|
Wallis -PVC ƒe Agbalẽ
Wallis ye nye esia
| Amadede: | |
|---|---|
| Nusi wotsɔ wɔe: | |
| viɖe: | |
| Agbɔsɔsɔ: | |
Wallis customized thickness skin-touch PVC furniture film nye premium atsyɔ̃ɖoɖo ƒe anyigbadzinu si woto vɛ na nuɖazewo, awudzraɖoƒe ʋɔtruwo, xɔmenuwo ƒe akpawo, eme ʋɔtruwo, gli ƒe akpawo, agbalẽdzraɖoƒewo, amedzrodzeƒe xɔmenuwo, ɔfis xɔmenuwo, asitsanuwo, kple xɔme atsyɔ̃ɖoɖodɔ bubuwo.
Matte falɛfalɛa naa asi ƒe seselelãme si le gbadzaa, dzoxɔxɔ, eye wòle abe velvet ene esime wòkpena ɖe asibidɛ ƒe dzesi siwo wokpɔna kple gbesiagbe ɖiƒoƒo dzi ɖeɖe kpɔtɔ ŋu. Woate ŋu adzro eƒe titrime, amadede, nɔnɔme, kekeme, agbalẽ xatsaxatsa ƒe didime, megbedede ƒe atikewɔwɔ, kple ametakpɔnu bablawo me le nuƒlela ƒe nusi wotsɔ wɔe, wo ŋudɔwɔwɔ ƒe mɔnu, xɔmenuwo ƒe nɔnɔme, kple ewɔwɔ ƒe nudidiwo nu.
Wotrɔ asi le eŋu na xɔmenuwo wɔlawo, kabinet dɔwɔƒewo, panel laminators, mamalawo, kple OEM xɔmenuwo ƒe ŋkɔwo, woate ŋu ada atsyɔ̃ɖoɖo PVC film sia si te ŋu trɔna bɔbɔe la kpɔ hena lamination gbadzaa, vacuum alo membrane pressing, profile wrapping, hot pressing, kple tiatia curved furniture components.
Bia be woatsɔ Skin-Touch PVC Film Kpɔɖeŋu
| Adzɔnuwo ƒe Ŋkɔ | Dekɔnu Titrime Ŋutilã-Kaka PVC Furniture Film |
|---|---|
| Nu | PVC atsyɔ̃ɖoɖo xɔmenuwo film |
| Anyigbadzi Seselelãme | Kakaɖedzi fafɛ, ŋutigbalẽ ƒe asikaka ame ŋu, velvet asikaka eŋu, peach-skin feel, alo asikaka ame ŋu si wowɔ ɖe ɖoɖo nu |
| Nukpɔkpɔ ƒe Nuwuwu | Super matte, deep matte, low gloss, alo nusi wowɔ ɖe ɖoɖo nu ƒe nuwuwu nenye be woda asi ɖe kpɔɖeŋua dzi |
| Eƒe titrime | Trɔ asi le eŋu le substrate, dɔwɔwɔ ƒe mɔnu, wɔwɔ ƒe goglome, anyigba ƒe nudidi, kple dɔwɔwɔ nu |
| Amadede Kple Atsyɔ̃ɖoɖo | Amadede sesẽwo, atikutsetsewo, kpe xɔasi si nye marble, kpe, avɔwo ƒe gbɔgbɔ, kple atsyɔ̃ɖoɖo ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu |
| Tiatia Siwo Le Anyigba Dzi | Nusiwo tsi tre ɖe asibidɛwo ƒe dzesiwo ŋu, esiwo me ɖiƒoƒo o, esiwo me ʋuʋudedi mele o, esiwo ŋu kɔklɔ bɔbɔe, kple nu bubu siwo wɔa dɔ siwo woate ŋu atsɔ aɖo kpe woƒe dzeside dzi |
| Dɔwɔwɔ ƒe Mɔnuwo | Flat lamination, membrane tete, vacuum wɔwɔ, profile wrapping, dzoxɔxɔ tete, kple tiatia edge-covering mɔnuwo |
| Substrates Siwo Wozãna Bɔbɔe | MDF, particle board, plywood, fiberboard, kple xɔmenuwo ƒe substrate bubu siwo sɔ le dɔwɔwɔ ƒe kpeɖodzi megbe |
| Dɔbiagbalẽviwo | Kabinetwo, awudzraɖoƒewo, ʋɔtru siwo le eme, gliwo, xɔmenuwo ƒe ŋgɔgbe, ɔfis xɔmenuwo, amedzrodzeƒewo, asitsanuwo, kple atsyɔ̃ɖonuwo |
| Trɔ asi le eŋu | Titrime, amadede, atsyɔ̃ɖoɖo, embossing, gloss, asikaka, kekeme, agbalẽ xatsaxatsa ƒe didime, megbedede, ametakpɔnu film, ŋkɔwo, kple nubablɛwo |
De dzesii: Ele be woaɖo kpe eƒe titrime mamlɛtɔ, kekeme, agbalẽ xatsaxatsa ƒe didime, eƒe anyigba ƒe dɔwɔwɔ, nusi léna ɖe nu ŋu ƒe ɖekawɔwɔ, nuwɔwɔ ƒe ŋutete, kple nyonyome ƒe mɔɖeɖe ɖe nu ŋu dzi to kpɔɖeŋu si dzi woda asi ɖo, mɔ̃ɖaŋununya ƒe nubabla, kple ewɔwɔ dodokpɔ hafi woawɔe le agbɔsɔsɔ gã me.
