wowu enu hena amadede, brɔs ƒe mɔfiame, keklẽ, nɔnɔme, nusiwo wotsɔna léa nu ɖe nu ŋu ƒe ɖekawɔwɔ, wɔwɔme ƒe nɔnɔme, anyigba ƒe nyonyome, kple dzadzɛnyenye ƒe dɔwɔwɔ me dzodzro hafi woabia nu gbogbo aɖe.
Nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake nɔ te ɖe nenye be atsyã si wowɔ ɖe ɖoɖo nu alo esi wowɔ ɖe ɖoɖo nu, kpakple amadede, nɔnɔme, titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, nusi wotsɔ blae, megbedede, ametakpɔnu, kple nubablɛwo dzi. Mitsɔ nyatakaka si hiã la ɖo ɖa be woaɖo kpe edzi.
Na ga ƒe amadede, brushed texture, gloss, titrime, kekeme, roll ƒe didime, core size, substrate, lamination mɔnu, ezazã, agbɔsɔsɔme, teƒe si woayi, ametakpɔ film, packaging, kple dodokpɔ ŋuti nuŋlɔɖi siwo hiã. Amadede ŋutɔŋutɔ ƒe nufiame ana amadede si wowɔ ɖe ɖoɖo nu ƒe nyateƒetoto nanyo ɖe edzi.