Skin-touch PVC furniture film nye atsyɔ̃ɖoɖo ƒe anyigba film si ƒe asikaka nu fafɛ, si le gbadzaa, eye wòle abe velvet ene. Woate ŋu agblɔ hã be enye PVC-gbadzɛ si wotsɔa asi ka fafɛ, vidzĩ ƒe ŋutigbalẽ film, peach-lãgbalẽ film, suede-ka asi film, alo xɔmenuwo ƒe agbalẽvi si ƒe amadede nye matte ŋutɔ. Woɖoe be woatsɔ awɔ xɔmenuwo ƒe nɔnɔme siwo me nukpɔkpɔ ƒe dzedzeme kple asi ƒe seselelãme siaa kpɔa ŋusẽ ɖe nusi wosusu be adzɔnuwo ƒe nyonyome dzi le.
To vovo na xɔmenuwo ƒe sinima si klẽna ɖaa la, ne wotsɔ ŋutigbalẽ ka asi eŋu la, eɖea keklẽ si dzena la dzi kpɔtɔna eye wònana wòdzena abe ɖe wòxɔ dzo wu eye wòfa tu. Esia na wòsɔ na kabinet ʋɔtru siwo ŋu asiléƒe mele o, awudzraɖoƒewo, xɔdɔme me xɔmenuwo, ɔfis ɖoɖowo, amedzrodzeƒewo ƒe nuzazãwo, gliwo ƒe xɔmenuwo, kple asitsaƒe ƒe xɔmenuwo ƒe xɔmenuwo.
Woate ŋu atsɔ asibidɛ ƒe dzesi si tsi tre ɖe asibidɛ ƒe dzesi ŋu kple dɔwɔwɔ si ŋu kɔklɔ bɔbɔe akpe ɖe eŋu to nusi wotia be woatsɔ atsyɔ anyigba dzi la dzi. Esi wònye be dɔwɔwɔ toa vovo le film ƒe dzeside, amadede, keklẽ, dodokpɔmɔnu, atike si wotsɔ klɔa nu ŋu, kple nuto si me wozãnɛ le mlɔeba nu ta la, ele be nuƒlelawo nada kpɔɖeŋu si le teƒenɔla kpɔ tsɔ wu be woaɖo ŋu ɖe nɔnɔme ŋuti nuŋlɔɖi si bɔ ŋu ko.
Anyigba falɛfalɛa naa xɔmenuwo ƒe ŋgɔgbewo ƒe asi-se le wo ɖokui me si ŋu wokɔ si ate ŋu akpe ɖe wo ŋu woade vovototo nuƒoƒoƒu siwo de ŋgɔ wu kple nusiwo wotsɔ lãgbalẽ wɔe siwo wozãna ɖaa dome. Asikaka nu ŋu ƒe ŋusẽkpɔɖeamedzia le vevie ŋutɔ le ʋɔtruwo, agbalẽdzraɖoƒewo, awudzraɖoƒewo, kplɔ̃wo, kplɔ̃wo, kple xɔtunu siwo zãlawo ka asi enuenu ŋu.
Matte si me goglo ƒe nuwuwu ɖea nukpɔkpɔ sesẽ dzi kpɔtɔna eye wònaa anyigba si dzi woate ŋu akpɔ fafa le la nɔa anyi. Ewɔa dɔ nyuie kple egbegbe amadede sesẽwo, dzɔdzɔme atikutsetsewo, kpe, ga, ahuhɔ̃e, kple xɔmenuwo ƒe xɔmenuwo, si doa alɔ xɔmenuwo ƒe atsyã siwo mebɔ o, siwo me dzo le, kple esiwo le atsyɔ̃ɖoɖo me.
Nusiwo wotsɔ blaa nu tiatia aɖewo kpena ɖe ame ŋu be asibidɛwo, ami ƒe dzesiwo, kple ʋuʋudedi siwo le xɔmenuwo ƒe anyigba siwo ŋu wotsɔa asi ƒoa nui enuenu la megadzena o. Esia ɖea vi ŋutɔ na amadede dzẽ siwo ƒe amadede nye matte, kabinet ƒe ŋgɔgbe si ŋu asiléƒe mele o, awudzraɖoƒe ƒe ʋɔtruwo, ɔfis xɔmenuwo, kple asitsaƒewo ƒe ɖeɖefiawo.
Woate ŋu agblɔ PVC film na anyigba gbadzawo, nɔnɔmetata siwo woxatsa, go siwo woƒo, ʋɔtru siwo woto, kple akpa siwo wowɔ tiatia. Xɔtutu si sɔ nɔ te ɖe eƒe titrime, plasticization, nusi wotsɔ blae, embossing, wɔwɔme ƒe goglome, didime, nusi léna ɖe nu ŋu, dzoxɔxɔ, nyaƒoɖeamenu, kple fafa ƒe nɔnɔmewo dzi.
Titrime si wowɔ ɖe ɖoɖo nu nana be woate ŋu ada asɔ le film la me be wòate ŋu atrɔ ɖe nɔnɔmewo ŋu, wòate ŋu adze ƒã, eƒe nɔnɔme ƒe goglome, eƒe asiléle, eƒe wɔwɔme ƒe nuwɔna, kple eƒe anyigba takpɔkpɔ. Ele be woatia dzeside si sɔ le board ŋutɔŋutɔ, profile geometry, mɔ̃, adhesive, dɔwɔwɔ ƒe duƒuƒu, kple taɖodzinu xɔmenuwo zazã nu.
Amadede sesẽwo, atikutsetsewo, kpe xɔasi si nye marble, kpe, avɔwo ƒe nɔnɔme, kple atsyã siwo wowɔ ɖe ɖoɖo nu ate ŋu akpe ɖe xɔmenuwo ƒe adzɔhawo ŋu woawɔ nuƒoƒoƒu siwo wɔ ɖeka. Ele be nuƒlelawo nada asi ɖe amadede, nɔnɔmetata ƒe dzidzenu, embossing, gloss, kple asikaka nu ŋu to ŋutilã me kpɔɖeŋuwo zazã me le akaɖi si woɖo be woazã te.
Film ƒe titrime kpɔa ŋusẽ ɖe asitɔtrɔ le nɔnɔmewo ŋu, opacity, yame ƒe seselelãme, embossing gɔmesese, dɔwɔwɔ ƒe liƒo, nugbɔ ƒe nuwɔna, kple nuawo ƒe gazazã bliboa dzi. Tiatia si le kpekpem wu la menye tiatia nyuitɔ le eɖokui si o; nɔnɔme si sɔ lae nye esi naa emetsonu siwo li ke le nuƒlela ƒe dɔwɔnuwo kple panel si wowu enu dzi.
| Dɔwɔwɔ ƒe Nudidi | Titrime Tiatia Bubu | Nusiwo Woatsɔ Aɖo Kpe |
|---|---|---|
| Lamination si le gbadzaa | Da sɔ le anyigba ƒe gbadzaƒe, opacity, rigidity, agbalẽ xatsaxatsa ƒe asiléle, kple adhesive transfer | Bond ƒe ŋusẽ, bubbles, telegraphing, gloss consistency, kple cutting quality |
| Membrane alo Vacuum ƒe Teteɖeanyi | Tia asitɔtrɔ kple didime si sɔ na routed profiles, dzogoewo, kple formed edges | Goglome wɔwɔ, dzogoe ƒe ɣie, nɔnɔme ƒe tɔtɔ, adhesive ƒe dɔwɔwɔ, kple fafa |
| Profile Wrapping | Zã dzeside si sɔ kple profile geometry, line speed, tension, kple radii suewo | Edge lifting, spring-back, wrinkle wɔwɔ, adhesive tsidzadza, kple trim ƒe nyonyome |
| Xɔmenuwo ƒe Ŋgɔgbe Siwo Ka asi Ŋusẽ | Tsɔ asikaka nu ŋu ƒe ɖekawɔwɔ, nutsyɔnu ƒe anyinɔnɔ, nusi me mekɔ o, kple eƒe anyigba takpɔkpɔ ɖo nɔƒe gbãtɔ | Asibidɛ ƒe dzesi ƒe dzedzeme, ʋuʋudedi ƒe tsitretsitsi, ɖiƒoƒo ƒe tsitretsitsi, dzadzɛnyenye, kple eƒe vuvu |
| Nusiwo Wozãna le Agbɔsɔsɔme Gãwo Me Si Woxena Ðe Gazazã Ŋu | Trɔ asi le eƒe titrime ŋu nyuie wu evɔ màtsɔ dzedzeme si hiã kple dɔwɔwɔ ƒe liƒo asa vɔe o | Nuku, agbalẽ xatsaxatsa ƒe ɖekawɔwɔ, kakɛ ƒe agbɔsɔsɔme, fli ƒe duƒuƒu, nuwuwu ƒe nyonyome, kple subɔsubɔdɔ ƒe dɔwɔwɔ |
Ne èle biabiam be woawɔ eƒe titrime si wowɔ ɖe ɖoɖo nu la, na substrate ƒe ƒomevi, board ƒe didime, anyigba dzi dzadzraɖo, dɔwɔwɔ ƒe mɔnu, wɔwɔ ƒe goglome, minimum radius, adhesive system, dɔwɔnu ƒe kpɔɖeŋu, line ƒe duƒuƒu, dɔwɔwɔ ƒe dzoxɔxɔ, nyaƒoɖeamenu, kple dɔwɔwɔ vɔ. Nyatakaka sia kpena ɖe ame ŋu be woaɖe kpɔɖeŋuwo xɔxɔ ƒe tsatsam kple afɔku si le ewɔwɔ me dzi akpɔtɔ.
Amadede sesẽwo sɔ na egbegbe kabinet, awudzraɖoƒe, ɔfis, xɔdɔme, kple asitsaƒewo ƒe xɔmenuwo nuƒoƒoƒu. Woate ŋu awɔ amadede siwo mewɔa akpa aɖeke o siwo nye beige, ɣi, grey, black, blue, green, brown, kple dɔa koŋ ƒe amadedewo ne woɖo kpe kpɔɖeŋu kple ewɔwɔ dzi.
Ati siwo wotsɔ ati wɔe la ƒoa dzɔdzɔme nukpɔkpɔ ƒe nɔnɔme kple asikaka fafɛ si le gbadzaa nu ƒu. Ele be woada kpɔɖeŋua gbugbɔgagblɔ, tata ƒe mɔfiame, embossing ƒe ɖoɖowɔwɔ, amadede ƒe dadasɔ, kple adjacent-panel ƒe sɔsɔ kpɔ le kpɔɖeŋu xɔɣi.
Marble, kpe, avɔ, lãgbalẽ, kple atsyɔ̃ɖonu bubuwo ate ŋu ado alɔ gliwo, asitsaƒewo ƒe xɔmenuwo, amedzrodzeƒewo ƒe xɔmenuwo, amedzrodzeƒewo, awudzraɖoƒewo, kple xɔmenuwo ƒe ɖoɖo siwo wowɔ ɖekae. Ele be woato nɔnɔmetata gãwo me le akpa si wowɔ vɔ ƒe lolome nu hafi woada asi ɖe wo dzi.
Woate ŋu atsɔ asibidɛ ƒe dzesi si tsi tre ɖe asibidɛ ƒe dzesi ŋu, ɖiƒoƒo, dzadzɛnyenye bɔbɔe, ƒoƒo, alo eƒe gota gome ƒe atike bubuwo awɔ sinima la le hatsotso si nètia nu. Ele be woalɔ̃ ɖe dodokpɔmɔnu siwo hiã kple seɖoƒe siwo dzi woaxɔ wo dzi hafi awɔ wo le agbɔsɔsɔ gã me.
Wozãa MDF zi geɖe na xɔmenuwo ƒe ŋgɔgbe gbadzawo, kabinet ʋɔtru siwo wotsɔ mɔ ɖo, awudzraɖoƒe ƒe ʋɔtruwo, ʋɔtru siwo le eme, kple gli ƒe akpa siwo woɖo atsyɔ̃ na. Ele be ʋuƒoa nanɔ gbadzaa, wòaƒu, wòanɔ dzadzɛ, wòali ke, eye ke alo eƒe gotaƒe ƒe nɔnɔme madeamedzi aɖeke naganɔ eme hafi woatsɔe ablae o.
Woate ŋu azã nusuekpɔmɔ̃ kple plywood na xɔmenuwo ƒe akpa gbadzawo kple xɔmenuwo ƒe akpa tiatia aɖewo le sanding, dede, priming, alo anyigbadzinuwo dzadzraɖo nyuie vɔ megbe. Bonding ƒe dɔwɔwɔ nɔ te ɖe board mo ŋutɔŋutɔ kple adhesive system dzi.
Flat lamination sɔ na cabinet panels, awudzraɖoƒe ƒe ʋɔtruwo, kplɔ̃ ƒe akpawo, agbalẽdzraɖoƒewo, gli ƒe akpawo, asitsaƒewo ƒe nuzazãwo, kple flat board bubuwo. Kpɔ adhesive coating, nip pressure, dzoxɔxɔ, line ƒe duƒuƒu, tension, kple fafa dzi be wòalé matte ƒe anyigba si sɔ pɛpɛpɛ me ɖe asi.
Woate ŋu ada dzesi siwo sɔ siwo te ŋu trɔna bɔbɔe la akpɔ na MDF ʋɔtru siwo woɖo mɔ na, kabinet ƒe ŋgɔgbe siwo ƒe nɔnɔme le abe, woƒe go siwo woƒo, kple akpa etɔ̃ siwo wotia. Ele be woado alesi wowɔe ƒe goglome, dzogoe ƒe didime, alesi wòléa nu ɖe te, dzoxɔxɔ ƒe tsatsam, alesi wòléa nu ɖe nu ŋu ƒe dɔwɔwɔ, vacuum ƒe sesẽme, kple fafa ƒe dɔwɔwɔ kpɔ.
Profile wrapping ate ŋu awɔ soft-touch finish la ŋudɔ le mouldings, ʋɔtruwo ƒe xɔmenuwo, trims, shelves, furniture ƒe gowo, kple ati tiatia aɖewo, PVC, WPC, aluminium, alo composite profiles ŋu le dodokpɔ be wosɔ ɖe wo nɔewo nu vɔ megbe.
Ele be adhesive tiatia nabu film ƒe megbedede, substrate, dɔwɔnuwo, dɔwɔwɔ ƒe dzoxɔxɔ, nyaƒoɖeamenu, ʋuʋu ɣeyiɣi, ewɔwɔ ƒe duƒuƒu, fafa, dzoxɔxɔ ƒe ɖeɖefia, kple finished-panel ƒe nudidiwo ŋu. Zã nusiwo wowɔ ŋutɔŋutɔ hena kadodo ƒe ŋusẽ kple tsitsi dodokpɔwo.
PVC film si wotsɔ ka asi ŋutigbalẽ ŋu naa nuɖaƒe ƒe ŋgɔgbewo dzena abe matte ene le gbadzaa eye woate ŋu aka asi wo ŋu nyuie. Tiatia siwo tsi tre ɖe asibidɛ ƒe dzesi ŋu ɖea vi ŋutɔ na ʋɔtru siwo ŋu asiléƒe mele o kple amadede sesẽ siwo do viviti. Ele be woado xɔtunu blibowo kpɔ be dzoxɔxɔ, fafa, dzadzɛnyenye, nugbɔ ƒe nutrenu, kple nulénu ƒe dɔwɔwɔ hã.
Awudzraɖoƒe ƒe ʋɔtruwo, abadzivɔwo, awuɖɔlikplɔ̃wo, agbalẽdzraɖoƒe ƒe ŋgɔgbe, kple xɔdɔme ƒe akpa siwo wowɔ ɖe ɖoɖo nu ɖea vi tso anyigba si me dzoxɔxɔ le si me keklẽ mele o la me. Ele be ʋɔtru gã siwo te ɖe wo nɔewo ŋu nazã batch si dzi woda asi ɖo kple film ƒe mɔfiame si mewɔa tɔtrɔ o hena nukpɔkpɔ ƒe sɔsɔ nyuie wu.
Woate ŋu azã sinima la le ʋɔtru siwo sɔ ɖe enu, gli siwo wotsɔa nu vovovowo wɔe, abadzivɔwo, atsyɔ̃ɖonuwo ƒe mamawo, amedzrodzeƒewo ƒe megbenyawo, kple xɔmenuwo ƒe ɖoɖo siwo wowɔ ɖekae dzi. Anyigbadzinu, goawo, ƒunukpeƒewo, kple eɖoɖomɔnue afia alesi kpekpe bliboa awɔ dɔe.
Ɔfis kplɔ̃wo, nudzraɖoƒewo, amedzrodzeƒewo, amedzrodzeƒewo ƒe nuzazãwo, nuɖuɖudzraƒewo ƒe xɔmenuwo, fiase me nuzazãwo, nukpɔkpɔwo, kple asitsaƒewo ate ŋu azã film si wotsɔa ŋutigbalẽ ka asi ŋudɔ atsɔ awɔ dzedzeme nyuitɔ si nɔa anyi ɖaa. Ele be dɔ siwo me ʋuwo sɔa gbɔ ɖo la nagblɔ dodokpɔ siwo hiã be woawɔ le aŋɔsisi, ɖiƒoƒo, dzadzɛnyenye, kple atikewo ƒe tsitretsitsi ŋu.
PVC, PETG, PP, acrylic, kple anyigba siwo dzi wota nu ɖo la katã ate ŋu ana xɔmenuwo nawu enu matte, gake woƒe dɔwɔwɔ ƒe nɔnɔme, woƒe anyigba ƒe wɔwɔme, gazazã, kple woƒe dɔwɔwɔ ƒe dzesi siwo li la to vovo. Tabla si gbɔna nye tiatiawɔblɔɖe ƒe mɔfiame si wozãna le mɔ gbadza nu tsɔ wu be wòanye mɔ̃ɖaŋu ŋuti nyatakakawo kple dodokpɔwo wɔwɔ teƒe.
| Tiatia Nu Ŋutilã | -Kaka PVC Film | PETG alo PET Furniture Film | PP Furniture Film | Da alo Lacquered Panel |
|---|---|---|---|---|
| Anyigba ƒe Anyigba si Wozãna Typical | Matte falɛfalɛ, embossed, tata, kple atsyɔ̃ɖoɖo ƒe ŋusẽkpɔɖeamedzi siwo te ŋu trɔna bɔbɔe | Matte alo gloss ƒe anyigba siwo le gbadzaa kple nusiwo wotsɔ blaa grade-specific | Matte, textured, printed, alo solid-amadede ƒe anyigbawo | Seamless sprayed alo roller-coated amadede wu enu |
| Trɔtrɔ Ðe Nɔnɔmewo Ŋu ƒe Nɔnɔmewɔwɔ | Dzeside siwo sɔ ate ŋu ado alɔ babla kple 3D wɔwɔ | Enɔ te ɖe film ƒe wɔwɔme, eƒe titrime, eƒe nutsyɔtsyɔ, kple alesi wòwɔe dzi | Enɔ te ɖe grade, titrime, kple alesi wozãnɛ dzi | Wozãnɛ le substrate ƒe nɔnɔme wɔwɔ vɔ megbe tsɔ wu be woawɔe abe film ene |
| Trɔ asi le eŋu | Tiatia gbadzawo le titrime, atsyɔ̃ɖoɖo, embossing, asikaka, kple agbalẽ xatsaxatsa ƒe lolome me | Amadede, keklẽ, nusi wotsɔ blae, eƒe titrime, kple eƒe lolome nɔ te ɖe amesi tsɔe vɛ dzi | Amadede, nɔnɔme, nɔnɔme, titrime, kple kekeme nɔ te ɖe nudzrala dzi | Amadede gbadzaa ƒe asitɔtrɔ le nu ŋu kple nutsyɔtsyɔ-dɔwɔwɔ ƒe nudidiwo |
| Nusiwo Woawɔ Ŋu Bubu | Ebia be woatsɔ nulénu, dzoxɔxɔ, nyaƒoɖeamenu, kple teteɖeanyi si sɔ | Ebia be lamination ɖoɖo si sɔ kple anyigbadzidɔwɔwɔ nyuie | Ebia be woawɔ kadodo alo extrusion-lamination ƒe ɖoɖo si sɔ | Ebia be woadzrae ɖo, atsyɔ nu edzi, ada gbe le eŋu, ya age ɖe eme, eye woakpɔ edzi |
| Dɔwɔwɔ ƒe Fit si Bɔ | Kabinetwo, ʋɔtru siwo woɖo ɖe mɔ dzi, nɔnɔmetatawo, awudzraɖoƒewo, xɔmenuwo, kple xɔmenuwo ƒe lolome gã | Premium flat fronts, furniture panels, kple tiatia siwo wowɔ dɔdamɔnu | Fuɖenamenuwo, gliwo, kple atsyɔ̃ɖoɖo ƒe ɖoɖo tiatia aɖewo | Kabinet siwo wowɔ ɖe ɖoɖo nu kple xɔmenuwo siwo wota nyuie |
Screen nɔnɔmetatawo mate ŋu atsi tre ɖi na asikaka ame ŋu fafɛ ƒe seselelãme, keklẽ ƒe sesẽme, embossing, alo amadede ƒe vovototo siwo menya kpɔna dzea sii bɔbɔe o. Da asi ɖe film ŋutɔŋutɔ ƒe kpɔɖeŋu kple laminated panel si wowɔ vɔ dzi le akaɖi si woɖo be woawɔ la te hafi nàɖo kpe ewɔwɔ le agbɔsɔsɔ gã me dzi.
Ðe ke, ami, tsi, ka, ʋuʋudedi, sanding dzesiwo, kple nusiwo le gbadzaa ɖa. Matte-kpewo ate ŋu aɖe telegraph alo masɔmasɔ si tso ʋuƒo si le ete la gbɔ afia kokoko, vevietɔ le ʋɔtru gã gbadza siwo le gbadzaa kple amadede sesẽ dovivitiwo dzi.
Zã film ŋutɔŋutɔ, nusi wotsɔ léa nu ɖe nu ŋu, nusi wotsɔna léa nu ɖe nu ŋu, dɔwɔnuwo, dzoxɔxɔ, nyaƒoɖeamenu, duƒuƒu, vacuum ƒe tsatsam, kple fafamɔnu. Kpɔ alesi wòlé ɖe nu ŋu, dzogoewo, goawo, kuɖɔwo, flitetewo, amadede, keklẽ, nɔnɔme, keke, ʋuʋudedi, kple eƒe gowo ƒe gbegblẽ ɖa.
Ele be nuƒle ŋuti nuŋlɔɖiwo naɖe alesi woda asi ɖe edzi le titrime kple kekeme dzi, amadede ƒe vovototo, keklẽ ƒe didime, embossing, asikaka, agbalẽ xatsaxatsa ƒe didime, ƒunukpeƒewo, nugbɔ ƒe nɔnɔme, nusi wotsɔ blae ƒe dzedzeme, ametakpɔnu babla, kple ŋutilã alo atike dodokpɔ siwo hiã.
Zã kplɔ̃ siwo le dzadzɛ, agbalẽ xatsaxatsawo, asigɛwo, dɔwɔnu siwo wotsɔ lãa nu, kple nusiwo wobla ɖe agba me. Ƒo asa na nuƒoƒoƒu ƒe nyaƒoɖeamenu fũ akpa, ke, ɖiƒoƒo nusiwo léna ɖe nu ŋu, nu ɖaɖɛwo, kple xɔtunu siwo wowɔ vɔ hehe ɖe teƒe siwo le gbadzaa dzi.
Tsɔ microfiber avɔ dzadzɛ falɛfalɛ aɖe ɖa ke si me mekɔ o.
Zã tsi dzadzɛ alo atike fafɛ si mewɔa akpa aɖeke o hena dzadzɛnyenye edziedzi.
Tutu ami, nunono, nuɖuɖu, atsyɔ̃ɖomi, nuŋlɔtsi, kple ɖi bubuwo enumake.
Ƒo asa na gakpo ƒe lãfu, aŋetu siwo wotsɔna ƒoa lãe, aŋekotoku siwo me mekɔ o, akplɔwo, kple dɔwɔnu ɖaɖɛwo.
Mègazã atike sesẽwo, acid, alkali, alo dɔlékuiwutike siwo dzi womeda asi ɖo o.
Do atike siwo wodzrana tsɔ klɔa nu ŋu kpɔ le kpɔɖeŋu si dzi woda asi ɖo dzi hafi nàzãe edziedzi.
Asibidɛ ƒe dzesi si tsi tre ɖe eŋu mefia be eƒe gota mate ŋu aɖe dzesiwo afia gbeɖe o. Nukpɔkpɔ kple dzadzɛnyenye ƒe nuwɔna toa vovo le ŋutigbalẽ ƒe ami, amadede, akaɖi, keklẽ, nutsyɔtsyɔ, dzadzɛnyenye zi gbɔ zi geɖe, kple eƒe vuvu nu. Ele be woatsɔ dzadzɛnyenye kple beléle na mɔnu si woɖo be woazã la ade dɔa dodokpɔ me.
Woate ŋu aƒo nu tso eƒe titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, nu vevi ƒe lolome, mɔ si dzi woaƒoe ɖo, agbalẽ xatsaxatsa ƒe kpekpeme, ƒunukpeƒe ƒe mɔɖeɖe, kple eƒe babla ŋu le asisi la ƒe lamination alo forming line nu. Kpɔ kekeme si woate ŋu azã kple mɔ̃a ƒe mɔfiame dzi hafi nàbia.
Nuƒlelawo ate ŋu ana amadede ŋutɔŋutɔ ƒe chip, xɔmenuwo ƒe akpa si dzi woda asi ɖo, atsyɔ̃ɖoɖo ŋuti nyatakaka si wota, alo embossing ƒe kpɔɖeŋu. Ele be woaɖo kpe ŋgɔyiyi si wowɔ ɖe ɖoɖo nu ƒe ŋutete, mɔɖeɖe ɖe nu ŋu, agbɔsɔsɔ suetɔ kekeake, kpɔɖeŋuwo xɔxɔ ƒe ɖoɖo, kple ewɔwɔ ƒe lead ƒe nudidiwo dzi hafi abia.
Woate ŋu azã mɔnu siwo dzi wolɔ̃ ɖo atsɔ ada asibidɛ ƒe dzesi, ƒoƒo ƒe tsitretsitsi, ɖiƒoƒo ƒe tsitretsitsi, atike ƒe tsitretsitsi, dzoxɔxɔ ƒe tsitsi, kekeli ƒe ʋuʋu, eƒe léle ɖe nu ŋu, kple nudidi bubuwo kpɔ. Ele be nuƒlelawo nana dzidzenu si sɔ kple lɔlɔ̃ ɖe edzi ɣesiaɣi si dɔwɔwɔ ŋuti nya aɖe le vevie ŋutɔ.
Woate ŋu adzro ametakpɔnu babla, nuwuwu takpɔkpɔ, dzesidewo, batch ƒe dzeside, pallet mɔnu, kakɛwo, meliɖoɖo ƒe dzesiwo, kple dɔa koŋ ƒe bablawo me hena dɔdɔ kple OEM nudɔdɔwo.
Custom thickness support: woate ŋu adzro nɔnɔme tɔxɛwo me na flat lamination, membrane pressing, wrapping, kple xɔmenuwo ƒe dɔwɔwɔ vovovowo.
Atsyɔ̃ɖoɖo ƒe asitɔtrɔ le nɔnɔmewo ŋu: amadede sesẽwo, atikutsetsewo, kpe xɔasi, kpe, nusiwo wotsɔ avɔ wɔe, kple atsyã siwo wowɔ ɖe ɖoɖo nu.
Dɔwɔwɔ ƒe anyigba ƒe tiatia: asikaka fafɛ, matte goglo, asibidɛ ƒe dzesi si tsi tre ɖe eŋu, dzadzɛnyenye bɔbɔe, ɖiƒoƒo, kple ƒoƒo-tsitretsitsi ƒe dzesiwo ne woɖo kpe edzi.
B2B dɔa ƒe kpekpeɖeŋu: nɔnɔmewo me toto na xɔmenuwo dɔwɔƒewo, kabinet wɔlawo, laminators, mamalawo, kple OEM dzesiwo.
Kpɔɖeŋu kple dodokpɔ ƒe kpeɖodzi: ŋutilã me kpɔɖeŋuwo kple dodokpɔ si wowɔ vɔ le akpata dzi kpena ɖe ame ŋu be amadede, kadodo, wɔwɔme, kple anyigba ƒe dɔwɔwɔ ƒe afɔkuwo dzi ɖena kpɔtɔna.
Dzro Wò PVC Furniture Film Dɔwɔɖoɖoa me
Be nàxɔ nyayɔyɔ si sɔ la, tsɔ agbalẽ xatsaxatsa ƒe titrime, kekeme, agbalẽ xatsaxatsa ƒe didime si hiã, nu vevi ƒe lolome, amadede alo atsyɔ̃ɖoɖo, embossing, gloss, touch effect, surface-performance requirements, substrate, dɔwɔwɔ ƒe mɔnu, xɔmenuwo zazã, nudɔdɔ ƒe agbɔsɔsɔ, teƒe si woayi, nusiwo wobla, kple dodokpɔ ŋuti nuŋlɔɖi siwo hiã.
Le vacuum alo membrane tete, hã na panel profile, wɔwɔ goglome, minimum radius, adhesive, dɔwɔnu ƒe kpɔɖeŋu, dɔwɔwɔ ƒe dzoxɔxɔ, nyaƒoɖeamenu, kple ewɔwɔ ƒe duƒuƒu. Ne èdi amadede alo nɔnɔme si nèdi la, ɖo nufiame ŋutɔŋutɔ ɖa ɣesiaɣi si wòanya wɔ.
Enye PVC atsyɔ̃ɖoɖo ƒe anyigbadzi film si me asi-se le eɖokui me fafɛ, velvet, si mekɔna tututu o. Wozãnɛ tsɔ wua xɔmenuwo ƒe akpa siwo sɔ, kabinet ƒe ʋɔtruwo, awudzraɖoƒewo, xɔme ʋɔtruwo, gli ƒe akpawo, kple asitsaƒewo ƒe xɔmenuwo nu.
Ɛ̃. Woate ŋu aƒo nu tso titrime ŋu le nusi wotsɔ wɔe, alesi wowɔa nui, eƒe wɔwɔme ƒe goglome, alesi wòte ŋu trɔna ɖe nɔnɔmewo ŋu, eƒe amadede si me mekɔ o, eƒe nɔnɔme, eƒe anyinɔnɔ, dɔwɔnuwo, kple gazazã ƒe taɖodzinu nu. Ele be woaɖo kpe alesi wòate ŋu adzɔ mlɔeba dzi to kpɔɖeŋuwo xɔɣi.
Tiatia siwo tsi tre ɖe asibidɛ ƒe dzesi ƒe anyigba ŋu li. Dɔ si wòwɔna ɖe ame dzi nɔ te ɖe nusi wotsɔ blae, amadede, keklẽ, akaɖi, eƒe awudodo, kple dodokpɔmɔnu dzi, eyata ele be nuƒlelawo nalé ŋku ɖe kpɔɖeŋu aɖe ŋu eye woaɖe dɔwɔwɔ ƒe dzidzenu si wobia la me.
Tiatia ate ŋu anye amadede sesẽwo, atikutsetsewo, kpe xɔasi si nye marble, kpe, nusiwo wotsɔ avɔ wɔe, kple atsyã siwo wowɔ ɖe ɖoɖo nu. Ele be woada asi ɖe amadede, nɔnɔme, embossing, gloss, kple touch dzi to ŋutilã me kpɔɖeŋuwo zazã me.
Ẽ, woate ŋu atsɔ PVC xɔmenuwo ƒe film si sɔ la abla ɖe MDF si wodzra ɖo nyuie dzi. Ele be woaɖo kpe aŋenu ƒe ɖekawɔwɔ, ʋuƒoa ƒe tsidzadza, anyigba ƒe nyonyome, dzoxɔxɔ, nyaƒoɖeamenu, duƒuƒu, kple fafa dzi hafi woawɔe le agbɔsɔsɔ gã me.
Woate ŋu ada dzesi siwo sɔ siwo te ŋu trɔna bɔbɔe la kpɔ na ʋɔtru siwo woto alo esiwo woƒo to membrane alo vacuum pressing zazã me. Ele be woado eƒe wɔwɔme ƒe goglome, eƒe didime, film ƒe didime, eƒe nɔnɔme léle ɖe te, adhesive ƒe dɔwɔwɔ, kple eƒe fafa kpɔ.
Ẽ, woate ŋu azã dzesi tiatia aɖewo hena profile wrapping. Ele be film ƒe titrime, megbedede ƒe atikewɔwɔ, profile geometry, adhesive, preheating, pressure, tension, kple line ƒe duƒuƒu nasɔ kple ewɔwɔ ƒe ɖoɖoa.
Adhesive ƒe nɔnɔme si wozãna ɖaa nɔ te ɖe atike ƒe nɔnɔme si ŋu woɖo kpee dzi. Zi geɖe la, wozãa nusi wotsɔ léa xɔmenuwo ɖe vovo, eyata ele be nuƒlelawo nagblɔ nenye be yewohiã megbedede si ŋu womewɔ atike ɖo o, megbenya si ŋu wowɔ atike ɖo, alo xɔtunu si wotsɔa nu léna ɖe wo ɖokui ŋu.
PVC ƒe anyigba ate ŋu anɔ te ɖe xɔme tsi si sɔ nu, gake xɔmenuwo ƒe akpa bliboa ya mete ŋu gena ɖe eme le eɖokui si o. Tsi ƒe dɔwɔwɔ nɔ te ɖe nusi wotsɔ blae, nusi wotsɔ léa nu ɖe nu ŋu, eƒe goawo, nusiwo wotsɔ blae, nusiwo wotso, kple eɖoɖo dzi.
Woate ŋu akpɔ dzesi siwo te ŋu nɔa te ɖe ʋuʋudedi nu, gake dɔwɔwɔ toa vovo le nusi wotsɔ blae kple dodokpɔmɔnu nu. Ele be nuƒlelawo natsɔ dzidzenu si hiã be woatsɔ aƒoe alo aŋe, agba, dɔwɔnu, tsatsam, kple lɔlɔ̃ ɖe edzi ƒe dzidzenuwo.
Zã avɔ falɛfalɛ dzadzɛ si me tsi le alo atike fafɛ si mewɔa akpa aɖeke o. Ƒo asa na aŋekotoku siwo me mekɔ o, atikekuiwo, nu ɖaɖɛwo, kple atike siwo dzi womeda asi ɖo o. Do asitsanuwo kpɔ le kpɔɖeŋu aɖe dzi hafi nàzãe edziedzi.
Ɛ̃. Wokafu film ƒe kpɔɖeŋu kple dodokpɔ si wowɔ le akpata si wowu enu me hena amadede, keklẽ, asikaka eŋu, nuŋɔŋlɔ, asibidɛ ƒe dzesi ƒe dzedzeme, tsitretsitsi ɖe ʋuʋudedi ŋu, nusiwo wotsɔna léa nu ɖe nu ŋu ƒe ɖekawɔwɔ, nuwɔwɔ ƒe nuwɔna, kple dzadzɛnyenye ƒe dɔwɔwɔ me dzodzro.
Nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake nɔ te ɖe nenye be amadede kple nɔnɔmea sɔ alo wowɔe ɖe ɖoɖo nu, kpakple eƒe titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, nusi wotsɔ blae, eƒe megbe, ametakpɔnu film, kple nusiwo wobla ɖe eŋu dzi. Mitsɔ nyatakaka si hiã la ɖo ɖa be woaɖo kpe edzi.
Na agbalẽ xatsaxatsa ƒe titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, amadede alo atsyɔ̃ɖoɖo, nɔnɔme, keklẽ, anyigba ƒe nudidiwo, nusi le ete, dɔwɔwɔ ƒe mɔnu, panel geometry, agbɔsɔsɔme, teƒe si woayi, babla, kple dodokpɔ ŋuti nuŋlɔɖi siwo hiã. Nufiame ŋutɔŋutɔ nana be custom-development ƒe nyateƒetoto nyona ɖe edzi.
